Search Results

Search found 13652 results on 547 pages for 'full'.

Page 460/547 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• Inside Red Gate - Experimenting In Public

  - by Simon Cooper

  Over the next few weeks, we'll be performing experiments on SmartAssembly to confirm or refute various hypotheses we have about how people use the product, what is stopping them from using it to its full extent, and what we can change to make it more useful and easier to use. Some of these experiments can be done within the team, some within Red Gate, and some need to be done on external users. External testing Some external testing can be done by standard usability tests and surveys, however, there are some hypotheses that can only be tested by building a version of SmartAssembly with some things in the UI or implementation changed. We'll then be able to look at how the experimental build is used compared to the 'mainline' build, which forms our baseline or control group, and use this data to confirm or refute the relevant hypotheses. However, there are several issues we need to consider before running experiments using separate builds: Ideally, the user wouldn't know they're running an experimental SmartAssembly. We don't want users to use the experimental build like it's an experimental build, we want them to use it like it's the real mainline build. Only then will we get valid, useful, and informative data concerning our hypotheses. There's no point running the experiments if we can't find out what happens after the download. To confirm or refute some of our hypotheses, we need to find out how the tool is used once it is installed. Fortunately, we've applied feature usage reporting to the SmartAssembly codebase itself to provide us with that information. Of course, this then makes the experimental data conditional on the user agreeing to send that data back to us in the first place. Unfortunately, even though this does limit the amount of useful data we'll be getting back, and possibly skew the data, there's not much we can do about this; we don't collect feature usage data without the user's consent. Looks like we'll simply have to live with this. What if the user tries to buy the experiment? This is something that isn't really covered by the Lean Startup book; how do you support users who give you money for an experiment? If the experiment is a new feature, and the user buys a license for SmartAssembly based on that feature, then what do we do if we later decide to pivot & scrap that feature? We've either got to spend time and money bringing that feature up to production quality and into the mainline anyway, or we've got disgruntled customers. Either way is bad. Again, there's not really any good solution to this. Similarly, what if we've removed some features for an experiment and a potential new user downloads the experimental build? (As I said above, there's no indication the build is an experimental build, as we want to see what users really do with it). The crucial feature they need is missing, causing a bad trial experience, a lost potential customer, and a lost chance to help the customer with their problem. Again, this is something not really covered by the Lean Startup book, and something that doesn't have a good solution. So, some tricky issues there, not all of them with nice easy answers. Turns out the practicalities of running Lean Startup experiments are more complicated than they first seem!

  Read the article

• Taking Your Business Scorecard Golfing

  - by tobyehatch

  Our workplace world is definitely changing. Not only are we taking work home, but we are working during odd hours in some very strange places.  I had the pleasure of interviewing Jacques Vigeant, Product Strategy Manager for Oracle Business Intelligence and Enterprise Performance Management, on a Podcast, and he enlightened me about how our mobile devices and business scorecards are enabling us to be more accountable and keep a watchful eye on business – even while on the golf course.Business scorecards have been around for many years - so I asked Jacques if he felt they had changed significantly due to technology. His answer was, “Yes, and no.”  Jacques agreed that scorecard enthusiasts are still passionate about executing the company strategy and monitoring Key Performance Indicators (KPIs), but scorecards and Business Intelligence (BI) as a whole have changed.  He explained that five to six years ago, people did BI work at the office and, for the most part, disconnected from their computer and workplace when they went home – with the exception of checking email and making a phone call or two. But now, that is no longer the case. People are virtually always connected with work and, more importantly, expect their BI and scorecards to be ‘always on,’ regardless of whether they are at their desk or somewhere else.Basically, the BI paradigm has changed from a 'pull' model, where employees are at their desks querying or pulling information from the system, to a 'push' model where employees expect their BI and scorecard systems to reach out (or push information) to them when there is something of note to learn or something on which they need to take action. I found this very interesting. However mobile devices do have their limitations with respect to screen sizes – does it really make sense to look at your strategy/scorecard on tiny devices? What kind of scorecard activities can you really expect to be able to do? Jacques’ answer was very logical. “When you think of a scorecard, it is really comprised of an organization of KPIs that are aligned with the strategic objectives of your company. KPIs are the heart of how you will execute your strategy. So, if you decompose that a little more, each KPI is well defined with the thresholds that you should keep an eye on and who is responsible for them. When we talk about scorecarding on a phone, we aren’t talking about surfing the strategy and exploring the strategy map like we do on the desktop. In a scorecarding context, we use the phone more as an alerting mechanism or simple monitoring device for your KPIs.”Jacques gave a great example of an inventory manager who took part of an afternoon off to go golfing before winter finally hit, and while on the front nine holes, his phone vibrated. His scorecard was alerting him that the inventory levels for one of the products was below some threshold that he had set.  From his phone, he had set up three options within Oracle Scorecard and Strategy Management (OSSM) for this type of situation:  1. Contact the warehouse manager directly by phone and work it out (standard phone function)  2. Tap/hold the KPI and add an annotation to the KPI in OSSM using the dictation capabilities of the phone and deal with it more fully when he gets back to the office  3. Tap/hold the KPI and invoke a business process from OSSM to transfer product from another warehouse with higher stock levels to the one that needs it  Being on a phone should still give you options to quickly deal with situations as needed, but mobile phones are not designed for nor should try to replicate the full desktop experience. We covered other interesting subjects in the interview, including how Oracle is keeping pace with mobile innovation and new devices such as Google Glasses, Galaxy Gear, Pebble Watches and more, and how Oracle is handling mobile security– which is great news for our mobile workforce. To listen to the entire Podcast, click here.To learn more about Oracle Scorecard and Strategy Management, click here.

  Read the article

• Why are my Unity procedural animations jerky?

  - by Phoenix Perry

  I'm working in Unity and getting some crazy weird motion behavior. I have a plane and I'm moving it. It's ever so slightly getting about 1 pixel bigger and smaller. It looks like the it's kind of getting squeezed sideways by a pixel. I'm moving a plane by cos and sin so it will spin on the x and z axes. If the planes are moving at Time.time, everything is fine. However, if I put in slower speed multiplier, I get an amazingly weird jerk in my animation. I get it with or without the lerp. How do I fix it? I want it to move very slowly. Is there some sort of invisible grid in unity? Some sort of minimum motion per frame? I put a visual sample of the behavior here. Here's the relevant code: public void spin() { for (int i = 0; i < numPlanes; i++ ) { GameObject g = planes[i] as GameObject; //alt method //currentRotation += speed * Time.deltaTime * 100; //rotation.eulerAngles = new Vector3(0, currentRotation, 0); //g.transform.position = rotation * rotationRadius; //sine method g.GetComponent<PlaneSetup>().pos.x = g.GetComponent<PlaneSetup>().radiusX * (Mathf.Cos((Time.time*speed) + g.GetComponent<PlaneSetup>().startAngle)); g.GetComponent<PlaneSetup>().pos.z = g.GetComponent<PlaneSetup>().radius * Mathf.Sin((Time.time*speed) + g.GetComponent<PlaneSetup>().startAngle); g.GetComponent<PlaneSetup>().pos.y = g.GetComponent<Transform>().position.y; ////offset g.GetComponent<PlaneSetup>().pos.z += 20; g.GetComponent<PlaneSetup>().posLerp.x = Mathf.Lerp(g.transform.position.x,g.GetComponent<PlaneSetup>().pos.x, .5f); g.GetComponent<PlaneSetup>().posLerp.z = Mathf.Lerp(g.transform.position.z, g.GetComponent<PlaneSetup>().pos.z, .5f); g.GetComponent<PlaneSetup>().posLerp.y = g.GetComponent<Transform>().position.y; g.transform.position = g.GetComponent<PlaneSetup>().posLerp; } Invoke("spin",0.0f); } The full code is on github. There is literally nothing else going on. I've turned off all other game objects so it's only the 40 planes with a texture2D shader. I removed it from Invoke and tried it in Update -- still happens. With a set frame rate or not, the same problem occurs. Tested it in Fixed Update. Same issue. The script on the individual plane doesn't even have an update function in it. The data on it could functionally live in a struct. I'm getting between 90 and 123 fps. Going to investigate and test further. I put this in an invoke function to see if I could get around it just occurring in update. There are no physics on these shapes. It's a straight procedural animation. Limited it to 1 plane - still happens. Thoughts? Removed the shader - still happening.

  Read the article

• The SmartAssembly Rearchitecture

  - by Simon Cooper

  You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

  Read the article

• Welcome 2011

  - by PSteele

  About this time last year, I wrote a blog post about how January of 2010 was almost over and I hadn’t done a single blog post.  Ugh…  History repeats itself. 2010 in Review If I look back at 2010, it was a great year in terms of technology and development: Visited Redmond to attend the MVP Summit in February.  Had a great time with the MS product teams and got to connect with some really smart people. Continued my work on Visual Studio Magazine’s “C# Corner” column.  About mid-year, the column changed from an every-other-month print column to an every-other-month print column along with bi-monthly web-only articles.  Needless to say, this kept me even busier and away from my blog. Participated in another GiveCamp!  Thanks to the wonderful leadership of Michael Eaton and all of his minions, GiveCamp 2010 was another great success.  Planning for GiveCamp 2011 will be starting soon… I switched to DVCS full time.  After years of being a loyal SVN user, I got bit by the DVCS bug.  I played around with both Mercurial and Git and finally settled on Mercurial.  It’s seamless integration with Windows Explorer along with it’s wealth of plugins made me fall in love.  I can’t imagine going back and using a centralized version control system. Continued to work with the awesome group of talent at SRT Solutions.  Very proud that SRT won it’s third consecutive FastTrack award! Jumped off the BlackBerry train and enjoying the smooth ride of Android.  It was time to replace the old BlackBerry Storm so I did some research and settled on the Motorola DroidX.  I couldn’t be happier.  Android is a slick OS and the DroidX is a sweet piece of hardware.  Been dabbling in some Android development with both Eclipse and IntelliJ IDEA (I like IntelliJ IDEA a lot better!).   2011 Plans On January 1st I was pleasantly surprised to get an email from the Microsoft MVP program letting me know that I had received the MVP award again for my community work in 2010.  I’m honored and humbled to be recognized by Microsoft as well as my peers! I’ll continue to do some Android development.  I’m currently working on a simple app to get me feet wet.  It may even makes it’s way into the Android Market. I’ve got a project that could really benefit from WPF so I’ll be diving into WPF this year.  I’ve played around with WPF a bit in the past – simple demos and learning exercises – but this will give me a chance to build an entire application in WPF.  I’m looking forward to the increased freedom that a WPF UI should give me. I plan on blogging a lot more in 2011! Technorati Tags: Android,MVP,Mercurial,WPF,SRT,GiveCamp

  Read the article

• ArchBeat Link-o-Rama Top 10 for November 4-10, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the week of November 4-10, 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (the very prolific A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. Exploring Lambda Expressions for the Java Language and the JVM | Java Magazine In the latest //Java/Architect column in Java Magazine, Ben Evans, Martijn Verburg, and Trisha Gee explain how, "although Lambda expressions might seem unfamiliar to begin with, they're quite easy to pick up, and mastering them will be vital for writing applications that can take full advantage of modern multicore CPUs." SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger ADF Mobile Custom Javasciprt – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article...) Converting SSL certificate generated by a 3rd party to an Oracle Wallet | Paulo Albuquerque Oracle Fusion Middleware A-Team member Paulo Albuquerque shares "a workaround to get your private key, certificate and CA trusted certificates chain into Oracle Wallet." How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Updated Business Activity Monitoring (BAM) Class | Gary Barg Oracle SOA Team blogger Gary Barg has news for those interested in a skills upgrade. This updated Oracle University course "explains how to use Oracle BAM to monitor enterprise business activities across an enterprise in real time. You can measure your key performance indicators (KPIs), determine whether you are meeting service-level agreements (SLAs), and take corrective action in real time." Thought for the Day "For every complex problem, there is a solution that is simple, neat, and wrong." — H. L. Mencken (September 12, 1880 – January 29, 1956) Source: SoftwareQuotes.com

  Read the article

• Serial plans: Threshold / Parallel_degree_limit = 1

  - by jean-pierre.dijcks

  As a very short follow up on the previous post. So here is some more on getting a serial plan and why that happens Another reason - compared to the auto DOP is not on as we looked at in the earlier post - and often more prevalent to get a serial plan is if the plan simply does not take long enough to consider a parallel path. The resulting plan and note looks like this (note that this is a serial plan!): explain plan for select count(1) from sales; SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- Plan hash value: 672559287 -------------------------------------------------------------------------------------- | Id  | Operation            | Name  | Rows  | Cost (%CPU)| Time     | Pstart| Pstop | -------------------------------------------------------------------------------------- PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- |   0 | SELECT STATEMENT     |       |     1 |     5   (0)| 00:00:01 |       |     | |   1 |  SORT AGGREGATE      |       |     1 |            |          |       |     | |   2 |   PARTITION RANGE ALL|       |   960 |     5   (0)| 00:00:01 |     1 |  16 | |   3 |    TABLE ACCESS FULL | SALES |   960 |     5   (0)| 00:00:01 |     1 |  16 | Note -----    - automatic DOP: Computed Degree of Parallelism is 1 because of parallel threshold 14 rows selected. The parallel threshold is referring to parallel_min_time_threshold and since I did not change the default (10s) the plan is not being considered for a parallel degree computation and is therefore staying with the serial execution. Now we go into the land of crazy: Assume I do want this DOP=1 to happen, I could set the parameter in the init.ora, but to highlight it in this case I changed it on the session: alter session set parallel_degree_limit = 1; The result I get is: ERROR: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00096: invalid value 1 for parameter parallel_degree_limit, must be from among CPU IO AUTO INTEGER>=2 Which of course makes perfect sense...

  Read the article

• New JavaScript Editor

  - by Petr

  I did not write a blog post here for a few weeks. I think the last my post was  about releasing NetBeans 7.1 in the beginning of January. The reason is not that I would change the job:), but that I have concentrated on new JavaScript support/editor. The new JavaScript editor is written basically from scratch. The answer for the question "Why from beginning again, why do you just improve the old one?" is not easy and the decision has more aspects. One of the main reasons is that the old support was written 4 years ago and the architecture is limited. Also during the time, the APIs were changed and it was very hard to keep the editor up to date. Also there is a license issue etc. In short, it is time to rewrite the old JS editor.  We build up strong community about the PHP support in NetBeans and because many PHP developers also write JavaScript code I would like to ask you for a help. There is a continual PHP build with the new JavaScript support. You can download the result of the builds here. It's a zip file. You can unzip the file anywhere, where you want. I recommend to run the build with the new userdir, to avoid damaging your current userdir. It shouldn't happened, but just to be sure:). You can achieve this through the switch --userdir. So start the unzipped file from command line from the folder, where you unzipped it, can be done with this command on unix: bin/netbeans.sh --userdir /path/to/new/userdir and on windows: bin\netbeans.exe --userdir D:\path\to\new\userdir For the developers who use continual php build already, it's well known. There is also full IDE build with the new JavaScript support for people, who need more than only PHP support.  Because the builds with the new JavaScript editor is created from a branch, there are not nightly builds available. They will be, when we merge the branch to the trunk, but so far we have to work only with the mentioned continual build. We will merge our branch after branching NetBeans 7.2 from trunk. This is also answer for the question, what release of NetBeans will contain the new JS support. It should be the release after NetBeans 7.2. I'm asking you whether you could play with the builds or better, could work in the builds with new JavaScript support and tell us every issue that you run in. It can be everything what doesn't fit you, something doesn't work as you expected, something is slow, you want change the behaviour of a feature etc. Your input / comments are very important for us and it will help us to achieve the new JavaScript support that you need.  The best way how to communicate issues is through our Bugzilla, because it is simple to track them. Sure you can write comment here:), but still I prefer Bugzilla for any issue. You can click here (you should be already log in Bugzilla), a form for the new JavaScript issue is opened, with pre-filled component Editor and NO72 keyword. I will write about the single features later, but now I will mentioned a few features that should work in better way than in the old support.  Syntactic and semantic colouring Navigator Mark Occurrences and GoTo Declaration  Code Completion Code Completion is invoked through keyboard shortcut CTRL+SPACE. The first invocation offers items that are found through a source model. Almost all editor features are based on the model, that is build from source code. There is a lot of work on the model yet, but it should offer better results. When the pop up window with code completion items is open and you press CTRL+SPACE again, then the code completion offers all elements that are in the project. In the pictures all elements that starts with letter 't'. Formatter with many options and more :) A few features are not still implemented that are supported in the old JavaScript support (for example jQuery support), but we are adding this features ASAP.

  Read the article

• Get Exchange Online Mailbox Size in GB

  - by Brian Jackett

  As mentioned in my previous post I was recently working with a customer to get started with Exchange Online PowerShell commandlets.  In this post I wanted to follow up and show one example of a difference in output from commandlets in Exchange 2010 on-premises vs. Exchange Online.   Problem    The customer was interested in getting the size of mailboxes in GB.  For Exchange on-premises this is fairly easy.  A fellow PFE Gary Siepser wrote an article explaining how to accomplish this (click here).  Note that Gary’s script will not work when remoting from a local machine that doesn’t have the Exchange object model installed.  A similar type of scenario exists if you are executing PowerShell against Exchange Online.  The data type for TotalItemSize  being returned (ByteQuantifiedSize) exists in the Exchange namespace.  If the PowerShell session doesn’t have access to that namespace (or hasn’t loaded it) PowerShell works with an approximation of that data type.    The customer found a sample script on this TechNet article that they attempted to use (minor edits by me to fit on page and remove references to deleted item size.)   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation     The script is targeted to Exchange 2010 but fails for Exchange Online.  In Exchange Online when referencing the TotalItemSize property though it does not have a Split method which ultimately causes the script to fail.   Solution    A simple solution would be to add a call to the ToString method off of the TotalItemSize property (in bold on line 5 below).   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.ToString().Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation      This fixes the script to run but the numerous string replacements and splits are an eye sore to me.  I attempted to simplify the string manipulation with a regular expression (more info on regular expressions in PowerShell click here).  The result is a workable script that does one nice feature of adding a new member to the mailbox statistics called TotalItemSizeInBytes.  With this member you can then convert into any byte level (KB, MB, GB, etc.) that suits your needs.  You can download the full version of this script below (includes commands to connect to Exchange Online session). $UserMailboxStats = Get-Mailbox -RecipientTypeDetails UserMailbox ` -ResultSize Unlimited | Get-MailboxStatistics $UserMailboxStats | Add-Member -MemberType ScriptProperty -Name TotalItemSizeInBytes ` -Value {$this.TotalItemSize -replace "(.*\()|,| [a-z]*\)", ""} $UserMailboxStats | Select-Object DisplayName,@{Name="TotalItemSize (GB)"; ` Expression={[math]::Round($_.TotalItemSizeInBytes/1GB,2)}}   Conclusion    Moving from on-premises to the cloud with PowerShell (and PowerShell remoting in general) can sometimes present some new challenges due to what you have access to.  This means that you must always test your code / scripts.  I still believe that not having to physically RDP to a server is a huge gain over some of the small hurdles you may encounter during the transition.  Scripting is the future of administration and makes you more valuable.  Hopefully this script and the concepts presented help you be a better admin / developer.         -Frog Out     Links The Get-MailboxStatistics Cmdlet, the TotalitemSize Property, and that pesky little “b” http://blogs.technet.com/b/gary/archive/2010/02/20/the-get-mailboxstatistics-cmdlet-the-totalitemsize-property-and-that-pesky-little-b.aspx   View Mailbox Sizes and Mailbox Quotas Using Windows PowerShell http://technet.microsoft.com/en-us/exchangelabshelp/gg576861#ViewAllMailboxes   Regular Expressions with Windows PowerShell http://www.regular-expressions.info/powershell.html   “I don’t always test my code…” image http://blogs.pinkelephant.com/images/uploads/conferences/I-dont-always-test-my-code-But-when-I-do-I-do-it-in-production.jpg   The One Thing: Brian Jackett and SharePoint 2010 http://www.youtube.com/watch?v=Sg_h66HMP9o

  Read the article

• Adding Output Caching and Expire Header in IIS7 to improve performance

  - by Renso

  The problem: Images and other static files will not be cached unless you tell it to. In IIS7 it is remarkably easy to do this. Web pages are becoming increasingly complex with more scripts, style sheets, images, and Flash on them. A first-time visit to a page may require several HTTP requests to load all the components. By using Expires headers these components become cacheable, which avoids unnecessary HTTP requests on subsequent page views. Expires headers are most often associated with images, but they can and should be used on all page components including scripts, style sheets, and Flash. Every time a page is loaded, every image and other static content like JavaScript files and CSS files will be reloaded on every page request. If the content does not change frequently why not cache it and avoid the network traffic?! The solution: In IIS7 there are two ways to cache content, using the web.config file to set caching for all static content, and in IIS7 itself setting aching by file extension that gives you that extra level of granularity. Web.config: In IIS7, Expires Headers can be enabled in the system.webServer section of the web.config file:   <staticContent>     <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="1.00:00:00" />   </staticContent> In the above example a cache expiration of 1 day was added. It will be a full day before the content is downloaded from the web server again. To expire the content on a specific date:   <staticContent>     <clientCache cacheControlMode="UseExpires" httpExpires="Sun, 31 Dec 2011 23:59:59 UTC" />   </staticContent> This will expire the content on December 31st 2011 one second before midnight. Issues/Challenges: Once the file has been set to be cached it wont be updated on the user's browser for the set cache expiration. So be careful here with content that may change frequently, like during development. Typically in development you don't want to cache at all for testing purposes. You could also suffix files with timestamp or versions to force a reload into the user's browser cache. IIS7 Expire Web Content Open up your web app in IIS. Open up the sub-folders until you find the folder or file you want to ad an expiration date to. In IIS6 you used to right-click and select properties, no such luck in IIS7, double click HTTP Response. Once the window loads for the HTTP Response Headers, look to the Actions navigation bar to the right, all the way at the top select SET COMMON HEADERS. The Enable HTTP keep-alive will already be pre-selected. Go ahead and add the appropriate expiration header to the file or folder. Note that if you selected a folder, it will apply that setting to all images inside that folder and all nested content, even subfolders. So, two approaches, depending on what level or granularity you need.

  Read the article

• Silverlight Cream for November 16, 2011 -- #1167

  - by Dave Campbell

  In this Issue: Michael Crump, Andrea Boschin, Michael Sync, WindowsPhoneGeek(-2-), Erno de Weerd, Jesse Liberty, Derik Whittaker, Antoni Dol, Walter Ferrari, and Jeff Blankenburg(-2-). Above the Fold: Silverlight: "10 Laps around Silverlight 5 (Part 6 of 10)" Michael Crump WP7: "31 Days of Mango | Day #2: Device Status" Jeff Blankenburg Metro/WinRT/W8: "Lighting up your C# Metro apps by being a Share Target" Derik Whittaker Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up SilverlightShow has announced a webinar you probably don't want to miss: Webinar – Introduction to XAML Development on Windows 8 Check out the top 5 from last week at SilverlightShow: SilverlightShow for November 07 - 13, 2011 From SilverlightCream.com: 10 Laps around Silverlight 5 (Part 6 of 10) Michael Crump covers a lot of territory in this Part 6 of his Silverlight 5 Beta series at SilverlightShow: P/Invoke, Multiple Windows, and Full Trust Windows Phone 7.5 - Manipulating camera stream Andrea Boschin has Part 4 of his Mango series up at SilverlightShow. He's discussing accessing the raw stream from the camera and saving it to a file. Blend 4 + VS 2011 (Preview) = Problem? Michael Sync reports a problem with Blend 4 and the VS2011 preview... followed up by a set of scripts that were posted on Connect to make the problem go away (at least for Michael) Windows Phone Toolkit MultiselectList in depth | Part1: key concepts and API WindowsPhoneGeek begins a series on the MultiselectList in the Phone Toolkit... if you've seen his tutorials, you know they're great... this one is no exception.. lots of code, info and notes getting you on-board with the features Getting Started with Windows Phone Alarms WindowsPhoneGeek next takes a sidestep from his new series and has this post on Alarms in WP7 apps .. one of the type of scheduled actions in WP7.1 ... good write-up, pictures and code Using AppHarbor, Bitbucket and Mercurial with ASP.NET and Silverlight – Part 3 Membership and Role Provider in SQL Server Erno de Weerd's part 3 of his series is up... adding Role and Membership to his application... check it out in this 17-step tutorial Yet Another Podcast #51–Shawn Wildermuth: //build, Xaml Programming & Beyond Jesse Liberty has another of his Yet Another Podcasts up and he's talking with Jon Galloway and Shawn Wildermuth... hear what *that* trio has to say about post //BUILD, and all things XAML Lighting up your C# Metro apps by being a Share Target Derik Whittaker continues to work with Metro... evidenced by this post on wiring your app up to be a Share Target .. allowing your app to consume data from other apps Photoshop in METRO style 2: Filters Antoni Dol follows up his Photoshop in Metro post with this one on filters... he's got some great screenshots... was hoping to see a link to the code... maybe I missed it! Silverlight and Sharepoint working together: a Silverlight menu for Sharepoint - Part 1 Walter Ferrari has part 1 of a series up at SilverlightShow talking about Sharepoint and Silverlight, and using Silverlight Navigation in place of what Sharepoint offers up. 31 Days of Mango | Day #2: Device Status Jeff Blankenburg is motoring along on his 31 Days of Mango. This is his Day 2 post and all about DeviceStatus, or just about everything you would like to know about your user's phone 31 Days of Mango | Day #3: Alarms and Reminders Day 3 of Jeff Blankenburg's series is about Alarms and Reminders... a way to alert your user that something needs to be done... you can create, edit, and delete them as needed Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How to Add Your Gmail Account to Outlook 2013 Using IMAP

  - by Lori Kaufman

  If you use Outlook to check and manage your email, you can easily use it to check your Gmail account as well. You can setup your Gmail account to allow you to synchronize email across multiple machines using email clients instead of a browser. We will show you how to use IMAP in your Gmail account so you can synchronize your Gmail account across multiple machines, and then how to add your Gmail account to Outlook 2013. To setup your Gmail account to use IMAP, sign in to your Gmail account and go to Mail. Click the Settings button in the upper, right corner of the window and select Settings from the drop-down menu. On the Settings screen, click Forwarding and POP/IMAP. Scroll down to the IMAP Access section and select Enable IMAP. Click Save Changes at the bottom of the screen. Close your browser and open Outlook. To begin adding your Gmail account, click the File tab. On the Account Information screen, click Add Account. On the Add Account dialog box, you can choose the E-mail Account option which automatically sets up your Gmail account in Outlook. To do this enter your name, email address, and the password for your Gmail account twice. Click Next. The progress of the setup displays. The automatic process may or may not work. If the automatic process fails, select Manual setup or additional server types, instead of E-mail Account, and click Next. On the Choose Service screen, select POP or IMAP and click Next. On the POP and IMAP Account Settings enter the User, Server, and Logon Information. For the Server Information, select IMAP from the Account Type drop-down list and enter the following for the incoming and outgoing server information: Incoming mail server: imap.googlemail.com Outgoing mail server (SMTP): smtp.googlemail.com Make sure you enter your full email address for the User Name and select Remember password if you want Outlook to automatically log you in when checking email. Click More Settings. On the Internet E-mail Settings dialog box, click the Outgoing Server tab. Select the My outgoing server (SMTP) requires authentication and make sure the Use same settings as my incoming mail server option is selected. While still in the Internet E-mail Settings dialog box, click the Advanced tab. Enter the following information: Incoming server: 993 Incoming server encrypted connection: SSL Outgoing server encrypted connection TLS Outgoing server: 587 NOTE: You need to select the type of encrypted connection for the outgoing server before entering 587 for the Outgoing server (SMTP) port number. If you enter the port number first, the port number will revert back to port 25 when you change the type of encrypted connection. Click OK to accept your changes and close the Internet E-mail Settings dialog box. Click Next. Outlook tests the accounts settings by logging into the incoming mail server and sending a test email message. When the test is finished, click Close. You should see a screen saying “You’re all set!”. Click Finish. Your Gmail address displays in the account list on the left with any other email addresses you have added to Outlook. Click the Inbox to see what’s in your Inbox in your Gmail account. Because you’re using IMAP in your Gmail account and you used IMAP to add the account to Outlook, the messages and folders in Outlook reflect what’s in your Gmail account. Any changes you make to folders and any time you move email messages among folders in Outlook, the same changes are made in your Gmail account, as you will see when you log into your Gmail account in a browser. This works the other way as well. Any changes you make to the structure of your account (folders, etc.) in a browser will be reflected the next time you log into your Gmail account in Outlook.     

  Read the article

• With 2 superposed cameras at different depths and switching their culling masks between layers to implement object-selective antialising:

  - by user36845

  We superposed two cameras, one of which uses AA as post-processing effect (AA filtering is cancelled). The camera with the AA effect has depth 0 and the camera with no effect has depth 1 as can be seen in the 5th and 6th Picture. The objects seen on the left are in layer 1 and the ones on the right are in layer 2. We then wrote a script that switches the culling masks of the cameras between the two layers at the push of buttons 1 and 2 respectively, and accomplishes object-selective antialiasing as seen in the first the three pictures. (The way two cameras separately switch culling masks between layers is illustrated in pictures 7,8 & 9.) HOWEVER, after making the environment 3D (see pictures 1-4), by parenting the 2 cameras under First-Person Controller, we started moving around in the environment and stumbled upon a big issue: When we look at the objects from such an angle as in the 4th Picture and we want to apply antialiasing to the first object (object on the left) which stands closer to our cameras now, the culling mask of 1st camera which is at depth 0, has to be switched to that object’s layer while the second object has to be in the culling mask of the 2nd camera at depth 1. And since the two image outputs of two superposed cameras are laid on top of one another; we obtain the erroneous/unrealistic result of the object farther in the back appearing closer to the camera than the front object (see 4th Picture). We already tried switching depths of cameras so that the 1st camera –with AA- now has depth 1 and the second has depth 0; BUT the camera with the AA effect Works in such a way that it applies the AA effect to its full view. So; the camera with the AA effect always has to remain at the lowest depth and the layer of the object to be antialiased has to be then assigned to the culling mask of the AA camera; otherwise all objects in the AA camera’s view (the two cubes in our case) become antialised, which we don’t want. So; how can we resolve this? The pictures are below and in the comments since each post can have 2 pics: Pic 1. No button is pushed: Both objects seem aliased. Pic 2. Button 1 is pushed: Left (1st) object is antialiased. 2nd object remains aliased. Pic 3. Button 2 is pushed: Right (2nd) object is antialiased. 1st object remains aliased. Pic 4. The problematic result in 3D, when using two superposed cameras with different depths Pic 5. Camera 1’s properties can be seen: using AA post-processing and its depth is 0 Pic 6. Camera 2’s properties can be seen: NOT using AA post-processing and its depth is 1 Pic 7. When no button is pushed, both objects are in the culling mask of Camera 2 and are aliased Pic 8. When pushed 1, camera 1 (bottom) shows the 1st object and camera 2 (top) shows the 2nd Pic 9. When pushed 2, camera 1 (bottom) shows the 2nd object and camera 2 (top) shows the 1st

  Read the article

• Duke's Choice Award Ceremony

  - by Tori Wieldt

  The 2012 Duke's Choice Awards winners and their creative, Java-based technologies and Java community contributions were honored after the Sunday night JavaOne keynotes. Sharat Chander, Group Director for Java Technology Outreach, presented the awards. "Having the community participate directly in both submission and selection truly shows how we are driving exposure of the innovation happening in the Java community," he said. Apache Software Foundation Hadoop Project The Apache Software Foundation’s Hadoop project, written in Java, provides a framework for distributed processing of big data sets across clusters of computers, ranging from a few servers to thousands of machines. This harnessing of large data pools allows organizations to better understand and improve their business. AgroSense Project Improving farming methods to feed a hungry world is the goal of AgroSense, an open source farm information management system built in Java and the NetBeans platform. AgroSense enables farmers, agribusinesses, suppliers and others to develop modular applications that will easily exchange information through a common underlying NetBeans framework. JDuchess Rather than focus on a specific geographic area like most Java User Groups (JUGs), JDuchess fosters the participation of women in the Java community worldwide. The group has more than 500 members in 60 countries, and provides a platform through which women can connect with each other and get involved in all aspects of the Java community. Jelastic, Inc. Moving existing Java applications to the cloud can be a daunting task, but startup Jelastic, Inc. offers the first all-Java platform-as-a-service (PaaS) that enables existing Java applications to be deployed in the cloud without code changes or lock-in. Liquid Robotics Robotics – Liquid Robotics is an ocean data services provider whose Wave Glider technology collects information from the world’s oceans for application in government, science and commercial applications. The organization features the “father of Java” James Gosling as its chief software architect. London Java Community The second user group receiving a Duke’s Choice Award this year, the London Java Community (LJC) and its users have been active in the OpenJDK, the Java Community Process (JCP) and other efforts within the global Java community. NATO The first-ever Community Choice Award goes to the MASE Integrated Console Environment (MICE) in use at NATO. Built in Java on the NetBeans platform, MICE provides a high-performance visualization environment for conducting air defense and battle-space operations. Parleys.com E-learning specialist Parleys.com, based in Brussels, Belgium, uses Java technologies to bring online classes and full IT conferences to desktops, laptops, tablets and mobile devices. Parleys.com has hosted more than 1,700 conferences—including Devoxx and JavaOne—for more than 800,000 unique visitors. Student Nokia Developer Group This year’s student winner, Ram Kashyap, is the founder and president of the Nokia Student Network, and was profiled in the “The New Java Developers” feature in the March/April 2012 issue of Java Magazine. Since then, Ram has maintained a hectic pace, graduating from the People’s Education Society Institute of Technology in Bangalore, India, while working on a Java mobile startup and training students on Java ME. United Nations High Commissioner for Refugees The United Nations High Commissioner for Refugees (UNHCR) is on the front lines of crises around the world, from civil wars to natural disasters. To help facilitate its mission of humanitarian relief, the UNHCR has developed a light-client Java application on the NetBeans platform. The Level One registration tool enables the UNHCR to collect information on the number of refugees and their water, food, housing, health, and other needs in the field, and combines that with geocoding information from various sources. This enables the UNHCR to deliver the appropriate kind and amount of assistance where it is needed. You can read more about the winners in the current issue of Java Magazine.

  Read the article

• Content Challenge: You Can Only Get it Here

  - by Mike Stiles

  Part of the content conundrum for brands is figuring out what kind of content customers would find cool, desirable, and relevant. The mere fact many brands have no idea what this content might be is, in itself, pretty alarming. You’d have to have a pretty thorough lack of involvement with and understanding of your customers to not know what they might like. But despite what should be a great awakening in which consumers are using every technology and trick in the book to shield themselves from ads and commercials, brand self-obsession continues as marketers concentrate on their message, their campaign, what they want to say, and what they want social users to do. When individuals conduct themselves in that same fashion on Facebook and Twitter, it gets tiresome and starts losing value pretty quickly. Their posts eventually get hidden. Conversely, friends who post things that consistently entertain or inform, with little self-marketing desperation involved, win the coveted “show all updates” setting. Of course brands are going to use social to market. It’s pretty much the point of having social in the marketing mix. And yes, people who follow a brand’s Twitter account or “Like” a brand’s Facebook Page implicitly state they want to know what’s going on with that brand’s products and services. But if you have a Facebook friend that assumes you want every one of her posts to be about what wine she likes (Mitsubishi’s current campaign is even based around weeding out pretentious Facebook friends, then running them over), then you know how it must feel for your fans and followers to get a sales pitch for your crackers or whatever you’re selling every single time. Is there such a thing as content that doesn’t sell but that still advances the brand and makes the consumer more involved and valuable? Of course. And perhaps there are no better companies than enterprise brands to do it. Enterprise organizations are large enough to go beyond a product and engage readers/viewers at higher, broader levels…communicating expertise across entire sectors, subjects and industries. You’re going from pitchman to news source, and getting full credit for it as the presenter. A recent GigaOM article pointed out the success a San Francisco-based startup called Crunchyroll is having. Their niche (and they proudly admit it’s a niche) is providing Japanese anime, Korean drama and Asian live action content to countries that can’t get it any other way via licensing deals. Shows are available in HD and on the same day they air in the host country. Crunchyroll not only gets 8 million viewers a month, they have 100,000 paying subscribers at $7-12/month. Got a point, Mike? I do happen to have one. Crunchyroll illustrates the content opportunity enterprise companies have…which is to determine your “area,” the interest graph of your customers, then provide content that speaks to and satisfies those interests that can’t be found anywhere else. At least not in the same style, or of the same quality, or with the same authority. Do what no one else is doing. Provide what no one else is providing in your sector. If underserved users are willing to pay monthly for access to awkwardly moving cartoon dragons, imagine the audience you could attract with free, useful, non-sales content in your customers’ area of interest. It’s an audience you’ll want in place when the time does come to put out that marketing message. A content challenge is better than a content conundrum any day.

  Read the article

• Normalisation and 'Anima notitia copia' (Soul of the Database)

  - by Phil Factor

  (A Guest Editorial for Simple-Talk) The other day, I was staring  at the sys.syslanguages  table in SQL Server with slightly-raised eyebrows . I’d just been reading Chris Date’s  interesting book ‘SQL and Relational Theory’. He’d made the point that you’re not necessarily doing relational database operations by using a SQL Database product.  The same general point was recently made by Dino Esposito about ASP.NET MVC.  The use of ASP.NET MVC doesn’t guarantee you a good application design: It merely makes it possible to test it. The way I’d describe the sentiment in both cases is ‘you can hit someone over the head with a frying-pan but you can’t call it cooking’. SQL enables you to create relational databases. However,  even if it smells bad, it is no crime to do hideously un-relational things with a SQL Database just so long as it’s necessary and you can tell the difference; not only that but also only if you’re aware of the risks and implications. Naturally, I’ve never knowingly created a database that Codd would have frowned at, but around the edges are interfaces and data feeds I’ve written  that have caused hissy fits amongst the Normalisation fundamentalists. Part of the problem for those who agonise about such things  is the misinterpretation of Atomicity.  An atomic value is one for which, in the strange virtual universe you are creating in your database, you don’t have any interest in any of its component parts.  If you aren’t interested in the electrons, neutrinos,  muons,  or  taus, then  an atom is ..er.. atomic. In the same way, if you are passed a JSON string or XML, and required to store it in a database, then all you need to do is to ask yourself, in your role as Anima notitia copia (Soul of the database) ‘have I any interest in the contents of this item of information?’.  If the answer is ‘No!’, or ‘nequequam! Then it is an atomic value, however complex it may be.  After all, you would never have the urge to store the pixels of images individually, under the misguided idea that these are the atomic values would you?  I would, of course,  ask the ‘Anima notitia copia’ rather than the application developers, since there may be more than one application, and the applications developers may be designing the application in the absence of full domain knowledge, (‘or by the seat of the pants’ as the technical term used to be). If, on the other hand, the answer is ‘sure, and we want to index the XML column’, then we may be in for some heavy XML-shredding sessions to get to store the ‘atomic’ values and ensure future harmony as the application develops. I went back to looking at the sys.syslanguages table. It has a months column with the months in a delimited list January,February,March,April,May,June,July,August,September,October,November,December This is an ordered list. Wicked? I seem to remember that this value, like shortmonths and days, is treated as a ‘thing’. It is merely passed off to an external  C++ routine in order to format a date in a particular language, and never accessed directly within the database. As far as the database is concerned, it is an atomic value.  There is more to normalisation than meets the eye.

  Read the article

• MEB: Taking Incremental Backup using last successful backup

  - by Sagar Jauhari

  Introduction In MySQL Enterprise Backup v3.7.0 (MEB 3.7.0) a new option '–incremental-base' was introduced. Using this option a user can take in incremental backup without specifying the '–start-lsn' option. Description of this option can be found here. Instead of '–start-lsn' the user can provide the location of the last full backup or incremental backup using the 'dir:' prefix. MEB would extract the end LSN of this backup from the mysql.backup_history table as well as the backup_variables.txt file (for verification) to use it as the start LSN of the incremental backup. Because of popular demand, in MEB 3.7.1 the option '-incremental-base' has been extended further. The idea is to allow the user to take an incremental backup as easily as possible using the '–incremental-base' option. With the new option MEB queries the backup_history table for the last successful backup and uses its end LSN as the start LSN for the new incremental backup. It should be noted that the last successful backup is used irrespective of the location of the backup. Details A new prefix 'history:' has been introduced for the –incremental-base option and currently the only permissible value is the string "last_backup". So using the new option an incremental backup can be taken with the following command: $ mysqlbackup --incremental --incremental-backup-dir=/media/mysqlbackup-repo/ --incremental-base=history:last_backup backup When MEB attempts to extract the end LSN of the last successful backup from the mysql.backup_history table, it also scans the corresponding backup destination for the old backup and tries to read the meta files at this backup destination. If a valid backup still exists at the backup destination and the meta files can be read, MEB compares the end LSN found in the mysql.backup_history table with the end LSN found in the backup meta files of the old backup. Assuming that the host MySQL server is alive and mysql.backup_history can be accessed by MEB, the behaviour of MEB with respect to verification of the old end LSN can be summarized as follows: If 'BD' is the backup destination of the last successful backup in mysql.backup_history table and 'BHT' is the mysql.backup_history table if can_read_files_at_BD:     if end_lsn_found_at_BD == end_lsn_of_last_backup_in_BHT:         continue_with_backup()     else         return_with_error() else     continue_with_backup() Advantages Apart from ease of usability an important advantage of this option is that the user can do repeated incremental backups without changing the command line. This is possible using the '–with-timestamp' option along with this new option. For example, the following command $ mysqlbackup --with-timestamp --incremental --incremental-backup-dir=/media/mysqlbackup-repo/ --incremental-base=history:last_backup backup  can be used to perform successive incremental backups in the directory /media/mysqlbackup-repo . Limitations The option '--incremental-base=history:last_backup' should not be used when the user takes different kinds of concurrent backups on the same MySQL server (say different partial backups at multiple locations). should not be used after any temporary or experimental backups performed on the server (which where successful!). needs to be used with precaution since any intermediate successful backup without the –no-connection will be used as the base backup for the next incremental backup.  will give an error in case a valid backup exists at the location of the last successful backup and whose end LSN is different from that of the last successful backup found in the backup_history table. Date: 2012-06-19 HTML generated by org-mode 6.33x in emacs 23

  Read the article

• Managing Scripts in Oracle SQL Developer

  - by thatjeffsmith

  You backup your databases, right? You backup you home computer – your media collection, tax documents, bank accounts, etc, right? You backup your handy-dandy SQL scripts, right? Ok, now that I’ve got your head nodding, I want to answer a question I get every so often: How can I manage my scripts in SQL Developer? This is an interesting question. First, it assumes that one SHOULD manage their scripts in their IDE. Now, what I think the question generally gets around to is, how can we: Navigate to our scripts Open them Execute them What a good IDE should have is an interface to your existing Version Control System (VCS.) SQL Developer supports out-of-the-box both Subversion and Git. You can also download an extension via check-for-updates to get support for CVS. Now, what I’m about to show you COULD be done without versioning and controlling your scripts – but I want to ask you why you wouldn’t want to do this? So, I’m going to proceed and assume that you do INDEED version your scripts already. Seeing what scripts you’ve already got in your repository This is very straightforward – just open the Team Versions panel. Then connect to your repository. Shows you the files in your source control system. Now, I could ‘preview’ said file right away. If I open the file from here, we get a temp file copy down from the server to the local machine. This is a local temp copy of the controlled script – I can read/execute, but not write to it. And that might be all you need. But, if your script calls other scripts, then you’re going to want to check out the server copy of your stuff down your local SVN working copy directory. That way when your script calls another script – you’re executing the PRODUCTION APPROVED copies of said scripts. And if you do SPOOL or other file I/O stuff, it will work as expected. To get to those said client copies of your scripts… Enter the Files Panel The Files panel is accessible from the View menu. You can get to your files, one of two ways. If you’ve touched the file recently, you can see it under the Recent tree. Otherwise, you can navigate to your local ‘checked out’ copies of your script(s). Open your local copies, see what’s changed, etc. And I can access the change history and see what’s been touched… What changes am I going to ‘push out’ if I commit this back to the server? Most of us work on teams, yes? This panel also gives me a heads up if someone else is making changes to the same file. I can see the ‘incoming’ changes as well. To Sum It Up… If I want to get a script to run: do a full get to your local directory open the script(s) The files panel will tell you if your local copy is out of date from the server and if you have made local changes you’ve forgotten to commit back up to the server and your fellow teammates. Now, if you’re the selfish type and don’t want to share, that’s fine. But you should still be backing up your scripts, and you can still use the Files panel to manage your scripts.

  Read the article

• Twice as long and half as long

  - by PointsToShare

  We are in a project and we hit some snags. What’s a snag? An activity that takes longer than expected. Actually it takes longer than the time assigned to it by an over pressed PM who accepts an impossible time table and tries his best to make it possible, but I digress (again!).  So we have snags and we also have the opposite. Let’s call these “cinches”. The question is: how does a combination of snags and cinches affect the project timeline? Well, there is no simple answer. It depends on the projects dependencies as we see in the PERT chart. If all the snags are in the critical path and all the cinches are elsewhere then the cinches don’t help at all. In fact any snag in the critical path will delay the project.  Conversely, a cinch in the critical path will expedite it. A snag outside the critical path might be serious enough to even change the critical path. Thus without the PERT chart, we cannot really tell. Still there is a principle involved – Time and speed are non-linear! Twice as long adds a full unit, half as long only takes ½ unit away. Let’s just investigate a simple project. It consists of two activities – S and C - each estimated to take a week. Alas, S is a snag and really needs twice the time allotted and – a sigh of relief – C is a cinch and will take half the time allotted, so everything is Hun-key-dory, or is it?  Even here the PERT chart is important. We have 2 cases: 1: S depends on C (or vice versa) as in when the two activities are assigned to one employee. Here the estimated time was 1 + 1 and the actual time was 2 + ½ and we are ½ week late or 25% late. 2: S and C are done in parallel. Here the estimated time was 1, but the actual time is 2 – we are a whole week or 100% late. Let’s change the equation a little. S need 1.5 and C needs .5 so in case 1, we have the loss fully compensated by the gain, but in case 2 we are still behind. There are cases where this really makes no difference. This is when the critical path is not affected and we have enough slack in the other paths to counteract the difference between its snags and cinches – Let’s call this difference DSC. So if the slack is greater than DSC the project will not suffer. Conclusion: There is no general rule about snags and cinches. We need to examine each case within its project, still as we saw in the 4 examples above; the snag is generally more powerful than the cinch. Long live Murphy! That’s All Folks

  Read the article

• #iPad at One Week: A Great Device Made with a Heavy Hand

  - by andrewbrust

  I have now had my iPad for a little over a week. In that time, Apple introduced the world to its iPhone OS 4 (and the SDK agreement’s draconian new section 3.3.1), HP introduced is Slate, and Microsoft got ready to launch Visual Studio 2010 and .NET 4.0. And through it all I have used my iPad. I've used it for email, calendar, controlling my Sonos, and writing an essay. I've used it for getting on TripIt and Twitter, and surfing the Web. I've used it for online banking, and online ordering and delivery of food. And the verdict? Honestly? I think it's a great device and I thoroughly enjoy using it. The screen is bright and vibrant. I am surprisingly fast and accurate when I type on it. The touch screen's responsiveness is nearly flawless. The software, including a number of third party applications, include pleasing animations and use of color that make it fun to get work done. And speaking of work, the Exchange integration is, dare I say it, robust. Not as full-featured as on a PC or Windows Mobile device, but still offering core functionality and, so far at least, without bugs. The UI is intuitive, not just to me, but also to my 5 1/2 year old, and also to my nearly-3-year-old son. They picked it up and, with just just a few pointers from me, they almost immediately knew what to do, whether they were looking at photos (and swiping/flicking along as they did so), using a drawing program, playing a game, or watching YouTube videos. The younger of the two of them even tried to get up on a chair and grab the thing today. He dropped it, from about 4 feet off the ground. And it's still fine. (Meanwhile, I'll be keeping it on a higher shelf.) I cannot fully describe yet what makes this form factor and this product so appealing. Maybe it's that it's an always-on device. Maybe it's just being able to hold such a nice, relatively large display so close. Maybe it's the design sensibility, that seems to pervade throughout the app ecosystem. Or maybe it's that one's fingers, and not pens or mice, are the software's preferred input device. Whatever the attraction, it's strong. And no matter how much I tend to root for Microsoft and against Apple, Cupertino has, in my mind, scored big, Can Microsoft compete? Yes, but not with the Windows 7 standard UI (nor with individual OEMs’ own UIs on top). I hope Microsoft builds a variant of the Windows Phone 7 specifically for tablet devices. And I hope they make it clear that all developers, and programming languages, are welcome to the platform. Once that’s established, the OEMs have to build great hardware with fast, responsive touch screens, under Microsoft's watchful eye. That may be the hardest part of getting this right. No matter what, Microsoft's got a fight on its hands. I don't know if it can count on winning that fight, either. But Silverlight and Live Tiles could certainly help. And so can treating developers like adults.  Apple seems intent on treating their devs like kids, and then giving the kids a curfew.  For that, dev-friendly Microsoft may one day give thanks.

  Read the article

• Silverlight Cream for February 06, 2011 -- #1042

  - by Dave Campbell

  In this Issue: Mike Taulty, Timmy Kokke, Laurent Bugnion, Arik Poznanski, Deyan Ginev, Deborah Kurata(-2-), Johnny Tordgeman, Roy Dallal, Jaime Rodriguez, Samuel Jack(-2-), James Ashley. Above the Fold: Silverlight: "Customizing Silverlight properties for Visual Designers" Timmy Kokke WP7: "Back button press when using webbrowser control in WP7" Jaime Rodriguez Expression Blend: "Blend Bits 21–Importing from Photoshop & Illustrator…" Mike Taulty From SilverlightCream.com: Blend Bits 21–Importing from Photoshop & Illustrator… Mike Taulty is up to 21 episodes on his Blend Bits sequence now, and this one is about using Blend's import capability, such as a .psd file with all the layers intact. Customizing Silverlight properties for Visual Designers Timmy Kokke has part 1 of 2 parts on making your Silverlight control properties in design surfaces such as Visual Studio designer or Expression Blend. An error when installing MVVM Light templates for VS10 Express Laurent Bugnion has released a new version of MVVMLight that resolves a problem with VS2010 Express version of the templates... no problem with anything else. Reading RSS items on Windows Phone 7 Arik Poznanski has a post up about reading RSS on a WP7, but better yet, he also has code for a helper class that you can grab, plus explanation of wiring it up. Integrating your Windows Phone unit tests with MSBuild #4: The WP7 Unit Test Application Deyan Ginev has a post up about Telerik's WP7 test app that outputs test results in XML from the emulator so they can be integrated with the MSBuild log. Accessing Data in a Silverlight Application: EF I apprently missed this post by Deborah Kurata last week on bringing data into your Silverlight app via Entity Frameworks... good detailed tutorial in VB and C#. Updating Data in a Silverlight Application: EF In Deborah Kurata's latest post, she is continuing with Entity Frameworks by demonstrating updating to the database... full source code will be produced in a later post. Fun with Silverlight and SharePoint 2010 Ribbon Control - Part 2 - An In Depth Look At The Ribbon Control Johnny Tordgeman has Part 2 of his Silverlight and Sharepoint 2010 Ribbon up... taking a deep-dive into the ribbon... great explanation of the attributes, code included. Geographic Coordinates Systems Roy Dallal has some Geo code up that's not necessarily Silverlight, but very cool if you're doing any GIS programming... ya gotta know the coordinate systems! Back button press when using webbrowser control in WP7 Jaime Rodriguez has a post up discussing the much-lamented back-button action in the certification requirements and how to deal with that in a web browser app. Multiplayer-enabling my Windows Phone 7 game: Day 1 Samuel Jack challenged himself to build a WP7 game in 3 days... now he's challenging himself to make it multiplayer in 3 days... this first hour-to-hour post is research of networking and an azure server-side solution. Multiplayer-enabling my Windows Phone 7 game: Day 2–Building a UI with XPF Day 2 for Samuel Jack getting the multiplayer portion of his game working in 3 days.. this day involves getting up-to-speed with XPF. How to Hotwire your WP7 Phone Battery Did you realize if you run your WP7 battery completely down that you can't charge it? James Ashley reports that circumstance, and how he resolved it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Enterprise Integration: Can Companies Afford It?

  - by Ralph Wheaton

  Each year, my company holds a global sales conference where employees and partners from around the world some together to collaborate, share knowledge and ideas and learn about future plans.  As a member of the professional services division, several of us had been asked to make a presentation, an elevator pitch in 3 minutes or less that relates to a success we have worked on or directly relates to our tag (that is, our primary technology focus).  Mine happens to be Enterprise Integration as it relates Business Intelligence.  I found it rather difficult to present that pitch in a short amount of time and had to pare it down.  At any rate, in just a little over 3 minutes, this is the presentation I submitted.  Here is a link to the full presentation video in WMV format.   Many companies today subscribe to a buy versus build mentality in an attempt to drive down costs and improve time to implementation. Sometimes this makes sense, especially as it relates to specialized software or software that performs a small number of tasks extremely well. However, if not carefully considered or planned out, this oftentimes leads to multiple disparate systems with silos of data or multiple versions of the same data. For instance, client data (contact information, addresses, phone numbers, opportunities, sales) stored in your CRM system may not play well with Accounts Receivables. Employee data may be stored across multiple systems such as HR, Time Entry and Payroll. Other data (such as member data) may not originate internally, but be provided by multiple outside sources in multiple formats. And to top it all off, some data may have to be manually entered into multiple systems to keep it all synchronized. When left to grow out of control like this, overall performance is lacking, stability is questionable and maintenance is frequent and costly. Worse yet, in many cases, this topology, this hodgepodge of data creates a reporting nightmare. Decision makers are forced to try to put together pieces of the puzzle attempting to find the information they need, wading through multiple systems to find what they think is the single version of the truth. More often than not, they find they are missing pieces, pieces that may be crucial to growing the business rather than closing the business. across applications. Master data owners are defined to establish single sources of data (such as the CRM system owns client data). Other systems subscribe to the master data and changes are replicated to subscribers as they are made. This can be one way (no changes are allowed on the subscriber systems) or bi-directional. But at all times, the master data owner is current or up to date. And all data, whether internal or external, use the same processes and methods to move data from one place to another, leveraging the same validations, lookups and transformations enterprise wide, eliminating inconsistencies and siloed data. Once implemented, an enterprise integration solution improves performance and stability by reducing the number of moving parts and eliminating inconsistent data. Overall maintenance costs are mitigated by reducing touch points or the number of places that require modification when a business rule is changed or another data element is added. Most importantly, however, now decision makers can easily extract and piece together the information they need to grow their business, improve customer satisfaction and so on. So, in implementing an enterprise integration solution, companies can position themselves for the future, allowing for easy transition to data marts, data warehousing and, ultimately, business intelligence. Along this path, companies can achieve growth in size, intelligence and complexity. Truly, the question is not can companies afford to implement an enterprise integration solution, but can they afford not to.   Ralph Wheaton Microsoft Certified Technology Specialist Microsoft Certified Professional Developer Microsoft VTS-P BizTalk, .Net

  Read the article

• My Experience at Oracle !!! By Ayush Gupta

  - by Nadiya

  Normal 0 false false false EN-US X-NONE X-NONE Hi! My name is Ayush, a Gratuate from BITS Pilani and now working and living in Bangalore. I joined Oracle in August 2013 as a Senior Consultant (SC) and would like to share my experiences over the first couple of months with you.It has been a wonderful journey so far. The last two months have been very exciting for me. First of all I would like to mention that the training program at Oracle that we went through really prepared us well. It matured us and allowed us to go from developing small applications in college to big enterprise products. Two months of initial training has had a lasting impact for me. I am also really enjoying the knowledge I have gained so far and also learning new things in the form of product training. It's really fun to work here. We are treated like adults and we are responsible for our own workloads.With that I can't keep from mentioning the fun times we as a team have in the form of Young Leadership programme in Hotel Fortune Trinity which included Luxurious buffet lunch too. Wishing it could happen more frequently.  Oracle provides one of the best opportunities to learn various technologies across different platforms. What I like best about working at Oracle is the work life balance. With the option of flexible timings, one can easily enjoy planned evenings with friends or maybe working out at the fitness centre in your building. Be it the birthday celebrations at office or the day long team outing at a resort, It’s all together a different experience. Overall, you get to take full ownership of your project and they give you a free leash on how you design your enhancements/changes.As one of the largest international companies, Oracle is obviously an expert on exploring the potential and possibility of inexperienced new hires. We were taught how to make an outstanding team work in a group training session at the first few weeks. From this experience I realized that perfect cooperation is not about where you come from or what your study background is, everyone can find his or her own role to support the team. Even though I am not that skilled in technology, my background has significantly helped me in learning new technologies in Oracle.My idea and suggestion is: for new joiners, the will to learn is be more important than what you have learnt before. Colleagues here at Oracle are professionals in their field, always friendly and glad to help. So don’t worry, all you need to do is just be confident, and have a nice attitude, Oracle will let you fully display your talent. Come and join us, here you can always find a tailor made role for you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Kill all the project files!

  - by jamiet

  Like many folks I’m a keen podcast listener and yesterday my commute was filled by listening to Scott Hunter being interviewed on .Net Rocks about the next version of ASP.Net. One thing Scott said really struck a chord with me. I don’t remember the full quote but he was talking about how the ASP.Net project file (i.e. the .csproj file) is going away. The rationale being that the main purpose of that file is to list all the other files in the project, and that’s something that the file system is pretty good at. In Scott’s own words (that someone helpfully put in the comments): A file that lists files is really redundant when the OS already does this Romeliz Valenciano correctly pointed out on Twitter that there will still be a project.json file however no longer will there be a need to keep a list of files in a project file. I suspect project.json will simply contain a list of exclusions where necessary rather than the current approach where the project file is a list of inclusions. On the face of it this seems like a pretty good idea. I’ve long been a fan of convention over configuration and this is a great example of that. Instead of listing all the files in a separate file, just treat all the files in the directory as being part of the project. Ostensibly the approach is if its in the directory, its part of the project. Simple. Now I’m not an ASP.net developer, far from it, but it did occur to me that the same approach could be applied to the two Visual Studio project types that I am most familiar with, SSIS & SSDT. Like many people I’ve long been irritated by SSIS projects that display a faux file system inside Solution Explorer. As you can see in the screenshot below the project has Miscellaneous and Connection Managers folders but no such folders exist on the file system: This may seem like a minor thing but it means useful Solution Explorer features like Show All Files and Open Folder in Windows Explorer don’t work and quite frankly it makes me feel like a second class citizen in the Microsoft ecosystem. I’m a developer, treat me like one. Don’t try and hide the detail of how a project works under the covers, show it to me. I’m a big boy, I can handle it! Would it not be preferable to simply treat all the .dtsx files in a directory as being part of a project? I think it would, that’s pretty much all the .dtproj file does anyway (that, and present things in a non-alphabetic order – something else that wildly irritates me), so why not just get rid of the .dtproj file? In the case of SSDT the .sqlproj actually does a whole lot more than simply list files because it also states the BuildAction of each file (Build, NotInBuild, Post-Deployment, etc…) but I see no reason why the convention over configuration approach can’t help us there either. Want to know which is the Post-deployment script? Well, its the one called Post-DeploymentScript.sql! Simple! So that’s my new crusade. Let’s kill all the project files (well, the .dtproj & .sqlproj ones anyway). Are you with me? @Jamiet

  Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >