Search Results

Search found 23435 results on 938 pages for 'i give terrible advice'.

Page 462/938 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• SQLAuthority News – Memories at Anniversary of SQL Wait Stats Book

  - by pinaldave

  SQL Wait Stats About a year ago, I had very proud moment. I had published my second book SQL Server Wait Stats with me as a primary author. It has been a long journey since then. The book got great response and it was widely accepted in the community. It was first of its kind of book written specifically on Wait Stats and Performance. The book was based on my earlier month long series written on the same subject SQL Server Wait Stats. Today, on the anniversary of the book, lots of things come to my mind let me share a few here. Idea behind Blog Series A very common question I often receive is why I wrote a 30 day series on Wait Stats. There were two reasons for it. 1) I have been working with SQL Server for a long time and have troubleshoot more than hundreds of SQL Server which are related to performance tuning. It was a great experience and it taught me a lot of new things. I always documented my experience. After a while I found that I was able to completely rely on my own notes when I was troubleshooting any servers. It is right then I decided to document my experience for the community. 2) While working with wait stats there were a few things, which I thought I knew it well as they were working. However, there was always a fear in the back of mind that what happens if what I believed was incorrect and I was on the wrong path all the time. There was only one way to get it validated. Put it out in front community with my understanding and request further help to improve my understanding. It worked, it worked beautifully. I received plenty of conversations, emails and comments. I refined my content based on various conversations and make it more relevant and near accurate. I guess above two are the major reasons for beginning my journey on writing Wait Stats blog series. Idea behind Book After writing a blog series there was a good amount of request I keep on receiving that I should convert it to eBook or proper book as reading blog posts is great but it goes not give a comprehensive understanding of the subject. The very common feedback from users who were beginning the subject that they will prefer to read it in a structured method. After hearing the feedback for more than 4 months, I decided to write a book based on the blog posts. When I envisioned book, I wanted to make sure this book addresses the wait stats concepts from the fundamentals and fill the gaps of blogs I wrote earlier. Rick Morelan and Joes 2 Pros Team I must acknowledge my co-author Rick Morelan for his unconditional support in writing this book. I had already authored one book before I published this book. The experience to write the book was out of the world. Writing blog posts are much much easier than writing books. The efforts it takes to write a book is 100 times more even though the content is ready. I could have not done it myself if there was not tremendous support of my co-author and editor’s team. We spend days and days researching and discussing various concepts covered in the book. When we were in doubt we reached out to experts as well did a practical reproduction of the scenarios to validate the concepts and claims. After continuous 3 months of hard work we were able to get this book out in the community. September 1st – the lucky day Well, we had to select any day to publish the books. When book was completed in August last week we felt very glad. We all had worked hard and having a sample draft book in hand was feeling like having a newborn baby in our hand. Every time my books are published I feel the same joy which I had when my daughter was born. The feeling of holding a new book in hand is the (almost) same feeling as holding newborn baby. I am excited. For me September 1st has been the luckiest day in mind life. My daughter Shaivi was born on September 1st. Since then every September first has been excellent day and have taken me to the next step in life. I believe anything and everything I do on September 1st it is turning out to be successful and blessed. Rick and I had finished a book in the last week of August. We sent it to the publisher (printer) and asked him to take the book live as soon as possible. We did not decide on any date as we wanted the book to get out as fast as it can. Interesting enough, the publisher/printer selected September 1st for publishing the book. He published the book on 1st September and I knew it at the same time that this book will go next level. Book Model – The Most Beautiful Girl We were done with book. We had no budget left for marketing. Rick and I had a long conversation regarding how to spread the words for the book so it can reach to many people. While we were talking about marketing Rick come up with the idea that we should hire a most beautiful girl around who acknowledge our book and genuinely care for book. It was a difficult task and Rick asked me to find a more beautiful girl. I am a father and the most beautiful girl for me my daughter. This was not a difficult task for me. Rick had given me task to find the most beautiful girl and I just could not think of anyone else than my own daughter. I still do not know what Rick thought about this idea but I had already made up my mind. You can see the detailed blog post here. The Fun Experiments Book Signing Event We had lots of fun moments along this book. We have given away more books to people for free than we have sold them actually. We had done book signing events, contests, and just plain give away when we found people can be benefited from this book. There was never an intention to make money and get rich. We just wanted that more and more people know about this new concept and learn from it. Today when I look back to the earnings there is nothing much we have earned if you talk about dollars. However the best reward which we have received is the satisfaction and love of community. The amount of emails, conversations we have so far received for this book is over thousands. We had fun writing this book, it was indeed a very satisfying journey. I have earned lots of friends while learning and exploring. Availability The book is one year old but still very relevant when it is about performance tuning. It is available at various online book stores. If you have read the book, do let me know what you think of it. Amazon | Kindle | Flipkart | Indiaplaza Reference:  Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority, SQLAuthority Book Review, T SQL, Technology

  Read the article

• Code Contracts: Hiding ContractException

  - by DigiMortal

  It’s time to move on and improve my randomizer I wrote for an example of static checking of code contracts. In this posting I will modify contracts and give some explanations about pre-conditions and post-conditions. Also I will show you how to avoid ContractExceptions and how to replace them with your own exceptions. As a first thing let’s take a look at my randomizer. public class Randomizer {     public static int GetRandomFromRange(int min, int max)     {         var rnd = new Random();         return rnd.Next(min, max);     }       public static int GetRandomFromRangeContracted(int min, int max)     {         Contract.Requires(min < max, "Min must be less than max");           var rnd = new Random();         return rnd.Next(min, max);     } } We have some problems here. We need contract for method output and we also need some better exception handling mechanism. As ContractException as type is hidden from us we have to switch from ContractException to some other Exception type that we can catch. Adding post-condition Pre-conditions are contracts for method’s input interface. Read it as follows: pre-conditions make sure that all conditions for method’s successful run are met. Post-conditions are contracts for output interface of method. So, post-conditions are for output arguments and return value. My code misses the post-condition that checks return value. Return value in this case must be greater or equal to minimum value and less or equal to maximum value. To make sure that method can run only the correct value I added call to Contract.Ensures() method. public static int GetRandomFromRangeContracted(int min, int max) {     Contract.Requires(min < max, "Min must be less than max");       Contract.Ensures(         Contract.Result<int>() >= min &&         Contract.Result<int>() <= max,         "Return value is out of range"     );       var rnd = new Random();     return rnd.Next(min, max); } I think that the line I added does not need any further comments. Avoiding ContractException for input interface ContractException lives in hidden namespace and we cannot see it at design time. But it is common exception type for all contract exceptions that we do not switch over to some other type. The case of Contract.Requires() method is simple: we can tell it what kind of exception we need if something goes wrong with contract it ensures. public static int GetRandomFromRangeContracted(int min, int max) {     Contract.Requires<ArgumentOutOfRangeException>(         min < max,         "Min must be less than max"     );       Contract.Ensures(         Contract.Result<int>() >= min &&         Contract.Result<int>() <= max,         "Return value is out of range"     );       var rnd = new Random();     return rnd.Next(min, max); } Now, if we violate the input interface contract giving min value that is not less than max value we get ArgumentOutOfRangeException. Avoiding ContractException for output interface Output interface is more complex to control. We cannot give exception type there and hope that this type of exception will be thrown if something goes wrong. Instead we have to use delegate that gathers information about problem and throws the exception we expect to be thrown. From documentation you can find the following example about the delegate I mentioned. Contract.ContractFailed += (sender, e) => {     e.SetHandled();     e.SetUnwind(); // cause code to abort after event     Assert.Fail(e.FailureKind.ToString() + ":" + e.DebugMessage); }; We can use this delegate to throw the Exception. Let’s move the code to separate method too. Here is our method that uses now ContractException hiding. public static int GetRandomFromRangeContracted(int min, int max) {     Contract.Requires(min < max, "Min must be less than max");       Contract.Ensures(         Contract.Result<int>() >= min &&         Contract.Result<int>() <= max,         "Return value is out of range"     );     Contract.ContractFailed += Contract_ContractFailed;       var rnd = new Random();     return rnd.Next(min, max)+1000; } And here is the delegate that creates exception. public static void Contract_ContractFailed(object sender,     ContractFailedEventArgs e) {     e.SetHandled();     e.SetUnwind();       throw new Exception(e.FailureKind.ToString() + ":" + e.Message); } Basically we can do in this delegate whatever we like to do with output interface errors. We can even introduce our own contract exception type. As you can see later then ContractFailed event is very useful at unit testing.

  Read the article

• Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CD

  - by Trevor Bekolay

  Accidentally deleting a file is a terrible feeling. Not being able to boot into Windows and undelete that file makes that even worse. Fortunately, you can recover deleted files on NTFS hard drives from an Ubuntu Live CD. To show this process, we created four files on the desktop of a Windows XP machine, and then deleted them. We then booted up the same machine with the bootable Ubuntu 9.10 USB Flash Drive that we created last week. Once Ubuntu 9.10 boots up, open a terminal by clicking Applications in the top left of the screen, and then selecting Accessories > Terminal. To undelete our files, we first need to identify the hard drive that we want to undelete from. In the terminal window, type in: sudo fdisk –l and press enter. What you’re looking for is a line that ends with HPSF/NTFS (under the heading System). In our case, the device is “/dev/sda1”. This may be slightly different for you, but it will still begin with /dev/. Note this device name. If you have more than one hard drive partition formatted as NTFS, then you may be able to identify the correct partition by the size. If you look at the second line of text in the screenshot above, it reads “Disk /dev/sda: 136.4 GB, …” This means that the hard drive that Ubuntu has named /dev/sda is 136.4 GB large. If your hard drives are of different size, then this information can help you track down the right device name to use. Alternatively, you can just try them all, though this can be time consuming for large hard drives. Now that you know the name Ubuntu has assigned to your hard drive, we’ll scan it to see what files we can uncover. In the terminal window, type: sudo ntfsundelete <HD name> and hit enter. In our case, the command is: sudo ntfsundelete /dev/sda1 The names of files that can recovered show up in the far right column. The percentage in the third column tells us how much of that file can be recovered. Three of the four files that we originally deleted are showing up in this list, even though we shut down the computer right after deleting the four files – so even in ideal cases, your files may not be recoverable. Nevertheless, we have three files that we can recover – two JPGs and an MPG. Note: ntfsundelete is immediately available in the Ubuntu 9.10 Live CD. If you are in a different version of Ubuntu, or for some other reason get an error when trying to use ntfsundelete, you can install it by entering “sudo apt-get install ntfsprogs” in a terminal window. To quickly recover the two JPGs, we will use the * wildcard to recover all of the files that end with .jpg. In the terminal window, enter sudo ntfsundelete <HD name> –u –m *.jpg which is, in our case, sudo ntfsundelete /dev/sda1 –u –m *.jpg The two files are recovered from the NTFS hard drive and saved in the current working directory of the terminal. By default, this is the home directory of the current user, though we are working in the Desktop folder. Note that the ntfsundelete program does not make any changes to the original NTFS hard drive. If you want to take those files and put them back in the NTFS hard drive, you will have to move them there after they are undeleted with ntfsundelete. Of course, you can also put them on your flash drive or open Firefox and email them to yourself – the sky’s the limit! We have one more file to undelete – our MPG. Note the first column on the far left. It contains a number, its Inode. Think of this as the file’s unique identifier. Note this number. To undelete a file by its Inode, enter the following in the terminal: sudo ntfsundelete <HD name> –u –i <Inode> In our case, this is: sudo ntfsundelete /dev/sda1 –u –i 14159 This recovers the file, along with an identifier that we don’t really care about. All three of our recoverable files are now recovered. However, Ubuntu lets us know visually that we can’t use these files yet. That’s because the ntfsundelete program saves the files as the “root” user, not the “ubuntu” user. We can verify this by typing the following in our terminal window: ls –l We want these three files to be owned by ubuntu, not root. To do this, enter the following in the terminal window: sudo chown ubuntu <Files> If the current folder has other files in it, you may not want to change their owner to ubuntu. However, in our case, we only have these three files in this folder, so we will use the * wildcard to change the owner of all three files. sudo chown ubuntu * The files now look normal, and we can do whatever we want with them. Hopefully you won’t need to use this tip, but if you do, ntfsundelete is a nice command-line utility. It doesn’t have a fancy GUI like many of the similar Windows programs, but it is a powerful tool that can recover your files quickly. See ntfsundelete’s manual page for more detailed usage information Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDUse Ubuntu Live CD to Backup Files from Your Dead Windows ComputerCreate a Bootable Ubuntu 9.10 USB Flash DriveCreate a Bootable Ubuntu USB Flash Drive the Easy WayGuide to Using Check Disk in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• What's up with LDoms: Part 4 - Virtual Networking Explained

  - by Stefan Hinker

  I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking.  Basic connectivity as we've seen it in the first, simple example, is easy enough.  But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now.   In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only.  Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices.  The virtual switch should be seen just like a real ethernet switch.  It "runs" in the service domain and moves ethernet packets back and forth.  A virtual network device is plumbed in the guest domain.  It corresponds to a physical network device in the real world.  There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch.  In the virtual world, you do the same:  You create a virtual network device for your guest and connect it to a virtual switch in a service domain.  The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices.  Don't be confused, it's rather straight forward, really.  Let's start with the simple case, and work our way to some more sophisticated options later on.  In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment.  In the real world, you'd connect each of these systems to the same ethernet switch.  So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2.  In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch.  We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch.  They can now communicate with each other and with any system reachable via nxge2.  If primary were running Solaris 10, communication with the guests would not be possible.  This is different with Solaris 11, please see the Admin Guide for details.  Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one.  It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there.  However, if we want to do this manually, we can also do that.  (One reason might be firewall rules that work on MAC addresses.)  So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver.  In Solaris 10, they'd appear as "vnet0".  Solaris 11 would apply it's usual vanity naming scheme.  We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal.  In many cases, using Jumbo Frames helps increase throughput performance.  By default, these interfaces will run with the standard ethernet MTU of 1500 bytes.  To change this,  it is usually sufficient to set the desired MTU for the virtual switch.  This will automatically set the same MTU for all vnet devices attached to that switch.  Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000.  Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times.  As always, keeping a configuration simple will help avoid errors of all kind.  Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable.  And as such, this concept needs to be carried over into the virtual world.  Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44.  There might also be other VLANs on the wire, but the vswitch will ignore all those packets.  We also have two vnet devices, one for mars and one for venus.  Venus will see traffic from VLANs 33 and 44 only.  For VLAN 44, venus will need to configure a tagged interface "vnet44000".  For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic.  This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33.  Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44.  On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system.  It's the "id=<somenumber>" option available for both vswitches and vnet devices.  Normally, Solaris in the guest would enumerate network devices sequentially.  However, it has ways of remembering this initial numbering.  This is good in the physical world.  In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change.  Configuration confusion will follow suit.  To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far.  Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above.  I hope this is useful and, as always, I welcome any comments.

  Read the article

• The hidden cost of interrupting knowledge workers

  - by Piet

  The November issue of pragpub has an interesting article on interruptions. The article is written by Brian Tarbox, who also mentions the article on his blog. I like the subtitle: ‘Simple Strategies for Avoiding Dumping Your Mental Stack’. Brian talks about the effective cost of interrupting a ‘knowledge worker’, often with trivial questions or distractions. In the eyes of the interruptor, the interruption only costs the time the interrupted had to listen to the question and give an answer. However, depending on what the interrupted was doing at the time, getting fully immersed in their task again might take up to 15-20 minutes. Enough interruptions might even cause a knowledge worker to mentally call it a day. According to this article interruptions can consume about 28% of a knowledge worker’s time, translating in a $588 billion loss for US companies each year. Looking for a new developer to join your team? Ever thought about optimizing your team’s environment and the way they work instead? Making non knowledge workers aware You can’t. Well, I haven’t succeeded yet. And believe me: I’ve tried. When you’ve got a simple way to really increase your productivity (’give me 2 hours of uninterrupted time a day’) it wouldn’t be right not to tell your boss or team-leader about it. The problem is: only productive knowledge workers seem to understand this. People who don’t fall into this category just seem to think you’re joking, being arrogant or anti-social when you tell them the interruptions can really have an impact on your productivity. Also, knowledge workers often work in a very concentrated mental state which is described here as: It is the same mindfulness as ecstatic lovemaking, the merging of two into a fluidly harmonious one. The hallmark of flow is a feeling of spontaneous joy, even rapture, while performing a task. Yes, coding can be addictive and if you’re interrupting a programmer at the wrong moment, you’re effectively bringing down a junkie from his high in just a few seconds. This can result in seemingly arrogant, almost aggressive reactions. How to make people aware of the production-cost they’re inflicting: I’ve been often pondering that question myself. The article suggests that solutions based on that question never seem to work. To be honest: I’ve never even been able to find a half decent solution for this question. People who are not in this situations just don’t understand the issue, no matter how you try to explain it. Fun (?) thing I’ve noticed: Programmers or IT people in general who don’t get this are often the kind of people who just don’t get anything done. Interrupt handling (interruption management?) IRL Have non-urgent questions handled in a non-interruptive way It helps a bit to educate people into using non-interruptive ways to ask questions: “duh, I have no idea, but I’m a bit busy here now could you put it in an email so I don’t forget?”. Eventually, a considerable amount of people will skip interrupting you and just send an email right away. Some stubborn-headed people however will continue to just interrupt you, saying “you’re 10 meters from my desk, why can’t we just talk?”. Just remember to disable your email notifications, it can be hard to resist opening your email client when you know a new email just arrived. Use Do Not Disturb signals When working in a group of programmers, often the unofficial sign you can only be interrupted for something important is to put on headphones. And when the environment is quiet enough, often people aren’t even listening to music. Otherwise music can help to block the indirect distractions (someone else talking on the phone or tapping their feet). You might get a “they’re all just surfing and listening to music”-reaction from outsiders though. Peopleware talks about a team where the no-interruption sign was placing a shawl on the desk. If I remember correctly, I am unable to locate my copy of this really excellent must-read book. If you have all standardized on the same IM tool, maybe that tool has a ‘do not disturb’ setting. Also some phone-systems have a ‘DND’ (do not disturb) setting. Hide Brian offers a number of good suggestions, some obvious like: hide away somewhere they can’t find you. Not sure how long it’ll be till someone thinks you’re just taking a nap somewhere though. Also, this often isn’t possible or your boss might not understand this. And if you really get caught taking a nap, make sure to explain that your were powernapping. Counter-act interruptions Another suggestion he offers is when you’re being interrupted to just hold up your hand, blocking the interruption, and at least giving you time to finish your sentence or your block/line of code. The last suggestion works more as a way to make it obvious to the interruptor that they really are interrupting your work and to offload some of the cost on the interruptor. In practice, this can also helps you cool down a bit so you don’t start saying nasty things to the interruptor. Unfortunately I’ve sometimes been confronted with people who just ignore this signal and keep talking, as if they’re sure that whatever they’ve got to say is really worth listening to and without a doubt more important than anything you might be doing. This behaviour usually leaves me speechless (not good when someone just asked a question). I’ve noticed that these people are usually also the first to complain when being interrupted themselves. They’re generally not very liked as colleagues, so try not to imitate their behaviour. TDD as a way to minimize recovery time I don’t like Test Driven Development. Mainly for only one reason: It interrupts flow. At least, that’s what it does for me, but maybe I’m just not grown used to TDD yet. BUT a positive effect TDD has on me when I have to work in an interruptive environment and can’t really get into the ‘flow’ (also supposedly called ‘the zone’ by software developers, although I’ve never heard it 1st hand), TDD helps me to concentrate on the tasks at hand and helps me to get back at work after an interruption. I feel when using TDD, I can get by without the need for being totally ‘in’ the project and I can be reasonably productive without obtaining ‘flow’. Do you have a suggestion on how to make people aware of the concept of ‘flow’ and the cost of interruptions? (without looking like an arrogant ass or a weirdo)

  Read the article

• Create PDF document using iTextSharp in ASP.Net 4.0 and MemoryMappedFile

  - by sreejukg

  In this article I am going to demonstrate how ASP.Net developers can programmatically create PDF documents using iTextSharp. iTextSharp is a software component, that allows developers to programmatically create or manipulate PDF documents. Also this article discusses the process of creating in-memory file, read/write data from/to the in-memory file utilizing the new feature MemoryMappedFile. I have a database of users, where I need to send a notice to all my users as a PDF document. The sending mail part of it is not covered in this article. The PDF document will contain the company letter head, to make it more official. I have a list of users stored in a database table named “tblusers”. For each user I need to send customized message addressed to them personally. The database structure for the users is give below. id Title Full Name 1 Mr. Sreeju Nair K. G. 2 Dr. Alberto Mathews 3 Prof. Venketachalam Now I am going to generate the pdf document that contains some message to the user, in the following format. Dear <Title> <FullName>, The message for the user. Regards, Administrator Also I have an image, bg.jpg that contains the background for the document generated. I have created .Net 4.0 empty web application project named “iTextSharpSample”. First thing I need to do is to download the iTextSharp dll from the source forge. You can find the url for the download here. http://sourceforge.net/projects/itextsharp/files/ I have extracted the Zip file and added the itextsharp.dll as a reference to my project. Also I have added a web form named default.aspx to my project. After doing all this, the solution explorer have the following view. In the default.aspx page, I inserted one grid view and associated it with a SQL Data source control that bind data from tblusers. I have added a button column in the grid view with text “generate pdf”. The output of the page in the browser is as follows. Now I am going to create a pdf document when the user clicking on the Generate PDF button. As I mentioned before, I am going to work with the file in memory, I am not going to create a file in the disk. I added an event handler for button by specifying onrowcommand event handler. My gridview source looks like <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" Width="481px" CellPadding="4" ForeColor="#333333" GridLines="None" onrowcommand="Generate_PDF" > ………………………………………………………………………….. ………………………………………………………………………….. </asp:GridView> In the code behind, I wrote the corresponding event handler. protected void Generate_PDF(object sender, GridViewCommandEventArgs e) { // The button click event handler code. // I am going to explain the code for this section in the remaining part of the article } The Generate_PDF method is straight forward, It get the title, fullname and message to some variables, then create the pdf using these variables. The code for getting data from the grid view is as follows // get the row index stored in the CommandArgument property int index = Convert.ToInt32(e.CommandArgument); // get the GridViewRow where the command is raised GridViewRow selectedRow = ((GridView)e.CommandSource).Rows[index]; string title = selectedRow.Cells[1].Text; string fullname = selectedRow.Cells[2].Text; string msg = @"There are some changes in the company policy, due to this matter you need to submit your latest address to us. Please update your contact details / personnal details by visiting the member area of the website. ................................... "; since I don’t want to save the file in the disk, I am going the new feature introduced in .Net framework 4, called Memory-Mapped Files. Using Memory-Mapped mapped file, you can created non-persisted memory mapped files, that are not associated with a file in a disk. So I am going to create a temporary file in memory, add the pdf content to it, then write it to the output stream. To read more about MemoryMappedFile, read this msdn article http://msdn.microsoft.com/en-us/library/dd997372.aspx The below portion of the code using MemoryMappedFile object to create a test pdf document in memory and perform read/write operation on file. The CreateViewStream() object will give you a stream that can be used to read or write data to/from file. The code is very straight forward and I included comment so that you can understand the code. using (MemoryMappedFile mmf = MemoryMappedFile.CreateNew("test1.pdf", 1000000)) { // Create a new pdf document object using the constructor. The parameters passed are document size, left margin, right margin, top margin and bottom margin. iTextSharp.text.Document d = new iTextSharp.text.Document(PageSize.A4, 72,72,172,72); //get an instance of the memory mapped file to stream object so that user can write to this using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { // associate the document to the stream. PdfWriter.GetInstance(d, stream); /* add an image as bg*/ iTextSharp.text.Image jpg = iTextSharp.text.Image.GetInstance(Server.MapPath("Image/bg.png")); jpg.Alignment = iTextSharp.text.Image.UNDERLYING; jpg.SetAbsolutePosition(0, 0); //this is the size of my background letter head image. the size is in points. this will fit to A4 size document. jpg.ScaleToFit(595, 842); d.Open(); d.Add(jpg); d.Add(new Paragraph(String.Format("Dear {0} {1},", title, fullname))); d.Add(new Paragraph("\n")); d.Add(new Paragraph(msg)); d.Add(new Paragraph("\n")); d.Add(new Paragraph(String.Format("Administrator"))); d.Close(); } //read the file data byte[] b; using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { BinaryReader rdr = new BinaryReader(stream); b = new byte[mmf.CreateViewStream().Length]; rdr.Read(b, 0, (int)mmf.CreateViewStream().Length); } Response.Clear(); Response.ContentType = "Application/pdf"; Response.BinaryWrite(b); Response.End(); } Press ctrl + f5 to run the application. First I got the user list. Click on the generate pdf icon. The created looks as follows. Summary: Creating pdf document using iTextSharp is easy. You will get lot of information while surfing the www. Some useful resources and references are mentioned below http://itextsharp.com/ http://www.mikesdotnetting.com/Article/82/iTextSharp-Adding-Text-with-Chunks-Phrases-and-Paragraphs http://somewebguy.wordpress.com/2009/05/08/itextsharp-simplify-your-html-to-pdf-creation/ Hope you enjoyed the article.

  Read the article

• How to Upload a file from client to server using OFBIZ?

  - by SIVAKUMAR.J

  I'm new to ofbiz so try to keep your answer as simple as possibly. If you can give examples that would be kind. My problem is I created a project inside the ofbiz/hot-deploy folder namely productionmgntSystem. Inside the folder ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem I created a file app_details_1.ftl. The following are the code of this file <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Insert title here</title> <script TYPE="TEXT/JAVASCRIPT" language=""JAVASCRIPT"> function uploadFile() { //alert("Before calling upload.jsp"); window.location='<@ofbizUrl>testing_service1</@ofbizUrl>' } </script> </head> <!-- <form action="<@ofbizUrl>testing_service1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> --> <form action="<@ofbizUrl>logout1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> <center style="height: 299px; "> <table border="0" style="height: 177px; width: 788px"> <tr style="height: 115px; "> <td style="width: 103px; "> <td style="width: 413px; "><h1>APPLICATION DETAILS</h1> <td style="width: 55px; "> </tr> <tr> <td style="width: 125px; ">Application name : </td> <td> <input name="app_name_txt" id="txt_1" value=" " /> </td> </tr> <tr> <td style="width: 125px; ">Excell sheet &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;: </td> <td> <input type="file" name="filename"/> </td> </tr> <tr> <td> <!-- <input type="button" name="logout1_cmd" value="Logout" onclick="logout1()"/> --> <input type="submit" name="logout_cmd" value="logout"/> </td> <td> <!-- <input type="submit" name="upload_cmd" value="Submit" /> --> <input type="button" name="upload1_cmd" value="Upload" onclick="uploadFile()"/> </td> </tr> </table> </center> </form> </html> the following coding is present in the file ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem\WEB-INF\controller.xml ...... ....... ........ <request-map uri="testing_service1"> <security https="true" auth="true"/> <event type="java" path="org.ofbiz.productionmgntSystem.web_app_req.WebServices1" invoke="testingService"/> <response name="ok" type="view" value="ok_view"/> <response name="exception" type="view" value="exception_view"/> </request-map> .......... ............ .......... <view-map name="ok_view" type="ftl" page="ok_view.ftl"/> <view-map name="exception_view" type="ftl" page="exception_view.ftl"/> ................ ............. ............. The following are the coding present in the file ofbiz\hot-deploy\productionmgntSystem\src\org\ofbiz\productionmgntSystem\web_app_req\WebServices1.java package org.ofbiz.productionmgntSystem.web_app_req; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.DataInputStream; import java.io.FileOutputStream; import java.io.IOException; public class WebServices1 { public static String testingService(HttpServletRequest request, HttpServletResponse response) { //int i=0; String result="ok"; System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- Start"); String contentType=request.getContentType(); System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- contentType : "+contentType); String str=new String(); // response.setContentType("text/html"); //PrintWriter writer; if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0)) { System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) after if (contentType != null)"); try { // writer=response.getWriter(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try Start"); DataInputStream in = new DataInputStream(request.getInputStream()); int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead,formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\")+ 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1,contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length; //creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream("/"+saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try End"); } catch(IOException ioe) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch IOException"); //ioe.printStackTrace(); return("exception"); } catch(Exception ex) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch Exception"); return("exception"); } } else { System.out.println("\n\n\t********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) else part"); result="exception"; } System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- End"); return(result); } } I want to upload a file to the server. The file is get from user " tag in the "app_details_1.ftl" file & it is updated into the server by using the method "testingService(HttpServletRequest request, HttpServletResponse response)" in the class "WebServices1". But the file is not uploaded. Give me a good solution for uploading a file to the server.

  Read the article

• Guide to Downloading Oracle Fusion Middleware 11g Products

  - by Daniel Mortimer

  IntroductionThe idea of writing a blog about downloading software seems a bit strange .. right? After all, surely just give me the web download link and away I go!? Unfortunately, life is not so simple if you are a DBA or Systems Administrator tasked with staging Oracle Fusion Middleware 11g products for your chosen business technology stack. Here are the challenges: Oracle Fusion Middleware is not a single product, it is a family of products - a media pack with many many "disks" - which ones do I pick? Are the products I pick certified / supported on my chosen platform? Which download site do I use? I need to be on the latest and greatest - how do I get hold of the latest product patch set? The purpose of this blog is to give you a roadmap to get you through these challenges. Oracle Fusion Middleware 11g - A Product SuiteThe first thing to appreciate is that Oracle Fusion Middleware 11g is not a single product. It is a product suite, an umbrella label for many products. Typically you don't download the whole media pack - well not unless you want to stage 124 Parts - a total of 68 Gig  - instead you pick the pieces that are required for your chosen Middleware solution. Therefore, you need to research / understand which products are required to build your solution. In this respect, before you go looking for the software pick and persue the product guide from the table below which matches your situation:  Installing a New / Vanilla FMW 11g architecture Oracle Fusion Middleware Installation Planning Guide 11g  Upgrading Oracle Application Server 10g to FMW 11g Oracle Fusion Middleware Upgrade Planning Guide 11g  Patching an existing FMW 11g architecture Oracle Fusion Middleware Patching Guide 11g Certification Information Ok, so now you have an idea of what Fusion Middleware products you need. It's time to check whether these products are certified against your chosen platform. There are two places to find this information:My Oracle Support Certification Tab PageFigure 1.1 My Oracle Support Certification Tab Page - "Search on SOA Suite" Figure 1.2 My Oracle Support Certification Tab Page - "SOA Suite Search Result" The FMW 11g Certification Central Hub (in the format of xls spreadsheet)Figure 2: Screenshot of FMW 11g Release 1 Certification xls spreadsheet Hints / Tips: Fusion Middleware 11g certification information has only recently been added into the Certification Tab page and I think it is the more friendly way to access the information. However, due to some restrictions with the Certification Tab page interface some of the more, let's say obscure certification information, is still to be only found in the Certification spreadsheet. Be aware that to find certification information via the My Oracle Support Certification Tab page you must enter the FMW 11g product name e.g. "Oracle SOA Suite". Do NOT enter "Oracle Fusion Middleware". The certification information does not exist at this product suite level.  For example, if you are building a solution which includes Oracle SOA Suite Oracle WebCenter then you will have to look up the certification information for each product in turn.After choosing the product name, select the latest patch set version. This will not only tell you whether your chosen product is available at that patch set version but provide the certification information relevant to that version.  If the product is not available under the latest patch set version, seek the information under previous patch set versions. Important: Make a careful note of the Oracle WebLogic Server version which is certified with your chosen product and patch set version. Oracle WebLogic Server is the core component of a Oracle Fusion Middleware 11g home. It is important therefore to ensure later on that you download the version of Oracle WebLogic Server which is compatible and certified with your chosen product and patch set version.Also - sorry to state the obvious, but please do not take certification information from the screenshots above. The screenshots are only good for the time they were entered into the blog. To ensure you have the latest information, interactively look up the certification details. For more information about finding certification information, bookmark and readMy Oracle Support Certification Tool for Oracle Fusion Middleware Products [Doc ID 1368736.1]How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion Middleware 11g [Doc ID 431578.1] Downloading the Software Now you should be ready to download the software. There are two download locations Oracle Software Delivery Cloud (formerly known as E-Delivery)Figure 3 - Screenshot of Fusion Middleware Download from Delivery CloudOracle Fusion Middleware Download Page on Oracle Technology NetworkFigure 4 - Screenshot of OTN Product Download Screen Hints / Tips: Your choice of download location should be primarily driven by your licensing needs. Take note of the wording on the OTN site - to quote:"The downloads below are provided for evaluators under the OTN License Agreement. Licensed customers should download their software via our Oracle Software Delivery Cloud site, which offers different license terms."However, it has to be said that the presentation of the most of the product download pages on OTN does make the job easier. The Software Delivery Cloud provides you with a flat list of the Oracle Fusion Middleware 11g media pack. You have to know what you are looking for and pick out the right pieces :-( The OTN product download pages present not only the download for the product you want but also its dependencies such as WebLogic Server and Repository Creation Utility. So, even if your licensing requirements drive you towards the cloud, it is still worthwhile checking the OTN pages if only as a guide to what you need to pick out from the flat list found on the cloud site. Latest Patch Set This is an area which may cause you confusion - especially if you are more familiar with the Oracle Application Server 10g patching story. From Patch Set 11.1.1.6 and higher, the majority of FMW 11g products (N.B there are exceptions) provide installers which can be used both to update existing FMW 11g product installs or build brand new ones. This is good news because, unless you are dealing with one of the exceptions, it means you do not have to download base software and a patch set. At the time of the writing, the two significant exceptions are: Portal/Forms/Reports/Discoverer 11g Release 1 (11.1.1.x) Identity Access Management 11g Release 1 (11.1.1.x) The other key message here is ensure you are grabbing a version of Oracle WebLogic Server which is compatible with your chosen product patch set version. Get this wrong and you will hit errors / problems at AS Instance Configuration Time.The go to place is this document - Oracle Fusion Middleware Download, Installation, and Configuration Readme FilesIn fact, this README document pretty much takes you through what I have blogged above. The only thing is you need to know which README to choose, and that's why planning your FMW 11g technology stack and viewing certification information comes into play beforehand. And Finally As the Oracle Fusion Middleware Download, Installation, and Configuration Readme Files states don't forget to check FMW 11g System Requirements FMW 11g Product Interoperability

  Read the article

• Creating A SharePoint Parent/Child List Relationship&ndash; SharePoint 2010 Edition

  - by Mark Rackley

  Hey blog readers… It has been almost 2 years since I posted my most read blog on creating a Parent/Child list relationship in SharePoint 2007: Creating a SharePoint List Parent / Child Relationship - Out of the Box And then a year ago I improved on my method and redid the blog post… still for SharePoint 2007: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX Since then many of you have been asking me how to get this to work in SharePoint 2010, and frankly I have just not had time to look into it. I wish I could have jumped into this sooner, but have just recently began to look at it. Well.. after all this time I have actually come up with two solutions that work, neither of them are as clean as I’d like them to be, but I wanted to get something in your hands that you can start using today. Hopefully in the coming weeks and months I’ll be able to improve upon this further and give you guys some better options. For the most part, the process is identical to the 2007 process, but you have probably found out that the list view web parts in 2010 behave differently, and getting the Parent ID to your new child form can be a pain in the rear (at least that’s what I’ve discovered). Anyway, like I said, I have found a couple of solutions that work. If you know of a better one, please let us know as it bugs me that this not as eloquent as my 2007 implementation. Getting on the same page First thing I’d recommend is recreating this blog: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX in SharePoint 2010… There are some vague differences, but it’s basically the same…  Here’s a quick video of me doing this in SP 2010: Creating Lists necessary for this blog post Now that you have the lists created, lets set up the New Time form to use a QueryString variable to populate the Parent ID field: Creating parameters in Child’s new item form to set parent ID Did I talk fast enough through both of those videos? Hopefully by now that stuff is old hat to you, but I wanted to make sure everyone could get on the same page.  Okay… let’s get started. Solution 1 – XSLTListView with Javascript This solution is the more elegant of the two, however it does require the use of a little javascript.  The other solution does not use javascript, but it also doesn’t use the pretty new SP 2010 pop-ups.  I’ll let you decide which you like better. The basic steps of this solution are: Inserted a Related Item View Insert a ContentEditorWebPart Insert script in ContentEditorWebPart that pulls the ID from the Query string and calls the method to insert a new item on the child entry form Hide the toolbar from data view to remove “add new item” link. Again, you don’t HAVE to use a CEWP, you could just put the javascript directly in the page using SPD.  Anyway, here is how I did it: Using Related Item View / JavaScript Here’s the JavaScript I used in my Content Editor Web Part: <script type="text/javascript"> function NewTime() { // Get the Query String values and split them out into the vals array var vals = new Object(); var qs = location.search.substring(1, location.search.length); var args = qs.split("&"); for (var i=0; i < args.length; i++) { var nameVal = args[i].split("="); var temp = unescape(nameVal[1]).split('+'); nameVal[1] = temp.join(' '); vals[nameVal[0]] = nameVal[1]; } var issueID = vals["ID"]; //use this to bring up the pretty pop up NewItem2(event,"http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID); //use this to open a new window //window.location="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID; } </script> Solution 2 – DataFormWebPart and exact same 2007 Process This solution is a little more of a hack, but it also MUCH more close to the process we did in SP 2007. So, if you don’t mind not having the pretty pop-up and prefer the comforts of what you are used to, you can give this one a try.  The basics steps are: Insert a DataFormWebPart instead of the List Data View Create a Parameter on DataFormWebPart to store “ID” Query String Variable Filter DataFormWebPart using Parameter Insert a link at bottom of DataForm Web part that points to the Child’s new item form and passes in the Parent Id using the Parameter. See.. like I told you, exact same process as in 2007 (except using the DataFormWeb Part). The DataFormWebPart also requires a lot more work to make it look “pretty” but it’s just table rows and cells, and can be configured pretty painlessly.  Here is that video: Using DataForm Web Part One quick update… if you change the link in this solution from: <tr> <td><a href="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}">Click here to create new item...</a> </td> </tr> to: <tr> <td> <a href="javascript:NewItem2(event,'http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}');">Click here to create new item...</a> </td> </tr> It will open up in the pretty pop up and act the same as solution one… So… both Solutions will now behave the same to the end user. Just depends on which you want to implement. That’s all for now… Remember in both solutions when you have them working, you can make the “IssueID” invisible to users by using the “ms-hidden” class (it’s my previous blog post on the subject up there). That’s basically all there is to it! No pithy or witty closing this time… I am sorry it took me so long to dive into this and I hope your questions are answered. As I become more polished myself I will try to come up with a cleaner solution that will make everyone happy… As always, thanks for taking the time to stop by.

  Read the article

• Integrating Flickr with ASP.Net application

  - by sreejukg

  Flickr is the popular photo management and sharing application offered by yahoo. The services from flicker allow you to store and share photos and videos online. Flicker offers strong API support for almost all services they provide. Using this API, developers can integrate photos to their public website. Since 2005, developers have collaborated on top of Flickr's APIs to build fun, creative, and gorgeous experiences around photos that extend beyond Flickr. In this article I am going to demonstrate how easily you can bring the photos stored on flicker to your website. Let me explain the scenario this article is trying to address. I have a flicker account where I upload photos and share in many ways offered by Flickr. Now I have a public website, instead of re-upload the photos again to public website, I want to show this from Flickr. Also I need complete control over what photo to display. So I went and referred the Flickr documentation and there is API support ready to address my scenario (and more… ). FlickerAPI for ASP.Net To Integrate Flicker with ASP.Net applications, there is a library available in CodePlex. You can find it here http://flickrnet.codeplex.com/ Visit the URL and download the latest version. The download includes a Zip file, when you unzip you will get a number of dlls. Since I am going to use ASP.Net application, I need FlickrNet.dll. See the screenshot of all the dlls, and there is a help file available in the download (.chm) for your reference. Once you have the dll, you need to use Flickr API from your website. I assume you have a flicker account and you are familiar with Flicker services. Arrange your photos using Sets in Flickr In flicker, you can define sets and add your uploaded photos to sets. You can compare set to photo album. A set is a logical collection of photos, which is an excellent option for you to categorize your photos. Typically you will have a number of sets each set having few photos. You can write application that brings photos from sets to your website. For the purpose of this article I already created a set Flickr and added some photos to it. Once you logged in to Flickr, you can see the Sets under the Menu. In the Sets page, you will see all the sets you have created. As you notice, you can see certain sample images I have uploaded just to test the functionality. Though I wish I couldn’t create good photos so please bear with me. I have created 2 photo sets named Blue Album and Red Album. Click on the image for the set, will take you to the corresponding set page. In the set “Red Album” there are 4 photos and the set has a unique ID (highlighted in the URL). You can simply retrieve the photos with the set id from your application. In this article I am going to retrieve the images from Red album in my ASP.Net page. For that First I need to setup FlickrAPI for my usage. Configure Flickr API Key As I mentioned, we are going to use Flickr API to retrieve the photos stored in Flickr. In order to get access to Flickr API, you need an API key. To create an API key, navigate to the URL http://www.flickr.com/services/apps/create/ Click on Request an API key link, now you need to tell Flickr whether your application in commercial or non-commercial. I have selected a non-commercial key. Now you need to enter certain information about your application. Once you enter the details, Click on the submit button. Now Flickr will create the API key for your application. Generating non-commercial API key is very easy, in couple of steps the key will be generated and you can use the key in your application immediately. ASP.Net application for retrieving photos Now we need write an ASP.Net application that display pictures from Flickr. Create an empty web application (I named this as FlickerIntegration) and add a reference to FlickerNet.dll. Add a web form page to the application where you will retrieve and display photos(I have named this as Gallery.aspx). After doing all these, the solution explorer will look similar to following. I have used the below code in the Gallery.aspx page. The output for the above code is as follows. I am going to explain the code line by line here. First it is adding a reference to the FlickrNet namespace. using FlickrNet; Then create a Flickr object by using your API key. Flickr f = new Flickr("<yourAPIKey>"); Now when you retrieve photos, you can decide what all fields you need to retrieve from Flickr. Every photo in Flickr contains lots of information. Retrieving all will affect the performance. For the demonstration purpose, I have retrieved all the available fields as follows. PhotoSearchExtras.All But if you want to specify the fields you can use logical OR operator(|). For e.g. the following statement will retrieve owner name and date taken. PhotoSearchExtras extraInfo = PhotoSearchExtras.OwnerName | PhotoSearchExtras.DateTaken; Then retrieve all the photos from a photo set using PhotoSetsGetPhotos method. I have passed the PhotoSearchExtras object created earlier. PhotosetPhotoCollection photos = f.PhotosetsGetPhotos("72157629872940852", extraInfo); The PhotoSetsGetPhotos method will return a collection of Photo objects. You can just navigate through the collection using a foreach statement. foreach (Photo p in photos) {     //access each photo properties } Photo class have lot of properties that map with the properties from Flickr. The chm documentation comes along with the CodePlex download is a great asset for you to understand the fields. In the above code I just used the following p.LargeUrl – retrieves the large image url for the photo. p.ThumbnailUrl – retrieves the thumbnail url for the photo p.Title – retrieves the Title of the photo p.DateUploaded – retrieves the date of upload Visual Studio intellisense will give you all properties, so it is easy, you can just try with Visual Studio intellisense to find the right properties you are looking for. Most of hem are self-explanatory. So you can try retrieving the required properties. In the above code, I just pushed the photos to the page. In real time you can use the retrieved photos along with JQuery libraries to create animated photo galleries, slideshows etc. Configuration and Troubleshooting If you get access denied error while executing the code, you need to disable the caching in Flickr API. FlickrNet cache the photos to your local disk when retrieved. You can specify a cache folder where the application need write permission. You can specify the Cache folder in the code as follows. Flickr.CacheLocation = Server.MapPath("./FlickerCache/"); If the application doesn’t have have write permission to the cache folder, the application will throw access denied error. If you cannot give write permission to the cache folder, then you must disable the caching. You can do this from code as follows. Flickr.CacheDisabled = true; Disabling cache will have an impact on the performance. Take care! Also you can define the Flickr settings in web.config file.You can find the documentation here. http://flickrnet.codeplex.com/wikipage?title=ExampleConfigFile&ProjectName=flickrnet Flickr is a great place for storing and sharing photos. The API access allows developers to do seamless integration with the photos uploaded on Flickr.

  Read the article

• Microsoft TechEd 2010 - Day 3 @ Bangalore

  - by sathya

  Microsoft TechEd 2010 - Day 3 @ Bangalore Sorry for my delayed post on day 3 because I had to travel from Blore to Chennai So I couldnt write for the past two days. On day 3 as usual we had lot of simultaneous tracks on various sessions. This day I choose the Your Data, Our Platform Track. It had sessions on the following 5 topics :   Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan Data Recovery / Consistency with CheckDB - by Vinod Kumar M Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam This was one of the superb sessions i have attended. He explained all the concepts in detail with a demo. The important thing in this is there is something called Data-Tier application project which is newly introduced in this VS2010 with which we can manage all our data along with our application inside our VS itself. We can create DB,Tables,Procs,Views etc. here itself and once we deploy it creates a compressed file called .dacpac which stores all the changes in Table Schema,Created procs, etc. on to that single file which reduces our (developer's) effort in preparing the deployment scripts and giving it to the DBA. It also has some policy configurations which can be managed easily by checking some rules like in outlook. For Ex : IF the SQL Server Version > 10 then deploy else dont. This rule specifies that even if we try to deploy on SQL Server DB with version less than 10 It will not do it. And if we deploy some .dacpac to SQL server production db with the option upgrade DB with this dacpac once everything completes successfully it will say success else it rollsback to the prior version. Even if it gets deployed successfully and later @ a point of time you wish to revert it back to the prior version, you can go ahead and delete the existing dacpac version so that it reverts to the older version of the db changes. And for the good questions that were asked in the session T-Shirts were given. SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M This one too was the best session. The speaker Vinod explained everything very much clearly. This was really useful session and you dont believe, as per my knowledge, in the total 3 days in the TechEd except the Keynote, for this session seats were full (House FULL)  People were even standing out to attend this session. Such a great one it was. The speaker did a deep dive in to the Query Plan section and showed which actually causes the problem. Its all about the thing that we need to understand about the execution of SQL server Queries. We think in a way and SQL Server never executes in that way. We need to understand that first. He also told about there might be two plans generated for a single query at a point of time because of parallel processors in the system. The Key is here in every query. There is something called Estimated Row Count and Actual Row Count in the query plan. If the estimated row count by SQL server tallies with the actual row count your performance will be awesome. He said some tweaks to achieve the same. After this as usual we had lunch SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan This was more of a DBA's session. Am really sorry I was totally blank and I was not interested to attend this session and walked out to attend Migrating to the cloud by Harish Ranganathan (My favorite Speaker) but unfortunately that was some other persons session. There the speaker was telling about how to configure the connection strings in such a way that we can connect to the SQL Azure platform from our VS and also showed us how to deploy the same in to Windows Azure. In between there were lot of technical problems like laptop hang, user locked and he was switching between systems, also i came in the half so i wasnt able to listen that fully. In between, Since I got an MCTS certification they gave me T-Shirt with the lines 'Iam Certified. Are you?' and they asked me to wear that. If we wear that we might get spotted and they would give us some goodies  So on the 3rd day I was wearing that T-Shirt. I got spotted by the person Tarun who was coordinating things about the certification, and he was accompanied with a cameraman and they interviewed me about the certification and I was shown live in the Teched and was seen by 60000 live viewers of the TechEd. I was really happy on that. Data Recovery / Consistency with CheckDB - by Vinod Kumar M This was one of the best sessions too in the TechEd. This guy is really amazing. In front of us he crashed a DB and showed how to recover the same in 6 different ways for different no of failures. Showed about Different types of error msgs like : 823,824,825 msdb..suspect_pages DBCC CheckDB (different parameters to it) I am really waiting for his session to get uploaded live in the Teched Website. Here is his contact info If you wish to connect to him : Twitter : @vinodk_sql Website : www.ExtremeExperts.com Blog : http://blogs.sqlxml.org/vinodkumar Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Pinal Dave is a King in SQL and he is a SQL MVP and he is the owner of SQLAuthority.com He took the session on Spatial Databases from the start. Showed about the different types of Spatial : Geometric and Geographic Geometric : x and y axis its a planar surface Geographic : Spherical surface with 3600  as the maximum which is used to represent the geographic points on the earth and easy to draw maps of different kinds. He had a lot of obstacles during his session like rain coming inside the hall, mic wires got bursted due to rain, Videos off on the display screens. In spite of that he asked the audience to come in the front rows and managed to take a good session without ppts and finally we got the displays on and he was showing demos on the same what he explained orally. That was really a fun filled informative session. He gave some books for the persons who asked good questions and answered well for his questions and I got one too  (It was a book on Data Mining - Wrox Publishers) And finally after all these things there was Keynote session for close of the TechEd. and we all assembled in a big hall where Mr.Ashok Soota, a man of age around 70  co-founder of Mindtree was called to give some lecture on his successes. He was explaining about his past and what all companies he switched and for what reasons and what are all his successes and what are all his failures and the learnings of him from his past failures. and his success and failures on his partnerships with the other concern. And there were some questions for him like What is your suggestion on young entrepreneur? How did you learn from past failures? What is reiterating your success? What is your suggestion on partnerships? How to choose partnerships? etc. And they said @ 7.30 Pm there would be a party night, but unfortunately i was not able to attend that because I had to catch my train and before that i had to pack things, so I started @ 7 itself. Thats it about the TechED!!! Stay tuned for further Technology updates.

  Read the article

• How to deal with a poor team leader and a tester manager from hell? [closed]

  - by Google

  Let me begin by explaining my situation and give a little context to the situation. My company has around 15 developers but we're split up on two different areas. We have a fresh product team and the old product team. The old product team does mostly bug fixes/maintenance and a feature here and there. The fresh product had never been released and was new from the ground up. I am on the fresh product team. The team consists of three developers (myself, another developer and a senior developer). The senior is also our team leader. Our roles are as follows: Myself: building the administration client as well as build/release stuff Other dev: building the primary client Team lead: building the server In addition to the dev team, we interact with the test manager often. By "we" I mean me since I do the build stuff and give him the builds to test. Trial 1: The other developer on my team and I have both tried to talk to our manager about our team leader. About two weeks before release we went in his office and had a closed door meeting before our team lead got to work. We expressed our concerns about the product, its release date and our team leader. We expressed our team leader had a "rosey" image of the product's state. Our manager seemed to listen to what we said and thanked us for taking the initiative to speak with him about it. He got us an extra two weeks before release. The situation with the leader didn't change. In fact, it got a little worse. While we were using the two weeks to fix issues he was slacking off quite a bit. Just to name a few things, he installed Windows 8 on his dev machine during this time (claimed him machine was broke), he wrote a plugin for our office messenger that turned turned messages into speech, and one time when I went in his office he was making a 3D model in Blender (for "fun"). He felt the product was "pretty good" and ready for release. During this time I dealt with the test manager on a daily basis. Every bug or issue that popped up he would pretty much attack me personally (regardless of which component the bug was in). The test manager would often push his "views" of what needed to be done with the product. He virtually ordered me to change text on our installer and to add features to the installer and administration client. I tried to express how his suggestions were "valid ideas" but it was too close to release to do those kinds of things and to make matters worse, our technical writer had already finished documentation and such a change would not only affect the dev team but would affect the technical writer and marketing as well. I expressed I wasn't going to make those changes without marketing's consent as well as the technical writer and my manager's. He pretty much said I don't care about the product and said I don't do my job. I would like to take a moment to say I take my job seriously and I do my best. I am the kind of person that goes to work 30-40 mins early and usually leaves 30 minutes later than everyone else. Saying I don't care or do my job is just insulting. His "attacks" on me grew from day to day. Every bug that popped up he would usually comment on in some manner that jabbed me and the other developer. "Oh that bug! Yeah that should have been fixed by now, figures! If someone would do their job!" and other similar kinds of comments. Keep in mind 8 out of 10 bugs were in the server and had nothing to do with me and the other developer. That didn't seem to matter.. On one occasion they got pretty bad and we almost got into a yelling match so I decided to stop talking to him all together. I carried all communication through office email (with my manager cc'd). He never attacked me via email. He still attempted to get aggressive with me in person but I completely ignore him and my only response to any question is, "Ask my team leader." or "Ask a product manager." The product launched after our two week extension. Trial 2: The day after the product launch our team leader went on vacation (thanks....). At this time we got a lot of questions from the tech support... major issues with the product. All of these issues were bugs marked "resolved" by our lovely team leader (a typical situation that often popped up). This is where we currently are. The other developer has been with the company for about three years (I've been there only five months) and told me he was going to speak with our manager alone and hoped it would help get our concerns across a little better in a one-on-one. He spoke with the manager and directly addressed all of our concerns regarding our team leader and the test manager giving us (mostly me) hell. Our manager basically said he understood how hard we work and said he noticed it and there's no doubt about it. He said he spoke with the test manager about his temper. Regarding the team leader, he didn't say a whole lot. He suggested we sit down with the team leader and address our concerns (isn't that the manager's job?). We're still waiting to see if anything has changed but we doubt it. What can we do next? 1) Talk to the team leader (may stress relationship and make work awkward) I admit the team leader is generally a nice guy. He is just a horrible leader and working closely with him is painful. I still don't believe bringing this directly to the team leader would help at all and may negatively impact the situation. 2) I could quit. Other than this situation the job is pretty fantastic. I really like my other coworkers and we have quite a bit of freedom. 3) I could take the situation with the team leader to one of the owners. I would then be throwing my manager under the bus. 4) I could take the situation with the test manager to HR. Any suggestions? Comments?

  Read the article

• Prioritizing Product Features

  - by Robert May

  A very common task in Agile Environments is prioritization.  Teams that are functioning well will prioritize new features, old features, the backlog, and any other source of stories for the team, and they’ll do it regularly. Not all teams are good at prioritizing according to the real return on investment that building stories will yield to the company.  This is unfortunate.  Too often, teams end up building features that are less valuable, and everyone seems to know it except perhaps the product owner!  Most features built into software are never even used.  Clearly, not much return for features that go unused. So how does a company avoid building features that add little value to the company?  This is a tough question to answer, but usually, this prioritization starts at the top with the executives of the company.  After all, they’re responsible for the overall vision of the company. Here’s what I recommend: Know your market. Know your customers and users. Know where you’re going and what you want to achieve. Implement the Vision Know Your Market We often see companies that don’t know their market.  Personally, I’m surprised by this.  These companies don’t know who their competitors are, don’t know what features make their product desirable in the market, and in many cases, get by with saying, “I’ve been doing this for XX years.  I know what the market wants!”  In many cases, they equate “marketing” with “advertising” and don’t understand the difference. This is almost never true.  Good companies will spend significant amounts of time and money finding out who they’re competing against and what makes their competitors successful in the marketplace.  Good companies understand that marketing involves more than just advertising.  Often, marketing is mostly research and analysis, not sales.  Until you understand your market, you cannot know what features will give you the best return on your investment dollar. Good companies have a marketing department and can answer the next important step which is to know your customers and your users. Know your Customers and Users First, note that I included both customers and users.  They’re often not the same thing.  Users use the product that you build.  Customers buy the product that you build.  It’s a subtle difference, but too often, I’ve seen companies that focus exclusively on one or the other and are not successful simply because they ignore an important part of the group. If your company is doing appropriate marketing, you know that these are two different aspects of your product and that both deserve attention to have a product that is successful in your target market.  Your marketing department should be spending a lot of time understanding these personas and then conveying that information to the company. I’m always surprised when development teams think that they can build a product that people want to use without understanding the users of that product.  Developers think differently than most people in the world.  They know what the computer is doing.  The computer isn’t magic to them.  So when they assume that they know how to build something, they bring with them quite a bit of baggage.  Never assume that you know your customer unless you’re regularly having interaction with them.  Also, don’t just leave this to Marketing or Product Management.  Take them time to get your developers out with the customers as well.  Developers are very smart people, and often, seeing how someone uses their software inspires them to make a much better product. Very often, because the users and customers aren’t know, teams will spend a significant amount of time building apps that are super flexible and configurable so that any possible combination of feature can be used.  This demonstrates a clear lack of understanding of the customer.  Most configuration questions can quickly be answered by talking to the customer.  In most cases, if your software requires significant setup and configuration before its usable, you probably don’t know your customers and users very well. Until you know your customers, you cannot know what features will be most valuable to your customers and you cannot build those features in a way that your customers can use. Know Where You’re Going and What You Want to Achieve Many companies suffer from not having a plan.  Executives will tell the team to make them a plan.  The team, not knowing their market and customers and users, will come up with a plan that doesn’t reflect reality and doesn’t consider ROI.  Management then wonders why the product is doing poorly in the market place. Instead of leaving this up to the teams, as executives, work with Marketing to understand what broad categories of features will sell the most product in the marketplace.  Then, once you’ve determined that, give this vision to the team and let them run with it.  Revise the vision as needed, but avoid changing streams frequently.  Sure, sometimes you need to, but often, executives will change priorities many times a month, leading to nothing more than confusion.  If the team has a vision, they’ll be able to execute that vision far better than they could otherwise. By knowing what products are most important, you can set budgetary goals and guidelines that will help you achieve the vision that was created. Implement the Vision Creating the vision is often where the general executives stop participating in the plan.  The team is responsible for implementing that vision.  Executives should attend showcases and and should remain aware of the progress that the team is making towards meeting the vision, however. Once a broad vision has been created, the team should break that vision down into minimal market features (MMF).  These MMFs should be sized using story points so that, using the team’s velocity, an estimated cost can be determined for each feature.  The product management team should then try to quantify the relative value of the MMFs based on customer feedback and interviews.  Once the value and cost of creating the feature is understood, a return on investment can be calculated.  The features should then be prioritized with the MMF’s that have the highest value and lowest cost rising to the top of features to implement.  Don’t let politics get in the way! Once the MMF’s have been prioritized, they should go through release planning to schedule them for implementation. Conclusion By having a good grasp on the strategy of the company, your Agile teams can be much more effective.  Each and every story the team is implementing will roll up into features that matter to the company and provide ROI to them.  The steps outlined in this post should be repeated on a regular basis.  I recommend reviewing them at least once per quarter to make sure that the vision hasn’t shifted and that the teams are still working on what matters most to the company. Technorati Tags: Agile,Product Owner,ROI

  Read the article

• Database continuous integration step by step

  - by David Atkinson

  This post will describe how to set up basic database continuous integration using TeamCity to initiate the build process, SQL Source Control to put your database under source control, and the SQL Compare command line to keep a test database up to date. In my example I will be using Subversion as my source control repository. If you wish to follow my steps verbatim, please make sure you have TortoiseSVN, SQL Compare and SQL Source Control installed. Downloading and Installing TeamCity TeamCity (http://www.jetbrains.com/teamcity/index.html) is free for up to three agents, so it a great no-risk tool you can use to experiment with. 1. Download the latest version from the JetBrains website. For some reason the TeamCity executable didn't download properly for me, stalling frustratingly at 99%, so I tried again with the zip file download option (see screenshot below), which worked flawlessly. 2. Run the installer using the defaults. This results in a set-up with the server component and agent installed on the same machine, which is ideal for getting started with ease. 3. Check that the build agent is pointing to the server correctly. This has caught me out a few times before. This setting is in C:\TeamCity\buildAgent\conf\buildAgent.properties and for my installation is serverUrl=http\://localhost\:80 . If you need to change this value, if for example you've had to install the Server console to a different port number, the TeamCity Build Agent Service will need to be restarted for the change to take effect. 4. Open the TeamCity admin console on http://localhost , and specify your own designated username and password at first startup. Putting your database in source control using SQL Source Control 5. Assuming you've got SQL Source Control installed, select a development database in the SQL Server Management Studio Object Explorer and select Link Database to Source Control. 6. For the Link step you can either create your own empty folder in source control, or you can select Just Evaluating, which just creates a local subversion repository for you behind the scenes. 7. Once linked, note that your database turns green in the Object Explorer. Visit the Commit tab to do an initial commit of your database objects by typing in an appropriate comment and clicking Commit. 8. There is a hidden feature in SQL Source Control that opens up TortoiseSVN (provided it is installed) pointing to the linked repository. Keep Shift depressed and right click on the text to the right of 'Linked to', in the example below, it's the red Evaluation Repository text. Select Open TortoiseSVN Repo Browser. This screen should give you an idea of how SQL Source Control manages the object files behind the scenes. Back in the TeamCity admin console, we'll now create a new project to monitor the above repository location and to trigger a 'build' each time the repository changes. 9. In TeamCity Adminstration, select Create Project and give it a name, such as "My first database CI", and click Create. 10. Click on Create Build Configuration, and name it something like "Integration build". 11. Click VCS settings and then Create And Attach new VCS root. This is where you will tell TeamCity about the repository it should monitor. 12. In my case since I'm using the Just Evaluating option in SQL Source Control, I should select Subversion. 13. In the URL field paste your repository location. In my case this is file:///C:/Users/David.Atkinson/AppData/Local/Red Gate/SQL Source Control 3/EvaluationRepositories/WidgetDevelopment/WidgetDevelopment 14. Click on Test Connection to ensure that you can communicate with your source control system. Click Save. 15. Click Add Build Step, and Runner Type: Command Line. Should you be familiar with the other runner types, such as NAnt, MSBuild or Powershell, you can opt for these, but for the same of keeping it simple I will pick the simplest option. 16. If you have installed SQL Compare in the default location, set the Command Executable field to: C:\Program Files (x86)\Red Gate\SQL Compare 10\sqlcompare.exe 17. Flip back to SSMS briefly and add a new database to your server. This will be the database used for continuous integration testing. 18. Set the command parameters according to your server and the name of the database you have created. In my case I created database RedGateCI on server .\sql2008r2 /scripts1:. /server2:.\sql2008r2 /db2:RedGateCI /sync /verbose Note that if you pick a server instance that isn't on your local machine, you'll need the TCP/IP protocol enabled in SQL Server Configuration Manager otherwise the SQL Compare command line will not be able to connect. 19. Save and select Build Triggering / Add New Trigger / VCS Trigger. This is where you tell TeamCity when it should initiate a build. Click Save. 20. Now return to SQL Server Management Studio and make a schema change (eg add a new object) to your linked development database. A blue indicator will appear in the Object Explorer. Commit this change, typing in an appropriate check-in comment. All being good, within 60 seconds (a TeamCity default that can be changed) a build will be triggered. 21. Click on Projects in TeamCity to get back to the overview screen: The build log will show you the console output, which is useful for troubleshooting any issues: That's it! You now have continuous integration on your database. In future posts I'll cover how you can generate and test the database creation script, the database upgrade script, and run database unit tests as part of your continuous integration script. If you have any trouble getting this up and running please let me know, either by commenting on this post, or email me directly using the email address below. Technorati Tags: SQL Server

  Read the article

• Replication Services as ETL extraction tool

  - by jorg

  In my last blog post I explained the principles of Replication Services and the possibilities it offers in a BI environment. One of the possibilities I described was the use of snapshot replication as an ETL extraction tool: “Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!” Well I have tried it out and I must say it worked well. I was able to let replication services do work in a fraction of the time it would cost me to do the same in SSIS. What I did was the following: Configure snapshot replication for some Adventure Works tables, this was quite simple and straightforward. Create an SSIS package that executes the snapshot replication on demand and waits for its completion. This is something that you can’t do with out of the box functionality. While configuring the snapshot replication two SQL Agent Jobs are created, one for the creation of the snapshot and one for the distribution of the snapshot. Unfortunately these jobs are  asynchronous which means that if you execute them they immediately report back if the job started successfully or not, they do not wait for completion and report its result afterwards. So I had to create an SSIS package that executes the jobs and waits for their completion before the rest of the ETL process continues. Fortunately I was able to create the SSIS package with the desired functionality. I have made a step-by-step guide that will help you configure the snapshot replication and I have uploaded the SSIS package you need to execute it. Configure snapshot replication   The first step is to create a publication on the database you want to replicate. Connect to SQL Server Management Studio and right-click Replication, choose for New.. Publication…   The New Publication Wizard appears, click Next Choose your “source” database and click Next Choose Snapshot publication and click Next   You can now select tables and other objects that you want to publish Expand Tables and select the tables that are needed in your ETL process In the next screen you can add filters on the selected tables which can be very useful. Think about selecting only the last x days of data for example. Its possible to filter out rows and/or columns. In this example I did not apply any filters. Schedule the Snapshot Agent to run at a desired time, by doing this a SQL Agent Job is created which we need to execute from a SSIS package later on. Next you need to set the Security Settings for the Snapshot Agent. Click on the Security Settings button.   In this example I ran the Agent under the SQL Server Agent service account. This is not recommended as a security best practice. Fortunately there is an excellent article on TechNet which tells you exactly how to set up the security for replication services. Read it here and make sure you follow the guidelines!   On the next screen choose to create the publication at the end of the wizard Give the publication a name (SnapshotTest) and complete the wizard   The publication is created and the articles (tables in this case) are added Now the publication is created successfully its time to create a new subscription for this publication.   Expand the Replication folder in SSMS and right click Local Subscriptions, choose New Subscriptions   The New Subscription Wizard appears   Select the publisher on which you just created your publication and select the database and publication (SnapshotTest)   You can now choose where the Distribution Agent should run. If it runs at the distributor (push subscriptions) it causes extra processing overhead. If you use a separate server for your ETL process and databases choose to run each agent at its subscriber (pull subscriptions) to reduce the processing overhead at the distributor. Of course we need a database for the subscription and fortunately the Wizard can create it for you. Choose for New database   Give the database the desired name, set the desired options and click OK You can now add multiple SQL Server Subscribers which is not necessary in this case but can be very useful.   You now need to set the security settings for the Distribution Agent. Click on the …. button Again, in this example I ran the Agent under the SQL Server Agent service account. Read the security best practices here   Click Next   Make sure you create a synchronization job schedule again. This job is also necessary in the SSIS package later on. Initialize the subscription at first synchronization Select the first box to create the subscription when finishing this wizard Complete the wizard by clicking Finish The subscription will be created In SSMS you see a new database is created, the subscriber. There are no tables or other objects in the database available yet because the replication jobs did not ran yet. Now expand the SQL Server Agent, go to Jobs and search for the job that creates the snapshot:   Rename this job to “CreateSnapshot” Now search for the job that distributes the snapshot:   Rename this job to “DistributeSnapshot” Create an SSIS package that executes the snapshot replication We now need an SSIS package that will take care of the execution of both jobs. The CreateSnapshot job needs to execute and finish before the DistributeSnapshot job runs. After the DistributeSnapshot job has started the package needs to wait until its finished before the package execution finishes. The Execute SQL Server Agent Job Task is designed to execute SQL Agent Jobs from SSIS. Unfortunately this SSIS task only executes the job and reports back if the job started succesfully or not, it does not report if the job actually completed with success or failure. This is because these jobs are asynchronous. The SSIS package I’ve created does the following: It runs the CreateSnapshot job It checks every 5 seconds if the job is completed with a for loop When the CreateSnapshot job is completed it starts the DistributeSnapshot job And again it waits until the snapshot is delivered before the package will finish successfully Quite simple and the package is ready to use as standalone extract mechanism. After executing the package the replicated tables are added to the subscriber database and are filled with data:   Download the SSIS package here (SSIS 2008) Conclusion In this example I only replicated 5 tables, I could create a SSIS package that does the same in approximately the same amount of time. But if I replicated all the 70+ AdventureWorks tables I would save a lot of time and boring work! With replication services you also benefit from the feature that schema changes are applied automatically which means your entire extract phase wont break. Because a snapshot is created using the bcp utility (bulk copy) it’s also quite fast, so the performance will be quite good. Disadvantages of using snapshot replication as extraction tool is the limitation on source systems. You can only choose SQL Server or Oracle databases to act as a publisher. So if you plan to build an extract phase for your ETL process that will invoke a lot of tables think about replication services, it would save you a lot of time and thanks to the Extract SSIS package I’ve created you can perfectly fit it in your usual SSIS ETL process.

  Read the article

• How To Remove People and Objects From Photographs In Photoshop

  - by Eric Z Goodnight

  You might think that it’s a complicated process to remove objects from photographs. But really Photoshop makes it quite simple, even when removing all traces of a person from digital photographs. Read on to see just how easy it is. Photoshop was originally created to be an image editing program, and it excels at it. With hardly any Photoshop experience, any beginner can begin removing objects or people from their photos. Have some friends that photobombed an otherwise great pic? Tell them to say their farewells, because here’s how to get rid of them with Photoshop! Tools for Removing Objects Removing an object is not really “magical” work. Your goal is basically to cover up the information you don’t want in an image with information you do want. In this sample image, we want to remove the cigar smoking man, and leave the geisha. Here’s a couple of the tools that can be useful to work with when attempting this kind of task. Clone Stamp and Pattern Stamp Tool: Samples parts of your image from your background, and allows you to paint into your image with your mouse or stylus. Eraser and Brush Tools: Paint flat colors and shapes, and erase cloned layers of image information. Basic, down and dirty photo editing tools. Pen, Quick Selection, Lasso, and Crop tools: Select, isolate, and remove parts of your image with these selection tools. All useful in their own way. Some, like the pen tool, are nightmarishly tough on beginners. Remove a Person with the Clone Stamp Tool (Video) The video above uses the Clone Stamp tool to sample and paint with the background texture. It’s a simple tool to use, although it can be confusing, possibly counter-intuitive. Here’s some pointers, in addition to the video above. Select shortcut key to choose the Clone tool stamp from the Tools Panel. Always create a copy of your background layer before doing heavy edits by right clicking on the background in your Layers Panel and selecting “Duplicate.” Hold with the Clone Tool selected, and click anywhere in your image to sample that area. When you’re sampling an area, your cursor is “Aligned” with your sample area. When you paint, your sample area moves. You can turn the “Aligned” setting off by clicking the in the Options Panel at the top of your screen if you want. Change your brush size and hardness as shown in the video by right-clicking in your image. Use your lasso to copy and paste pieces of your image in order to cover up any parts that seem appropriate. Photoshop Magic with the “Content-Aware Fill” One of the hallmark features of CS5 is the “Content-Aware Fill.” Content aware fill can be an excellent shortcut to removing objects and even people in Photoshop, but it is somewhat limited, and can get confused. Here’s a basic rundown on how it works. Select an object using your Lasso tool, shortcut key . The Lasso works fine as this selection can be rough. Navigate to Edit > Fill, and select “Content-Aware,” as illustrated above, from the pull-down menu. It’s surprisingly simple. After some processing, Photoshop has done the work of removing the object for you. It takes a few moments, and it is not perfect, so be prepared to touch it up with some Copy-Paste, or some Clone stamp action. Content Aware Fill Has Its Limits Keep in mind that the Content Aware Fill is meant to be used with other techniques in mind. It doesn’t always perform perfectly, but can give you a great starting point. Take this image for instance. It is actually plausible to hide this figure and make this image look like he was never there at all. With a selection made with the Lasso tool, navigate to Edit > Fill and select “Content Aware” again. The result is surprisingly good, but as you can see, worthy of some touch up. With a result like this one, you’ll have to get your hands dirty with copy-paste to create believable lines in the background. With many photographs, Content Aware Fill will simply get confused and give you results you won’t be happy with. Additional Touch Up for Bad Background Textures with the Pattern Stamp Tool For the perfectionist, cleaning up the lumpy looking textures that the Clone Stamp can leave is fairly simple using the Pattern Stamp Tool. Sample an piece of your image with your Marquee Tool, shortcut key . Navigate to Edit > Define Pattern to create a new Pattern from your selection. Click OK to continue. Click and hold down on the Clone Stamp tool in your Tools Panel until you can select the Pattern Stamp Tool. Pick your new pattern from the Options at the top of your screen, in the Options Panel. Then simply right click in your image in order to pick as soft a brush as possible to paint with. Paint into your image until your background is as smooth as you want it to be, making your painted out object more and more invisible. If you get lines from your repeated texture, experiment turning the on and off and paint over them. In addition to this, simple use of the Crop Tool, shortcut , can recompose an image, making it look as if it never had another object in it at all. Combine these techniques to find a method that works best for your images. Have questions or comments concerning Graphics, Photos, Filetypes, or Photoshop? Send your questions to [email protected], and they may be featured in a future How-To Geek Graphics article. Image Credits: Geisha Kyoto Gion by Todd Laracuenta via Wikipedia, used under Creative Commons. Moai Rano raraku by Aurbina, in Public Domain. Chris Young visits Wrigley by TonyTheTiger, via Wikipedia, used under Creative Commons. Latest Features How-To Geek ETC Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents

  Read the article

• C#/.NET Little Wonders: The Timeout static class

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. When I started the “Little Wonders” series, I really wanted to pay homage to parts of the .NET Framework that are often small but can help in big ways.  The item I have to discuss today really is a very small item in the .NET BCL, but once again I feel it can help make the intention of code much clearer and thus is worthy of note. The Problem - Magic numbers aren’t very readable or maintainable In my first Little Wonders Post (Five Little Wonders That Make Code Better) I mention the TimeSpan factory methods which, I feel, really help the readability of constructed TimeSpan instances. Just to quickly recap that discussion, ask yourself what the TimeSpan specified in each case below is 1: // Five minutes? Five Seconds? 2: var fiveWhat1 = new TimeSpan(0, 0, 5); 3: var fiveWhat2 = new TimeSpan(0, 0, 5, 0); 4: var fiveWhat3 = new TimeSpan(0, 0, 5, 0, 0); You’d think they’d all be the same unit of time, right?  After all, most overloads tend to tack additional arguments on the end.  But this is not the case with TimeSpan, where the constructor forms are:     TimeSpan(int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds, int milliseconds); Notice how in the 4 and 5 parameter version we suddenly have the parameter days slipping in front of hours?  This can make reading constructors like those above much harder.  Fortunately, there are TimeSpan factory methods to help make your intention crystal clear: 1: // Ah! Much clearer! 2: var fiveSeconds = TimeSpan.FromSeconds(5); These are great because they remove all ambiguity from the reader!  So in short, magic numbers in constructors and methods can be ambiguous, and anything we can do to clean up the intention of the developer will make the code much easier to read and maintain. Timeout – Readable identifiers for infinite timeout values In a similar way to TimeSpan, let’s consider specifying timeouts for some of .NET’s (or our own) many methods that allow you to specify timeout periods. For example, in the TPL Task class, there is a family of Wait() methods that can take TimeSpan or int for timeouts.  Typically, if you want to specify an infinite timeout, you’d just call the version that doesn’t take a timeout parameter at all: 1: myTask.Wait(); // infinite wait But there are versions that take the int or TimeSpan for timeout as well: 1: // Wait for 100 ms 2: myTask.Wait(100); 3:  4: // Wait for 5 seconds 5: myTask.Wait(TimeSpan.FromSeconds(5); Now, if we want to specify an infinite timeout to wait on the Task, we could pass –1 (or a TimeSpan set to –1 ms), which what the .NET BCL methods with timeouts use to represent an infinite timeout: 1: // Also infinite timeouts, but harder to read/maintain 2: myTask.Wait(-1); 3: myTask.Wait(TimeSpan.FromMilliseconds(-1)); However, these are not as readable or maintainable.  If you were writing this code, you might make the mistake of thinking 0 or int.MaxValue was an infinite timeout, and you’d be incorrect.  Also, reading the code above it isn’t as clear that –1 is infinite unless you happen to know that is the specified behavior. To make the code like this easier to read and maintain, there is a static class called Timeout in the System.Threading namespace which contains definition for infinite timeouts specified as both int and TimeSpan forms: Timeout.Infinite An integer constant with a value of –1 Timeout.InfiniteTimeSpan A static readonly TimeSpan which represents –1 ms (only available in .NET 4.5+) This makes our calls to Task.Wait() (or any other calls with timeouts) much more clear: 1: // intention to wait indefinitely is quite clear now 2: myTask.Wait(Timeout.Infinite); 3: myTask.Wait(Timeout.InfiniteTimeSpan); But wait, you may say, why would we care at all?  Why not use the version of Wait() that takes no arguments?  Good question!  When you’re directly calling the method with an infinite timeout that’s what you’d most likely do, but what if you are just passing along a timeout specified by a caller from higher up?  Or perhaps storing a timeout value from a configuration file, and want to default it to infinite? For example, perhaps you are designing a communications module and want to be able to shutdown gracefully, but if you can’t gracefully finish in a specified amount of time you want to force the connection closed.  You could create a Shutdown() method in your class, and take a TimeSpan or an int for the amount of time to wait for a clean shutdown – perhaps waiting for client to acknowledge – before terminating the connection.  So, assume we had a pub/sub system with a class to broadcast messages: 1: // Some class to broadcast messages to connected clients 2: public class Broadcaster 3: { 4: // ... 5:  6: // Shutdown connection to clients, wait for ack back from clients 7: // until all acks received or timeout, whichever happens first 8: public void Shutdown(int timeout) 9: { 10: // Kick off a task here to send shutdown request to clients and wait 11: // for the task to finish below for the specified time... 12:  13: if (!shutdownTask.Wait(timeout)) 14: { 15: // If Wait() returns false, we timed out and task 16: // did not join in time. 17: } 18: } 19: } We could even add an overload to allow us to use TimeSpan instead of int, to give our callers the flexibility to specify timeouts either way: 1: // overload to allow them to specify Timeout in TimeSpan, would 2: // just call the int version passing in the TotalMilliseconds... 3: public void Shutdown(TimeSpan timeout) 4: { 5: Shutdown(timeout.TotalMilliseconds); 6: } Notice in case of this class, we don’t assume the caller wants infinite timeouts, we choose to rely on them to tell us how long to wait.  So now, if they choose an infinite timeout, they could use the –1, which is more cryptic, or use Timeout class to make the intention clear: 1: // shutdown the broadcaster, waiting until all clients ack back 2: // without timing out. 3: myBroadcaster.Shutdown(Timeout.Infinite); We could even add a default argument using the int parameter version so that specifying no arguments to Shutdown() assumes an infinite timeout: 1: // Modified original Shutdown() method to add a default of 2: // Timeout.Infinite, works because Timeout.Infinite is a compile 3: // time constant. 4: public void Shutdown(int timeout = Timeout.Infinite) 5: { 6: // same code as before 7: } Note that you can’t default the ShutDown(TimeSpan) overload with Timeout.InfiniteTimeSpan since it is not a compile-time constant.  The only acceptable default for a TimeSpan parameter would be default(TimeSpan) which is zero milliseconds, which specified no wait, not infinite wait. Summary While Timeout.Infinite and Timeout.InfiniteTimeSpan are not earth-shattering classes in terms of functionality, they do give you very handy and readable constant values that you can use in your programs to help increase readability and maintainability when specifying infinite timeouts for various timeouts in the BCL and your own applications. Technorati Tags: C#,CSharp,.NET,Little Wonders,Timeout,Task

  Read the article

• Rockmelt, the technology adoption model, and Facebook's spare internet

  - by Roger Hart

  Regardless of how good it is, you'd have to have a heart of stone not to make snide remarks about Rockmelt. After all, on the surface it looks a lot like some people spent two years building a browser instead of just bashing out a Chrome extension over a wet weekend. It probably does some more stuff. I don't know for sure because artificial scarcity is cool, apparently, so the "invitation" is still in the post*. I may in fact never know for sure, because I'm not wild about Facebook sign-in as a prerequisite for anything. From the video, and some initial reviews, my early reaction was: I have a browser, I have a Twitter client; what on earth is this for? The answer, of course, is "not me". Rockmelt is, in a way, quite audacious. Oh, sure, on launch day it's Bay Area bar-chat for the kids with no lenses in their retro specs and trousers that give you deep-vein thrombosis, but it's not really about them. Likewise,  Facebook just launched Google Wave, or something. And all the tech snobbery and scorn packed into describing it that way is irrelevant next to what they're doing with their platform. Here's something I drew in MS Paint** because I don't want to get sued: (see: The technology adoption lifecycle) A while ago in the Guardian, John Lanchester dusted off the idiom that "technology is stuff that doesn't work yet". The rest of the article would be quite interesting if it wasn't largely about MySpace, and he's sort of got a point. If you bolt on the sentiment that risk-averse businessmen like things that work, you've got the essence of Crossing the Chasm. Products for the mainstream market don't look much like technology. Think for  a second about early (1980s ish) hi-fi systems, with all the knobs and fiddly bits, their ostentatious technophile aesthetic. Then consider their sleeker and less (or at least less conspicuously) functional successors in the 1990s. The theory goes that innovators and early adopters like technology, it's a hobby in itself. The rest of the humans seem to like magic boxes with very few buttons that make stuff happen and never trouble them about why. Personally, I consider Apple's maddening insistence that iTunes is an acceptable way to move files around to be more or less morally unacceptable. Most people couldn't care less. Hence Rockmelt, and hence Facebook's continued growth. Rockmelt looks pointless to me, because I aggregate my social gubbins with Digsby, or use TweetDeck. But my use case is different and so are my enthusiasms. If I want to share photos, I'll use Flickr - but Facebook has photo sharing. If I want a short broadcast message, I'll use Twitter - Facebook has status updates. If I want to sell something with relatively little hassle, there's eBay - or Facebook marketplace. YouTube - check, FB Video. Email - messaging. Calendaring apps, yeah there are loads, or FB Events. What if I want to host a simple web page? Sure, they've got pages. Also Notes for blogging, and more games than I can count. This stuff is right there, where millions and millions of users are already, and for what they need it just works. It's not about me, because I'm not in the big juicy area under the curve. It's what 1990s portal sites could never have dreamed of achieving. Facebook is AOL on speed, crack, and some designer drugs it had specially imported from the future. It's a n00b-friendly gateway to the internet that just happens to serve up all the things you want to do online, right where you are. Oh, and everybody else is there too. The price of having all this and the social graph too is that you have all of this, and the social graph too. But plenty of folks have more incisive things to say than me about the whole privacy shebang, and it's not really what I'm talking about. Facebook is maintaining a vast, and fairly fully-featured training-wheels internet. And it makes up a large proportion of the online experience for a lot of people***. It's the entire web (2.0?) experience for the early and late majority. And sure, no individual bit of it is quite as slick or as fully-realised as something like Flickr (which wows me a bit every time I use it. Those guys are good at the web), but it doesn't have to be. It has to be unobtrusively good enough for the regular humans. It has to not feel like technology. This is what Rockmelt sort of is. You're online, you want something nebulously social, and you don't want to faff about with, say, Twitter clients. Wow! There it is on a really distracting sidebar, right in your browser. No effort! Yeah - fish nor fowl, much? It might work, I guess. There may be a demographic who want their social web experience more simply than tech tinkering, and who aren't just getting it from Facebook (or, for that matter, mobile devices). But I'd be surprised. Rockmelt feels like an attempt to grab a slice of Facebook-style "Look! It's right here, where you already are!", but it's still asking the mature market to install a new browser. Presumably this is where that Facebook sign-in predicate comes in handy, though it'll take some potent awareness marketing to make it fly. Meanwhile, Facebook quietly has the entire rest of the internet as a product management resource, and can continue to give most of the people most of what they want. Something that has not gone un-noticed in its potential to look a little sinister. But heck, they might even make Google Wave popular.     *This was true last week when I drafted this post. I got an invite subsequently, hence the screenshot. **MS Paint is no fun any more. It's actually good in Windows 7. Farewell ironically-shonky diagrams. *** It's also behind a single sign-in, lending a veneer of confidence, and partially solving the problem of usernames being crummy unique identifiers. I'll be blogging about that at some point.

  Read the article

• C#: Does an IDisposable in a Halted Iterator Dispose?

  - by James Michael Hare

  If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

  Read the article

• ASP.NET MVC JavaScript Routing

  - by zowens

  Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about.   The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file.  Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request):   The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter.   About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources.   Now that wasn’t too bad, was it :)   The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

  Read the article

• Learning content for MCSDs: Web Applications and Windows Store Apps using HTML5

  Recently, I started again to learn for various Microsoft certifications. First candidate on my way to MSCD: Web Applications is the Exam 70-480: Programming in HTML5 with JavaScript and CSS3. Motivation to go for a Microsoft exam I guess, this is quite personal but let me briefly describe my intentions to go that exam. First, I'm doing web development since the 1990's. Working with HTML, CSS and Javascript is happening almost daily in my workspace. And honestly, I do not only do 'pure' web development but already integrated several HTML/CSS/Javascript frontend UIs into an existing desktop application (written in Visual FoxPro) inclusive two-way communication and data exchange. Hm, might be an interesting topic for another blog article here... Second, this exam has a very interesting aspect which is listed at the bottom of the exam's details: Credit Toward Certification When you pass Exam 70-480: Programming in HTML5 with JavaScript and CSS3, you complete the requirements for the following certification(s): Programming in HTML5 with JavaScript and CSS3 Specialist Exam 70-480: Programming in HTML5 with JavaScript and CSS3: counts as credit toward the following certification(s): MCSD: Web Applications MCSD: Windows Store Apps using HTML5 So, passing one single exam will earn you specialist certification straight-forward, and opens the path to higher levels of certifications. Preparations and learning path Well, due to a newsletter from Microsoft Learning (MSL) I caught interest in picking up the circumstances and learning materials for this particular exam. As of writing this article there is a promotional / voucher code available which enables you to register for this exam for free! Simply register yourself with or log into your existing account at Prometric, choose the exam for a testing facility near to you and enter the voucher code HTMLJMP (available through 31.03.2013 or while supplies last). Hurry up, there are restrictions... As stated above, I'm already very familiar with web development and the programming flavours involved into this. But of course, it is always good to freshen up your knowledge and reflect on yourself. Microsoft is putting a lot of effort to attract any kind of developers into the 'App Development'. Whether it is for the Windows 8 Store or the Windows Phone 8 Store, doesn't really matter. They simply need more apps. This demand for skilled developers also comes with a nice side-effect: Lots and lots of material to study. During the first couple of hours, I could easily gather high quality preparation material - again for free! Following is just a small list of starting points. If you have more resources, please drop me a message in the comment section, and I'll be glad to update this article accordingly. Developing HTML5 Apps Jump Start This is an accelerated jump start video course on development of HTML5 Apps for Windows 8. There are six modules that are split into two video sessions per module. Very informative and intense course material. This is packed stuff taken from an official preparation course for exam 70-480. Developing Windows Store Apps with HTML5 Jump Start Again, an accelerated preparation video course on Windows 8 Apps. There are six modules with two video sessions each which will catapult you to your exam. This is also related to preps for exam 70-481. Programming Windows 8 Apps with HTML, CSS, and JavaScript Kraig Brockschmidt delves into the ups and downs of Windows 8 App development over 800+ pages. Great eBook to read, study, and to practice the samples - best of all, it's for free. codeSHOW() This is a Windows 8 HTML/JS project with the express goal of demonstrating simple development concepts for the Windows 8 platform. Code, code and more code... absolutely great stuff to study and practice. Microsoft Virtual Academy I already wrote about the MVA in a previous article. Well, if you haven't registered yourself yet, now is the time. The list is not complete for sure, but this might keep you busy for at least one or even two weeks to go through the material. Please don't hesitate to add more resources in the comment section. Right now, I'm already through all videos once, and digging my way through chapter 4 of Kraig's book. Additional material - Pluralsight Apart from those free online resources, I also following some courses from the excellent library of Pluralsight. They already have their own section for Windows 8 development, but of course, you get companion material about HTML5, CSS and Javascript in other sections, too. Introduction to Building Windows 8 Applications Building Windows 8 Applications with JavaScript and HTML Selling Windows 8 Apps HTML5 Fundamentals Using HTML5 and CSS3 HTML5 Advanced Topics CSS3 etc... Interesting to see that Michael Palermo provides his course material on multiple platforms. Fantastic! You might also pay a visit to his personal blog. Hm, it just came to my mind that Aaron Skonnard of Pluralsight publishes so-called '24 hours Learning Paths' based on courses available in the course library. Would be interested to see a combination for Windows 8 App development using HTML5, CSS3 and Javascript in the future. Recommended workspace environment Well, you might have guessed it but this requires Windows 8, Visual Studio 2012 Express or another flavour, and a valid Developers License. Due to an MSDN subscription I working on VS 2012 Premium with some additional tools by Telerik. Honestly, the fastest way to get you up and running for Windows 8 App development is the source code archive of codeSHOW(). It does not only give you all source code in general but contains a couple of SDKs like Bing Maps, Microsoft Advertising, Live ID, and Telerik Windows 8 controls... for free! Hint: Get the Windows Phone 8 SDK as well. Don't worry, while you are studying the material for Windows 8 you will be able to leverage from this knowledge to development for the phone platform, too. It takes roughly one to two hours to get your workspace and learning environment, at least this was my time frame due to slow internet connection and an aged spare machine. ;-) Oh, before I forget to mention it, as soon as you're done, go quickly to the Windows Store and search for ClassBrowserPlus. You might not need it ad hoc for your development using HTML5, CSS and Javascript but I think that it is a great developer's utility that enables you to view the properties, methods and events (along with help text) for all Windows 8 classes. It's always good to look behind the scenes and to explore how it is made. Idea: Start/join a learning group The way you learn new things or intensify your knowledge in a certain technology is completely up to your personal preference. Back in my days at the university, we used to meet once or twice a week in a small quiet room to exchange our progress, questions and problems we ran into. In general, I recommend to any software craftsman to lift your butt and get out to exchange with other developers. Personally, I like this approach, as it gives you new points of view and an insight into others' own experience with certain techniques and how they managed to solve tricky issues. Just keep it relaxed and not too formal after all, and you might a have a good time away from your dull office desk. Give your machine a break, too.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service

  - by Elton Stoneman

  We're in the process of delivering an enabling project to expose on-premise WCF services securely to Internet consumers. The Azure Service Bus Relay is doing the clever stuff, we register our on-premise service with Azure, consumers call into our .servicebus.windows.net namespace, and their requests are relayed and serviced on-premise. In theory it's all wonderfully simple; by using the relay we get lots of protocol options, free HTTPS and load balancing, and by integrating to ACS we get plenty of security options. Part of our delivery is a suite of sample consumers for the service - .NET, jQuery, PHP - and this set of posts will cover setting up the service and the consumers. Part 1: Exposing the on-premise service In theory, this is ultra-straightforward. In practice, and on a dev laptop it is - but in a corporate network with firewalls and proxies, it isn't, so we'll walkthrough some of the pitfalls. Note that I'm using the "old" Azure portal which will soon be out of date, but the new shiny portal should have the same steps available and be easier to use. We start with a simple WCF service which takes a string as input, reverses the string and returns it. The Part 1 version of the code is on GitHub here: on GitHub here: IPASBR Part 1. Configuring Azure Service Bus Start by logging into the Azure portal and registering a Service Bus namespace which will be our endpoint in the cloud. Give it a globally unique name, set it up somewhere near you (if you’re in Europe, remember Europe (North) is Ireland, and Europe (West) is the Netherlands), and  enable ACS integration by ticking "Access Control" as a service: Authenticating and authorizing to ACS When we try to register our on-premise service as a listener for the Service Bus endpoint, we need to supply credentials, which means only trusted service providers can act as listeners. We can use the default "owner" credentials, but that has admin permissions so a dedicated service account is better (Neil Mackenzie has a good post On Not Using owner with the Azure AppFabric Service Bus with lots of permission details). Click on "Access Control Service" for the namespace, navigate to Service Identities and add a new one. Give the new account a sensible name and description: Let ACS generate a symmetric key for you (this will be the shared secret we use in the on-premise service to authenticate as a listener), but be sure to set the expiration date to something usable. The portal defaults to expiring new identities after 1 year - but when your year is up *your identity will expire without warning* and everything will stop working. In production, you'll need governance to manage identity expiration and a process to make sure you renew identities and roll new keys regularly. The new service identity needs to be authorized to listen on the service bus endpoint. This is done through claim mapping in ACS - we'll set up a rule that says if the nameidentifier in the input claims has the value serviceProvider, in the output we'll have an action claim with the value Listen. In the ACS portal you'll see that there is already a Relying Party Application set up for ServiceBus, which has a Default rule group. Edit the rule group and click Add to add this new rule: The values to use are: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: serviceProvider Output claim type: net.windows.servicebus.action Output claim value: Listen When your service namespace and identity are set up, open the Part 1 solution and put your own namespace, service identity name and secret key into the file AzureConnectionDetails.xml in Solution Items, e.g: <azure namespace="sixeyed-ipasbr">    <!-- ACS credentials for the listening service (Part1):-->   <service identityName="serviceProvider"            symmetricKey="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>  </azure> Build the solution, and the T4 template will generate the Web.config for the service project with your Azure details in the transportClientEndpointBehavior:           <behavior name="SharedSecret">             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> , and your service namespace in the Azure endpoint:         <!-- Azure Service Bus endpoints -->          <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                   binding="netTcpRelayBinding"                   contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> The sample project is hosted in IIS, but it won't register with Azure until the service is activated. Typically you'd install AppFabric 1.1 for Widnows Server and set the service to auto-start in IIS, but for dev just navigate to the local REST URL, which will activate the service and register it with Azure. Testing the service locally As well as an Azure endpoint, the service has a WebHttpBinding for local REST access:         <!-- local REST endpoint for internal use -->         <endpoint address="rest"                   binding="webHttpBinding"                   behaviorConfiguration="RESTBehavior"                   contract="Sixeyed.Ipasbr.Services.IFormatService" /> Build the service, then navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 - and you should see the reversed string response: If your network allows it, you'll get the expected response as before, but in the background your service will also be listening in the cloud. Good stuff! Who needs network security? Onto the next post for consuming the service with the netTcpRelayBinding.  Setting up network access to Azure But, if you get an error, it's because your network is secured and it's doing something to stop the relay working. The Service Bus relay bindings try to use direct TCP connections to Azure, so if ports 9350-9354 are available *outbound*, then the relay will run through them. If not, the binding steps down to standard HTTP, and issues a CONNECT across port 443 or 80 to set up a tunnel for the relay. If your network security guys are doing their job, the first option will be blocked by the firewall, and the second option will be blocked by the proxy, so you'll get this error: System.ServiceModel.CommunicationException: Unable to reach sixeyed-ipasbr.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443) - and that will probably be the start of lots of discussions. Network guys don't really like giving servers special permissions for the web proxy, and they really don't like opening ports, so they'll need to be convinced about this. The resolution in our case was to put up a dedicated box in a DMZ, tinker with the firewall and the proxy until we got a relay connection working, then run some traffic which the the network guys monitored to do a security assessment afterwards. Along the way we hit a few more issues, diagnosed mainly with Fiddler and Wireshark: System.Net.ProtocolViolationException: Chunked encoding upload is not supported on the HTTP/1.0 protocol - this means the TCP ports are not available, so Azure tries to relay messaging traffic across HTTP. The service can access the endpoint, but the proxy is downgrading traffic to HTTP 1.0, which does not support tunneling, so Azure can’t make its connection. We were using the Squid proxy, version 2.6. The Squid project is incrementally adding HTTP 1.1 support, but there's no definitive list of what's supported in what version (here are some hints). System.ServiceModel.Security.SecurityNegotiationException: The X.509 certificate CN=servicebus.windows.net chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. The evocation function was unable to check revocation because the revocation server was offline. - by this point we'd given up on the HTTP proxy and opened the TCP ports. We got this error when the relay binding does it's authentication hop to ACS. The messaging traffic is TCP, but the control traffic still goes over HTTP, and as part of the ACS authentication the process checks with a revocation server to see if Microsoft’s ACS cert is still valid, so the proxy still needs some clearance. The service account (the IIS app pool identity) needs access to: www.public-trust.com mscrl.microsoft.com We still got this error periodically with different accounts running the app pool. We fixed that by ensuring the machine-wide proxy settings are set up, so every account uses the correct proxy: netsh winhttp set proxy proxy-server="http://proxy.x.y.z" - and you might need to run this to clear out your credential cache: certutil -urlcache * delete If your network guys end up grudgingly opening ports, they can restrict connections to the IP address range for your chosen Azure datacentre, which might make them happier - see Windows Azure Datacenter IP Ranges. After all that you've hopefully got an on-premise service listening in the cloud, which you can consume from pretty much any technology.

  Read the article

• Integrate Google Wave With Your Windows Workflow

  - by Matthew Guay

  Have you given Google Wave a try, only to find it difficult to keep up with?  Here’s how you can integrate Google Wave with your desktop and workflow with some free and simple apps. Google Wave is an online web app, and unlike many Google services, it’s not easily integrated with standard desktop applications.  Instead, you’ll have to keep it open in a browser tab, and since it is one of the most intensive HTML5 webapps available today, you may notice slowdowns in many popular browsers.  Plus, it can be hard to stay on top of your Wave conversations and collaborations by just switching back and forth between the website and whatever else you’re working on.  Here we’ll look at some tools that can help you integrate Google Wave with your workflow, and make it feel more native in Windows. Use Google Wave Directly in Windows What’s one of the best ways to make a web app feel like a native application?  By making it into a native application, of course!  Waver is a free Air powered app that can make the mobile version of Google Wave feel at home on your Windows, Mac, or Linux desktop.  We found it to be a quick and easy way to keep on top of our waves and collaborate with our friends. To get started with Waver, open their homepage on the Adobe Air Marketplace (link below) and click Download From Publisher. Waver is powered by Adobe Air, so if you don’t have Adobe Air installed, you’ll need to first download and install it. After clicking the link above, Adobe Air will open a prompt asking what you wish to do with the file.  Click Open, and then install as normal. Once the installation is finished, enter your Google Account info in the window.   After a few moments, you’ll see your Wave account in miniature, running directly in Waver.  Click a Wave to view it, or click New wave to start a new Wave message.  Unfortunately, in our tests the search box didn’t seem to work, but everything else worked fine. Google Wave works great in Waver, though all of the Wave features are not available since it is running the mobile version of Wave. You can still view content from plugins, including YouTube videos, directly in Waver.   Get Wave Notifications From Your Windows Taskbar Most popular email and Twitter clients give you notifications from your system tray when new messages come in.  And with Google Wave Notifier, you can now get the same alerts when you receive a new Wave message. Head over to the Google Wave Notifier site (link below), and click the download link to get started.  Make sure to download the latest Binary zip, as this one will contain the Windows program rather than the source code. Unzip the folder, and then run GoogleWaveNotifier.exe. On first run, you can enter your Google Account information.  Notice that this is not a standard account login window; you’ll need to enter your email address in the Username field, and then your password below it. You can also change other settings from this dialog, including update frequency and whether or not to run at startup.  Click the value, and then select the setting you want from the dropdown menu. Now, you’ll have a new Wave icon in your system tray.  When it detects new Waves or unread updates, it will display a popup notification with details about the unread Waves.  Additionally, the icon will change to show the number of unread Waves.  Click the popup to open Wave in your browser.  Or, if you have Waver installed, simply open the Waver window to view your latest Waves. If you ever need to change settings again in the future, right-click the icon and select Settings, and then edit as above. Get Wave Notifications in Your Email  Most of us have Outlook or Gmail open all day, and seldom leave the house without a Smartphone with push email.  And thanks to a new Wave feature, you can still keep up with your Waves without having to change your workflow. To activate email notifications from Google Wave, login to your Wave account, click the arrow beside your Inbox, and select Notifications. Select how quickly you want to receive notifications, and choose which email address you wish to receive the notifications.  Click Save when you’re finished. Now you’ll receive an email with information about new and updated Waves in your account.  If there were only small changes, you may get enough info directly in the email; otherwise, you can click the link and open that Wave in your browser. Conclusion Google Wave has great potential as a collaboration and communications platform, but by default it can be hard to keep up with what’s going on in your Waves.  These apps for Windows help you integrate Wave with your workflow, and can keep you from constantly logging in and checking for new Waves.  And since Google Wave registration is now open for everyone, it’s a great time to give it a try and see how it works for yourself. Links Signup for Google Wave (Google Account required) Download Waver from the Adobe Air Marketplace Download Google Wave Notifier Similar Articles Productive Geek Tips We Have 20 Google Wave Invites. Want One?Tired of Waiting for Google Wave? Try ShareFlow NowIntegrate Google Docs with Outlook the Easy WayAwesome Desktop Wallpapers: The Windows 7 EditionWeek in Geek: The Stupid Geek Tricks to Hide Extra Windows Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #050

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Executing Remote Stored Procedure – Calling Stored Procedure on Linked Server In this example we see two different methods of how to call Stored Procedures remotely.  Connection Property of SQL Server Management Studio SSMS A very simple example of the how to build connection properties for SQL Server with the help of SSMS. Sample Example of RANKING Functions – ROW_NUMBER, RANK, DENSE_RANK, NTILE SQL Server has a total of 4 ranking functions. Ranking functions return a ranking value for each row in a partition. All the ranking functions are non-deterministic. T-SQL Script to Add Clustered Primary Key Jr. DBA asked me three times in a day, how to create Clustered Primary Key. I gave him following sample example. That was the last time he asked “How to create Clustered Primary Key to table?” 2008 2008 – TRIM() Function – User Defined Function SQL Server does not have functions which can trim leading or trailing spaces of any string at the same time. SQL does have LTRIM() and RTRIM() which can trim leading and trailing spaces respectively. SQL Server 2008 also does not have TRIM() function. User can easily use LTRIM() and RTRIM() together and simulate TRIM() functionality. http://www.youtube.com/watch?v=1-hhApy6MHM 2009 Earlier I have written two different articles on the subject Remove Bookmark Lookup. This article is as part 3 of original article. Please read the first two articles here before continuing reading this article. Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 2 Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 3 Interesting Observation – Query Hint – FORCE ORDER SQL Server never stops to amaze me. As regular readers of this blog already know that besides conducting corporate training, I work on large-scale projects on query optimizations and server tuning projects. In one of the recent projects, I have noticed that a Junior Database Developer used the query hint Force Order; when I asked for details, I found out that the basic concept was not properly understood by him. Queries Waiting for Memory Allocation to Execute In one of the recent projects, I was asked to create a report of queries that are waiting for memory allocation. The reason was that we were doubtful regarding whether the memory was sufficient for the application. The following query can be useful in similar cases. Queries that do not have to wait on a memory grant will not appear in the result set of following query. 2010 Quickest Way to Identify Blocking Query and Resolution – Dirty Solution As the title suggests, this is quite a dirty solution; it’s not as elegant as you expect. However, it works totally fine. Simple Explanation of Data Type Precedence While I was working on creating a question for SQL SERVER – SQL Quiz – The View, The Table and The Clustered Index Confusion, I had actually created yet another question along with this question. However, I felt that the one which is posted on the SQL Quiz is much better than this one because what makes that more challenging question is that it has a multiple answer. Encrypted Stored Procedure and Activity Monitor I recently had received questionable if any stored procedure is encrypted can we see its definition in Activity Monitor.Answer is - No. Let us do a quick test. Let us create following Stored Procedure and then launch the Activity Monitor and check the text. Indexed View always Use Index on Table A single table can have maximum 249 non clustered indexes and 1 clustered index. In SQL Server 2008, a single table can have maximum 999 non clustered indexes and 1 clustered index. It is widely believed that a table can have only 1 clustered index, and this belief is true. I have some questions for all of you. Let us assume that I am creating view from the table itself and then create a clustered index on it. In my view, I am selecting the complete table itself. 2011 Detecting Database Case Sensitive Property using fn_helpcollations() I received a question on how to determine the case sensitivity of the database. The quick answer to this is to identify the collation of the database and check the properties of the collation. I have previously written how one can identify database collation. Once you have figured out the collation of the database, you can put that in the WHERE condition of the following T-SQL and then check the case sensitivity from the description. Server Side Paging in SQL Server CE (Compact Edition) SQL Server Denali is coming up with new T-SQL of Paging. I have written about the same earlier.SQL SERVER – Server Side Paging in SQL Server Denali – A Better Alternative,  SQL SERVER – Server Side Paging in SQL Server Denali Performance Comparison, SQL SERVER – Server Side Paging in SQL Server Denali – Part2 What is very interesting is that SQL Server CE 4.0 have the same feature introduced. Here is the quick example of the same. To run the script in the example, you will have to do installWebmatrix 4.0 and download sample database. Once done you can run following script. Why I am Going to Attend PASS Summit Unite 2011 The four-day event will be marked by a lot of learning, sharing, and networking, which will help me increase both my knowledge and contacts. Every year, PASS Summit provides me a golden opportunity to build my network as well as to identify and meet potential customers or employees. 2012 Manage Help Settings – CTRL + ALT + F1 This is very interesting read as my daughter once accidently came across a screen in SQL Server Management Studio. It took me 2-3 minutes to figure out how she has created the same screen. Recover the Accidentally Renamed Table “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you an idea about what your table name can be if you are lucky. Identify Numbers of Non Clustered Index on Tables for Entire Database Here is the script which will give you numbers of non clustered indexes on any table in entire database. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #029 – Video Here is the complete complete script which I have used in the SQL in Sixty Seconds Video. Thanks Harsh for important Tip in the comment. http://www.youtube.com/watch?v=3kDHC_Tjrns Advanced Data Quality Services with Melissa Data – Azure Data Market For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Thoughts on the Nomination Committee Campaign 2014

  - by Testas

  Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again?  Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1.       Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2.       Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well.   3.       Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms?  Yes/No. What is the maximum number of terms a candidate could serve?   It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw.   So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections.   It would be good to hear your thoughts   Thanks   Chris

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >