Search Results

Search found 5474 results on 219 pages for 'tiered storage'.

Page 46/219 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• unable to recover data from failed hdd

  - by Eslam Elyamany

  my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xe9fb38fb Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 40959999 20376576 7 HPFS/NTFS/exFAT /dev/sda4 40962046 976771071 467904513 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 82913280 86910975 1998848 82 Linux swap / Solaris /dev/sda6 86913024 394113023 153600000 7 HPFS/NTFS/exFAT /dev/sda7 40962048 82913279 20975616 83 Linux /dev/sda8 394122708 976768064 291322678+ 7 HPFS/NTFS/exFAT Partition 8 does not start on physical sector boundary. no sdc appears here , BUT it's appears on /dev/ rootghost-lap:/home/ghost# ls /dev/sd* /dev/sda /dev/sda2 /dev/sda5 /dev/sda8 /dev/sdb /dev/sdc1 /dev/sdc2 /dev/sdc6 /dev/sdc8 /dev/sda1 /dev/sda4 /dev/sda6 /dev/sda9 /dev/sdc /dev/sdc10 /dev/sdc5 /dev/sdc7 /dev/sdc9 also it appears in proc Code: rootghost-lap:/home/ghost# cat /proc/partitions major minor #blocks name 8 0 488386584 sda 8 1 102400 sda1 8 2 20376576 sda2 8 4 1 sda4 8 5 1998848 sda5 8 6 153600000 sda6 8 8 291322678 sda8 8 9 20975616 sda9 11 0 1048575 sr0 11 1 99136 sr1 8 32 244198583 sdc 8 33 14651248 sdc1 8 34 1 sdc2 8 37 15380480 sdc5 8 38 4153344 sdc6 8 39 48829536 sdc7 8 40 48829536 sdc8 8 41 110374551 sdc9 8 42 1975963 sdc10 and dmesg : [10604.777168] end_request: I/O error, dev sdc, sector 1 [10604.817238] sd 26:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10604.817243] sd 26:0:0:0: [sdc] Sense Key : Aborted Command [current] [10604.817248] sd 26:0:0:0: [sdc] Add. Sense: No additional sense information [10604.817253] sd 26:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 02 00 00 06 00 ok now , let's see what i've tried testdisk to check for partitions -- failed dd to copy data from /dev/sdcX -- provide strange output size for example /dev/sdc1 is about 15G , the output for dd is 62G+ so i had to cancle it safecopy successfully made an image for partitons , but can't fix images, can't mount it, can't do any thing with it and some other tools i've tried and all failed , so any idea ?

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• How do I resolve an "Invalid Transaction" error saving a zone config in Brocade Web Tools?

  - by Frank Szczerba

  When trying to save zoning changes in the Zone Administration tool in Brocade Web Tools, I get the status "Failed to commit changes to fabric" and the messages window shows: --- start of commit (Enable Config) at: Fri Jul 23 2010 19:43:40 GMT+00:00 Invalid Transaction --- end of commit at: Fri Jul 23 2010 19:43:47 GMT+00:00 I've tried refreshing the config and just re-saving what is already on the switch, but can't get this message to go away.

  Read the article

• V MAX Anyone..Need to learn administrating VMAX

  - by kevinmika

  Hello All, This is going to be my first post here. I 'm working as an Administrator at SNI. I have been responsible for managing Celerra and Clariion,but this new environment has 2 VMAX boxes . Since, I don't have prior experience is managing symmetrix ,i am kinda stuck here ( no training as well) Can some body suggest me a proper link where i can learn the basics as well as the administrative part of V MAX. Thanks in advance for your help! Kevin

  Read the article

• How do I make a USB stick from which to install different OS's?

  - by Hanno Fietz

  Recently, I have made a number of USB sticks to install OS's (several Linux flavors, BSD, Windows) from, on machines that didn't have CD drives. Now, I would prefer to not overwrite the install USB sticks all the time, since it's handy to have them, but neither do I want to pile up USB sticks that I only need every 6 months. It would be great to have a bootable USB stick that fires up some minimal system, lets you choose an ISO image and then reboots from there. How would I go about this? Do I use some minimal Linux? Is there some kind of modified / specialized boot loader? Can I set up GRUB to do this? Should I use virtualization?

  Read the article

• i have a priv1.edb file that is growing about 1MB every 10 seconds in sbs 2003

  - by dasko

  is there a way that i can trace what is causing the issue, i had some user say he tried to send a very large attachment and thinks it may be related? any help would be appreciated as they are currently approaching the 18GB limit on the sbs 2003 sp2. thanks.

  Read the article

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• How can I set up a load balancer to direct all Search Engine Bot traffic to one server?

  - by Ryan

  We have a simple load balancer set up on Rackspace to 3 web server nodes. After reviewing our traffic and expenses, the largest bandwidth hog is Google Bot. Since on Rackspace we pay for bandwidth by the byte, we'd like to direct all traffic from GoogleBot to another host (MediaTemple) with unlimited bandwidth. We think this would cut our hosting bill several thousand dollars a month. Is this possible? Advisable?

  Read the article

• Online File Sharing that acts just like LAN shared drives, etc.

  - by Dayton Brown

  Hi All, Have a small business client that wants to move their current file share to the web. Specs are as follows, 20 to 30 GB of space, file sizes are normal (nothing more than 50 to 100 mb) 3 users ideal solution would be exact same functionality as windows explorer. CHEAP!!! But not super cheap. I would like to keep it around $20 per user per month. I've explored a bunch of solutions, but they are all a bit on the complicated side. Thanks in advance for the recommendations.

  Read the article

• should I put my multi-device btrfs filesystem on disk partitions or raw devices?

  - by Glyph

  If I'm going to create a multi-device btrfs filesystem. The official recommendation from the documentation apppears to be to create it on raw devices; i.e. /dev/sdb, /dev/sdc, etc, but this is not explained. Are there any advantages to creating a partition table on these devices first, either GPT or MBR, and then creating the filesystem on /dev/sdb1, /dev/sdc1 et cetera? Does feeding btrfs whole devices have some particular advantage, or are these basically equivalent?

  Read the article

• Sharing music on NAS with other zunes and ipods

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40gb worth of music and my girlfriend has her iPod music library around 30gb. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (zune/ipod) seamlessly.

  Read the article

• Video encoding for archival

  - by Jim

  I would like to archive some home videos (DV). I don't need to save them losslessly, but I would like to encode them in something high-quality. What format is both pretty indistinguishable from the original and will likely be readable 15 years from now? WMA makes me nervous, because it's only one company that makes it, and they're constantly coming out with newer formats. (VLC couldn't open my WMAs that Windows Movie Maker made.) Other things I've considered are h.264, Ogg Theora, DivX, and Xvid. I don't mind paying for something, but usually that means the format is owned by only one vendor.

  Read the article

• How to Assign datastorage Limit to the datastore from LM?

  - by esxvmuser

  Guys, We have a Data Storeage XYZ with 1TB HDD and 32 GB ram. - We want to assign this to 2 different groups 500GB HDD, 16GB RAM to Group - A and 500GB HDD and 16GB RAM to another group. We want to set this limit from LM, can you please comments if this is possible? and if yes could you please point us where can we do this in LM?

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Asus WL-520GC + external HDD via Ethernet

  - by Azat

  Has anyone experience of using such combination? Exactly with the same model (or from same model line). How does it works? How hard is to set up all that? What difficulties? I use this router a couple of years, but now i haven't such external drive at my disposal. I want to buy something like Verbatim 47591 or Western Digital WDH1NC10000. (By the way, my router has no USB ports, therefore only Ethernet-ports for external HDD are supported.) Thanks you a lot in advance!

  Read the article

• How can I run Ghost from a bootable USB key drive?

  - by Joe Philllips

  I have a laptop that does not have a cd-rom or floppy drive. It is able to boot from USB though. I have a disk image (ghost) of the disk that I need to restore back onto the laptop. I can't find a way to actually run the Ghost utility from a USB key though. I believe the ghost.exe should run from within DOS just fine but I can't seem to create a bootable USB key with DOS on it that allows me to run an EXE. Edit: I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.

  Read the article

• My 4 GB microSD card only allows me to use 1 GB

  - by James Litewski

  My phone came with a 4 GB microSD card. On the card it lists that 3 GB goes to Muve Music which is Cricket's music program, and I get 1 GB... Well, I don't pay for Muve Music, so why waste the space? I thought I'd be able to simply buy an adapter and reformat the microSD card to get the full 4 GB; but that wasn't the case... I could only find the 1 GB partition on the card. I even tried reformatting the disk, but I had no luck. How can I get the full 4 GB? BTW, I'm running Mac OS X v10.7 (Lion).

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• How can I troubleshoot SSD disconnection problems on Windows 7?

  - by 0xC0000022L

  I have a small SSD (Transcend StoreJet TS256GESD200K) which I am using on several computers. The drive is formatted with NTFS and recently I started noticing disconnects. Normally one probably wouldn't notice (you don't even get the notification sound in Windows when it disconnects), but since I use USBDLM and run a VM from that SSD, I get to see this first-hand. How could I best figure out whether the problem is the hardware (SSD, USB socket, USB cable or something in the PC) or software? In short: how can I locate the source of the disruption so that I can work on removing the problem? Side-note: SMART status for the SSD is clean.

  Read the article

• Is it safe to use consumer MLC SSDs in a server?

  - by Zypher

  We (and by we I mean Jeff) are looking into the possibility of using Consumer MLC SSD disks in our backup data center. We want to try to keep costs down and usable space up - so the Intel X25-E's are pretty much out at about 700$ each and 64GB of capacity. What we are thinking of doing is to buy some of the lower end SSD's that offer more capacity at a lower price point. My boss doesn't think spending about 5k for disks in servers running out of the backup data center is worth the investment. Just how dangerous of an approach is this and what can be done to mitigate these dangers?

  Read the article

• Transfer Raid Drives to External Enclosure

  - by dubbeat

  I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

  Read the article

• Mount a network drive when windows starts up without being logged in.

  - by GLB03

  Current Scenario: I have a NAS Box, and a Windows 2003 Server that our recording software is on (Security Cameras). The software stores the data on the NAS box. Currently someone has to be logged in with valid credentials in order to keep the drive mounted (e.g. domain admin). I know you can mount the drive with a batch file, but this stores credentials in clear text and is not a good solution. I am looking for another way to get the drive to mount on startup without someone having to be logged in. I do have a generic account setup that has access to read/write to the drive but can't log-in interactively, this is the account I would like to use to mount it if any. Any suggestions?

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• How can I combine non-identical disks efficiently?

  - by Odys

  There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >