Search Results

Search found 1880 results on 76 pages for 'alone'.

Page 47/76 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• Need an expert advice on *X display manager, window manager and composit manager combination

  - by fakemustache

  Hello! I have fought with myself whether or not i should ask this question but I find myself stuck and I need another expert opinion. I can't seem find the right combination of display and window manager (and composit manager). I have tried so many different combinations but most of them don't work for me. I have been working with Linux for a few years now and currently I'm running Gentoo with GDM, Openbox(stand alone, Gnome aware) and xcompmgr. But I have tried Metacity, Awesome and Fluxbox with and without Compiz, but always with GDM. What I want: A lightweight, HIGHLY configurable environment that doesn't rely on mouse-input too much (except for web browsing and image processing). At 95% I work with multiple consoles and desktops on multiple screens. What makes me ask is that most lightweight environments seem somewhat "unfinished" and show unexpected behavior quite often. And of course I want an environment that's not TOO ugly to look at as I use it at an average of 10 hours a day. :) Any thoughts? What do you use in a similar situation? Thanks for any advice! (Please excuse my english as I'm from Germany, btw greetings from Berlin ;)))

  Read the article

• Windows 2008 Server cannot access any network share

  - by Ramesh

  Hello friends I run a Windows 2008 server with SP2. This server acts as a desktop alone. Recently, I switched between two networks (corporate and other) using this system. Ever since, I am unable to access any network share on the original network from where I installed and configured the desktop. The message I get is "Network path was not found". Note that I am able to access the internet and my corporate mail server. I am told this is a Vista and Windows 2008 specific problem and I have done everything I could think of: a) Deleted the second network settings from the desktop b) Installed a patch from MS that supposed took care of this problem (with MS clearly saying they had not tested this enough) c) The SP2 install was after the problem occurred and I went ahead with it in the hope that SP2 may have something that would fix this Some additional details: a) A system admin can log into this system from a remote terminal b) I cannot get into my own system using the hidden share C$ - for instance \mymachine\C$ gives me the same message as above - Network path not found c) I can log into my system remotely using mstsc d) I cannot create shares on this system - as an extension network printers are not detected I have an update for you: The error message is as follows - **Network Error** Windows cannot access \\network_share Check the spelling of the name. Otherwise there might a problem with your network. To try to identify and resolve network problems, click Diagnose. Clicking Diagnose gives Error Code: 0x80070035 The network path was not found. Any help will be appreciated Thanks

  Read the article

• Apache reaching MaxClients and locking the server

  - by Rodrigo Sieiro

  Hi. I currently have an Apache2 server running with mpm-prefork and mod_php on a OpenVZ VPS with 512M real / 1024M burstable RAM (no swap). After running some tests, I found that the maximum process size Apache gets is 23M, so I've set MaxClients to 25 (23M x 25 = 575 MB, ok for me). I decided to run some load tests on my server, and the results left me puzzled. I'm using ab on my desktop machine requesting the main page from a wordpress blog. When I run ab with 24 concurrent connections, everything seems fine. Sure, CPU goes up, free RAM goes down, and the result is about 2-3s response time per request. But if I run ab with 25 concurrent connections (my server limit), Apache just hangs after a couple of seconds. It starts processing the requests, then it stops responding, CPU goes back to 100% idle and ab times out. Apache log says it reached MaxClients. When this happens, Apache keeps itself locked up with 25 running processes (they're all in "W" if I check server status) and only after the TimeOut setting the processes start to die and the server starts responding again (in my case it's set to 45). My question: is that expected behaviour? Why Apache just dies when it reaches MaxClients? If it works with 24 connections, shouldn't it work with 25, just taking maybe more time to respond each request and queueing up the rest? It sounds kinda strange to me that any kid running ab can alone kill a webserver just by setting the concurrent connections to the servers MaxClients.

  Read the article

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• Apache MaxClients reaching max and locking the server

  - by Rodrigo Sieiro

  Hi. I currently have an Apache2 server running with mpm-prefork and mod_php on a OpenVZ VPS with 512M real / 1024M burstable RAM (no swap). After running some tests, I found that the maximum process size Apache gets is 23M, so I've set MaxClients to 25 (23M x 25 = 575 MB, ok for me). I decided to run some load tests on my server, and the results left me puzzled. I'm using ab on my desktop machine requesting the main page from a wordpress blog. When I run ab with 24 concurrent connections, everything seems fine. Sure, CPU goes up, free RAM goes down, and the result is about 2-3s response time per request. But if I run ab with 25 concurrent connections (my server limit), Apache just hangs after a couple of seconds. It starts processing the requests, then it stops responding, CPU goes back to 100% idle and ab times out. Apache log says it reached MaxClients. When this happens, Apache keeps itself locked up with 25 running processes (they're all in "W" if I check server status) and only after the TimeOut setting the processes start to die and the server starts responding again (in my case it's set to 45). My question: is that expected behaviour? Why Apache just dies when it reaches MaxClients? If it works with 24 connections, shouldn't it work with 25, just taking maybe more time to respond each request and queueing up the rest? It sounds kinda strange to me that any kid running ab can alone kill a webserver just by setting the concurrent connections to the servers MaxClients.

  Read the article

• Need a new mouse: clicky scroll wheel and additional thumb-operated scroll wheel

  - by cksubs

  I'm having some carpel tunnel syndrome or RSI issues, and I need to get a new mouse. I've tried a friend's Logitech MX Revolution and it's almost perfect. I LOVE the thumb-operated scroll wheel, and I think that that alone would solve many of my hand pain issues. The problem is that it uses their newfangled smooth/click scroll wheel. It can be either smooth or clicky, and is switched by pressing in the scroll wheel. I really question Logitech's user research on that one. I've been using middle-click to open new links and close tabs for years now in my browser, and I'm not willing to give that up for this cool technology. In fact I HATE smooth scroll wheels in general, and need a clicky one. The option would be ok, but not if it's activated via the middle-click button. In closing, I'm looking for these items in my mouse: Thumb-operated scroll wheel or 'joystick'-like apparatus. Clicky, as-stiff-as-possible scroll wheel on top Normal middle-click functionality. Comfortable, preferably ergonomic design. Anyone have any suggestions? Logitech, want to get rid of that smoothing-scrolling crap so I can buy your mouse?

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• Prevent Cisco VPN from interrupting home networking

  - by jkohlhepp

  I just got a new laptop, and for the most part have left its settings alone. Today I was trying to get some sharing going between my desktop and the laptop. Both machines are connected to the same wireless network and both machines consider that network to be a Home network. Both are running Win7 Home Premium. It seems like my laptop is aware of my desktop on the network. It can ping it by IP or by computer name. When I go to Network from the laptop, I can see the desktop in the list of computers. However, my desktop cannot ping the laptop, nor can it see it within Network. My desktop has a Homegroup set up, but my laptop says "There is currently no homegroup on the network". I do have network discovery turned on for both machines. Why can my desktop not "talk" to my laptop but it works the other way around? Update: Disabling the Windows Firewall on the laptop somewhat fixes the problem. With it disabled, my desktop can ping my laptop, but still my laptop can't see the homegroup. Also, it can ping via hostname, which resolves to IPv6, but can't ping via the IPv4 address. Obviously I'd rather not leave my firewall disabled, so I need a more specific fix. Update 2: Aha! It is the Cisco VPN software I was running to connect to work computers. Once I disconnected and exited from that, the two PCs seemed to be talking normally and the homegroup was visible to the laptop. So now my question has morphed: how can I prevent Cisco VPN from interrupting my home networking?

  Read the article

• Will this increase my Virtual private Server failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

  Read the article

• Selenium server causes crazy load on server - how to prevent?

  - by Eric

  I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

  Read the article

• IIS rewrite rule to check for querystring and add it if its not there

  - by M.R.

  I'm trying to make a IIS URL rewrite rule that appends an URL parameter to the URL. The url parameter is hssc. So, any url that is processed through the server, needs that parameter. Keeping in mind that some urls will have their own params already, and other urls won't, and root urls, etc, sometimes it will need to add ?hssc=1 or &hssc= - so, if I have a URL that is as such: http://www.blah.com should become http://www.blah.com/?hssc=1 http://www.blah.com/index.html should become http://www.blah.com/index.html?hssc=1 http://www.blah.com/?q=5 should become http://www.blah.com/q=5&hssc=1 http://www.blah.com/index.html?q=5 should become http://www.blah.com/index.html?q=5&hssc=1 http://www.blah.com/index.html?q=5&hssc=1 should be left alone I also want it that the URL should not be hidden (as in a backend rewrite behind the scenes). I need the URL to appear in the URL, so when users copy the URL, or bookmark it, the parameter is there. I've set the condition to match it \&hssc|\?hssc - now I just need a way to write the URL, so it appears and keeps the part of the original URL that is already there.

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• iptables (NAT/PAT) setup for SSH & Samba

  - by IanVaughan

  I need to access a Linux box via SSH & Samba that is hidden/connected behind another one. Setup :- A switch B C |----| |---| |----| |----| |eth0|----| |----|eth0| | | |----| |---| |eth1|----|eth1| |----| |----| Eg, SSH/Samba from A to C How does one go about this? I was thinking that it cannot be done via IP alone? Or can it? Could B say "hi on eth0, if your looking for 192.168.0.2, its here on eth1"? Is this NAT? This is a large private network, so what about if another PC has that IP?! More likely it would be PAT? A would say "hi 192.168.109.15:1234" B would say "hi on eth0, traffic for port 1234 goes on here eth1" How could that be done? And would the SSH/Samba demons see the correct packet header info and work?? IP info :- A - eth0 - 192.168.109.2 B - eth0 - 192.168.109.15 - eth1 - 192.168.0.1 C - eth1 - 192.168.0.2 A, B & C are RHEL (RedHat) But Windows computers can be connected to the switch. I configured the 192.168.0.* IPs, they are changeable. Any help?

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• Upgrading from SQL2000 database to SQL Express 2008 R2

  - by itwb

  Hi, We have a web application which uses a MSSQL 2000 backend database. We are currently paying a ridiculous amount for Shared Hosting, with the database costs alone costing us $150 per month (MSSQL 100mb extra space is $40 per month). Our database size is 896.38 MB I am looking at getting a Virtual Private Server and upgrading the database to a MSSQL2008 Express database. I am aware that the Express version is limited to a 10GB database (with R2), and is constrained to a single CPU. I have also been offered SQL Server 2008 Web Edition for $19/per month, but I cannot find many details on the difference between Express and Web. Any suggestions here? What I would also like to know is: If we upgrade the database to MSSQL 2008 database, is there any issues with possible data transformations in the future? I.e. Is it possible to download and mount it with SQL Server 2008 Standard edition? I'm more concerned about how to get data in and out of the database through SQL Management tools. Are there any other issues that I might face? Thanks, Mike

  Read the article

• Is On-The-Fly string replacement possible using GreaseMonkey and Firefox

  - by Gary M. Mugford

  I have looked for means to stop Brightcove videos from autostarting in Firefox and have come to the conclusion it isn't possible without external programming via something like Grease Monkey. However, I'm not proficient in javascript let alone GM. So I thought I'd ask here first whether what I want to do is feasible, or whether it's a fool's errand. What I want to accomplish is have a site specific script executed to replace a string value on the run in that site's code. Specifically, what I am looking for is something GM-style that would do this: if site_domain = 'www.SiteWithAutoPlayVideos.com' then replace_all('<param name="autoStart" value="true" />', '<param name="autoStart" value="false" />'); Having looked through Super User for anything GreaseMonkey that might relate, I see notices that the sandbox GM executes scripts in has to remain separate for security reasons. So, I suspect I might be in for disappointment. BUT if it is accomplishable and somebody here can confirm it, then I will do my best to struggle through the learning curve and get this noisome little problem put to rest. Yes, I have tried Flash Block and FlashDisable in order to attack this issue with no avail. Thanks in advance for your time.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• Changing the interface language in Windows 7 Home Premium

  - by Cristián Romo

  A friend of mine has recently purchased a laptop in the U.S. that has Windows 7 Home Premium on it with an English interface. Not being a native English speaker, I'm trying to change the interface language to traditional Chinese. I've looked through the Control Panel in search of something that might let me change the interface language. Naturally, I looked at the Region and Language section and managed to change the formats the computer uses and install a working keyboard, but I haven't found a way to change the interface language. Upon doing some research, I found out that there are two kinds of interface packs, Multilingual User Interface (MUI) and Language Interface Packs (LIP). It seems that MUIs can only be installed through Windows Update, so I looked through the list of updates. To my dismay, the language packs are not present. The optional updates tab doesn't even show up. Many sites show a drop down menu the under Keyboards and Languages tab in the Region and Language options, yet it doesn't show up for me. We also don't have the Windows 7 DVD which might contain this useful file. As far as the LIPs go, I can't find one in Chinese at all, let alone traditional Chinese. Can the interface language be changed in Home Premium at all? If it can, how would I do so?

  Read the article

• Googlebot repeatedly looks for files that aren't on my server

  - by John at CashCommons

  I'm hosting a site for a volunteer organization. I've moved the site to WordPress, but it wasn't always that way. I suspect at one point it was hacked badly. My Apache error log file has grown to 122 kB in just the past 18 hours. The large majority of the errors logged are of this form -- it's repeated hundreds of times today alone in my log files: [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/calendar.php [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/404.shtml (I verified that xx.xxx.xx.xxx was a Google server.) I suspect there was a security hole somewhere before, likely in calendar.php, that was exploited. The files don't exist anymore, but there may be many backlinks that exist that reference here, hence why googlebot is so interested in crawling them. How do I fix this gracefully? I still would like Google to index the site. I just want to tell it somehow not to look for these files anymore.

  Read the article

• How to configure TFTPD32 to ignore non PXE DHCP requests?

  - by Ingmar Hupp

  I want to give our Windows guy a way of easily PXE booting machines for deployment by plugging his laptop into one of our site networks. I've set up a TFTPD32 configuration which does just that, and our normal DHCP server ignores the PXE DHCP requests due to them having some magic flag, so this part works as desired. However I'm not sure how to configure TFTPD32 to only respond to PXE DHCP requests (the ones with the magic flag) and ignore all normal DHCP requests (so that the production machines don't get a non-routed address from the PXE server). How do I configured TFTPD32 to ignore these non-PXE DHCP requests? Or if it can't, is there another equally easy to use piece of software that he can run on his Windows laptop? Since the TFTPD part is working fine, a DHCP server with the ability to serve PXE only would do. Worst case I'll have to set up a virtual machine with all this, but I'd much prefer a small, simple solution. I'm not interested in solutions that involve using the existing DHCP servers or separating machines on the network for deployment, the whole point is to be simple and stand-alone.

  Read the article

• Solaris SMF to Upstart on RHEL6

  - by aaa90210

  I am planning a migration from Solaris/x86 to RHEL6. Part of this migration will be migrating services from SMF to the RHEL6 equivalent, which appears to be upstart. While init.d scripts still seem to be supported, I want to take advantage of a more sophisticated init daemon, especially for features like job supervision (restarting etc). I would like to gather some thoughts on a few points: 1) Is upstart an adequate job supervisor, i.e. does it preclude the need for stand-alone managers like daemontools/supervise? 2) Upstart scripts seem very bare-bones compared to a typical init.d script. If I was porting an init.d script to Upstart, is it OK to just "exec /etc/init.d/myjob start"? This include RHEL installed programs like httpd. 3) Does upstart do anything is regards to pid files, and what are it's expectations in regards to the forking model of the process? 4) Are there any straightforward guides to the process management aspect of Upstart...and by that I mean the conditions around controlling restarting? e.g. how many times to restart the process before it goes into a maintenance state, or to ignore errors/core dumps in child processes of the supervised process. Any other relevant ideas or guides would be appreciated. TIA

  Read the article

• Why have trackballs almost disappeared? [closed]

  - by Gary M. Mugford

  One of the movement sensors in my Microsoft Trackball Explorer has failed and right now I am using a mouse. Ugggh! I'll got steal one of the various Logitech trackballs spread around the house, but they all have issues. The Trackman has a horrible placement for the scroll wheel. Others have marbles for the thumb rather than a big ball for the fingers and at least one trackball is working around here without having a scroll wheel at all! (The one at the dinner table, for when I dine alone). My question is, why have trackballs fallen into disfavour? Seems to me that trackballs are great for crowded desktops (you know, the one with keyboards, notes, pens and coffee cups), and for laptops with those hated overly-sensitive touchpads. But right now, it seems to be a choice between that Logitech Trackman and some Kensington models that lack scroll wheels. All I want is a nice big ball to manipulate with the fingers and two buttons on the thumb side with the scroil wheel between them. Placement of other buttons is completely optional. Is that asking too much?

  Read the article

• "The zone can be scavenged after" keeps incrementing

  - by kce

  What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

  Read the article

• Upgrading memory on an IBM Power 710 Express (8231-E2B)

  - by cairnz

  We have a Power 710 Express server that was loaded with 4x4 GB memory on a single riser card. I have replaced the 4 chips with 4x8GB and put in another riser card and loaded it with 4x8GB more for a total of 64GB memory. The firmware is AL730_078. When i power it on, the service processor boots up and i can access the ASMi. From here I can look at "Memory Serial Presence Data" and see that the system in some way detects 8x8 GB. However when i look at Hardware Deconfiguration and specifically Memory Deconfiguration, it is still listed with old values, 16384MB, and claims there are 4x4 chips in the C17 riser. How do i proceed to make the server recognize properly the amount of memory installed? I get a FSPSP04 and B181B50F progress code on booting because (i think) it hasn't been told the memory has changed. It then does not proceed to booting the operating system (VIOS) when turned on. Are there any steps I have overlooked here? Can I do some commands, either on the service processor, or otherwise, to tell the system to configure with the proper amount of memory? PS: This is a stand alone server, not configured with HMC or SDMC.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >