Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 462/750 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Monitoring host and app parameters in real-time

  - by devopsdude42

  I have a bunch of VMs that I need to monitor in real-time. For all nodes I need to watch host parameters like load, network usage and free memory; and for some I need app-specific metrics too, like redis (some vars from the output of INFO command) and nginx (like requests/sec, avg. request time). Ideally I'd also like to track some parameters from the custom apps that run on these node too. These parameters should get tracked as a bunch of line charts on a dashboard. I checked out graphite and it looks suitable (although the UX and aesthetics looks like it needs some love). But setting up and maintaining graphite looks to be a pain, esp. since we don't have a full-time person just for this. Are there any alternatives? Or at least something that is simpler to setup and will scale? Reasonable paid services are also ok.

  Read the article

• How to get cluster information remotely via Powershell?

  - by pdanke

  I've been trying to find a good way to gather various pieces of a windows cluster setup remotely, preferably via WMI, as we are not yet at a point where Powershell remoting is implemented (and I know this problem goes away with that). I know I can use the following to get the current node: Get-WmiObject Win32_ComputerSystem -ComputerName RemoteServer1 | Select Name I also need the name property of Get-Cluster, which I can't figure out how to get from a remote system. Is there something out there, or should I wait it out until Remoting gets implemented? I'm a newbie to all things clustering, just a dba looking to inventory our servers properly. Thanks for any help!

  Read the article

• Removing partition to install OS?

  - by Shane

  So i have a computer that has 2 hard drives and i installed Ubuntu server on it. I used LVM to connect the two. So i tried to put windows back on it but it failed because it said it couldn't position the drive and then when i booted again the OS couldn't be found. So i booted it with the Ubuntu setup disc but now when it goes to partition it says that the position can not be modified because its already in use. I am asking if there is a way i can just remove everything and start fresh?

  Read the article

• How to change password schema for Dovecot user authentication for an already existing mail server

  - by deb_lrnr

  Hello, I have an email server setup on Debian Lenny with Postfix, Dovecot, SASL and MySQL. Currently, the password scheme in my dovecot-sql.conf file is set to: CRYPT default_pass_scheme = CRYPT I would like to globally change the scheme to something stronger like SSHA, or MD5-CRYPT and re-hash all passwords with SSHA. What is the best way to do this? The Dovecot wiki mentions how passwords that don't follow the default scheme defined in dovecot-sql.conf can be prefixed with "{ssha}password", but I couldn't see anything regarding changing an already-existing scheme to a new one for all passwords that are already in the database. Thanks for your help!

  Read the article

• Windows 8 install shows NTFS partition but asks for driver

  - by Guillermo Orellana Ruiz

  I have an Asus Eee PC 900HA, and I tried to install Windows 8 on it, so I created a 56GB NTFS partition and booted install from USB When I get to install it, says "some drivers are missing", but when I click Explore button, I can see the NTFS partition. I have updated the BIOS to its lastest version in Asus Support, loaded setup defaults, downloaded all the drivers I saw there and put them into the USB, but keeps asking for drivers. The BIOS has no option for the HDD to be IDE or AHCI, only Auto, ARMD and CDROM are available. Thank you very much.

  Read the article

• Is there an application that can automatically set Graphics Properties when docking?

  - by Ken Liu

  I have a dual display setup with my laptop (Dell, with integrated graphics, WinXP). The problem is that whenever I hook up the laptop to the monitor I have to go to Graphics Properties (Intel Graphics Media Driver for Mobile) and set the display resolution, window position, etc. Note that this screen is different than the built-in one you usually see in WinXP. 1) Is there an app that can save display settings properly so they will come back when I dock again? 2) Barring this, run a script or a macro to automatically set up the display the way I want it. 3) Or, can I write a .Net program that does this for me? Extra points if there is an Open source app that can do this.

  Read the article

• CHROOT for shell script testing

  - by Josh

  I am looking at setting up a shell script in order to properly document and automate the process I am using to setup a few servers we have. In order to test the shell script through its different stages I was thinking a CHROOT would be ideal, since I can wipe out the "virtual root" and create it on the fly. I have never used CHROOT before, however. I was just curious what are the exact steps I would need to follow to implement this process of creating a chroot (with the basic core functions that would be needed to install apache/php/etc.)? and then destroying it?

  Read the article

• Vetting Github Pull requests with Hudson

  - by cdecker

  I've been using Gerrit and Hudson very successfully to test and automatically vote on new checkins in the past and now I'm wondering whether it is possible to set up Hudson so that it'll check Github at regular intervals and looks if there are new Pull Requests available. If yes it should apply the patch and run the unit tests against it, adding a comment to the pull request if no failure is detected. It would certainly reduce the amount of work going into vetting patches/pull requests. Is that possible at all, or should I stick with my Gerrit setup?

  Read the article

• Windows Server vs Sharing

  - by Mark Lawrence

  Not sure if this is the right place for this question. I have a friend that owns a small business running 3 local machines, that are connected to the internet, and a server that each local machine connects to. He has recently bought a newer server, and by server I mean a Windows Vista box. He wants to use this purely to store data that the 3 local machines can access, kind of like a glorified external hard drive. Im suggesting to fore-go the server option and simply setup sharing on the 'server' box. Interested in hearing any suggestions as to whether the server idea is preferable?

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• How to programmatically control slave computer on BIOS level?

  - by PovilasSid

  I want to run some test on hardware level. My goal is to create or find a way to control one computer from another down to BIOS settings changing. For example: Master computer sends a signal for slave to restart and opens BIOS settings dialog. Master computer sends a signal to slave to change BIOS parameters and then restart. Then slave fully boots up master starts up some software on slave. Then software finishes operations cycle continues till certain conditions are met. I know that I am looking for a complex thing but mainly what I need are correct keywords because now I am being flooded by BIOS configurations tutorials. Main concerns: Is it possible without using any custom tailer chip? How can master monitor salve`s hardware activity? How to let master handled more than one slave? How what connections are needed to create this kind of setup? (cables)

  Read the article

• View Public Key in Domain Key for a Domain

  - by Josh

  Using Jeff's blog post I'm creating domain keys for my account. I wanted to verify the setup using Get or Host command with Bind for Windows but I'm lost one of the commands. I can see view the _domainkey. txt file with this command: host -t txt _domainkey.stackoverflow.com but I'm at a loss at how I'd find the selector record. Jeff points out it can be anything before the before the period in "._domainkey.domain.com" but how would I list all records if I didn't know the exact query name? Is there a wildcard I could use to view all TXT or all records under this section?

  Read the article

• how to detect device type from connected device to router?

  - by molly

  i have a att router and there is an unknown device connected to my network. i cant seem to kick it off because of how att's router settings are created which is kind of dumb. i am able to see its local ip and mac address. i am on a mac with snow leopard. how can i get more information on the device with the information that i have? i want to see what kind of device it is, i have checked all deviced that are connected to the router and non seem to match the local ip that is connected. i have wpa encryption setup with a strong password.

  Read the article

• Work Execution in EAM

  - by Annemarie Provisero

  ADVISOR WEBCAST: Work Execution in EAM PRODUCT FAMILY: Manufacturing Enterprise Asset Management July 5, 2011 at 8 am PT, 9 am MT, 11 am ET The purpose of this webcast is to discuss EAM Work Order Management. This one-hour session is ideal for Functional Users, System Administrators, Database Administrators, and Customers with a basic knowledge of EAM and who raise or manage work orders and related processes. During this webcast, Zar will cover the various types of work orders and look at all the related activities associated with work orders including: setup, operations, tasks, work order transactions, relationship and planning. TOPICS WILL INCLUDE: Work Order Types (Routine, Planned Maintenance, Rebuild, Easy) Work Order statuses and other important setups Operations and Tasks Relationships Work Order Transactions Work Order Planning A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• any security tips for my first server? (complete beginner)

  - by Haroldo

  I'm paying for a VPS and hoping to launch my first website on it in the next few days. I'm worried there might be some glaringly obvious security holes in the standard setup, so I'm keen to get some tips About the only thing i know is turn off error reporting in PHP and create users/privilages for MySQL... any more stuff along those lines? I'm using: cpanel and WHM centos 5 php mysql google apps as mail server (so maybe i should disable built in mailer server somehow?!!) This is my first post of Server Fault (i use stack overflow alot), I hope i'm posting this in the right place, with the right tags - please feel free to edit if i'm wrong. Thanks guys!

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• yum-updatesd problem

  - by smusumeche

  I am trying to setup yum-updatesd to send email notification when there are updates available to the packages on my system. However, I am not receiving any notifications even though there are updates available (as seen in yum check-update) I have verified that the yum-updatesd service is running. This is my /etc/yum/yum-updatesd.conf: [main] # how often to check for new updates (in seconds) run_interval = 3600 # how often to allow checking on request (in seconds) updaterefresh = 600 # how to send notifications (valid: dbus, email, syslog) emit_via = email email_to = [email protected] email_from = [email protected] # should we listen via dbus to give out update information/check for # new updates dbus_listener = yes # automatically install updates do_update = no # automatically download updates do_download = no # automatically download deps of updates do_download_deps = no

  Read the article

• print job doesn't go to print queue

  - by flatsguide

  I have two printers hooked up to my intel imac. I am having a printing error. It seems that whenever i try to print (a simple text doc) I am unable to get the print job to go to print queue with one of my printers. I have a HP c7280 and a HP c3100. I am able to get one working properly, but the other doesn't seem to allow it to go to the print queue. I have switched usb cables (with the printer that I know works) and both printers are recognized by the computer in the printer preferences pane. I've tried reseting the printer system in the printer setup utility.. reloaded the drivers from HP.. etc. If anyone has a suggestion or could point me to a little help i'd be VERY grateful Best Regards.. B

  Read the article

• Saving Photoshop workspace doesn't remember docked panel state

  - by johnh

  A friend of mine has recently setup his computer with a fresh install of Windows 7 and Photoshop CS5. He's having a strange issue with saved workspaces not remembering the state of docked panels. As an example, he's docked several panels on the right of the screen. The Layers panel is docked but is open, showing all layers in the document. If he saves this as a workspace, closes and reopens Photoshop and loads the workspace, the Layers panel is docked but is closed. It's not the only panel this is happening with. It's not a big problem but he's having to open 4 panels and drag them to the appropriate height each time he starts Photoshop. Does anyone know of a possible fix for this? Any insight would be great.

  Read the article

• Process for migrating Dropbox to SpiderOak

  - by Marcel Janus

  I want to move my data from dropbox to SpiderOak. I have 3 computers running dropbox. But I have a poor WAN connection with very limited upload bandwidth. So I thought I do as first step install the dropbox client on my server on the internet an download there my data from dropbox. Then after this I upload/backup my data from this server with a broadband connection to SpiderOak. After the backup is completed I setup the sync between my 3 computers so that they will not have to upload the data again. Will this process will work so that I don't have to upload my data again over my WAN connection at home?

  Read the article

• vncviewer connection refused (61)

  - by coure2011

  I have a root access to VPS (centos 6). I have installed VNCServer using this guide line http://tournasdimitrios1.wordpress.com/2011/02/02/how-to-setup-vnc-server-on-centos-5-x-fedora-11/ Everything goes perfectly and server is running via termina. Now I am trying to connect to that server via vncviewer (mac os). but its giving me error Connection refused (61) I am providing only the IP address of the VPS, maybe I also needed port address? How to configure port on vncserver? or its something else?

  Read the article

• Successful su for user by root in /var/log/auth.log

  - by grs

  I have this sorts of entries in my /var/log/auth.log: Apr 3 12:32:23 machine_name su[1521]: Successful su for user1 by root Apr 3 12:32:23 machine_name su[1654]: Successful su for user2 by root Apr 3 12:32:24 machine_name su[1772]: Successful su for user3 by root Situation: All users are real accounts in /etc/passwd; None of the users has its own crontab; All of those users are logged in the machine some time ago via SSH or No Machine - time varies from few minutes to few hours; no cron jobs are scheduled to run at that time, anacron is removed; I can see similar entries for other days and other times. The common part is the users are logged in when it appears. It does not appear during login, but some time afterwards. This machine has similar setup with few others but it is the only one where I see these entries. What causes them? Thanks

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• Q: MySQL Cluster - Data insertion in NDBCLUSTER table - error out after 5 million rows

  - by Mata

  MysqlCluster version: mysql-5.6.11 ndb-7.3.2 Insertload = 50 M dataset Datanodes = 3 LOAD DATA INFILE '/input_50m/Table_1_sorted.csv' IGNORE INTO TABLE nw_ndb FIELDS TERMINATED BY ',' LINES TERMINATED BY '\n' We recently setup a new mySQL cluster and trying to load data from a flat file. But getting error “Got temporary error 4010 'Node failure caused abort of transaction' from NDBCLUSTER" when inserting 5 million rows in a single table in MySQL Cluster. We are using "LOAD DATA INFILE" command to load the data in the table from csv file. Server (musqld, ndb nodes) has good hardware: 126 GB RAM, 32 Gb allocated to mysqld tried below settings with no effect: SET autocommit=0; SET FOREIGN_KEY_CHECKS=0; SET unique_checks=0; SET GLOBAL ndb_batch_size=8*1024*1024; SET GLOBAL ndb_cache_check_time = 1000; SET GLOBAL ndb_index_stat_cache_entries = 10000000; SET SESSION BULK_INSERT_BUFFER_SIZE=256217728; SET GLOBAL KEY_BUFFER_SIZE=256217728; Any clues?

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >