Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 464/2753 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

  • router only assigns small number of IPs

    - by Liam Coates
    Been having a problem with my router for a while now, might just be because it is really old but here's the problem: If a lot of computers are connected to my home network someone will get disconnected. They are assigned IPs and it seems like at a certain point (and I don't know how many) you either get assigned the same IP as someone else or something else is happening and you get disconnected - until i soft reset it and it works again which takes 30 secs. I'd say my tablet, my PC, my sisters iPad, 2 laptops and a netbook is the most that can be connected at one time so that is 6 but that should be fine. The only way I know this is the problem is because I turned on my tablet and I was online on my PC, got disconnected but my tablet was still connected, this is just after i turned the tablet on so I know my router is having difficulty with IPs, it is like it assigned the same IP to the tablet which then clashed with my desktop and knocked me off. I see that sometimes the following solves it as well so I wrote a batch file with a menu to execute these commands as I have to do it so often. ipconfig /release ipconfig /flushdns ipconfig /renew Any ideas? Or shall I just get a new router as this one is old and maybe can't handle giving out that many IPs? Cheers!

    Read the article

  • PHP memory_limit local value does not match php.ini value

    - by Buttle Butkus
    CentOS system. Summary: changed memory_limit in master and local php.ini and yet no change in the local value for a particular virtual host. Trying to improve performance, I set the memory_limit to 1024M in /etc/php.ini phpinfo() shows Master and Local values for other virtual hosts on the server as 1024M. Changing the value in /etc/php.ini changes all values, except one. One site is stuck with a local value of 256M. I thought I found the problem: there is a php.ini file (which I didn't know about) in that site's root, and it had memory_limit = 256M I changed it to 1024M. Problem solved? No. And now I don't know where to look. Obviously, I've restarted apache (/etc/init.d/httpd restart), and that usually does the trick. I also turned off APC cache, though I don't think it would cache ini files. And finally, I tried adding this to the virtual host in httpd.conf: php_value memory_limit 536870912 (yes, that would be 5 GB) And that had no effect whatsoever. What else could be the problem? Thanks.

    Read the article

  • Microsoft Application Request Routing with Windows Authentication

    - by theplatz
    I'm running into a problem trying to get Windows Authentication working in an environment that uses Microsoft Application Request Routing and was hoping someone might be able to help. The problem I'm running into is that only some requests are authenticated, while others fail with 401 errors. I have followed the Special Case of Running IIS 7.0 in a Web Farm instructions found at http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx to no avail. My current server setup looks like the following: ARR Two servers set up with IIS shared configuration using IIS 7.5 on Windows 2008 R2 Anonymous authentication turned on for the Default Web Site Web Farm Two servers running IIS 7.5 on Windows 2008 R2 Three web sites set up using port binding to differentiate between virtual hosts. Ports being used are 8000, 8001, and 8002 Application pools for Windows Authentication all use a common domain account SPN added to domain account for http/<virthalhost-name>:<port-number> and http/<virtualhost-name>.<fully-qualified-domain>:<port-number> The IIS logs show the following when authentication is working/failing. If I understand correctly, all requests should show DOMAIN\User_Name: 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/stylesheets/techweb.landing.css - 8002 DOMAIN\User_Name ARR-HOST-1-IP-ADDRESS 200 0 0 62 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-left.gif - 8002 DOMAIN\User_Name ARR-HOST-IP-ADDRESS 200 0 0 31 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/application-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 3221225581 15 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/building.gif - 8002 DOMAIN\User_Name ARR-HOST-2-IP-ADDRESS 200 0 0 218 Does anyone know what might cause this problem and how I can resolve it?

    Read the article

  • Clean URLs mod_rewrite & wildcard subdomains

    - by Søren Zet
    I got this url http://domain.com/blogs/directory-param with this rule RewriteBase /blogs/directory/ RewriteRule ^/blogs/directory-([A-Za-z0-9-]+)$ /blogs/directory/index.php?cat=$1 [L] so I get /blogs/directory/index.php?cat=param now my problem is the following: I use wildcards subdomains so every *.domain.com is mapped to domain.com/blogs/ for example soeren.domain.com is mapped to domain.com/blogs and so on... My problem now is I want a rule for soeren.domain.com/directory-param which points to domain.com/blogs/directory?index.php?cat=param Do you have any ideas?

    Read the article

  • jqGrid error when setting width using new API

    - by Arturo Molina
    I'm using the new API to set the width of my jqGrid like this: $('#grid').jqGrid('setGridWidth', $(window).width() * 0.98); The problem is that in IE7 I'm getting this error: 'p.cellLayout' is null or not an object This only happens in IE7 (IE8, Firefox and Chrome work fine). Has anybody else encounter this problem and fixed it?

    Read the article

  • error to send SMS

    - by deni
    i have a problem with that code.. i got a error when i execute CommSetting.comm.SendMessage(pdu); the error is Phone reports generic communication error or syntax error can u tell me how to solve my problem?? thx i develop with c#, VS 2008

    Read the article

  • TV won't go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Asynchronous vs Synchronous vs Threading in an iPhone App

    - by Coocoo4Cocoa
    I'm in the design stage for an app which will utilize a REST web service and sort of have a dilemma in as far as using asynchronous vs synchronous vs threading. Here's the scenario. Say you have three options to drill down into, each one having its own REST-based resource. I can either lazily load each one with a synchronous request, but that'll block the UI and prevent the user from hitting a back navigation button while data is retrieved. This case applies almost anywhere except for when your application requires a login screen. I can't see any reason to use synchronous HTTP requests vs asynchronous because of that reason alone. The only time it makes sense is to have a worker thread make your synchronous request, and notify the main thread when the request is done. This will prevent the block. The question then is bench marking your code and seeing which has more overhead, a threaded synchronous request or an asynchronous request. The problem with asynchronous requests is you need to either setup a smart notification or delegate system as you can have multiple requests for multiple resources happening at any given time. The other problem with them is if I have a class, say a singleton which is handling all of my data, I can't use asynchronous requests in a getter method. Meaning the following won't go: - (NSArray *)users { if(users == nil) users = do_async_request // NO GOOD return users; } whereas the following: - (NSArray *)users { if(users == nil) users == do_sync_request // OK. return users; } You also might have priority. What I mean by priority is if you look at Apple's Mail application on the iPhone, you'll notice they first suck down your entire POP/IMAP tree before making a second request to retrieve the first 2 lines (the default) of your message. I suppose my question to you experts is this. When are you using asynchronous, synchronous, threads -- and when are you using either async/sync in a thread? What kind of delegation system do you have setup to know what to do when a async request completes? Are you prioritizing your async requests? There's a gamut of solutions to this all too common problem. It's simple to hack something out. The problem is, I don't want to hack and I want to have something that's simple and easy to maintain.

    Read the article

  • UTC time stamp on Windows

    - by Arman
    I have a buffer with the UTC time stamp in C, I broadcast that buffer after every ten seconds. The problem is that the time difference between two packets is not consistent. After 5 to 10 iterations the time difference becomes 9, 11 and then again 10. Kindly help me to sort out this problem. I am using <time.h> for UTC time.

    Read the article

  • Why does the screen resolution of 1440x900 suddenly disappear from Intel GMA Control Panel?

    - by GeneQ
    I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2. I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've goggled this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

    Read the article

  • How to execute a program using MSBuild?

    - by John
    Hello, My main problem is the lack of documentation for the Post/Pre-Build in Delphi 2009.The goal is to execute another program on the Pre-build event of my project. Example I tried this,but it fails: Exec "E:\somepath\some.exe". Where is the problem,how do I execute another executable on Pre-Build using MSBuild?

    Read the article

  • Displaying issue in Webview

    - by milanjansari
    Hello, i did save png and pdf file in Sqlite successfully. but when i retrive png and pdf data from sqlite and trying to display in Webview its create a problem. for exp NSData *data = [[NSData alloc] initWithBytes:sqlite3_column_blob(selectstmt, 1) length:sqlite3_column_bytes(selectstmt, 3)]; [webview loadData:data MIMEType:@"image/png" textEncodingName:@"UTF-8" baseURL:[NSURL URLWithString:@""]]; but problem is there only see image tag not display image. any solution of below of the code. Thanks you

    Read the article

  • Microsoft SQL Server Management Studio causing system freeze

    - by CRoshanLG
    I'm experiencing very slow response from MSSMS and it causes other applications to slow down. Specially Skype crashes after few seconds from opening MSSMS, showing an error called "Disk I/O Error". I'm regularly using few applications (Sublime text, MS Word, Firefox, Outlook, Skype and one or two other apps) simultaneously. The system works fine when MSSMS is not in use! But as soon as MSSMS is opened, all the apps start to freeze (MSSMS also responds very slow). This problem has been there for about a week now (I haven't installed any apps or haven't made any changes to the system during that time). -- System Specifications -- Processor: Core i3 (3.1 GHz) RAM: 4 GB OS: Windows 7 Professional (64 bit) Free space in C drive: ~ 100 GB MS SQL Server 2008 R2 Microsoft SQL Server Management Studio version - 10.50.1600.1 I've tried to find a reason for this but there are no helpful information in the web! There are some solutions suggested (in forums and in Skype Support pages) for the Skypes' "Disk I/O Error", all of which I tried but does not solve the problem. Has anyone faced the same senario? (and hopefully) knows a solution? Systems Log I don't have much knowledge in interpreting the System Log, but I think the Critical and Warnings are not helpful. But there are lots of Error logs which might be useful. In source Kernal-General there are few similar errors saying "An I/O operation initiated by the Registry failed unrecoverably.The Registry could not flush hive (file): <some file>" In source atapi also there are few similar errors -- "The driver detected a controller error on \Device\Ide\IdePort0." (all errors has occurred in 'IdePort0') In Application Error, there are several errors logged, and following is the latest one. Both the Errors which has occurred today is similar (to this one). As it is from Ssms.exe, I guess this is relevant to the cause of problem. But as I said above I can't understand what it means!

    Read the article

  • How do I dynamically change ubercart's default messages from my module

    - by DKinzer
    There are some products for which I would like to have a special checkout complete message that would differ from the default. I know that I could probably do this by changing the default redirect page to something else. [And I'm not sure if that would introduce another problem] However, I would like to know if there is a standard/better way of approaching this problem. Thanks!, D

    Read the article

  • WEIRD netstat behavior on Windows XP re: www.partypoker.com

    - by tbone
    I really don't know if this is the right place to ask this, but I would really appreciate if someone that is more savvy on Windows XP (Professional) could help me out. For background, I am a 10+ years programmer, so I'm not a total idiot, but I am far from an expert on TCP/IP, etc, and this has me totally confused. When I do a netstat (on Windows XP) I seem to always get a huge amount of www.partypoker.com connections and I can't figure out where they are coming from. A netstat -o shows me that some are coming from PID xxx, which is firefox, but if I kill it, the connections still remain. Some are coming from PID 0, which makes no sense to me. SECOND PROBLEM: One would think you could edit the C:\WINDOWS\system32\drivers\etc\hosts file to block this, but it seems like my machine is ignoring the hosts file! (I have tried with the DNS client service both enabled and disabled, same result). So I just rebooted, killed all my normal programs, and I can't seem to reproduce the problem. If I was a paranoid person, I would think there was some sort of an intelligent trojan running. I am running Windows XP Pro, Kaspersky Antivirus, ccCleaner, and am fully up to date on Windows Update. What gives???? So, I guess my questions are: 1. Is anyone else seeing these wird connections to partypoker.com? 2. Why isn't my hosts filter working? 3. Is there some utility I can run to find out whats happening? I've tried autoruns.exe from sysinternals but don't see anything interesting. Am I the only one with this problem? If there are any additional things you need me to run, let me know.

    Read the article

  • Computer resetting semi-randomly

    - by Peter
    Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

    Read the article

  • WPF: Image cilck event

    - by user279244
    I can find only MouseDown Event and MouseUp Event on a image in WPF. This causes some problem if I do MouseDown on some Image, Move the mouse and MouseUp event happens on some other image. Is there any other event that I can use to solve this problem. like MouseClick Event for Button element.

    Read the article

  • Lazy loading the addthis script? (or lazy loading external js content dependent on already fired eve

    - by Keith Bentrup
    I want to have the addthis widget available for my users, but I want to lazy load it so that my page loads as quickly as possible. However, after trying it via a script tag and then via my lazy loading method, it appears to only work via the script tag. In the obfuscated code, I see something that looks like it's dependent on the DOMContentLoaded event (at least for firefox). Since the DOMContentLoaded event has already fired, the widget doesn't render properly. What to do? I could just use a script tag (slower)... or could I fire (in a cross browser way) the DOMContentLoaded (or equivalent) event? I have a feeling this may not be possible b/c I believe that (like jQuery) there are multiple tests of the content ready event, and so multiple simulated events would have to occur. Nonetheless, this is an interesting problem b/c I have seen a couple widgets now assume that you are including their stuff via static script tags. It would be nice if they wrote code that was more useful to developers concerned about speed, but until then, is there a work around?? And/or are any of my assumptions wrong? Edit: Because the 1st answer to the question seemed to miss the point of my problem, I wanted to clarify the situation. This is about a specific problem. I'm not looking for yet another lazy load script or check if some dependencies are loaded script. Specifically this problem deals with external widgets that you do not have control over and may or may not be obfuscated delaying the load of the external widgets until they are needed or at least, til substantially after everything else has been loaded including other deferred elements b/c of the how the widget was written, precludes existing, typical lazy loading paradigms While it's esoteric, I have seen it happen with a couple widgets - where the widget developers assume that you're just willing to throw in another script tag at the bottom of the page. I'm looking to save those 500-1000 ms** though as numerous studies by yahoo, google, and amazon show it to be important to your user's experience. **My testing with hammerhead and personal experience indicates that this will be my savings in this case.

    Read the article

  • RDP or SSH connection trough Windows 2008 server VPN hang after a while

    - by xt4fs
    I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

    Read the article

  • IPSec VPN using ZyWALL IPSec VPN Client: unable to connect from some providers

    - by Reshi
    I'm trying to configure an IPSec VPN to one company from my home. The company has SANET internet service provider. I was able to create a VPN connection from another company that has the same internet service provider. The problem begins when I'm trying to connect from another ISP like Orange or Telekom. Here is the log from ZyWall: 20120816 10:06:18:359 Default (SA Gateway-P1) SEND phase 1 Main Mode [SA] [VID] [VID] [VID] [VID] [VID] 20120816 10:06:18:375 Default (SA Gateway-P1) RECV phase 1 Main Mode [SA] [VID] [VID] [VID] [VID] [VID] [VID] [VID] [VID] 20120816 10:06:18:390 Default (SA Gateway-P1) SEND phase 1 Main Mode [KEY_EXCH] [NONCE] [NAT_D] [NAT_D] 20120816 10:06:18:718 Default (SA Gateway-P1) RECV phase 1 Main Mode [KEY_EXCH] [NONCE] [NAT_D] [NAT_D] 20120816 10:06:18:734 Default (SA Gateway-P1) SEND phase 1 Main Mode [HASH] [ID] 20120816 10:06:18:750 Default (SA Gateway-P1) RECV phase 1 Main Mode [HASH] [ID] 20120816 10:06:18:750 Default phase 1 done: initiator id [email protected], responder id 111.112.113.114 20120816 10:06:18:765 Default (SA Gateway-Tunnel-P2) SEND phase 2 Quick Mode [HASH] [SA] [KEY_EXCH] [NONCE] [ID] [ID] 20120816 10:06:18:953 Default (SA Gateway-Tunnel-P2) RECV phase 2 Quick Mode [HASH] [SA] [KEY_EXCH] [NONCE] [ID] [ID] 20120816 10:06:18:953 Default (SA Gateway-Tunnel-P2) SEND phase 2 Quick Mode [HASH] 20120816 10:06:48:968 Default (SA Gateway-P1) SEND Informational [HASH] [NOTIFY] type DPD_R_U_THERE 20120816 10:06:48:984 Default (SA Gateway-P1) RECV Informational [HASH] [NOTIFY] type DPD_R_U_THERE_ACK ZyWall informs me that the tunnel was opened. But I can't ping or access any computer in the network. My configuration at home: ISP: Orange Optical connection Terminal: GPON OPTICAL NETWORK TERMINAL G-25E Router: TPLink TL-WR941N --> SPI Firewall Enabled --> VPN - IPSEC Passthrough Enabled I was wondering if the problem could not be on ISP side (that he blocks somehow this connection because in SANET ISP it worked fine) or even in my terminal or router. What could I check? Where could be the problem ?

    Read the article

  • how to displaying pivot in matrix reporting service?

    - by Chandradyani
    Dear All, I have problem relating to pivot query and matrix reporting. I don't know how to display it on matrix reporting service so it will dynamic column. Can any body help me to show how to configure the matrix table? or could you give the link where can I find the answer of my problem? I'm newbie in reporting service.

    Read the article

  • Sending email with exim and extrnal sender address

    - by Tronic
    hi. i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you!

    Read the article

  • Java: repetition, overuse -- ?

    - by HH
    I try to be as minimalist as possible. Repetition is a problem. I hate it. When is it really a problem? what is static-overuse? what is field-method overuse? what is class-overuse? are there more types of overuse? Problem A: when it is too much to use of static? private static class Data { private static String fileContent; private static SizeSequence lineMap; private static File fileThing; private static char type; private static boolean binary; private static String name; private static String path; } private static class Print { //<1st LINE, LEFT_SIDE, 2nd LINE, RIGHT_SIDE> private Integer[] printPositions=new Integer[4]; private static String fingerPrint; private static String formatPrint; } Problem B: when it is too much to get field data with private methods? public Stack<Integer> getPositions(){return positions;} public Integer[] getPrintPositions(){return printPositions;} private Stack<String> getPrintViews(){return printViews;} private Stack<String> getPrintViewsPerFile(){return printViewsPerFile;} public String getPrintView(){return printView;} public String getFingerPrint(){return fingerPrint;} public String getFormatPrint(){return formatPrint;} public String getFileContent(){return fileContent;} public SizeSequence getLineMap(){return lineMap;} public File getFile(){return fileThing;} public boolean getBinary(){return binary;} public char getType(){return type;} public String getPath(){return path;} public FileObject getData(){return fObj;} public String getSearchTerm(){return searchTerm;} Related interface overuse

    Read the article

  • 2 IE8 behave differently

    - by portoalet
    Hi, I am having a problem where 2 IE8 (with the same version number 8.0.6001.18702) behave differently in processing a webpage. The misbehaving one is of course used by the client :) , and I just cannot reproduce it on my machine or on our test machine. How can I narrow down what is causing this problem? Thanks

    Read the article

  • Troubleshoot dropped wireless connections

    - by Jack
    I was recently hired in the IT department of a small company (~180 users) and one of the issues that people have been complaining about is having their wi-fi connections drop during meetings. The company is using an HP ProCurve Wireless LAN with 10 APs and a controller unit located in the server room. I don't have any experience troubleshooting WLAN in a multi-AP environment, so I'm trying to at least gather information using free or cheap tools. I did a basic site survey using the free version of Ekahau HeatMapper and discovered the following in one of the conference rooms that has been a problem. The program picked up three access points (plus a bunch of others with much lower signals that were out of range): AP 1: SSID: "Unknown SSID" - Signal strength: -48 dBm - -40 dBm. Channel: 2 AP 2: SSID "CompanyMain" - Signal strength: -35 dBm or greater. Channel: 2. Security: WEP (This is the main SSID for the company's WLAN.) AP 3: SSID: "CompanyGuest" - Signal strength: -40 dBm - -35 dBm. Channel: 2. Security: WPA2 (This SSID is the company's "guest" WLAN, which was setup to allow Internet access, but prevent network access.) Is there anything that you see that is clearly a problem from the above? I'm assuming that the unknown SSID might be a big problem, and that it is an AP from a neighboring office that is causing interference. Does that seem likely? Also, regarding channel, should we try changing the channels of our APs to avoid interference with that unknown SSID? (Since everything seems to be on Channel 2?) Should our APs be on different channels? In other words, should the CompanyMain and CompanyGuest APs be on different channels? Finally, any recommendations for free/cheap tools to help me figure this out, and/or a good methodology to follow? Thanks in advance for any help. Jack

    Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >