Search Results

Search found 2488 results on 100 pages for 'listen'.

Page 46/100 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Httpd restart "Address already in use" error

  - by mtndesign

  I have an .rpm, which I created. In its %post part, I do some stuff, and in the end of this script, i call service httpd restart. It gives the following error: + service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:81 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:81 no listening sockets available, shutting down Unable to open logs [FAILED] I got this from the rpm verbose installing (-vv). So I know its about httpd restart itself, nothing else. The according to netstat only one process (httpd) is listening on port 81. $ sudo netstat -nlp | grep 81 tcp 0 0 :::81 :::* LISTEN 29670/httpd I don't understand, why running http FAILS at stop, and FAILS again in start. Any ideas how to solve this?

  Read the article

• .bat file overriding answer

  - by John Peters

  When I made this batch file, when typing y and n for the first time it works fine, but as soon as I choose n, every single time I try inputting something, it opens up the 7000 songs wpl list then closes it and replaces it with Rick Astley... HELP! @echo off :Ask echo Would you like to listen to the best songs out of the 7000 I have?(Y/N) set INPUT= set /P INPUT=Type input: %=% If /I "%INPUT%"=="y" goto yes If /I "%INPUT%"=="n" goto lolno echo Incorrect input & goto Ask :yes start c:/Users/MyName/Music/Playlists/"The Best of the 7000 songs that I have.wpl" :lolno start c:/Users/MyName/Music/Downloads/Music/"Various Artists"/"The Number One 80's Album Disc 2"/"06 Never Gonna Give You Up.mp3"

  Read the article

• SPAN/Port mirroring on Linksys switch

  - by Bastien974

  Hi all, I'm trying to deploy a Snort box in my LAN. I have a Linksys SRW248G4 and trying to configure Port mirroring so that Snort can listen everything on the network in promiscuous mode. So in ADMIN / Port Mirroring, I have 3 things: Source Port (e1,...e48, g1...g4) Type (Rx, Tx, Both) Target (e1...e48, g1...g4) Last time I played with it, I killed all traffic on the switch, I had to reboot it several times... so now I'm asking question before: Do I need to configure each Source Port (from 1 to 48) to forward to the single promiscuous port ? 48 rules !? Is that correct ? Thanks !

  Read the article

• Why am I unable to turn off recursion in ISC BIND?

  - by nbolton

  Here's my named.conf.options file: options { directory "/var/cache/bind"; dnssec-enable yes; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; # disable recursion recursion no; }; I've tried adding allow-recursion { "none"; } before recursion but this also has no effect; I'm testing it by using nslookup on Windows, and using google.com. as the query (and it returns an IP, so I assume recursion is on). This issue occurs on two servers with similar setups.

  Read the article

• Remove all HTTP bindings from an IIS 6 site while leaving SSL bindings

  - by MikeBaz

  We have a (remote, via a reseller) customer who configured their IIS6 server to not have any port 80 HTTP bindings, only port 443 SSL bindings. We would like to reproduce this without going through the three layers (!) to get to the customer to test some error scenerios. However, whenever I try to get IIS to not listen on IIS at all, I can't do it. If I do it in the UI, either leaving in the main properties page, or in the advanced bindings page, the UI does not let me proceed. If I remove the HTTP ServerBindings from the metabase.xml directly, IIS makes it port 80, all unassigned addresses anyway. Is there a way to get to the "SSL only" state naturally? Please note I am NOT talking about the "require SSL" checkbox or underlying metabase setting, as that still listens on port 80 (or whatever) to give the "SSL required" error message. I'm talking about not having any bindings listed at all for HTTP.

  Read the article

• With dnsmasq as the DNS server, 'dig' and 'ping' succeed while 'nslookup' fails

  - by einpoklum

  I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, if I dig mymachine, I get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging (Edit:) succeeds. This happens both on the server machine itself and on other machines on the network. How can I the DNS lookups to work? What problem is preventing nslookup from succeeding? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird; but I also tried: hosts: files dns instead, with the same effect) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Relevant netstat output on the server: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 192.168.0.1:53 0.0.0.0:* LISTEN Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

  Read the article

• how to change port number of Apache server in windows OS

  - by jesop

  I have installed xampp control panel and Apache 2.2 on windows XP when I type http://localhost/ gives me page which says It Works! Now, I want to change the port number 80 to some other number How to change it ? in how many files does it needs to be changed ? dose it require to restart the system to change to take effect ? Note: I have changed port number in C:\xampp\apache\conf\httpd.conf in two places where it says Listen 80 and ServerName localhost:80 Pls help, thanks.

  Read the article

• Can I optimize this mod_wsgi / apache file better?

  - by tomwolber

  Hi! I am new to Django/Python/ mod_wsgi, and I was wondering if I could optimize this file to reduce memory usage: ServerRoot "/home/<foo>/webapps/django_wsgi/apache2" LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule wsgi_module modules/mod_wsgi.so LogFormat "%{X-Forwarded-For}i %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined CustomLog /home/<foo>/logs/user/access_django_wsgi.log combined ErrorLog /home/<foo>/logs/user/error_django_wsgi.log KeepAlive Off Listen 12345 MaxSpareThreads 3 MinSpareThreads 1 MaxClients 5 MaxRequestsPerChild 300 ServerLimit 4 HostnameLookups Off SetEnvIf X-Forwarded-SSL on HTTPS=1 ThreadsPerChild 5 WSGIDaemonProcess django_wsgi processes=5 python-path=/home/<foo>/webapps/django_wsgi:/home/<foo>/webapps/django_wsgi/lib/python2.6 threads=1 WSGIPythonPath /home/<foo>/webapps/django_wsgi:/home/<foo>/webapps/django_wsgi/lib/python2.6 WSGIScriptAlias /auctions /home/<foo>/webapps/django_wsgi/auctions.wsgi WSGIScriptAlias /achievers /home/<foo>/webapps/django_wsgi/achievers.wsgi

  Read the article

• mail server administration

  - by kibs

  MY postfix does not show that it is listening to the smtp daemon getting mesaage below: The message WAS NOT relayed Reporting-MTA: dns; mail.mak.ac.ug Received-From-MTA: smtp; mail.mak.ac.ug ([127.0.0.1]) Arrival-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Original-Recipient: rfc822;[email protected] Final-Recipient: rfc822;[email protected] Action: failed Status: 5.4.0 Remote-MTA: dns; 127.0.0.1 Diagnostic-Code: smtp; 554 5.4.0 Error: too many hops Last-Attempt-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Final-Log-ID: 23434-08/A38QHg8z+0r7 undeliverable mail MTA BLOCKED OUTPUT FROM lsof -i tcp:25 command master 3014 root 12u IPv4 9429 TCP *:smtp (LISTEN) (Postfix as a user is missing )

  Read the article

• Serving static files fails - nginx

  - by Sergei

  Hi, I've been looking and trying around all night, but without success. I configured nginx to serve my static files and proxy all the other traffic: server { listen 80; server_name mydomain.com; access_log /home/boudewijn/www/bbt/brouwers/logs/access.log; error_log /home/boudewijn/www/bbt/brouwers/logs/error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/boudewijn/www/bbt/brouwers/; } } The proxy passing is no problem, but when I go to mydomain.com/media/ or try to access any testfile over there, it's without success. I paid attention to the difference between root and alias, my media folder exists, I paid attention to the trailing slashes, but still I get a 404 when trying to access my static media files. Any help?

  Read the article

• collectd:Monitoring server not showing clients

  - by Quintin Par

  I have setup a monitoring server with the following setup. <Plugin network> Listen "0.0.0.0" "25826" </Plugin> Now my clients are sending data to the monitoring server(verified through tcpdump). Even the collection folder shows that the data is being dumped /var/lib/collectd/rrd [ec2-user at x rrd]$ ll total 4 drwxr-xr-x 11 root root 4096 Nov 20 17:53 x-web-1.y.com [ec2-user at x rrd]$ I have also verified with find . -mmin 1 to see if its being constantly updated. [ec2-user@x rrd]$ find . -mmin 1 ./x-web-1.y.com/interface-eth0/if_errors.rrd ./x-web-1.y.com/interface-eth0/if_packets.rrd ./x-web-1.y.com/interface-eth0/if_octets.rrd ./x-web-1.y.com/disk-xvda1/disk_time.rrd ./x-web-1.y.com/disk-xvda1/disk_ops.rrd ./x-web-1.y.com/disk-xvda1/disk_octets.rrd ./x-web-1.y.com/disk-xvda1/disk_merged.rrd But when i look it up through collectd-web, I don't see the clients What might be wrong in my setup?

  Read the article

• Office jukebox systems

  - by jonayoung

  We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

  Read the article

• Bind "media" keys on MacBook keyboard to application menu items

  - by Austin

  Currently, I am using PandoraBoy to listen to my Pandora stations. In the preferences, it allows you to set global hotkeys to control playing, like/dislike, volume, stations, etc. What I would like to do is allow the built-in media keys on my MacBook Pro's keyboard (F7-F12: Previous, Play/Pause, Next, Mute, Volume Up, Volume Down) to control PandoraBoy like they do iTunes. Right now, I am using Command-F(7-12) to control it, but that requires me to hold down the "fn" and command keys Is there a way to bind these commands to the media keys without needing to function-shift them?

  Read the article

• Very Large number of connections in TIME_WAIT state; Server is slow, ipconntrac

  - by Sparsh Gupta

  I have a nginx server with load balancing and reverse proxy. Right now its behing another nginx but very soon I plan to make it front, where it will receive TCP connections from clients directly at a rate of 500req/second I am having some big troubles with the server. I have pasted my configurations here and I am kinda sure that the problem is with ipconntrac and similar things which are alient to me http://paste.org/pastebin/view/28543 root@load_balancer:/proc/sys/net/ipv4# netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 67 CLOSING 727 ESTABLISHED 173 FIN_WAIT1 183 FIN_WAIT2 19 LAST_ACK 5 LISTEN 447 SYN_RECV 1 SYN_SENT 27970 TIME_WAIT Its a ubuntu machine with mainly nginx (load balancer and reverse proxy) installed. It surely isnt great. Can you help me understand whats going on and how can I fix it. This is my live server and I am sure its in a bad shape right now. Any document or commands to fix this, or settings I should make to make this better and reduce time wait and fin_wait1/2 better would be awesome.

  Read the article

• Terminal command to send data (plain text string) to a port at a remote computer.

  - by Eddy

  I am trying to send data (plain text string) to a port at a remote computer using terminal utility. The string would be used to trigger something on the remote computer running a program that would listen to that specific port. I used netcat command and tried a few combination of the following but can't seem to get the parameter right. Can someone point me out where am I doing wrong? eddy-2:Desktop eddy$ nc IPADDRESS PORT woc.txt eddy-2:Desktop eddy$ nc IPADDRESS PORT < woc.txt P.S: woc.txt contains plain text string of the said command. Edit: I am trying to send a string from OSX to Windows XP where the specific port is open by default.

  Read the article

• Why does some of the songs in my iTunes library stop prematurely and go to the next song?

  - by joshhunt

  For the couple of weeks a whole bunch of the songs from my iTunes library stop early and skip to the next song (just as if it was at the end of the song). Although the point where it skips varies for each song (for one song it is 2:32, another is 2:46), it will always skip at the same point for each song. A while back I ran BPMer and, although it crashed half way through, it did not appear to corrupt my music the way it is now. A few days ago I backed up my iTunes library and reformatted my hard drive (for a completely unrelated issue) and reinstalled OS X from scratch. The problem was happening before and after the reinstall. This problem also persists when the music is synced across to my iPod touch running 3.0. Listening to the same troublesome songs in my iPod causes them to end prematurely. However, I can listen to the whole song using Quicklook, so the problem must be with my iTunes library or something.

  Read the article

• What is the "right" way to host CUPS behind Apache 2

  - by Greymeister

  I have tried some combinations of ProxyPass, ProxyPassReverse and ProxyHTMLURLMap but I'm still not having much luck. I just would like to be able to hit the printers in CUPS by going to www.printerhost.com/printers/printername rather than having to add a port 631 or have CUPS listen on port 80. As requested, here is the configuration file: LoadModule proxy_html_module modules/mod_proxy_html.so LoadModule xml2enc_module modules/mod_xml2enc.so NameVirtualHost *:80 <VirtualHost *:80> ServerName blah.yours.com JkMount /* balancer JkMount /jkmanager jk-status JkUnMount /cups* balancer ProxyRequests Off ProxyPass /cups/ http://localhost:631/ ProxyHTMLURLMap http://localhost:631 /cups <Location /cups/> ProxyPassReverse / ProxyHTMLEnable On ProxyHTMLURLMap / /cups/ </Location> </VirtualHost>

  Read the article

• How can you test communication on a COM/Serial port?

  - by Andy

  We have a OHAUAS Weighting scales with a COM port. if we connect this to a PC we should be able to get the weight on the computer by sending a command to it. Is there a way to test this? i tried the command line echo "LP" com1 but this does nothing. A small C# application that listens to this port seems to be continuously receive Hexadecimal numbers (2 digits then an enter), however sending a command through this application doesn't give readable results. When i do listen on the port though, the echo "LP" com1 command gives an unavaible error, so sending the command works in cmd. Does anyone have any knowledge on a simple way to test a send and receive on a com port?

  Read the article

• Changing Servers - Redirect to new IP = No Downtime?

  - by Denis Pshenov

  I am changing servers of my website. The IP of old server cannot be moved to the new one. To have no downtime I am planing to do the following, please someone confirm it will work: Setup the new server and listen on the new IP Old server redirect all traffic to the new IP Change DNS records to point to the new IP My logic tells me that when I redirect to the new IP from my old box, the user will not see the domain name in the browser but will see the new IP. Is there a way to redirect to the new IP and send along the HOSTNAME with it so that the user will see the domain name in the browser? Im doing this because the site is in constant use and simply changing DNS settings won't do as database won't be synced between the new and old servers during propagation.

  Read the article

• How to set up Windows server 2008 to receive email?

  - by Saul

  First off apologies, I'm from a medical background not a networking one, but I've got roped into setting up a windows 2008 server. So far web server running, fixed IP address assigned (within a large private network of the National Health Service in the UK if that makes any difference) and the network team have assigned a DNS entry for me which works, so the server can be addressed as nww.myserver.nhs.uk I've only got ports open on the router for 80 and 443 (http and https) at the moment, so presume I need a different port to enable email services. My need is to be able to accept an email to the domain name like [email protected] in order to pick up a confirmation mail from an SSL issuer (Comodo) I guess to confirm that I control the domain. After that I don't actually need mail services on the server. I see lots of stuff about setting up SMTP services but thought that was about mail out and re-routing, but how do you get the server to "listen" for mail to the domain (assuming I open port xyz or whatever it is) ?

  Read the article

• Is there a media/music player program that has a "biased" shuffle?

  - by Joel Coehoorn

  I know in iTunes and a few other apps you can get playlists for just "highly rated" songs, but that's not quite what I want. I want to hear the lower-rated stuff, too. If I didn't like the song at some level it wouldn't be in my library in the first place, and so even a one-star song is worth the occasional listen. However, I do want to hear five-star songs a lot more often than one-star songs, even though I think I have a lot more one-star songs in my music library. So does anyone know of media player software of plugin (preferrable free) that has a shuffle mode that is biased towards songs that are rated higher, without completely excluding those that are rated lower? Right now I prefer windows media player, so a plugin for that would be ideal, but I'm not married to media player, either. Any music software that will do this would be worth some attention.

  Read the article

• nginx redirect TLD to TLD with virtual folder (example.com => example.com/test)

  - by Amund

  Im running nginx and in the config file I need to always have the domain example.com redirect to example.com/test. I tried various methods for achieving this but I always got a redirect error. What is the correct way to do this? nginx.conf snippet: server { server_name example.com www.example.com; location / { rewrite ^.+ /test permanent; } } server { listen 80; server_name www.example.com example.com; location / { root /var/www/apps/example/current/public; passenger_enabled on; rails_env production; } } Thanks!

  Read the article

• Two subnets on one switch with no VLAN and possible problems

  - by casey_miller

  As far as I know in order to use two subnets on one physical cable VLAN's are recommended. However, is it possible to achieve this (i.e: two subnets on one physical network) like 192.168.1.0/24 and 10.0.0.0/8 networks. What kind of problems or hidden rocks this way contains? With VLAN's it's possible to better isolate so users wouldn't easly sniff the other network. But in my environment it's okay if user on one subnet could listen to the traffic on another network. Is it the only problem?

  Read the article

• sshd running but no PID file

  - by dunxd

  I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

  Read the article

• nginx is not using gzip to talk to backend servers

  - by Michael Gorsuch

  Our web servers are running IIS 7 and are configured to compress dynamic and static content. When I hit these servers directly, gzip compression works. I recently placed nginx in front of them, and gzip compression has stopped. I was able to work around this by explicitly enabling gzip compression on nginx itself, but that seems a little inefficient considering I have half a dozen backends and only one active nginx box. It appears that nginx is stripping out the Accept-Encoding header. Does anyone have any advice for how to 'correct' this behavior? A sample configuration: upstream backend { server 127.0.0.1:8080; } server { listen 80; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; location / { proxy_pass http://backend; } }

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >