Search Results

Search found 1213 results on 49 pages for 'jonathan allen'.

Page 47/49 | < Previous Page | 43 44 45 46 47 48 49  | Next Page >

  • How does one skip "Windows did not shut down successfully" in Win7-64?

    - by XenonofArcticus
    Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

    Read the article

  • How does one skip “Windows did not shut down successfully” in Win7-64?

    - by XenonofArcticus
    Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

    Read the article

  • SQL SERVER – Merge Operations – Insert, Update, Delete in Single Execution

    - by pinaldave
    This blog post is written in response to T-SQL Tuesday hosted by Jorge Segarra (aka SQLChicken). I have been very active using these Merge operations in my development. However, I have found out from my consultancy work and friends that these amazing operations are not utilized by them most of the time. Here is my attempt to bring the necessity of using the Merge Operation to surface one more time. MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. One of the most important advantages of MERGE statement is that the entire data are read and processed only once. In earlier versions, three different statements had to be written to process three different activities (INSERT, UPDATE or DELETE); however, by using MERGE statement, all the update activities can be done in one pass of database table. I have written about these Merge Operations earlier in my blog post over here SQL SERVER – 2008 – Introduction to Merge Statement – One Statement for INSERT, UPDATE, DELETE. I was asked by one of the readers that how do we know that this operator was doing everything in single pass and was not calling this Merge Operator multiple times. Let us run the same example which I have used earlier; I am listing the same here again for convenience. --Let’s create Student Details and StudentTotalMarks and inserted some records. USE tempdb GO CREATE TABLE StudentDetails ( StudentID INTEGER PRIMARY KEY, StudentName VARCHAR(15) ) GO INSERT INTO StudentDetails VALUES(1,'SMITH') INSERT INTO StudentDetails VALUES(2,'ALLEN') INSERT INTO StudentDetails VALUES(3,'JONES') INSERT INTO StudentDetails VALUES(4,'MARTIN') INSERT INTO StudentDetails VALUES(5,'JAMES') GO CREATE TABLE StudentTotalMarks ( StudentID INTEGER REFERENCES StudentDetails, StudentMarks INTEGER ) GO INSERT INTO StudentTotalMarks VALUES(1,230) INSERT INTO StudentTotalMarks VALUES(2,255) INSERT INTO StudentTotalMarks VALUES(3,200) GO -- Select from Table SELECT * FROM StudentDetails GO SELECT * FROM StudentTotalMarks GO -- Merge Statement MERGE StudentTotalMarks AS stm USING (SELECT StudentID,StudentName FROM StudentDetails) AS sd ON stm.StudentID = sd.StudentID WHEN MATCHED AND stm.StudentMarks > 250 THEN DELETE WHEN MATCHED THEN UPDATE SET stm.StudentMarks = stm.StudentMarks + 25 WHEN NOT MATCHED THEN INSERT(StudentID,StudentMarks) VALUES(sd.StudentID,25); GO -- Select from Table SELECT * FROM StudentDetails GO SELECT * FROM StudentTotalMarks GO -- Clean up DROP TABLE StudentDetails GO DROP TABLE StudentTotalMarks GO The Merge Join performs very well and the following result is obtained. Let us check the execution plan for the merge operator. You can click on following image to enlarge it. Let us evaluate the execution plan for the Table Merge Operator only. We can clearly see that the Number of Executions property suggests value 1. Which is quite clear that in a single PASS, the Merge Operation completes the operations of Insert, Update and Delete. I strongly suggest you all to use this operation, if possible, in your development. I have seen this operation implemented in many data warehousing applications. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Joins, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Merge

    Read the article

  • Markus Zirn, "Big Data with CEP and SOA" @ SOA, Cloud &amp; Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 Early-Bird Registration is Now Open with Special Pricing! Register before July 1, 2012 to qualify for discounts. Visit the Registration page for details. The International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Big Data with CEP and SOA - September 25, 2012 - 14:15 Speaker: Markus Zirn, Oracle and Baz Kuthi, Avocent The "Big Data" trend is driving new kinds of IT projects that process machine-generated data. Such projects store and mine using Hadoop/ Map Reduce, but they also analyze streaming data via event-driven patterns, which can be called "Fast Data" complementary to "Big Data". This session highlights how "Big Data" and "Fast Data" design patterns can be combined with SOA design principles into modern, event-driven architectures. We will describe specific architectures that combines CEP, Distributed Caching, Event-driven Network, SOA Composites, Application Development Framework, as well as Hadoop. Architecture patterns include pre-processing and filtering event streams as close as possible to the event source, in memory master data for event pattern matching, event-driven user interfaces as well as distributed event processing. Focus is on how "Fast Data" requirements are elegantly integrated into a traditional SOA architecture. Markus Zirn is Vice President of Product Management covering Oracle SOA Suite, SOA Governance, Application Integration Architecture, BPM, BPM Solutions, Complex Event Processing and UPK, an end user learning solution. He is the author of “The BPEL Cookbook” (rated best book on Services Oriented Architecture in 2007) as well as “Fusion Middleware Patterns”. Previously, he was a management consultant with Booz Allen & Hamilton’s High Tech practice in Duesseldorf as well as San Francisco and Vice President of Product Marketing at QUIQ. Mr. Zirn holds a Masters of Electrical Engineering from the University of Karlsruhe and is an alumnus of the Tripartite program, a joint European degree from the University of Karlsruhe, Germany, the University of Southampton, UK, and ESIEE, France. KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Markus Zirn,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • It’s the thought that counts…

    - by Tony Davis
    I recently finished editing a book called Tribal SQL, and it was a fantastic experience. It’s a community-sourced book written by first-timers. Fifteen previously unpublished authors contributed one chapter each, with the seemingly simple remit to write about “what makes them passionate about working with SQL Server, something that all SQL Server DBAs and developers really need to know”. Sure, some of the writing skills were a bit rusty as one would expect from busy people, but the ideas and energy were sheer nectar. Any seasoned editor can deal easily with the problem of fixing the output of untrained writers. We can handle with the occasional technical error too, which is why we have technical reviewers. The editor’s real job is to hone the clarity and flow of ideas, making the author’s knowledge and experience accessible to as many others as possible. What the writer needs to bring, on the other hand, is enthusiasm, attention to detail, common sense, and a sense of the person behind the writing. If any of these are missing, no editor can fix it. We can see these essential characteristics in many of the more seasoned and widely-published writers about SQL. To illustrate what I mean by enthusiasm, or passion, take a look at the work of Laerte Junior or Fabiano Amorim. Both authors have English as a second language, but their energy, enthusiasm, sheer immersion in a technology and thirst to know more, drives them, with a little editorial help, to produce articles of far more practical value than one can find in the “manuals”. There’s the attention to detail of the likes of Jonathan Kehayias, or Paul Randal. Read their work and one begins to understand the knowledge coupled with incredible rigor, the willingness to bend and test every piece of advice offered to make sure it’s correct, that marks out the very best technical writing. There’s the common sense of someone like Louis Davidson. All writers, including Louis, like to stretch the grey matter of their readers, but some of the most valuable writing is that which takes a complicated idea, or distils years of experience, and expresses it in a way that sounds like simple common sense. There’s personality and humor. Contrary to what you may have been told, they can and do mix well with technical writing, as long as they don’t become a distraction. Read someone like Rodney Landrum, or Phil Factor, for numerous examples of articles that teach hard technical lessons but also make you smile at least twice along the way. Writing well is not easy and it takes a certain bravery to expose your ideas and knowledge for dissection by others, but it doesn’t mean that writing should be the preserve only of those trained in the art, or best left to the MVPs. I believe that Tribal SQL is testament to the fact that if you have passion for what you do, and really know your topic then, with a little editorial help, you can write, and people will learn from what you have to say. You can read a sample chapter, by Mark Rasmussen, in this issue of Simple-Talk and I hope you’ll consider checking out the book (if you needed any further encouragement, it’s also for a good cause, Computers4Africa). Cheers, Tony  

    Read the article

  • SQLAuthority News – Community Service and Public Speaking Engagements

    - by pinaldave
    Today is the last day of the year and I was going over my memories for year 2010. Almost all of them are good and I feel for sure better person in terms of knowledge, nature and overall human being. Looking back at the year, it is very satisfying as I was able to go out in public and help community out at various capacity. Thought, most of the time my contribution was as speaker, many times, I have reached out and helped organized event and worked at any capacity to get the event out. I have taken parts in many TechEds, PASS events, Virtual Tech Days, Various Community Events around the Globe and my contribution is not limited to my country only. Overall – I feel good to be part of this wonderful and supportive community. SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010 SQLAuthority News – A Successful Performance Tuning Seminar at Pune – Dec 4-5, 2010 SQL SERVER – A Successful Performance Tuning Seminar – Hyderabad – Nov 27-28, 2010 – Next Pune SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience SQLAuthority News – Statistics and Best Practices – Virtual Tech Days – Nov 22, 2010 SQLAuthority News – SQL Server Performance Optimizations Seminar – Grand Success – Colombo, Sri Lanka – Oct 4 – 5, 2010 SQL SERVER – Visiting Alma Mater – Delivering Session on Database Performance and Career – Nirma Institute of Technology SQLAuthority News – Feedback Received for Virtual Tech Days Sessions on Spatial Database SQLAuthority News – Community Tech Days, Ahmedabad – July 24, 2010 SQLAuthority News – SQL Data Camp, Chennai, July 17, 2010 – A Huge Success SQLAuthority News – 2 Sessions at TechInsight 2010 – June 29 – July 1, 2010 SQLAuthority News – Author Visit – SQL Server 2008 R2 Launch SQLAuthority News – Professional Development and Community SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Opportunity of A Lifetime SQLAuthority News – Speaking Sessions at TechEd India – 3 Sessions – 1 Panel Discussion SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010 SQLAuthority News – Excellent Event – TechEd Sri Lanka – Feb 8, 2010 SQLAuthority News – Hyderabad Techies February Fever Feb 11, 2010 – Indexing for Performance SQLAuthority News – MUGH – Microsoft User Group Hyderabad – Feb 2, 2010 Session Review SQLAuthority News – Ahmedabad Community Tech Days – Jan 30, 2010 – Huge Success For earlier year’s contribution you can check my webpage over here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology

    Read the article

  • Archiving SQLHelp tweets

    - by jamiet
    #SQLHelp is a Twitter hashtag that can be used by any Twitter user to get help from the SQL Server community. I think its fair to say that in its first year of being it has proved to be a very useful resource however Kendra Little (@kendra_little) made a very salient point yesterday when she tweeted: Is there a way to search the archives of #sqlhelp Trying to remember answer to a question I know I saw a couple months ago http://twitter.com/#!/Kendra_Little/status/15538234184441856 This highlights an inherent problem with Twitter’s search capability – it simply does not reach far enough back in time. I have made steps to remedy that situation by putting into place two initiatives to archive Tweets that contain the #sqlhelp hashtag. The Archivist http://archivist.visitmix.com/ is a free service that, quite simply, archives a history of tweets that contain a given search term by periodically polling Twitter’s search service with that search term and subsequently displaying a dashboard providing an aggregate view of those tweets for things like tweet volume over time, top users and top words (Archivist FAQ). I have set up an archive on The Archivist for “sqlhelp” which you can view at http://archivist.visitmix.com/jamiet/7. Here is a screenshot of the SQLHelp dashboard 36 minutes after I set it up: There is lots of good information in there, including the fact that Jonathan Kehayias (@SQLSarg) is the most active SQLHelp tweeter (I suspect as an answerer rather than a questioner ) and that SSIS has proven to be a rather (ahem) popular subject!! Datasift The Archivist has its uses though for our purposes it has a couple of downsides. For starters you cannot search through an archive (which is what Kendra was after) and nor can you export the contents of the archive for offline analysis. For those functions we need something a bit more heavyweight and for that I present to you Datasift. Datasift is a tool (currently an alpha release) that allows you to search for tweets and provide them through an object called a Datasift stream. That sounds very similar to normal Twitter search though it has one distinct advantage that other Twitter search tools do not – Datasift has access to Twitter’s Streaming API (aka the Twitter Firehose). In addition it has access to a lot of other rather nice features: It provides the Datasift API that allows you to consume the output of a Datasift stream in your tool of choice (bring on my favourite ultimate mashup tool J ) It has a query language (called Filtered Stream Definition Language – FSDL for short) A Datasift stream can consume (and filter) other Datasift streams Datasift can (and does) consume services other than Twitter If I refer to Datasift as “ETL for tweets” then you may get some sort of idea what it is all about. Just as I did with The Archivist I have set up a publicly available Datasift stream for “sqlhelp” at http://datasift.net/stream/1581/sqlhelp. Here is the FSDL query that provides the data: twitter.text contains "sqlhelp" Pretty simple eh? At the current time it provides little more than a rudimentary dashboard but as Datasift is currently an alpha release I think this may be worth keeping an eye on. The real value though is the ability to consume the output of a stream via Datasift’s RESTful API, observe: http://api.datasift.net/stream.xml?stream_identifier=c7015255f07e982afdeebdf1ae6e3c0d&username=jamiet&api_key=XXXXXXX (Note that an api_key is required during the alpha period so, given that I’m not supplying my api_key, this URI will not work for you) Just to prove that a Datasift stream can indeed consume data from another stream I have set up a second stream that further filters the first one for tweets containing “SSIS”. That one is at http://datasift.net/stream/1586/ssis-sqlhelp and here is the FSDL query: rule "414c9845685ff8d2548999cf3162e897" and (interaction.content contains "ssis") When Datasift moves beyond alpha I’ll re-assess how useful this is going to be and post a follow-up blog. @Jamiet

    Read the article

  • F# in ASP.NET, mathematics and testing

    - by DigiMortal
    Starting from Visual Studio 2010 F# is full member of .NET Framework languages family. It is functional language with syntax specific to functional languages but I think it is time for us also notice and study functional languages. In this posting I will show you some examples about cool things other people have done using F#. F# and ASP.NET As I am ASP/ASP.NET MVP I am – of course – interested in how people use different languages and technologies with ASP.NET. C# MVP Tomáš Petrícek writes about developing ASP.NET MVC applications using F#. He also shows how to use LINQ To SQL in F# (using F# PowerPack) and provides sample solution and Visual Studio 2010 template for F# MVC web applications. You may also find interesting how you can create controllers in F#. Excellent work, Tomáš! Vladimir Matveev has interesting example about how to use F# and ApplicationHost class to process ASP.NET requests ouside of IIS. This is simple and very straight-forward example and I strongly suggest you to take a look at it. Very cool example is project Strom in Codeplex. Storm is web services testing tool that is fully written on F#. Take a look at this site because Codeplex offers also source code besides binaries. Math Functional languages are strong in fields like mathematics and physics. When I wrote my C# example about BigInteger class I found out that recursive version of Fibonacci algorithm in C# is not performing well. In same time I made same experiment on F# and in F# there were no performance problems with recursive version. You can find F# version of Fibonacci algorithm from Bob Palmer’s blog posting Fibonacci numbers in F#. Although golden spiral is useful for solving many problems I looked for some practical code example and found one. Kean Walmsley published in his Through the Interface blog very interesting posting Creating Fibonacci spirals in AutoCAD using F#. There are also other cool examples you may be interested in. Using numerical components by Extreme Optimization  it is possible to make some numerical integration (quadrature method) using F# (also C# example is available). fsharp.it introduces factorials calculation on F#. Robert Pickering has made very good work on programming The Game of Life in Silverlight and F# – I definitely suggest you to try out this example as it is very illustrative too. Who wants something more complex may take a look at Newton basin fractal example in F# by Jonathan Birge. Testing After some searching and surfing I found out that there is almost everything available for F# to write tests and test your F# code. FsCheck - FsCheck is a port of Haskell's QuickCheck. Important parts of the manual for using FsCheck is almost literally "adapted" from the QuickCheck manual and paper. Any errors and omissions are entirely my responsibility. FsTest - This project is designed to Language Oriented Programming constructs around unit testing and behavior testing in F#. The goal of this project is to create a Domain Specific Language for testing F# code in a way that makes sense for functional programming. FsUnit - FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework. xUnit.NET - xUnit.net is a developer testing framework, built to support Test Driven Development, with a design goal of extreme simplicity and alignment with framework features. It is compatible with .NET Framework 2.0 and later, and offers several runners: console, GUI, MSBuild, and Visual Studio integration via TestDriven.net, CodeRush Test Runner and Resharper. It also offers test project integration for ASP.NET MVC. Getting started Well, as a first thing you need Visual Studio 2010. Then take a look at these resources: F# samples @ MSDN Microsoft F# Developer Center @ MSDN F# Language Reference @ MSDN F# blog F# forums Real World Functional Programming: With Examples in F# and C# (Amazon) Happy F#-ing! :)

    Read the article

  • 10 Best Programming Podcast 2010 Edition

    - by mbcrump
    This list is in no particular order. Just the 10 best programming podcast that I have found so far. Stack Overflow Podcast -  Jeff Atwood (of codinghorror.com) and Joel Spolsky (of joelonsoftware.com) discuss the development of their new programming community, StackOverflow.com. [This Podcast hasn’t been updated in a while, but its always great to hear more from Jeff Atwood] Hanselminutes - Hanselminutes is a weekly audio talk show with noted web developer and technologist Scott Hanselman and hosted by Carl Franklin. Scott discusses utilities and tools, gives practical how-to advice, and discusses ASP.NET or Windows issues and workarounds. [This Podcast has recently started talking about random topics like diabetes, plane travel and geek relationship tips.  I am not sure if Scott is trying to move to a more mainstream audience or not] Herding Code - A weekly discussion featuring K. Scott Allen (odetocode.com), Kevin Dente, Scott Koon (lazycoder.com), and Jon Galloway. [Great all all-around podcast that I would recommend to all] Deep Fried Bytes - Deep Fried Bytes is an audio talk show with a Southern flavor hosted by technologists and developers Keith Elder and Chris Woodruff. The show discusses a wide range of topics including application development, operating systems and technology in general. Anything is fair game if it plugs into the wall or takes a battery. [This is one that just keeps getting better] Dot Net Rocks - .NET Rocks! is an Internet Audio Talk Show for Microsoft .NET Developers. [One of the first and usually very high quality content] Connected Show - Connected Show Podcast! A podcast covering new Microsoft technology for the developer community. The show is hosted by Dmitry Lyalin and Peter Laudati. [This and Polymorphic are one of my favorite podcast – Dmitry is a great host and would recommend this to all] Polymorphic Podcast - Object oriented development, architecture and best practices in .NET [Craig is a ASP.NET MVP and a great presenter. His podcast is great and it could only be better if he recorded it more often] ASP.NET Podcast - Wallace B. (Wally) McClure presents interviews and short technical talks on .NET Technologies. [Has great information on ASP.NET of course as well as iPhone Dev] Ruby on Rails Podcast - News and interviews about the Ruby language and the Rails website framework. [Even though I am not a Ruby programmer, I’ve found this podcast very interesting] Software Engineering Radio - Software Engineering Radio is a podcast targeted at the professional software developer. The goal is to be a lasting educational resource, not a newscast. Every ten days, a new episode is published that covers all topics software engineering. Episodes are either tutorials on a specific topic, or an interview with a well-known character from the software engineering world. All SE Radio episodes are original content ? we do not record conferences or talks given in other venues. Each episode comprises two speakers to ensure a lively listening experience. SE Radio is an independent and non-commercial organization. [Another excellent podcast – I would recommend any programmer add this to his/her drive home] If I have missed something, please feel free to email me and it might make the 2011 list. =)

    Read the article

  • Application Performance Episode 2: Announcing the Judges!

    - by Michaela Murray
    The story so far… We’re writing a new book for ASP.NET developers, and we want you to be a part of it! If you work with ASP.NET applications, and have top tips, hard-won lessons, or sage advice for avoiding, finding, and fixing performance problems, we want to hear from you! And if your app uses SQL Server, even better – interaction with the database is critical to application performance, so we’re looking for database top tips too. There’s a Microsoft Surface apiece for the person who comes up with the best tip for SQL Server and the best tip for .NET. Of course, if your suggestion is selected for the book, you’ll get full credit, by name, Twitter handle, GitHub repository, or whatever you like. To get involved, just email your nuggets of performance wisdom to [email protected] – there are examples of what we’re looking for and full competition details at Application Performance: The Best of the Web. Enter the judges… As mentioned in my last blogpost, we have a mystery panel of celebrity judges lined up to select the prize-winning performance pointers. We’re now ready to reveal their secret identities! Judging your ASP.NET  tips will be: Jean-Phillippe Gouigoux, MCTS/MCPD Enterprise Architect and MVP Connected System Developer. He’s a board member at French software company MGDIS, and teaches algorithms, security, software tests, and ALM at the Université de Bretagne Sud. Jean-Philippe also lectures at IT conferences and writes articles for programming magazines. His book Practical Performance Profiling is published by Simple-Talk. Nik Molnar,  a New Yorker, ASP Insider, and co-founder of Glimpse, an open source ASP.NET diagnostics and debugging tool. Originally from Florida, Nik specializes in web development, building scalable, client-centric solutions. In his spare time, Nik can be found cooking up a storm in the kitchen, hanging with his wife, speaking at conferences, and working on other open source projects. Mitchel Sellers, Microsoft C# and DotNetNuke MVP. Mitchel is an experienced software architect, business leader, public speaker, and educator. He works with companies across the globe, as CEO of IowaComputerGurus Inc. Mitchel writes technical articles for online and print publications and is the author of Professional DotNetNuke Module Programming. He frequently answers questions on StackOverflow and MSDN and is an active participant in the .NET and DotNetNuke communities. Clive Tong, Software Engineer at Red Gate. In previous roles, Clive spent a lot of time working with Common LISP and enthusing about functional languages, and he’s worked with managed languages since before his first real job (which was a long time ago). Long convinced of the productivity benefits of managed languages, Clive is very interested in getting good runtime performance to keep managed languages practical for real-world development. And our trio of SQL Server specialists, ready to select your top suggestion, are (drumroll): Rodney Landrum, a SQL Server MVP who writes regularly about Integration Services, Analysis Services, and Reporting Services. He’s authored SQL Server Tacklebox, three Reporting Services books, and contributes regularly to SQLServerCentral, SQL Server Magazine, and Simple–Talk. His day job involves overseeing a large SQL Server infrastructure in Orlando. Grant Fritchey, Product Evangelist at Red Gate and SQL Server MVP. In an IT career spanning more than 20 years, Grant has written VB, VB.NET, C#, and Java. He’s been working with SQL Server since version 6.0. Grant volunteers with the Editorial Committee at PASS and has written books for Apress and Simple-Talk. Jonathan Allen, leader and founder of the PASS SQL South West user group. He’s been working with SQL Server since 1999 and enjoys performance tuning, development, and using SQL Server for business solutions. He’s spoken at SQLBits and SQL in the City, as well as local user groups across the UK. He’s also a moderator at ask.sqlservercentral.com.

    Read the article

  • T-SQL Tuesday #025 &ndash; CHECK Constraint Tricks

    - by Most Valuable Yak (Rob Volk)
    Allen White (blog | twitter), marathoner, SQL Server MVP and presenter, and all-around awesome author is hosting this month's T-SQL Tuesday on sharing SQL Server Tips and Tricks.  And for those of you who have attended my Revenge: The SQL presentation, you know that I have 1 or 2 of them.  You'll also know that I don't recommend using anything I talk about in a production system, and will continue that advice here…although you might be sorely tempted.  Suffice it to say I'm not using these examples myself, but I think they're worth sharing anyway. Some of you have seen or read about SQL Server constraints and have applied them to your table designs…unless you're a vendor ;)…and may even use CHECK constraints to limit numeric values, or length of strings, allowable characters and such.  CHECK constraints can, however, do more than that, and can even provide enhanced security and other restrictions. One tip or trick that I didn't cover very well in the presentation is using constraints to do unusual things; specifically, limiting or preventing inserts into tables.  The idea was to use a CHECK constraint in a way that didn't depend on the actual data: -- create a table that cannot accept data CREATE TABLE dbo.JustTryIt(a BIT NOT NULL PRIMARY KEY, CONSTRAINT chk_no_insert CHECK (GETDATE()=GETDATE()+1)) INSERT dbo.JustTryIt VALUES(1)   I'll let you run that yourself, but I'm sure you'll see that this is a pretty stupid table to have, since the CHECK condition will always be false, and therefore will prevent any data from ever being inserted.  I can't remember why I used this example but it was for some vague and esoteric purpose that applies to about, maybe, zero people.  I come up with a lot of examples like that. However, if you realize that these CHECKs are not limited to column references, and if you explore the SQL Server function list, you could come up with a few that might be useful.  I'll let the names describe what they do instead of explaining them all: CREATE TABLE NoSA(a int not null, CONSTRAINT CHK_No_sa CHECK (SUSER_SNAME()<>'sa')) CREATE TABLE NoSysAdmin(a int not null, CONSTRAINT CHK_No_sysadmin CHECK (IS_SRVROLEMEMBER('sysadmin')=0)) CREATE TABLE NoAdHoc(a int not null, CONSTRAINT CHK_No_AdHoc CHECK (OBJECT_NAME(@@PROCID) IS NOT NULL)) CREATE TABLE NoAdHoc2(a int not null, CONSTRAINT CHK_No_AdHoc2 CHECK (@@NESTLEVEL>0)) CREATE TABLE NoCursors(a int not null, CONSTRAINT CHK_No_Cursors CHECK (@@CURSOR_ROWS=0)) CREATE TABLE ANSI_PADDING_ON(a int not null, CONSTRAINT CHK_ANSI_PADDING_ON CHECK (@@OPTIONS & 16=16)) CREATE TABLE TimeOfDay(a int not null, CONSTRAINT CHK_TimeOfDay CHECK (DATEPART(hour,GETDATE()) BETWEEN 0 AND 1)) GO -- log in as sa or a sysadmin server role member, and try this: INSERT NoSA VALUES(1) INSERT NoSysAdmin VALUES(1) -- note the difference when using sa vs. non-sa -- then try it again with a non-sysadmin login -- see if this works: INSERT NoAdHoc VALUES(1) INSERT NoAdHoc2 VALUES(1) GO -- then try this: CREATE PROCEDURE NotAdHoc @val1 int, @val2 int AS SET NOCOUNT ON; INSERT NoAdHoc VALUES(@val1) INSERT NoAdHoc2 VALUES(@val2) GO EXEC NotAdHoc 2,2 -- which values got inserted? SELECT * FROM NoAdHoc SELECT * FROM NoAdHoc2   -- and this one just makes me happy :) INSERT NoCursors VALUES(1) DECLARE curs CURSOR FOR SELECT 1 OPEN curs INSERT NoCursors VALUES(2) CLOSE curs DEALLOCATE curs INSERT NoCursors VALUES(3) SELECT * FROM NoCursors   I'll leave the ANSI_PADDING_ON and TimeOfDay tables for you to test on your own, I think you get the idea.  (Also take a look at the NoCursors example, notice anything interesting?)  The real eye-opener, for me anyway, is the ability to limit bad coding practices like cursors, ad-hoc SQL, and sa use/abuse by using declarative SQL objects.  I'm sure you can see how and why this would come up when discussing Revenge: The SQL.;) And the best part IMHO is that these work on pretty much any version of SQL Server, without needing Policy Based Management, DDL/login triggers, or similar tools to enforce best practices. All seriousness aside, I highly recommend that you spend some time letting your mind go wild with the possibilities and see how far you can take things.  There are no rules! (Hmmmm, what can I do with rules?) #TSQL2sDay

    Read the article

  • Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles

    - by Gopinath
    Android is a great mobile OS but one thought that lingers in the mind of few Android owners is: Am I using a cheap iPhone? This is valid thought for many low end Android users as their phones runs sluggish and the user interface of Android looks like an imitation of iOS. When it comes to Windows Phone 7 users, even though their operating system features are not as great as iPhone/Android but it has its unique user interface; Windows Phone 7 user interface is a very intuitive and fresh, it’s constantly updating Live Tiles show all the required information on the home screen. Android has best mobile operating system features except UI and Windows Phone 7 has excellent user interface. How about porting Windows Phone 7 Tiles interface on an Android? That should be great. Launch 7 app brings the best of Windows Phone 7 look and feel to Android OS. Once the Launcher 7 app is installed and activated, it brings Live Tiles or constantly updating controls that show information on Android home screen. Apart from simple and smooth tiles, there are handful of customization options provided. Users can change colour of the tiles, add new tiles, enable/disable transitions. The reviews on Android Market are on the positive side with 4.4 stars by 10,000 + reviewers. Here are few user reviews 1. Does what it says. only issue for me is that the app drawer doesn’t rotate. And I would like the UI to rotate when my KB is opened. HTC desire z – Jonathan 2. Works great on atrix.Kudos to developers. Awesome. Though needs: Better notification bar More stock images of tiles Better fitting of widgets on tiles – Manny 3. Looks really good like it much more than I thought I would runs real smooth running royal ginger 2.1 – Jay 4. Omg amazing i am definetly keeping it as my default best of android and windows – Devon 5. Man! An update every week! Very very responsive developer! – Andrew You can read more reviews on Android Market here.  There is no doubt that this application is receiving rave reviews. After scanning a while through the reviews, few complaints throw light on the negative side: Battery drains a bit faster & Low end mobile run a bit sluggish. The application is available in two versions – an ad supported free version and $1.41 ad free version. Download Launcher 7 from Android Market This article titled,Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • A more elegant way of embedding a SOAP security header in Silverlight 4

    - by Your DisplayName here!
    The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

    Read the article

  • problem using getline with a unicode file

    - by hamishmcn
    UPDATE: Thank you to @Potatoswatter and @Jonathan Leffler for comments - rather embarrassingly I was caught out by the debugger tool tip not showing the value of a wstring correctly - however it still isn't quite working for me and I have updated the question below: If I have a small multibyte file I want to read into a string I use the following trick - I use getline with a delimeter of '\0' e.g. std::string contents_utf8; std::ifstream inf1("utf8.txt"); getline(inf1, contents_utf8, '\0'); This reads in the entire file including newlines. However if I try to do the same thing with a wide character file it doesn't work - my wstring only reads to the the first line. std::wstring contents_wide; std::wifstream inf2(L"ucs2-be.txt"); getline( inf2, contents_wide, wchar_t(0) ); //doesn't work For example my if unicode file contains the chars A and B seperated by CRLF, the hex looks like this: FE FF 00 41 00 0D 00 0A 00 42 Based on the fact that with a multibyte file getline with '\0' reads the entire file I believed that getline( inf2, contents_wide, wchar_t(0) ) should read in the entire unicode file. However it doesn't - with the example above my wide string would contain the following two wchar_ts: FF FF (If I remove the wchar_t(0) it reads in the first line as expected (ie FE FF 00 41 00 0D 00) Why doesn't wchar_t(0) work as a delimiting wchar_t of "00 00"? Thank you

    Read the article

  • SQL - Converting 24-hour ("military") time (2145) to "AM/PM time" (9:45 pm)

    - by CheeseConQueso
    I have 2 fields I'm working with that are stored as smallint military structured times. Edit I'm running on IBM Informix Dynamic Server Version 10.00.FC9 beg_tm and end_tm Sample values beg_tm 545 end_tm 815 beg_tm 1245 end_tm 1330 Sample output beg_tm 5:45 am end_tm 8:15 am beg_tm 12:45 pm end_tm 1:30 pm I had this working in Perl, but I'm looking for a way to do it with SQL and case statements. Is this even possible? EDIT Essentially, this formatting has to be used in an ACE report. I couldn't find a way to format it within the output section using simple blocks of if(beg_tm>=1300) then beg_tm = vbeg_tm - 1200 Where vbeg_tm is a declared char(4) variable EDIT This works for hours =1300 (EXCEPT FOR 2230 !!) select substr((beg_tm-1200),0,1)||":"||substr((beg_tm-1200),2,2) from mtg_rec where beg_tm>=1300; This works for hours < 1200 (sometimes.... 10:40 is failing) select substr((mtg_rec.beg_tm),0,(length(cast(beg_tm as varchar(4)))-2))||":"||(substr((mtg_rec.beg_tm),2,2))||" am" beg_tm from mtg_rec where mtg_no = 1; EDIT Variation of casting syntax used in Jonathan Leffler's expression approach SELECT beg_tm, cast((MOD(beg_tm/100 + 11, 12) + 1) as VARCHAR(2)) || ':' || SUBSTRING(cast((MOD(beg_tm, 100) + 100) as CHAR(3)) FROM 2) || SUBSTRING(' am pm' FROM (MOD(cast((beg_tm/1200) as INT), 2) * 3) + 1 FOR 3), end_tm, cast((MOD(end_tm/100 + 11, 12) + 1) as VARCHAR(2)) || ':' || SUBSTRING(cast((MOD(end_tm, 100) + 100) as CHAR(3)) FROM 2) || SUBSTRING(' am pm' FROM (MOD(cast((end_tm/1200) as INT), 2) * 3) + 1 FOR 3) FROM mtg_rec where mtg_no = 39;

    Read the article

  • Top Container Background Problem

    - by Norbert
    Here's a screenshot: http://dl.getdropbox.com/u/118004/Screen%20shot%202010-04-13%20at%202.50.49%20PM.png The red bar on the left is the background I set for the #personal div and I would like it to align to the top of the container, vertically. The problem is that I have a background for the #container-top div on top of the #container div with absolute positioning. Is there any way to move the #personal div up so there would be no space left? HTML <div id="container"> <div id="container-top"></div> <div id="personal"> <h1>Jonathan Doe</h1> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliqua erat volutpat.</p> </div> <!-- end #personal --> </div> <!-- end #container --> CSS #container { background: url(images/bg-mid.png) repeat-y top center; width: 835px; margin: 40px auto; position: relative; } #container-top { background: url(images/bg-top.png) no-repeat top center; position: absolute; height: 12px; width: 835px; top: -12px; } #container-bottom { background: url(images/bg-bottom.png) no-repeat top center; position: absolute; height: 27px; width: 835px; bottom: -27px; } #personal { background: url(images/personal-info.png) no-repeat 0px left; }

    Read the article

  • Bash Templating: How to build configuration files from templates with Bash?

    - by FractalizeR
    Hello. I'm writting a script to automate creating configuration files for Apache and PHP for my own webserver. I don't want to use any GUIs like CPanel or ISPConfig. I have some templates of Apache and PHP configuration files. Bash script needs to read templates, make variable substitution and output parsed templates into some folder. What is the best way to do that? I can think of several ways. Which one is the best or may be there are some better ways to do that? I want to do that in pure Bash (it's easy in PHP for example) 1)http://stackoverflow.com/questions/415677/how-to-repace-variables-in-a-nix-text-file template.txt: the number is ${i} the word is ${word} script.sh: #!/bin/sh #set variables i=1 word="dog" #read in template one line at the time, and replace variables #(more natural (and efficient) way, thanks to Jonathan Leffler) while read line do eval echo "$line" done < "./template.txt" BTW, how do I redirect output to external file here? Do I need to escape something if variables contain, say, quotes? 2) Using cat & sed for replacing each variable with it's value: Given template.txt: The number is ${i} The word is ${word} Command: cat template.txt | sed -e "s/\${i}/1/" | sed -e "s/\${word}/dog/" Seems bad to me because of the need to escape many different symbols and with many variables the line will be tooooo long. Can you think of some other elegant and safe solution?

    Read the article

  • Floating point precision in Visual C++

    - by Luigi Giaccari
    HI, I am trying to use the robust predicates for computational geometry from Jonathan Richard Shewchuk. I am not a programmer, so I am not even sure of what I am saying, I may be doing some basic mistake. The point is the predicates should allow for precise aritmthetic with adaptive floating point precision. On my computer: Asus pro31/S (Core Due Centrino Processor) they do not work. The problem may stay in the fact the my computer may use some improvements in the floating point precision taht conflicts with the one used by Shewchuk. The author says: /* On some machines, the exact arithmetic routines might be defeated by the / / use of internal extended precision floating-point registers. Sometimes / / this problem can be fixed by defining certain values to be volatile, / / thus forcing them to be stored to memory and rounded off. This isn't / / a great solution, though, as it slows the arithmetic down. */ Now what I would like to know is that there is a way, maybe some compiler option, to turn off the internal extended precision floating-point registers. I really appriaciate your help

    Read the article

  • Attempted to read or write protected memory

    - by Interfector
    I have a sample ASP.NET MVC 3 web application that is following Jonathan McCracken's Test-Drive Asp.NET MVC (great book , by the way) and I have stumbled upon a problem. Note that I'm using MVCContrib, Rhino and NUnit. [Test] public void ShouldSetLoggedInUserToViewBag() { var todoController = new TodoController(); var builder = new TestControllerBuilder(); builder.InitializeController(todoController); builder.HttpContext.User = new GenericPrincipal(new GenericIdentity("John Doe"), null); Assert.That(todoController.Index().AssertViewRendered().ViewData["UserName"], Is.EqualTo("John Doe")); } The code above always throws this error: System.AccessViolationException : Attempted to read or write protected memory. This is often an indication that other memory is corrupt. The controller action code is the following: [HttpGet] public ActionResult Index() { ViewData.Model = Todo.ThingsToBeDone; ViewBag.UserName = HttpContext.User.Identity.Name; return View(); } From what I have figured out, the app seems to crash because of the two assignements in the controller action. However, I cannot see how there are wrong!? Can anyone help me pinpoint the solution to this problem. Thank you.

    Read the article

  • Fixing color in scatter plots in matplotlib

    - by ajhall
    Hi guys, I'm going to have to come back and add some examples if you need them, which you might. But, here's the skinny- I'm plotting scatter plots of lab data for my research. I need to be able to visually compare the scatter plots from one plot to the next, so I want to fix the color range on the scatter plots and add in a colorbar to each plot (which will be the same in each figure). Essentially, I'm fixing all aspects of the axes and colorspace etc. so that the plots are directly comparable by eye. For the life of me, I can't seem to get my scatter() command to properly set the color limits in the colorspace (default)... i.e., I figure out my total data's min and total data's max, then apply them to vmin, vmax, for the subset of data, and the color still does not come out properly in both plots. This must come up here and there, I can't be the only one that wants to compare various subsets of data amongst plots... so, how do you fix the colors so that each data keeps it's color between plots and doesn't get remapped to a different color due to the change in max/min of the subset -v- the whole set? I greatly appreciate all your thoughts!!! A mountain-dew and fiery-hot cheetos to all! -Allen

    Read the article

  • Reading data from an open HTTP stream

    - by allenjones
    Hi, I am trying to use the .NET WebRequest/WebResponse classes to access the Twitter streaming API here "http://stream.twitter.com/spritzer.json". I need to be able to open the connection and read data incrementally from the open connection. Currently, when I call WebRequest.GetResponse method, it blocks until the entire response is downloaded. I know there is a BeginGetResponse method, but this will just do the same thing on a background thread. I need to get access to the response stream while the download is still happening. This just does not seem possible to me with these classes. There is a specific comment about this in the Twitter documentation: "Please note that some HTTP client libraries only return the response body after the connection has been closed by the server. These clients will not work for accessing the Streaming API. You must use an HTTP client that will return response data incrementally. Most robust HTTP client libraries will provide this functionality. The Apache HttpClient will handle this use case, for example." They point to the Appache HttpClient, but that doesn't help much because I need to use .NET. Any ideas whether this is possible with WebRequest/WebResponse, or do I have to go for lower level networking classes? Maybe there are other libraries that will allow me to do this? Thx Allen

    Read the article

  • Can I use POSIX signals in my Perl program to create event-driven programming?

    - by Shiftbit
    Is there any POSIX signals that I could utilize in my Perl program to create event-driven programming? Currently, I have multi-process program that is able to cross communicate but my parent thread is only able to listen to listen at one child at a time. foreach (@proc) { sysread(${$_}{'read'}, my $line, 100); #problem here chomp($line); print "Parent hears: $line\n"; } The problem is that the parent sits in a continual wait state until it receives it a signal from the first child before it can continue on. I am relying on 'pipe' for my intercommunication. My current solution is very similar to: http://stackoverflow.com/questions/2558098/how-can-i-use-pipe-to-facilitate-interprocess-communication-in-perl If possible I would like to rely on a $SIG{...} event or any non-CPAN solution. Update: As Jonathan Leffler mentioned, kill can be used to send a signal: kill USR1 = $$; # send myself a SIGUSR1 My solution will be to send a USR1 signal to my child process. This event tells the parent to listen to the particular child. child: kill USR1 => $parentPID if($customEvent); syswrite($parentPipe, $msg, $buffer); #select $parentPipe; print $parentPipe $msg; parent: $SIG{USR1} = { #get child pid? sysread($array[$pid]{'childPipe'}, $msg, $buffer); }; But how do I get my the source/child pid that signaled the parent? Have the child Identify itself in its message. What happens if two children signal USR1 at the same time?

    Read the article

  • Managing My Database in Source Control

    - by Jason
    As I am working with a new database project (within VS2008), and as I have never developed a database from scratch, I immediately began looking into how to manage a database within source control (in this case, Subversion). I found some information on SO, including this post: Keeping development databases in multiple environments in sync. One of the answers in particular pointed to a number of a links, all of which had good, useful information. I was reading a series of posts by K. Scott Allen which describe how he manages database change. From my reading (and please pardon the noobishness of my question), it seems as though the database itself is never checked into a repository. Rather, scripts that can build the database, along with test data (which is also populated from scripts) is checked into the repository. Ultimately, this means that, when a developer is testing his or her app, these scripts, which are part of the build process, are run. This ensures that the database is up-to-date, but is also run locally from every developer's machine. This makes sense to me (if I am indeed reading that correctly). However, if I am missing something, I would appreciate correction or additional guidance. In addition, another question I wanted to ask - does this also mean that I should NOT check in the mdf or ldf files that are created from Visual Studio? Thanks for any help and additional insight. Always appreciated.

    Read the article

  • System locking up with suspicious messages about hard disk

    - by Chris Conway
    My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

    Read the article

  • SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28

    - by pinaldave
    CXPACKET has to be most popular one of all wait stats. I have commonly seen this wait stat as one of the top 5 wait stats in most of the systems with more than one CPU. Books On-Line: Occurs when trying to synchronize the query processor exchange iterator. You may consider lowering the degree of parallelism if contention on this wait type becomes a problem. CXPACKET Explanation: When a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. There is an organizer/coordinator thread (thread 0), which takes waits for all the threads to complete and gathers result together to present on the client’s side. The organizer thread has to wait for the all the threads to finish before it can move ahead. The Wait by this organizer thread for slow threads to complete is called CXPACKET wait. Note that not all the CXPACKET wait types are bad. You might experience a case when it totally makes sense. There might also be cases when this is unavoidable. If you remove this particular wait type for any query, then that query may run slower because the parallel operations are disabled for the query. Reducing CXPACKET wait: We cannot discuss about reducing the CXPACKET wait without talking about the server workload type. OLTP: On Pure OLTP system, where the transactions are smaller and queries are not long but very quick usually, set the “Maximum Degree of Parallelism” to 1 (one). This way it makes sure that the query never goes for parallelism and does not incur more engine overhead. EXEC sys.sp_configure N'cost threshold for parallelism', N'1' GO RECONFIGURE WITH OVERRIDE GO Data-warehousing / Reporting server: As queries will be running for long time, it is advised to set the “Maximum Degree of Parallelism” to 0 (zero). This way most of the queries will utilize the parallel processor, and long running queries get a boost in their performance due to multiple processors. EXEC sys.sp_configure N'cost threshold for parallelism', N'0' GO RECONFIGURE WITH OVERRIDE GO Mixed System (OLTP & OLAP): Here is the challenge. The right balance has to be found. I have taken a very simple approach. I set the “Maximum Degree of Parallelism” to 2, which means the query still uses parallelism but only on 2 CPUs. However, I keep the “Cost Threshold for Parallelism” very high. This way, not all the queries will qualify for parallelism but only the query with higher cost will go for parallelism. I have found this to work best for a system that has OLTP queries and also where the reporting server is set up. Here, I am setting ‘Cost Threshold for Parallelism’ to 25 values (which is just for illustration); you can choose any value, and you can find it out by experimenting with the system only. In the following script, I am setting the ‘Max Degree of Parallelism’ to 2, which indicates that the query that will have a higher cost (here, more than 25) will qualify for parallel query to run on 2 CPUs. This implies that regardless of the number of CPUs, the query will select any two CPUs to execute itself. EXEC sys.sp_configure N'cost threshold for parallelism', N'25' GO EXEC sys.sp_configure N'max degree of parallelism', N'2' GO RECONFIGURE WITH OVERRIDE GO Read all the post in the Wait Types and Queue series. Additionally a must read comment of Jonathan Kehayias. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest you all to read the online book for further clarification. All the discussion of Wait Stats over here is generic and it varies from system to system. It is recommended that you test this on the development server before implementing on the production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

< Previous Page | 43 44 45 46 47 48 49  | Next Page >