Search Results

Search found 2484 results on 100 pages for 'hp pavillion'.

Page 46/100 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Recommendations for a JetDirect print server for USB 2.0 printers?

  - by eleven81

  I have been using some older HP JetDirect 300x print servers for a variety of parallel printers over the years. These things work great for every printer I have tried them with, including HP's, Dell's, and even a Mountbatten braille embosser! These have been a boon for printers whose internal network cards fail, but whose parallel ports continue working. I don't have to throw away the $500 printer that is one year and a week old, and can keep using it for many, many years. Now that very few printers are coming with parallel ports, but are coming solely with USB connections and network cards. When the network card fails but the printer is still usable, I want to continue using it on the network with a JetDirect card. In summary: Does anyone have any recommendations for JetDirect cards that will work as well with USB 2.0 printers of unspecified manufacturer that my old JetDirect 300x cards do?

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• Isass.exe Application error

  - by shelbang

  I own a hp mini. It has come up with a blue screen and says: The Application failed to intialize properly (0xc0000005). Click on OK to terminate the application. i click on it twice but it stayed on the blank blue screen. i have tryed going on the safe mode thingy.. and pressing F9 and F10 and F8 but none of the above work. Considering its a HP mini- it doesnt have a cd rom compartment!?!? pleasee help !! i cant live without my computer! ): - ps using sisters computer atm :S shhh

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• No sound through DisplayPort

  - by Chris Koknat

  I'm trying to connect my Elitebook 8440p laptop to my Samsung HDTV. The laptop does not have a HDMI connection, but it does have DisplayPort. I bought a DisplayPort-to-HDMI adapter here http://www.amazon.com/gp/product/B002CSRFD8/ref=oss_product, and connected it with a 3' HDMI cable. The video shows up fine, but there is no audio. DisplayPort, HDMI, and the adapter all support audio. I contacted HP tech support, who told me to update my sound drivers. I installed the driver and rebooted. Supposedly, I should see a "HD Audio" tab. No luck, even after installing the driver again and rebooting. HP closed the case. I'm using XP Pro.

  Read the article

• Lost USB BlueTooth Dongle for Keyboard and Mouse

  - by Tyndall

  I lost my USB bluetooth dongle (from HP) which I used for a wireless keyboard and mouse. They came together in a set when I bought my last HP computer. Are the keyboard and mouse useless now? or will any bluetooth dongle allow them to work? If I can just buy a new one - any recommendations on a replacement (good price, and perhaps works with Windows and Ubuntu out-of-the-box? Forgive me if this is an easy question. I'm just not that familiar with wireless mice/keyboards.

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• Synergy 1.3.6 on Windows 7 Test not working

  - by Joel Avery

  So I have the client running, says perfectly connected to server when I run a test I run the same test on the server and it just says "running test. press stop to end test" and no output log file comes up like on the client. Then I stop the test it says synergy is about to quot with errors and warnings. Please check the log then click OK. Except for the log didnt come up and I don't know how to access the log from command prompt. And I'm pretty sure my thing is set up correct: section: links Joel-HP: left = JoelPC2 JoelPC2: right = Joel-HP end My Windows 7 64 bit server is on the right, Windows 7 32 bit client on left Both client and server are run as admin.

  Read the article

• How can I create a pen drive that I can boot from, and then install Win98 from?

  - by rossmcm

  I have a HP Compaq t5515 thin client computer with a flash disk and USB port. I want to put Win98 onto it, replacing whatever is on there now (I think it is some Linux-based thing). I can find stuff about putting Win98 onto a pen drive and running from that, but I can't find any info about installing Windows 98 from a pen drive onto a sep[arate system. Is it just a matter of making the pen drive bootable to DOS copying the contents of a Win98 installation CD onto the pen drive booting the HP machine from the pen drive running SETUP.EXE from the pen drive? Any pointers appreciated. TIA

  Read the article

• windows 2000 freezing during large disk write

  - by robert

  We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. thanks, Gwen.

  Read the article

• Ubuntu karmic 9.10 Live image on USB - not working.

  - by Vivek Sharma

  This is my configuration 4GB pendrive, HP ubuntu-9.10-desktop-i386 image file for live USB install pendrivelinux (u910p) and ubetbootin (unetbootin.sourceforge.net) machine T61 Earlier I have installed ubuntu live image using above two mentioned utilities, numerous times. But, on a 2gb kingston flash-drive. Today, i am trying to install the live-image on 4gb HP flash-drive. Both the utilities install, i can see the files in the drive, even the wubi-installer is working, it say press "reboot" to boot in live-ubuntu. But, when i press "reboot" it does not reboot my win7. Now, when i reboot, select boot-usb in bios, it say "no boot record". I am making my usb bootable, using the utility, even then nothing is working out. Did this a few times. Is 4GB usb a prob, does anyone knows how to partition my usb in 2-2gb and install it on one partition, and then use the live image. Is it possible.

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• backup and file server for 50+ TB of data

  - by a-bomb

  our office wants to build a new server to handle our data, over the last 10 years our data was stored on CDs, DVDs, HDDs but now they want all of it in one place that is attached to the network for everybody in the office to access it. the data is 20TB new data and the rest is old, the important now is to store these 20tb and gradually store the other 30tb over time. so what is the best solution to do ? we thought of getting an hp server and connect it to an external enclosure that either had tape drives or HDDs (we haven;t decided yet) or to get a NAS server and connect it to the hp server. what should we do because this is new for us ...

  Read the article

• Can I use dis-similar HW for Win2008r2 DFS-R

  - by cwheeler33

  The setup: Windows 2008R2 Ent on two machines. The roles on each server will include File Servers and DC's. The machines come from two different vendors (Dell/HP) The Dell is an Athlon and the HP is an Intel. Both have roughly the same speed CPU and 8GB of RAM. They have different Raid controllers, and more or less the same amount of disk space (roughly 6TB.) Can the servers use different types of hardware? Is there any documentation about this? The last question I have is about the network. Can DFS-R be forced to use a differen subnet from the regular network?

  Read the article

• Window 7 not recognizing printer for driver (re)installation

  - by user55406

  OK I am having this printer problem. I had a user delete her printer. Please don't ask, I don't know. She is using an HP deskjet 6940 printer, and for her desktop she has an HP dx2400, with Windows 7. When I plug in the USB cable it should install the new drivers, but it does not. I believe you guys don't need to know my network setup. I could be wrong. If you guys here at serverfault could help that will be great. :)

  Read the article

• Where can I find a good, tab-less privacy filter for my monitor?

  - by KeyStroke

  Hi, I have an ASUS laptop with a 14" monitor (12" by 7" to be more specific), and I've been looking for a decent privacy filter that I can use with for, yet I couldn't find any. The problem with the filters I've found is that they all use those ugly "tabs" that you have to stick on the sides of your monitor in order to slip the filter in. I'm looking for ones that are like HP privacy filter, where parts of it goes under the frame of the monitor to hold it in place. Too bad HP doesn't sell filters that fit my screen. So, any idea where I can get a good privacy filter? Your help is so much appreciated

  Read the article

• Portable Display doesn't work anymore

  - by RipCord

  My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

  Read the article

• Hardware question re Hauppauge WinTV-HVR 900 HD video/tv capture unit used with laptop with HDMI output laptop HDMI connection

  - by Bill

  I've ordered a Hauppauge WinTV-HVR 900 HD video/tv capture unit. It is mainly for use with my HP desktop running Windows 7 Professional, but I will want to use it occasionally with my partner's HP laptop running Vista Home Premium. The latter has an HDMI output which works perfectly with my LG 42" LCD TV, enabling display of BBC iPlayer and other catchup services. Will the live or recorded HD signal from the WinTV-HVR 900 HD connected to the laptop's USB input be output on the laptop's HDMI socket as HD? Come to that, will SD content be output? The reason I ask is that I had a problem with a Pinnacle unit which displayed OK on the laptop's screen but not on the TV screen (which did display all the normal Windows material). I've tried the Hauppage website, but it doesn't even acknowledge the existence of the WinTV-HVR 900 HD!

  Read the article

• Why Windows Media Center (Vista 32-bit) unable to record TV Series?

  - by Alex R

  I can record individual shows just fine, but trying to setup the recording of a Series throws an error (something like, "unable to schedule, try restarting Media Center", pops up in the bottom right of the screen). Trying to access the "Other Showings" menu causes Media Center to crash ("check for a solution online" dialog comes up). The machine is a fresh reinstall of 32-bit Windows Vista from the HP recovery CDs, plus all Microsoft updates and service packs. Hardware: HP s3220n, AMD X2 5000+, 2GB RAM, 300GB free space on disk. Media Center came bundled. The "Media Center update for Vista" failed to install (it says, not appropriate for my computer). Any ideas? Thanks

  Read the article

• How to increase the volume gain when viewing online flash video?

  - by Nick000

  When watching online Flash videos on Youtube, Dailymotion, etc... sometimes the videos are recorded at low volume. The thing is that, I have a HP Notebook with good enough audio volume, but when I watch these "low volume" videos the sound level is really low, even when I have the volume at 100%. So I am looking for a way to increase the volume gain (like VLC player where you can increase it to 200%), BUT while watching it live on Youtube... that is, I don't want to download the video on my PC. Is there a software that can do that? Maybe an advanced flash video player that integrates to browser? or some other software to increase the volume gain overall on my laptop? My Specs: HP Pavilion Notebook, Audio: IDT High Definition Audio CODEC (integrated), Vista 64-bit, 4 GB RAM, etc.....

  Read the article

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• Unable to read DVD on laptop

  - by usabilitest

  I have a DVD disk that I created on an HP laptop. I believe it was setup to be accessed as a USB device. I do not have that laptop any longer and I still would like to access the files on that DVD from my current DELL laptop but it can not open the disk. My guess, the session nwas not closed on the disk and for some reason the new laptop can not read it. My question is, is there any way I can access the files using new laptop, of do I need to find similar HP to try to access the files and possibly close the session? Are there any utilities out there that could help me? Thanks.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >