Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 47/491 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Cannot create zpool, how to get rid of intel raid volume?

  - by nagylzs

  This is a FreeBSD 9.1 amd64 computer. It has 5 disks installed. The ada0 and ada1 disks are used with a hw raid to provide the root filesystem: root@gw:/home/gandalf # ls /dev | grep ada ada0 ada1 ada2 ada3 ada4 root@gw:/home/gandalf # zpool status pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raid/r0s1a ONLINE 0 0 0 errors: No known data errors I want to create a raidz pool for the remaining disks: root@gw:/home/gandalf # zpool create -f data raidz1 ada2 ada3 ada4 cannot create 'data': one or more devices is currently unavailable root@gw:/home/gandalf # dmesg | grep ada2 ada2 at ata4 bus 0 scbus6 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad16 root@gw:/home/gandalf # dmesg | grep ada3 ada3 at ata5 bus 0 scbus7 target 0 lun 0 ada3: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad18 GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. root@gw:/home/gandalf # dmesg | grep ada4 ada4 at ata6 bus 0 scbus8 target 0 lun 0 ada4: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad20 root@gw:/home/gandalf # dmesg | grep GEOM_RAID Aha, so ada3 is already part of another raid volume? Let's see: root@gw:/home/gandalf # dmesg | grep GEOM_RAID GEOM_RAID: SiI-130628113902: Array SiI-130628113902 created. GEOM_RAID: SiI-130628113902: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Array started. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from STALE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from STALE to RESYNC. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 rebuild start at 0. GEOM_RAID: SiI-130628113902: Volume SiI Raid1 Set state changed from STARTING to SUBOPTIMAL. GEOM_RAID: SiI-130628113902: Provider raid/r0 for volume SiI Raid1 Set created. GEOM_RAID: Intel-fb8732fa: Array Intel-fb8732fa created. GEOM_RAID: Intel-fb8732fa: Force array start due to timeout. GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Array started. GEOM_RAID: Intel-fb8732fa: Volume Volume0 state changed from STARTING to DEGRADED. GEOM_RAID: Intel-fb8732fa: Provider raid/r1 for volume Volume0 created. root@gw:/home/gandalf # Yes, indeed. I want to get rid of raid/r1 completely. However, the controller was already set to "IDE" mode in the BIOS. So why it is creating a raid volume??? I have also tried overwritting the first 16k data of ada3 and reboot the computer, but it did not help. How can I delete /dev/raid/r1 ? root@gw:/home/gandalf # graid status Name Status Components raid/r0 SUBOPTIMAL ada0 (ACTIVE (RESYNC 4%)) ada1 (ACTIVE (ACTIVE)) raid/r1 DEGRADED ada3 (ACTIVE (ACTIVE)) root@gw:/home/gandalf # graid delete raid/r1 graid: Array 'raid/r1' not found. root@gw:/home/gandalf # graid delete /dev/raid/r1 graid: Array '/dev/raid/r1' not found. root@gw:/home/gandalf # Thanks

  Read the article

• What is an intel I3 core?

  - by vaccano

  I know that a Dual Core is generally worse than a Core 2 Duo. Where does an I3 core fit into that? Does it have a dual core? Is it better or worse or just confusing?

  Read the article

• Bridging a non-persistent PPP connection to wireless (or wired) in Windows XP

  - by phooze

  I have a 3G modem-like device (eMobile's D01NX, PC card style, for any Japan nerds out there) that I use to connect my PC to the Internet. I'd like to bridge this connection with another computer either via an ad-hoc wireless network, or a simple cross-over cable (either are options). However, when I open "Network Connections", I do not see the PPP connection (otherwise I could click both and bridge). I believe this is because there is software (provided by the vendor) that is handling the card directly and registering a PPP connection dynamically. When connected, an ipconfig at the command line yields: Ethernet adapter wireless: Connection-specific DNS Suffix . : Autoconfiguration IP Address. . . : 169.254.5.169 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter lan: Media State . . . . . . . . . . . : Media disconnected PPP adapter {B59EEDDE-A22B-48DF-93E5-04842B641257}: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 114.xx.xxx.xx Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 114.xx.xxx.xx (I've commented out my IP address for privacy reasons, but what does appear there is a functional Internet IP address.) When I disconnect the adapter with the vendor software, the PPP connection disappears completely from the ipconfig list. Any ideas on how to do this?

  Read the article

• Can't ping other machines in my network

  - by judahgabriel

  I've got 3 machines on my network, all running Windows 7. None of them can ping each other, can't see each other on the network, can't see shares, can't remote desktop, can't see any homegroups. They are all on the same workgroup. They are all connected to the same wireless, WPA2 secured network. They all worked together nicely until I added a password to my wireless network. After that, and after reconnecting all the machines to the password-protected network, they can't see each other. Any ideas what could be wrong?

  Read the article

• logitech unifying receiver

  - by Plastkort

  hi! I am having multiple logitech devices, and each and one of them seem to have theire own receiver, occupying USB ports.. I read upon Logitech unifying receiver, and it seem to connect multiple wireless devices from logitech, however I wonder if I just buy this one receiver, will I be able to connect my existing wireless devices, or will I be forced to buy new keyboard and mouse in order to use the unifying receiver? hope anyone here have the answer so I dont need to spend money on something I cannot use.. :) I got PC 1 Logitech Dinovo Edge keyboard Logitech MX Air mouse PC 2 Logitech Dinovo Keyboard Logitech VX mouse

  Read the article

• What is an Intel Core i3?

  - by vaccano

  I know that a Dual Core is generally worse than a Core 2 Duo. Where does a Core i3 fit into that? Does it have dual cores? Is it better or worse or just confusing?

  Read the article

• Intel GMA 965 M - OpenGL missing

  - by pestaa

  I have a Lenovo 3000 N200 notebook with integrated GMA 965 VGA, using Windows 7. All my drivers are up to date, downloaded directly from the vendor site, installed with administrative privileges, etc. Yet, all OpenGL applications cannot render the interface (or any visuals). Examples are Blender (3D modeling software) and Babo Violent (top-down FPS). All the controls, sound effects and music are live, but the screen is black or light gray, respectively. What can one do?

  Read the article

• Wifilink 5100 AGN mass update

  - by ripwads

  We are using a Meru enterprise wireless network with 180 APs. Recently, many users connections are dropping frequently. After much troubleshooting, we have determined much of the trouble is due to some settings in the advanced properties of the wireless nic on our notebooks. Now we want to send out the changes in a Zenworks bundle, but I cannot find these settings in the registry or anywhere we might be able to send out as a remote package. Does anyone know where to find these settings for an Intel wifilink 5100 card other that the NIC properties itself? We really do not want to manually configure 600 notebooks.

  Read the article

• Intel T5600 to upgrade T5250

  - by galets

  I want to upgrade my laptop which has T5250 CPU with a T5600 CPU to support virtualization. I ordered T5600 on ebay, but it didn't fit. It says T5250 supports PPGA478 socket, so I assume that is what I have. T5600 says supports "PBGA479, PPGA478". Since T5600 didn't fit as a replacement, I assume it means there are 2 models of T5600, one supports PBGA479, another one supports PPGA478, and not like I thought - one CPU supports both. Is that a correct statement? Does anybody know if it's even possible to do such an upgrade, or I'm wasting time?

  Read the article

• My Router is fast when i reset it but slows down seconds later

  - by hglocke

  I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

  Read the article

• Some explaination on WLAN adaptor antennas and radios

  - by gert_78

  We have a desktop in a room where the is no wired connection that has bad reception from the wireless AP. Someone (I don't remember who of course) told me there are high gain antennas that will make it possible to get a better reception (and throughput). I believe he said they are adaptors with "high gain" antennas. He also told me he uses it in hotels when he has a bad WLAN reception. When he connects that card the reception and speed is a lot better all of a sudden. But can someone explain me in understandable language what that is and what the thing with high gain, dB, dBi and mW is all about please? What type of card do we need? On like this or this?

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• no volume in kubuntu 10.04

  - by neha

  hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• How to specify Wireless or Bluetooth in GameKit when using my own custom interface

  - by DonnaLea

  Hi, I've decided to implement my own interface for connecting two devices running my game, as opposed to using the GKPeerPickerController. This is actually working quite well. But I just realised that in my creating of the GKSession I'm not actually specifying whether the connection should be Wireless or Bluetooth. I have an option in my interface to let the user specify which connection method they'd like to use. How do I tell GKSession whether I want it to connect via Bluetooth or Wireless? I think what is currently happening is that it defaults to Wireless if wireless is enabled otherwise it uses Bluetooth. But I'd like to let the user specify which connection method, is this possible? Thanks, Donna

  Read the article

• Parse Credit Card input from Magnetic Stripe

  - by rockinthesixstring

  Does anyone know how to parse a credit card string input from a Magnetic Card Swiper? I tried a JavaScript parser but never got it to work. This is what the input looks like. %BNNNNNNNNNNNNNNNN^DOE/JOHN ^1210201901000101000100061000000?;NNNNNNNNNNNNNNNN=12102019010106111001? The N's are the credit card number.

  Read the article

• Wireless Network Disappearing From Available Networks (Windows 7)

  - by PeteDaMeat

  I have been using Windows 7 with a BT Voyager wireless adapter to connect to my home wireless network for around the last 6 months or so and until recently have experienced no problems. However, over the last couple of days Windows has been unable to connect to the network and the network name is no longer visible in the list of available wireless networks. The only way I have got round the problem is to reboot the NetGear router and to change the SSID to a network name which has not already been used. I do not believe the problem is with the router as my mobile phone can connect to it without any problems. The BT Voyager wireless adapter detects all other available networks so I presume this is a Windows 7 issue as it seems to occur when the PC is rebooted. This problen has happened twice in the last 2 days and is becoming extremely annoying. Does anyone have any suggestions?

  Read the article

• How to access a SIM card programatically?

  - by mawg

  Just any old GSM compatible SIM card (bonus for 3G USIM). I presume I need some hardware? Can anyone recommend something cheap for hobbyist, and something more professional? I presume that there will be full docs of an API with the h/w, so maybe this should be tagged "no-programming-related"? Sorry, if so. Any good URLs or books (I am conversant with the 3GPP standards). I'm not (black hat) hacking, don't worry, just not pleased with the likes of SIM Card Secretary, Data Doctor Recovery, etc, so would like to code my own, but might turn it commercial, or offer SIM card programming services (data recover from damaged card, etc) as a sideline.

  Read the article

• What is the best credit card processing service?

  - by JerSchneid

  We're looking to add credit card payments to our system (and it needs to be fairly custom, handling variable "per use" charges each month). We would like the integration to be simple and secure (i.e. no storing of credit card data on our system). What, in your opinion, is the best credit card processing provider to offer this kind of security and flexibility. List only one provider per answer to let the voting system do it's thing.

  Read the article

• Sound card / microphone impedance mismatch

  - by axk

  First of all I'm not completely sure this is impedance mismatch, but from what I found on the Internet I believe it is. It seems to be a common problem. The question is not as much about solving the problem as about why it is happening (if I'm right about the cause of the problem, of course). I had this quiet microphone problem with several built in cards and microphones and now with a Creative Audigy SE. There's a microphone boost option which introduces a lot of noise with volume increase, but even this doesn't seem to give loud enough sound in some cases. The mic on my current headphones is very quiet with Audigy SE without the boost but is very loud and low noise with an external Sound Blaster Connect. So the question is have I just been unlucky with my sound cards and microphones or is it a common problem? And if it is a common problem why is it so difficult for the vendors to standardize on the sound card / microphone impedance? Edit: the OS is Windows (XP/7), but I don't believe it is OS-specific.

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Video Card needs additional mounting support

  - by Sean

  We are creating a fairly decent system with crossfire. The issue we are having is apparently the video cards are physically to heavy to be supported purely by the motherboard and case mounts. Whenever we have the case horizontal everything works fine however when we bring the case upright the computer stops working. Relevant Info: Video Cards (2) - Sapphire 5870 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814102856) MotherBoard - Asus M4A79T Deluxe Case - CoolerMaster 922 HAF To me it looks as if an additional support bracket that could hold up the end of the card would be required (included with the viideo cards!!!) Does anyone have any experience with this.

  Read the article

• Wireless and Wired Network Access at same time?

  - by grasper

  At work, I use a laptop. It is a Dell Latitude D630 with Windows XP. I work in a lab environment where I need to use the Ethernet Port as a Static IP to interact with a local network (which cannot talk to the outside world). What I would like to do is use the Wireless as the internet connection so i can check email, etc at the same time I am using the ethernet network... It seems like this is not possible. Is there a piece of software or a way to configure it to allow me to do this?

  Read the article

• How to emulate wireless in Virtualbox?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >