Search Results

Search found 29876 results on 1196 pages for 'ubuntu 8 04 lts'.

Page 461/1196 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >

  • Disk failure is imminent Laptop Hard drive ~5 months old

    - by Drew
    There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

    Read the article

  • HP Envy 15 3040nr sound issues

    - by Lenny
    I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

    Read the article

  • NVIDIA proprietary driver logging me to console instead of GUI

    - by Woozie
    Firstly i want to apologise for any mistakes, English is not my native language. My problem is I can't get NVIDIA proprietary drivers to work. I tried to install it on Ubuntu 12.04.1 32 and 64 bits, Ubuntu 12.10 Beta 2, Linux Mint 13 Cinnamon 64 bits and openSUSE 12.2 64 bits and the error code and symptoms (logging to tty1 instead of GUI logging, low-res bootscreen) are the same for all of these distros. Right, I didn't tell what's the error code. It appears on sudo startx. NVIDIA: could not open the device file /dev/nvidia0 (Input/output error). I know that's the common problem, but I tried to blacklist or even remove the noveau drivers, install NVIDIA driver from repo/from official script/in "Additional drivers", editing xorg.conf and using Xorg -configurate and nvidia-xconfig, actualizing the kernel and entire distro and many, many things that I don't remember. But the problem is even better: entire Cinnamon (Mint) is freezing during the work. I found the error code, which appears during the freeze: Oct 1 20:57:17 WoozieLaptop kernel: [ 308.120176] [drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/1 Mthd 0z0060 Data 0xbcef0201 My Xorg.0.log is here. It was made on Ubuntu 12.04.1 after installing NVIDIA drivers (obviously). inxi -G from Mint: Graphics: Card: NVIDIA GT216 [GeForce GT 240M] X.org: 1.11.3 drivers: (unloaded: nvidia) FAILED: nouveau,vesa,fbdev tty size: 80x25 Advanced Data: N/A for root out of X lspci -k | grep -A2 VGA from Mint: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 240M] (rev a2) Subsystem: Lenovo Device 38ff Kernel driver in use: nvidia My hardware is: Lenovo IdeaPad Y550 Intel C2D T6600 NVIDIA GeForce GT 240M 4 GB of RAM Any help will be appreciated. This problem totally disabled my laptop from daily using. Cheers, Woozie

    Read the article

  • Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

    - by oyse
    I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

    Read the article

  • I am trying to install Kubuntu, but I get a metalink error

    - by Brook Bentley
    It looks like the ISO metalink is broken for the Kubuntu install from Wubi. Can you please fix this? Or, help me figure out what I'm doing wrong. I receive the following error: 'An error occurred: Cannot download the metalink and therefore the ISO For more information, please see the log file: c:\users\bbentley\appdata\local\temp\wubi-12.04-rev269.log' The log file contains the following errors: '08-30 14:28 DEBUG TaskList: ### Running get_metalink... 08-30 14:28 DEBUG downloader: downloading http://releases.ubuntu.com/kubuntu/12.04/kubuntu-12.04-desktop-amd64.metalink > C:\ubuntu\install 08-30 14:28 ERROR CommonBackend: Cannot download metalink file err=[Errno 14] HTTP Error 404: Not Found 08-30 14:28 DEBUG downloader: downloading http://cdimage.ubuntu.com/kubuntu/daily-live/current/precise-desktop-amd64.metalink > C:\ubuntu\install 08-30 14:28 ERROR CommonBackend: Cannot download metalink file2 err=[Errno 14] HTTP Error 404: Not Found 08-30 14:28 DEBUG TaskList: ### Finished get_metalink 08-30 14:28 ERROR TaskList: Cannot download the metalink and therefore the ISO Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 406, in download_iso Exception: Cannot download the metalink and therefore the ISO 08-30 14:28 DEBUG TaskList: # Cancelling tasklist 08-30 14:28 DEBUG TaskList: # Finished tasklist 08-30 14:28 ERROR root: Cannot download the metalink and therefore the ISO Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 406, in download_iso Exception: Cannot download the metalink and therefore the ISO'

    Read the article

  • Is a disk/ata timeout exception dangerous?

    - by j-g-faustus
    I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

    Read the article

  • Touchpad right click doesn't work on HP Envy 14 beats

    - by jdrageme01
    I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

    Read the article

  • Why can't I install from software center?

    - by user64720
    There was a problem upgrading to Firefox 13. This error kept returning: /var/cache/apt/archives/firefox_13.0+build1-0ubuntu0.12.04.1_i386.deb W: Waited for dpkg --assert-multi-arch but was not there - dpkgGo (10: There are no "child" processes). Now it seems that there is some problem with dpkg and I can't install anything from software center. I already tried to clean previous packages with sudo rm /var/lib/apt/lists/* -vf and then sudo apt-get update, it didn't work. When running sudo dpkg --configure -a, I get this: dpkg: problems with dependencies prevent the configuration of firefox-globalmenu: firefox-globalmenu depends on firefox (= 13.0+build1-0ubuntu0.12.04.1); however: The package is not installed. dpkg: error while processing firefox-globalmenu (--configure): problems com dependencies - leaving unconfigured There has been found errors while processing: firefox-globalmenu What should I do to fix this?? EDIT: I don't have the necessary expertise to understand why what I did worked and what was causing the conflict, but anyway, since there was a problem with firefox-globalmenu:, I went to synaptics package manager, I removed this particular package and reinstalled it. After that, I was able to install Firefox from synaptics and also any other applications from software center. However, still there was a problem, when running sudo apt-get update, the following kept returning: Failed to get gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages Verification code hash doesn't match. E: Some archives index failed at being downloaded. They have been ignored, or older copies are used instead. So I typed sudo rm /var/lib/apt/lists/* -vf in terminal and then again sudo apt-get update and everything is fine now. I did this before an answer was posted, anyway I agree the problem was that particular package and its removal. So I'll mark the below answer as accepted.

    Read the article

  • wget has a 4 second delay

    - by guisius
    Hello. I have tried to wget a page with windows/mac, and the response is instant while the linux vesion needs to wait for 4 seconds before it shows the response. I just hope this can be solved. More information added: in Ubuntu : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:21:17-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:21:22 (1.88 MB/s) - `test.txt' saved [17] while in Mac OS : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:22:33-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:22:33 (755 KB/s) - `test.txt' saved [17] in ubuntu it delays 4 seconds while windows and mac will not i believe it may related to some setting in the network config such as packet size , window frame , but i have no idea to set this PS: because the limit of the post not allow to post the url so i mark this as xxx

    Read the article

  • USB flash module giving errors

    - by vshenoy
    Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

    Read the article

  • WiFi can't connect after suspend

    - by CyberOPS
    I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

    Read the article

  • Install Problems on ASUS X401A Notebook

    - by tired_of_trying
    okay... I tried many approaches to install Ubuntu 12.xxx on my new Asus notebook with varying degrees of failure... First: I'm not a newbie but I'm as frustrated as one! Install background: Install from USB DVD drive: The install went well. Re-booted machine. choose ubuntu and it errors with a MBR file error (can't remember the exact wording - something to do with missing the file. Choosing to boot W7 works fine. Install from USB Stick: Couldn't get machine to recognize the .iso Install into Oracle's Vbox: Got the boot splash screen, then hangs with a zillion errors. Note: I didn't have any problems installing ubuntu in Vbox on my iMac and it run's great. Installed using wubi: Installed fine but get errors when booting ubuntu (it doesn't find the needed wubi files). I downloaded to the C: drive and tried installing from there - no luck. For kicks: I tried running Slax Linux .iso from a USB stick and it runs fine. Some Questions: Did I use the correct .iso? (I tried 12.04.0 and 12.04.1 both 32 and 64 bit versions. I simply downloaded them from the download link and didn't use/look for an alternate version. Do I need to do something special when burning the .iso to disc? What? I did read tons of posts but, no luck with finding the solution. Any help is appreciated... thanks

    Read the article

  • Can't install plugins in Eclipse 3.5 (Galileo) on Ubuntu

    - by dfrankow
    Eclipse Version 3.5.2 Build id: M20100211-1343 Platform: Ubuntu 10.4 I go to install any new software Eclipse plugins (e.g., pydev, subclipse), and it gets to the 60% mark and stops. I wait for a long while and nothing happens. When I hit "cancel" a security warning comes up "Warning: You are installing software that contains unsigned content.." I click "OK" but it's too late because I've cancelled the installation already. It won't pop up until I hit "cancel". I've tried moving all the windows around, that security warning is not there. In previous incarnations of Eclipse, I've been able to click "OK" on that warning (no canceling) and all is well. I've also tried two JREs (Ubuntu's default openjdk and Sun's JDK 1.6.0_20). Is there some way to get that warning to come up, or even just have it always accept unsigned content? I've downloaded the zip of pydev and unzipped it into ~/.eclipse/org.eclipse.platform_3.5.0_155965261/ and Eclipse doesn't have Pydev when restarted, so manually installing plugins is also a pain. This is not my day. Yes, I see the other questions of this type and they don't seem to answer my problem.

    Read the article

  • Android Plugin in Eclipse 3.5 on Ubuntu 64bit got problems with properties

    - by Zordid
    Hi there! I got a huge problem with the Android Development Tools ADT running in Eclipse Galileo (3.5.1) on Ubuntu 9.10, 64bit. On this platform, I do not manage to see any property edit dialogs for layout properties. E.g. the one where you can select a string resource ID for text fields, or a drawable ID for image fields or backgrounds. Whenever I click on the ... button next to the property value - nothing happens, except this button disappears. Properties with a list of possible values, e.g. "wrap_content" or "fill_parent" are displayed in a dropdown box directly in the properties field. On a different system I work in a Windows environment with Eclipse 3.4 and the same ADT: no problems whatsoever, everything works fine, the dialogs come perfectly. Does anyone know what to do here? Where's the problem? Why does Eclipse not tell me that something goes wrong? Thanks! NEW DISCOVERIES: I found out that it might not even be an Android problem, but a general Eclipse problem that I can see with all version (Ganymede, Galileo, Helios) on my Linux (Ubuntu) system. It must be a simple UI problem: the button with ... next to the values does not receive the mouse click!! I managed to see the appropriate dialogs to edit the property values by doubleclicking the button - crazy, strange, ugly behavior! But why on earth does nobody else know about this problem - I cannot find anything else on the net about it! Could it be related to this strange "GDK native window problem" on Gnome? HELP!

    Read the article

  • Getting Google repositories to work with apt-get on Ubuntu Hardy

    - by Justin
    I've installed Google Chrome on Hardy via the .deb file and would like to configure apt-get for automatic updates. [I have another machine running Ubuntu Karmic where this works fine; apt-get knows the package as 'google-chrome'; I'm now using a Dell Mini 10 with Ubuntu 8.04 LTS installed] As part of the .deb install, two entries have been added to the third- party software sources tab: http://dl.google.com/linux/deb stable main http://dl.google.com/linux/deb stable non-free main However if I check for updates with either of these clicked, I get the following error: Failed to fetch http://dl.google.com/linux/deb/dists/stable/Release Unable to find expected entry main/binary-lpia/Packages in Meta-index file (malformed Release file?) There is a thread here which indicates others have had the same problem: http://www.google.co.uk/support/forum/p/Chrome/thread?tid=097d103f87b49abe&hl=en This references a further thread: http://code.google.com/p/chromium/issues/detail?id=38608 which suggests the problem has been fixed. Despite this I remain unable to get it to work, and none of the suggested workarounds seem to work either. Ideas ? Thanks.

    Read the article

  • Can't install libopenssl-ruby

    - by Oetzi
    I'm trying to install ruby on rails and I can't seem to install libopenssl-ruby. I'm on a VPS and I've installed Jaunty as the newer releases don't seem to work very nicely. When I do: apt-get install libopenssl-ruby I get: E: Package libopenssl-ruby has no installation candidate Originally it simply said that it couldn't find the package but after wget'ing a deb form here: http://linuxappfinder.com/package/libopenssl-ruby and trying to install using dpkg I get this new error. Dpkg itself said that it couldn't install my deb as it depended on 'libopenssl-ruby'. Currently my sources.lst is this: ###### Ubuntu Main Repos deb http://us.archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse Does anyone know what might be wrong?

    Read the article

  • How can I upgrade to 10.10 from 10.10 beta

    - by n179911
    Can you please tell me how can I upgrade to ubuntu 10.10 release from ubuntu 10.10 beta? I have go to update manager, it keeps saying there is no update. And what I go to synaptic package manager, I see this error: W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://extras.ubuntu.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192 W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/maverick/Release W: Some index files failed to download, they have been ignored, or old ones used instead.

    Read the article

  • How to increase screen resolution in Hyper-V

    - by Saad
    I am using Ubuntu 12.04 on Hyper-V in windows 8. I want to increase the resolution so that Ubuntu window can occupy my whole screen. Does anyone have any idea of how it can be done ? I found one solution http://nramkumar.org/tech/blog/2013/05/04/ubuntu-under-hyper-v-how-to-overcome-screen-resolution-issue/, I have installed OpenSSH server on Ubuntu and Xming and Putty on windows. I am not sure what hostname to use to connect to Ubuntu (running in Hyper-V), using [email protected] or username@localhost in the hostname field returns error "Network error:connection refused". Can someone help me figure out what i am doing wrong ?

    Read the article

  • How do I know if I am running Wubi or a proper dual-boot?

    - by Don
    I tried to setup a "proper" Windows/Ubuntu dual-boot system, by installing Ubuntu from a USB key. However, I simply could not get the laptop to boot off the USB despite the fact that I made the appropriate changes to the boot device order in the BIOS. So I then turned to Wubi, and (to cut a long story short) it seems I now have a proper dual-boot setup, because I don't need to launch Ubuntu from windows. When I start the laptop, I get that screen that asks me whether I want to run Windows or Ubuntu. However, I'm still not sure if this is a proper dual-boot setup, because when I run windows, it seems that my C: and D: drives are still the same size. If it was a proper dual boot I'd expect separate partitions to have been created for Ubuntu which would have removed some space from the C: and D: drive sizes displayed in Windows. Is there some way that I can confirm whether I'm running a proper dual-boot, and if not, is there some process for converting a Wubi installation to a proper dual-boot?

    Read the article

  • Upgrading 13.04 to 13.10, could not calculate the upgrade

    - by topless
    I am running sudo update-manager -d and start the upgrade process. I select upgrade option and when then manager enters Setting new software channels it throws an error. Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. I have disabled all unofficial and third party packages, I am not running a pre-release version since I am at 13.04 and I am trying to update to beta 2 which is not a pre-release. Before I fill a bug report, since its happening to both of my systems I would like to figure out if anyone else had same issues.

    Read the article

  • Connect to Google Talk without giving access to my full Google Account

    - by bneijt
    I would like to use Empathy as a Google Talk client. When I choose to go online, I'm asked to give [email protected] (Ubuntu) access to manage my online Photo's, Google Drive, Emails and Videos. I don't understand why Ubuntu has to have all these permissions on my Google account, does this mean Ubuntu will start syncing my Google account to Ubuntu One? Can I connect to Google Talk without granting access to my Videos, Emails and Photos to Ubuntu? What do you guys want with all my online things?

    Read the article

  • Enable remote VNC from the commandline?

    - by Stefan Lasiewski
    I have one computer running Ubuntu 10.04, and is running Vino, the default VNC server. I have a second Windows box which is running a VNC client, but does not have any X11 capabilities. I am ssh'd into the Ubuntu host from the Windows host, but I forgot to enable VNC access on the Ubuntu host. On the Ubuntu host, is there a way for me to enable VNC connections from the Ubuntu commandline? Update: As @koanhead says below, there is no man page for vino (e.g. man -k vino and info vino return nothing), and vino --help doesn't show any help).

    Read the article

  • Can't Boot, video drivers or x-server problem?

    - by ZacharyH
    I was uninstalling some programs that I installed to try and get my iPod touch working with Ubuntu (I gave up on that) when ubuntu just crashed. Now after I choose ubuntu in GRUB, it gives me a screen that says "Ubuntu is running in low-graphics mode: your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself" It was working just fine before I started to uninstall those programs. I think that I might have uninstalled something necessary to the system. If I click OK on the screen, it gives me options to reconfigure, troubleshoot, exit to console, or restart X. But no matter what I choose I still can't boot into ubuntu - I get stuck looking at the splash screen which stalls forever. I was receiving support from one of my mate's and he was doing something with the LiveCD, and now the message doesn't pop up any more, I just get stuck at a never ending splash screen. Any help would be appreciated, thanks!

    Read the article

  • nginx PPA does not work?

    - by Peter Smit
    I want to use the newest version of nginx, so I wanted to add the nginx/stable ppa sudo add-apt-repository ppa:nginx/stable sudo apt-get update However, the upgrade command says that there are no upgrades available and nginx is still the old version. Did I do something wrong? I use Ubuntu server 10.04 Lucid add-apt-repository output: $ sudo apt-add-repository ppa:nginx/stable Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 8B3981E7A6852F782CC4951600A6F0A3C300EE8C gpg: requesting key C300EE8C from hkp server keyserver.ubuntu.com gpg: key C300EE8C: "Launchpad Stable" not changed gpg: Total number processed: 1 gpg: unchanged: 1 apt-cache policy ouput: $ sudo apt-cache policy nginx nginx: Installed: 0.7.65-1ubuntu2 Candidate: 0.7.65-1ubuntu2 Version table: *** 0.7.65-1ubuntu2 0 500 http://eu-west-1.ec2.archive.ubuntu.com/ubuntu/ lucid/universe Packages 100 /var/lib/dpkg/status

    Read the article

  • How do software updates work?

    - by Jonas
    I would like to know how software updates work for my Ubuntu Server 10.10. I have been recommended to use apt-get install for installing new software and apt-get update for updating software for a Ubuntu Server in production use. Because these packages are tested for Ubuntu in contrast to download source code and compile the software on the box. But on my Ubuntu Server 10.10, I don't get the latest stable version of PostgreSQL (9) or the latest stable version of Nginx (8) using apt-get install. So how is this working, will these software be updated when I later run apt-get update or do I have to later run apt-get install again, or do I have to wait for the next release of Ubuntu to get them? And are patches and security updates managed in the same way? Or can they be updated automatically? If there is such a setting, how do I check what my system is using?

    Read the article

< Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >