Search Results

Search found 23435 results on 938 pages for 'i give terrible advice'.

Page 458/938 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• HP EliteBook 8440P - USB ports stop working on docking station

  - by r0ca

  I have a HP Elitebook 8440P running Windows XP Pro SP3. I installed it on my docking station and everything went smooth for a while. Last week, my mouse and any other USB devices stoped working sudenly... It was working fine on my laptop itself but nothing on my docking station. LCD attached monitor works and same for LAN and PS2 keyboard. I updated the BIOS, Chipset, Video Drivers, also changed my docking station by a brand new one but the problem still comes back. I also noticed something in Device Manager... A Generic USB Root Hub has an error on it, a Yellow/Orange exclamation mark. I tried to update that driver but no luck. Windows is unable to process it. This seems to be the problem but can't fix it. I may only re-image my laptop but for me, I need to avoid that since I have so many apps installed on it. If anybody has any advice, I'll take it!

  Read the article

• How to redirect a name-based VirtualHost to a different port?

  - by Andra

  I have a virtuoso sparql endpoint installed, which I want to make available through a hostname (e.g. www.virtuosoexample.com). The thing with virtuoso is that the is no Document root. The endpoint is initiated by the daemon and made available through a source port (e.g. localhost:1234/) I know how to set a virtual host pointing to a document root, but i don't know how to do this for a server with a port number. Any advice would be appreciated. Below is the code, how I would do it with a document root. I tried to change that (naively) into localhost:1234/sparql, but that didn't work <VirtualHost * ServerName www.virtuosoexample.com <www.virtuosoexample.com> ServerAlias www.virtuosoexample.com <www.virtuosoexample.com> ErrorLog /var/log/apache2/error.wp-sparql.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.wp-sparql.log combined DocumentRoot /var/www/endpoint/sparql/ <Directory /var/www/endpoint/sparql> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost

  Read the article

• SSD as primary or secondary drive on a small Linux server?

  - by Alex Martelli

  I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

  Read the article

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• My SSD stopped working as it ends up in blue death right after windows 7 launches, how can I reset it for new windows install?

  - by HattoriHanzo

  As I mentioned in the title my SSD suddenly started to fail as after launching Windows 7 it goes straight to completely idle and after a few minutes it goes to blue death and restarts. I have an another HD with a windows xp on it and it works fine and I can also see the SSD and can access everything on it. Windows 7 on the SSD does work in safe mode though yet I didn't manage to find out what causes the problem. Since I can sill access the files and save them to another HD I'm looking for the best way to wipe and reinstall Windows 7. I have yet failed to find an easy to follow (or even understand) guide, different sources on the internet recommend different ways of doing this. And some guides are just simply full of terms I have no clue about. It's an OCZ Vertex 2 120GB. I"d very much appreciate if someone could give me an advice on what I should do, preferably in a way so I could regain the best possible performance as well. it doesn't matter if I don't understand the science behind it as long as I can follow the steps. Thanks!

  Read the article

• Losing SQL connections

  - by john pavelka

  sql servr 2005 - Standard; one dedicated sql server (VM); windows server 2003; Small databases; About once a week we lose all sql connections. It seems to fix itself after about 5-10 minutes. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. We don't have a fully qualified DBA; it's kind of a joint effort here. Can somebody give me some general ideas for troubleshooting the network side and the application side? We already ran a few tuning profiles and ran through Database Tuning Advisor to apply indexing recommendations. It would sure be nice if there was a way to take a snapshot of what was running on sql server when these 100% cpu spikes occured, but sometimes we're not around. Is it common to throttle CPU for certain processes? Can this be done with Windows server 2003? For example, if security apps were making cpu spike to 100%, is there a way to limit their cpu usage? Any advice is appreciated. thanks,

  Read the article

• What Media Extender / Centre Set up should I use?

  - by Bryn Hird

  I have installed cat6 throughout the house which I use for telephony and network. In my cellar I have a NAS Server, gigabit switch and I want to install a Media Centre to stream my video's, music, photo's and live TV (coax from the aerial to the cellar) over the cat6. Yeah I know I can get stuff on the internet but shared experience of watching TV as a family as it happens is a big plus for live TV. I'm aiming for 1080p. I want different users to be able to watch different channels. Max users = 4. I've played a little with Windows Media Centre, works fine with live TV. Likewise I have XBMC up and running with live TV. The issue I have is what do I put near the TV. I'd like a consistent user interface (grandma and the the other technophobes in the house are continually pestering me on how to use different TVs, change channel, inputs etc.) so a key part of this for me is to make the user experience the same and simple i.e. no keyboards / PCs hanging around the TV. I've just bought a Linksys DMA 2200 to test the Windows Media Centre, but obviously off eBay as they're a dying breed. And with Windows Media Centre removed from Microsoft plans such devices will get rarer. And as for 1080p, think I can forget it with that set up. I have tested XBOX 360, also works but ditto on Microsoft plans for WMC. I was thinking of a WD Live TV to test the XMBC setup. Now to the question. Any advice on Media Centre / Extender setups that will do the job as above and have some degree of futureproofing (building my own with my Raspberry PI is a last resort). I'd like to understand the standards involved in the futureproofing if anyone knows (DNLA, RVU etc.).

  Read the article

• Servers/Websites Keep Going Down

  - by Tyler Johnson

  Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps Type: Linux

  Read the article

• Migrating from one linux install to another: How to keep the second disk around?

  - by Jim Miller

  I've got a linux box running Fedora 19 that I want to move to CentOS 6.4. Rather than trying to do something fancy with the current disk (which has also accumulated a lot of sludge over the years), I'm going to get a new disk, put CentOS on that, and then move the to-be-preserved bits of stuff from the old disk to the new one. I haven't done this yet, but I presume it should be semi-straightforward -- do the CentOS install on the new disk, mount the old disk on /olddisk or somesuch, and start copying. However, I'm not sure how to handle getting the machine to recognize the new empty disk as the target of the CentOS install (I suppose I can just pull the old disk during the installation), remember that this is the intended boot disk once the install has happened), and tweak /etc/fstab (right?) to set up the old disk on the desired mount point. (Both disks are, or will be, SATA.) I could probably hack it together without losing too much hair or doing too much damage, but could anyone offer some advice that would get/keep me on the right track? Thanks!

  Read the article

• Shoretel Upgrade Path

  - by Brian

  I currently have a Shoretel Server running Server 2003 x32 as a virtual machine paired with a ShoreGear 90 switch and another unused switch of the same model being reserved for manual failover. I am getting the software mailed to me from my partner, but with limited support since the server is in a relatively remote area. I am tempted to upgrade the OS at the same time as performing the upgrade, but want to know if there are any horror stories or advice I should know about before diving in. I'm upgrading from Shoretel 9.2 Build. I will be upgrading first to version 10.1 then finally to 11.1. The system has been bullet proof since it was installed and we are upgrading mainly to get a client that is a little more modern. My question boils down to: Should I even bother with an OS upgrade or even possibly a fresh install of Windows with an install of Shoretel 11.1 and just transfer the configuration? Should I just stay with Server 2003 since it is supported in my target version of Shoretel and the upgrade will be more than enough to keep me busy as a novice?

  Read the article

• NGINX: How do I calculate an optimal no. of worker processes and worker connections?

  - by bodacious

  Our web app is running on a Linode 2048 server at the moment (~ 2048 GB of RAM) The MYSQL database is on another linode of it's own so this server is really only handling NGINX and and the Rails application. The application itself uses about 185976 of memory per instance (RSS). Our traffic is < 1000 per day and the pages are mostly cached so there are fewer hits to the rails app itself. My question is - how can I calculate optimal NGINX config settings for my app? Below is the current config: worker_processes 1; # pid of nginx master process pid /var/run/nginx.pid; events { worker_connections 1024; } http { access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; passenger_root /home/user/.rvm/gems/ree-1.8.7-2011.01@URTV/gems/passenger-3.0.3; passenger_ruby /home/user/.rvm/rubies/ree-1.8.7-2011.01/bin/ruby; include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay on; # gzip settings gzip on; gzip_http_version 1.0; gzip_comp_level 2; gzip_vary on; gzip_proxied any; gzip_types text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; # load extra modules from the vhosts directory include /opt/nginx/vhosts/*.conf; } Any advice would be appreciated! :)

  Read the article

• Certificates in SQL Server 2008

  - by Brandi

  I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• How can I start hostednetwork on Windows 7?

  - by Pirozek

  When I type in admin console command to start hostednetwork netsh wlan start hostednetwork it gives me this: The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation. There is a hotfix from Microsoft but it didn't help me. Any advice? C:\Users\Pirozek>netsh wlan show driver Interface name: Wireless Network Connection 3 Driver : D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev .B) Vendor : Atheros Communications Inc. Provider : Atheros Communications Inc. Date : 8.7.2009 Version : 8.0.0.171 INF file : C:\Windows\INF\oem108.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP

  Read the article

• TCP dies on a Linux laptop

  - by Roman Cheplyaka

  Once in several days I have the following problem. My laptop (Debian GNU/Linux testing) suddenly becomes unable to work with TCP connections to the internet. The following things continue to work fine: UDP (DNS), ICMP (ping) — I get instant response TCP connections to other machines in the local network (e.g. I can ssh to a neighbour laptop) everything is ok for other machines in my LAN But when I try TCP connections from my laptop, they time out (no response to SYN packets). Here's a typical curl output: % curl -v google.com * About to connect() to google.com port 80 (#0) * Trying 173.194.39.105... * Connection timed out * Trying 173.194.39.110... * Connection timed out * Trying 173.194.39.97... * Connection timed out * Trying 173.194.39.102... * Timeout * Trying 173.194.39.98... * Timeout * Trying 173.194.39.96... * Timeout * Trying 173.194.39.103... * Timeout * Trying 173.194.39.99... * Timeout * Trying 173.194.39.101... * Timeout * Trying 173.194.39.104... * Timeout * Trying 173.194.39.100... * Timeout * Trying 2a00:1450:400d:803::1009... * Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable * Success * couldn't connect to host * Closing connection #0 curl: (7) Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable Restarting the connection and/or reloading the network card kernel module doesn't help. The only thing that helps is reboot. Clearly something is wrong with my system (everything else works fine), but I have no idea what exactly. I don't know how to reproduce this, but as I said, it happens every several days. My setup is a wireless router that is connected to the ISP via PPPoE. Any advice?

  Read the article

• Why am I experiencing random connection timeouts? (CentOS)

  - by Ryan

  I have a CentOS server setup that currently hosts several websites (all relative of each other in some form or another). As of recently throughout the day at the most random times the website speed will lag to a crawl and eventually hit a connection timeout. When I say random times this typically happens anywhere between 10am and 1pm usually, however, this morning this happened to me at 8am. I do not have a lot of familiarity with server knowledge as far as what I am looking for in this situation. What are some possible causes of why my server is slowing the websites down to a complete crawl or timing out? Are there specific things I should be checking for when this happens? I have noticed using: tail /var/log/httpd/access_log That usually when this down time occurs there are lot of IP addresses related to BingBot, Googlebot, and sometimes various bots or spiders that I am unfamiliar with. Could this be related and if so how can I avoid this from causing my websites to lag out? Thanks in advance for any help or advice. The websites that are timing out are built with PHP and use a MySQL database to display information.

  Read the article

• Steps to debugging web site latency and timeout issues

  - by Paperjam

  I have a client who has multiple offices around the country, all of which share the same Internet connection via their WAN. One specific office for this client is experiencing severe latency and timeout issues with my web site. Most, but not all, of the latency occurs on a specific ASPX page where multiple postbacks are made while populating cascading dropdown lists (rapid form submits). The latency is sporadic and can be anywhere from a few seconds to a full timeout. There is no indication that the timeouts are occurring on the server's end. The IT guy for this client is having trouble narrowing down the problem. Since it is affecting only one location for one client, I am led to believe it is not something with my site but something specific to that location. He's measured ping times while using the site and has noticed no real variance in ping times even when the page has timed out. I believe this may be being caused by some sort of Internet filter that doesn't like rapid form submits, but beyond a hunch I haven't a clue. My question is what things should I tell the IT guy to look for? While I'm not trying to provide active tech support for this issue, I would at least like to glean an understanding of what is going on and try to offer some sort of advice. Thank you.

  Read the article

• Partition problem tyring to install window 7 starter

  - by ant2009

  Hello HP Mini 210 I am trying to install windows starter 7. Currently I have installed fedora 14 xfce. And I have allocated 24 GB NTFS for hard disk for the windows partition. My current partitions are as follows: /dev/sda2 97G 4.9G 91G 6% / tmpfs 494M 92K 494M 1% /dev/shm /dev/sda1 485M 68M 392M 15% /boot /dev/sda5 169G 26G 135G 16% /home I have created a boot USD to install windows starter 7. When the computer boots into the windows setup and I selected the partition I want to install windows on. I get the following message: "Setup was unable to create a new system partition or locate an existing system partition." This is setup displaying all my partitions: Disk 0 Partition 1 500MB 0 Primary Disk 0 Partition 2 97.7GB 0 Primary Disk 0 Partition 3 4GB 0 Primary Disk 0 Partition 4 171.3GB 0 Logical Disk 0 Partition 5 24.6GB 24.5 Logical <-- Trying install on this partition NTFS I have also tried to delete the partition in setup and create a new one. And also tried to format the partition. However, I still get the same error message. Many thanks for any advice,

  Read the article

• Postgresql Data Aggregation over WAN Securely

  - by Zach

  Hey guys, Need some advice on how to proceed with this situation: My current scenario is that I have several postgresql (50+) boxes deployed throughout various locations and data centers and a beefy postgresql box setup at a homebase location. All of the deployed boxes have identical database layouts. I'm looking for a solution that would allow for a few things. I realize some of these options overlap and some might only contain mutually exclusive solutions. However, I'm interested to hear your thoughts :) Remotely query the deployed boxes and pull the results back to the homebase box for processing. Nightly (remote) "sync" or dump the deployed boxes' databases to a master database on the homebase box. Remotely push a table entry to all of the deployed boxes from the homebase box. Ensure security of data in transit, and remotely deployed boxes. Up to this point I've been floating on a homebrew multithreaded python/perl system that SSH's into these boxes remotely, which are ACL'ed off to the homebase server and pulls (or pushes) the raw query results over the ssh connection. I have even touched #2 (remote syncing) as I know that would get nasty really quick. I'm interested in any ideas for a more elegant solution that can scale up and stick to my FreeBSD/Linux environment.

  Read the article

• How to install Delorme StreetAtlas (any version) + GPS inside VirtualBox VM?

  - by hotei

  When I try to run the install program I get a popup message that says the installer program is not a valid executable. Background: I want a GPS with maps on my laptop running Ubuntu 10.4LTS. Unfortunately I can't find a decent native Linux GPS solution with 50 state US street level coverage. I have VirtualBox VMs available for WinXP and Win7 (among others). The VMs work fine with MicroSoft Streets and Trips (2010) and MapNGo 5 (a very! old Delorme product), but while both these products support GPS, they don't support the Earthmate LT-40 USB GPS I already have. I've got pretty much every Delorme Street Atlas they've released in the last decade and none of them will install in a VM. Any help would be much appreciated. Clarification: I've installed the Delorme products from these CDs before and the disks are fine - as long as installation is done on a "physical" machine. Added: I've tried install from an iso as well as the real CD. No difference in result (setup.exe is not a valid executable) The WinXP is SP-2 (held back on purpose at this point - I'll snapshot and fork a later SP to test). The Win2K is SP-6a. Win7(32) VM is whatever updates came out last week. The USB setup is working at least to the point where the GPS device is active in the device list (has an x in the box). At this point its not relevant because the program that needs to read it can't even be installed. Added 9-19: Added wine as harrymc suggested. Initial result was no change. Here's wines error message. The file '/media/Disk1/setup.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit. At first I thought the execute bit was the problem, but looking at several other windows CDs I see that the execute bit is not set on their exe files (which install to VM without error). Still it was worth a shot so I copied the StreetAtlas 9 DVD to my hard disk, changed the on-disk exe files to have the execute bit set and tried to install again. This time the install via wine got me through the installation process. When I start the program it bombs immediately, so we haven't made much real progress so far. I very much prefer the VM solution to wine, so I'm going back to that for now. To recap the VM situation, using an updated XP with SP3 and all recommended hotfixes: StreetAtlas 2009 USA fails with "not marked as executable". StreetAtlas 2007 USA fails with "not marked as executable". StreetAtlas 9 (copyright 2001) fails with "not marked as executable". SteeetAtlas (copyright 1991) fails with "not marked as executable" Delorme Topo 4 (copyright 2002) fails with "not marked as executable". Just about ready to give up. So I switched from XP VM to Win7 VM and tried StreetAtlas 2009 again. This time it installs. Earthmate USB GPS works. WTH? I feel like the monkey who just wrote a line of Shakespear. I'm smiling because it worked, but I have no clue why. I'm awarding the bounty to harrymc because wine did give some useful insight into the problem and a +1 to goyiux as thanks for helping.

  Read the article

• ADSL2+ - High sync-rate, good line attenuation, but low noise margin and slow speeds

  - by Mark Pim

  I've been with my ISP (IdNet) for a few months and have been getting some good speeds, but in the last week the speed has dramatically decreased (from 15 Mbps+ to around 0.2 Mbps). This happens at all times of day, not just peak periods. Obviously I've done all I can to isolate problems my end - only one PC is connected to the router (via ethernet cable) and no other background programs are using the network etc. I've raised the issue with the ISP and they've suggested trying a new ADSL filter to see if that is casuing the problem, but I thought it would also be good to get the opinion of superuser on possible causes or other troubleshooting I can do. Here are the juicy stats :) My router (Netgear DGN1000) reports: Downstream Upstream Connection Speed 17602 kbps 1062 kbps Line Attenuation 17.9 db 8.6 db Noise Margin 6.0 db 6.1 db I used RouterStats and it seems to show those figures stay fairly consistent all the time I ran the BT speedtest and it reported: download speed of 164 kbps, out of a max achievable of 21000 kbps upload speed of 859 kbps, out of 1048 kbps DSL connection rate 17719 kbps down and 1048 kbps up IP Profile of 15000 kbps Is there any more troubleshooting I can do? Does this look like a problem with my equipment / wiring or with BT's line? Any advice would be great :)

  Read the article

• Servers - Buying New vs Buying Second-hand

  - by Django Reinhardt

  We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

  Read the article

• Cloning a git repository from a machine running OS X

  - by Mike

  Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

  Read the article

• Which default Database Systems come installed in Microsoft VS2010 Express?

  - by Tonygts

  Appreciate all advice 0n the following questions Which database systems (Ms SQL 2008, MS SQL Compact, or others) comes installed with VS2010 Express edition. SQL Server 2008 R2 Express is free, can we install and integrate with VS2010 Express? How to uninstall those database already come installed? I have installed VS2010 express on Windows 7; just VS2010 components (VB, C#, C++ and Web Developer) and without installing any other things like SQL Express. In the Console Panel-Program & Features' window, the installed list is shown below: Microsoft SQL Server 2008 Setup Support File Microsoft SQL Server 2008 Browser Microsoft SQL Server VSS Writer Microsoft SQL Server Database Publishing Wizard 1.4 Microsoft ASP.NET MVC2 - VWD Express 2010 Tools Microsoft SQL Server 2008 Management Objects Microsoft SQL Server Compact 3.5 SP2 ENU Microsoft SQL Server System CLR Types Microsoft Silverlight 3 SDK Microsoft ASP.NET MVC 2 Microsoft Visual Studio 2010 ADO.NET Entity Framework Tools Visual Studio 2010 Tools doe SQL Server Compact 3.5 SP2 ENU Web Deployment Tool Microsoft Visual Web Developer 2010 Express - ENU Microsoft Visual C++ 2010 Express - ENU Microsoft Visual C# 2010 Express - ENU Microsoft Visual Visual Basic 2010 Express - ENU Microsoft SQL Server 2008 As you can see, Microsoft SQL Server 2008 (last line) and near the top, Microsoft SQL Server Compact 3.5 SP2 ENU and many of their related SQL components such as Microsoft SQL Server 2008 R2 Management Objects are also installed. These are actually installed by installing VS2010 Express, but I have no idea how to use them or verify their valid existence from VS2010. Also, do I have to uninstall them before I install SQL Server 2008 R2, which is the latest version I believe? And what tool is needed to manage and create data source and tables?

  Read the article

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >