Search Results

Search found 8046 results on 322 pages for 'forward lookup zone'.

Page 46/322 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• SSH not working over IPSec tunnel (Strongswan)

  - by PattPatel

  I configured a small network on a cloud virtual machine. This virtual machine has a static IP address assigned to eth0 interface that I'll call $EXTIP. mydomain.com points to $EXTIP. Inside, I have some linux containers, that get their ip through DHCP in the Subnet 10.0.0.0/24 (i called the virtual interface nat ). They run some services that can be reached through DNAT. Then I wanted to connect to these containers through an IPSec tunnel, so I configured StrongSwan. ipsec.conf: conn %default dpdaction=none rekey=no conn remote keyexchange=ikev2 ike=######## left=[$EXTIP] leftsubnet=10.0.1.0/24,10.0.0.0/24 leftauth=pubkey lefthostaccess=yes leftcert=########.pem leftfirewall=yes leftid="#########" right=%any rightsourceip=10.0.1.0/24 rightauth=######## rightid=%any rightsendcert=never eap_identity=%any auto=add type=tunnel Everything works fine, IPSec clients get IPs of the 10.0.1.0/24 subnet and can reach the containers subnet. My problem is that I'm not able to get SSH connections over the tunnel. It simply does not work, ssh client does not produce any output. Sniffing with tcpdump gives: tcpdump: 09:50:29.648206 ARP, Request who-has 10.0.0.1 tell mydomain.com, length 28 09:50:29.648246 ARP, Reply 10.0.0.1 is-at 00:ff:aa:00:00:01 (oui Unknown), length 28 09:50:29.648253 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [S], seq 4007849772, win 29200, options [mss 1460,sackOK,TS val 1151153 ecr 0,nop,wscale 7], length 0 09:50:29.648296 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [S.], seq 2809522632, ack 4007849773, win 14480, options [mss 1460,sackOK,TS val 11482992 ecr 1151153,nop,wscale 6], length 0 09:50:29.677225 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 2809522633, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 0 09:50:29.679370 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 0:23, ack 1, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 23 09:50:29.679403 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483002 ecr 1151162], length 0 09:50:29.684337 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1:32, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 31 09:50:29.685471 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1448 09:50:29.685519 IP mydomain.com > 10.0.0.1: ICMP mydomain.com unreachable - need to frag (mtu 1422), length 556 09:50:29.685567 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1402, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1370 09:50:29.685572 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 1402:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 78 09:50:29.714601 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 32, win 229, options [nop,nop,TS val 1151173 ecr 11483003], length 0 09:50:29.714642 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483012 ecr 1151173], length 120 09:50:29.723649 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 1393:1959, ack 32, win 229, options [nop,nop,TS val 1151174 ecr 11483003], length 566 09:50:29.723677 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483015 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 0 09:50:29.725688 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1480, win 251, options [nop,nop,TS val 1151177 ecr 11483003], length 0 09:50:29.952394 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483084 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 120 09:50:29.981056 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1600, win 251, options [nop,nop,TS val 1151253 ecr 11483084,nop,nop,sack 1 {1480:1600}], length 0 If you need it this is my iptables configuration file: iptables: *filter :INPUT ACCEPT [144:9669] :FORWARD DROP [0:0] :OUTPUT ACCEPT [97:15649] :interfacce-trusted - [0:0] :porte-trusted - [0:0] -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -j interfacce-trusted -A FORWARD -j porte-trusted -A FORWARD -j REJECT --reject-with icmp-host-unreachable -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A interfacce-trusted -i nat -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -j ACCEPT -A porte-trusted -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -j ACCEPT COMMIT *nat :PREROUTING ACCEPT [10:600] :INPUT ACCEPT [10:600] :OUTPUT ACCEPT [4:268] :POSTROUTING ACCEPT [18:1108] -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:80 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 443 -j DNAT --to-destination 10.0.0.1:443 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 8069 -j DNAT --to-destination 10.0.0.3:1234 -A POSTROUTING -s 10.0.0.0/24 -o eth0 -m policy --dir out --pol ipsec -j ACCEPT -A POSTROUTING -s 10.0.1.0/24 -o nat -j MASQUERADE -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE COMMIT Probably I'm missing something stupid... Thanks in advance for helping :))

  Read the article

• Allowing Google to bypass CAPTCHA verification - sensible or not?

  - by edanfalls

  My web site has a database lookup; filling out a CAPTCHA gives you 5 minutes of lookup time. There is also some custom code to detect any automated scripts. I do this as I don't want someone data mining my site. The problem is that Google does not see the lookup results when it crawls my site. If someone is searching for a string that is present in the result of a lookup, I would like them to find this page by Googling it. The obvious solution to me is to use the PHP variable $_SERVER['HTTP_USER_AGENT'] to bypass the CAPTCHA and custom security code for the Google bots. My question is whether this is sensible or not. People could then use Google's cache to view the lookup results without having to fill out the CAPTCHA, but would Google's own script detection methods prevent them from data mining these pages? Or would there be some way for people to make $_SERVER['HTTP_USER_AGENT'] appear as Google to bypass the security measures? Thanks in advance.

  Read the article

• Dynamic scoping in Clojure?

  - by j-g-faustus

  Hi, I'm looking for an idiomatic way to get dynamically scoped variables in Clojure (or a similar effect) for use in templates and such. Here is an example problem using a lookup table to translate tag attributes from some non-HTML format to HTML, where the table needs access to a set of variables supplied from elsewhere: (def *attr-table* ; Key: [attr-key tag-name] or [boolean-function] ; Value: [attr-key attr-value] (empty array to ignore) ; Context: Variables "tagname", "akey", "aval" '( ; translate :LINK attribute in <a> to :href [:LINK "a"] [:href aval] ; translate :LINK attribute in <img> to :src [:LINK "img"] [:src aval] ; throw exception if :LINK attribute in any other tag [:LINK] (throw (RuntimeException. (str "No match for " tagname))) ; ... more rules ; ignore string keys, used for internal bookkeeping [(string? akey)] [] )) ; ignore I want to be able to evaluate the rules (left hand side) as well as the result (right hand side), and need some way to put the variables in scope at the location where the table is evaluated. I also want to keep the lookup and evaluation logic independent of any particular table or set of variables. I suppose there are similar issues involved in templates (for example for dynamic HTML), where you don't want to rewrite the template processing logic every time someone puts a new variable in a template. Here is one approach using global variables and bindings. I have included some logic for the table lookup: ;; Generic code, works with any table on the same format. (defn rule-match? [rule-val test-val] "true if a single rule matches a single argument value" (cond (not (coll? rule-val)) (= rule-val test-val) ; plain value (list? rule-val) (eval rule-val) ; function call :else false )) (defn rule-lookup [test-val rule-table] "looks up rule match for test-val. Returns result or nil." (loop [rules (partition 2 rule-table)] (when-not (empty? rules) (let [[select result] (first rules)] (if (every? #(boolean %) (map rule-match? select test-val)) (eval result) ; evaluate and return result (recur (rest rules)) ))))) ;; Code specific to *attr-table* (def tagname) ; need these globals for the binding in html-attr (def akey) (def aval) (defn html-attr [tagname h-attr] "converts to html attributes" (apply hash-map (flatten (map (fn [[k v :as kv]] (binding [tagname tagname akey k aval v] (or (rule-lookup [k tagname] *attr-table*) kv))) h-attr )))) (defn test-attr [] "test conversion" (prn "a" (html-attr "a" {:LINK "www.google.com" "internal" 42 :title "A link" })) (prn "img" (html-attr "img" {:LINK "logo.png" }))) user=> (test-attr) "a" {:href "www.google.com", :title "A link"} "img" {:src "logo.png"} This is nice in that the lookup logic is independent of the table, so it can be reused with other tables and different variables. (Plus of course that the general table approach is about a quarter of the size of the code I had when I did the translations "by hand" in a giant cond.) It is not so nice in that I need to declare every variable as a global for the binding to work. Here is another approach using a "semi-macro", a function with a syntax-quoted return value, that doesn't need globals: (defn attr-table [tagname akey aval] `( [:LINK "a"] [:href ~aval] [:LINK "img"] [:src ~aval] [:LINK] (throw (RuntimeException. (str "No match for " tagname))) ; ... more rules [(string? ~akey)] [] ))) Only a couple of changes are needed to the rest of the code: In rule-match?, when syntax-quoted the function call is no longer a list: - (list? rule-val) (eval rule-val) + (seq? rule-val) (eval rule-val) In html-attr: - (binding [tagname tagname akey k aval v] - (or (rule-lookup [k tagname] *attr-table*) kv))) + (or (rule-lookup [k tagname] (attr-table tagname k v)) kv))) And we get the same result without globals. (And without dynamic scoping.) Are there other alternatives to pass along sets of variable bindings declared elsewhere, without the globals required by Clojure's binding? Is there an idiomatic way of doing it, like Ruby's binding or Javascript's function.apply(context)?

  Read the article

• using dummy row with NOT NULL to solve DEFAULT NULL

  - by Tony38

  I know having DEFAULT NULLS is not a good practice but I have many optional lookup values which are FK in the system so to solve this issue here is what i am doing: I use NOT NULL for every FK / lookup colunms. I have the first row in every lookup table which is PK id = 1 as a dummy row with just "none" in all the columns. This way I can use NOT NULL in my schema and if needed reference to the none row values PK =1 for FKs which do not have any lookup value. Is this a good design or any other work arounds? EDIT: I have: Neighborhood table Postal table. Every neighborhood has a city, so the FK can be NOT NULL. But not every postal code belongs to a neighborhood. Some do, some don't depending on the country. So if i use NOT NULL for the FK between postal and neighborhood then I will be screwed as there has to be some value entered. So what i am doing in essence is: have a row in every table to be a dummy row just to link the FKs. This way row one in neighborhood table will be: n_id = 1 name =none etc... In postal table I can have: postal_code = 3456A3 FK (city) = Moscow FK (neighborhood_id)=1 as a NOT NULL. If I don't have a dummy row in the neighborhood lookup table then I have to declare FK (neighborhood_id) as a Default null column and store blanks in the table. This is an example but there is a huge number of values which will have blanks then in many tables.

  Read the article

• javax.naming.NameNotFoundException: Name [comp/env] is not bound in this Context. Unable to find [comp] error with java scheduler

  - by Morgan Azhari

  What I'm trying to do is to update my database after a period of time. So I'm using java scheduler and connection pooling. I don't know why but my code only working once. It will print: init success success javax.naming.NameNotFoundException: Name [comp/env] is not bound in this Context. Unable to find [comp]. at org.apache.naming.NamingContext.lookup(NamingContext.java:820) at org.apache.naming.NamingContext.lookup(NamingContext.java:168) at org.apache.naming.SelectorContext.lookup(SelectorContext.java:158) at javax.naming.InitialContext.lookup(InitialContext.java:411) at test.Pool.main(Pool.java:25) ---> line 25 is Context envContext = (Context)initialContext.lookup("java:/comp/env"); I don't know why it only works once. I already test it if I didn't running it without java scheduler and it works fine. No error whatsoerver. Don't know why i get this error if I running it using scheduler. Hope someone can help me. My connection pooling code: public class Pool { public DataSource main() { try { InitialContext initialContext = new InitialContext(); Context envContext = (Context)initialContext.lookup("java:/comp/env"); DataSource datasource = new DataSource(); datasource = (DataSource)envContext.lookup("jdbc/test"); return datasource; } catch (Exception ex) { ex.printStackTrace(); } return null; } } my web.xml: <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd"> <listener> <listener-class> package.test.Pool</listener-class> </listener> <resource-ref> <description>DB Connection Pooling</description> <res-ref-name>jdbc/test</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> Context.xml: <?xml version="1.0" encoding="UTF-8"?> <Context path="/project" reloadable="true"> <Resource auth="Container" defaultReadOnly="false" driverClassName="com.mysql.jdbc.Driver" factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" initialSize="0" jdbcInterceptors="org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer" jmxEnabled="true" logAbandoned="true" maxActive="300" maxIdle="50" maxWait="10000" minEvictableIdleTimeMillis="300000" minIdle="30" name="jdbc/test" password="test" removeAbandoned="true" removeAbandonedTimeout="60" testOnBorrow="true" testOnReturn="false" testWhileIdle="true" timeBetweenEvictionRunsMillis="30000" type="javax.sql.DataSource" url="jdbc:mysql://localhost:3306/database?noAccessToProcedureBodies=true" username="root" validationInterval="30000" validationQuery="SELECT 1"/> </Context> my java scheduler public class Scheduler extends HttpServlet{ public void init() throws ServletException { System.out.println("init success"); try{ Scheduling_test test = new Scheduling_test(); ScheduledExecutorService executor = Executors.newScheduledThreadPool(100); ScheduledFuture future = executor.scheduleWithFixedDelay(test, 1, 60 ,TimeUnit.SECONDS); }catch(Exception e){ e.printStackTrace(); } } } Schedule_test public class Scheduling_test extends Thread implements Runnable{ public void run(){ Updating updating = new Updating(); updating.run(); } } updating public class Updating{ public void run(){ ResultSet rs = null; PreparedStatement p = null; StringBuilder sb = new StringBuilder(); Pool pool = new Pool(); Connection con = null; DataSource datasource = null; try{ datasource = pool.main(); con=datasource.getConnection(); sb.append("SELECT * FROM database"); p = con.prepareStatement(sb.toString()); rs = p.executeQuery(); rs.close(); con.close(); p.close(); datasource.close(); System.out.println("success"); }catch (Exception e){ e.printStackTrace(); } }

  Read the article

• iptables : how to correctly allow incoming and outgoing traffic for certain ports?

  - by Rubytastic

  Im trying to get incoming and outgoing traffic to be enabled on specific ports, because I block everything at the end of the iptables rules. INPUT and FORWARD reject. What would be the appropiate way to open certain ports for all traffic incoming and outgoing? From docs I found below but one has to really define both lines? iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT I try to open ports for xmpp service and some other deamons running on server. Rules: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP # Prevent DDOS attacks (http://blog.bodhizazen.net/linux/prevent-dos-with-iptables/) # Disallow HTTPS -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 50/minute --limit-burst 200 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -m limit --limit 50/second --limit-burst 50 -j ACCEPT -A INPUT -p tcp --dport 443 -j DROP # Allow SSH connections # The -dport number should be the same port number you set in sshd_config -A INPUT -p tcp -s <myip> --dport ssh -j ACCEPT -A INPUT -p tcp -s <myip> --dport 5984 -j ACCEPT -A INPUT -p tcp --dport ssh -j REJECT # Attempt to block portscans # Anyone who tried to portscan us is locked out for an entire day. -A INPUT -m recent --name portscan --rcheck --seconds 86400 -j DROP -A FORWARD -m recent --name portscan --rcheck --seconds 86400 -j DROP # Once the day has passed, remove them from the portscan list -A INPUT -m recent --name portscan --remove -A FORWARD -m recent --name portscan --remove # These rules add scanners to the portscan list, and log the attempt. -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP # Stop smurf attacks -A INPUT -p icmp -m icmp --icmp-type address-mask-request -j DROP -A INPUT -p icmp -m icmp --icmp-type timestamp-request -j DROP -A INPUT -p icmp -m icmp -j DROP # Drop excessive RST packets to avoid smurf attacks -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/second --limit-burst 2 -j ACCEPT # Don't allow pings through -A INPUT -p icmp -m icmp --icmp-type 8 -j DROP # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

  Read the article

• iptables question

  - by RubyFreak

  i have a small network, with one valid IP and a firewall with 3 network interfaces (LAN, WAN, DMZ). I want to enable PAT on this valid IP to redirect http traffic to a server in my DMZ. (done) I want to enable MASQ on this ip from traffic that comes from my LAN (done) I want from my LAN as well to access my http server at DMZ. (partially) Question: in the above scenario, i cannot from my LAN, to access my http server in the DMZ, since it has the IP used by the MASQ (the only valid ip that i have). What would be the best option to solve this problem? network interfaces: eth0 (WAN) eth1 (DMZ) eth2 (LAN) /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE /sbin/iptables -A FORWARD --o eth1 -d 2.2.2.2 -p tcp --dport 80 -j ACCEPT /sbin/iptables -t nat -A PREROUTING -i eth0 -d 1.1.1.1 -p tcp --dport 80 -j DNAT --to 2.2.2.2 /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT /sbin/iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT

  Read the article

• Setup defaut email forwarding, Courier mail server

  - by DK M

  I'm using courier in cPanel. I have ROOT, and I want to setup like this: If you send any email to my server, it will forward to my email: [email protected] Or if my server receive any email, then forward it to [email protected] Or If my server receive an email, and that account is not exist, then forward it to my email. Please help, thanks :D

  Read the article

• In Fluent NHibernate, how would I map the following domain models?

  - by Brandon

  I have a user class that looks something like this public class User { public virtual int Id { get; set; } public virtual long ValueA { get; set; } public virtual int? ValueB { get; set; } } ValueA is automatically assigned by the system. It is used in a lookup that would map to UserClass. However, if a value for ValueB exists, then it would do the lookup for UserClass in a different way. Right now the way I handle it is to get the User and then perform a separate lookup each time. return user.ValueB.HasValue ? Find(user.ValueB.Value) : Find(user.ValueA); Is there any way to make Fluent NHibernate do this for me so I can have UserClass as a property on the User class instead of having to do the lookup separately? I was thinking of the ComponentMap but I'm not sure how to make it account for the two possible lookup values.

  Read the article

• block access to wrt from vlan using iptables dd-wrt

  - by NitroxDM

  I set up multiple isolated vlans in dd-wrt. Now I need to forward a port to vlan2. I isolated the vlans using: iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I FORWARD -i br0 -o vlan3 -j DROP iptables -I FORWARD -i br0 -o vlan4 -j DROP Now I need to block a clients on each vlan from accessing the router. This doesn't work: iptables -I INPUT -i br0 -o vlan2 --dport telnet -j REJECT --reject-with tcp-reset I'm new it iptables... am I missing something?

  Read the article

• Haskell maps returning a monad

  - by sabauma

  The lookup function in Data.Map and Data.IntMap currently return values wrapped in Maybe with the type signature lookup :: Ord k => k -> Map k a -> Maybe a It used to have the more general type of lookup :: (Monad m, Ord k) => k -> Map k a -> m a I realize the former likely reduces the need of extra type specification, but the latter would make it much more general and allow lookup to be used in list comprehensions. Is there any way to mimic this behavior with the newer version, or would I have to use an older version of the library?

  Read the article

• Ubuntu cannot access internet, LAN is fine

  - by Kevin Southworth

  I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• Hibernate multi column discriminator

  - by shikarishambu

  I have a single lookup table that manages all lookups - legacy and new lookup table structure is context,name, code, value context is either legacy or new name is the name of the lookup - state, status etc...for example code is the code and value is the value associated with the code Is there a way to specify multiple columns as discriminators so that I can get all legacy state code/values or all new status code/values. Is there a different way to do this if discriminators cannot do it? <class name="com.company.domain.Lookup"> <id name="Id" column="id" type="big_integer"> <generator class="org.hibernate.id.TableHiLoGenerator" /> </id> <discriminator column="context" insert="false" /> <property name="code" type="string"/> <property name="value" type="string"/> <property name="desc" type="string"/> <subclass name="com.company.domain.LegacyLookup" discriminator-value="legacy">

  Read the article

• Twitter API with urllib2 in python

  - by Dirk Nachbar

  I want to use the Twitter API in Python to lookup user ids from name using the lookup method. I have done similar requests simply using response = urllib2.urlopen('http://search.twitter.com...') but for this one I need authentication. I don't think I can do it through the Google python twitter API because it doesn't have the lookup method. Any ideas how can I can auth with urllib2??

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• Return dataset in dataflow

  - by praveen

  Hi All, Could I get ideas on retrieving the dataset using lookup method. Basically, my scenario as I have source data needs to lookup for other source table and on matching column from source I need to get all the records from other source data. its a one to many relations. I tried Lookup but gives only one record on matching condition, OLE DB command don't retrieve any data as it will do only Insert/Update operations. Thanks prav

  Read the article

• How can I get a project type on Netbeans Platform?

  - by Fabio

  Hi folks, Is there a way to know the type of a selected project? I would like to do some specific actions depending of the project type like a J2SE project. Below is the only way that I found to do that: public final class MyAction extends CookieAction { @Override public boolean isEnabled() { if(this.getActivatedNodes() == null || this.getActivatedNodes().length != 1) { return false; } Lookup lookup = this.getActivatedNodes()[0].getLookup(); // gets the selected project Project currentProject = lookup.lookup(Project.class); // checks if the selected project is a J2SE Project or a Maven Project if(currentProject != null && (currentProject.getClass().getSimpleName().equals("J2SEProject") || currentProject.getClass().getSimpleName().equals("NbMavenProjectImpl"))) { return true; } return false; }}

  Read the article

• Bind9 not doing anything with forwarded query responses?

  - by Rykaro

  I have a Bind DNS server that is the local production DNS server and a Windows 2008 R2 domain controller which provides DNS for a lab environment with the domain xyz.lab. I've configured the Bind DNS to forward DNS requests for the domain xyz.lab to the Windows DNS server with this config: zone "xyz.lab" { type forward; forward only; forwarders { x.x.x.x; }; }; zone "x.x.x.in-addr.arpa" { type forward; forward only; forwarders { x.x.x.x; }; }; And Bind options are (the all_internal acl includes the subnets of both the production and lab networks as well as the loopback of the bind server): allow-query { all_internal; }; allow-recursion { all_internal; }; allow-transfer { none; }; notify no; minimal-responses yes; version "unknown"; Unfortunately, when I do an nslookup or dig on the bind server for a host on the lab domain, the request times out. The logs on the Windows 2008 DNS server show it receiving the query and responding to it and a network packet trace shows the query responses arriving at the Bind DNS server. The servers reside on the same switch with a router providing connectivity between the layer 3 subnets (production and lab are on different subnets) and there is a round trip time of between 3ms and 5ms on pings between the two servers, so I don't think there is an issue with latency causing a timeout of the query. In summary a query-response arrives back at the Bind server and the nslookup/dig times-out. Why does the Bind DNS not seem to be doing anything with the query responses when it receives them?

  Read the article

• excel vba: setting the formula to equal A or B if not found A

  - by every_answer_gets_a_point

  i have a vba line of code like this: ActiveCell.FormulaR1C1 = "=LOOKUP(""ETG_C"",RC[-10],RC[-8])" i would like to know how is it possible to have the activecell formula be something else in the case that it does not find ETG_C for example: =if(not(LOOKUP(""ETG_C"",RC[-10],RC[-8]))) then =LOOKUP(""something_else"",RC[-10],RC[-8])

  Read the article

• Configure server on network to analyze traffic

  - by Strajan Sebastian

  I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

  Read the article

• Does a syntax for this exist? In any language?

  - by Michael

  It seems pretty common to me to have an argument, in a dynamically typed language that is either an Object or a key to lookup that object. For instance when I'm working with a database I might have a method getMyRelatedStuff(person) All I really need to lookup the related stuff is the id of the person so my method could look like this in python: def getMyRelatedStuff(person_or_id): id = person_or_id.id if isinstance(person,User) else person_or_id #do some lookup Or going the other direction: def someFileStuff(file_or_name): file = file_or_name if hasattr(file,'write') else open(file_or_name)

  Read the article

• what are the following keyboard shortcuts in a terminal?

  - by kloop

  I am trying to figure out a few keyboard shortcuts in a terminal in mac osx (and Linux): In the command line: go to the next word go to the previous word go to the end of the line go to the beginning of the line This will make it easier to change commands.. Right now, I am using the left/right arrow keys, which is time consuming. I used bind -p as suggested below. EDIT: What do the following key bindings mean? "\e\e[D": backward-word "\e[1;5D": backward-word "\e[5D": backward-word "\eb": backward-word and: "\e\e[C": forward-word "\e[1;5C": forward-word "\e[5C": forward-word "\ef": forward-word

  Read the article

• Configuring jdbc-pool (tomcat 7)

  - by john

  i'm having some problems with tomcat 7 for configuring jdbc-pool : i`ve tried to follow this example: http://www.tomcatexpert.com/blog/2010/04/01/configuring-jdbc-pool-high-concurrency so i have: conf/server.xml <GlobalNamingResources> <Resource type="javax.sql.DataSource" name="jdbc/DB" factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/mydb" username="user" password="password" /> </GlobalNamingResources> conf/context.xml <Context> <ResourceLink type="javax.sql.DataSource" name="jdbc/LocalDB" global="jdbc/DB" /> <Context> and when i try to do this: Context initContext = new InitialContext(); Context envContext = (Context)initContext.lookup("java:/comp/env"); DataSource datasource = (DataSource)envContext.lookup("jdbc/LocalDB"); Connection con = datasource.getConnection(); i keep getting this error: javax.naming.NameNotFoundException: Name jdbc is not bound in this Context at org.apache.naming.NamingContext.lookup(NamingContext.java:803) at org.apache.naming.NamingContext.lookup(NamingContext.java:159) pls help tnx

  Read the article

• Netflix, jQuery, JSONP, and OData

  - by Stephen Walther

  At the last MIX conference, Netflix announced that they are exposing their catalog of movie information using the OData protocol. This is great news! This means that you can take advantage of all of the advanced OData querying features against a live database of Netflix movies. In this blog entry, I’ll demonstrate how you can use Netflix, jQuery, JSONP, and OData to create a simple movie lookup form. The form enables you to enter a movie title, or part of a movie title, and display a list of matching movies. For example, Figure 1 illustrates the movies displayed when you enter the value robot into the lookup form.   Using the Netflix OData Catalog API You can learn about the Netflix OData Catalog API at the following website: http://developer.netflix.com/docs/oData_Catalog The nice thing about this website is that it provides plenty of samples. It also has a good general reference for OData. For example, the website includes a list of OData filter operators and functions. The Netflix Catalog API exposes 4 top-level resources: Titles – A database of Movie information including interesting movie properties such as synopsis, BoxArt, and Cast. People – A database of people information including interesting information such as Awards, TitlesDirected, and TitlesActedIn. Languages – Enables you to get title information in different languages. Genres – Enables you to get title information for specific movie genres. OData is REST based. This means that you can perform queries by putting together the right URL. For example, if you want to get a list of the movies that were released after 2010 and that had an average rating greater than 4 then you can enter the following URL in the address bar of your browser: http://odata.netflix.com/Catalog/Titles?$filter=ReleaseYear gt 2010&AverageRating gt 4 Entering this URL returns the movies in Figure 2. Creating the Movie Lookup Form The complete code for the Movie Lookup form is contained in Listing 1. Listing 1 – MovieLookup.htm <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Netflix with jQuery</title> <style type="text/css"> #movieTemplateContainer div { width:400px; padding: 10px; margin: 10px; border: black solid 1px; } </style> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> </head> <body> <label>Search Movies:</label> <input id="movieName" size="50" /> <button id="btnLookup">Lookup</button> <div id="movieTemplateContainer"></div> <script id="movieTemplate" type="text/html"> <div> <img src="<%=BoxArtSmallUrl %>" /> <strong><%=Name%></strong> <p> <%=Synopsis %> </p> </div> </script> <script type="text/javascript"> $("#btnLookup").click(function () { // Build OData query var movieName = $("#movieName").val(); var query = "http://odata.netflix.com/Catalog" // netflix base url + "/Titles" // top-level resource + "?$filter=substringof('" + escape(movieName) + "',Name)" // filter by movie name + "&$callback=callback" // jsonp request + "&$format=json"; // json request // Make JSONP call to Netflix $.ajax({ dataType: "jsonp", url: query, jsonpCallback: "callback", success: callback }); }); function callback(result) { // unwrap result var movies = result["d"]["results"]; // show movies in template var showMovie = tmpl("movieTemplate"); var html = ""; for (var i = 0; i < movies.length; i++) { // flatten movie movies[i].BoxArtSmallUrl = movies[i].BoxArt.SmallUrl; // render with template html += showMovie(movies[i]); } $("#movieTemplateContainer").html(html); } </script> </body> </html> The HTML page in Listing 1 includes two JavaScript libraries: <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> The first script tag retrieves jQuery from the Microsoft Ajax CDN. You can learn more about the Microsoft Ajax CDN by visiting the following website: http://www.asp.net/ajaxLibrary/cdn.ashx The second script tag is used to reference Resig’s micro-templating library. Because I want to use a template to display each movie, I need this library: http://ejohn.org/blog/javascript-micro-templating/ When you enter a value into the Search Movies input field and click the button, the following JavaScript code is executed: // Build OData query var movieName = $("#movieName").val(); var query = "http://odata.netflix.com/Catalog" // netflix base url + "/Titles" // top-level resource + "?$filter=substringof('" + escape(movieName) + "',Name)" // filter by movie name + "&$callback=callback" // jsonp request + "&$format=json"; // json request // Make JSONP call to Netflix $.ajax({ dataType: "jsonp", url: query, jsonpCallback: "callback", success: callback }); This code Is used to build a query that will be executed against the Netflix Catalog API. For example, if you enter the search phrase King Kong then the following URL is created: http://odata.netflix.com/Catalog/Titles?$filter=substringof(‘King%20Kong’,Name)&$callback=callback&$format=json This query includes the following parameters: $filter – You assign a filter expression to this parameter to filter the movie results. $callback – You assign the name of a JavaScript callback method to this parameter. OData calls this method to return the movie results. $format – you assign either the value json or xml to this parameter to specify how the format of the movie results. Notice that all of the OData parameters -- $filter, $callback, $format -- start with a dollar sign $. The Movie Lookup form uses JSONP to retrieve data across the Internet. Because WCF Data Services supports JSONP, and Netflix uses WCF Data Services to expose movies using the OData protocol, you can use JSONP when interacting with the Netflix Catalog API. To learn more about using JSONP with OData, see Pablo Castro’s blog: http://blogs.msdn.com/pablo/archive/2009/02/25/adding-support-for-jsonp-and-url-controlled-format-to-ado-net-data-services.aspx The actual JSONP call is performed by calling the $.ajax() method. When this call successfully completes, the JavaScript callback() method is called. The callback() method looks like this: function callback(result) { // unwrap result var movies = result["d"]["results"]; // show movies in template var showMovie = tmpl("movieTemplate"); var html = ""; for (var i = 0; i < movies.length; i++) { // flatten movie movies[i].BoxArtSmallUrl = movies[i].BoxArt.SmallUrl; // render with template html += showMovie(movies[i]); } $("#movieTemplateContainer").html(html); } The movie results from Netflix are passed to the callback method. The callback method takes advantage of Resig’s micro-templating library to display each of the movie results. A template used to display each movie is passed to the tmpl() method. The movie template looks like this: <script id="movieTemplate" type="text/html"> <div> <img src="<%=BoxArtSmallUrl %>" /> <strong><%=Name%></strong> <p> <%=Synopsis %> </p> </div> </script>   This template looks like a server-side ASP.NET template. However, the template is rendered in the client (browser) instead of the server. Summary The goal of this blog entry was to demonstrate how well jQuery works with OData. We managed to use a number of interesting open-source libraries and open protocols while building the Movie Lookup form including jQuery, JSONP, JSON, and OData.

  Read the article

• (Quaternion based) Trouble moving foward based on model rotation

  - by ChocoMan

  Using quaternions, I'm having trouble moving my model in its facing direction. Currently the model moves can move in all cardinal directions with no problems. The problem comes when I rotate the move as it still travelling in the direction of world space. Meaning, if I'm moving forward, backward or any other direction while rotating the model, the model acts like its a figure skater spinning while traveling in the same direction. How do I update the direction of travel proper with the facing direction of the model? Rotates model on Y-axis: Yaw = pController.ThumbSticks.Right.X * MathHelper.ToRadians(speedAngleMAX); AddRotation = Quaternion.CreateFromYawPitchRoll(yaw, 0, 0); ModelLoad.MRotation *= AddRotation; MOrientation = Matrix.CreateFromQuaternion(ModelLoad.MRotation); Moves model forward: // Move Forward if (pController.IsButtonDown(Buttons.LeftThumbstickUp)) { SpeedX = (float)(Math.Sin(ModelLoad.ModelRotation)) * FWDSpeedMax * pController.ThumbSticks.Left.Y * (float)gameTime.ElapsedGameTime.TotalSeconds; SpeedZ = (float)(Math.Cos(ModelLoad.ModelRotation)) * FWDSpeedMax * pController.ThumbSticks.Left.Y * (float)gameTime.ElapsedGameTime.TotalSeconds; // Update model position ModelLoad._modelPos += Vector3.Forward * SpeedZ; ModelLoad._modelPos += Vector3.Left * SpeedX; }

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >