Search Results

Search found 2436 results on 98 pages for 'hdd cloning'.

Page 46/98 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Can not copy files after installing windows

  - by Ali

  I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

  Read the article

• Where do vendors publish internal transfer rates of HDDs?

  - by red888

  So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

  Read the article

• Time Machine is getting stuck at "Preparing to Back Up" and my Trash isn't emptying

  - by zarose

  I have encountered two separate problems, but I am putting them in the same question in case they are related. First, my Trash would not empty. It seems to be getting stuck on certain files, because I will reset my Macbook and some of the files will be deleted, and then if I remove a file or two at random, more can be deleted. Some of these files had strange characters in their names. I tried changing the names to single characters, but this did not help. Next, I attempted to backup my Macbook using Time Machine. I plugged in the HDD I've been using for this, but every time I try to start the backup, Time Machine gets stuck at "Preparing to Back Up". I definitely need to know how to fix the Time Machine problem, but I am curious how to solve the trash problem as well, and whether or not these problems are related. EDIT: Console.app logged the following this morning before I left on a trip. I did not bring the HDD with me. 6/5/12 7:41:28.312 AM com.apple.backupd: Starting standard backup 6/5/12 7:41:46.877 AM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 7:41:58.368 AM com.apple.backupd: Backup failed with error: 19 6/5/12 7:59:08.999 AM com.apple.backupd: Starting standard backup 6/5/12 7:59:10.187 AM com.apple.backupd: Backing up to: /Volumes/Seagate 3TB Mac/Backups.backupdb 6/5/12 7:59:13.308 AM com.apple.backupd: Event store UUIDs don't match for volume: Macintosh HD 6/5/12 7:59:13.331 AM com.apple.backupd: Event store UUIDs don't match for volume: Blank 6/5/12 7:59:13.683 AM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|new event db| 6/5/12 8:23:31.807 AM com.apple.backupd: Backup canceled. 6/5/12 8:23:33.373 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected. 6/5/12 9:51:21.572 PM com.apple.backupd: Starting standard backup 6/5/12 9:51:22.515 PM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 9:51:32.741 PM com.apple.backupd: Backup failed with error: 19

  Read the article

• Are SATA II and SATA 3.0 Gbps compatible?

  - by Johnny Maelstrom

  I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

  Read the article

• Windows 7 Startup fails after installation

  - by Nadav S.

  I have installed Windows 7 Ultimate a week ago. Yesterday I've noticed that the SP1 update is available. After installation of SP1 the computer failed to startup, and had shown a black screen. I couldn't even go to safe mode and F8 didn't help. After some fixing attempts including system restore, startup repair, bootmgr & BCD rebuilding from CMD, I have decided to reinstall Windows (after all, it's only a week old) After the successful installation, I have decided to first install all available updates before I continue. So after the updates download & installation, the computer rebooted. And now I didn't see the black screen again - but in the "Starting Windows..." screen the logo didn't appear and the system didn't startup. Here I could go to safe mode selection window, but it didn't work either ("Loading Windows Files" but nothing). I've also tried: I thought that the CD was corrupted, so I've used a fresh new disk of Windows, tried x86 & x64 versions, the same symptoms, no change. Resetted the BIOS to default, no change. Memory diagnostic HDD diagnostic Restarted Windows WITHOUT INSTALLING UPDATES, but it had the same symptom, so maybe Windows Update is not the case?! I've tried installing it so many times - that I am simply stuck - I can't "reinstall Windows, because it is corrupted...". Maybe the HDD is corrupted? I've also checked it and didn't find a problem.

  Read the article

• Step by step instructions to make dos "see" and "access" usb hard drives

  - by Gireesh Venkateswaran

  I am stuck with an USB external hard drive (Maxtor 1 Touch) 750GB that crashed. I have photos and home movies (my son's birth, first birthday etc) that are very important to me. I am given to understand that Spinrite is a very good tool to use, but It does not come "with out of the box" capabilities to access USB drives. If I open the case to get the HDD out from my External HDD, I would compromise the warrenty and I would not be able to exchange the Drive. I have done a bit of research and have the drivers that could help. But the bit I am missing is, How to put it all together. I would really appreciate it if some one can give me step by step instruction where I can create a dos boot cd that can load the drivers and assign a drive letter to it so that I can make Dos "See" the external hard drive. I have a Toshiba satellite laptop that runs Windows XP (Home). It does not have a floppy drive. I will be greatful to your help in the regard.

  Read the article

• SSD for swap on Ubuntu server

  - by grs

  Currently I am reading SSD reviews and I wonder how much exactly I will benefit if I move the 24 GB swap from 7200rpm HDD to SSD. Does anyone implemented swap space on SSD? Is this generally good idea? On a side note: I read that ext4 has much better performance if the journal is on SSD. Anyone with such a setup? Thanks! Edit: Here I will answer the questions posted: Occasionally, relatively rare I am hitting the swap. I know what the swap is for and that is better to get more RAM. When the server begins to swap its performance degrades (not a surprise). The idea is if I have few memory hungry processes running, to improve the overall system performance at that time, using SSD for swap, instead of slower rotational media. At the end - I want to be able to login faster and check the server state during swapping, instead of waiting on the login prompt. And of what I see SSD is cheaper per GB than RAM. Would I have better server performance during swapping (as rare it is) using SSD compared to HDD? Where 10k or 15k rpm HDDs would rate in this scenario? Thank you all for your quick and prompt answers!

  Read the article

• NTFS 'Owner' missing when accessing hard disk from external USB adapter

  - by trismarck

  I have a hard drive with Windows XP SP3 installed on it. When the drive is connected through the standard SATA connector inside the laptop, everything works as expected. However when I remove the drive from the laptop and connect the drive to the external USB adapter, almost all files / folders lose the 'Owner' field contents. I was wondering why could that be. I've tried two USB adapters and this happens on each. I could take the ownership of all of the files, but this would overwrite the Owner value (the Owner value that is present when the drive is accessed through standard SATA connector in the laptop). //edit: if the hard drive is used through the USB adapter, I can't access most of the files, at least until I take ownership of the files (/folders). This is how it looks like: HDD inside USB adapter: HDD inside laptop: (note the Owner column) //edit: some of the files on the first screenshot have Owner field filled up. That's because I took the ownership of those files / folders to be able to access the files on the hard drive. //edit2: also, if the hard drive is connected through USB adapter and if I've took the ownership of some files by the 'ddd' user, then if i login as a different user (lets say 'eee' user), the owner field is _still_ empty: ddd user: eee user: eee user can't access the 'ddd' folder. Both users have Administrator priviledges.

  Read the article

• Having trouble with a workaround, for booting from a usb stick, using grub and a minimal linux kernel to load usb drivers

  - by s hanley

  I'm trying to boot from a usb stick. I formatted it to fat32, and later to ext2, and installed dsl on it using unetbootin, and later the usb install guide on dsl wiki (http://www.damnsmalllinux.org/wiki/index.php/Install_to_USB_From_within_Linux). The bios doesn't have a setting for booting from usb. Grub doesn't "see" the usb drive when I use the root and find commands, explained in (http://www.damnsmalllinux.org/wiki/index.php/USB_Booting). This happens even when I set boot from floppy at the top of the boot order. However, my usb keyboard is recognised by the bios and by grub. How can it recognise the keyboard but not the usb drive? Also, the usb led does flash even before grub starts up, so surely something must be happening usb-wise? I am now following an ubuntu guide to booting from a USB stick, using a hdd-based, minimal linux kernel to supply the usb drivers. But I'm having difficulty adapting it to other OSes (slax/dsl/aptosid). I believe I have to alter the initrd.gz file to include usb drivers and then copy that file along with vmlinuz to a partition on my hdd. But, what's the grub command for the kernel line supposed to look like? From the ubuntu example it's: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper noprompt cdrom-detect/try-usb=true persistent initrd /boot/usb-boot/initrd.lz boot Should mine just be: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz cdrom-detect/try-usb=true initrd /boot/usb-boot/initrd.lz boot

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• The plugin of munin is always timed out

  - by haoX

  I want to use munin to make a graph of ttyACM0 in Linux, but munin can not create the graph. I found some information in "munin-node.log". it shows that "Service 'temperature' timed out". So I changed timeout to 60 or 120 in /munin/plugin-conf.d/munin-node, but it does not work. It's also timed out. Here is part of my code: if [ "$1" = "config" ]; then echo 'graph_title Temperature of board' echo 'graph_args --base 1000 -l 0' echo 'graph_vlabel temperature(°C)' echo 'graph_category temperature' echo 'graph_scale no' echo 'graph_info This graph shows the temperature of board' for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" ;; 2) TYPE="HDD" ;; 3) TYPE="PHY" ;; 4) TYPE="CPU" ;; 5) TYPE="Ambience" ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.label $TYPE"; fi done exit 0 fi for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $1}') ;; 2) TYPE="HDD" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $2}') ;; 3) TYPE="PHY" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $3}') ;; 4) TYPE="CPU" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $4}') ;; 5) TYPE="Ambience" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $5}') ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.value $VALUE" fi

  Read the article

• Configuring Vmware virtual machines to run under different IPs and PC specs

  - by Alex

  Right now I'm using a simple VmWare virtual machine with preinstalled Win 7. The IP is assigned automatically (it's the same as main OS IP). Is it possible to create several virtual machines that have different hardware specifications and different IP addresses? Here is what I mean regarding these issues: Specs: Certainly, you can easily change some specifications in the Settings menu (RAM size, HDD size), but what about advanced settings? For example: advanced settings for the Processor: is it AMD (2500+,4000+, etc.. ) or Intel (core 2, Pentium, etc..) Ram - is it Corsair 4 Gb 1333 Mhz or Kingston 2 x 2 Gb 866Mhz or something else? Hdd - Is it Seagate Barracuda 80 gb 5400 Rpm or is it Samsung 500Gb 7200 Rpm or some random SSD? Programs that work under a Virtual Machine shouldn't have a clue if that's a VmWare or not. IPs: Every program that's launched under main OS use the real IP: 93.56.xx.xx All programs that are launched under virtual machine A use IP 1: 74.78.xx.xx All programs that are launched under virtual machine B use IP 2: 84.159.xx.xx I believe that you have to use either VPN or Proxy to solve this problem. The Sum Up: The idea is to create 2-3 independent virtual machines with different hardware specifications and IP addresses. Programs that work under a certain Virtual Machine shouldn't have a clue if that's a VmWare or the real PC. Any ideas/tips or experience regarding configuration will be appreciated!

  Read the article

• Is it a good Idea to switch to a SSD to use less battery?

  - by Walter Maier-Murdnelch

  I am thinking of buying a SSD for my laptop, mainly for the purpose of extended operating time when running on battery. At the moment I use a Hitachi HTS545032B9A300 (320GB) (Datasheet) as main drive and a Seagate Momentus 5400.3 120GB as secondary drive. I dualboot Windows and Linux but I don't need the windows partition any longer, a 120GB SDD would be more than sufficient space-wise. Speed is not an issue for me, I make heavy use of tmpfs (ramdrive) within Linux and transfers of bigger files are mainly through some network filesystem anyways, thus a cheaper SSD should do. For the purpose of comparison I chose the OCZ Vertex Plus 120GB. Power consumption always is a big promotional thing the industry uses to make me want to buy their SSDs, some sheet on the OCZ page provides an astonishing comparison of desktop HDDS and SSDs. The numbers I got comparing my laptop HDD and their SSD were not really astonishing any longer. Hitachi 320GB HDD: Startup (W, peak, max.) 4.5 Seek (W, avg.) 1.7 Read / Write (W, avg.) 1.4 Performance idle (W, avg.) 1.3 Active idle (W, avg.) 0.8 Low power idle (W, avg.) 0.5 Standby (W, avg.) 0.2 Sleep 0.1 OCZ 120GB SSD: 1.5W active 0.3W standby I see that there are differences, but actually they don't seem that high as I though they were. And compared to the power consuption of the rest of my system I wonder if it makes a difference at all. Have I just taken the wrong look at the whole thing or may I be better off to buy another battery for my laptop?

  Read the article

• RAID-capable 3.5" SATA Drives

  - by nroam

  I recently purchased a pair of 1TB Western Digital WD1002FBYS RE3 drives for use in an external RAID enclosure. I have found that they tend to drop out of the array after a while. Thinking it was the enclosure I tried them on another one but found the same issue. So a bit of googling and I found http://www.tomshardware.com/forum/251076-32-raid-issues-western-digital-hard-disk which suggests that: "WD's "RE" (RAID Edition) HDDs support Time-Limited Error Recovery ("TLER" ): http://www.wdc.com/en/products/productcatalog.asp?language=en As a non-TLER HDD fills up with data, the error detection firmware might take too long, and the RAID controller may drop that HDD from a RAID array." So now I wonder what SATA drives have firmware which is compatible with RAID arrays (esp. RAID 1, 5, but not 0)? I have not been able to come up with the magic set of keywords to ellicit the answer from Google. However, various sites suggest that Seagate & Hitachi are in general OK. Does anyone have any generic (or even specific) guidance on how to work out if a drive's firmware may harbour code that is potentially an issue in a RAID0 setting other than stating that it must be 'enterprise' ready?

  Read the article

• Computer making strange sound when turned on, ever since power outage

  - by Dot NET

  Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

  Read the article

• Screen randomly goes blue/black/white

  - by FubsyGamer

  Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

  Read the article

• Can you help me understand my SATA/RAID options?

  - by andrz_001

  I've a gigabyte GA-M720-US3 motherboard. Recently, I noticed the following during boot: IDE channel 0 Master (none) IDE channel 0 Slave (none) IDE channel 2 Master (my hdd) IDE channel 2 Slave (my dvd drive) IDE channel 3 Master (none) IDE channel 3 Slave (none) Of course, the same information is contained in the BIOS/CMOS. The HDD is connected to the mobo via a SATA(2?) cable at the port(?) labeled SATA2_0. The DVD drive is connected by a similar cable at SATA2_1. Why doesn't the information displayed during the boot and in BIOS reflect how I plugged the cables in? I mean, why "none" for channel 0 when there is something in SATA2_0. (or is that serious naivete on my part!?) Where's Channel 1 master and slave? Since these are SATA cables and not the IDE ribbons from a time ago, why the whole master/slave declaration during boot and in BIOS? Should my BIOS reflect the fact that these are SATA cables? I mean, in BIOS, should the "Onchip SATA mode IDE" be set to RAID or AHCI instead of IDE? Any replies, answers, suggestions, links, tips will be much appreciated. Thank you in advance!

  Read the article

• What does it mean to install two OS's alongside each other?

  - by Josh

  I currently have Windows 7 installed on my PC. However, I just tried out Ubuntu via booting from a disc and I love it. I want to install it onto my HDD, but I don't want to get rid of Windows 7. I know HOW to do this, but I am a little unsure what the consequences might be. What does it mean to install Ubuntu alongside Windows? Do they share the same resources? Also, I have my HDD already partitioned into two sections, a 70 GB section where Windows is installed and then another 400 GB section where all my data is stored. There is currently 26 GB free on the 70GB partition. I know Ubuntu doesn't take up much space. However, if I install Ubuntu in that space, will I still be able to install programs on Windows in the future? My main concern is that I am going to short-change my hard drive space for future installations. EDIT: I guess another big question I have is if I install a program on one OS, will the other be able to use it?

  Read the article

• Looking for advice on using dd to backup a dual boot laptop.

  - by AvatarOfChronos

  My questions boils down to this. If I do "dd if=/dev/sda of=usbdrive" can anybody confirm that this will get everything including mbr/partition information/all four partitions and create a drive that I can swap with the failing internal drive without losing anything? If this is done while the computer is running will it still copy everything? At this point I'm afraid to shutdown the computer for fear of it never starting again. Secondly, how tolerant is dd of failing drives? Has anybody used it to recover a half dead drive before that can share any potential pitfalls? Did it get the data ok or is this going to be a hope for the best kind of situation? And lastly, If the usbdrive is larger than the failing internal drive I'll still be able to expand the partitions later so I'm not losing space? this last part seems silly to ask but with my current streak of bad luck I'll end up overwriting some magic bit and forever turning a 640gb hdd into a 500gb hdd. Also if anybody has a better solution to create a complete clone that gets everything I'm all for hearing about it. PostScript: I had been making periodic backups however when whatever miasma that killed the laptop struck it also got the NAS :( Post PostScript: both devices were on a UPS system.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

  - by prayingpantis

  So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

  Read the article

• Can I clone my hard drive to an external and boot from the clone?

  - by willbuntu

  First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

  Read the article

• Windows won't boot after moving house. How do I solve this?

  - by James

  Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

  Read the article

• How to fix Truecrypt MBR using Command Prompt or Linux live USB?

  - by Michal Stefanow

  I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

  Read the article

• Connect USB hard drive to wireless router on RJ45 port? Possible?

  - by lawphotog

  just a quick story behind. I was trying to set up wireless networked hard drive at home. My wireless router doesn't take USB. I am considering few options. First i was considering to get something like WD My Cloud. My router is an old one provided by service provider. It only has 10/100 Ethernet. WD My Cloud has Gigabit interface. So unless i changed a new router, data transfer will be slow. So upgrading the router is a must if i want fast transfer speed. Plus I already own an external hard drive with USB 3.0 interface. So if I get a router like Netgear D6300, i can get a decent speed wireless shared drive at home. And i can use my existing HDD instead of WD My Cloud. But the router isn't cheap so I am saving up for that. In the meantime I found out the existence of USB to RJ45 adaptor. I read the reviews and some say it works for them and for some don't. They didn't really say what they were trying to do so I'm confused. So if i bought an adaptor like this, can i connect my existing HDD (USB) with my existing router (RJ45) and use it as a shared drive for data transfer? I know it will be slow as the adaptor will only have USB 2.0 and 10/100 for Ethernet. But it's fine as it's for temporary until i got my new router.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >