Search Results

Search found 34341 results on 1374 pages for 'link local'.

Page 460/1374 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

• Reinstall Acer OEM Windows 8, Windows 8 Recovery for Acer Aspire V5 122p

  - by stwindr

  My Acer Aspire V5-122P-61456G50NSS, model - MS2377, has crashed all together. It came preloaded with Windows 8 and I upgraded to windows 8.1 3-4 days before crash. Unfortunately I did not make any recovery media before the crash. While accessing the eRecovery on Acer store with my PC's serial no. it says nor RCD available for this. I tried recovery by loading recovery manager (Left Alt + F10) Various other advanced startup options (like holding shift key while turning on or pressing F8 key) returns nothing but no luck. However I am able to enter BIOS. After doing research on above condition on various PC forums, now my questions: I read that a 'Windows Recovery Drive' can be made on any PC running Windows 8 and could be used to repair another PC. Does anybody in SuperUser community have that (or a link to download the same from somewhere? as I'm unable to find anybody running windows 8 among my friends). I downloaded a window 8 Pro ISO and made a bootable USB. I was able to go to 'Repair Your Computer' option and after going to 'Reset your PC' option found that my recovery partition has gone/missing. I tried all options available but no luck. Then I tried to install with that Windows 8 Pro ISO but got message: "The product key entered does not match any of the Windows images available for installation. Enter a different product key". before this message I did not got any form to fill product key! Does this mean that the installer was picking up the key from BIOS (OEM Key)? and may be the installation did not succeeded because OEM Windows version was Window 8 and I was trying to install Windows 8 Pro. If that is the case then, could somebody please send me link to download an Windows 8 ISO? I am helpless and couldn't find anywhere on internet (without having to pay for a new key, but I should not pay as the installer will use OEM key).

  Read the article

• Teamcity build agent gives 504 gateway timeout

  - by Anthony

  I have a new teamcity build agent machine, which when started up tries to connect to the build server and fails. It never shows up in the connected, disconnected or unauthorised agents tabs of the build server web interface. The logs on the build agent show that it fails to connect with a 504 gateway timeout. This is from teamcity-agent.log [2012-09-04 15:34:59,776] INFO - buildServer.AGENT.registration - Registering on server http://10.0.10.16, AgentDetails{Name='my-local', AgentId=null, BuildId=null, AgentOwnAddress='10.0.1.14', AlternativeAddresses=[10.0.10.32], Port=8080, Version='21424', PluginsVersion='21424-md5-somechecksum', AvailableRunners=[ABunchOfPlugins], AvailableVcs=[SomeRunners], AuthorizationToken='sometoken'} [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Call http://10.0.10.16/RPC2 buildServer.registerAgent3: org.apache.xmlrpc.XmlRpcClientException: Server returned incorrect status code: 504 Gateway Time-out [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Connection to TeamCity server is probably lost. Will be trying to restore it. Take a look at logs/teamcity-agent.log for details (unless you're using custom logging). (I have edited some identifying data out of this log excerpt) But I can reach the build server. In fact, tracert shows that it is very nearby. Tracing route to TEAMCITYSERVER [10.0.10.16] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.0.2.1 2 <1 ms <1 ms <1 ms TEAMCITYSERVER [10.0.10.16] Trace complete. I can see a teamcity login page if I hit http://10.0.10.16 in the browser. The teamcity service is logging in as the same (local administrator) account as I used to log in and test the network. The build agent is a windows 2008 server VM hosted on Ubuntu 12.04 under Oracle VirtualBox. I have disabled firewalls on both the Windows and Ubuntu machines. Other VMS with similar configuration can connect fine and do not report this error. What can possibly be preventing this connection?

  Read the article

• TSM Backup Fails with VSS

  - by user176320

  Since we rebuilt our servers to windows servers 2008 x64 r2 we have perpetual problems with scheduled backup (shadow copy). In the Application event log, the following events are logged on both nodes: The description for Event ID 4112 from source TsmVssPlugin cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: VSS processing encountered error 'VSS_E_UNEXPECTED_PROVIDER_ERROR' in the Volume Shadow Copy API 'AddToSnapshotSet'. For more information, see the IBM Tivoli Storage Manager client error log. Re installing TSM didn't change anything and still logging same events. TSM Error log file shows following: ANS1327W The snapshot operation for 'C:' failed with error code: -1. ANS5250E An unexpected error was encountered. TSM function name : BaStartSnapshot TSM function : initializeSnapshotSet() failed, check Microsoft Application event log for VSS errors TSM return code : -1

  Read the article

• Mapping Drive Error - System Error 1808

  - by Julian Easterling

  A vendor is attempting to map and preserve a network drive using nt authority/system; so it stays persistent when the interactive session of the server is lost. They were able to do this on one server (Windows 2008 R2) but not a second computer (also Windows 2008 R2). D:\PsExec.exe -s cmd.exe PsExec v1.98 - Execute processes remotely Copyright (C) 2001-2010 Mark Russinovich Sysinternals - www.sysinternals.com Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. all rights reserved. C:\Windows\system32>whoami nt authority\system C:\Windows\system32>net use New connections will be remembered. Status Local Remote Network -------------------------------------------------------------------- OK X: \\netapp1\share1 Microsoft Windows Network The command completed successfully. C:\Windows\system32>net use q: \\netapp1\share1 System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. C:\Windows\system32> I am unsure on how to set up a "machine account mapping" which will preserve the drive letter of the Netapp path being mapped, so that the service account running a Windows service can continue to access the share after interactive logon has expired on the server. Since they were able to do this on one server but not another, I'm not sure how to troubleshoot the problem? Any suggestions?

  Read the article

• xinetd 'connection reset by peer'

  - by ceejayoz

  I'm using percona-clustercheck (which comes with Percona's XtraDB Cluster packages) with xinetd and I'm getting an error when trying to curl the clustercheck service. /usr/bin/clustercheck: #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="clustercheckuser" MYSQL_PASSWORD="clustercheckpassword!" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" exit 0 else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" exit 1 fi /etc/xinetd.mysqlchk: # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID only_from = 10.0.0.0/8 127.0.0.1 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } When attempting to curl the service, I get a valid response (HTTP 200, text) but a 'connection reset by peer' notice at the end: HTTP/1.1 200 OK Content-Type: text/plain Percona XtraDB Cluster Node is synced. curl: (56) Recv failure: Connection reset by peer Unfortunately, Amazon ELB appears to see this as a failed check, not a succeeded one. How can I get clustercheck to exit gracefully in a manner that curl doesn't see a connection failure?

  Read the article

• multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

  - by user1531897

  i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

  Read the article

• ADFS 2.1 proxy trust establishment error

  - by Tommy Jakobsen

  I'm trying to install an ADFS proxy. In our intranet we have a ADFS 2.1 server running on Windows 2012 which is working fine. Now we're trying to deploy a proxy to this one for internet access, using Windows 2012 R2's Web Application Proxy. I'm getting the following error on the proxy server, event ID 393: Message : An error occurred while attempting to establish a trust relationship with the Federation Server. An error occurred when attempting to establish a trust relationship with the federation service. Error: Forbidden Context : DeploymentTask Status : Error I'm not getting any errors on the ADFS server. I've tried with different credentials. The ADFS service account, a domain administrator who is a member of the local administrators group on the ADFs server, and the local administrator account on the ADFS server. Same error message. Both port 80 and 443 is accessible from the proxy server to the internal ADFS server, and I can access the ADFS metadata endpoint from the proxy server. I'm using the same trusted SSL certificate (wildcard) on both machines. Do you have any ideas that can help me troubleshoot this problem?

  Read the article

• UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

  - by BoyMars

  I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

  Read the article

• How do I upgrade django on ubuntu 9.04?

  - by Lorin Hochstein

  I've got Django 1.0.2 installed on Ubuntu 9.04. I'd like to upgrade Django, because I have an app that needs Django 1.1 or greater. I tried using pip to do the upgrade, but got the following: $ sudo pip install Django==1.1 Downloading/unpacking Django==1.1 Downloading Django-1.1.tar.gz (5.6Mb): 5.6Mb downloaded Running setup.py egg_info for package Django Installing collected packages: Django Found existing installation: Django 1.0.2-final Not uninstalling Django at /var/lib/python-support/python2.6, outside environment /usr Running setup.py install for Django changing mode of build/scripts-2.6/django-admin.py from 644 to 755 changing mode of /usr/local/bin/django-admin.py to 755 Successfully installed Django It seems like it worked, but it refuses to remove the original Django 1.02, and sure enough: $ pip freeze | grep -i django Django==1.0.2-final django-debug-toolbar==0.8.3 django-sphinx==2.2.3 $ /usr/local/bin/django-admin.py --version 1.0.2 final The problem, apparently, is that pip won't uninstall files outside of /usr. I'd like to remove the existing Django files manually, but I have no idea how to do that, because I'm unfamiliar with how Python packages are laid out in Ubuntu. It looks pretty complicated. The site-packages directory is: $ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages However, that's not where the django files live: $ ls -ld /usr/lib/python2.6/dist-packages/[Dd]jango* ls: cannot access /usr/lib/python2.6/dist-packages/[Dd]jango*: No such file or directory There's a /var/lib/python-support/python2.6/django directory, and the __init__.py file in that directory points to /usr/share/python-support/python-django/django/__init__.py. Clearly, pip is able to figure out where the files live. Is there any way to retrieve the list of files associated with the django package so I can just delete them manually?

  Read the article

• How to reset Bash on Mac OSX, .bash_profile corrupted and bash no longer works

  - by user1463172

  I am on a MacBook Pro, running the latest version of Mountain Lion. I really need some help, I have managed some how to damage my .bash_profile (I think) so that every time I open up the terminal I get the error listed below. -bash: export: `/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/go/bin': not a valid identifier -bash: export: `/Users/rob/Applications/sbt/bin:': not a valid identifier env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory -bash: tar: command not found -bash: grep: command not found -bash: cat: command not found -bash: find: command not found I am not sure what has happened, I have no sudo, cd or any normal commands. The only way I have been able to get to any of the main directories is through the go to folder command in finder and try to find the file to no avail. To top it all off I think I created a file that might be causing the issue, I wanted to edit the .bash_profile so I typed sudo nano ./bash_profile This open a new file in nano which I think was then saved. After this I opened the real .bash_profile to add in the path for node.js. If I can get to the .bash_profile I think I can get it back on track but I can't find it, should I reinstall bash? If so how would I do that on a mac, I tried using brew install bash to which I get -bash: brew: command not found I am really stuck if anyone can help I would be really appreciated. Many thanks

  Read the article

• javaws not found

  - by Hunt

  I have a server which has centos installed in it. Recently I have installed jdk 1.6 into it. When I try to run java command from shell it's working perfectly fine. Java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when I type which java. When I tried running javaws (which comes with the jdk 1.6 only) it is showing me following error: Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory Executing env command prints following details: HOSTNAME=XX-XXX-XXX-XX TERM=xterm SHELL=/bin/bash HISTSIZE=1000 OLDPWD=/usr/java SSH_TTY=/dev/pts/1 USER=root LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35: JAVA_PATH=/usr/java/jre1.6.0_24/jre/bin MAIL=/var/spool/mail/root PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jre1.6.0_24/jre/bin INPUTRC=/etc/inputrc PWD=/usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin JAVA_HOME=/usr/java/jre1.6.0_24/jre/bin LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass SHLVL=1 HOME=/root LOGNAME=root JAVAWS_HOME=/usr/java/jre1.6.0_24/bin SSH_CONNECTION=175.100.170.26 3387 64.150.190.94 22 LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/env

  Read the article

• Problem with squid log files

  - by Gatura

  I am using SARG to get a report on the squid log files, I get this result /usr/local/Sarg/bin/sarg -l /usr/local/squid/var/logs/access.log SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% sort: open failed: +6.5nr: No such file or directory SARG: (index) Cannot open file: /Applications/Sarg/reports/index.sort SARG: Records in file: 0, reading: 0.00% What could be the problem?

  Read the article

• Do we need to explicitly pass php.ini's location to php-fpm?

  - by F21

  I am seeing a strange issue where my php.ini is not used if I do not explicitly pass it to php-fpm when starting it. This is the upstart script I am using: start on (filesystem and net-device-up IFACE=lo) stop on runlevel [016] pre-start script mkdir -p /run/php end script expect fork respawn exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf If PHP is started with the above, my php.ini is never used, even though it is in Configuration File (php.ini) Path. This is the relevant part from phpinfo(): Configuration File (php.ini) Path /etc/php/ Loaded Configuration File (none) Scan this dir for additional .ini files (none) Additional .ini files parsed (none) If I modify the last line of the upstart script to point php-fpm to php.ini explicitly: exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf -c /etc/php/php.ini Then we see that the php.ini is loaded: Configuration File (php.ini) Path /etc/php/ Loaded Configuration File /etc/php/php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Why is this the case? Is this a quirk in php-fpm? Minor update: This also seems to be a problem for php5-fpm installed using apt-get. I did a test install in a Ubuntu Server 12.04 virtual machine by running the following: sudo apt-get install nginx php5-fpm PHP-FPM and nginx were started after installation and everything seemed fine. I then uncommented php's settings in nginx's configuration and placed a test phpinfo() file to inspect PHP's settings. The relevant bits are: Configuration File (php.ini) Path /etc/php5/fpm Loaded Configuration File (none) Scan this dir for additional .ini files /etc/php5/fpm/conf.d Additional .ini files parsed /etc/php5/fpm/conf.d/10-pdo.ini I noted that no php.ini was loaded either. However, if I go to /etc/php5/fpm, I can see that a php.ini exists. I also checked the start up scripts for PHP-FPM and the -c parameter was not used to link the ini file to PHP. This can potentially be confusing for people who would expect php.ini to be loaded automatically by PHP-FPM.

  Read the article

• Alternative to robocopy /MIR

  - by Robin Day

  We run a number of web apps that store a lot of local data in small xml files. One part of our backup / recovery strategy is to produce a local mirror of the file system via a VPN to the hosting centre. The VPN connection is only via a 12Mbps ADSL and whilst there are a lot of files and directories, the actual number of files that changes is quite small. Although the bandwidth is probably an issue, I'm seeing results such as the output below. The robocopy /MIR took 5 hours to run yet only 30 mins to actually perform the copy. Does anyone have any suggestions as to ways to improve this. The 5 hours is now bordering on too slow and if we can't find a way to speed this up then we're going to have to come up with a completely different solution. Total Copied Skipped Mismatch FAILED Extras Dirs : 17625 6618 11007 0 0 0 Files : 1112430 1223 1111207 0 0 0 Bytes : 57.451 g 192.25 m 57.263 g 0 0 0 Times : 5:01:23 0:35:55 0:00:00 4:25:27 Speed : 93509 Bytes/sec. Speed : 5.350 MegaBytes/min. Ended : Fri Apr 16 05:54:23 2010

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

  - by ewwhite

  Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by user65124

  Hi there. We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• User cannot access a system DSN on Windows Server 2008

  - by Ra Osolage

  We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

  Read the article

• Issues with doing a P2V on Exchange 2007

  - by PokermUNKEE

  I shutdown all Exchange services on the physical box and did a convert. Everything converted fine. Server booted up no issues and I could receive email from the outside world with no issues. But I am unable to send emails internally or externally. They just sit in the Outbox. I also disabled the DHCPClient service as I didn't want the server to get an IP address from DHCP when it first came online. It came online with no IP, then I used console to assign the correct static IP address (same one on the physical server) and rebooted. I ran the Exchange Troubleshooting Agent and it gave me the following errors: The value for the '\MSExchangeIS Mailbox\Messages Queued For Submission' counter on server exchange is greater than zero (average value is 8.8) and it appears that 'MSExchangeMailSubmission' is failing to submit messages to at least one computer with the Hub Transport server role installed over the last minute. Found 1 computers with the Hub Transport server role installed in the same Active Directory site as server exchange using local Active Directory site GUID 'ce8a4367-1bf6-4825-9cac-c4e2b115c450'. Check Local Active Directory Site Hub Transport Server Role Health (Mailflow_CheckLocalBhHealth1.1.1.1.1.1.1.1) I have one Exchange server with all the roles on it. Has anyone see this before when doing a convert? Please help :(

  Read the article

• Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

  - by alharaka

  UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

  Read the article

• Adding data sources for unixODBC/isql on Mac OSX Lion

  - by NP01

  I have installed unixODBC from source and mysql-odbc connector from .dmg installer on Mac OSX Lion. This was done a while ago, and at that time I successfully installed a data source (let's call it foo). Now I am trying to add another data source (DSN). I've done this through both ODBC Manager and the command-line tool myodbc-installer given with the tar bundle of the mysql-odbc connector from the mysql website. An entry shows up in /Library/ODBC/odbc.ini, which looks like this: [ODBC Data Sources] bar = MySQL ODBC 5.1 Driver [ODBC] Trace = 0 TraceAutoStop = 0 TraceFile = TraceLibrary = [myodbc] Driver = /usr/local/lib/libmyodbc5.so SERVER = localhost PORT = 3306 [bar] Driver = /usr/local/lib/libmyodbc5.so Description = DATABASE = bar However, isql fails to find it: anitya:Preferences neil$ isql bar bar bar -v [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Weird thing is, the old DSN foo, which is not to be seen in /Library/ODBC/odbc.ini or /etc/odbc.ini, works fine: anitya:Preferences neil$ isql foo foo foo +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> I'm miffed about where the DSN entries need to be entered on OSX Lion to be found by isql. Thanks in advance for your help!

  Read the article

• Problem posting multipart form data using Apache with mod_proxy to a mongrel instance

  - by Ryan E

  I am attempting to simulate my site's production environment as closely as I can on my local machine. This is a rails site that uses Apache w/ mod_proxy to forward requests to a mongrel cluster. On my Mac OSX Leopard machine, I have the default install of apache running and have configured a vhost to use mod_proxy to to forward requests to a local running mongrel instance on port 3000. <Proxy balancer://mongrel_cluster-development> BalancerMember http://127.0.0.1:3000 </Proxy> For the most part, this is working fine. I can browse my development site using the ServerName of the vhost I configured and can confirm that requests are being properly forwarded to the mongrel instance. However, there is a page on the site that has a multipart form that is used to upload an image to the server. When I post this form, there is a delay of about 5 minutes and the browser ultimately returns a Bad Request Your browser sent a request that this server could not understand. In the error log for my vhost: [Tue Sep 22 09:47:57 2009] [error] (70007)The timeout specified has expired: proxy: prefetch request body failed to 127.0.0.1:3000 (127.0.0.1) from ::1 () This same form works fine if I browse directly to the mongrel instance (http://127.0.0.1:3000). Anybody have any idea what the problem might be and how to fix it? If there is any important information that I neglected to include, post a comment, and I can add to this question. Note: Upon further investigation, this appears to be a problem specific to Safari. The form works fine in Firefox.

  Read the article

• Why am I getting a warning that windows is logging on with a temporary profile to run a task scheduler task?

  - by Dan C

  I am having a strange problem with the Windows Server 2008 Task Scheduler. I have to run a small command-line application every few minutes. This application just executes a quick web service call on the localhost and adds an entry to a log file; so it should not need anything special in terms of permissions. First, I created a new user account "my_scheduler" just for the task. This account is a member of the Users group (not sure what other settings I should turn on/off) and set it's password to not expire. I then create a task to run the application every few minutes. I set it to "Run whether user is logged on or not" and turned on "Do not store password. The task will only have access to local resources" (I did this since it's not hitting anything on the network. I did not turn on "Run with highest privileges" since it does not seem to need them. I set the schedule to "After triggered, repeat every 30 minutes for a duration of 1 day" and "Allow task to be run on demand" (no other settings enabled). However, I notice that in the Event Log, I see a bunch of these warnings whenever the task is run: "Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off." Even though I get the warning, the task is executing (I see the log entries appearing). Another (possibly related) issue is that I also see that it's starting multiple copies of the task (within a few seconds of each other) even though it should only start one. This is also a big problem. Any idea how I can fix this? Thanks in advance, Dan

  Read the article

• Crazy problem with Nginx, PHP5-FPM on Ubuntu

  - by Emmanuel

  I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

  Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >