Search Results

Search found 16176 results on 648 pages for 'oracle calendar'.

Page 468/648 | < Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • Solaris Administration Web GUI?

    - by Robert C
    I recently installed Solaris 11 x86 text install (http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen) to be used as a file server running ZFS. I noticed that I'm given the bare minimum in terms of packages. Is there an official oracle web GUI for managing ZFS? I ran a netstat and it doesn't appear to have installed any webserver thats listening. I saw something from a couple years ago, but apparently it's not packaged or maintained anymore (https://blogs.oracle.com/talley/entry/manage_zfs_from_your_browser). I tried pkg install network-console, but it says that the package isn't available for my platform. Any ideas? I'd like to stick with Oracle Solaris instead of the open source alternatives, if possible.

    Read the article

  • Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

    - by AlexOdin
    What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • LDAP :Failed to find add in mandatory or optional attribute list

    - by Manju Prabhu
    I am trying to import an ldif file which has following content- DN: cn=myUser,cn=Users,dc=us,dc=oracle,dc=com objectclass: top objectclass: person objectclass: organizationalPerson objectclass: inetorgperson objectclass: orcluser objectclass: orcluserV2 cn: myUser givenname: myUser mail: myUser orclsamaccountname: myUser sn: myUser uid: myUser userpassword:: somepassword dn: cn=Administrator,cn=Groups,dc=us,dc=oracle,dc=com objectclass: person changetype: modify add: uniquemember uniquemember: cn=myUser,cn=Users,dc=us,dc=oracle,dc=com When I do this, LDAP throws follwing error javax.naming.directory.SchemaViolationException: [LDAP: error code 65 - Failed to find add in mandatory or optional attribute list.]; remaining name 'cn=Administrator,cn=Groups,dc=us,dc=oracle,dc=com' The user gets imported, but it is not added to the group(Group exists). What am i missing ?

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • Setfacl configuration issue in Linux

    - by Balualways
    I am configuring a Linux Server with ACL[Access Control Lists]. It is not allowing me to perform setfacl operation on one of the directoriy /xfiles. I am able to perform the setfacl on other directories as /tmp /op/applocal/. I am getting the error as : root@asifdl01devv # setfacl -m user:eqtrd:rw-,user:feedmgr:r--,user::---,group::r--,mask:rw-,other:--- /xfiles/change1/testfile setfacl: /xfiles/change1/testfile: Operation not supported I have defined my /etc/fstab as /dev/ROOTVG/rootlv / ext3 defaults 1 1 /dev/ROOTVG/varlv /var ext3 defaults 1 2 /dev/ROOTVG/optlv /opt ext3 defaults 1 2 /dev/ROOTVG/crashlv /var/crash ext3 defaults 1 2 /dev/ROOTVG/tmplv /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/ROOTVG/swaplv swap swap defaults 0 0 /dev/APPVG/home /home ext3 defaults 1 2 /dev/APPVG/archives /archives ext3 defaults 1 2 /dev/APPVG/test /test ext3 defaults 1 2 /dev/APPVG/oracle /opt/oracle ext3 defaults 1 2 /dev/APPVG/ifeeds /xfiles ext3 defaults 1 2 I have a solaris server where the vfstab is defined as cat vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - /dev/vx/dsk/bootdg/swapvol - - swap - no - swap - /tmp tmpfs - yes size=1024m /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no logging /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no logging /dev/vx/dsk/bootdg/home /dev/vx/rdsk/bootdg/home /home ufs 2 yes logging /dev/vx/dsk/APP/test /dev/vx/rdsk/APP/test /test vxfs 3 yes - /dev/vx/dsk/APP/archives /dev/vx/rdsk/APP/archives /archives vxfs 3 yes - /dev/vx/dsk/APP/oracle /dev/vx/rdsk/APP/oracle /opt/oracle vxfs 3 yes - /dev/vx/dsk/APP/xfiles /dev/vx/rdsk/APP/xfiles /xfiles vxfs 3 yes - I am not able to find out the issue. Any help would be appreciated.

    Read the article

  • ODSI + weblogic = JDBC problem

    - by Giuseppe Di Federico
    I'm currently developing a web service using ODSI through Oracle Workshop for WebLogic (ex AquaLogic). I created a datasource on weblogic using the driver "Oracle thin driver 10g", the test succeed on WebLogic. (My Database is Oracle 10 10.2.0.1.0) The problem occours when I try to create the Phisical Data Service in the Oracle Workshop. I choose the following options: Data source type = Relational Data source = [THE CORRECT NAME OF THE SOURCE SET ON WEBLOGIC] Database type = ??? Aqualogic, doesn't allow me to select the database type. I guess is a problem related to the driver set on weblogic... but I ain't sure.Does someone know the nature of my problem ? Tnx

    Read the article

  • Why use Google Apps Sync for Outlook to sync email?

    - by Howiecamp
    I currently use Outlook 2007 against an Exchange server for my email and will be moving to Google Apps. There are a number of ways to import your existing email and calendar entries into Google Apps Gmail (e.g. including the Google Apps Sync for Outlook tool), the Google Email Uploader, and copying messages using an IMAP client) so I'm covered on the import side. I'm trying to understand the use cases for the Google Apps Sync for Outlook tool http://mail.google.com/support/bin/topic.py?topic=23333 with respect to email and calendar entries. The description says it syncs your Outlook email and calendar items with Google Apps, but doesn't using Outlook as an IMAP client against Google Apps do the same?

    Read the article

  • added shell script to sudoers still getting permission denied

    - by Bill S
    I don't understand this? Other uses of sudo work fine. [oracle@o plugins]$ su Password: [root@ plugins]# su nrpe bash-3.2$ /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh bash: /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh: Permission denied bash-3.2$ sudo -l Matching Defaults entries for nrpe on this host: env_reset, env_keep="COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR LS_COLORS MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY" Runas and Command-specific defaults for nrpe: User nrpe may run the following commands on this host: (ALL) NOPASSWD: /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh bash-3.2$

    Read the article

  • .htaccess rewrite all queries to static page

    - by user127219
    I have an account where hundreds of inbound links to their calender are showing up as 404 (they moved their site to a new platform). I would like to make a wildcard redirection of all URLs with a query to their old event calender to land on a new static page, and do the same for their webstore queries. I've tried several variations, but can't seem to get it to work. CASE 1: I need to redirect URLs like these (note the difference between "showDay" and "showWeek"): apps/calendar/showWeek?calID=5107976&year=2011&month=7&day=10 apps/calendar/showDay?calID=5107976&year=2011&month=9&day=10 To: http://domain.com/events/ CASE 2: And also URLs like these: apps/webstore/products/show/1927074 TO: http://subdomain.domain.com/ I can't seem to get the syntax right to take all of the URLS and redirect them. I'm looking for the equivalent of a wildcard like "apps/calendar/*" would give you at a command line. Any help is appreciated!

    Read the article

  • Generics and Performance question.

    - by Tarmon
    Hey Everyone, I was wondering if anyone could look over a class I wrote, I am receiving generic warnings in Eclipse and I am just wondering if it could be cleaned up at all. All of the warnings I received are surrounded in ** in my code below. The class takes a list of strings in the form of (hh:mm AM/PM) and converts them into HourMinute objects in order to find the first time in the list that comes after the current time. I am also curious about if there are more efficient ways to do this. This works fine but the student in me just wants to find out how I could do this better. public class FindTime { private String[] hourMinuteStringArray; public FindTime(String[] hourMinuteStringArray){ this.hourMinuteStringArray = hourMinuteStringArray; } public int findTime(){ HourMinuteList hourMinuteList = convertHMStringArrayToHMArray(hourMinuteStringArray); Calendar calendar = new GregorianCalendar(); int hour = calendar.get(Calendar.HOUR_OF_DAY); int minute = calendar.get(Calendar.MINUTE); HourMinute now = new HourMinute(hour,minute); int nearestTimeIndex = findNearestTimeIndex(hourMinuteList, now); return nearestTimeIndex; } private int findNearestTimeIndex(HourMinuteList hourMinuteList, HourMinute now){ HourMinute current; int position = 0; Iterator<HourMinute> iterator = **hourMinuteList.iterator()**; while(iterator.hasNext()){ current = (HourMinute) iterator.next(); if(now.compareTo(current) == -1){ return position; } position++; } return position; } private static HourMinuteList convertHMStringArrayToHMArray(String[] times){ FindTime s = new FindTime(new String[1]); HourMinuteList list = s.new HourMinuteList(); String[] splitTime = new String[3]; for(String time : times ){ String[] tempFirst = time.split(":"); String[] tempSecond = tempFirst[1].split(" "); splitTime[0] = tempFirst[0]; splitTime[1] = tempSecond[0]; splitTime[2] = tempSecond[1]; int hour = Integer.parseInt(splitTime[0]); int minute = Integer.parseInt(splitTime[1]); HourMinute hm; if(splitTime[2] == "AM"){ hm = s.new HourMinute(hour,minute); } else if((splitTime[2].equals("PM")) && (hour < 12)){ hm = s.new HourMinute(hour + 12,minute); } else{ hm = s.new HourMinute(hour,minute); } **list.add(hm);** } return list; } class **HourMinuteList** extends **ArrayList** implements RandomAccess{ } class HourMinute implements **Comparable** { int hour; int minute; public HourMinute(int hour, int minute) { setHour(hour); setMinute(minute); } int getMinute() { return this.minute; } String getMinuteString(){ if(this.minute < 10){ return "0" + this.minute; }else{ return "" + this.minute; } } int getHour() { return this.hour; } void setHour(int hour) { this.hour = hour; } void setMinute(int minute) { this.minute = minute; } @Override public int compareTo(Object aThat) { if (aThat instanceof HourMinute) { HourMinute that = (HourMinute) aThat; if (this.getHour() == that.getHour()) { if (this.getMinute() > that.getMinute()) { return 1; } else if (this.getMinute() < that.getMinute()) { return -1; } else { return 0; } } else if (this.getHour() > that.getHour()) { return 1; } else if (this.getHour() < that.getHour()) { return -1; } else { return 0; } } return 0; } } If you have any questions let me know. Thanks, Rob

    Read the article

  • Multiple Notifications Not Firing

    - by motionpotion
    I'm scheduling two notifications as shown below. The app is a long-lived app. One local notification is scheduled to run every hour. The other is scheduled to run once per day. Only the second scheduled notification (the hourly notifcation) fires. - (void)scheduleNotification { LogInfo(@"IN scheduleNotification - DELETEYESTERDAY NOTIFICATION SCHEDULED."); UILocalNotification *notif = [[UILocalNotification alloc] init]; NSDictionary *deleteDict = [NSDictionary dictionaryWithObject:@"DeleteYesterday" forKey:@"DeleteYesterday"]; NSCalendar *calendar = [NSCalendar currentCalendar]; NSDateComponents *components = [[NSDateComponents alloc] init]; components = [[NSCalendar currentCalendar] components:NSDayCalendarUnit | NSMonthCalendarUnit | NSYearCalendarUnit fromDate:[NSDate date]]; NSInteger day = [components day]; NSInteger month = [components month]; NSInteger year = [components year]; [components setDay: day]; [components setMonth: month]; [components setYear: year]; [components setHour: 00]; [components setMinute: 45]; [components setSecond: 0]; [calendar setTimeZone: [NSTimeZone systemTimeZone]]; NSDate *dateToFire = [calendar dateFromComponents:components]; notif.fireDate = dateToFire; notif.timeZone = [NSTimeZone systemTimeZone]; notif.repeatInterval = NSDayCalendarUnit; notif.userInfo = deleteDict; [[UIApplication sharedApplication] scheduleLocalNotification:notif]; } and then I schedule this after above: - (void)scheduleHeartBeat { LogInfo(@"IN scheduleHeartBeat - HEARTBEAT NOTIFICATION SCHEDULED."); UILocalNotification *heartbeat = [[UILocalNotification alloc] init]; NSDictionary *heartbeatDict = [NSDictionary dictionaryWithObject:@"HeartBeat" forKey:@"HeartBeat"]; heartbeat.userInfo = heartbeatDict; NSCalendar *calendar = [NSCalendar currentCalendar]; NSDateComponents *components = [[NSDateComponents alloc] init]; components = [[NSCalendar currentCalendar] components:NSDayCalendarUnit | NSMonthCalendarUnit | NSYearCalendarUnit fromDate:[NSDate date]]; NSInteger day = [components day]; NSInteger month = [components month]; NSInteger year = [components year]; [components setDay: day]; [components setMonth: month]; [components setYear: year]; [components setHour: 00]; [components setMinute: 50]; [components setSecond: 0]; [calendar setTimeZone: [NSTimeZone systemTimeZone]]; NSDate *dateToFire = [calendar dateFromComponents:components]; heartbeat.fireDate = dateToFire; heartbeat.timeZone = [NSTimeZone systemTimeZone]; heartbeat.repeatInterval = NSHourCalendarUnit; [[UIApplication sharedApplication] scheduleLocalNotification:heartbeat]; } The above are scheduled when the app launches in the viewDidLoad of the main view controller. - (void)viewDidLoad { [self scheduleNotification]; [self scheduleHeartBeat]; [super viewDidLoad]; //OTHER CODE HERE } Then in the appdelegate I have the following: - (void)application:(UIApplication *)application didReceiveLocalNotification:(UILocalNotification *)notification { LogInfo(@"IN didReceiveLocalNotification NOTIFICATION RECEIVED."); NSString *notificationHeartBeat = nil; NSString *notificationDeleteYesterday = nil; application.applicationIconBadgeNumber = 0; if (notification) { notificationHeartBeat = [notification.userInfo objectForKey:@"HeartBeat"]; notificationDeleteYesterday = [notification.userInfo objectForKey:@"DeleteYesterday"]; LogInfo(@"IN didReceiveLocalNotification HEARTBEAT NOTIFICATION TYPE: %@", notificationHeartBeat); LogInfo(@"IN didReceiveLocalNotification DELETEYESTERDAY NOTIFICATION TYPE: %@", notificationDeleteYesterday); } if ([notificationHeartBeat isEqualToString:@"HeartBeat"]) { //CREATE THE HEARTBEAT LogInfo(@"CREATING THE HEARTBEAT."); //CALL THE FUNCTIONALITY HERE THAT CREATES HEARTBEAT. } if ([notificationDeleteYesterday isEqualToString:@"DeleteYesterday"]) { //DELETE YESTERDAYS RECORDS LogInfo(@"DELETING YESTERDAYS RECORDS."); } } The notification that is scheduled last (scheduleHeartBeat) is the only notification that is fired. Could somebody help me figure out why this is happening?

    Read the article

  • Quotas - Using quotas on ZFSSA shares and projects and users

    - by Steve Tunstall
    So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool.  Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share.  Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full.  That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB.  So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person.  Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that.  Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works.  Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did.   Go back to any share or project. You will see that you now have four new, custom properties on the bottom.  Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user.  After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set.  Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I?    That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end.  After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB  You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur.  For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them.  I hope these tips have helped you out there. Quotas can be fun. 

    Read the article

  • What's up with LDoms: Part 1 - Introduction & Basic Concepts

    - by Stefan Hinker
    LDoms - the correct name is Oracle VM Server for SPARC - have been around for quite a while now.  But to my surprise, I get more and more requests to explain how they work or to give advise on how to make good use of them.  This made me think that writing up a few articles discussing the different features would be a good idea.  Now - I don't intend to rewrite the LDoms Admin Guide or to copy and reformat the (hopefully) well known "Beginners Guide to LDoms" by Tony Shoumack from 2007.  Those documents are very recommendable - especially the Beginners Guide, although based on LDoms 1.0, is still a good place to begin with.  However, LDoms have come a long way since then, and I hope to contribute to their adoption by discussing how they work and what features there are today.  In this and the following posts, I will use the term "LDoms" as a common abbreviation for Oracle VM Server for SPARC, just because it's a lot shorter and easier to type (and presumably, read). So, just to get everyone on the same baseline, lets briefly discuss the basic concepts of virtualization with LDoms.  LDoms make use of a hypervisor as a layer of abstraction between real, physical hardware and virtual hardware.  This virtual hardware is then used to create a number of guest systems which each behave very similar to a system running on bare metal:  Each has its own OBP, each will install its own copy of the Solaris OS and each will see a certain amount of CPU, memory, disk and network resources available to it.  Unlike some other type 1 hypervisors running on x86 hardware, the SPARC hypervisor is embedded in the system firmware and makes use both of supporting functions in the sun4v SPARC instruction set as well as the overall CPU architecture to fulfill its function. The CMT architecture of the supporting CPUs (T1 through T4) provide a large number of cores and threads to the OS.  For example, the current T4 CPU has eight cores, each running 8 threads, for a total of 64 threads per socket.  To the OS, this looks like 64 CPUs.  The SPARC hypervisor, when creating guest systems, simply assigns a certain number of these threads exclusively to one guest, thus avoiding the overhead of having to schedule OS threads to CPUs, as do typical x86 hypervisors.  The hypervisor only assigns CPUs and then steps aside.  It is not involved in the actual work being dispatched from the OS to the CPU, all it does is maintain isolation between different guests. Likewise, memory is assigned exclusively to individual guests.  Here,  the hypervisor provides generic mappings between the physical hardware addresses and the guest's views on memory.  Again, the hypervisor is not involved in the actual memory access, it only maintains isolation between guests. During the inital setup of a system with LDoms, you start with one special domain, called the Control Domain.  Initially, this domain owns all the hardware available in the system, including all CPUs, all RAM and all IO resources.  If you'd be running the system un-virtualized, this would be what you'd be working with.  To allow for guests, you first resize this initial domain (also called a primary domain in LDoms speak), assigning it a small amount of CPU and memory.  This frees up most of the available CPU and memory resources for guest domains.  IO is a little more complex, but very straightforward.  When LDoms 1.0 first came out, the only way to provide IO to guest systems was to create virtual disk and network services and attach guests to these services.  In the meantime, several different ways to connect guest domains to IO have been developed, the most recent one being SR-IOV support for network devices released in version 2.2 of Oracle VM Server for SPARC. I will cover these more advanced features in detail later.  For now, lets have a short look at the initial way IO was virtualized in LDoms: For virtualized IO, you create two services, one "Virtual Disk Service" or vds, and one "Virtual Switch" or vswitch.  You can, of course, also create more of these, but that's more advanced than I want to cover in this introduction.  These IO services now connect real, physical IO resources like a disk LUN or a networt port to the virtual devices that are assigned to guest domains.  For disk IO, the normal case would be to connect a physical LUN (or some other storage option that I'll discuss later) to one specific guest.  That guest would be assigned a virtual disk, which would appear to be just like a real LUN to the guest, while the IO is actually routed through the virtual disk service down to the physical device.  For network, the vswitch acts very much like a real, physical ethernet switch - you connect one physical port to it for outside connectivity and define one or more connections per guest, just like you would plug cables between a real switch and a real system. For completeness, there is another service that provides console access to guest domains which mimics the behavior of serial terminal servers. The connections between the virtual devices on the guest's side and the virtual IO services in the primary domain are created by the hypervisor.  It uses so called "Logical Domain Channels" or LDCs to create point-to-point connections between all of these devices and services.  These LDCs work very similar to high speed serial connections and are configured automatically whenever the Control Domain adds or removes virtual IO. To see all this in action, now lets look at a first example.  I will start with a newly installed machine and configure the control domain so that it's ready to create guest systems. In a first step, after we've installed the software, let's start the virtual console service and downsize the primary domain.  root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- UART 512 261632M 0.3% 2d 13h 58m root@sun # ldm add-vconscon port-range=5000-5100 \ primary-console primary root@sun # svcadm enable vntsd root@sun # svcs vntsd STATE STIME FMRI online 9:53:21 svc:/ldoms/vntsd:default root@sun # ldm set-vcpu 16 primary root@sun # ldm set-mau 1 primary root@sun # ldm start-reconf primary root@sun # ldm set-memory 7680m primary root@sun # ldm add-config initial root@sun # shutdown -y -g0 -i6 So what have I done: I've defined a range of ports (5000-5100) for the virtual network terminal service and then started that service.  The vnts will later provide console connections to guest systems, very much like serial NTS's do in the physical world. Next, I assigned 16 vCPUs (on this platform, a T3-4, that's two cores) to the primary domain, freeing the rest up for future guest systems.  I also assigned one MAU to this domain.  A MAU is a crypto unit in the T3 CPU.  These need to be explicitly assigned to domains, just like CPU or memory.  (This is no longer the case with T4 systems, where crypto is always available everywhere.) Before I reassigned the memory, I started what's called a "delayed reconfiguration" session.  That avoids actually doing the change right away, which would take a considerable amount of time in this case.  Instead, I'll need to reboot once I'm all done.  I've assigned 7680MB of RAM to the primary.  That's 8GB less the 512MB which the hypervisor uses for it's own private purposes.  You can, depending on your needs, work with less.  I'll spend a dedicated article on sizing, discussing the pros and cons in detail. Finally, just before the reboot, I saved my work on the ILOM, to make this configuration available after a powercycle of the box.  (It'll always be available after a simple reboot, but the ILOM needs to know the configuration of the hypervisor after a power-cycle, before the primary domain is booted.) Now, lets create a first disk service and a first virtual switch which is connected to the physical network device igb2. We will later use these to connect virtual disks and virtual network ports of our guest systems to real world storage and network. root@sun # ldm add-vds primary-vds root@sun # ldm add-vswitch net-dev=igb2 switch-primary primary You are free to choose whatever names you like for the virtual disk service and the virtual switch.  I strongly recommend that you choose names that make sense to you and describe the function of each service in the context of your implementation.  For the vswitch, for example, you could choose names like "admin-vswitch" or "production-network" etc. This already concludes the configuration of the control domain.  We've freed up considerable amounts of CPU and RAM for guest systems and created the necessary infrastructure - console, vts and vswitch - so that guests systems can actually interact with the outside world.  The system is now ready to create guests, which I'll describe in the next section. For further reading, here are some recommendable links: The LDoms 2.2 Admin Guide The "Beginners Guide to LDoms" The LDoms Information Center on MOS LDoms on OTN

    Read the article

  • Fix: Azure Disabled over 49 cents? Beware of using a Java Virtual Machine on Microsoft Azure

    - by Ken Cox [MVP]
    I love my MSDN Azure account. I can spin up a demo/dev app or VM in seconds. In fact, it is so easy to create a virtual machine that Azure shut down my whole account! Last night I spun up a Java Virtual Machine to play with some Android stuff. My mistake was that I didn’t read the Virtual Machine pricing warning: “I have a MSDN Azure Benefit subscription. Can I use my monthly Azure credits to purchase Oracle software?” “No, Azure credits in our MSDN offers are not applicable to Oracle software. In order to purchase Oracle software in the MSDN Azure Benefit subscription, customers need to turn off their {0} spending limit and pay at the regular pay-as-you-go rate. Otherwise, Oracle usage will hit the {1} spending limit and the subscription will be immediately disabled.”  Immediately disabled? Yup. Everything connected to the subscription was shut off, deallocated, rendered useless - even the free Web sites and the free Sendgrid email service.  The fix? I had to remove the spending limit from my account so I could pay $0.49 (49 cents) for the JVM usage. I still had $134.10 in credits remaining for regular usage with 6 days left in the billing month.  Now the restoration/clean-up begins… figuring out how to get the web sites and services back online.  To me, the preferable way would be for Azure to warn me when setting up a JVM that I had no way of paying for the service. In the alternative, shut down just the offending services – the ones that can’t be covered by the regular credits. What a mess.

    Read the article

  • The UIManager Pattern

    - by Duncan Mills
    One of the most common mistakes that I see when reviewing ADF application code, is the sin of storing UI component references, most commonly things like table or tree components in Session or PageFlow scope. The reasons why this is bad are simple; firstly, these UI object references are not serializable so would not survive a session migration between servers and secondly there is no guarantee that the framework will re-use the same component tree from request to request, although in practice it generally does do so. So there danger here is, that at best you end up with an NPE after you session has migrated, and at worse, you end up pinning old generations of the component tree happily eating up your precious memory. So that's clear, we should never. ever, be storing references to components anywhere other than request scope (or maybe backing bean scope). So double check the scope of those binding attributes that map component references into a managed bean in your applications.  Why is it Such a Common Mistake?  At this point I want to examine why there is this urge to hold onto these references anyway? After all, JSF will obligingly populate your backing beans with the fresh and correct reference when needed.   In most cases, it seems that the rational is down to a lack of distinction within the application between what is data and what is presentation. I think perhaps, a cause of this is the logical separation between business data behind the ADF data binding (#{bindings}) façade and the UI components themselves. Developers tend to think, OK this is my data layer behind the bindings object and everything else is just UI.  Of course that's not the case.  The UI layer itself will have state which is intrinsically linked to the UI presentation rather than the business model, but at the same time should not be tighly bound to a specific instance of any single UI component. So here's the problem.  I think developers try and use the UI components as state-holders for this kind of data, rather than using them to represent that state. An example of this might be something like the selection state of a tabset (panelTabbed), you might be interested in knowing what the currently disclosed tab is. The temptation that leads to the component reference sin is to go and ask the tabset what the selection is.  That of course is fine in context - e.g. a handler within the same request scoped bean that's got the binding to the tabset. However, it leads to problems when you subsequently want the same information outside of the immediate scope.  The simple solution seems to be to chuck that component reference into session scope and then you can simply re-check in the same way, leading of course to this mistake. Turn it on its Head  So the correct solution to this is to turn the problem on its head. If you are going to be interested in the value or state of some component outside of the immediate request context then it becomes persistent state (persistent in the sense that it extends beyond the lifespan of a single request). So you need to externalize that state outside of the component and have the component reference and manipulate that state as needed rather than owning it. This is what I call the UIManager pattern.  Defining the Pattern The  UIManager pattern really is very simple. The premise is that every application should define a session scoped managed bean, appropriately named UIManger, which is specifically responsible for holding this persistent UI component related state.  The actual makeup of the UIManger class varies depending on a needs of the application and the amount of state that needs to be stored. Generally I'll start off with a Map in which individual flags can be created as required, although you could opt for a more formal set of typed member variables with getters and setters, or indeed a mix. This UIManager class is defined as a session scoped managed bean (#{uiManager}) in the faces-config.xml.  The pattern is to then inject this instance of the class into any other managed bean (usually request scope) that needs it using a managed property.  So typically you'll have something like this:   <managed-bean>     <managed-bean-name>uiManager</managed-bean-name>     <managed-bean-class>oracle.demo.view.state.UIManager</managed-bean-class>     <managed-bean-scope>session</managed-bean-scope>   </managed-bean>  When is then injected into any backing bean that needs it:    <managed-bean>     <managed-bean-name>mainPageBB</managed-bean-name>     <managed-bean-class>oracle.demo.view.MainBacking</managed-bean-class>     <managed-bean-scope>request</managed-bean-scope>     <managed-property>       <property-name>uiManager</property-name>       <property-class>oracle.demo.view.state.UIManager</property-class>       <value>#{uiManager}</value>     </managed-property>   </managed-bean> In this case the backing bean in question needs a member variable to hold and reference the UIManager: private UIManager _uiManager;  Which should be exposed via a getter and setter pair with names that match the managed property name (e.g. setUiManager(UIManager _uiManager), getUiManager()).  This will then give your code within the backing bean full access to the UI state. UI components in the page can, of course, directly reference the uiManager bean in their properties, for example, going back to the tab-set example you might have something like this: <af:paneltabbed>   <af:showDetailItem text="First"                disclosed="#{uiManager.settings['MAIN_TABSET_STATE'].['FIRST']}"> ...   </af:showDetailItem>   <af:showDetailItem text="Second"                      disclosed="#{uiManager.settings['MAIN_TABSET_STATE'].['SECOND']}">     ...   </af:showDetailItem>   ... </af:panelTabbed> Where in this case the settings member within the UI Manger is a Map which contains a Map of Booleans for each tab under the MAIN_TABSET_STATE key. (Just an example you could choose to store just an identifier for the selected tab or whatever, how you choose to store the state within UI Manger is up to you.) Get into the Habit So we can see that the UIManager pattern is not great strain to implement for an application and can even be retrofitted to an existing application with ease. The point is, however, that you should always take this approach rather than committing the sin of persistent component references which will bite you in the future or shotgun scattered UI flags on the session which are hard to maintain.  If you take the approach of always accessing all UI state via the uiManager, or perhaps a pageScope focused variant of it, you'll find your applications much easier to understand and maintain. Do it today!

    Read the article

  • About Entitlement Grants in ADF Security of JDeveloper 11.1.1.4

    - by frank.nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle JDeveloper 11.1.1.4 comes with a new ADF Security feature called "entitlement grants". This has nothing to do with Oracle Entitlement Server (OES) but is the ability to group resources into permission sets so they can be granted with a single grant statement. For example, as good practices when organizing your projects, you may have grouped your bounded task flows by functionality and responsibility in sub folders under the WEB-INF directory. If one of the folders holds bounded task flows that are accessible to all authenticated users, you may create an entitlement grant allAuthUserBTF and select all bounded task flows that are accessible for authenticated users as resources. You can then grant allAuthUserBTF to the authenticated-role so that with only a single grant statement all selected bounded task flows are protected. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <permission-sets>         <permission-set>             <name>PublicBoundedTaskFlows</name>             <member-resources>               <member-resource>                 <resource-name>                      /WEB-INF/public/home-btf.xml#home-btf                 </resource-name>                 <type-name-ref>TaskFlowResourceType</type-name-ref>                 <display-name> ... </display-name>                 <actions>view</actions>               </member-resource>               <member-resource>                 <resource-name>                         /WEB-INF/public/preferences-btf.xml#preferences-btf                </resource-name>                 <type-name-ref>TaskFlowResourceType</type-name-ref>                 <display-name>...</display-name>                 <actions>view</actions>               </member-resource>             </member-resources>           </permission-set>   </permission-sets> The grant statement for this permission set is added as shown below <grant>   <grantee>     <principals>        <principal>             <name>authenticated-role</name>             <class>oracle.security.jps.internal.core.principals.JpsAuthenticatedRoleImpl</class>         </principal>       </principals>     </grantee>     <permission-set-refs>         <permission-set-ref>            <name>PublicBoundedTaskFlows</name>         </permission-set-ref>      </permission-set-refs> </grant>

    Read the article

  • New database profiling support in ANTS Performance Profiler

    - by Ben Emmett
    In May last year, the ANTS Performance Profiler team added the ability to profile database requests your application makes to SQL Server or Oracle. The really cool thing is that you’re shown those requests in the application’s call tree, so you can see what .NET code caused those queries to run. It’s particularly helpful if you’re using an ORM which automagically generates and runs queries for you, but which doesn’t necessarily do it in the most efficient way possible. Now by popular demand, we’ve added support for profiling MySQL (or MariaDB) and PostgreSQL, so you can see queries run against those databases too. Some of you have also said that you’re using the Devart dotConnect data providers instead of the native .NET ones, so we’ve added support for those drivers too. Hope it helps! For the record, here’s a list of supported connectors (ones in bold are new): SQL Server .NET Framework Data Provider Devart dotConnect for SQL Server Oracle .NET Framework Data Provider Oracle Data Provider for .NET Devart dotConnect for Oracle MySQL / MariaDB MySQL Connector/Net Devart dotConnect for MySQL PostgreSQL Npgsql .NET Data Provider for PostgreSQL Devart dotConnect for PostgreSQL SQL Server Compact Edition .NET Framework Data Provider for SQL Server Compact Edition Devart dotConnect for SQL Server Pro Have we missed a connector or database which you’d find useful? Tell us about it in the comments or by emailing [email protected]. Ben

    Read the article

  • Using the OAM Mobile & Social SDK to secure native mobile apps - Part 2 : OAM Mobile & Social Server configuration

    - by kanishkmahajan
    Objective  In the second part of this blog post I'll now cover configuration of OAM to secure our sample native apps developed using the iOS SDK. First, here are some key server side concepts: Application Profiles: An application profile is a logical representation of your application within OAM server. It could be a web (html/javascript) or native (iOS or Android) application. Applications may have different requirements for AuthN/AuthZ, and therefore each application that interacts with OAM Mobile & Social REST services must be uniquely defined. Service Providers: Service providers represent the back end services that are accessed by applications. With OAM Mobile & Social these services are in the areas of authentication, authorization and user profile access. A Service Provider then defines a type or class of service for authentication, authorization or user profiles. For example, the JWTAuthentication provider performs authentication and returns JWT (JSON Web Tokens) to the application. In contrast, the OAMAuthentication also provides authentication but uses OAM SSO tokens Service Profiles:  A Service Profile is a logical envelope that defines a service endpoint URL for a service provider for the OAM Mobile & Social Service. You can create multiple service profiles for a service provider to define token capabilities and service endpoints. Each service provider instance requires atleast one corresponding service profile.The  OAM Mobile & Social Service includes a pre-configured service profile for each pre-configured service provider. Service Domains: Service domains bind together application profiles and service profiles with an optional security handler. So now let's configure the OAM server. Additional details are in the OAM Documentation and this post simply provides an outline of configuration tasks required to configure OAM for securing native apps.  Configuration  Create The Application Profile Log on to the Oracle Access Management console and from System Configuration -> Mobile and Social -> Mobile Services, select "Create" under Application Profiles. You would do this  step twice - once for each of the native apps - AvitekInventory and AvitekScheduler. Enter the parameters for the new Application profile: Name:  The application name. In this example we use 'InventoryApp' for the AvitekInventory app and 'SchedulerApp' for the AvitekScheduler app. The application name configured here must match the application name in the settings for the deployed iOS application. BaseSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM server.  Mobile Configuration: Enable this checkbox for any mobile applications. This enables the SDK to collect and send Mobile specific attributes to the OAM server.  Webview: Controls the type of browser that the iOS application will use. The embedded browser (default) will render the browser within the application. External will use the system standalone browser. External can sometimes be preferable for debugging URLScheme: The URL scheme associated with the iOS apps that is also used as a custom URL scheme to register O/S handlers that will take control when OAM transfers control to device. For the AvitekInventory and the AvitekScheduler apps I used osa:// and client:// respectively. You set this scheme in Xcode while developing your iOS Apps under Info->URL Types.  Bundle Identifier : The fully qualified name of your iOS application. You typically set this when you create a new Xcode project or under General->Identity in Xcode. For the AvitekInventory and AvitekScheduler apps these were com.us.oracle.AvitekInventory and com.us.oracle.AvitekScheduler respectively.  Create The Service Domain Select create under Service domains. Create a name for your domain (AvitekDomain is what I've used). The name configured must match the service domain set in the iOS application settings. Under "Application Profile Selection" click the browse button. Choose the application profiles that you created in the previous step one by one. Set the InventoryApp as the SSO agent (with an automatic priority of 1) and the SchedulerApp as the SSO client. This associates these applications with this service domain and configures them in a 'circle of trust'.  Advance to the next page of the wizard to configure the services for this domain. For this example we will use the following services:  Authentication:   This will use the JWT (JSON Web Token) format authentication provider. The iOS application upon successful authentication will receive a signed JWT token from OAM Mobile & Social service. This token will be used in subsequent calls to OAM. Use 'MobileOAMAuthentication' here. Authorization:  The authorization provider. The SDK makes calls to this provider endpoint to obtain authorization decisions on resource requests. Use 'OAMAuthorization' here. User Profile Service:  This is the service that provides user profile services (attribute lookup, attribute modification). It can be any directory configured as a data source in OAM.  And that's it! We're done configuring our native apps. In the next section, let's look at some additional features that were mentioned in the earlier post that are automated by the SDK for the app developer i.e. these are areas that require no additional coding by the app developer when developing with the SDK as they only require server side configuration: Additional Configuration  Offline Authentication Select this option in the service domain configuration to allow users to log in and authenticate to the application locally. Clear the box to block users from authenticating locally. Strong Authentication By simply selecting the OAAMSecurityHandlerPlugin while configuring mobile related Service Domains, the OAM Mobile&Social service allows sophisticated device and client application registration logic as well as the advanced risk and fraud analysis logic found in OAAM to be applied to mobile authentication. Let's look at some scenarios where the OAAMSecurityHandlerPlugin gets used. First, when we configure OAM and OAAM to integrate together using the TAP scheme, then that integration kicks off by selecting the OAAMSecurityHandlerPlugin in the mobile service domain. This is how the mobile device is now prompted for KBA,OTP etc depending on the TAP scheme integration and the OAM users registered in the OAAM database. Second, when we configured the service domain, there were claim attributes there that are already pre-configured in OAM Mobile&Social service and we simply accepted the default values- these are the set of attributes that will be fetched from the device and passed to the server during registration/authentication as device profile attributes. When a mobile application requests a token through the Mobile Client SDK, the SDK logic will send the Device Profile attributes as a part of an HTTP request. This set of Device Profile attributes enhances security by creating an audit trail for devices that assists device identification. When the OAAM Security Plug-in is used, a particular combination of Device Profile attribute values is treated as a device finger print, known as the Digital Finger Print in the OAAM Administration Console. Each finger print is assigned a unique fingerprint number. Each OAAM session is associated with a finger print and the finger print makes it possible to log (and audit) the devices that are performing authentication and token acquisition. Finally, if the jail broken option is selected while configuring an application profile, the SDK detects a device is jail broken based on configured policy and if the OAAM handler is configured the plug-in can allow or block access to client device depending on the OAAM policy as well as detect blacklisted, lost or stolen devices and send a wipeout command that deletes all the mobile &social relevant data and blocks the device from future access. 1024x768 Social Logins Finally, let's complete this post by adding configuration to configure social logins for mobile applications. Although the Avitek sample apps do not demonstrate social logins this would be an ideal exercise for you based on the sample code provided in the earlier post. I'll cover the server side configuration here (with Facebook as an example) and you can retrofit the code to accommodate social logins by following the steps outlined in "Invoking Authentication Services" and add code in LoginViewController and maybe create a new delegate - AvitekRPDelegate based on the description in the previous post. So, here all you will need to do is configure an application profile for social login, configure a new service domain that uses the social login application profile, register the app on Facebook and finally configure the Facebook OAuth provider in OAM with those settings. Navigate to Mobile and Social, click on "Internet Identity Services" and create a new application profile. Here are the relevant parameters for the new application profile (-also we're not registering the social user in OAM with this configuration below, however that is a key feature as well): Name:  The application name. This must match the name of the of mobile application profile created for your application under Mobile Services. We used InventoryApp for this example. SharedSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM Mobile and Social service.  Mobile Application Return URL: After the Relying Party (social) login, the OAM Mobile & Social service will redirect to the iOS application using this URI. This is defined under Info->URL type and we used 'osa', so we define this here as 'osa://' Login Type: Choose to allow only internet identity authentication for this exercise. Authentication Service Endpoint : Make sure that /internetidentityauthentication is selected. Login to http://developers.facebook.com using your Facebook account and click on Apps and register the app as InventoryApp. Note that the consumer key and API secret gets generated automatically by the Facebook OAuth server. Navigate back to OAM and under Mobile and Social, click on "Internet Identity Services" and edit the Facebook OAuth Provider. Add the consumer key and API secret from the Facebook developers site to the Facebook OAuth Provider: Navigate to Mobile Services. Click on New to create a new service domain. In this example we call the domain "AvitekDomainRP". The type should be 'Mobile Application' and the application credential type 'User Token'. Add the application "InventoryApp" to the domain. Advance the next page of the wizard. Select the  default service profiles but ensure that the Authentication Service is set to 'InternetIdentityAuthentication'. Finish the creation of the service domain.

    Read the article

  • How to Properly Make use of Codeigniter's HMVC

    - by Branden Stilgar Sueper
    I have been having problems wrapping my brain around how to properly utilize the modular extension for Codeigniter. From what I understand, modules should be entirely independent of one another so I can work on one module and not have to worry about what module my teammate is working on. I am building a frontend and a backend to my site, and am having confusion about how I should structure my applications. The first part of my question is should I use the app root controllers to run modules, or should users go directly to the modules by urls? IE: in my welcome.php public function index() { $this->data['blog'] = Modules::run( 'blog' ); $this->data['main'] = Modules::run( 'random_image' ); $this->load->view('v_template', $this->data); } public function calendar() { $this->data['blog'] = Modules::run( 'blog' ); $this->data['main'] = Modules::run( 'calendar' ); $this->load->view('v_template', $this->data); } My second part of the question is should I create separate front/back end module folders -config -controllers welcome.php -admin admin.php -core -helpers -hooks -language -libraries -models -modules-back -dashboard -logged_in -login -register -upload_images -delete_images -modules-front -blog -calendar -random_image -search -views v_template.php -admin av_template.php Any help would be greatly appreciated.

    Read the article

  • can't run sqldeveloper on Ubuntu

    - by nazar_art
    I tried to install sqldeveloper by following way: Download SQL Developer from Oracle website (I chose Other Platforms download). Extract file to /opt: sudo unzip sqldeveloper-*-no-jre.zip -d /opt/ sudo chmod +x /opt/sqldeveloper/sqldeveloper.sh Linking over an in-path launcher for Oracle SQL Developer: sudo ln -s /opt/sqldeveloper/sqldeveloper.sh /usr/local/bin/sqldeveloper Edit /usr/local/bin/sqldeveloper.sh replace it's content to: #!/bin/bash cd /opt/sqldeveloper/sqldeveloper/bin ./sqldeveloper "$@" Run SQL Developer: sqldeveloper But it shows next output: nazar@lelyak-desktop:/opt/sqldeveloper? ./sqldeveloper.sh Oracle SQL Developer Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved. LOAD TIME : 401# # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f3b2dcacbe0, pid=20351, tid=139892273444608 # # JRE version: Java(TM) SE Runtime Environment (7.0_65-b17) (build 1.7.0_65-b17) # Java VM: Java HotSpot(TM) 64-Bit Server VM (24.65-b04 mixed mode linux-amd64 compressed oops) # Problematic frame: # C 0x00007f3b2dcacbe0 # # Core dump written. Default location: /opt/sqldeveloper/sqldeveloper/bin/core or core.20351 # # An error report file with more information is saved as: # /tmp/hs_err_pid20351.log # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # /opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 1193: 20351 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}" 134 nazar@lelyak-desktop:/opt/sqldeveloper? java -version java version "1.7.0_65" Java(TM) SE Runtime Environment (build 1.7.0_65-b17) Java HotSpot(TM) 64-Bit Server VM (build 24.65-b04, mixed mode) Here is content of /tmp/hs_err_pid20351.log How to solve this trouble?

    Read the article

  • Applying Interactive Sorting to Multiple Columns in Reporting Services

    - by smisner
    A nice feature that appeared first in SQL Server 2008 is the ability to allow the user to click a column header to sort that column. It defaults to an ascending sort first, but you can click the column again to switch to a descending sort. You can learn more about interactive sorts in general at the Adding Interactive Sort to a Data Region in Books Online. Not mentioned in the article is how to apply interactive sorting to multiple columns, hence the reason for this post! Let’s say that I have a simple table like this: To enable interactive sorting, I open the Text Box properties for each of the column headers – the ones in the top row. Here’s an example of how I set up basic interactive sorting: Now when I preview the report, I see icons appear in each text box on the header row to indicate that interactive sorting is enabled. The initial sort order that displays when you preview the report depends on how you design the report. In this case, the report sorts by Sales Territory Group first, and then by Calendar Year. Interactive sorting overrides the report design. So let’s say that I want to sort first by Calendar Year, and then by Sales Territory Group. To do this, I click the arrow to the right of Calendar Year, and then, while pressing the Shift key, I click the arrow to the right of Sales Territory Group twice (once for ascending order and then a second time for descending order). Now my report looks like this: This technique only seems to work when you have a minimum of three columns configured with interactive sorting. If I remove the property from one of the columns in the above example, and try to use the interactive sorting on the remaining two columns, I can sort only the first column. The sort on the second column gets ignored. I don’t know if that’s by design or a bug, but I do know that’s what I’m experiencing when I try it out!

    Read the article

  • Compute the AES-encryption key given the plaintext and its ciphertext?

    - by Null Pointers etc.
    I'm tasked with creating database tables in Oracle which contain encrypted strings (i.e., the columns are RAW). The strings are encrypted by the application (using AES, 128-bit key) and stored in Oracle, then later retrieved from Oracle and decrypted (i.e., Oracle itself never sees the unencrypted strings). I've come across this one column that will be one of two strings. I'm worried that someone will notice and presumably figure out what those two values to figure out the AES key. For example, if someone sees that the column is either Ciphertext #1 or #2: Ciphertext #1: BF,4F,8B,FE, 60,D8,33,56, 1B,F2,35,72, 49,20,DE,C6. Ciphertext #2: BC,E8,54,BD, F4,B3,36,3B, DD,70,76,45, 29,28,50,07. and knows the corresponding Plaintexts: Plaintext #1 ("Detroit"): 44,00,65,00, 74,00,72,00, 6F,00,69,00, 74,00,00,00. Plaintext #2 ("Chicago"): 43,00,68,00, 69,00,63,00, 61,00,67,00, 6F,00,00,00. can he deduce that the encryption key is "Buffalo"? 42,00,75,00, 66,00,66,00, 61,00,6C,00, 6F,00,00,00. I'm thinking that there should be only one 128-bit key that could convert Plaintext #1 to Ciphertext #1. Does this mean I should go to a 192-bit or 256-bit key instead, or find some other solution? (As an aside, here are two other ciphertexts for the same plaintexts but with a different key.) Ciphertext #1 A ("Detroit"): E4,28,29,E3, 6E,C2,64,FA, A1,F4,F4,96, FC,18,4A,C5. Ciphertext #2 A ("Chicago"): EA,87,30,F0, AC,44,5D,ED, FD,EB,A8,79, 83,59,53,B7.

    Read the article

  • CodePlex Daily Summary for Friday, May 30, 2014

    CodePlex Daily Summary for Friday, May 30, 2014Popular ReleasesSEToolbox: 01.032.014 Release 2: Fixed flaw in startup if second Toolbox was started. Added thumbnail zooming in load dialog. Added mirror for new ConveyorTubeCurvedMedium. Added dedicated server support :- Repair will not add missing player to dedicated server. Distances measured to origin (0,0,0) when no player exists. Dedicated Service Server game denied write access unless SEToolbox is run as Admin. Additional information in Load dialog. Installation of this version will replace older version.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Composite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.HigLabo: HigLabo_20140529: Fixed HttpClient ContentLength bug.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.StudioShell: StudioShell 1.6.6: placeholder release for WIX issue work artifactsMath.NET Numerics: Math.NET Numerics v3.0.0-beta02: Full History Linear Algebra: optimized sparse-sparse and sparse-diagonal matrix products. ~Christian Woltering transpose at storage level, optimized sparse transpose. ~Christian Woltering optimized inplace-map, indexed submatrix-map. optimized clearing a set of rows or columns. matrix FoldRows/FoldColumns. matrix column/row norms, normalization. prefer enums over boolean parameters (e.g. `Zeros.AllowSkip`). IsSymmetric is now a method, add IsConjugateSymmetric. breaking Eigen...QuickMon: Version 3.13: 1. Adding an Audio/sound notifier that can be used to simply draw attention to the application of a warning pr error state is returned by a collector. 2. Adding a property for Notifiers so it can be set to 'Attended', 'Unattended' or 'Both' modes. 3. Adding a WCF method to remote agent host so the version can be checked remotely. 4. Adding some 'Sample' monitor packs to installer. Note: this release and the next release (3.14 aka Pie release) will have some breaking changes and will be incom...fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksXsemmel - XML Editor and Viewer: 29-MAY-2014: WINDOWS XP IS NO LONGER SUPPORTED If you need support for WinXP, download release 15-MAR-2014 instead. FIX: Some minor issues NEW: Better visualisation of validation issues NEW: Printing CHG: Disabled Jumplist CHG: updated to .net 4.5, WinXP NO LONGER SUPPORTEDPerformance Analyzer for Microsoft Dynamics: DynamicsPerf 1.20: Version 1.20 Improved performance in PERFHOURLYROWDATA_VW Fixed error handling encrypted triggers Added logic ACTIVITYMONITORVW to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added logic to optional blocking to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added additional queries for investigating blocking Added logic to collect Baseline capture data (NOTE: QUERY_STATS table has entire procedure cache for that db during...Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Kartris E-commerce: Kartris v2.6002: Minor release: Double check that Logins_GetList sproc is present, sometimes seems to get missed earlier if upgrading which can give error when viewing logins page Added CSV and TXT export option; this is not Google Products compatible, but can give a good base for creating a file for some other systems such as Amazon Fixed some minor combination and options issues to improve interface back and front Turn bitcoin and some other gateways off by default Minor CSS changes Fixed currenc...SimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...New ProjectsBooki-Framework: A very super simple framework for develop application on .net (University assignment)C# Datalayer Using Stored Procedures for CRUD Operations: A C# .net data layer that uses stored procedures for crud operations working on any database, while still utilizing object orientated design practices.CoMaSy: Contact Management InfoComposite Iconote: Composite Iconote is a .NET composite. This is a Final Project of Component-Oriented Programming subject in Duta Wacana Christian University YogyakartaCredit Component: CreditComponent give you more attractive view to present who is the developer from any desktop software, many animation can introduce whom the developer isDaQiu: ?????????,??????????????????Database Helper: Rapid Development of CRUD Operationdi_academy_test: Test projectEasy Rent - Car rental software: Easy Rent software is an open source vehicle rental software.Excel Trader: Current project aims to provide an Excel(TM) interface through ExcelDNA for the IBRx, QFIXRx and SusicoTrader API.FXJ Learning Project: This is a learning project with TFS serviceImage View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. Try this out!Indonesian Red-Letter Day Calendar: This is an Indonesian version of Red Letter Day Calendar, a final project for Component Oriented Programming course in Duta Wacana Christian University.jquery learning: jquery learningMakePanoForGoogle: Converts Panorama created by Microsoft ICE to format compatible to Google ViewsPWA_AppWeb: This page and all its content were developed by José Brazeta, Luis Carta and João Martins as an assignment for Advanced Web Programing (AEP).SoccerEvaluator: Proyecto para realizar evaluaciones de marcadores de futbolTooltip Web Preview: WebPreview is a component which was made to preview a web page before the link is clicked.Traditional Calendar Component: Hello this is a component which will help you to convert BC calendar to Javanese Calendar and Chinese Calendar. Hope this can help you on developing aps :)Typed YetiBowl The Game: Typescript Version of Yetibowl, intended for comparing Yetibowl in Javascript vs Typescript

    Read the article

< Previous Page | 464 465 466 467 468 469 470 471 472 473 474 475  | Next Page >