Search Results

Search found 7211 results on 289 pages for 'enable if'.

Page 46/289 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

  - by user223833

  I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

  Read the article

• How to failover to local account on a cisco switch/router if radius server fails?

  - by 3d1l

  I have the following configuration on a switch that I testing for RADIUS authentication: aaa new-model aaa authenticaton login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius local enable secret 5 XXXXXXXXX ! username admin secret 5 XXXXXXXXX ! ip radius source-interface FastEthernet0/1 radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813 key XXXXXXXXX radius-server retransmit 3 ! line con 0 line vty 5 15 Radius authentication is working just fine but if the server is not available I can not log into the router with the ADMIN account. What's wrong there? Thanks!

  Read the article

• just can't get a controller to work

  - by Asaf

  I try to get into mysite/user so that application/classes/controller/user.php should be working, now this is my file tree: code of controller/user.php: <?php defined('SYSPATH') OR die('No direct access allowed.'); class Controller_User extends Controller_Default { public $template = 'user'; function action_index() { //$view = View::factory('user'); //$view->render(TRUE); $this->template->message = 'hello, world!'; } } ?> code of controller/default.php: <?php defined('SYSPATH') OR die('No direct access allowed.'); class Controller_default extends Controller_Template { } bootstrap.php: <?php defined('SYSPATH') or die('No direct script access.'); //-- Environment setup -------------------------------------------------------- /** * Set the default time zone. * * @see http://kohanaframework.org/guide/using.configuration * @see http://php.net/timezones */ date_default_timezone_set('America/Chicago'); /** * Set the default locale. * * @see http://kohanaframework.org/guide/using.configuration * @see http://php.net/setlocale */ setlocale(LC_ALL, 'en_US.utf-8'); /** * Enable the Kohana auto-loader. * * @see http://kohanaframework.org/guide/using.autoloading * @see http://php.net/spl_autoload_register */ spl_autoload_register(array('Kohana', 'auto_load')); /** * Enable the Kohana auto-loader for unserialization. * * @see http://php.net/spl_autoload_call * @see http://php.net/manual/var.configuration.php#unserialize-callback-func */ ini_set('unserialize_callback_func', 'spl_autoload_call'); //-- Configuration and initialization ----------------------------------------- /** * Initialize Kohana, setting the default options. * * The following options are available: * * - string base_url path, and optionally domain, of your application NULL * - string index_file name of your index file, usually "index.php" index.php * - string charset internal character set used for input and output utf-8 * - string cache_dir set the internal cache directory APPPATH/cache * - boolean errors enable or disable error handling TRUE * - boolean profile enable or disable internal profiling TRUE * - boolean caching enable or disable internal caching FALSE */ Kohana::init(array( 'base_url' => '/mysite/', 'index_file' => FALSE, )); /** * Attach the file write to logging. Multiple writers are supported. */ Kohana::$log->attach(new Kohana_Log_File(APPPATH.'logs')); /** * Attach a file reader to config. Multiple readers are supported. */ Kohana::$config->attach(new Kohana_Config_File); /** * Enable modules. Modules are referenced by a relative or absolute path. */ Kohana::modules(array( 'auth' => MODPATH.'auth', // Basic authentication 'cache' => MODPATH.'cache', // Caching with multiple backends 'codebench' => MODPATH.'codebench', // Benchmarking tool 'database' => MODPATH.'database', // Database access 'image' => MODPATH.'image', // Image manipulation 'orm' => MODPATH.'orm', // Object Relationship Mapping 'pagination' => MODPATH.'pagination', // Paging of results 'userguide' => MODPATH.'userguide', // User guide and API documentation )); /** * Set the routes. Each route must have a minimum of a name, a URI and a set of * defaults for the URI. */ Route::set('default', '(<controller>(/<action>(/<id>)))') ->defaults(array( 'controller' => 'welcome', 'action' => 'index', )); /** * Execute the main request. A source of the URI can be passed, eg: $_SERVER['PATH_INFO']. * If no source is specified, the URI will be automatically detected. */ echo Request::instance() ->execute() ->send_headers() ->response; ?> .htaccess: RewriteEngine On RewriteBase /mysite/ RewriteRule ^(application|modules|system) - [F,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* index.php/$0 [PT,L] Trying to go to http://localhost/ makes the "hello world" page, from the welcome.php Trying to go to http://localhost/mysite/user give me this: The requested URL /mysite/user was not found on this server.

  Read the article

• Opening Skype, Opera, OpenOffice logs me off

  - by anjanesh

  Whats common among Skype, Opera, OpenOffice in Ubuntu ? Whenever I open these applications I get logged off and shows back me the login screen. This started happening since the 10.10 upgrade. Forgot to mention : Yes, its x64.Each time I open these applications, the UI shows and then crashes. I started each app & logged the last few lines of /var/log/syslog after each crash. Looks like something to do with sound drivers ? Opera :Jan 8 09:33:20 al-ubuntu pulseaudio[11532]: pid.c: Daemon already running. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: snd_pcm_dump(): Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Soft volume PCM Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: min_dB: -51 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: max_dB: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: resolution: 256 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Its setup is: Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stream : CAPTURE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: format : S16_LE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: subformat : STD Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: channels : 2 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: rate : 44100 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: msbits : 16 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: buffer_size : 88192 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_size : 44096 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_time : 999909 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_step : 1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: avail_min : 87310 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_event : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: start_threshold : -1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_threshold: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_size : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: Its setup is: Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stream : CAPTURE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: format : S16_LE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: subformat : STD Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: channels : 2 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: rate : 44100 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: msbits : 16 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: buffer_size : 88192 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_size : 44096 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_time : 999909 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_step : 1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: avail_min : 87310 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: period_event : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: start_threshold : -1 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_threshold: 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: silence_size : 0 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: appl_ptr : 87320 Jan 8 09:33:21 al-ubuntu pulseaudio[11429]: alsa-util.c: hw_ptr : 87320 Jan 8 09:33:22 al-ubuntu kernel: [ 4962.078306] opera[11036]: segfault at 261 ip 0000000000000261 sp 00007fffed7cd9a8 error 14 in opera[400000+122b000] anjanesh@al-ubuntu:~$ SkypeJan 8 09:40:21 al-ubuntu pulseaudio[12602]: pid.c: Daemon already running. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: snd_pcm_dump(): Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Soft volume PCM Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: min_dB: -51 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: max_dB: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: resolution: 256 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Its setup is: Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stream : CAPTURE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: format : S16_LE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: subformat : STD Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: channels : 2 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: rate : 44100 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: msbits : 16 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: buffer_size : 88192 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_size : 44096 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_time : 999909 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_step : 1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: avail_min : 87310 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_event : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: start_threshold : -1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_threshold: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_size : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: Its setup is: Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stream : CAPTURE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: format : S16_LE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: subformat : STD Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: channels : 2 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: rate : 44100 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: msbits : 16 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: buffer_size : 88192 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_size : 44096 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_time : 999909 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_step : 1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: avail_min : 87310 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: period_event : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: start_threshold : -1 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_threshold: 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: silence_size : 0 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: appl_ptr : 87312 Jan 8 09:40:23 al-ubuntu pulseaudio[12485]: alsa-util.c: hw_ptr : 87312 anjanesh@al-ubuntu:~$ Open OfficeJan 8 09:43:46 al-ubuntu pulseaudio[13157]: pid.c: Daemon already running. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 16. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: snd_pcm_dump(): Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Soft volume PCM Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Control: PCM Playback Volume Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: min_dB: -51 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: max_dB: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: resolution: 256 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Its setup is: Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stream : CAPTURE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: format : S16_LE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: subformat : STD Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: channels : 2 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: rate : 44100 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: msbits : 16 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: buffer_size : 88192 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_size : 44096 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_time : 999909 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_step : 1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: avail_min : 87310 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_event : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: start_threshold : -1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_threshold: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_size : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: Its setup is: Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stream : CAPTURE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: access : MMAP_INTERLEAVED Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: format : S16_LE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: subformat : STD Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: channels : 2 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: rate : 44100 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: exact rate : 44100 (44100/1) Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: msbits : 16 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: buffer_size : 88192 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_size : 44096 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_time : 999909 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: tstamp_mode : ENABLE Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_step : 1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: avail_min : 87310 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: period_event : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: start_threshold : -1 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: stop_threshold : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_threshold: 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: silence_size : 0 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: boundary : 6205960286516543488 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: appl_ptr : 87320 Jan 8 09:43:48 al-ubuntu pulseaudio[13064]: alsa-util.c: hw_ptr : 87320 anjanesh@al-ubuntu:~$

  Read the article

• Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

  - by ScottGu

  This is the twenty-third in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers some of the extensibility improvements made in VS 2010 – as well as a cool new "PowerCommands for Visual Studio 2010” extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010 provides a much richer extensibility model than previous releases.  Anyone can build extensions that add, customize, and light-up the Visual Studio 2010 IDE, Code Editors, Project System and associated Designers. VS 2010 Extensions can be created using the new MEF (Managed Extensibility Framework) which is built-into .NET 4.  You can learn more about how to create VS 2010 extensions from this this blog post from the Visual Studio Team Blog. VS 2010 Extension Manager Developers building extensions can distribute them on their own (via their own web-sites or by selling them).  Visual Studio 2010 also now includes a built-in “Extension Manager” within the IDE that makes it much easier for developers to find, download, and enable extensions online.  You can launch the “Extension Manager” by selecting the Tools->Extension Manager menu option: This loads an “Extension Manager” dialog which accesses an “online gallery” at Microsoft, and then populates a list of available extensions that you can optionally download and enable within your copy of Visual Studio: There are already hundreds of cool extensions populated within the online gallery.  You can browse them by category (use the tree-view on the top-left to filter them).  Clicking “download” on any of the extensions will download, install, and enable it. PowerCommands for Visual Studio 2010 This weekend Microsoft released the free PowerCommands for Visual Studio 2010 extension to the online gallery.  You can learn more about it here, and download and install it via the “Extension Manager” above (search for PowerCommands to find it). The PowerCommands download adds dozens of useful commands to Visual Studio 2010.  Below is a screen-shot of just a few of the useful commands that it adds to the Solution Explorer context menus: Below is a list of all the commands included with this weekend’s PowerCommands for Visual Studio 2010 release: Enable/Disable PowerCommands in Options dialog This feature allows you to select which commands to enable in the Visual Studio IDE. Point to the Tools menu, then click Options. Expand the PowerCommands options, then click Commands. Check the commands you would like to enable. Note: All power commands are initially defaulted Enabled. Format document on save / Remove and Sort Usings on save The Format document on save option formats the tabs, spaces, and so on of the document being saved. It is equivalent to pointing to the Edit menu, clicking Advanced, and then clicking Format Document. The Remove and sort usings option removes unused using statements and sorts the remaining using statements in the document being saved. Note: The Remove and sort usings option is only available for C# documents. Format document on save and Remove and sort usings both are initially defaulted OFF. Clear All Panes This command clears all output panes. It can be executed from the button on the toolbar of the Output window. Copy Path This command copies the full path of the currently selected item to the clipboard. It can be executed by right-clicking one of these nodes in the Solution Explorer: The solution node; A project node; Any project item node; Any folder. Email CodeSnippet To email the lines of text you select in the code editor, right-click anywhere in the editor and then click Email CodeSnippet. Insert Guid Attribute This command adds a Guid attribute to a selected class. From the code editor, right-click anywhere within the class definition, then click Insert Guid Attribute. Show All Files This command shows the hidden files in all projects displayed in the Solution Explorer when the solution node is selected. It enhances the Show All Files button, which normally shows only the hidden files in the selected project node. Undo Close This command reopens a closed document , returning the cursor to its last position. To reopen the most recently closed document, point to the Edit menu, then click Undo Close. Alternately, you can use the CtrlShiftZ shortcut. To reopen any other recently closed document, point to the View menu, click Other Windows, and then click Undo Close Window. The Undo Close window appears, typically next to the Output window. Double-click any document in the list to reopen it. Collapse Projects This command collapses a project or projects in the Solution Explorer starting from the root selected node. Collapsing a project can increase the readability of the solution. This command can be executed from three different places: solution, solution folders and project nodes respectively. Copy Class This command copies a selected class entire content to the clipboard, renaming the class. This command is normally followed by a Paste Class command, which renames the class to avoid a compilation error. It can be executed from a single project item or a project item with dependent sub items. Paste Class This command pastes a class entire content from the clipboard, renaming the class to avoid a compilation error. This command is normally preceded by a Copy Class command. It can be executed from a project or folder node. Copy References This command copies a reference or set of references to the clipboard. It can be executed from the references node, a single reference node or set of reference nodes. Paste References This command pastes a reference or set of references from the clipboard. It can be executed from different places depending on the type of project. For CSharp projects it can be executed from the references node. For Visual Basic and Website projects it can be executed from the project node. Copy As Project Reference This command copies a project as a project reference to the clipboard. It can be executed from a project node. Edit Project File This command opens the MSBuild project file for a selected project inside Visual Studio. It combines the existing Unload Project and Edit Project commands. Open Containing Folder This command opens a Windows Explorer window pointing to the physical path of a selected item. It can be executed from a project item node Open Command Prompt This command opens a Visual Studio command prompt pointing to the physical path of a selected item. It can be executed from four different places: solution, project, folder and project item nodes respectively. Unload Projects This command unloads all projects in a solution. This can be useful in MSBuild scenarios when multiple projects are being edited. This command can be executed from the solution node. Reload Projects This command reloads all unloaded projects in a solution. It can be executed from the solution node. Remove and Sort Usings This command removes and sort using statements for all classes given a project. It is useful, for example, in removing or organizing the using statements generated by a wizard. This command can be executed from a solution node or a single project node. Extract Constant This command creates a constant definition statement for a selected text. Extracting a constant effectively names a literal value, which can improve readability. This command can be executed from the code editor by right-clicking selected text. Clear Recent File List This command clears the Visual Studio recent file list. The Clear Recent File List command brings up a Clear File dialog which allows any or all recent files to be selected. Clear Recent Project List This command clears the Visual Studio recent project list. The Clear Recent Project List command brings up a Clear File dialog which allows any or all recent projects to be selected. Transform Templates This command executes a custom tool with associated text templates items. It can be executed from a DSL project node or a DSL folder node. Close All This command closes all documents. It can be executed from a document tab. How to temporarily disable extensions Extensions provide a great way to make Visual Studio even more powerful, and can help improve your overall productivity.  One thing to keep in mind, though, is that extensions run within the Visual Studio process (DevEnv.exe) and so a bug within an extension can impact both the stability and performance of Visual Studio.  If you ever run into a situation where things seem slower than they should, or if you crash repeatedly, please temporarily disable any installed extensions and see if that fixes the problem.  You can do this for extensions that were installed via the online gallery by re-running the extension manager (using the Tools->Extension Manager menu option) and by selecting the “Installed Extensions” node on the top-left of the dialog – and then by clicking “Disable” on any of the extensions within your installed list: Hope this helps, Scott

  Read the article

• Sudo and startup script

  - by Pitto

  Hello my friends. I have a new asus 1215n and I need to digit commands to enable multitouch. No problem: I've made a script. Since this netbook also need manual activation of the wifi driver the complete script is: #!/bin/bash # # list of synaptics device properties http://www.x.org/archive/X11R7.5/doc/man/man4/synaptics.4.html#sect4 # list current synaptics device properties: xinput list-props '"SynPS/2 Synaptics TouchPad"' # sleep 5 #added delay... xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 4 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 9 # Below width 1 finger touch, above width simulate 2 finger touch. - value=pad-pixels xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Edge Scrolling" 1 1 0 # vertical, horizontal, corner - values: 0=disable 1=enable xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Jumpy Cursor Threshold" 250 # stabilize 2 finger actions - value=pad-pixels #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Tap Action" 0 0 0 0 1 2 3 # pad corners rt rb lt lb tap fingers 1 2 3 (can't simulate more then 2 tap fingers AFAIK) - values: 0=disable 1=left 2=middle 3=right etc. (in FF 8=back 9=forward) xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 1 0 # vertical scrolling, horizontal scrolling - values: 0=disable 1=enable #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling" 1 #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling Trigger" 3 sudo modprobe lib80211 sudo insmod /home/pitto/Drivers/broadcom/wl.ko exit I've saved the script, then put it in my home, then chmod +x scriptname and then added it to startup applications. Then I did: sudo visudo and added this row: myusername ALL=(ALL) NOPASSWD: /home/scriptname rebooted and... Multitouch works but wifi not. When I manually launch the script it asks for sudo password so I thought it was because of modprobe and insmod commands and I've added those commands to sudo visudo. Nothing. What am I doing wrong?

  Read the article

• how this scaling down for css code is worked?

  - by harris

  this is a code for scaling down for css. i was wondering, how this worked. please someone explain to me part by part. thank you very much. /* ======================================================================== / / Copyright (C) 2000 - 2009 ND-Tech. Co., Ltd. / / All Rights Reserved. / / ======================================================================== / / Project : ScaleDown Created : 31-AUG-2009 / / File : main.c Contact : [email protected] / / ======================================================================== / / You are free to use or modify this code to the following restrictions: / / Acknowledge ND Tech. Co. Ltd. / / Or, put "Parts of code by ND Tech. Co., Ltd." / / Or, leave this header as it is. / / in somewhere in your code. / / ======================================================================== */ include "vm3224k.h" define CE0CTL *(volatile int *)(0x01800008) define CE2CTL *(volatile int *)(0x01800010) define SDCTL *(volatile int *)(0x01800018) define LED *(volatile short *)(0x90080000) // Definitions for async access(change as you wish) define WSU (2<<28) // Write Setup : 0-15 define WST (8<<22) // Write Strobe: 0-63 define WHD (2<<20) // Write Hold : 0-3 define RSU (2<<16) // Read Setup : 0-15 define TA (3<<14) // Turn Around : 0-3 define RST (8<<8) // Read Strobe : 0-63 define RHD (2<<0) // Read Hold : 0-3 define MTYPE (2<<4) /* EDMA Registers */ define PaRAM_OPT 0 // Options define PaRAM_SRC 1 // Source Address define PaRAM_CNT 2 // Frame count, Element count define PaRAM_DST 3 // Destination Address define PaRAM_IDX 4 // Frame index, Element index define PaRAM_RDL 5 // Element count reload, Link address define EDMA_CIPR *(volatile int *)0x01A0FFE4 // EDMA Channel interrupt pending low register define EDMA_CIER *(volatile int *)0x01A0FFE8 // EDMA Channel interrupt enable low register define EDMA_CCER *(volatile int *)0x01A0FFEC // EDMA Channel chain enable register define EDMA_ER *(volatile int *)0x01A0FFF0 // EDMA Event low register define EDMA_EER *(volatile int *)0x01A0FFF4 // EDMA Event enable low register define EDMA_ECR *(volatile int *)0x01A0FFF8 // EDMA Event clear low register define EDMA_ESR *(volatile int *)0x01A0FFFC // EDMA Event set low register define PRI (2<<29) // 1:High priority, 2:Low priority define ESIZE (1<<27) // 0:32bit, 1:16bit, 2:8bit, 3:reserved define DS2 (0<<26) // 1:2-Dimensional define SUM (0<<24) // 0:no update, 1:increment, 2:decrement, 3:by index define DD2 (0<<23) // 1:2-Dimensional define DUM (0<<21) // 0:no update, 1:increment, 2:decrement, 3:by index define TCINT (1<<20) // 0:disable, 1:enable define TCC (8<<16) // 4 bit code define LINK (0<<1) // 0:disable, 1:enable define FS (1<<0) // 0:element, 1:frame define OptionField_0 (PRI|ESIZE|DS2|SUM|DD2|DUM|TCINT|TCC|LINK|FS) define DD2_1 (1<<23) // 1:2-Dimensional define DUM_1 (1<<21) // 0:no update, 1:increment, 2:decrement, 3:by index define TCC_1 (9<<16) // 4 bit code define OptionField_1 (PRI|ESIZE|DS2|SUM|DD2_1|DUM_1|TCINT|TCC_1|LINK|FS) define TCC_2 (10<<16)// 4 bit code define OptionField_2 (PRI|ESIZE|DS2|SUM|DD2|DUM|TCINT|TCC_2|LINK|FS) define DS2_3 (1<<26) // 1:2-Dimensional define SUM_3 (1<<24) // 0:no update, 1:increment, 2:decrement, 3:by index define TCC_3 (11<<16)// 4 bit code define OptionField_3 (PRI|ESIZE|DS2_3|SUM_3|DD2|DUM|TCINT|TCC_3|LINK|FS) pragma DATA_SECTION ( lcd,".sdram" ) pragma DATA_SECTION ( cam,".sdram" ) pragma DATA_SECTION ( rgb,".sdram" ) pragma DATA_SECTION ( u,".sdram" ) extern cregister volatile unsigned int IER; extern cregister volatile unsigned int CSR; short camcode = 0x08000; short lcdcode = 0x00000; short lcd[2][240][320]; short cam[2][240][320]; short rgb[64][32][32]; short bufsel; int *Cevent,*Levent,*CLink,flag=1; unsigned char v[240][160],out_y[120][160]; unsigned char y[240][320],out_u[120][80]; unsigned char u[240][160],out_v[120][80]; void PLL6713() { int i; // CPU Clock Input : 50MHz *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) & 0xfffffffe; for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) | 0x08; *(volatile int *)(0x01b7c114) = 0x08001; // 50MHz/2 = 25MHz *(volatile int *)(0x01b7c110) = 0x0c; // 25MHz * 12 = 300MHz *(volatile int *)(0x01b7c118) = 0x08000; // SYSCLK1 = 300MHz/1 = 300MHz *(volatile int *)(0x01b7c11c) = 0x08001; // SYSCLK2 = 300MHz/2 = 150MHz // Peripheral Clock *(volatile int *)(0x01b7c120) = 0x08003; // SYSCLK3 = 300MHz/4 = 75MHz // SDRAM Clock for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) & 0xfffffff7; for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) | 0x01; } unsigned short ybr_565(short y,short u,short v) { int r,g,b; b = y + 1772*(u-128)/1000; if (b<0) b=0; if (b>255) b=255; g = y - (344*(u-128) + 714*(v-128))/1000; if (g<0) g=0; if (g>255) g=255; r = y + 1402*(v-128)/1000; if (r<0) r=0; if (r>255) r=255; return ((r&0x0f8)<<8)|((g&0x0fc)<<3)|((b&0x0f8)>>3); } void yuyv2yuv(char *yuyv,char *y,char *u,char *v) { int i,j,dy,dy1,dy2,s; for (j=s=dy=dy1=dy2=0;j<240;j++) { for (i=0;i<320;i+=2) { u[dy1++] = yuyv[s++]; y[dy++] = yuyv[s++]; v[dy2++] = yuyv[s++]; y[dy++] = yuyv[s++]; } } } interrupt void c_int06(void) { if(EDMA_CIPR&0x800){ EDMA_CIPR = 0xffff; bufsel=(++bufsel&0x01); Cevent[PaRAM_DST] = (int)cam[(bufsel+1)&0x01]; Levent[PaRAM_SRC] = (int)lcd[(bufsel+1)&0x01]; EDMA_ESR = 0x80; flag=1; } } void main() { int i,j,k,y0,y1,v0,u0; bufsel = 0; CSR &= (~0x1); PLL6713(); // Initialize C6713 PLL CE0CTL = 0xffffbf33;// SDRAM Space CE2CTL = (WSU|WST|WHD|RSU|RST|RHD|MTYPE); SDCTL = 0x57115000; vm3224init(); // Initialize vm3224k2 vm3224rate(1); // Set frame rate vm3224bl(15); // Set backlight VM3224CNTL = VM3224CNTL&0xffff | 0x2; // vm3224 interrupt enable for (k=0;k<64;k++) // Create RGB565 lookup table for (i=0;i<32;i++) for (j=0;j<32;j++) rgb[k][i][j] = ybr_565(k<<2,i<<3,j<<3); Cevent = (int *)(0x01a00000 + 24 * 7); Cevent[PaRAM_OPT] = OptionField_0; Cevent[PaRAM_SRC] = (int)&camcode; Cevent[PaRAM_CNT] = 1; Cevent[PaRAM_DST] = (int)&VM3224ADDH; Cevent = (int *)(0x01a00000 + 24 * 8); Cevent[PaRAM_OPT] = OptionField_1; Cevent[PaRAM_SRC] = (int)&VM3224DATA; Cevent[PaRAM_CNT] = (239<<16)|320; Cevent[PaRAM_DST] = (int)cam[bufsel]; Cevent[PaRAM_IDX] = 0; Levent = (int *)(0x01a00000 + 24 * 9); Levent[PaRAM_OPT] = OptionField_2; Levent[PaRAM_SRC] = (int)&lcdcode; Levent[PaRAM_CNT] = 1; Levent[PaRAM_DST] = (int)&VM3224ADDH; Levent = (int *)(0x01a00000 + 24 * 10); Levent[PaRAM_OPT] = OptionField_3; Levent[PaRAM_SRC] = (int)lcd[bufsel]; Levent[PaRAM_CNT] = (239<<16)|320; Levent[PaRAM_DST] = (int)&VM3224DATA; Levent[PaRAM_IDX] = 0; IER = IER | (1<<6)|3; CSR = CSR | 0x1; EDMA_CCER = (1<<8)|(1<<9)|(1<<10); EDMA_CIER = (1<<11); EDMA_CIPR = 0xffff; EDMA_ESR = 0x80; while (1) { if(flag) { // LED = 0; yuyv2yuv((char *)cam[bufsel],(char *)y,(char *)u,(char *)v); for(j=0;j<240;j++) for(i=0;i<320;i++) lcd[bufsel][j][i]=0; for(j=0;j<240;j+=2) for(i=0;i<320;i+=2) out_y[j>>1][i>>1]=(y[j][i]+y[j][i+1]+y[j+1][i]+y[j+1][i+1])>>2; for(j=0;j<240;j+=2) for(i=0;i<160;i+=2) { out_u[j>>1][i>>1]=(u[j][i]+u[j][i+1]+u[j+1][i]+u[j+1][i+1])>>2; out_v[j>>1][i>>1]=(v[j][i]+v[j][i+1]+v[j+1][i]+v[j+1][i+1])>>2; } for (j=0;j<120;j++) for (i=0;i<160;i+=2) { y0 = out_y[j][i]>>2; u0 = out_u[j][i>>1]>>3; v0 = out_v[j][i>>1]>>3; y1 = out_y[j][i+1]>>2; lcd[bufsel][j+60][i+80]=rgb[y0][u0][v0]; lcd[bufsel][j+60][i+81]=rgb[y1][u0][v0]; } flag=0; // LED = 1; } } }

  Read the article

• Microsoft Sync Framework

  - by kaleidoscope

  Introduction It is a platform that enables collaboration and offline access for applications, services and devices. Sync framework features technologies and tools that enable roaming, data sharing and taking data offline. Moreover, developers can build synchronization ecosystems that integrate any application with data from any store, by using any protocol over any network. Highlights * Add sync support to new and existing applications, services and devices * Enable collaboration and offline capabilities for any application * Roam and share information form any data store, over any protocol and over any network configuration * Leverage sync capabilities exposed in Microsoft technologies to create sync ecosystems * Extend the architecture to support custom data types including files Benefits of using Sync Framework * An extensible model that lets you integrate multiple data sources into a synchronization ecosystems. * A managed API for all components and a native API for select components. * Conflict handling for automatic and custom resolution schemes. * Filters that let you synchronize a subset of data, such as only those files that contain images. * A compact and efficient metadata model that enables synchronization for virtually any participant, without significant changes to the data store: - Any data store     Add synchronization to a wide range of applications, services and devices. - Any data type     Introduce new data types to synchronize. - Any protocol     Use existing architectures and protocols to synchronize data. The transport – agnostic architecture allows integration of synchronization into a variety of protocols, including over-the-air and embedded devices. - Any network configuration     Enable synchronization for your applications, devices and services in true peer-to-peer or hub-and-spoke configurations. Easily recover from network interruptions. Reduce network traffic by efficiently selecting changes to synchronize. Technorati Tags: Anish Sharma,Microsoft Sync Framework

  Read the article

• Style bits vs. Separate bool's

  - by peterchen

  My main platform (WinAPI) still heavily uses bits for control styles etc. (example). When introducing custom controls, I'm permanently wondering whether to follow that style or rather use individual bool's. Let's pit them against each other: enum EMyCtrlStyles { mcsUseFileIcon = 1, mcsTruncateFileName = 2, mcsUseShellContextMenu = 4, }; void SetStyle(DWORD mcsStyle); void ModifyStyle(DWORD mcsRemove, DWORD mcsAdd); DWORD GetStyle() const; ... ctrl.SetStyle(mcsUseFileIcon | mcsUseShellContextMenu); vs. CMyCtrl & SetUseFileIcon(bool enable = true); bool GetUseFileIcon() const; CMyCtrl & SetTruncteFileName(bool enable = true); bool GetTruncteFileName() const; CMyCtrl & SetUseShellContextMenu(bool enable = true); bool GetUseShellContextMenu() const; ctrl.SetUseFileIcon().SetUseShellContextMenu(); As I see it, Pro Style Bits Consistent with platform less library code (without gaining complexity), less places to modify for adding a new style less caller code (without losing notable readability) easier to use in some scenarios (e.g. remembering / transferring settings) Binary API remains stable if new style bits are introduced Now, the first and the last are minor in most cases. Pro Individual booleans Intellisense and refactoring tools reduce the "less typing" effort Single Purpose Entities more literate code (as in "flows more like a sentence") No change of paradim for non-bool properties These sound more modern, but also "soft" advantages. I must admit the "platform consistency" is much more enticing than I could justify, the less code without losing much quality is a nice bonus. 1. What do you prefer? Subjectively, for writing the library, or for writing client code? 2. Any (semi-) objective statements, studies, etc.?

  Read the article

• Apache2 + Php + Pthreads HowTos

  - by Drug

  04 LTS 64 bit. What I would really love to do is sudo apt-get install libapache2-mod-php5 but compile PHP with --enable-maintainer-zts so I could later install pthreads with pecl install pthreads. Sadly I understand that it is not possible. I know that the easiest way is to recompile PHP together with apache support and zts. However I really like the way the standard Ubuntu PHP package is configured and I am used to the path`s for CLI php.ini config, Apache php.ini config and other paths for modules and files that this Ubuntu package defines. So i just want to change the package source a little bit and install it. # Get the stuff necessary to build the package sudo apt-get build-dep php5-common # Get the package source sudo apt-get source php5-common At this point I am getting sources not for the php5-common package but the whole php5 package. If I would sudo make && make install at this point, would it mean that I am installing a lot of unnecessary stuff? # Add configuration options ./configure --enable-maintainer-zts Does this mean that I am appending a configuration option? Or am I generating a whole new config? Alternative at this point Is there a way of getting the config options that this package defines, so that I can grab a php source from php.net and compile it with $ ./configure --prefix=package_prefix \ // Option 1 from package --enable-embed \ // Option 2 from package --with-regex=php \ // Option 3 from package Continuing the main idea ... Solution 1 # Compile (Not compiling) sudo make && make install Will I be building PHP with EVERYTHING at this point? If I compile like this, I will not be able to remove the mess I made using sudo apt-get purge php5? Solution 2 # ReCompile the package dpkg-buildpackage -rfakeroot -uc -b This does not compile also. Please correct my steps, so I can install everything correctly.

  Read the article

• Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

  - by user180782

  Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

  Read the article

• OVM Server for SPARC Enhancements

  - by Owen Allen

  Oracle VM Servers for SPARC saw a few improvements in Ops Center 12.2. In addition to brownfield support, we've made a number of enhancements to let you add OVM Servers for SPARC to a Server Pool and enable migration of their guests. -When you discover an OVMSS Control Domain and manage it with an Ops Center Agent, its guests are automatically discovered as well. The guest metadata is initially put in the local metadata library in the /guests directory, but you can move it from one library to another to enable migration.-Once you've discovered an OVMSS control domain, you can add it to a server pool, even if it's already configured and running logical domains. Even if live migration between OVMSS systems isn't possible due to CPU incompatibilities, you can still put them in a server pool together and enable guest recovery by configuring the CPU architecture of the guest domain as generic. -You can mark a guest's storage as shared to indicate that it's available to other managed OVM Server systems with the same back-end name. This lets you use storage not fully managed in an Ops Center library as part of guest migration. Put together, these enhancements make it much easier to manage and maintain OVMSS guests.

  Read the article

• JMX Monitoring of GlassFish Servers

  - by tjquinn

  Did you ever wonder what this message in your GlassFish server.log file means? JMXStartupService has started JMXConnector on JMXService URL service:jmx:rmi://192.168.2.102:8686/jndi/rmi://192.168.2.102:8686/jmxrmi It means you can monitor any GlassFish server process, remotely or locally, using any standard Java Management Extensions (JMX) client.  Examples: jconsole or jvisualvm.   Copy the part of the log message that starts with "service:" into the Add JMX Connection dialog of jvisualvm:  or into the New Connection dialog of jconsole: (The full string is truncated in the on-screen display, but if you copied from the server.log and pasted into the form it should all be there.) The examples above are for a DAS, and your host will probably be different.   The server.log files for other GlassFish servers (instances) will have similar log entries giving the JMX connection string to use for those processes.  Look for the host and/or port to be different. Note a few things about security: Here we've assumed you are using the default admin username and password.  If you are not, just enter a valid admin username and password for your installation.  Once connected, you have normal access to all the JVM statistics and controls. You can use JMX clients that support MBeans to view the GlassFish configuration.  When you connect to the DAS, you can also change that configuration, but you can only view configuration when you connect to an instance. To use a JMX client on one system to connect to a GlassFish server running on another system, you need to enable secure admin if you have not already done so: asadmin change-admin-password (respond to the prompts) asadmin enable-secure-admin asadmin restart-domain (as prompted in the output from enable-secure-admin)

  Read the article

• JustCode &ndash; Color Identifier Basics

  Color identifiers make it easier for developers to quickly read and understand the code on screen.  One of the many features provided by JustCode is the ability to colorize additional items that Visual Studio does not allow you to colorize by default.  The colorization of items such as methods, properties, events, variables, and method parameters can easily be tweaked to your specific needs. Enable / Disable Color Identifiers In the recent release, we turned this option on by default.  You can enable/disable code colorization by going to the JustCode menu in Visual Studio, selecting options, then selecting the general section in the left window.  When you scroll down on general setting you will see a check box that says Color Identifiers.  Check or uncheck this box to enable/disable code colorization.    Color identifiers option   Adjust Color Identifiers Adjusting the color identifiers in JustCode is done in the same place ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Meet the New Windows Azure

  - by ScottGu

  Today we are releasing a major set of improvements to Windows Azure.  Below is a short-summary of just a few of them: New Admin Portal and Command Line Tools Today’s release comes with a new Windows Azure portal that will enable you to manage all features and services offered on Windows Azure in a seamless, integrated way.  It is very fast and fluid, supports filtering and sorting (making it much easier to use for large deployments), works on all browsers, and offers a lot of great new features – including built-in VM, Web site, Storage, and Cloud Service monitoring support. The new portal is built on top of a REST-based management API within Windows Azure – and everything you can do through the portal can also be programmed directly against this Web API. We are also today releasing command-line tools (which like the portal call the REST Management APIs) to make it even easier to script and automate your administration tasks.  We are offering both a Powershell (for Windows) and Bash (for Mac and Linux) set of tools to download.  Like our SDKs, the code for these tools is hosted on GitHub under an Apache 2 license. Virtual Machines Windows Azure now supports the ability to deploy and run durable VMs in the cloud.  You can easily create these VMs using a new Image Gallery built-into the new Windows Azure Portal, or alternatively upload and run your own custom-built VHD images. Virtual Machines are durable (meaning anything you install within them persists across reboots) and you can use any OS with them.  Our built-in image gallery includes both Windows Server images (including the new Windows Server 2012 RC) as well as Linux images (including Ubuntu, CentOS, and SUSE distributions).  Once you create a VM instance you can easily Terminal Server or SSH into it in order to configure and customize the VM however you want (and optionally capture your own image snapshot of it to use when creating new VM instances).  This provides you with the flexibility to run pretty much any workload within Windows Azure.   The new Windows Azure Portal provides a rich set of management features for Virtual Machines – including the ability to monitor and track resource utilization within them.  Our new Virtual Machine support also enables the ability to easily attach multiple data-disks to VMs (which you can then mount and format as drives).  You can optionally enable geo-replication support on these – which will cause Windows Azure to continuously replicate your storage to a secondary data-center at least 400 miles away from your primary data-center as a backup. We use the same VHD format that is supported with Windows virtualization today (and which we’ve released as an open spec), which enables you to easily migrate existing workloads you might already have virtualized into Windows Azure.  We also make it easy to download VHDs from Windows Azure, which also provides the flexibility to easily migrate cloud-based VM workloads to an on-premise environment.  All you need to do is download the VHD file and boot it up locally, no import/export steps required. Web Sites Windows Azure now supports the ability to quickly and easily deploy ASP.NET, Node.js and PHP web-sites to a highly scalable cloud environment that allows you to start small (and for free) and then scale up as your traffic grows.  You can create a new web site in Azure and have it ready to deploy to in under 10 seconds: The new Windows Azure Portal provides built-in administration support for Web sites – including the ability to monitor and track resource utilization in real-time: You can deploy to web-sites in seconds using FTP, Git, TFS and Web Deploy.  We are also releasing tooling updates today for both Visual Studio and Web Matrix that enable developers to seamlessly deploy ASP.NET applications to this new offering.  The VS and Web Matrix publishing support includes the ability to deploy SQL databases as part of web site deployment – as well as the ability to incrementally update database schema with a later deployment. You can integrate web application publishing with source control by selecting the “Set up TFS publishing” or “Set up Git publishing” links on a web-site’s dashboard: Doing do will enable integration with our new TFS online service (which enables a full TFS workflow – including elastic build and testing support), or create a Git repository that you can reference as a remote and push deployments to.  Once you push a deployment using TFS or Git, the deployments tab will keep track of the deployments you make, and enable you to select an older (or newer) deployment and quickly redeploy your site to that snapshot of the code.  This provides a very powerful DevOps workflow experience.   Windows Azure now allows you to deploy up to 10 web-sites into a free, shared/multi-tenant hosting environment (where a site you deploy will be one of multiple sites running on a shared set of server resources).  This provides an easy way to get started on projects at no cost. You can then optionally upgrade your sites to run in a “reserved mode” that isolates them so that you are the only customer within a virtual machine: And you can elastically scale the amount of resources your sites use – allowing you to increase your reserved instance capacity as your traffic scales: Windows Azure automatically handles load balancing traffic across VM instances, and you get the same, super fast, deployment options (FTP, Git, TFS and Web Deploy) regardless of how many reserved instances you use. With Windows Azure you pay for compute capacity on a per-hour basis – which allows you to scale up and down your resources to match only what you need. Cloud Services and Distributed Caching Windows Azure also supports the ability to build cloud services that support rich multi-tier architectures, automated application management, and scale to extremely large deployments.  Previously we referred to this capability as “hosted services” – with this week’s release we are now referring to this capability as “cloud services”.  We are also enabling a bunch of new features with them. Distributed Cache One of the really cool new features being enabled with cloud services is a new distributed cache capability that enables you to use and setup a low-latency, in-memory distributed cache within your applications.  This cache is isolated for use just by your applications, and does not have any throttling limits. This cache can dynamically grow and shrink elastically (without you have to redeploy your app or make code changes), and supports the full richness of the AppFabric Cache Server API (including regions, high availability, notifications, local cache and more).  In addition to supporting the AppFabric Cache Server API, it also now supports the Memcached protocol – allowing you to point code written against Memcached at it (no code changes required). The new distributed cache can be setup to run in one of two ways: 1) Using a co-located approach.  In this option you allocate a percentage of memory in your existing web and worker roles to be used by the cache, and then the cache joins the memory into one large distributed cache.  Any data put into the cache by one role instance can be accessed by other role instances in your application – regardless of whether the cached data is stored on it or another role.  The big benefit with the “co-located” option is that it is free (you don’t have to pay anything to enable it) and it allows you to use what might have been otherwise unused memory within your application VMs. 2) Alternatively, you can add “cache worker roles” to your cloud service that are used solely for caching.  These will also be joined into one large distributed cache ring that other roles within your application can access.  You can use these roles to cache 10s or 100s of GBs of data in-memory very effectively – and the cache can be elastically increased or decreased at runtime within your application: New SDKs and Tooling Support We have updated all of the Windows Azure SDKs with today’s release to include new features and capabilities.  Our SDKs are now available for multiple languages, and all of the source in them is published under an Apache 2 license and and maintained in GitHub repositories. The .NET SDK for Azure has in particular seen a bunch of great improvements with today’s release, and now includes tooling support for both VS 2010 and the VS 2012 RC. We are also now shipping Windows, Mac and Linux SDK downloads for languages that are offered on all of these systems – allowing developers to develop Windows Azure applications using any development operating system. Much, Much More The above is just a short list of some of the improvements that are shipping in either preview or final form today – there is a LOT more in today’s release.  These include new Virtual Private Networking capabilities, new Service Bus runtime and tooling support, the public preview of the new Azure Media Services, new Data Centers, significantly upgraded network and storage hardware, SQL Reporting Services, new Identity features, support within 40+ new countries and territories, and much, much more. You can learn more about Windows Azure and sign-up to try it for free at http://windowsazure.com.  You can also watch a live keynote I’m giving at 1pm June 7th (later today) where I’ll walk through all of the new features.  We will be opening up the new features I discussed above for public usage a few hours after the keynote concludes.  We are really excited to see the great applications you build with them. Hope this helps, Scott

  Read the article

• Toon shader with Texture. Can this be optimized?

  - by Alex

  I am quite new to OpenGL, I have managed after long trial and error to integrate Nehe's Cel-Shading rendering with my Model loaders, and have them drawn using the Toon shade and outline AND their original texture at the same time. The result is actually a very nice Cel Shading effect of the model texture, but it is havling the speed of the program, it's quite very slow even with just 3 models on screen... Since the result was kind of hacked together, I am thinking that maybe I am performing some extra steps or extra rendering tasks that maybe are not needed, and are slowing down the game? Something unnecessary that maybe you guys could spot? Both MD2 and 3DS loader have an InitToon() function called upon creation to load the shader initToon(){ int i; // Looping Variable ( NEW ) char Line[255]; // Storage For 255 Characters ( NEW ) float shaderData[32][3]; // Storate For The 96 Shader Values ( NEW ) FILE *In = fopen ("Shader.txt", "r"); // Open The Shader File ( NEW ) if (In) // Check To See If The File Opened ( NEW ) { for (i = 0; i < 32; i++) // Loop Though The 32 Greyscale Values ( NEW ) { if (feof (In)) // Check For The End Of The File ( NEW ) break; fgets (Line, 255, In); // Get The Current Line ( NEW ) shaderData[i][0] = shaderData[i][1] = shaderData[i][2] = float(atof (Line)); // Copy Over The Value ( NEW ) } fclose (In); // Close The File ( NEW ) } else return false; // It Went Horribly Horribly Wrong ( NEW ) glGenTextures (1, &shaderTexture[0]); // Get A Free Texture ID ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind This Texture. From Now On It Will Be 1D ( NEW ) // For Crying Out Loud Don't Let OpenGL Use Bi/Trilinear Filtering! ( NEW ) glTexParameteri (GL_TEXTURE_1D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri (GL_TEXTURE_1D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage1D (GL_TEXTURE_1D, 0, GL_RGB, 32, 0, GL_RGB , GL_FLOAT, shaderData); // Upload ( NEW ) } This is the drawing for the animated MD2 model: void MD2Model::drawToon() { float outlineWidth = 3.0f; // Width Of The Lines ( NEW ) float outlineColor[3] = { 0.0f, 0.0f, 0.0f }; // Color Of The Lines ( NEW ) // ORIGINAL PART OF THE FUNCTION //Figure out the two frames between which we are interpolating int frameIndex1 = (int)(time * (endFrame - startFrame + 1)) + startFrame; if (frameIndex1 > endFrame) { frameIndex1 = startFrame; } int frameIndex2; if (frameIndex1 < endFrame) { frameIndex2 = frameIndex1 + 1; } else { frameIndex2 = startFrame; } MD2Frame* frame1 = frames + frameIndex1; MD2Frame* frame2 = frames + frameIndex2; //Figure out the fraction that we are between the two frames float frac = (time - (float)(frameIndex1 - startFrame) / (float)(endFrame - startFrame + 1)) * (endFrame - startFrame + 1); // I ADDED THESE FROM NEHE'S TUTORIAL FOR FIRST PASS (TOON SHADE) glHint (GL_LINE_SMOOTH_HINT, GL_NICEST); // Use The Good Calculations ( NEW ) glEnable (GL_LINE_SMOOTH); // Cel-Shading Code // glEnable (GL_TEXTURE_1D); // Enable 1D Texturing ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind Our Texture ( NEW ) glColor3f (1.0f, 1.0f, 1.0f); // Set The Color Of The Model ( NEW ) // ORIGINAL DRAWING CODE //Draw the model as an interpolation between the two frames glBegin(GL_TRIANGLES); for(int i = 0; i < numTriangles; i++) { MD2Triangle* triangle = triangles + i; for(int j = 0; j < 3; j++) { MD2Vertex* v1 = frame1->vertices + triangle->vertices[j]; MD2Vertex* v2 = frame2->vertices + triangle->vertices[j]; Vec3f pos = v1->pos * (1 - frac) + v2->pos * frac; Vec3f normal = v1->normal * (1 - frac) + v2->normal * frac; if (normal[0] == 0 && normal[1] == 0 && normal[2] == 0) { normal = Vec3f(0, 0, 1); } glNormal3f(normal[0], normal[1], normal[2]); MD2TexCoord* texCoord = texCoords + triangle->texCoords[j]; glTexCoord2f(texCoord->texCoordX, texCoord->texCoordY); glVertex3f(pos[0], pos[1], pos[2]); } } glEnd(); // ADDED THESE FROM NEHE'S FOR SECOND PASS (OUTLINE) glDisable (GL_TEXTURE_1D); // Disable 1D Textures ( NEW ) glEnable (GL_BLEND); // Enable Blending ( NEW ) glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA); // Set The Blend Mode ( NEW ) glPolygonMode (GL_BACK, GL_LINE); // Draw Backfacing Polygons As Wireframes ( NEW ) glLineWidth (outlineWidth); // Set The Line Width ( NEW ) glCullFace (GL_FRONT); // Don't Draw Any Front-Facing Polygons ( NEW ) glDepthFunc (GL_LEQUAL); // Change The Depth Mode ( NEW ) glColor3fv (&outlineColor[0]); // Set The Outline Color ( NEW ) // HERE I AM PARSING THE VERTICES AGAIN (NOT IN THE ORIGINAL FUNCTION) FOR THE OUTLINE AS PER NEHE'S TUT glBegin (GL_TRIANGLES); // Tell OpenGL What We Want To Draw for(int i = 0; i < numTriangles; i++) { MD2Triangle* triangle = triangles + i; for(int j = 0; j < 3; j++) { MD2Vertex* v1 = frame1->vertices + triangle->vertices[j]; MD2Vertex* v2 = frame2->vertices + triangle->vertices[j]; Vec3f pos = v1->pos * (1 - frac) + v2->pos * frac; Vec3f normal = v1->normal * (1 - frac) + v2->normal * frac; if (normal[0] == 0 && normal[1] == 0 && normal[2] == 0) { normal = Vec3f(0, 0, 1); } glNormal3f(normal[0], normal[1], normal[2]); MD2TexCoord* texCoord = texCoords + triangle->texCoords[j]; glTexCoord2f(texCoord->texCoordX, texCoord->texCoordY); glVertex3f(pos[0], pos[1], pos[2]); } } glEnd (); // Tell OpenGL We've Finished glDepthFunc (GL_LESS); // Reset The Depth-Testing Mode ( NEW ) glCullFace (GL_BACK); // Reset The Face To Be Culled ( NEW ) glPolygonMode (GL_BACK, GL_FILL); // Reset Back-Facing Polygon Drawing Mode ( NEW ) glDisable (GL_BLEND); } Whereas this is the drawToon function in the 3DS loader void Model_3DS::drawToon() { float outlineWidth = 3.0f; // Width Of The Lines ( NEW ) float outlineColor[3] = { 0.0f, 0.0f, 0.0f }; // Color Of The Lines ( NEW ) //ORIGINAL CODE if (visible) { glPushMatrix(); // Move the model glTranslatef(pos.x, pos.y, pos.z); // Rotate the model glRotatef(rot.x, 1.0f, 0.0f, 0.0f); glRotatef(rot.y, 0.0f, 1.0f, 0.0f); glRotatef(rot.z, 0.0f, 0.0f, 1.0f); glScalef(scale, scale, scale); // Loop through the objects for (int i = 0; i < numObjects; i++) { // Enable texture coordiantes, normals, and vertices arrays if (Objects[i].textured) glEnableClientState(GL_TEXTURE_COORD_ARRAY); if (lit) glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_VERTEX_ARRAY); // Point them to the objects arrays if (Objects[i].textured) glTexCoordPointer(2, GL_FLOAT, 0, Objects[i].TexCoords); if (lit) glNormalPointer(GL_FLOAT, 0, Objects[i].Normals); glVertexPointer(3, GL_FLOAT, 0, Objects[i].Vertexes); // Loop through the faces as sorted by material and draw them for (int j = 0; j < Objects[i].numMatFaces; j ++) { // Use the material's texture Materials[Objects[i].MatFaces[j].MatIndex].tex.Use(); // AFTER THE TEXTURE IS APPLIED I INSERT THE TOON FUNCTIONS HERE (FIRST PASS) glHint (GL_LINE_SMOOTH_HINT, GL_NICEST); // Use The Good Calculations ( NEW ) glEnable (GL_LINE_SMOOTH); // Cel-Shading Code // glEnable (GL_TEXTURE_1D); // Enable 1D Texturing ( NEW ) glBindTexture (GL_TEXTURE_1D, shaderTexture[0]); // Bind Our Texture ( NEW ) glColor3f (1.0f, 1.0f, 1.0f); // Set The Color Of The Model ( NEW ) glPushMatrix(); // Move the model glTranslatef(Objects[i].pos.x, Objects[i].pos.y, Objects[i].pos.z); // Rotate the model glRotatef(Objects[i].rot.z, 0.0f, 0.0f, 1.0f); glRotatef(Objects[i].rot.y, 0.0f, 1.0f, 0.0f); glRotatef(Objects[i].rot.x, 1.0f, 0.0f, 0.0f); // Draw the faces using an index to the vertex array glDrawElements(GL_TRIANGLES, Objects[i].MatFaces[j].numSubFaces, GL_UNSIGNED_SHORT, Objects[i].MatFaces[j].subFaces); glPopMatrix(); } glDisable (GL_TEXTURE_1D); // Disable 1D Textures ( NEW ) // THIS IS AN ADDED SECOND PASS AT THE VERTICES FOR THE OUTLINE glEnable (GL_BLEND); // Enable Blending ( NEW ) glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA); // Set The Blend Mode ( NEW ) glPolygonMode (GL_BACK, GL_LINE); // Draw Backfacing Polygons As Wireframes ( NEW ) glLineWidth (outlineWidth); // Set The Line Width ( NEW ) glCullFace (GL_FRONT); // Don't Draw Any Front-Facing Polygons ( NEW ) glDepthFunc (GL_LEQUAL); // Change The Depth Mode ( NEW ) glColor3fv (&outlineColor[0]); // Set The Outline Color ( NEW ) for (int j = 0; j < Objects[i].numMatFaces; j ++) { glPushMatrix(); // Move the model glTranslatef(Objects[i].pos.x, Objects[i].pos.y, Objects[i].pos.z); // Rotate the model glRotatef(Objects[i].rot.z, 0.0f, 0.0f, 1.0f); glRotatef(Objects[i].rot.y, 0.0f, 1.0f, 0.0f); glRotatef(Objects[i].rot.x, 1.0f, 0.0f, 0.0f); // Draw the faces using an index to the vertex array glDrawElements(GL_TRIANGLES, Objects[i].MatFaces[j].numSubFaces, GL_UNSIGNED_SHORT, Objects[i].MatFaces[j].subFaces); glPopMatrix(); } glDepthFunc (GL_LESS); // Reset The Depth-Testing Mode ( NEW ) glCullFace (GL_BACK); // Reset The Face To Be Culled ( NEW ) glPolygonMode (GL_BACK, GL_FILL); // Reset Back-Facing Polygon Drawing Mode ( NEW ) glDisable (GL_BLEND); glPopMatrix(); } Finally this is the tex.Use() function that loads a BMP texture and somehow gets blended perfectly with the Toon shading void GLTexture::Use() { glEnable(GL_TEXTURE_2D); // Enable texture mapping glBindTexture(GL_TEXTURE_2D, texture[0]); // Bind the texture as the current one }

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• Send Mail through Jsp page.

  - by sourabhtaletiya

  hi friends ,i have tried alot to send mail via jsp page but i am not succeded. A error is coming javax.servlet.ServletException: 530 5.7.0 Must issue a STARTTLS command first. x1sm5029316wbx.19 <html> <head> <title>JSP JavaMail Example </title> </head> <body> <%@ page import="java.util.*" %> <%@ page import="javax.mail.*" %> <%@ page import="javax.mail.internet.*" %> <%@ page import="javax.activation.*" %> <% java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider()); Properties props = System.getProperties(); props.put("mail.smtp.starttls.enable","true"); props.put("mail.smtp.starttls.required","true"); String host = "smtp.gmail.com"; String to = request.getParameter("to"); String from = request.getParameter("from"); String subject = request.getParameter("subject"); String messageText = request.getParameter("body"); boolean sessionDebug = false; props.put("mail.smtp.host", "smtp.gmail.com"); props.put("mail.transport.protocol", "smtp"); props.put("mail.smtp.port", "25"); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); props.put("mail.smtp.socketFactory.port","25"); props.put("mail.smtp.starttls.enable","true"); Session mailSession = Session.getDefaultInstance(props, null); mailSession.setDebug(sessionDebug); Message msg = new MimeMessage(mailSession); props.put("mail.smtp.starttls.enable","true"); msg.setFrom(new InternetAddress(from)); InternetAddress[] address = {new InternetAddress(to)}; msg.setRecipients(Message.RecipientType.TO, address); msg.setSubject(subject); msg.setSentDate(new Date()); msg.setText(messageText); props.put("mail.smtp.starttls.enable","true"); Transport tr = mailSession.getTransport("smtp"); tr.connect(host, "sourabh.web7", "june251989"); msg.saveChanges(); // don't forget this props.put("mail.smtp.starttls.enable","true"); tr.sendMessage(msg, msg.getAllRecipients()); tr.close(); // Transport.send(msg); /* out.println("Mail was sent to " + to); out.println(" from " + from); out.println(" using host " + host + ".");*/ %> </table> </body> </html>

  Read the article

• dns queries not using nscd for caching

  - by xenoterracide

  I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

  Read the article

• DNS lookups failing somewhere between firewall and router

  - by TessellatingHeckler

  we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

  Read the article

• dns queries not using nscd for caching

  - by xenoterracide

  I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >