Search Results

Search found 27568 results on 1103 pages for 'git post receive'.

Page 46/1103 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • Changing git origin to point to an existing repository

    - by int3
    I'd like to make my local repo point to a different fork of the same project. Will this work? Do a merge with the 'target origin' Change the origin repo in my config file to the 'target origin' Also, if my local repo is not entirely identical to the new origin (say, I've resolved some merge conflicts in my favor), will these changes be pushed to the new origin when I do a git push, or will only commits made after the change of origin get pushed?

    Read the article

  • git rebase, keeping track of 'local' and 'remote'

    - by Benjol
    When doing a git rebase, I often have difficulty working out what is happening with the 'local' and 'remote' when resolving conflicts. I sometimes have the impression that they swap sides from one commit to the next. This is probably (definitely) because I still haven't properly understood. When rebasing, who is 'local' and who is 'remote'? (I use P4Merge for resolving conflicts)

    Read the article

  • Code Promotion with Git

    - by draxter
    Hi, I'm trying to figure how can I use git for multiple environments (dev-test-prod) with code promotion. I read a bit about branching but didn't understand much how can this solve my problem since I must have the ability to run all of the environments concurrently and separately from each other. Will be very thankful for some kind of how-to.

    Read the article

  • Git as a backup and Version Control System.

    - by gitnoob
    Hi. I want to use Git to backup my home drive, but I also want to use it as a version control system for projects that will be stored in my home drive. How would I go about doing that? Do I .gitignore all the projects root folders and make new repositories for them?

    Read the article

  • Git repository issues

    - by sreeni
    Hi, I am working on origin:abc remote repository . I want to update the origin:def repository in the remote repository in git. Can some please give me command for this?

    Read the article

  • Is there a way to easily convert a series of tarballs of a source tree into a git repository?

    - by Hotei
    I'm new to git and I have a moderately large number of weekly tarballs from a long running project. Each tarball has on average a few hundred files in it. I'm looking for a git strategy that will allow me to add the expanded contents of each tarball to a new git repository, starting from version 1.001 and going through version 1.650. As of this stage of the project 99.5% of tarball(n) is just a copy of version(n-1) - in other words, a perfect candidate for git. The desired end result is to have only the master branch remaining at the end of the process. I think I know git well enough to do this "by hand". As I understand it there is no possibility of a merge conflict since there will be no opportunity to change the master before the next version is added and committed. A shell script is my first guess, but I'm not sure how well bash will like it when git checkout branch_n gets processed while bash is executing in branch_n-1. For the purposes of this project the host environment is Ubuntu 10.4, resources available are 8 Gig RAM, 500 Gig Disk space free and 4 CPU processor at 3.ghz . I don't need someone else to solve the problem but I could use a nudge in the right direction as to how a git expert would approach it. Any advice from someone who's "been there done that" would be appreciated. Hotei PS: I have looked at site's suggested "related questions" and found nothing relevant.

    Read the article

  • Ultimate Get/Post with Android Thread for Dummies

    - by Jayomat
    Hi, I'm writing an app to check for the bus timetable's. Therefor I need to post some data to a html page, submit it, and parse the resulting page with htmlparser. Though it may be asked a lot, can some one help me identify if 1) this page does support post/get (I think it does) 2) which fields I need to use? 3) How to make the actual request? this is my code so far: String url = "http://busspur02.aseag.de/bs.exe?Cmd=RV&Karten=true&DatumT=30&DatumM=4&DatumJ=2010&ZeitH=&ZeitM=&Suchen=%28S%29uchen&GT0=&HT0=&GT1=&HT1="; String charset = "CP1252"; System.out.println("startFrom: "+start_from); System.out.println("goTo: "+destination); //String tag.v List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("HTO", start_from)); params.add(new BasicNameValuePair("HT1", destination)); params.add(new BasicNameValuePair("GTO", "Aachen")); params.add(new BasicNameValuePair("GT1", "Aachen")); params.add(new BasicNameValuePair("DatumT", day)); params.add(new BasicNameValuePair("DatumM", month)); params.add(new BasicNameValuePair("DatumJ", year)); params.add(new BasicNameValuePair("ZeitH", hour)); params.add(new BasicNameValuePair("ZeitM", min)); UrlEncodedFormEntity query = new UrlEncodedFormEntity(params, charset); HttpPost post = new HttpPost(url); post.setEntity(query); InputStream response = new DefaultHttpClient().execute(post).getEntity().getContent(); // Now do your thing with the facebook response. String source = readText(response,"CP1252"); Log.d(TAG_AVV,response.toString()); System.out.println("STREAM "+source); One person also gave me a hint to use firebug to read what's going on at the page, but I don't really understand what to look for, or more precisely, how to use the provided information. I also find it confusing, for example, that when I enter the data by hand, the url says, for example, "....HTO=Kaiserplatz&...", but in Firebug, the same Kaiserplatz is connected to a different field, in this case: \<\td class="Start3" Kaiserplatz <\/td (I inserted \ to make it visible) The last line in my code prints the html page, but without having send a request.. it's printed as if there was no input at all... My app is almost done, I hope someone can help me out to finish it! thanks in advance

    Read the article

  • ActiveMQ 5.2.0 + REST + HTTP POST = java.lang.OutOfMemoryError

    - by Bruce Loth
    First off, I am a newbie when it comes to JMS & ActiveMQ. I have been looking into a messaging solution to serve as middleware for a message producer that will insert XML messages into a queue via HTTP POST. The producer is an existing system written in C++ that cannot be modified (so Java and the C++ API are out). Using the "demo" examples and some trial and error, I have cobbled together a working example of what I want to do (on a windows box). The web.xml I configured in a test directory under "webapps" specifies that the HTTP POST messages received from the producer are to be handled by the MessageServlet. I added a line for the text app in "activemq.xml" ('ow' is the test app dir): I created a test script to "insert" messages into the queue which works well. The problem I am running into is that it as I continue to insert messages via REST/HTTP POST, the memory consumption and thread count used by ActiveMQ continues to rise (It happens when I have timely consumers as well as slow or non-existent consumers). When memory consumption gets around 250MB's and the thread count exceeds 5000 (as shown in windows task manager), ActiveMQ crashes and I see this in the log: Exception in thread "ActiveMQ Transport Initiator: vm://localhost#3564" java.lang.OutOfMemoryError: unable to create new native thread It is as if Jetty is spawning a new thread to handle each HTTP POST and the thread never dies. I did look at this page: http://activemq.apache.org/javalangoutofmemory.html and tried but that didn't fix the problem (although I didn't fully understand the implications of the change either). Does anyone have any ideas? Thanks! Bruce Loth PS - I included the "test message producer" python script below for what it is worth. I created batches of 100 messages and continued to run the script manually from the command line while watching the memory consumption and thread count of ActiveMQ in task manager. def foo(): import httplib, urllib body = "<?xml version='1.0' encoding='UTF-8'?>\n \ <ROOT>\n \ [snip: xml deleted to save space] </ROOT>" headers = {"content-type": "text/xml", "content-length": str(len(body))} conn = httplib.HTTPConnection("127.0.0.1:8161") conn.request("POST", "/ow/message/RDRCP_Inbox?type=queue", body, headers) response = conn.getresponse() print response.status, response.reason data = response.read() conn.close() ## end method definition ## Begin test code count = 0; while(count < 100): # Test with batches of 100 msgs count += 1 foo()

    Read the article

  • Best practices for cross platform git config?

    - by Bas Bossink
    Context A number of my application user configuration files are kept in a git repository for easy sharing across multiple machines and multiple platforms. Amongst these configuration files is .gitconfig which contains the following settings for handling the carriage return linefeed characters [core] autocrlf = true safecrlf = false Problem These settings also gets applied on a GNU/Linux platform which causes obscure errors. Question What are some best practices for handling these platform specific differences in configuration files? Proposed solution I realize this problem could be solved by having a branch for each platform and keeping the common stuff in master and merging with the platform branch when master moves forward. I'm wondering if there are any easier solutions to this problem?

    Read the article

  • Git fails when pushing commit to github

    - by Steve Melvin
    I cloned a git repo that I have hosted on github to my laptop. I was able to successfully push a couple of commits to github without problem. However, now I get the following error: Compressing objects: 100% (792/792), done. error: RPC failed; result=22, HTTP code = 411 Writing objects: 100% (1148/1148), 18.79 MiB | 13.81 MiB/s, done. Total 1148 (delta 356), reused 944 (delta 214) From here it just hangs and I finally have to ^C back to the terminal.

    Read the article

  • How can I mark a group of changes/changesets in SVN, Hg, or Git

    - by sylvanaar
    I would like to mark an arbitrary group of commits/changesets with a label. Commit 1 *Mark 1 Commit 2 *Mark 2 Commit 3 Commit 4 *Mark 1 Commit 5 *Mark 2 The goal is to easily locate all the changes for a specific mark, and to have that grouping persisted in the VCS directly, as opposed to some outside system like a bug tracking system. The location and ordering of the marks needs to be arbitrary, and should be able to work with both committed/uncommitted and pushed/unpushed changes. In SVN the best way I know is to just edit the commit notes and add some sort of special text that you can search for e.g. "**Mark 1". Or just to make a fake edit and commit it and use its commit note to list all the included revisions. Is there a better solution for SVN? Are there equivalent or better solutions for Hg or Git?

    Read the article

  • Trying to find a good strategy using Git for personal development on local/personal machine

    - by AJ
    A noob here. I have a personal Macbook and I want to use Git to track the changes etc. I want to just init a repo on my macbook and work there. Is this a good idea? What if: I have a main repo somewhere in my Macbook HD, like, /Users/user/projects/project1 and clone it to another area on my macbook where I actually perform development? But there is a lot of redundancy in this. I am a little confused and want to know what are the usual steps folks take in a similar personal development environment. Thanks a lot.

    Read the article

  • Git repository is out of sync after rebase

    - by Keyo
    I have squashed 2 commits (A and B) into one new commit (C). The previous two commits (A and B) where removed. I pushed these commits from my development repo to a central(bare) repository. The git-log on both repos confirms that commits A and B have been removed. The problem is when I do a pull on a third repository which already had (A and B) it now has all three commits (A, B and C). I would have thought the pull would synchronise these changes. Do I need to checkout A~1 and then merge in the new changes? This seems like a hassle, especially in a production environment.

    Read the article

  • Preview a git push

    - by Saverio Miroddi
    How can I see which commits are actually going to be pushed to a remote repository? As far as I know, whenever I pull master from the remote repository, commits are likely to be generated, even if they're empty. This causes the local master to be 'forward' even if there is really nothing to push. Now, if I try (from master): git cherry origin master I have an idea of what's going to be pushed, though this also display some commits that I've already pushed. Is there a way to display only the new content that's going to be pushed?

    Read the article

  • How can I view multiple git diffs side by side in vim

    - by Pete Hodgson
    I'd like to be able to run a command that opens up a git diff in vim, with a tab for each file in the diff set. So if for example I've changed files foo.txt and bar.txt in my working tree and I ran the command I would see vim open with two tabs. The first tab would contain a side-by-side diff between foo.txt in my working tree and foo.txt in the repository, and the second tab would contain a side-by-side diff for bar.txt. Anyone got any ideas?

    Read the article

  • How do I change a Git remote HEAD to point to something besides "master"

    - by jhs
    Short version: How do I set a Git remote's HEAD ref to point to something besides "master"? My project has a policy not to use a "master" branch (all branches are to have meaningful names). Furthermore, the canonical master repository is only accessible via ssh://, with no shell access (like GitHub or Unfuddle). My problem is that the remote repository still has a HEAD reference to refs/heads/master, but I need it to point to a different branch. This is causing two problems: When cloning the repo, there this, warning: remote HEAD refers to nonexistent ref, unable to checkout. That's confusing and inconvenient. The web-based code browser depends on HEAD as a basis for browsing the tree. I need HEAD to point to a valid branch, then.

    Read the article

  • Send post request from client to node.js

    - by Husar
    In order to learn node.js I have built a very simple guestbook app. There is basically just a comment form and a list of previous comments. Currently the app is client side only and the items are stored within local storage. What I want to do is send the items to node where I will save them using Mongo DB. The problem is I have not yet found a way to establish a connection to send data back and forth the client and node.js using POST requests. What I do now is add listeners to the request and wait for data I send: request.addListener('data', function(chunk) { console.log("Received POST data chunk '"+ chunk + "'."); }); On the client side I send the data using a simple AJAX request: $.ajax({ url: '/', type: 'post', dataType: 'json', data: 'test' }) This does not work at all in them moment. It could be that I don't know what url to place in the AJAX request 'url' parameter. Or the whole thing might just be the build using the wrong approach. I have also tried implementing the method described here, but also with no success. It would really help if anyone can share some tips on how to make this work (sending POST request from the client side to node and back) or share any good tutorials. thanks.

    Read the article

  • heroku using git branch is confusing!

    - by Stacia
    Ok, so I have a big github project that i'm not supposed to merge my little Stacia branch into. However, it seems like Heroku only takes pushing MASTER seriously. It looks like I pushed my branch, but for example if I only have my branch, it even acts like there's no code on the server. I can't even get my gems installed since the .gems file is on my branch. Basically I don't even want Heroku to know there's a master. I just want to use my test Stacia branch. But it keeps ignoring my local branch. Is there a way to do this? And again, I don't want to overwrite anything on the main Github repository (eeek!) but it would be ok probably if I had both master and my branch on heroku and merged them there. I am a total git novice (on windows no less) so please bear with me.

    Read the article

  • Excluding files from being deployed with Capistrano while still under version control with Git

    - by Jimmy Cuadra
    I want to start testing the JavaScript in my Rails apps with qUnit and I'm wondering how to keep the test JavaScript and test runner HTML page under version control (I'm using Git, of course) but keep them off the production server when I deploy the app with Capistrano. My first thought is to let Capistrano send all the code over as usual including the test files, and write a task to delete them at the end of the deployment process. This seems like sort of a hack, though. Is there a cleaner way to tell Capistrano to ignore certain parts of the repository when deploying?

    Read the article

  • Git pack file entry format

    - by Ben Collins
    My understanding of the Git pack file format is something like: Where the table is 32-bits wide, and the first three 32-bit words are the pack file header. The last row of 32 bits are the first 4 bytes of an entry. As I understand it, the size of the entry is specified by consecutive bytes with the MSB set, followed by compressed data. In the first byte whose MSB is not set, is the MSB part of the compressed data, or is it a gap? If it's part of the compressed data, how can you guarantee that when the data is compressed that bit won't be set?

    Read the article

  • Python Post Upload JPEG to Server?

    - by iJames
    It seems like this answer has been provided a bunch of times but in all of it, I'm still getting errors from the server and I'm sure it has to do with my code. I've tried HTTP, and HTTPConnection from httplib and both create quite different terminal outputs in terms of formatting/encoding so I'm not sure where the problem lies. Does anything stand out here? Or is there just a better way? Pieced together from an ancient article because I really needed to understand the basis of creating the post: http://code.activestate.com/recipes/146306-http-client-to-post-using-multipartform-data/ Note, the jpeg is supposed to be "unformatted". The pseudocode: boundary = "somerandomsetofchars" BOUNDARY = '--' + boundary CRLF = '\r\n' fields = [('aspecialkey','thevalueofthekey')] files = [('Image.Data','mypicture.jpg','/users/home/me/mypicture.jpg')] bodylines = [] for (key, value) in fields: bodylines.append(BOUNDARY) bodylines.append('Content-Disposition: form-data; name="%s"' % key) bodylines.append('') bodylines.append(value) for (key, filename, fileloc) in files: bodylines.append(BOUNDARY) bodylines.append('Content-Disposition: form-data; name="%s"; filename="%s"' % (key, filename)) bodylines.append('Content-Type: %s' % self.get_content_type(fileloc)) bodylines.append('') bodylines.append(open(fileloc,'r').read()) bodylines.append(BOUNDARY + '--') bodylines.append('') #print bodylines content_type = 'multipart/form-data; boundary=%s' % BOUNDARY body = CRLF.join(bodylines) #conn = httplib.HTTP("www.ahost.com") # In both this and below, the file part was garbling the rest of the body?!? conn = httplib.HTTPConnection("www.ahost.com") conn.putrequest('POST', "/myuploadlocation/uploadimage") headers = { 'content-length': str(len(body)), 'Content-Type' : content_type, 'User-Agent' : 'myagent' } for headerkey in headers: conn.putheader(headerkey, headers[headerkey]) conn.endheaders() conn.send(body) response = conn.getresponse() result = response.read() responseheaders = response.getheaders() It's interesting in that the real code I've implemented seems to work and is getting back valid responses, but the problem it it's telling me that it can't find the image data. Maybe this is particular to the server, but I'm just trying to rule out that I'm not doing some thing exceptionally stupid here. Or perhaps there's other methodologies for doing this more efficiently. I've not tried poster yet because I want to make sure I'm formatting the POST correctly first. I figure I can upgrade to poster after it's working yes?

    Read the article

  • Change the current branch to master in git

    - by Karel Bílek
    I have a repository in git. I made a branch, then did some changes both to the master and to the branch. Then, tens of commits later, I realized the branch is in much better state than the master, so I want the branch to "become" the master and disregard the changes on master. I cannot merge it, because I don't want to keep the changes on master. What should I do? (this will very possibly be a duplicate question, since it is trivial, but I have not found it here)

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >