Search Results

Search found 2040 results on 82 pages for 'jason zhao'.

Page 46/82 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• How do I add a counter for process data in perfmon.exe for a process that isn't currently running?

  - by Jason Jones

  I would like to perform an ad hoc capture of data using perfmon.exe for a process that runs during the night. I know the name of the executable--lets call it Foo.exe. If the process were currently running, I would go to the Add Counters dialog in perfmon, switch to the Process object, and select the Foo instance from the list. However, it's not currently running. Is it possible to set up perfmon so that it will capture process data for this process when it starts, and if so, how would I configure it to do so?

  Read the article

• Server 2008 SP1 VSS Writers Not Responding

  - by Jason

  I've got a Windows Server 08 box on SP1 that is having some problems. We've experienced backup problems and I've traced it down to VSS Writers not responding. From the command line, if I type vssadmin list providers, I get Provider name: 'Microsoft Software Shadow Copy provider 1.0' Provider type: System Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5} Version: 1.0.0.7 If I type vssadmin list writers, I get this vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2005 Microsoft Corp. Waiting for responses. These may be delayed if a shadow copy is being prepared. I could wait this out for hours and it won't move. I looked up how Server 2008 handles VSS writers, and you can't reregister them like you could in Server 2003 http://social.technet.microsoft.com/Forums/en/windowsserver2008r2general/thread/062cc52c-899b-45f3-8d0c-798b92363f41 Does anyone know how to fix something like this or where to turn next?

  Read the article

• In a Virtual Machine, is the Virtual Processor using RAM or part of the Processor?

  - by Jason H

  I am running a 15" MacBook Pro (2.66GHz) and 4GB of RAM. I am considering downgrading to a 13 MacBook Pro (2.4GHz) with 8GB of RAM. Most of what I do at work is through Windows and I need to run it virtually. So my real question is when running a virtual machine will the virtual processor be utilizing RAM or part of the hosts processor? My assumption is that it will utilize the allocated RAM but I have seen zero documentation to support that.

  Read the article

• cd Command Linux and Mystery Flags

  - by Jason R. Mick

  Platform: CentOS 6.2 Shell:tcsh I'm playing around with cd for a BASH script, and noticed the wondrous cd - option, but was left with many questions... Why the cd -? Isn't this redundant with cd ..? EDIT [As FatalError points out, these two commands don't do the same things... so the answer is "no"] Can you delve farther back into your history with - flag, a la in a browser? e.g. When I type cd -, it takes me to my previous directory, but then if I enter that command again, it takes me to the directory I just came from, creating a sort of loop. Is a shorthand for going back multiple levels supported?EDITI realize I can go back with cd .., but was hoping this could be a gateway to a less verbose deep back, e.g. cd -3 vs. cd ../../../ ... hopefully that clarifies what I'm asking....EDIT2As to the current feedback, while .. is a special directory, I don't see a reason why the built-in cd to the terminal couldn't use a shorthand for ../../ ... ../ e.g. cd ..5 or why the built-in also couldn't have a history (a la auto pushd/popd) that could be turned on and used like cd -3. I get that this could be somewhat of security/privacy risk, but I don't see how it's any worst than storing a command history, which most shells/terminals do. The manpage for cd, accessible via man cd and help cd (it's the same for either command), only lists -L and -P flags. However when I type in cd --help it outputs Usage: cd [-plvn][-|<dir>].. Am I right in assuming the other flags and the - (back) option are nonstandard? What are the -n and -v flags for? Both seem to take me back to my home directory, that's all I've been able to figure out via experimentation. A quick read on web resources [1][2] offered just the same sort of info that the man page did and didn't answer my questions. Note: The second Linux-centric resource above claimed cd only had two options (obviously not true in current CentOS) hence my assumption that this functionality could be non-standard.

  Read the article

• Alternative to DVD Player on Mac OS X

  - by Jason S

  DVD Player is probably the program I use that crashes the most. Are there any alternatives?

  Read the article

• Does installing windows format the hard disk?

  - by Jason

  My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• Wordpress serving PHP but not CSS or JS

  - by Jason

  I'm trying to set up an Amazon EC2 instance to run a Django app and a WP instance side by side, differing only by the incoming URL. Initially, accessing the site via mysite.com/wordpress worked, but I also needed to catch the incoming requests from a subdomain address blog.mysite.com. To do that, I created a default file in /etc/apache2/sites-enabled and included two virtualhost directives, one of which was <VirtualHost *:80> ServerName www.blog.mysite.com <Directory /var/www/wordpress> Order deny,allow Allow from all </Directory> </VirtualHost> This created some errors with the other virtualhost, so I restored the default 000-default file configuration and restarted. Now, accessing mysite.com/wordpress takes forever, and even then the CSS and JS files are not loading. Iside the Firebug Net tab, I can see the HTML response, but the CSS and JS files are not loading at all. What happened here?

  Read the article

• Photoshop changes colors when moved to a different monitor

  - by Jason

  This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

  Read the article

• Linux File Permissions & Access Control Query

  - by Jason

  Hi, Lets say I am user: bob & group: users. There is this file: -rw----r-- 1 root users 4 May 8 22:34 testfile First question, why can't bob read the file as it's readable by others? Is it simply that if you are denied by group, then you are auto-blacklisted for others? I always assumed that the final 3 bits too precedence over user/group permission bits, guess I was wrong... Second question, how is this implemented? I suppose it's linked to the first query, but how does this work in relation to Access Control, is it related to how ACLs work / are queried? Just trying to understand how these 9 permission bits are actually implemented/used in Linux. Thanks alot.

  Read the article

• Directory "Bookmarking" in Linux

  - by Jason R. Mick

  Aside from aliasing and links, is there an easy way in Linux to tag commonly used directories and to navigate to a commonly used directory from the terminal. To be clear the disadvantages I see with alternative approaches, and why I want a bookmark/favorites like system: alias Cons: Too specific (every new favorite requires a new alias...although you could in theory make an alias that echo append your dir as a new alias, which would be sort of clever). Can't nest favorites in folders (can't think of a simple solution to this outside of heavy config scripting). links Cons: Clutter directory make ls a headache. pushd/popd Cons: Non-permanent (without shell config file scripting), can't nest favorites in directories, etc. Granted I have multiple ideas for making my own non-standard solution, but before I have at it I wanted to get some perspective on what's out there and if there is nothing, what is a recommended approach. Does anyone know of such a favorites/bookmark-like terminal solution?

  Read the article

• Replacing hard drives in a LaCie 2big Network

  - by Jason

  I have a LaCie 2big Network that currently has 2 500GB drives in it (mirror). I'd like to upgrade the drives to 1TB each using something like this I know that Lacie sells a 1TB drive designed for the 2big Network but it would seem to me that these drives are standard drives with the Lacie holder included. Do I need to use their drives or can I get my own? (Their customer support pushes me towards their drives) I'm assuming the device can format the drives for me when I add them in.

  Read the article

• SVN Active Directory authentication with ProxyPass redirect in the mix

  - by Jason B. Standing

  We have a BitNami SVN stack running on a Windows machine which holds our SVN repository. It's set up to authenticate against our AD server and uses authz to control rights. Everything works perfectly if Tortoise points at http://[machine name]/svn However - we need to be able to access it from http://[domain]/svn. The domain name points to a linux environment that we're decommissioning, but until we do, other systems on that box prevent us from just re-pointing the domain record. Currently, we've got a ProxyPass record on the linux machine to forward requests through to http://[machine name]/svn - it seems to work fine, and the endpoint machine asks for credentials, then authenticates: but when that happens, the access attempt is logged as coming from the linux box, rather than from the user who has authenticated. It's almost like some element of the credentials aren't being passed through to the endpoint machine. Has anyone done this before, or is there other info I can give to try to make sense of this problem, and figure out a way to solve it? Thankyou!

  Read the article

• Sunbelt Firewall 4.5 won't block Firefox

  - by Jason

  I blocked Firefox with Sunbelt Personal Firewall v.4.5 (formerly Kerio Firewall), by placing red X's on the four in/out points in the configutation. I noticed that the posted text messages on the Nascar Live Racecast on EPSN are still updating. I then blocked svchost.exe (out-Trusted), the only other thing enabled that's relevant, and the messages are still updating. (The only other thing allowed is completely unrelated, it's an independant application doing something else, and I don't want to kill that right now, or do a 'disable all traffic' in Sunbelt until it's done.) Anybody heard of Sunbelt Firewall having such a huge, obvious hole? Is there something else that needs set?

  Read the article

• I recently converted my ex HDD from FAT32 to NTFS. now my pc doesn't find or pick up my NTFS HDD

  - by Jason Haniball

  I recently converted my external hard drive from FAT32 to NTFS using the Command Prompt. Everything was working fine, I copied a 7GB file to it and everything worked. The next day I switched on my PC, I couldn't and still can't find my external 1.5TB hard drive by my computer. I have about 500 to 800 GB of data on it that I really don't want to lose. Its a Iomega Seagate Freeagent HDD. Has no switch, it switched on automatically, don't know if that helps.

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Should UNIX users have the same group

  - by jason

  I have a web server (Ubuntu 12.04 LTS if needed) multiple people use with Apache, PHP5, and MySQL installed. All users have access to SSH. All users home directory's are /home/USER I was wondering: What usergroup should users be in; or should they have their own usergroups()? What user and group should Apache run under? What file permissions should the users /home/USER/public_html and /home/USER directory's be, as well as subsequent files (including such PHP files w/ sensitive information such as DB passwords) Thanks :)

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Oracle open office

  - by Jason S

  What's the difference between the free OpenOffice and the non-free Oracle Open Office? The name collision is kind of confusing.

  Read the article

• Gmail Embed Image Icon

  - by Jason M

  I'm using the Gmail labs feature that allows me to embed images into emails. The feature works fine and when I send the email, I believe it actually does embed the image and the recipient sees it as such. But when I look in my sent box and bring up the email, instead of the embedded image, I see an icon in its place. Is this correct? Why is this like this? I want to be able to see the embedded image just like when the email was composed.

  Read the article

• Windows DIR listing switch to exclude files in hidden folders

  - by Jason

  I'm trying to get a list of files from a directory excluding files in hidden folders. With the following command, hidden folders are traversed even though I've set /A:-H to exclude hidden directories. Is there a different switch to stop them from being traversed too? dir "C:\SVN" /A:-H /w /b /s Alternatively, for this use case I know the name of the hidden folders I want to exclude, so if there is a way to exclude the folders by name ("\.svn\") that might have to suffice. Thanks!

  Read the article

• PATH env variable on Mac OS X and/or Eclipse

  - by Jason S

  When I print out the path in bash, it prints this: /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin When I run System.out.println(System.getenv("PATH")); in Java running under Eclipse, it prints /usr/bin:/bin:/usr/sbin:/sbin How can I figure out why there is this discrepancy? I need to add /usr/local/bin to the PATH and make it available to Java apps under Eclipse. (note: I have made no modifications system paths, so these are the defaults set by the OS or perhaps by one or more of the applications i've installed.)

  Read the article

• Dynamically changing one-node Cassandra cluster to two nodes

  - by Jason Axelson

  So I have an application that will be very dormant most of the time but will need high-bursting a few days out of the month. Since we are deploying on EC2 I would like to keep only one Cassandra server up most of the time and then on burst days I want to bring one more server up (with more RAM and CPU than the first) to help serve the load. What is the best way to do this? Should I take a different approach? Some notes about what I plan to do: Bring the node up and repair it immediately After the burst time is over decommission the powerful node Use the always-on server as the seed node My main question is how to get the nodes to share all the data since I want a replication factor of 2 (so both nodes have all the data) but that won't work while there is only one server. Should I bring up 2 extra servers instead of just one?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >