Search Results

Search found 18954 results on 759 pages for 'connection reset'.

Page 469/759 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

  • File server share access intermittent/slow/machine unstable: win2k8r2

    - by Jack B.
    I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

    Read the article

  • Configuring network route between two routers on home network

    - by Paul
    I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

    Read the article

  • Windows 7 BSOD on startup

    - by Cristy
    I got a BSOD today after getting home from 11 hours of work... It seems to work in SAFE MODE (sometimes, not always) The BSOD says: SYSTEM_SERVICE_EXCEPTION STOP: 0x0000003b WimFsf.sys - Address FFFFF88001A6B76B base at FFFFF88001A600000, DateStamp 4a5bc362. Sometimes it shows the welcome screen, shows the destkop for a few seconds and then BSODs Already did: unplugged all the USB devices reset the CMOS I haven't installed any new software recently. What should I do? EDIT: I've managed to get into safe mode and it seems to works fine. When I go into normal mode it shows the desktop then it freezes... Is it more likely to be a software or hardware problem? EDIT2: I've managed to get into normal mode by disabling all the non-microsoft services & startup programs. One more thing: When I shut down my PC, on the "Logging off" screen appear some artifacts. I don't think it's because of my graphics card cause I've opened Black OPS and it worked fine. It's so strange... It still BSODS on startup (but there a ~=10% that it will not), and when it doesn't BSOD's it works fine...

    Read the article

  • Disabling LDAP Signing on Windows PDC in Local Policy

    - by Golmaal
    I just tripped over my own feet it seems. Playing around on a Windows 2008 R2 server (set up as domain controller), I was intrigued by certain warning event (event id 2886) which says: "To enhance the security of directory servers, you can configure both Active Directory Domain Services (AD DS) and Active Directory Lightweight Directory Services (AD LDS) to require signed Lightweight Directory Access Protocol (LDAP) binds." So I thoughtlessly did some Googling and set the relevant policies which enforce LDAP signing. Now I don't remember but I may have done that using Local Policy. Now I have setup a pfsense box which must authenticate AD users via LDAP. While the firewall can communicate over secure channel, it is difficult to manage the same for other packages such as Squid and SquidGuard. So now I have to disable i.e. undo those policy changes. The problem is that they are greyed out! The policies in question are LDAP server signing and LDAP client signing. I don't remember what I did but when I access these policies from Local Policy editor on the server, they are set to "Require Signing" and are greyed out. The same policies can still be set via Default Domain Controller option in Group Policy editor. So how can I reset these greyed out policies? Thanks

    Read the article

  • How can i export a folder of Firefox Bookmarks into a text file

    - by Memor-X
    I want to clean up my bookmark folders by getting rid of duplicated/links. i have created a program which will import 2 text files which contains a URL like this File 1: http://www.google/com http://anime.stackexchange.com/ https://www.fanfiction.net/guidelines/ https://www.fanfiction.net/anime/Magical-Girl-Lyrical-Nanoha/?&srt=1&g1=2&lan=1&r=103&s=2 File 2: http://scifi.stackexchange.com/ http://scifi.stackexchange.com/questions/56142/why-didnt-dumbledore-just-hunt-voldemort-down http://anime.stackexchange.com/ http://scifi.stackexchange.com/questions/5650/how-can-the-doctor-be-poisoned the program compares the 2 lists and creates a single master list with duplicate URLs removed. Now i have a few Backup bookmark folders in Firefox which on occasion i'll bookmark all tabs into a new folder with the date of the backup before i close off tabs or do reset my PC. each folder can have between 1000-2000 bookmarks, sometimes there are a bunch of pages which keep getting bookmarked, ie, i have ~50 pages on the Magical Girl Lyrical Nanoha Wiki on different spells, character and terminology which i commonly look back on. I'd like to know how i can export a bookmark folder so i have a list of URLs similar to what i use in my program

    Read the article

  • Setting up port forwarding for web server

    - by Javier Badia
    This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

    Read the article

  • How can I update generic non-pnp monitor?

    - by njk
    Background I've been running a KVM switch with my monitor at 1920 x 1080 over VGA for over a year. Did a Windows Update on 12/11/12 which did the following: Update for Windows 7 for x64-based Systems (KB2779562) Security Update for Windows 7 for x64-based Systems (KB2779030) Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2761465) Windows Malicious Software Removal Tool x64 - December 2012 (KB890830) Security Update for Windows 7 for x64-based Systems (KB2753842) Security Update for Windows 7 for x64-based Systems (KB2758857) Security Update for Windows 7 for x64-based Systems (KB2770660) After a restart, my extended monitor was dark. I attempted to reset the extended display configuration, and noticed my monitor was being detected as a Generic Non-PnP Monitor: I uninstalled, downloaded new, and re-installed display drivers. Nothing. I attempted to unplug my monitor from the power for 15 minutes. Nothing. I followed some of the suggestions on this thread; specifically DanM's which suggested to create a new *.inf file and replace that in Device Manager. Device Manager said the "best driver software for your device is already installed". The only thing that works is when the monitor is directly attached to the laptop. This obviously is not what I want. My thought is to somehow remove the Generic Non-PnP Monitor from registry. How would I accomplish this and would this help? Any other suggestions? Relevant Hardware ASUS VE276 Monitor TRENDnet 2-Port USB KVM Switch (TK-207K) HP Laptop w/ ATI Radeon HD 4200 Screens

    Read the article

  • mod_fcgi produces random 500 Errors

    - by DmitrySemenov
    php 5.4.7 via mod_fcgi when I run the site sometimes it works, sometimes it crashed with 500 Internal Error, this is what I see in error.log everytime I run the script [Mon Sep 24 18:50:43 2012] [warn] [client 68.231.194.198] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Mon Sep 24 18:50:43 2012] [error] [client 68.231.194.198] Premature end of script headers: api.php any ideas? vhost config: <VirtualHost :80> ServerAdmin [email protected] DocumentRoot "/home/www/sites/test.com/html/development" ServerName test.com ServerAlias www.test.com ErrorLog "/home/www/sites/test.com/logs/error_log" CustomLog "/home/www/sites/test.com/logs/access_log" common <IfModule mod_fcgid.c> <Directory /home/www/sites/test.com/html/development> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/www/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> FcgidMaxRequestLen 1073741824 </VirtualHost> fcgi.d conf LoadModule fcgid_module modules/mod_fcgid.so # Use FastCGI to process .fcg .fcgi & .fpl scripts AddHandler fcgid-script fcg fcgi fpl # Sane place to put sockets and shared memory file FcgidIPCDir /var/run/mod_fcgid FcgidProcessTableFile /var/run/mod_fcgid/fcgid_shm IdleTimeout 300 BusyTimeout 300 ProcessLifeTime 7200 IPCConnectTimeout 300 IPCCommTimeout 7200 PHP_Fix_Pathinfo_Enable 1 php-fcgi-starter.php #!/bin/sh PHP_CGI=/usr/local/php547/bin/php-cgi PHP_INI=/etc/php547-fastcgi.ini export PHP_FCGI_TIMEOUT=1200 #export PHP_FCGI_CHILDREN=6 export PHP_FCGI_MAX_REQUESTS=1000 exec $PHP_CGI -c $PHP_INI

    Read the article

  • Apache Server not working in MAMP

    - by jasonaburton
    Here's what I did before the problem started: I was creating a database for a site that I am working on in phpMyAdmin. I wrote some code to try to connect to the database I just created and I couldn't connect. I assumed it might be because I needed a password to connect to the database, so I created a password for it. Immediately after I created the password phpMyAdmin kicked me out saying: "#1045 - Access denied for user 'root'@'localhost' (using password: YES)" "phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server." I found the php.ini file and searched for where I could change the password to match the one I just made, but couldn't find where I needed to change it. So I decided to scrap the database and uninstall MAMP from my computer and reinstall it hoping it would just reset all the defaults and I could go on my merry way. But now after reinstalling MAMP and trying to run the servers Apache won't start up and I have no idea why. One problem after another... Any advice or helpful ideas?

    Read the article

  • ACER ASPIRE V3-571G-9435 Fan not kicking in leading to overclocking

    - by brythespy
    This laptop has always had this problem. The temperatures kick up to the thermal ceiling of 99C for the CPU (i7-3610QM) and 94C for the GPU (GT 640M). Problem is, the FAN doesn't give a damn. It's actually QUIETER when the temperatures are that high, than when it's at 60C or so. I figured it was a problem with the BIOS, so I updated that, no change. So maybe it was a problem with windows? Nope, same result on gaming with Ubuntu. The major problem of this, is that after gaming for ten minutes the CPU throttles itself to 1197MHz(as opposed to 3193), and the GPU goes down to 135MHz( as opposed to 843MHz). The problem is that the fan won't kick in like I know it can, because when the laptop is in POST, like at BIOS setup, the fan is like a vacuum cleaner it's so loud! I don't really care about noise, so I'd love to have the fan like that all the time as long as the temperatures don't fly through the roof... So, things I've tried so far, to avoid possible duplicate answers. Checked for dust: It's been this way since the laptop was new, and I've since then taken it apart. No dust buildup. Background stuff running?: No, problem persists across OS'es, and it happens while gaming anyways Manually underclocking both CPU/GPU: Using windows, I can force the CPU to stay at 1.1GHz, but the temperature STILL easily hits 99C after 5 min of gaming Contacted Acer support?: No help at all. They told me to update and reset the BIOS, which I have done multiple times. There are only about 6 changeable things anyway, none of which should affect the FAN control Third party fan control program?: None detect the fan So, I'm screwed until I can afford to replace this laptop, but I am very satisfied with performance in games... Whenever the CPU/GPU aren't being throttled. Anyone that can offer advice to solve this problem would be greatly appreciated. Hell, if you solved my problem I'd send you some monies through paypal.

    Read the article

  • Prevent Outlook 2010 Insert Picture resizing image

    - by Rup
    When I "Insert Picture" a JPEG in Outlook 2010 it automatically resizes the image and, I think, recompresses it too. I realise this would be useful for photographs or for people who try to email 1MB BMPs but I would like to email around an image at the original pixel size without recompression. Is there a way to turn this off, or better still choose settings for each image insert? I found this page in the Office help. It's for Word, PowerPoint and Excel not Outlook but points you at File, Options, Advanced, Image Settings. There's no equivalent section in Outlook. I know Outlook uses Word as its editor so I've looked at Word's settings but there isn't an 'original size' here: there's only 'turn off image recompression' and pick target DPI from 96, 150, 220. I guess Office is finding a DPI value in the JPEG file and scaling it up or down to match this setting. I can't find an equivalent option in Outlook's options menu but there's so many settings and pop-up dialogs I may have missed something. Picture Format, Reset image size resets the image to the rescaled version, not the original. I can't see a way to edit a pixel value into size values in the image properties after insert. Thanks! I realise I can probably achieve this by editing the image metadata in PhotoShop elements or similar but there ought to be a way without editing the file? This is new behaviour in Outlook 2010; 2007 didn't do this.

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • Win 7 x64 explorer.exe stops responding on copy/paste

    - by Sourabh
    Few months ago I changed my Win7 orb using this software. But it changed only the explorer.exe in C:\Windows. To solve that, I copied explorer.exe from there to C:\Windows\system32 and C:\Windows\SysWOW64 (Probably a bad idea). Things were working fine until a few days ago, it started giving me problems while copying. Sometimes, when I copy/paste, It works fine but sometimes it stays on that dialog box which looks like it is doing pre-copying things like counting number of files/file size etc. But its not. It stays on that screen forever. Now if I try to close it, title changes to cancelling but rest stays the same. If I try to close it too many times, explorer.exe crashes. And its not related to file-size. It may crash for 4Mb file and work fine for 10Gb file but some other time, it'll do the opposite. Is there any way to reset my explorer.exe and Is this because of explorer.exe or something else PS: I forgot to take backup of explorer.exe. PS2: I didn't install any software or downloaded anything that could harm my computer. EDIT I tried System Restore and SFC /scannow but they didn't help.

    Read the article

  • HP dv6910 laptop no longer recognizes wireless adapter, dvd drive, and one usb port. What can I do about this?

    - by Joan H.
    In the last 3 weeks, my not even 3 year old HP laptop (vista) just seems to be failing. First, one of the usb ports stopped working. Next, the dvd drive all of a sudden was not recognized as even existing, so it is now useless. And as of today, I no longer seem to have a wireless adapter on my laptop. It doesn't show up in device manager, same as the dvd drive. I can connect to the internet by ethernet cable, but not wirelessly. It worked fine last night; now it doesn't even exist! I have tried a 'hard reset' I read about on HP's forum- no help. I am not sure what else to try. I read about the USB wifi dongle in another response, but I already have maxed our my usb ports even though I have bought a USB hub since the one port failed. Plus, I'd like my laptop to just work like it's supposed to instead of being jerry rigged with usb hubs, external dvd drives, and wifi dongles etc. Any ideas?

    Read the article

  • Want to send my neighbors to a certain website via DNS, but don't have a clue how. [closed]

    - by Akku
    My neighbors have an unsecured WIFI router, and over the administration web-UI of the router I could log in as there was no password set. I don't know which of my neighbors these are, and I'd like to configure their router in a way that they come to my website instead of Google and Facebook, where I set up a warning in german. It this page: http://www.abelssoft.de/liebenachbarn/ Basically, I just want to see if and how this is possible - I'm aware that I could just set the WiFi-password and have them call their network provider to reset the thing, but I really want to see if this could work, because it would be a way cooler effect :-). So this router interface doesn't allow custom redirects, only filters. BUT I can set the DNS that is used, so I thought there might be the possibility to set up a custom DNS on a server, set it as the main DNS and redirect from Google to the URL above. Is this possible? If so, please try to detail a way that I have to go though to achive this. Note that I'm not the super-Linux-skilled person, I have a dyndns account and a Windows machine it points to as well as an Apache+Tomcat if that helps. I could also set up virtual machines on the windows server and redirect to those using a different port. Or is there maybe a webservice that provides such custom DNS?

    Read the article

  • Time Machine is getting stuck at "Preparing to Back Up" and my Trash isn't emptying

    - by zarose
    I have encountered two separate problems, but I am putting them in the same question in case they are related. First, my Trash would not empty. It seems to be getting stuck on certain files, because I will reset my Macbook and some of the files will be deleted, and then if I remove a file or two at random, more can be deleted. Some of these files had strange characters in their names. I tried changing the names to single characters, but this did not help. Next, I attempted to backup my Macbook using Time Machine. I plugged in the HDD I've been using for this, but every time I try to start the backup, Time Machine gets stuck at "Preparing to Back Up". I definitely need to know how to fix the Time Machine problem, but I am curious how to solve the trash problem as well, and whether or not these problems are related. EDIT: Console.app logged the following this morning before I left on a trip. I did not bring the HDD with me. 6/5/12 7:41:28.312 AM com.apple.backupd: Starting standard backup 6/5/12 7:41:46.877 AM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 7:41:58.368 AM com.apple.backupd: Backup failed with error: 19 6/5/12 7:59:08.999 AM com.apple.backupd: Starting standard backup 6/5/12 7:59:10.187 AM com.apple.backupd: Backing up to: /Volumes/Seagate 3TB Mac/Backups.backupdb 6/5/12 7:59:13.308 AM com.apple.backupd: Event store UUIDs don't match for volume: Macintosh HD 6/5/12 7:59:13.331 AM com.apple.backupd: Event store UUIDs don't match for volume: Blank 6/5/12 7:59:13.683 AM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|new event db| 6/5/12 8:23:31.807 AM com.apple.backupd: Backup canceled. 6/5/12 8:23:33.373 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected. 6/5/12 9:51:21.572 PM com.apple.backupd: Starting standard backup 6/5/12 9:51:22.515 PM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 9:51:32.741 PM com.apple.backupd: Backup failed with error: 19

    Read the article

  • Internet in the router but not in the local network.

    - by TheMouse
    I have a PC and a laptop (Windows 7 - both) which should connect through router to Internet. The router is Linksys wrt120. My ISP is using PPPoE. I have connected the Internet cable to the router, clone the MAC of my PC, writing the username and the password for my Internet connection. After seconds the router has acquired IP from my ISP. I have used the administration panel of Linksys and with the help of the ping and tracert commands which are built into it - I can connect to the world, outside the network. The problem is when I try to connect the PC or the laptop to the network. There's no problem here. The DHCP server of the router gives them appropriate addresses. The problem is that they couldn't connect to either Internet addresses (google.com) or IP addresses. But they can connect to the router and its control panel. I tried several times, reset the router..but there's no Internet..still.

    Read the article

  • Compaq Motherboard gives "CPU Fan Error"

    - by John
    I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

    Read the article

  • Hard Drive Compatibility with Motherboard

    - by Wesley
    Here are the current specs to put things in context: ECS P4VXASD2+ V5.0 Intel Pentium 4 Northwood 2.8 GHz 2x 512MB PC2100 DDR266 SDRAM Maxtor DiamondMax 10 250 GB PATA (IDE) HDD Gigabyte 52x CD-ROM NVIDIA TNT2 Pro 16 MB OKIA 300W ATX PSU USB bracket Modem PCI Before, I actually had a 300 GB hard drive installed. However, I read the FAQ for the motherboard and discovered that a maximum of 250 GB hard drive was supported. So I ended up finding the one listed above and put that in. However, upon booting up, I reset the BIOS to defaults and auto-detected all the drives installed. The 250 GB came up as something like 251.0 GB. I didn't think much about it until I tried to boot up a Windows XP installation disc. It booted up successfully and run for about a minute before the computer randomly rebooted. I've made sure that all the jumpers and settings are correct and everything has been installed correctly. I've tried running it without the addons and one stick of RAM but still the same thing. What else could be causing this problem?

    Read the article

  • can't connect 2 subnets through RRAS 2008 r2

    - by mcdwight6
    I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

    Read the article

  • Mac, VNC and multiple monitors

    - by MarqueIV
    I asked a similar question here before but apparently I wasn't as clear as I had expected by the responses. That said, I'll try again. I have a Mac Pro with quad monitors which I would like to access remotely. I've been using VNC for this (either via screen sharing or a dedicated VNC client), which works, but the VNC protocol matches the physical layout/resolutions of attached monitors. One of the things I like about Microsoft's Remote Desktop (Terminal Server) client is that when you connect, it blanks out the local screens and sets the resolution to a client-specified setting. In other words, when natively running Windows, even though I'm running a physical 30" monitor flanked by 2 24" monitors as well as a 21" Cintiq monitor, I can set the Remote Desktop resolution to match my notebook's screen giving me a native, single-monitor configuration. As soon as I disconnect (and you log back in locally), the desktop un-blanks and the resolution resets back to the four physically attached monitors. Again, VNC works and yes I know I can use 5901, 5902...n to attach VNC to a specific monitor as opposed to the entire desktop, but I'm still at the mercy of trying to look at a 2560x1600 resolution on a 1280x800 screen. I'm left with either scaling (everything's too small) or panning/scrolling (it's like playing hide-and-seek with your documents!) SO... anyone know of any Mac-based remote software (client and server) that will let me connect to my Mac Pro and reset the resolution by the client, just like you can in Windows, or am I SOL?

    Read the article

  • Slow browsing through IE on Windows Server 2012

    - by Volodymyr
    We've run into strange issue on the freshly installed servers. H/W: IBM server X3550 M4 7914; OS: Windows Server 2012 Std. Then we try to browse on the servers thru IE, not all sites are opened or it takes too long time to open the page, i.e. very few of them can be opened. Local FW are disabled. Servers are in a new subnet and traffic is allowed for it. VLAN is configured properly Another Windows Server 2012 host is running OK and Internet access works fine, but it is VM running on Hyper-V 2012. No proxy is used on the network. At the same time, if one tries to establish telnet session to any site on 80/443 ports - it does work. Google works as well. I've tried to configure single Qlogic adapter to check if the issue remains - it does. Teaming is configured with the means of QLogic, not by built-in functionality. IE Enhanced Security is disabled. IE settings were reset, more than once. Why would certain sites work while others not - Idk. I also tried to disable ecncapability and restart server - no luck netsh int tcp set global ecncapability=disabled Any thoughts? UPD1 VMQ is disabled. Servers are not running Hyper-V. UPD2 Servers were rebuilt from scratch, got a mail a few mins ago. Issue still remains. Teaming is now configured with the means of Windows Server 2012.

    Read the article

  • Mac OS X in Virtualbox says "You need to restart your computer"

    - by humoeba
    I've been trying to figure out for the past week how to get Snow Leopard reliably running in a VM. Right now I am using VirtualBox, and it runs fine for a while, but every once in a while (happened 3 times in the last few hours) I get the "You need to restart your computer" message. Unfortunately, it hasn't even lasted long enough to finish installing the operating system yet. I first tried VMWare, which was a pain to set up. I got it running ok, operating system installed, with the guest tools. Every once in a while though, it just stops running. I click inside the VM, and there's no mouse. It doesn't respond to keyboard input either. I have to reset the VM to get a response. I'm wondering if this is the same error. This happens with both Workstation and Player. Here is the tutorial I used for VirtualBox: http://www.sysprobs.com/iboot-loader-virtualbox-install-snow-leopard Here's the tutorial I used for VMWare: http://bobhood.wordpress.com/2009/12/18/welcome-to-snow-leopard-mac-os-x-10-6-and-vmware-workstation-7/ I'm using an iso for Mac OS X 10.6.3. I have an HP Pavilion dm4 with an Intel Core i7 M640 running Windows 7; VT is turned on. Using VirtualBox 4.0.4 and VMWare Workstation 7.0.1 and VMWare Player 3.0.1 Does anyone know what might be causing this error or how I can fix it? Thanks.

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

  • All network devices freezing when Airport Extreme Base Station is connected. Any ideas?

    - by Jon
    I've been troubleshooting this issue for a while, and through a series of events have it narrowed down to my airport extreme base station. I like this router, since I'm able to connect to IPV6 sites without any insane configuration (my alternate router is too old and doesn't support v6). My question is: Has anyone else had this issue, if so how is it resolved? If not, can you recommend a good IPv6 router? Here is how I came to the conclusion that it is the router: Devices: XBOX 360, HTC Incredible, Home-Built machine running FreeBSD, Home-Built machine running Ubuntu 10.04. 1.) Noticed freezing on Ubuntu Box. 2.) Noticed freezing on XBOX360 3.) Noticed freezing on HTC Incredible (only when connected to my network wirelessly). The above all happened at random times throughout the past few weeks. Over the last few days, I was playing XBOX and noticed that the XBOX and Ubuntu machines both froze. I picked up my phone, and it was also frozen. I reset all devices, power-cycled my router, and all was fine again. About two hours later, it happened again (I was playing Forza III, the XBOX froze; I went to the Ubuntu box and it was frozen; unfortunately, the HTC phone was not connected wirelessly, and the FreeBSD box was turned off). I can't even begin to imaging what a router could be doing to freeze devices with such differing hardware/software/OS, and I feel absurd for coming to this conclusion, but I have nothing else. I hooked up my archaic Netgear router, and have had no problems since. :(

    Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >