Search Results

Search found 13586 results on 544 pages for 'trusted domain'.

Page 463/544 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

  • PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

    - by athspk
    I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

    Read the article

  • What exactly is a X-YMailISG header?

    - by iainH
    Finally ... our emails are being seen by Yahoo! not as junk anymore. Hurray! However I notice that the Yahoo! receiving MTA adds in a X-YMailISG header. It's very large ... 2**10 bits? Now that I've invested too large a chunk of my waking life in crafting our email headers I'm curious to know what an X-YMailISG header is. Can anybody tell me? Does it pose any security / authenticity issues? There's very little intelligible from Google results. Background: After many days tweaking TXT records in our domain's DNS zone file for SPF and DKIM, I have at last succeeded in generating email from our Drupal site that Yahoo! no longer marks as X-YahooFilteredBulk and the excellent service [email protected] returns results that show the emails passing SPF, DKIM and Sender-ID checks and appearing to SpamAssassin as ham. Yahoo! even adds a Received-SPF: pass header. Useful links: http://www.goldfisch.at/knowwiki/howtos/dkim-filter http://old.openspf.org/wizard.html Strangely enough the SPF TXT record needed / allowed a blank key / name field in our registrar's DNS management panel whereas the DKIM record needed the {selector}._domainkey as the key /name of the DKIM strings.

    Read the article

  • SCCM 2012 - Windows 8 WSUS

    - by Owen
    We're using SCCM 2012 to deploy Windows Updates on our domain, and our Windows 8 clients have started failing with error 80240438 when they try to update. Windows 7 clients update fine, but Windows 8 clients refuse to do anything. I've done a search online and it seems to only reference Windows InTune. Has anyone seen any similar behavior on Windows 8 machines? If we don't get that error, we're getting 80244021 which seems to indicate that the server can't be found.... but they can resolve it just fine and our exceptions are defined on the proxy too. A bit stuck here! 2012-11-22 14:45:28:935 476 998 Agent ********* 2012-11-22 14:45:28:935 476 998 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-11-22 14:45:28:935 476 998 Agent ************* 2012-11-22 14:45:28:935 476 998 Agent WARNING: WU client failed Searching for update with error 0x80240438 2012-11-22 14:45:28:935 476 c74 AU >>## RESUMED ## AU: Search for updates [CallId = {EAECB947-48AC-43BE-8F98-C44727E4A131} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}] 2012-11-22 14:45:28:935 476 c74 AU # WARNING: Search callback failed, result = 0x80240438 2012-11-22 14:45:28:935 476 c74 AU ######### 2012-11-22 14:45:28:935 476 c74 AU ## END ## AU: Search for updates [CallId = {EAECB947-48AC-43BE-8F98-C44727E4A131} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}] 2012-11-22 14:45:28:935 476 c74 AU ############# 2012-11-22 14:45:28:935 476 c74 AU All AU searches complete. 2012-11-22 14:45:28:935 476 c74 AU # WARNING: Failed to find updates with error code 80240438 2012-11-22 14:45:28:935 476 c74 AU AU setting next detection timeout to 2012-11-22 04:12:23 2012-11-22 14:45:33:936 476 c9c Report REPORT EVENT: {EE35CD79-FD2A-472D-BFC9-0420F5D60C04} 2012-11-22 14:45:28:935+1300 1 148 [AGENT_DETECTION_FAILED] 101 {00000000-0000-0000-0000-000000000000} 0 80240438 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x80240438. 2012-11-22 14:45:33:938 476 c9c Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2012-11-22 14:45:33:938 476 c9c Report WER Report sent: 7.8.9200.16420 0x80240438 00000000-0000-0000-0000-000000000000 Scan 101 Managed 2012-11-22 14:45:33:938 476 c9c Report CWERReporter finishing event handling. (00000000) Thanks in advance

    Read the article

  • Windows CE 6.0 time setting in registry being overrided

    - by JaminSince83
    I have asked this question on stack overflow but its probably better suited here. So I have a Motorola MC3190 Mobile Barcode scanning device with Windows CE 6.0. Now I want to get the device to sync its date/time on boot up with our domain controller using a registry file that I have created. I have used this registry file below to get close to what I require. REG 1 REGEDIT4 [HKEY_LOCAL_MACHINE\Services\TIMESVC] "UserProcGroup"=dword:00000002 "Flags"=dword:00000010 "multicastperiod"=dword:36EE80 "threshold"=dword:5265C00 "recoveryrefresh"=dword:36EE80 "refresh"=dword:5265C00 "Context"=dword:0 "Autoupdate" = dword:1 "server" = "NAMEOFMYSERVER" "ServerRole" = dword:0 "Trustlocalclock" = dword:0 "Dll"="timesvc.dll" "Keep"=dword:1 "Prefix"="NTP" "Index"=dword:0 [HKEY_LOCAL_MACHINE\nls] "DefaultLCID" = dword:00000809 [HKEY_LOCAL_MACHINE\nls\overrides] "LCID" = dword:00000809 [HKEY_LOCAL_MACHINE\Time] @ = "UTC" "TimeZoneInformation"=hex:\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 [HKEY_LOCAL_MACHINE\Time Zones] @ = "UTC" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock] "AutoDST" = dword:00000000 Now it gets the correct date and shows the time zone correctly however the time is always 5 hours behind on Eastern Standard Time, which is really annoying. I have researched heavily into this and this question has been asked before here As you will see I have copied what it suggests but it doesnt work. Something is overiding the time which I dont understand enough about to resolve. I cannot find any other setting to get it to set the time correctly. Any help would be greatly appreciated.

    Read the article

  • Cannot create a project TFS 2012 - TF218027

    - by GrandMasterFlush
    I've just installed TFS2012 and am trying to create a new project in the default collection via Visual Studio 2012 but I keep getting this error message: TF218027: The following reporting folder could not be created on the server that is running SQL Server Reporting Services: /TfsReports/DefaultCollection. The report server is located at: http://<servername>/Reports. The error is: The permissions granted to user '<domain>/grandmasterflush' are insufficient for performing this operation.. Verify that the path is correct and that you have sufficient permissions to create the folder on that server and then try again. I've checked the permissions and my user is a member of the Project Collection Administrators and the Project Collection Administrators group has the 'Create new project' permission set to allow. The only thing I think it might be is that the user that I created during installation for the Sharepoint access and reports viewing does not have permission to write to the reports folder, however if I select "Do not configure a SharePoint site at this time" then I still get the error messages. I can't find the reports folder to check the permissions either. TFS is using an instance of SQL 2012 that was already on the machine when TFS was installed. Can anyone see what I'm doing wrong please?

    Read the article

  • Outlook 2007 unable to connect to exchange server

    - by mattwarren
    I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

    Read the article

  • Plesk Postfix SMTP 550 5.7.1 "Command rejected" for one external sender

    - by Mnebuerquo
    My server is rejecting emails from one external sender. I suspect this might be misconfiguration on the sending server, but I'm not sure from these error messages. The non-delivery report message the sender gets contains this text: #5.7.1 smtp;550 5.7.1 Command rejected> #SMTP# I also see this message in /var/messages at about the same time as the rejection message was sent, though I'm not sure if it's actually related: Nov 29 12:29:28 localhost postfix/smtpd[31829]: sql_sqlite3 plugin: no result found I'm using Plesk 10.4.4 Update #47, Centos 6.2, Postfix 2.8.4-11100615 on my mail server. This is only happening for one sender so far, but I found a Google result on experts-exchange.com which seemed to identify the same problem and with the same sending domain. This was posted back in June, and currently has no answers, so even if I was a paying customer it wouldn't be answered. (http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Q_27760746.html) The generating server is bigfish.com. What I need to determine is if this is a problem on my server or a problem with bigfish.com. Is there more information I can find in config files, logs, etc. to figure this out?

    Read the article

  • Transfer all 1&1 web and e-mail services to own Synology NAS using No-IP for DDNS

    - by Neo
    I have a domain x-treem.net. The registrar is DomainDiscover and I have a hosting package with 1&1 which includes web and e-mail. I also have an additional package with 1&1 - Microsoft Exchange which centralises all my e-mails, tasks, contacts, notes, etc. and I connect to it with my PC (Outlook) and my Android phone. I have just purchased a Synology NAS (DS213) and I can see I can run a web server (Web Station), e-mail server (Mail Server) on it amongst other things. I am behind a dynamic IP. So, I'm looking to get some clarification on what I must do to consolidate my services and make use of my NAS to do as much as possible and save third-party hosting costs. My registrar specifies nameservers as NS45.1AND1.CO.UK and NS46.1AND1.CO.UK. The MX record is mx00.1and1.co.uk and mx01.1and1.co.uk. I'm aware of the concept of DDNS and I am looking at using No-IP.com for this. This is where I need clarification. If I registered with the No-IP paid service and pointed my registrar to No-IP's nameservers, and used the DDNS support on my NAS (which supports No-IP), then any requests to x-treem.net would go to my NAS. Is that correct? Therefore, web requests would hit the web server on my NAS, and e-mails would hit the mail server on my NAS? So, given all of the above, I can then drop 1&1 completely and use my NAS for everything. I use MySQL, phpMyAdmin, phpBB on 1&1 all of which the Synology NAS appears to support in its available packages. As for Microsoft Exchange, Synology offers Zafara which appears to be a drop-in replacement for Exchange. Am I on the right track here, or is there anything I am missing?

    Read the article

  • How can I set IIS Application Pool recycle times without resorting to the ugly syntax of Add-WebConfiguration?

    - by ObligatoryMoniker
    I have been scripting the configuration of our IIS 7.5 instance and through bits and pieces of other peoples scripts I have come up with a syntax that I like: $WebAppPoolUserName = "domain\user" $WebAppPoolPassword = "password" $WebAppPoolNames = @("Test","Test2") ForEach ($WebAppPoolName in $WebAppPoolNames ) { $WebAppPool = New-WebAppPool -Name $WebAppPoolName $WebAppPool.processModel.identityType = "SpecificUser" $WebAppPool.processModel.username = $WebAppPoolUserName $WebAppPool.processModel.password = $WebAppPoolPassword $WebAppPool.managedPipelineMode = "Classic" $WebAppPool.managedRuntimeVersion = "v4.0" $WebAppPool | set-item } I have seen this done a number of different ways that are less terse and I like the way this syntax of setting object properties looks compared to something like what I see on TechNet: Set-ItemProperty 'IIS:\AppPools\DemoPool' -Name recycling.periodicRestart.requests -Value 100000 One thing I haven't been able to figure out though is how to setup recycle schedules using this syntax. This command sets ApplicationPoolDefaults but is ugly: add-webconfiguration system.applicationHost/applicationPools/applicationPoolDefaults/recycling/periodicRestart/schedule -value (New-TimeSpan -h 1 -m 30) I have done this in the past through appcmd using something like the following but I would really like to do all of this through powershell: %appcmd% set apppool "BusinessUserApps" /+recycling.periodicRestart.schedule.[value='01:00:00'] I have tried: $WebAppPool.recycling.periodicRestart.schedule = (New-TimeSpan -h 1 -m 30) This has the odd effect of turning the .schedule property into a timespan until I use $WebAppPool = get-item iis:\AppPools\AppPoolName to refresh the variable. There is also $WebappPool.recycling.periodicRestart.schedule.Collection but there is no add() function on the collection and I haven't found any other way to modify it. Does anyone know of a way I can set scheduled recycle times using syntax consistent with the code I have written above?

    Read the article

  • subneting .. is 192.168.0.1/24 different than 192.168.0.1/25

    - by SM
    So i am trying to understand subnetting. I understand that you can take 192.168.0.0/24 domain and break it up in 2 subnets. 192.168.0.0/25 and 192.168.0.128/25 .. so what if i need to create 2 more subnets inside both of those above subnets. What if i need to create 2 subnets, which have 2 more subnets inside them and each of those 2 subnets have 2 hosts. As per my calculation, this would be something like. top 2 subnets: 192.168.0.0/25 and 192.168.0.128/25 subnets of 192.168.0.0/25: 192.168.0.0/26 - 192.168.0.128/26 subnets of 192.168.0.128/25: 192.168.0.128/26 - 192.168.0.192/26 hosts of 192.168.0.0/25: 192.168.0.1/25 - 192.168.0.2/25 hosts of 192.168.0.128/25: 192.168.0.129/25 - 192.168.0.130/25 hosts of 192.168.0.0/26: 192.168.0.1/26 - 192.168.0.2/26 hosts of 192.168.0.128/26: 192.168.0.129/26 - 192.168.0.130/26 hosts of 192.168.0.128/26: 192.168.0.129/26 - 192.168.0.130/26 hosts of 192.168.0.192/26: 192.168.0.193/26 - 192.168.0.194/26 The above doesnt seem right, i am moving down like a tree, however the subnet mask and IPs are being repeated, i am just add 1 to /x and making the ips from there. Can anyone please tell me if this is correct The scenario i am trying to understand is similar to this, however i just want to add hosts on each level as well. http://www.ciscotrick.com/wp-content/uploads/2008/08/the_mathematical_relationship_between_network_block_sizes.jpg

    Read the article

  • SQL Server 2008 Cluster Installation - First network name always fails

    - by boflynn
    I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

    Read the article

  • Plesk SSL Certificate (Default cert when SSL enabled, CORRECT cert when SSL is disabled)

    - by hztetra
    I'm running Plesk 8.6.0: I have an SSL cert installed through Plesk's admin interface. But I have a bit of an issue: When I enabled SSL for the site, and selected my cert, then restart httpd, Plesk defaults to using my self-signed default certificate. Conversely, when I disable SSL support for the domain, all of a sudden Plesk is using my new SSL certificate. Unfortunately, when I try to view any folder on the site (mydomain.tld/folder) I'm simply met with a 404 (with files placed both in httpdocs and httpsdocs). I switch SSL support back on, and Plesk defaults back to the default self-signed cert and I can then view the folders that were not previously accessible. Any ideas? One further note: I tried following http://kb.parallels.com/en/939 . Once I tried to restart httpd with the edited ssl.conf file, I received an httpd could not start error. I restored the original ssl.conf file, and still received the could not start error. So as of now, I am running without an ssl.conf file. The following is the error I receive when I attempt to reintroduce ssl.conf: Starting httpd: [Mon Aug 23 15:45:40 2010] [warn] module ssl_module is already loaded, skipping (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 no listening sockets available, shutting down Unable to open logs

    Read the article

  • Squid 2.7 Stable 8 on Windows 2008

    - by Sadish
    Hi all, I have a Windows 2008 SP2 Active Directory Domain, which has clients of Vista, Win 2000 XP and Windows 7 as members. I installed Squid 2.7 Stable 8 on Windows 2008 SP2 trying to configure NTLM based authentication when surfing Internet. Basically have defined 2 groups for internet allow and deny based on authorization Internet access is allowed. But after trying for over 3 weeks, seems that the authentication does not happen. The browser keeps on asking for user name & password. I would like to know if there is any solution for this. I’m totally frustrated and unable to move forward. My configuration as below from the modifying the default squid.conf Line 292 auth_param ntlm program c:/squid/libexec/mswin_ntlm_auth.exe auth_param ntlm children 5 Line 626 acl localnet proxy_auth REQUIRED src 10.0.0.1/255 acl InetAllow external win_domain_group InternetUsers acl InetDeny external win_domain_group InternetDenyGroup http_access allow InetAllow http_access deny InetDeny Comment any "acl localnet src" Line 294 external_acl_type win_domain_group ttl=120 %LOGIN c:/squid/libexec/mswin_check_lm_group.exe –G My Windows 2008 server is running on 192.168.0.203 and clients are of subnet 10.0.0.x for which I need authentication. Pls help !!!

    Read the article

  • Nginx as a proxy to Tomcat

    - by user36812
    Pardon me, this is my first attempt at Nginx-Jetty instead of Apache-JK-Tomcat. I deployed myapp.war file to $JETTY_HOME/webapps/, and the app is accessible at the url: http://myIP:8080/myapp I did a default installation of Nginx, and the default Nginx page is accessible at myIP Then, I modified the default domain under /etc/nginx/sites-enabled to the following: server { listen 80; server_name mydomain.com; access_log /var/log/nginx/localhost.access.log; location / { #root /var/www/nginx-default; #index index.html index.htm; proxy_pass http://127.0.0.1:8080/myapp/; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /var/www/nginx-default; } } Now I get the index page of mypp (running in jetty) when I hit myIP, which is good. But all the links are malformed. eg. The link to css is mydomain.com/myapp/css/style.css while what it should have been is mydomain.com/css/style.css. It seems to be mapping mydomain.com to 127.0.0.1:8080 instead of 127.0.0.1:8080/myapp/ Any idea what am missing? Do I need to change anything on the Jetty side too?

    Read the article

  • powershell v2 remoting - How do you enable unecrypted traffic

    - by Peter Walke
    I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

    Read the article

  • DD-WRT: DNSMasq expand-hosts not working

    - by Craig Walker
    I have a Linksys router running DD-WRT (Firmware: DD-WRT v24-sp2 (09/08/09) mini). I have it successfully resolving the DNS names for my DHCP-assigned systems, but only when I fully-qualify those domains. This is despite using the "expand-hosts" DNSMasq additional option, which is supposed to activate this precise function. Here's my dnsmasq.conf: interface=br0 resolv-file=/tmp/resolv.dnsmasq domain=example.com dhcp-leasefile=/tmp/dnsmasq.leases dhcp-lease-max=51 dhcp-option=lan,3,10.77.0.5 dhcp-authoritative dhcp-range=lan,10.77.0.100,10.77.0.149,255.255.0.0,1440m dhcp-host=00:1A:A0:1D:82:5A,astatichostname,10.77.1.40,infinite expand-hosts (FYI: example.com and astatichostname are placeholders for the real-deal names I use. My network uses 10.77.0.0/16; my router is on 10.77.0.5.) Results: > nslookup astatichostname 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 ** server can't find astatichostname: NXDOMAIN > nslookup astatichostname.example.com 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 Name: astatichostname.example.com Address: 10.77.1.40 Is there something else that could be tripping up expand-host in DNSMasq?

    Read the article

  • SBS 2008 BPA Warnings After Migration From SBS 2003

    - by Nicholas Piasecki
    We just finished a we-know-just-enough-to-be-dangerous migration from SBS 2003 to SBS 2008, and things seem to have gone relatively smoothly. After running the SBS 2008 Best Practices Analyzer on the destination server, we've got three warning messages, and I can't tell if they're important or not. First, the easy one: SMTP Port (TCP 25 Status): The Edgetransport.exe process should listen on SMTP port 25, but that port is owned by the process. I don't think that this one is a big deal--e-mail is flowing through the SMTP connector. Since there are two spaces between "the" and "process," I'm assuming that for some reason BPA just couldn't figure out the owning process name and this is just some sloppy programming when displaying the message. (Indeed, on subsequent runs of the BPA this message goes away, and other times it comes back.) Now, two more scary sounding ones: No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs sub-domain in the forward lookup zone for Windows SBS 2008. and, similarly, No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs zone for Windows SBS 2008. Now for these two, everything appears to be functioning correctly--but I'm assuming this is a weird state as a result of the SBS 2003 to 2008 migration. Can anyone provide any pointers on how to fix it, or whether or not it can be safely ignored? Thanks!

    Read the article

  • System State Backups using NTbackup fail with error 0x800423f4 (relating to volume shadow copy)

    - by Paul Zimmerman
    We have a Windows Server 2003 R2 running Service Pack 2. It is a domain controller (Global Catalog) and our main internal DNS server. We run a System State backup of the machine to back up Active Directory information and save the backup to a different server. This server has a single drive (C:), and we do have Shadow Copies enabled for the volume (which are completing successfully). The System State Backup is now failing with the following listed in the backup logs: Volume shadow copy creation: Attempt 1. "Event Log Writer" has reported an error 0x800423f4. This is part of System State. The backup cannot continue. Error returned while creating the volume shadow copy:800423f4 Aborting Backup. The operation did not successfully complete. When doing a vssadmin list writers, we sometimes get the following reported for the Event Log Writer (other times it says that it is in the state of "[1] Stable" with "No error"): Writer name: 'Event Log Writer' Writer Id: {eee8c692-67ed-4250-8d86-390603070d00} Writer Instance Id: {c7194e96-868a-49e5-ba99-89b61977753c} State: [8] Failed Last error: Retryable error We have tried disabling the event log service via the registry, rebooting, deleting the event log files from the drive, then re-enabling the service via the registry and rebooting, but this didn't seem to solve the issue. We also get an error message when in the event viewer when trying to open the log for the "File Replication Service" of "Unable to complete the operation on 'File Replication Service'. The security descriptor structure is invalid." I have searched the error via Google and tried a number of different things, but nothing has seemed to help. Any suggestions on what we might try to get the Event Log Writer to behave would be greatly appreciated!

    Read the article

  • Windows 7 XP Mode disable time sync

    - by Oskar Duveborn
    So I've tried the trick from Virtual PC 2007, adding the following section to the vmc configuration file: <components> <host_time_sync> <enabled type="boolean">false</enabled> </host_time_sync> </components> Later someone suggested VPC doesn't want the components level so added this instead: <host_time_sync> <enabled type="boolean">false</enabled> <frequency type="integer">15</frequency> <threshold type="integer">10</threshold> </host_time_sync> When I start up XP Mode (Microsoft Virtual PC) it completely ignores any of these two configuration changes and if I change the clock it's instantly reset to the host time again. I've also obviously disabled the Windows Time service but as it's not joined to a domain or set up with a source it shouldn't be involved anyway. I need to test an application over a few midnight passes and thought the XP Mode machine would be perfect, so I didn't have to mess with my workstation clock... is there any way to get the VPC guest to not sync time with the host? This is easy in Hyper-V ;p

    Read the article

  • nokia cell phone not accepting IP from dnsmasq dhcp server

    - by samix
    Hello, I having problem connecting a NOkia cell phone to my home wifi network. The wifi network is provided by a wireless card in a machine running Debian Testing and 2.6.26-2-686 kernel. The cars is D-Link DWL-G520 working in ap mode and has WPA encryption enabled. The wireless network is provided by hostapd using madwifi driver. Windows and Mac machines work properly with this wifi network. When I try to get the Nokia phone to connect to the wifi network, I get these lines in my dnsmasq log (to see lines without wrapping, here is the pastebin link for convenience - http://pastebin.com/m466c8fd2): Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: disassociated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: associated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 RADIUS: starting accounting session 4AE664FA-00000036 Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: pairwise key handshake completed (WPA) Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: group key handshake completed (WPA) Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 Available DHCP range: 192.168.5.150 -- 192.168.5.199 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPDISCOVER(ath0) 0.0.0.0 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPOFFER(ath0) 192.168.5.21 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 12:hostname, 6:dns-server, 15:domain-name, Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 1:netmask, 3:router, 28:broadcast, 120:sip-server Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 tags: known, ath0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 next server: 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 1 option: 53:message-type 02 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 54:server-identifier 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 51:lease-time 00:00:46:50 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 58:T1 00:00:23:28 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 59:T2 00:00:3d:86 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 1:netmask 255.255.255.0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 28:broadcast 192.168.5.255 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 3:router 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 6:dns-server 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 8 option: 15:domain-name home.pvt Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 3 option: 12:hostname NokiaCellPhone Anybody know the problem might be? If I switch off dnsmasq dhcp queries logging, i.e. if I decrease the verbosity of the log, all I see are two lines of DHCPDISCOVER(ath0) and DHCPOFFER(ath0) repeatedly in the log with no acceptance by the cell phone. It appears as though the phone is not accepting the dhcp offer. However, if I give the phone a static IP address in its configuration, it works properly on the wifi network. So it appears as though the problem is dhcp related. Hints? Suggestions? Installed stuff: $ dpkg -l dnsmasq hostap* | grep ^i ii dnsmasq 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii dnsmasq-base 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii hostapd 1:0.6.9-3 user space IEEE 802.11 AP and IEEE 802.1X/WPA/ Thanks. PS: Here is the DHCP tcp dump for more information (with mac addresses changed): $ sudo dhcpdump -i ath0 -h ^11:22:33:44:55:66 TIME: 2009-10-30 12:15:32.916 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.923 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:38.919 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.920 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.921 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.945 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:48.952 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 ... and so on ...

    Read the article

  • Issues with ProxyPass and ProxyPassReverse when proxying to localhost and a different TCP port

    - by mbrownnyc
    I am attempting to use ProxyPass and ProxyPassReverse to proxy requests through Apache to another server instance that is bound to the localhost on a different TCP port that the Vhost exists (VHost is bound to :80, when the target is bound to :5000). However, I am repeatedly receiving HTTP 503 when accessing the Location. According to the ProxyPass documentation... <VirtualHost *:80> ServerName apacheserver.domain.local DocumentRoot /var/www/redmine/public ErrorLog logs/redmine_error <Directory /var/www/redmine/public> Allow from all Options -MultiViews Order allow,deny AllowOverride all </Directory> </VirtualHost> PassengerTempDir /tmp/passenger <Location /rhodecode> ProxyPass http://127.0.0.1:5000/rhodecode ProxyPassReverse http://127.0.0.1:5000/rhodecode SetEnvIf X-Url-Scheme https HTTPS=1 </Location> I have tested binding the alternate server to the interface IP address, and the same issue occurs. The server servicing request is an instance of python paste:httpserver, and it has been configured to use the /rhodecode suffix (as I saw this to be mentioned in other posts about ProxyPass). The documentation from the project itself, Rhodecode, reports to use the above. The issue is persistent if I target another server that is serving on a different port. Does ProxyPass allow proxying to a different TCP port? [update] I won't delete this, in case someone comes across the same issue. I had set an ErrorLog, and in that ErrorLog the following error was reported: [Wed Nov 09 11:36:35 2011] [error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:5000 (192.168.100.100) failed [Wed Nov 09 11:36:35 2011] [error] ap_proxy_connect_backend disabling worker for (192.168.100.100) After some more research, I attempted to set SELinux to permissive (echo 0 >/selinux/enforce), and try again. It turns out the SELinux boolean httpd_can_network_connect must be set to 1. For persistence on reboot: setsebool -P httpd_can_network_connect=1

    Read the article

  • Googlemail users can't email my email address

    - by Jack W-H
    Hi folks I have a GridServer account at MediaTemple. The address linked up to my MT account is [email protected]. My non-Google email address could email [email protected] just fine. But when my friend tried to email it from his gmail address, he got the following message: From: Mail Delivery Subsystem Date: Thu, Apr 15, 2010 at 12:02 PM Subject: Delivery Status Notification (Failure) To: [email protected] Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.231.205.139 with HTTP; Thu, 15 Apr 2010 12:02:26 -0700 (PDT) In-Reply-To: <[email protected] References: <[email protected] Date: Thu, 15 Apr 2010 12:02:26 -0700 Received: by 10.231.169.144 with SMTP id z16mr211585iby.25.1271358147047; Thu, 15 Apr 2010 12:02:27 -0700 (PDT) Message-ID: Subject: Re: Hi Friend From: My Friend To: "[email protected]" Content-Type: multipart/alternative; boundary=0016e6d26c5abcb2a704844b22bf Does this work. Does this work. Does this work? On Thu, Apr 15, 2010 at 11:30 AM, [email protected] wrote: Hi Friend. Just testing the email address I set up for My Site. Could you please reply so I can check if it's working OK? Cheers Jack I thought it was just a fluke, but exactly the same thing happens when I use MY Gmail address that I also have. Can anyone shed some light on the problem? Jack

    Read the article

  • How config nginx to serve flv video streaming with JWplayer

    - by Nisanio
    I need to serve flv files from one server, and show those videos on a web page located in another server, with JWPlayer. I already config nginx with the flv module, an put this on nginx.conf location ~ \.flv$ { flv; } The code I use in the jwplayer is <object id="player" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="328" height="200"> <param name="movie" value="player.swf" /> <param name="allowfullscreen" value="true" /> <param name="allowscriptaccess" value="always" /> <param name="flashvars" value="file=http://XX.XX.XX.XX/vid5.flv&image=preview2.jpg" /> <embed type="application/x-shockwave-flash" id="player2" name="player2" src="player.swf" width="630" height="385" allowscriptaccess="always" allowfullscreen="true" flashvars="file=http://XX.XX.XX.XX/vid5.flv&image=preview2.jpg" /> </object> Where XX.XX.XX.XX is the ip address of the server (we'll config an appropiate domain, but first i have to make the whole thing works :) ) The problem is that nothing happen. I don't know what to do next, all the articles on the internet only talks about how compile the flv module (already done) and add the nginx.conf lines. Any help would be greatly appreciate Thanks in advance

    Read the article

  • How to manage sub-domains on WinHost with IIS7 URL Rewrite 2.0?

    - by jrummell
    I'm trying out WinHost and I'm running into some issues with sub-domains. On WinHost, you can have multiple sub-domains per hosting account, but each sub-domain points to the root website. E.g. you can have www.example.com, sub1.example.com, and sub2.example.com but all of them display the content at http://www.example.com/. Other Hosts allow you to point sub-domains to a sub folder in your website. This would allow you to point sub1.example.com to /sub1, sub2.example.com to /sub2 and www.example.com to /. WinHost recommends using an asp/aspx page to redirect http://sub1.example.com to http://sub1.example.com/sub1, which points to /sub1. While that would work, I'd like to not have the subdomain in the url twice. So I tried using IIS7 URL Rewrite to point http://sub1.example.com to /sub1. Ben Powell describes this in detail on his blog. This is great, except Request.ApplicationPath is now /sub1/path/to/current/page.aspx, which breaks ASP.Net Themes (and probably other stuff too). What can I do to fix the ApplicationPath? Is there a better way to accomplish this?

    Read the article

  • change DNS but keep email server

    - by Oterox
    I currently have my client's website hosted in china and the domain is hosted in www.net.cn I've purchased an inmotionhosting plan and i want to move the website there. For having the website working i just need to change the DNS nameservers but i want to keep the email in the client's old server, is this possible? Currently i have this DNS: MX mxn.mxhichina.com. 5 MX mxw.mxhichina.com. 10 CNAME pop3 pop3.mxhichina.com. -- CNAME smtp smtp.mxhichina.com. -- CNAME mail mail.mxhichina.com. -- CNAME m m.mxhichina.com. -- TXT v=spf1 include:spf.m... -- A @ 223.4.215.96 -- A www 223.4.215.96 -- and in inmotionhosting i have this: example.com. 14400 IN A 216.194.168.46 localhost.example.com. 14400 IN A 127.0.0.1 mail.example.com. 14400 IN CNAME example.com www.example.com. 14400 IN CNAME example.com webmail.example.com. 14400 IN A 216.194.168.46 What do i have to change to have the website working on the new server but keeping the email server where it is right now?

    Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >