Search Results

Search found 1474 results on 59 pages for 'minimal'.

Page 47/59 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• g++ fails mysteriously only if a .h is in a certain directory

  - by ggambett

  I'm experiencing an extremely weird problem in a fresh OSX 10.4.11 + Xcode 2.5 installation. I've reduced it to a minimal test case. Here's test.cpp: #include "macros.h" int main (void) { return 1; } And here's macros.h: #ifndef __JUST_TESTING__ #define __JUST_TESTING__ template<typename T> void swap (T& pT1, T& pT2) { T pTmp = pT1; pT1 = pT2; pT2 = pTmp; } #endif //__JUST_TESTING__ This compiles and works just fine if both files are in the same directory. HOWEVER, if I put macros.h in /usr/include/gfc2 (it's part of a custom library I use) and change the #include in test.cpp, compilation fails with this error : /usr/include/gfc2/macros.h:4: error: template with C linkage I researched that error and most of the comments point to a "dangling extern C", which doesn't seem to be the case at all. I'm at a complete loss here. Is g++ for some reason assuming everything in /usr/include/gfc2 is C even though it's included from a .cpp file that doesn't say extern "C" anywhere? Any ideas? EDIT : It does compile if I use the full path in the #include, ie #include "/usr/include/gfc2/macros.h" EDIT2 : It's not including the wrong header. I've verified this using cpp, g++ -E, and renaming macros.h to foobarmacros.h

  Read the article

• Periodically iterating over a collection that's constantly changing

  - by rwmnau

  I have a collection of objects that's constantly changing, and I want to display some information about objects (my application is multi-threaded, and differently threads are constantly submitting requests to modify an object in the collection, so it's unpredictable), and I want to display some information about what's currently in the collection. If I lock the collection, I can iterate over it and get my information without any problems - however, this causes problems with the other threads, since they could have submitted multiple requests to modify the collection in the meantime, and will be stalled. I've thought of a couple ways around this, and I'm looking for any advice. Make a copy of the collection and iterate over it, allowing the original to continue updating in the background. The collection can get large, so this isn't ideal, but it's safe. Iterate over it using a For...Next loop, and catch an IndexOutOfBounds exception if an item is removed from the collection while we're iterating. This may occasionally cause duplicates to appear in my snapshot, so it's not ideal either. Any other ideas? I'm only concerned about a moment-in-time snapshot, so I'm not concerned about reflecting changes in my application - my main concern is that the collection be able to be updated with minimal latency, and that updates never be lost.

  Read the article

• Nested IF statements in Excel [Over the 7 allowed limit]

  - by Alks

  hey guys, i am trying to create a spreadsheet which automagically gives a grade to a student based on their marks they got. I've apparently hit excels nested IF statement limit which is 7. here's my if statement: =IF(O5>0.895,"A+",IF(O5>0.845,"A",IF(O5>0.795,"A-",IF(O5>0.745,"B+",IF(O5>0.695,"B",IF(O5>0.645,"B-",IF(O5>0.595,"C+",IF(O5>0.545,"C","D")))))))) I was reading online that I could create a VBA script and assign it that, but I dont know anything about VBA....so if someone could help me write a VBA for this, would be awesome. Its still mising the C- grade and anything lower should be awarded a D mark. This is the grading scheme I am trying to create...: A+ 89.500 - 100.000 Pass with Distinction A 84.500 - 89.490 Pass with Distinction A- 79.500 - 84.490 Pass with Distinction B+ 74.500 - 79.490 Pass with Merit B 69.500 - 74.490 Pass with Merit B- 64.500 - 69.490 Pass with Merit C+ 59.500 - 64.490 Pass C 54.500 - 59.490 Pass C- 49.500 - 54.490 Pass D 0.000 - 49.490 Specified Fail I wouldn't mind going down the VBA route, however my understanding of VB language is absolutely minimal (don't like it)...if this gets too tedious, I was thinking to create a small php/mysql application instead. Cheers :)

  Read the article

• Simulate stochastic bipartite network based on trait values of species - in R

  - by Scott Chamberlain

  I would like to create bipartite networks in R. For example, if you have a data.frame of two types of species (that can only interact across species, not within species), and each species has a trait value (e.g., size of mouth in the predator allows who gets to eat which prey species), how do we simulate a network based on the traits of the species (that is, two species can only interact if their traits overlap in values for instance)? UPDATE: Here is a minimal example of what I am trying to do. 1) create phylogenetic tree; 2) simulate traits on the phylogeny; 3) create networks based on species trait values. # packages install.packages(c("ape","phytools")) library(ape); library(phytools) # Make phylogenetic trees tree_predator <- rcoal(10) tree_prey <- rcoal(10) # Simulate traits on each tree trait_predator <- fastBM(tree_predator) trait_prey <- fastBM(tree_prey) # Create network of predator and prey ## This is the part I can't do yet. I want to create bipartite networks, where ## predator and prey interact based on certain crriteria. For example, predator ## species A and prey species B only interact if their body size ratio is ## greater than X.

  Read the article

• Make joomla blog link to inner pages(or blog roll post actual)

  - by somdow

  So i was told to create a blog for client in Joomla and, i have minimal knowledge of Joomla inner workings. I made the blog as seen here http://www.assurancepower.com/about-us/blog.html But the problem is that, the headers/titles for each story in that blog roll cant be clicked. Im wondering is there a way i can make this happen? Essentially this page is a collection of the stories and i want to be able to click on a particular one (any of them) and be taken to its inner page/full version of the story. Not exactly sure what im supposed to do/search for. Im not sure if joomla has a wordpress like functions.php or for example, is there somewhere i can instert a....maybe something like how wordpress does it with permalinks like so: <?php permalink(); ?> //title link here to the actual story. or something like <?php bloginfo('url');?>// this relative link for WP. Etc, All i want is to be able to have these titles in this story be active links to their full counterpart. Not sure what to look for/how to go about fixing this. Thanks in advanced.

  Read the article

• How to avoid concurrent execution of a time-consuming task without blocking?

  - by Diego V

  I want to efficiently avoid concurrent execution of a time-consuming task in a heavily multi-threaded environment without making threads wait for a lock when another thread is already running the task. Instead, in that scenario, I want them to gracefully fail (i.e. skip its attempt to execute the task) as fast as possible. To illustrate the idea considerer this unsafe (has race condition!) code: private static boolean running = false; public void launchExpensiveTask() { if (running) return; // Do nothing running = true; try { runExpensiveTask(); } finally { running = false; } } I though about using a variation of Double-Checked Locking (consider that running is a primitive 32-bit field, hence atomic, it could work fine even for Java below 5 without the need of volatile). It could look like this: private static boolean running = false; public void launchExpensiveTask() { if (running) return; // Do nothing synchronized (ThisClass.class) { if (running) return; running = true; try { runExpensiveTask(); } finally { running = false; } } } Maybe I should also use a local copy of the field as well (not sure now, please tell me). But then I realized that anyway I will end with an inner synchronization block, that still could hold a thread with the right timing at monitor entrance until the original executor leaves the critical section (I know the odds usually are minimal but in this case we are thinking in several threads competing for this long-running resource). So, could you think in a better approach?

  Read the article

• Accepting a socket on Windows 7 takes more than a second

  - by eburger

  Here's what I've done: I wrote a minimal web server (using Qt, but I don't think it's relevant here). I'm running it on a legal Windows 7 32-bit. The problem: If I make a request with Firefox, IE, Chrome or Safari it takes takes about one second before my server sees that there is a new connection to be accepted. Clues: Using other clients (wget, own test client that just opens a socket) than Firefox, IE, Chrome, Safari seeing the new connection is matter of milliseconds. I installed Apache and tried the clients mentioned above. Serving the request takes ~50ms as expected. The problem isn't reproducible when running Windows XP (or compiling and running the same code under Linux) The problem seems to present itself only when connecting to localhost. A friend connected over the Internet and serving the connection was a matter of milliseconds. Running the server in different ports has no effect on the 1 second latency Here's what I've tried without luck: Stopped the Windows Defender service Stopped the Windows Firewall service Any ideas? Is this some clever 'security feature' in Windows 7? Why isn't Apache affected? Why are only the browsers affected?

  Read the article

• jQuery fade li elemet and cycle it when mouse hovered.

  - by Pennf0lio

  I'm trying to recreate an effect in jQuery, where an element(<li> <img>) will be cycled and has a fading effect when hovered. The '<li>' contains '<img>' (image screenshots). when the mouse is on top of element it will keep cycling all that are in '<ul>' with a fading effect. when the mouse is away it will stop cycling the list. I also want to add a pager where you can navigate to the list. My Existing Code: link text My Problem: The current code has some problem with the pagination, it added all images that can be seen on the code. instead of 1-8 only, it continued to add another 1-8 and another. Second problem is, It also start cycling and fading when the page loads. The cycling and fading should only be working when the mouse is on top of the element. I don't know if the 'Cycle Plugin' is really required on this approach, I wan't it to be minimal as much as possible. I just use 'Cycle Plugin' because it's a quick answer to my problem. The effect i'm trying to achieve: link text (WARNING: Contains some Pornography), Sorry of my example, I tried finding other alternative but no luck. Thanks and merry xmas!

  Read the article

• Database (and ORM) choice for an small-medium size .NET Application

  - by jim

  I have a requirement to develop a .NET-based application whose data requirements are likely to exceed the 4 gig limit of SQL 2005 Express Edition. There may be other customers of the same application (in the future) with a requirement to use a specific DB platform (such as Oracle or SQL Server) due to in-house DBA expertise. Questions What RDBMS would you guys recommend? From the looks of it the major choices are PostGreSQL, MySQL or FireBird. I've only got experience of MYSQL from these. Which ORM tool (if any) would you recommend using - ideally one that can be swapped out between DB platforms with minimal effort? I like the look of the entity framework but unsure as to the degree to which platforms other than SQL Server are supported. If it helps, we'll be using the 3.5 version of the Framework. I'm open to the idea of using a tool such as NHibernate. On the other hand, if it's going to be easier, I'm happy to write my own stored procedures / DAL code - there won't be that many tables (perhaps 30-35).

  Read the article

• Template access of symbol in unnamed namespace

  - by Fred Larson

  We are upgrading our XL C/C++ compiler from V8.0 to V10.1 and found some code that is now giving us an error, even though it compiled under V8.0. Here's a minimal example: test.h: #include <iostream> #include <string> template <class T> void f() { std::cout << TEST << std::endl; } test.cpp: #include <string> #include "test.h" namespace { std::string TEST = "test"; } int main() { f<int>(); return 0; } Under V10.1, we get the following error: "test.h", line 7.16: 1540-0274 (S) The name lookup for "TEST" did not find a declaration. "test.cpp", line 6.15: 1540-1303 (I) "std::string TEST" is not visible. "test.h", line 5.6: 1540-0700 (I) The previous message was produced while processing "f<int>()". "test.cpp", line 11.3: 1540-0700 (I) The previous message was produced while processing "main()". We found a similar difference between g++ 3.3.2 and 4.3.2. I also found in g++, if I move the #include "test.h" to be after the unnamed namespace declaration, the compile error goes away. So here's my question: what does the Standard say about this? When a template is instantiated, is that instance considered to be declared at the point where the template itself was declared, or is the standard not that clear on this point? I did some looking though the n2461.pdf draft, but didn't really come up with anything definitive.

  Read the article

• How to document an existing small web site (web application), inside and out?

  - by Ricket

  We have a "web application" which has been developed over the past 7 months. The problem is, it was not really documented. The requirements consisted of a small bulleted list from the initial meeting 7 months ago (it's more of a "goals" statement than software requirements). It has collected a number of features which stemmed from small verbal or chat discussions. The developer is leaving very soon. He wrote the entire thing himself and he knows all of the quirks and underlying rules to each page, but nobody else really knows much more than the user interface side of it; which of course is the easy part, as it's made to be intuitive to the user. But if someone needs to repair or add a feature to it, the entire thing is a black box. The code has some minimal comments, and of course the good thing about web applications is that the address bar points you in the right direction towards fixing a problem or upgrading a page. But how should the developer go about documenting this web application? He is a bit lost as far as where to begin. As developers, how do you completely document your web applications for other developers, maintainers, and administrative-level users? What approach do you use, where do you start, do you have a template? An idea of magnitude: it uses PHP, MySQL and jQuery. It has about 20-30 main (frontend) files, along with about 15 included files and a couple folders of some assets. So overall it's a pretty small application. It interfaces with 7 MySQL tables, each one well-named, so I think the database end is pretty self-explanatory. There is a config.inc.php file with definitions of consts like the MySQL user details, some from/to emails, and URLs which PHP uses to insert into emails and pages (relative and absolute paths, basiecally). There is some AJAX via jQuery. Please comment if there is any other information that would help you help me and I will be glad to edit it in.

  Read the article

• Trouble getting QMainWindow to scroll

  - by random

  A minimal example: class MainWindow(QtGui.QMainWindow): def __init__(self, parent = None): QtGui.QMainWindow.__init__(self, parent) winWidth = 683 winHeight = 784 screen = QtGui.QDesktopWidget().availableGeometry() screenCenterX = (screen.width() - winWidth) / 2 screenCenterY = (screen.height() - winHeight) / 2 self.setGeometry(screenCenterX, screenCenterY, winWidth, winHeight) layout = QtGui.QVBoxLayout() layout.addWidget(FormA()) mainWidget = QtGui.QWidget() mainWidget.setLayout(layout) self.setCentralWidget(mainWidget) FormA is a QFrame with a VBoxLayout that can expand to an arbitrary number of entries. In the code posted above, if the entries in the forms can't fit in the window then the window itself grows. I'd prefer for the window to become scrollable. I've also tried the following... replacing mainWidget = QtGui.QWidget() mainWidget.setLayout(layout) self.setCentralWidget(mainWidget) with mainWidget = QtGui.QScrollArea() mainWidget.setLayout(layout) self.setCentralWidget(mainWidget) results in the forms and entries shrinking if they can't fit in the window. Replacing it with mainWidget = QtGui.QWidget() mainWidget.setLayout(layout) scrollWidget = QtGui.QScrollArea() scrollWidget.setWidget(mainWidget) self.setCentralWidget(scrollWidget) results in the mainwidget (composed of the forms) being scrunched in the top left corner of the window, leaving large blank areas on the right and bottom of it, and still isn't scrollable. I can't set a limit on the size of the window because I wish for it to be resizable. How can I make this window scrollable?

  Read the article

• What type of data store should I use for my ios app?

  - by mwiederrecht

  I am pretty new to ios and using servers so forgive me. I am building an ios app for research. I need to monitor things that the user does and then push it up to a server for analysis (yes, with user and IRB permission). On the client's side I need to keep quite a bit of data that won't really change except in the case of pulling an updated version from the server, and then a minimal amount of user-specific data. Most of the data I will collect needs to be pushed to a server for analysis and then can be deleted from the client side. I am struggling to figure out what kind of data store I need to use, especially since I am not quite sure how the pushing and pulling from the server process works yet. Does it make sense to use Core Data? XML? SQLite? I like the Core Data idea, but I am not sure what kind of problems I will run into when I need to send large amounts of data to it and from it from the server. I imagine I might need to send data in a different form than it is probably stored in on either end - so what kind of overhead am I likely to run into in the process of converting that data? Is there a good format to save stuff in that would work well for me on both ends AND for sending the data? As you can probably tell, I could use some advice. Thanks!

  Read the article

• Why isn't the pathspec magic :(exclude) excluding the files I specify from git log's output?

  - by Jubobs

  This is a follow-up to Ignore files in git log -p and is also related to Making 'git log' ignore changes for certain paths. I'm using Git 1.9.2. I'm trying to use the pathspec magic :(exclude) to specify that some patches should not be shown in the output of git log -p. However, patches that I want to exclude still show up in the output. Here is minimal working example that reproduces the situation: cd ~/Desktop mkdir test_exclude cd test_exclude git init mkdir testdir echo "my first cpp file" >testdir/test1.cpp echo "my first xml file" >testdir/test2.xml git add testdir/ git commit -m "added two test files" Now I want to show all patches in my history expect those corresponding to XML files in the testdir folder. Therefore, following VonC's answer, I run git log --patch -- . ":(exclude)testdir/*.xml" but the patch for my testdir/test2.xml file still shows up in the output: commit 37767da1ad4ad5a5c902dfa0c9b95351e8a3b0d9 Author: xxxxxxxxxxxxxxxxxxxxxxxxx Date: Mon Aug 18 12:23:56 2014 +0100 added two test files diff --git a/testdir/test1.cpp b/testdir/test1.cpp new file mode 100644 index 0000000..3a721aa --- /dev/null +++ b/testdir/test1.cpp @@ -0,0 +1 @@ +my first cpp file diff --git a/testdir/test2.xml b/testdir/test2.xml new file mode 100644 index 0000000..8b7ce86 --- /dev/null +++ b/testdir/test2.xml @@ -0,0 +1 @@ +my first xml file What am I doing wrong? What should I do to tell git log -p not to show the patch associated with all XML files in my testdir folder?

  Read the article

• Manipulate method functionality call

  - by danrichardson

  Hello, is it possibly in c# to have some sort of base class functionality which is manipulated slightly based on the class. For instance say i have the following code (which will quite obviously not compile it's meant to only be for demonstrative purposes) class BaseFunctionality { public virtual bool adminCall public static string MethodName(int id, string parameter) { if (adminCall) return dbcall.Execute(); else return dbcall.ExecuteMe(); } } class Admin : BaseFunctionality { override bool adminCall = true; } class Front : BaseFunctionality { override bool adminCall = false; } Now what i would like to be able to do is; string AdminCall = Admin.MethodName(1, "foo"); string FrontCall = Front.MethodName(2, "bar"); Is their any way to do something like this? I'm trying to do everything with static methods so i do not have to instantiate classes all the time, and have nice clean code which is only being manipulated in one place. The idea behind this is so that there is minimal code repeating and makes things easier to expand on, so for instance another class could implement the BaseFunctionality later on. Thanks Dan

  Read the article

• Clustered Graphs Visualization Techniques

  - by jameszhao00

  I need to visualize a relatively large graph (6K nodes, 8K edges) that has the following properties: Distinct Clusters. Approximately 50-100 Nodes per cluster and moderate interconnectivity at the cluster level Minimal (5-10 inter-cluster edges per cluster) interconnectivity between clusters Let global edge overlap = The edge overlaps caused by directly visualizing a graph of Clusters = {A, B, C, D, E}, Edges = {Pentagram of those clusters, which is non-planar by the way and will definitely generate edge overlap if you draw it out directly} Let Local Edge Overlap = the above but { A, B, C, D, E } are just nodes. I need to visualize graphs with the above in a way that satisfies the following requirements No global edge overlap (i.e. edge overlaps caused by inter-cluster properties is not okay) Local edge overlap within a cluster is fine Anyone have thoughts on how to best visualize a graph with the requirements above? One solution I've come up with to deal with the global edge overlap is to make sure a cluster A can only have a max of 1 direct edge to another cluster (B) during visualization. Any additional inter-cluster edges between cluster A - C, A - D, ... are disconnected and additional node/edges A - A_C, C - C_A, A - A_D, D - D_A... are created. Anyone have any thoughts?

  Read the article

• Tools for Automated Source Code Editing

  - by Steve

  I'm working on a research project to automatically modify code to include advanced mathematical concepts (like adding random effects into a loop or encapsulating an existing function with a new function that adds in a more advanced physical model). My question to the community is: are there are any good tools for manipulating source code directly? I want to do things like Swap out functions Add variable declarations wherever they are required Determine if a function is multiplied by anything Determine what functions are called on a line of code See what parameters are passed to a function and replace them with alternatives Introduce new function calls on certain lines of code Wherever possible just leaving the rest of the code untouched and write out the results I never want to actually compile the code I only want to understand what symbols are used, replace and add in a syntactically correct way, and be able to declare variables at the right position. I've been using a minimal flex/bison approach with some success but I do not feel the it is robust. I hate to take on writing a full language parser just to add some new info to the end of a line or the top of a function. It seems like this is almost what is going to be required but it also seems like there should be some tools out there to do these types of manipulations already. The code to be changed is in a variety of languages, but I'm particularly interested in FORTRAN. Any thoughts?

  Read the article

• Abstract Design Pattern implementation

  - by Pathachiever11

  I started learning design patterns a while ago (only covered facade and abstract so far, but am enjoying it). I'm looking to apply the Abstract pattern to a problem I have. The problem is: Supporting various Database systems using one abstract class and a set of methods and properties, which then the underlying concrete classes (inheriting from abstract class) would be implementing. I have created a DatabaseWrapper abstract class and have create SqlClientData and MSAccessData concrete class that inherit from the DatabaseWrapper. However, I'm still a bit confused about how the pattern goes as far as implementing these classes on the Client. Would I do the following?: DatabaseWrapper sqlClient = new SqlClientData(connectionString); This is what I saw in an example, but that is not what I'm looking for because I want to encapsulate the concrete classes; I only want the Client to use the abstract class. This is so I can support for more database systems in the future with minimal changes to the Client, and creating a new concrete class for the implementations. I'm still learning, so there might be a lot of things wrong here. Please tell me how I can encapsulate all the concrete classes, and if there is anything wrong with my approach. Many Thanks! PS: I'm very excited to get into software architecture, but still am a beginner, so take it easy on me. :)

  Read the article

• Emacs - nxhtml-mode - memory full

  - by mbutz

  working with nxhtml-mode in emacs, I get problems since a few weeks. While working emacs pauses unexpectingly until showing a message in the mode line "!MEM FULL!"; obviously nxhtml-mode is filling up the memory until emacs stopps to work. I am working with html, php and css files. I have no idea how I could debug this problem in a meaningfull way. Also I seem to be the only one to have this problem, because googling did not deliver any answers to this question. I am using emacs 2.32 on an Linux Mint 11 system. I can not find out the verson of nxhtml, it says revision 829 downloaded from http://bazaar.launchpad.net/~nxhtml/nxhtml/main/revision/829. I set up a test scenario with a minimal dot-emacs just to test the nxhtml-mode. It seemed to be alright, but it does not reflect my productive set up. It would probably take a week or so to gradually include everything I used to use within emacs (e.g. org-mode) while testing whether nxhtml-mode does not like anything, which is called in my dot-emacs file. Is there another way? Can I find out, what causes the memory overload? Does anyone has similar problems using nxhtml-mode? Greetings Martin

  Read the article

• Extending the CI_DB_active_record class in codeigniter 2.0

  - by ctrane

  I am writing my first program with Codeigniter, and have run into a problem. I will start with a focused description of the problem and can broaden it if I need to: I need to write a multi-dimensional array to the DB and want to use the insert_batch function from the CI_DB_active_record class to do so. The problem is that I need to write empty values as NULL for some fields while other fields need to be empty strings. The current function wraps all values with single quotes, and I cannot find a way to write null values to the database for specified fields. I would also like to increase the number of records per batch. I see how to extend models, libraries, etc., but is there a way to extend the CI_DB_active_record class without modifying core classes? The minimal amount of core class modification to make this work that I have found is modifying the following lines in the DB.php file (changing the require_once file to the new file that extends the CI_DB_active_record class and changing the CI_DB_active_record class name to the new class name): require_once(BASEPATH.'database/DB_active_rec'.EXT); if ( ! class_exists('CI_DB')) { eval('class CI_DB extends CI_DB_active_record { }'); } Can I do better?

  Read the article

• .NET List Thread-Safe Implementation Suggestion needed

  - by Bamboo

  .Net List class isn't thread safe. I hope to achieve the minimal lock needed and yet still fulfilling the requirement such that as for reading, phantom record is allowed, and for writing, they must be thread-safe so there won't be any lost updates. So I have something like public static List<string> list = new List<string>(); In Methods that have **List.Add**/**List.Remove** , I always lock to assure thread safety lock (lockHelper) { list.Add(obj); or list.Remove(obj); } In Methods that requires **List Reading** I don't care about phantom record so I go ahead to read without any locking. In this case. Return a bool by checking whether a string had been added. if (list.Count() != 0) { return list.Contains("some string") } All I did was locking write accesses, and allow read accesses to go through without any locking. Is my thread safety idea valid? I understand there is List size expansion. Will it be ok? My guess is that when a List is expanding, it may uses a temp. list. This is ok becasue the temp list size will always have a boundary, and .Net class is well implemented, ie. there shouldn't be any indexOutOfBound or circular reference problems when reading was caught in updates.

  Read the article

• Parallelizing for loop

  - by vman049

  I have MATLAB code which I'm trying to parallelize with a simple change from "for" to "parfor." I'm unable to do so because of an error I'm receiving on the variable "votes" which states: Valid indices for 'votes' are restricted in PARFOR loops. Explanation: For MATLAB to execute parfor loops efficiently, the amount of data sent to the MATLAB workers must be minimal. One of the ways MATLAB achieves this is by restricting the way variables can be indexed in parfor iterations. The indicated variable is indexed in a way that is incompatible with parfor. Suggested Action: Fix the indexing. For a description of the indexing restrictions, see “Sliced Variables” in the Parallel Computing Toolbox documentation. Below is my code: votes = zeros(num_layers, size(spikes, 1), size(SVMs_layer1, 1)); predDir = zeros(size(spikes, 1), 1); chronProb = zeros([num_layers, size(chronDists)]); for i = 1:num_layers switch i case 1 B = B1; k_elem_temp = k_elem1; rest_elem_temp = rest_elem1; case 2 B = B2; k_elem_temp = k_elem2; rest_elem_temp = rest_elem2; case 3 B = B3; k_elem_temp = k_elem3; rest_elem_temp = rest_elem3; end for j = 1:length(chronPred) if chronDists(i, j, :) ~= 0 parfor k = 1:8 chronProb(i, j, k) = logistic(B{k}(1) + chronDists(i, j, k).*(B{k}(2))); votes(i, j, k_elem_temp(k, :)) = votes(i, j, k_elem_temp(k, :)) + chronProb(i, j, k)/num_k(i)/num_layers; votes(i, j, rest_elem_temp(k, :)) = votes(i, j, rest_elem_temp(k, :)) + (1 - chronProb(i, j, k))/num_rest(i)/num_layers; end end end end Do you have any suggestions as to how I could adjust my code so that it runs in parallel? Thank you!

  Read the article

• Weird CSS behavior... removing a 1px border makes <DIV> move about 20px

  - by John

  I have the following: CSS #pageBody { height: 500px; padding:0; margin:0; /*border: 1px solid #00ff00;*/ } #pageContent { height:460px; margin-left:35px; margin-right:35px; margin-top:30px; margin-bottom:30px; padding:0px 0 0 0; } HTML <div id="pageBody"> <div id="pageContent"> <p> blah blah blah </p> </div> </div> </div> If I uncomment the border line in pageBody, everything fits sweetly... I had the border on to verify things were as expected. But removing the border, pageBody drops down the page about 20px, while pageContent does not appear to move at all. Now this is not the real page, but a subset. If nothing's obvious I can attempt to generate a working minimal sample, but I thought there might be an easy quick answer first. I see the same exact problem in Chrome and IE8, suggesting it's me not the browser. Any tips where to look? I wondered maybe the 1px border was some tipping point making the contents of a div just too big, but changing #pageContent height to e.g 400 makes no difference, other than clipping the bottom off that div.

  Read the article

• limiting mysql results by range of a specific key INCLUDING DUPLICATES

  - by aVC

  I have a query SELECT p.*, m.*, (SELECT COUNT(*) FROM newPhotoonAlert n WHERE n.userIDfor='$id' AND n.threadID=p.threadID and n.seen='0') AS unReadCount FROM posts p JOIN myMembers m ON m.id = p.user_id LEFT JOIN following f ON (p.user_id = f.user_id AND f.follower_id='$id' AND f.request='0' AND f.status='1') JOIN myMembers searcher ON searcher.id = '$id' WHERE ((f.follower_id = searcher.id) OR m.id='$id') AND p.flagged <'5' ORDER BY p.threadID DESC,p.positionID It brings result as expected but I want to add Another CLAUSE to limit the results. Say a sample (minimal shown) set of data looks like this with the above query. threadID postID positionID url 564 1254 2 a.com 564 1245 1 a1.com 541 1215 3 b1.com 541 1212 2 b2.com 541 1210 1 b3.com 523 745 1 c1.com 435 689 2 d2.com 435 688 1 a4.com 256 345 1 s3.com 164 316 1 f1.com . . I want to get ROWS corresponding to 2 DISTINCT threadIDs starting from MAX, but I want to include duplicates as well. Something like AND p.threadID IN (Select just Two of all threadIDs currently selected, but include duplicate rows) So my result should be threadID postID positionID url 564 1254 2 a.com 564 1245 1 a1.com 541 1215 3 b1.com 541 1212 2 b2.com 541 1210 1 b3.com

  Read the article

• Template function overloading with identical signatures, why does this work?

  - by user1843978

  Minimal program: #include <stdio.h> #include <type_traits> template<typename S, typename T> int foo(typename T::type s) { return 1; } template<typename S, typename T> int foo(S s) { return 2; } int main(int argc, char* argv[]) { int x = 3; printf("%d\n", foo<int, std::enable_if<true, int>>(x)); return 0; } output: 1 Why doesn't this give a compile error? When the template code is generated, wouldn't the functions int foo(typename T::type search) and int foo(S& search) have the same signature? If you change the template function signatures a little bit, it still works (as I would expect given the example above): template<typename S, typename T> void foo(typename T::type s) { printf("a\n"); } template<typename S, typename T> void foo(S s) { printf("b\n"); } Yet this doesn't and yet the only difference is that one has an int signature and the other is defined by the first template parameter. template<typename T> void foo(typename T::type s) { printf("a\n"); } template<typename T> void foo(int s) { printf("b\n"); } I'm using code similar to this for a project I'm working on and I'm afraid that there's a subtly to the language that I'm not understanding that will cause some undefined behavior in certain cases. I should also mention that it does compile on both Clang and in VS11 so I don't think it's just a compiler bug.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >