Search Results

Search found 63197 results on 2528 pages for 'every answer gets a point'.

Page 465/2528 | < Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >

• Solaris Fibre Channel target - Configure QLogic QLA2340

  - by growse

  I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA. For some reason, the qlc and qlt drivers don't support the QLA2340, so I'm using the qla2300 driver from QLogic's website. I've also got the scli utility installed for configuration. The HBA is detected by the system. That said, it's not clear how I get from this point to a point where I have a ZFS volume being exposed as an FC target. I was originally following this guide (http://www.youtube.com/watch?v=yzEBd3l7Qn4) but it seems that without the qlc/qlt drivers, Sun's configuration tools won't work. Does that also imply that COMSTAR also won't work? What's the best way to expose an FC target with this setup? Most of the options I'm seeing in scli complain that the port state is LinkDown (it is, I've not plugged anything in yet). Do I have to have my FC client plugged up and working before I can configure the target? Apologies for the slight vagueness of the question, but I'm not overly familiar with the terminology.

  Read the article

• Meeting attendees missing for organizer after 3rd party accepts meeting

  - by jonath2002

  Outlook 2007, Exchange 2003 EE Meeting Organizer created a meeting. (Some attendees part of domain some not) Organizer updated meeting with additional attendees and changed time. (Some attendees part of domain some not) One of the attendees forwarded meeting to someone not on attendee list , that person (not in domain) accepted meeting. Organizer only sees himself and 3rd party person in Attendee list. Troubleshooting: Attendees that have accepted meeting show all attendees in list (excluding 3rd party) Attendee re-accepted invite and gets added to organizer list

  Read the article

• How to scale bandwidth of a startup website?

  - by EmpireJones

  I would like to host a website using my home internet connection, with multiple computers acting as nodes of web server, db, apache cassandra clusters, and memcached clusters. When this website gets to the point where I outgrow my slow home internet connection, what is the easiest/best way to scale the internet bandwidth?

  Read the article

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• What are some fast methods for navigating to frequently used folders in Windows 7?

  - by fostandy

  (This is a followup question from my previous question.) In windows XP I used to be able to quickly navigate to frequently used folders by making use of the 'Favorites' menu item and the hotkey behaviour. In certain conditions it could be set up so that getting to a particular folder was as easy as alt-a x (and without a file explorer window open it was as fast as win-e alt-a x). I am struggling to get anywhere near this speed in Windows 7 and would like to solicit advice from others regarding fast folder navigation to see if I am missing any methods. My current way to navigate quickly is basically move hand to mouse move cursor to navigation pane/pain. scroll all the way to the top (because normally I the panel is focused on whatever deep directory structure I am already in). sift through my 50+ favorites to get the one I want, or click a link to a folder that contains further links in some sort of 'pseudo-tree' functionality. select it. This is slower than my previous method by upwards of an order of magnitude. There are a couple of things I've contemplated: add expandable folders, not just direct links, to the favorites menu. add expandable folders, not just direct links, to the start menu. add links of my favorite folders to a submenu of the start menu so that they come up when I search them. They do but this still rather cumbersome started using 7stacks - url here (I cannot link the url directly due to lack of reputation but http://www.alastria.com/index.php?p=software-7s). This is about the closest I've gotten to some sort of compact, customizeable, easy to access, tree based navigation structure. How do you power users quickly navigate to your favorite folders? Are there keyboard shortcuts I am missing? Can someone recommend other apps or addon or extensions that can achieve this sort of functionality? The Current solution (thanks to the answers below) I am going to use is a combination of Autohotkey and 7stacks - autohotkey to launch 7stacks, 7stacks with the 'menu' stack type for fast, key-enabled navigation to folders organised in a tree structure. This solves about 90% of the issue, the only issues are (note that these are really minor, I am really splitting hairs more than anything here) Can't use this for existing folder navigation (ie already have a explorer window open, want to go to another directory) A bit more cumbersome to add/remove entries to compared to xp favorites. A little slower than xp favorites. Whatever. I'm happy. Thanks guys. I think the answer is a split to John T and Kelbizzle - I've elected to give the answer to John T and +1 to Kelbizzle as I had already mentioned 7stacks.

  Read the article

• How do I give a user permisson to view scheduled task history on Server 2008?

  - by pplrppl

  I've set up a scheduled task on Server 2008 and want to run it as a user other than the local administrator. So I choose a domain account created specifically for this task and once I've closed the scheduled task and entered a valid password I want to run it and look a the history tab for this task. On the history tab I see: The user account does not have permission to view task history on this computer. What permission must I grant to allow this user to view history and/or how can I view the history as a local admin/domain admin instead of the user the job will run under? Steps to hopefully reproduce: I'm starting from the "Server Manager" - Configuration - Task Scheduler - Task Scheduler Library. IN the top middle pane I have tasks that have been running for several months as the local administrator. In the process of troubleshooting another issue I changed the task to run as Domain\ABCuser. Later in the process of troubleshooting I tried unchecking "run with highest privileges". I have since changed the job back to SERVERNAME\Administrator but the history tab still showed the permissions message. I may have had multiple Server Manager windows open. After Closing the Server Manager and being sure no other management consoles were open I was able to reopen the Server Manager and see the History tab without error. At this point the task works properly but should I ever need to run a task as a task specific account I'd like to know how to make the history viewable. It may be something as simple as closing all Server Manger windows to allow cached permissions to be refreshed the next time you open the Manager but at this point I don't know exactly what the solution is.

  Read the article

• Java heap keeps on shrinking! What is happening in this graph of heap size?

  - by chillitom

  Hi Guys, This is a screen shot of a JVM (win64, 6u17) running ActiveMQ, after every garbage collection the heap size is reducing. As the heap size reduces garbage collection gets more frequent and the heap reduces more quickly. Eventually the VM locks up as it's spending all it's time in GC. What is happening!!? How can I avoid this? http://imagebin.org/92614

  Read the article

• "tasksel: aptitude failed (100)" installing LAMP on Ubuntu (vagrant)

  - by John Mee

  vagrant@precise64:~$ sudo tasksel install lamp-server tasksel: aptitude failed (100) I'm hoping to get a LAMP server from a clean install of ubuntu. All the googles suggest tasksel, which going into a pretty ascii gui, downloads stuff, then dies with this message. I'm guessing I should try doing it via apt-get of the individual packages but seems a fair chance somebody else is going to search for this error message and want the right answer.

  Read the article

• what kind of RAID should I choose when planning to host a vedio stream application? [duplicate]

  - by facebook-100005613813158

  This question already has an answer here: What are the different widely used RAID levels and when should I consider them? 2 answers Which RAID level should you recommend for a company that plans to hosts a video streaming application?we get 4 candidate ,RAID1 , RAID3,RAID5 AND RAID6. Which one is the best? In my opinion ,a video streaming application doesn't have a very strict demand for data correctness, so , just RAID1 is ok?But on the other hand , RAID1 seems very capacty-consuming?

  Read the article

• Dynamic virtual host configuration in Apache

  - by Kostas Andrianopoulos

  I want to make a virtual host in Apache with dynamic configuration for my websites. For example something like this would be perfect. <VirtualHost *:80> AssignUserId $domain webspaces ServerName $subdomain.$domain.$tld ServerAdmin admin@$domain.$tld DocumentRoot "/home/webspaces/$domain.$tld/subdomains/$subdomain" <Directory "/home/webspaces/$domain.$tld/subdomains/$subdomain"> .... </Directory> php_admin_value open_basedir "/tmp/:/usr/share/pear/:/home/webspaces/$domain.$tld/subdomains/$subdomain" </VirtualHost> $subdomain, $domain, $tld would be extracted from the HTTP_HOST variable using regex at request time. No more loads of configuration, no more apache reloading every x minutes, no more stupid logic. Notice that I use mpm-itk (AssignUserId directive) so each virtual host runs as a different user. I do not intend to change this part. Since now I have tried: - mod_vhost_alias but this allows dynamic configuration of only the document root. - mod_macro but this still requires the arguments of the vhost to be declared explicitly for each vhost. - I have read about mod_vhs and other modules which store configuration in a SQL or LDAP server which is not acceptable as there is no need for configuration! Those 3 necessary arguments can be generated at runtime. - I have seen some Perl suggestions like this, but as the author states $s->add_config would add a directive after every request, thus leading to a memory leak, and $r->add_config seems not to be a feasible solution.

  Read the article

• Acer M5 481pt 6488 use of touchscreen stylus

  - by Scott Decker

  I am wanting to do some basic drawing with Adobe Illustrator using a touchscreen stylus. I was looking at an answer to a different question, and Ben Richards had made mention that laptops that support digitizer (possibly wrong terminology) technology is superior. I tried a quick search to see if my model supports that, but I couldn't find anything. How can I find out if my laptop supports this technology? Thanks a bunch!

  Read the article

• Linux Mint reset display resolution from console

  - by wullxz

  I have a Linux Mint 13 Xfce in a VMware Workstation 8 VM and set the resolution from 800x600 to 1280x768 and now I get permanently logged out when I try to login. I knew how to get back to my old resolution back in the xorg.conf days but Linux Mint now uses xrandr which won't display any displays when running # xrandr because X is not running (of course not - I can't login over GUI). I know that there are configuration files in /etc/X11/Xsession.d/ because I configured a debian based thinclient's resolution in a file called /etc/X11/Xsession.d/91configure_display but that file doesn't exist in my Linux Mint VM. So, how do I reset my X screen resolution from console? Edit: I forgot to tell you that I can't change resolution in console: # xrandr -s 800x600 Can't open display This message appears every time I use xrandr or xrandr -s *resolution* Update: I tried what bWowk suggested: # export DISPLAY=:0.0 # xrandr -s 800x600 No protocol specified No protocol specified Can't open display :0.0 So, that doesn't work either. Isn't there a configuration file that is executed every time X starts? X is running btw - ps aux | grep X shows one process /usr/bin/X running.

  Read the article

• Trying to get to the command prompt through recovery disk

  - by cody

  I'm trying to reach the command prompt through a vista recovery disk I have, and it boots from the disk and gets to the point where it asks which installation I want to repair and then says the disk is not compatible with my version of windows. I have a dual boot setup with Vista and server 2008 R2. Is there another was to run check disk? I can't boot in safemode or normally, I suspect a driver (atipcie) is the problem

  Read the article

• Which ISO burning software do you recommend?

  - by Mark Pim

  I'm looking for people's opinion on the best, free and most reliable ISO burning software out there. Any OS, but state which one(s) in your answer.

  Read the article

• Configure POP3 Connector for SBS 2008 (Exchange 2007)

  - by MadBoy

  I have a client which has all his mail on server outside of his company. Right now his exchange server (on SBS 2008 is configured using POP3 connector but problem is mail gets deleted from server when downloaded by connector. Is there a way to make pop3 connector leave emails on server (external one) and download them as well for use within Exchange. Client wants to "feel" exchange before making the move totally so he would like to play with it for longer while without loosing mails he has on his server.

  Read the article

• Is it possible do have a bigger resolution in a 22" FullHD VGA screen?

  - by Igoru

  I'm using a 13" laptop with FullHD (1920x1080) resolution and an external screen with FullHD resolution too, but of 22". It's quite strange to have a much bigger screen with the same "area space", and I was thinking about manually adding a custom resolution to linux config. I know how to do that, but I'm not sure about a good resolution to setup. Any ideas? Any "don't do that please" answer? If yes, why?

  Read the article

• How does IPv6 subnetting work and how does it differ from IPv4 subnetting?

  - by Michael Hampton

  This is a Canonical Question about IPv6 Subnetting. Related: How does IPv4 Subnetting Work? I know a lot about IPv4 Subnetting, and as I prepare to (deploy|work on) an IPv6 network I need to know how much of this knowledge is transferable and what I still need to learn. IPv6 seems at first glance to be much more complex than IPv4. So I would like to know: IPv6 is 128 bits, so why is /64 the smallest recommended subnet for hosts? Related to this: Why is it recommended to use /127 for point to point links between routers, and why was it recommended against in the past? Should I change existing router links to use /127? Why would virtual machines be provisioned with subnets smaller than /64? Are there other situations in which I would use a subnet smaller than /64? Can I map directly from IPv4 subnets to IPv6 subnets? My interfaces have several IPv6 addresses. Must the subnet be the same for all of them? Why do I sometimes see a % rather than a / in an IPv6 address and what does it mean? Am I wasting too many subnets? Aren't we just going to run out again? In what other major ways is IPv6 subnetting different from IPv4 subnetting?

  Read the article

• Please wait for User Profile Service... on WIndows 7 takes around 1-2 minutes to process

  - by Chris

  When loggging into our domain, after entering account credentials the log in process takes around 1-2 minutes before it gets past the User Profile Service, the rest of the process takes 2-3 secs. This effects all machines running Windows 7 Enteprise 32-bit and is on fairly high spec laptops (SSD drives, i5 2.93Ghz CPU, 4GB memory). Is there any way to speed this up or is this time delay acceptable? Thanks in advance.

  Read the article

• Ctrl-Alt-Delete doesn't unlock PC when VMPlayer is on

  - by NealWalters

  My desktop XP OS gets locked after I leave for x minutes. I have VMPlayer occupying full screen mode. I think the keyboard is redirected to VMWare. I press Ctrl + Alt + Delete and outer-machine XP is not unlocking. I think maybe keyboard is going to VMWare, because this seems to only happen when I have VMWare running. How do I unlock XP? Is there some magic key sequence?

  Read the article

• apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load...

  - by redguy..pl

  I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

  Read the article

• getting Internet connection sharing working in a slightly more complicated configuration

  - by tirichitirca t

  I have the following configuration: Computer A - Mac OSX 10.8.4, wireless & wired adapters Computer B - Windows 7 (64 bit), wireless & wired adapters, has internet connection via the wired adapter (ethernet) d-link wired/wireless router. Problem to solve: Connect from computer A to the internet through the wired connection of computer B. I tried the following: I set up a local network between A and B using the d-link router. The configuration is this: D-link router - 192.168.0.1 A - wired connection to the d-link router, static 192.168.0.101 (I could have used the wireless but I preferred the wired connection) B - wireless connection to the d-link router DHCP 192.168.0.102 (but I made sure it always gets the same address) B - wired connection to the internet using some address that begins with 10.x.y.z. In this configuration A can see B. I enabled ICS on the wired adapter of B. I set up the Gateway of A to point to B and DNS servers to point to the DNS servers specified for the 10.x.y.z address. It doesn't work, A goes only as far as B. It can ping the 10.x.y.z address of B though. I then found this article: http://terrybritton.com/windows-internet-connection-sharing-ics-not-working-with-linux-bridging-is-the-solution-916/. Terry is suggesting that a bridge should be defined on B between the two connections. I tried that but basically computer B is screwed as soon as I create the bridge. It can't connect to the internet anymore. It is as if the network bridge seems to think the traffic to the internet should go from the wired connection to the wireless and not the other way around. The other thing that puzzles me is the router itself. In general the router needs an internet address. In a normal configuration it is the router that gets the ip address and the internet traffic goes through the router. In my case I am not interested in that. So, any suggestions to get this working? I wouldn't shy away from using a commercial software but I would think windows 7 should allow me to do it. Thanks

  Read the article

• setting up a proxy to mirror an SSH SOCKS connection

  - by aresnick

  I have two remote machines, remote1 and remote2. remote2 is only running sshd, and I can't run anything else on it. remote1 is a full-fledged server to which I have complete access. I can run a SOCKS proxy on remote2 via ssh -f -N -D *:8080 me@remote2 which lets me expose a SOCKS proxy on port 8080 on remote1. I'd like to authenticate this so that the proxy isn't sitting open. How can I do this? It seems like I should be able to use delegate, but I can't even seem to get its HTTP proxy functionality working. When I run delegated -r -P8081 SERVER=http PERMIT="*:*:*" REMITTABLE="*" I can't even get it to work on port 8081. Anyway, I was hoping someone could point me in the right direction to let me authenticate access to the SOCKS proxy connection? That is, I want to be able to point my browser's proxy at remote1 and browse the internet through the SSH SOCKS proxy/tunnel to remote2. squid doesn't support a SOCKS parent =( Thanks!

  Read the article

• samba4 dc "network location cannot be reached"

  - by mitchell babies peters

  to clear the air centos 6.4? (maybe 6.3) as the server, running samba 4.0.10, trying to add a windows 7 client that has connectivity to the server. this is what windows shouts as me as it mocks my dependence on network infrastructure. "the network location cannot be reached." i have access to the domain contoller (dc) im using the dc as the domain name server (dns) already, and the name is correctly resolving, and it is correctly forwarding outbound traffic. i have nothing but self taught experience with active directory(ad) so if i am missing something obvious, please shout it out, but keep the verbal abuse to a minimum. i checked samba4DC + my error and found nothing relevant to my issue, if i missed something please point me in that direction. the weekend is just starting as i write this so i probably wont be back on to check this post for a day or three, but i might because this mystery is killing me. i followed the samba4 as a dc guide here and i supplimented gaps with this i have tested kerberos, ntp, and set my DC as the clock to sync to in my windows client and it appears to be a very small fraction of a second off so that shouldn't be it. also, firewall and selinux are both off for testing. i have also tried disabling ipv6, and cleared the registry of ipv6 records (allegedly the default samba4 as a DC runs as windows server 2003 which allegedly does not support or tolerate the existence of ipv6, fair warning, i heard this on the internet so it is probably a lie) i have tried a few other things that i have forgotten because i have been doing this for a day and a half now. ideas welcome. suggestions for alternatives are also welcome, as long as they are free. i was given a budget of $0 dollars and told to implement active directory (no prior knowledge of active directory at that point).

  Read the article

• Graphics and USB devices freezing soon after OS loads

  - by Andrew

  I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

  Read the article

• Windows Server 2008 R2 DNS - One IP, multiple servers

  - by Blu Dragon

  I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

  Read the article

< Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >