Search Results

Search found 1474 results on 59 pages for 'minimal'.

Page 49/59 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Share a Printer on Your Network from Vista or XP to Windows 7

  - by Mysticgeek

  The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Cannot install mysql-server (5.5.22) on clean ubuntu 12.04 LTS server

  - by Christian

  I have a clean minimal install of Ubuntu 12.04 LTS server 64-bit (just a root user and nothing alse installed). I tried to install the mysql-server with the following command: apt-get install mysql-server The installation aborts with the following error: The following NEW packages will be installed: libdbd-mysql-perl{a} libmysqlclient18{a} mysql-client mysql-client-5.5{a} mysql-client-core-5.5{a} mysql-common{a} mysql-server mysql-server-5.5{a} mysql-server-core-5.5{a} 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 11.7 kB/26.2 MB of archives. After unpacking 94.5 MB will be used. Do you want to continue? [Y/n/?] y Get: 1 http://mirror.eu.oneandone.net/ubuntu/ubuntu/ precise/main mysql-client all 5.5.22-0ubuntu1 [11.7 kB] Fetched 11.7 kB in 0s (567 kB/s) Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 54008 files and directories currently installed.) Unpacking mysql-common (from .../mysql-common_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package libmysqlclient18. Unpacking libmysqlclient18 (from .../libmysqlclient18_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package libdbd-mysql-perl. Unpacking libdbd-mysql-perl (from .../libdbd-mysql-perl_4.020-1build2_amd64.deb) ... Selecting previously unselected package mysql-client-core-5.5. Unpacking mysql-client-core-5.5 (from .../mysql-client-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client-5.5. Unpacking mysql-client-5.5 (from .../mysql-client-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-server-core-5.5. Unpacking mysql-server-core-5.5 (from .../mysql-server-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Processing triggers for man-db ... Setting up mysql-common (5.5.22-0ubuntu1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 54189 files and directories currently installed.) Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up libmysqlclient18 (5.5.22-0ubuntu1) ... Setting up libdbd-mysql-perl (4.020-1build2) ... Setting up mysql-client-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-client-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... 120502 10:17:41 [Note] Plugin 'FEDERATED' is disabled. 120502 10:17:41 InnoDB: The InnoDB memory heap is disabled 120502 10:17:41 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120502 10:17:41 InnoDB: Compressed tables use zlib 1.2.3.4 120502 10:17:41 InnoDB: Initializing buffer pool, size = 128.0M 120502 10:17:41 InnoDB: Completed initialization of buffer pool 120502 10:17:41 InnoDB: highest supported file format is Barracuda. 120502 10:17:41 InnoDB: Waiting for the background threads to start 120502 10:17:42 InnoDB: 1.1.8 started; log sequence number 1595675 120502 10:17:42 InnoDB: Starting shutdown... 120502 10:17:42 InnoDB: Shutdown completed; log sequence number 1595675 start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up mysql-client (5.5.22-0ubuntu1) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.5 mysql-server I am completely lost because I have tried everything on the web to solve my problem (clearning the install, reconfiguring with dpkg, manually editing the my.cnf). I also set up a new clean install but nothing helped. What am I doing wrong? New information: The file /var/log/upstart/mysql.log contains the following error after the installation: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/tunables/global at line 17: Could not open 'tunables/proc'

  Read the article

• New Product: Oracle Java ME Embedded 3.2 – Small, Smart, Connected

  - by terrencebarr

  The Internet of Things (IoT) is coming. And, with todays launch of the Oracle Java ME Embedded 3.2 product, Java is going to play an even greater role in it. Java in the Internet of Things By all accounts, intelligent embedded devices are penetrating the world around us – driving industrial processes, monitoring environmental conditions, providing better health care, analyzing and processing data, and much more. And these devices are becoming increasingly connected, adding another dimension of utility. Welcome to the Internet of Things. As I blogged yesterday, this is a huge opportunity for the Java technology and ecosystem. To enable and utilize these billions of devices effectively you need a programming model, tools, and protocols which provide a feature-rich, consistent, scalable, manageable, and interoperable platform.  Java technology is ideally suited to address these technical and business problems, enabling you eliminate many of the typical challenges in designing embedded solutions. By using Java you can focus on building smarter, more valuable embedded solutions faster. To wit, Java technology is already powering around 10 billion devices worldwide. Delivering on this vision and accelerating the growth of embedded Java solutions, Oracle is today announcing a brand-new product: Oracle Java Micro Edition (ME) Embedded 3.2, accompanied by an update release of the Java ME Software Development Kit (SDK) to version 3.2. What is Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a complete Java runtime client, optimized for ARM architecture connected microcontrollers and other resource-constrained systems. The product provides dedicated embedded functionality and is targeted for low-power, limited memory devices requiring support for a range of network services and I/O interfaces.  What features and APIs are provided by Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228). The runtime and virtual machine (VM) are highly optimized for embedded use. Also included in the product are the following optional JSRs and Oracle APIs: File I/O API’s (JSR-75)  Wireless Messaging API’s (JSR-120) Web Services (JSR-172) Security and Trust Services subset (JSR-177) Location API’s (JSR-179) XML API’s (JSR-280)  Device Access API Application Management System (AMS) API AccessPoint API Logging API Additional embedded features are: Remote application management system Support for continuous 24×7 operation Application monitoring, auto-start, and system recovery Application access to peripheral interfaces such as GPIO, I2C, SPIO, memory mapped I/O Application level logging framework, including option for remote logging Headless on-device debugging – source level Java application debugging over IP Connection Remote configuration of the Java VM What type of platforms are targeted by Oracle Java ME 3.2 Embedded? The product is designed for embedded, always-on, resource-constrained, headless (no graphics/no UI), connected (wired or wireless) devices with a variety of peripheral I/O.  The high-level system requirements are as follows: System based on ARM architecture SOCs Memory footprint (approximate) from 130 KB RAM/350KB ROM (for a minimal, customized configuration) to 700 KB RAM/1500 KB ROM (for the full, standard configuration)  Very simple embedded kernel, or a more capable embedded OS/RTOS At least one type of network connection (wired or wireless) The initial release of the product is delivered as a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN).  What types of applications can I develop with Oracle Java ME Embedded 3.2? The Oracle Java ME Embedded 3.2 product is a full-featured embedded Java runtime supporting applications based on the IMP-NG application model, which is derived from the well-known MIDP 2 application model. The runtime supports execution of multiple concurrent applications, remote application management, versatile connectivity, and a rich set of APIs and features relevant for embedded use cases, including the ability to interact with peripheral I/O directly from Java applications. This rich feature set, coupled with familiar and best-in class software development tools, allows developers to quickly build and deploy sophisticated embedded solutions for a wide range of use cases. Target markets well supported by Oracle Java ME Embedded 3.2 include wireless modules for M2M, industrial and building control, smart grid infrastructure, home automation, and environmental sensors and tracking. What tools are available for embedded application development for Oracle Java ME Embedded 3.2? Along with the release of Oracle Java ME Embedded 3.2, Oracle is also making available an updated version of the Java ME Software Development Kit (SDK), together with plug-ins for the NetBeans and Eclipse IDEs, to deliver a complete development environment for embedded application development.  OK – sounds great! Where can I find out more? And how do I get started? There is a complete set of information, data sheet, API documentation, “Getting Started Guide”, FAQ, and download links available: For an overview of Oracle Embeddable Java, see here. For the Oracle Java ME Embedded 3.2 press release, see here. For the Oracle Java ME Embedded 3.2 data sheet, see here. For the Oracle Java ME Embedded 3.2 landing page, see here. For the Oracle Java ME Embedded 3.2 documentation page, including a “Getting Started Guide” and FAQ, see here. For the Oracle Java ME SDK 3.2 landing and download page, see here. Finally, to ask more questions, please see the OTN “Java ME Embedded” forum To get started, grab the “Getting Started Guide” and download the Java ME SDK 3.2, which includes the Oracle Java ME Embedded 3.2 device emulation.  Can I learn more about Oracle Java ME Embedded 3.2 at JavaOne and/or Java Embedded @ JavaOne? Glad you asked Both conferences, JavaOne and Java Embedded @ JavaOne, will feature a host of content and information around the new Oracle Java ME Embedded 3.2 product, from technical and business sessions, to hands-on tutorials, and demos. Stay tuned, I will post details shortly. Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "Oracle Java ME Embedded", Connected, embedded, Embedded Java, Java Embedded @ JavaOne, JavaOne, Smart

  Read the article

• Updating the managed debugging API for .NET v4

  - by Brian Donahue

  In any successful investigation, the right tools play a big part in collecting evidence about the state of the "crime scene" as it was before the detectives arrived. Unfortunately for the Crash Scene Investigator, we don't have the budget to fly out to the customer's site, chalk the outline, and eat their doughnuts. We have to rely on the end-user to collect the evidence for us, which means giving them the fingerprint dust and the evidence baggies and leaving them to it. With that in mind, the Red Gate support team have been writing tools that can collect vital clues with a minimum of fuss. Years ago we would have asked for a memory dump, where we used to get the customer to run CDB.exe and produce dumps that we could analyze in-house, but those dumps were pretty unwieldy (500MB files) and the debugger often didn't dump exactly where we wanted, or made five or more dumps. What we wanted was just the minimum state information from the program at the time of failure, so we produced a managed debugger that captured every first and second-chance exception and logged the stack and a minimal amount of variables from the memory of the application, which could all be exported as XML. This caused less inconvenience to the end-user because it is much easier to send a 65KB XML file in an email than a 500MB file containing all of the application's memory. We don't need to have the entire victim shipped out to us when we just want to know what was under the fingernails. The thing that made creating a managed debugging tool possible was the MDbg Engine example written by Microsoft as part of the Debugging Tools for Windows distribution. Since the ICorDebug interface is a bit difficult to understand, they had kindly created some wrappers that provided an event-driven debugging model that was perfect for our needs, but .NET 4 applications under debugging started complaining that "The debugger's protocol is incompatible with the debuggee". The introduction of .NET Framework v4 had changed the managed debugging API significantly, however, without an update for the MDbg Engine code! After a few hours of research, I had finally worked out that most of the version 4 ICorDebug interface still works much the same way in "legacy" v2 mode and there was a relatively easy fix for the problem in that you can still get a reference to legacy ICorDebug by changing the way the interface is created. In .NET v2, the interface was acquired using the CreateDebuggingInterfaceFromVersion method in mscoree.dll. In v4, you must first create IClrMetaHost, enumerate the runtimes, get an ICLRRuntimeInfo interface to the .NET 4 runtime from that, and use the GetInterface method in mscoree.dll to return a "legacy" ICorDebug interface. The rest of the MDbg Engine will continue working the old way. Here is how I had changed the MDbg Engine code to support .NET v4: private void InitFromVersion(string debuggerVersion){if( debuggerVersion.StartsWith("v1") ){throw new ArgumentException( "Can't debug a version 1 CLR process (\"" + debuggerVersion + "\"). Run application in a version 2 CLR, or use a version 1 debugger instead." );} ICorDebug rawDebuggingAPI=null;if (debuggerVersion.StartsWith("v4")){Guid CLSID_MetaHost = new Guid("9280188D-0E8E-4867-B30C-7FA83884E8DE"); Guid IID_MetaHost = new Guid("D332DB9E-B9B3-4125-8207-A14884F53216"); ICLRMetaHost metahost = (ICLRMetaHost)NativeMethods.ClrCreateInterface(CLSID_MetaHost, IID_MetaHost); IEnumUnknown runtimes = metahost.EnumerateInstalledRuntimes(); ICLRRuntimeInfo runtime = GetRuntime(runtimes, debuggerVersion); //Defined in metahost.hGuid CLSID_CLRDebuggingLegacy = new Guid(0xDF8395B5, 0xA4BA, 0x450b, 0xA7, 0x7C, 0xA9, 0xA4, 0x77, 0x62, 0xC5, 0x20);Guid IID_ICorDebug = new Guid("3D6F5F61-7538-11D3-8D5B-00104B35E7EF"); Object res;runtime.GetInterface(ref CLSID_CLRDebuggingLegacy, ref IID_ICorDebug, out res); rawDebuggingAPI = (ICorDebug)res; }elserawDebuggingAPI = NativeMethods.CreateDebuggingInterfaceFromVersion((int)CorDebuggerVersion.Whidbey,debuggerVersion);if (rawDebuggingAPI != null)InitFromICorDebug(rawDebuggingAPI);elsethrow new ArgumentException("Support for debugging version " + debuggerVersion + " is not yet implemented");} The changes above will ensure that the debugger can support .NET Framework v2 and v4 applications with the same codebase, but we do compile two different applications: one targeting v2 and the other v4. As a footnote I need to add that some missing native methods and wrappers, along with the EnumerateRuntimes method code, came from the Mindbg project on Codeplex. Another change is that when using the MDbgEngine.CreateProcess to launch a process in the debugger, do not supply a null as the final argument. This does not work any more because GetCORVersion always returns "v2.0.50727" as the function has been deprecated in .NET v4. What's worse is that on a system with only .NET 4, the user will be prompted to download and install .NET v2! Not nice! This works much better: proc = m_Debugger.CreateProcess(ProcessName, ProcessArgs, DebugModeFlag.Default,String.Format("v{0}.{1}.{2}",System.Environment.Version.Major,System.Environment.Version.Minor,System.Environment.Version.Build)); Microsoft "unofficially" plan on updating the MDbg samples soon, but if you have an MDbg-based application, you can get it working right now by changing one method a bit and adding a few new interfaces (ICLRMetaHost, IEnumUnknown, and ICLRRuntimeInfo). The new, non-legacy implementation of MDbg Engine will add new, interesting features like dump-file support and by association I assume garbage-collection/managed object stats, so it will be well worth looking into if you want to extend the functionality of a managed debugger going forward.

  Read the article

• Troubleshooting Application Timeouts in SQL Server

  - by Tara Kizer

  I recently received the following email from a blog reader: "We are having an OLTP database instance, using SQL Server 2005 with little to moderate traffic (10-20 requests/min). There are also bulk imports that occur at regular intervals in this DB and the import duration ranges between 10secs to 1 min, depending on the data size. Intermittently (2-3 times in a week), we face an issue, where queries get timed out (default of 30 secs set in application). On analyzing, we found two stored procedures, having queries with multiple table joins inside them of taking a long time (5-10 mins) in getting executed, when ideally the execution duration ranges between 5-10 secs. Execution plan of the same displayed Clustered Index Scan happening instead of Clustered Index Seek. All required Indexes are found to be present and Index fragmentation is also minimal as we Rebuild Indexes regularly alongwith Updating Statistics. With no other alternate options occuring to us, we restarted SQL server and thereafter the performance was back on track. But sometimes it was still giving timeout errors for some hits and so we also restarted IIS and that stopped the problem as of now." Rather than respond directly to the blog reader, I thought it would be more interesting to share my thoughts on this issue in a blog. There are a few things that I can think of that could cause abnormal timeouts: Blocking Bad plan in cache Outdated statistics Hardware bottleneck To determine if blocking is the issue, we can easily run sp_who/sp_who2 or a query directly on sysprocesses (select * from master..sysprocesses where blocking <> 0).  If blocking is present and consistent, then you'll need to determine whether or not to kill the parent blocking process.  Killing a process will cause the transaction to rollback, so you need to proceed with caution.  Killing the parent blocking process is only a temporary solution, so you'll need to do more thorough analysis to figure out why the blocking was present.  You should look into missing indexes and perhaps consider changing the database's isolation level to READ_COMMITTED_SNAPSHOT. The blog reader mentions that the execution plan shows a clustered index scan when a clustered index seek is normal for the stored procedure.  A clustered index scan might have been chosen either because that is what is in cache already or because of out of date statistics.  The blog reader mentions that bulk imports occur at regular intervals, so outdated statistics is definitely something that could cause this issue.  The blog reader may need to update statistics after imports are done if the imports are changing a lot of data (greater than 10%).  If the statistics are good, then the query optimizer might have chosen to scan rather than seek in a previous execution because the scan was determined to be less costly due to the value of an input parameter.  If this parameter value is rare, then its execution plan in cache is what we call a bad plan.  You want the best plan in cache for the most frequent parameter values.  If a bad plan is a recurring problem on your system, then you should consider rewriting the stored procedure.  You might want to break up the code into multiple stored procedures so that each can have a different execution plan in cache. To remove a bad plan from cache, you can recompile the stored procedure.  An alternative method is to run DBCC FREEPROCACHE which drops the procedure cache.  It is better to recompile stored procedures rather than dropping the procedure cache as dropping the procedure cache affects all plans in cache rather than just the ones that were bad, so there will be a temporary performance penalty until the plans are loaded into cache again. To determine if there is a hardware bottleneck occurring such as slow I/O or high CPU utilization, you will need to run Performance Monitor on the database server.  Hopefully you already have a baseline of the server so you know what is normal and what is not.  Be on the lookout for I/O requests taking longer than 12 milliseconds and CPU utilization over 90%.  The servers that I support typically are under 30% CPU utilization, but your baseline could be higher and be within a normal range. If restarting the SQL Server service fixes the problem, then the problem was most likely due to blocking or a bad plan in the procedure cache.  Rather than restarting the SQL Server service, which causes downtime, the blog reader should instead analyze the above mentioned things.  Proceed with caution when restarting the SQL Server service as all transactions that have not completed will be rolled back at startup.  This crash recovery process could take longer than normal if there was a long-running transaction running when the service was stopped.  Until the crash recovery process is completed on the database, it is unavailable to your applications. If restarting IIS fixes the problem, then the problem might not have been inside SQL Server.  Prior to taking this step, you should do analysis of the above mentioned things. If you can think of other reasons why the blog reader is facing this issue a few times a week, I'd love to hear your thoughts via a blog comment.

  Read the article

• Seven Worlds will collide…. High Availability BI is not such a Distant Sun.

  - by Testas

  Over the last 5 years I have observed Microsoft persevere with the notion of Self Service BI over a series of conferences as far back as SQLBits V in Newport. The release of SQL Server 2012, improvements in Excel and the integration with SharePoint 2010 is making this a reality. Business users are now empowered to create their own BI reports through a number of different technologies such as PowerPivot, PowerView and Report Builder. This opens up a whole new way of working; improving staff productivity, promoting efficient decision making and delivering timely business reports. There is, however; a serious question to answer. What happens should any of these applications become unavailable? More to the point, how would the business react should key business users be unable to fulfil reporting requests for key management meetings when they require it?  While the introduction of self-service BI will provide instant access to the creation of management information reports, it will also cause instant support calls should the access to the data become unavailable. These are questions that are often overlooked when a business evaluates the need for self-service BI. But as I have written in other blog posts, the thirst for information is unquenchable once the business users have access to the data. When they are unable to access the information, you will be the first to know about it and will be expected to have a resolution to the downtime as soon as possible. The world of self-service BI is pushing reporting and analytical databases to the tier 1 application level for some of Coeo’s customers. A level that is traditionally associated with mission critical OLTP environments. There is recognition that by making BI readily available to the business user, provisions also need to be made to ensure that the solution is highly available so that there is minimal disruption to the business. This is where High Availability BI infrastructures provide a solution. As there is a convergence of technologies to support a self-service BI culture, there is also a convergence of technologies that need to be understood in order to provide the high availability architecture required to support the self-service BI infrastructure. While you may not be the individual that implements these components, understanding the concepts behind these components will empower you to have meaningful discussions with the right people should you put this infrastructure in place. There are 7 worlds that you will have to understand to successfully implement a highly available BI infrastructure   1.       Server/Virtualised server hardware/software 2.       DNS 3.       Network Load Balancing 4.       Active Directory 5.       Kerberos 6.       SharePoint 7.       SQL Server I have found myself over the last 6 months reaching out to knowledge that I learnt years ago when I studied for the Windows 2000 and 2003 (MCSE) Microsoft Certified System Engineer. (To the point that I am resuming my studies for the Windows Server 2008 equivalent to be up to date with newer technologies) This knowledge has proved very useful in the numerous engagements I have undertaken since being at Coeo, particularly when dealing with High Availability Infrastructures. As a result of running my session at SQLBits X and SQL Saturday in Dublin, the feedback I have received has been that many individuals desire to understand more of the concepts behind the first 6 “worlds” in the list above. Over the coming weeks, a series of blog posts will be put on this site to help understand the key concepts of each area as it pertains to a High Availability BI Infrastructure. Each post will not provide exhaustive coverage of the topic. For example DNS can be a book in its own right when you consider that there are so many different configuration options with Forward Lookup, Reverse Lookups, AD Integrated Zones and DNA forwarders to name some examples. What I want to do is share the pertinent points as it pertains to the BI infrastructure that you build so that you are equipped with the knowledge to have the right discussion when planning this infrastructure. Next, we will focus on the server infrastructure that will be required to support the High Availability BI Infrastructure, from both a physical box and virtualised perspective. Thanks   Chris

  Read the article

• How to build Open JavaFX for Android.

  - by PictureCo

  Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business.  SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible  and also that certain APIs are missing comparing to good old java vm from Oracle.  Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation.  Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh  --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you.   Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

  Read the article

• Replication Services in a BI environment

  - by jorg

  In this blog post I will explain the principles of SQL Server Replication Services without too much detail and I will take a look on the BI capabilities that Replication Services could offer in my opinion. SQL Server Replication Services provides tools to copy and distribute database objects from one database system to another and maintain consistency afterwards. These tools basically copy or synchronize data with little or no transformations, they do not offer capabilities to transform data or apply business rules, like ETL tools do. The only “transformations” Replication Services offers is to filter records or columns out of your data set. You can achieve this by selecting the desired columns of a table and/or by using WHERE statements like this: SELECT <published_columns> FROM [Table] WHERE [DateTime] >= getdate() - 60 There are three types of replication: Transactional Replication This type replicates data on a transactional level. The Log Reader Agent reads directly on the transaction log of the source database (Publisher) and clones the transactions to the Distribution Database (Distributor), this database acts as a queue for the destination database (Subscriber). Next, the Distribution Agent moves the cloned transactions that are stored in the Distribution Database to the Subscriber. The Distribution Agent can either run at scheduled intervals or continuously which offers near real-time replication of data! So for example when a user executes an UPDATE statement on one or multiple records in the publisher database, this transaction (not the data itself) is copied to the distribution database and is then also executed on the subscriber. When the Distribution Agent is set to run continuously this process runs all the time and transactions on the publisher are replicated in small batches (near real-time), when it runs on scheduled intervals it executes larger batches of transactions, but the idea is the same. Snapshot Replication This type of replication makes an initial copy of database objects that need to be replicated, this includes the schemas and the data itself. All types of replication must start with a snapshot of the database objects from the Publisher to initialize the Subscriber. Transactional replication need an initial snapshot of the replicated publisher tables/objects to run its cloned transactions on and maintain consistency. The Snapshot Agent copies the schemas of the tables that will be replicated to files that will be stored in the Snapshot Folder which is a normal folder on the file system. When all the schemas are ready, the data itself will be copied from the Publisher to the snapshot folder. The snapshot is generated as a set of bulk copy program (BCP) files. Next, the Distribution Agent moves the snapshot to the Subscriber, if necessary it applies schema changes first and copies the data itself afterwards. The application of schema changes to the Subscriber is a nice feature, when you change the schema of the Publisher with, for example, an ALTER TABLE statement, that change is propagated by default to the Subscriber(s). Merge Replication Merge replication is typically used in server-to-client environments, for example when subscribers need to receive data, make changes offline, and later synchronize changes with the Publisher and other Subscribers, like with mobile devices that need to synchronize one in a while. Because I don’t really see BI capabilities here, I will not explain this type of replication any further. Replication Services in a BI environment Transactional Replication can be very useful in BI environments. In my opinion you never want to see users to run custom (SSRS) reports or PowerPivot solutions directly on your production database, it can slow down the system and can cause deadlocks in the database which can cause errors. Transactional Replication can offer a read-only, near real-time database for reporting purposes with minimal overhead on the source system. Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!

  Read the article

• repair broken packages-"dpkg: error: conflicting actions -f (--field) and -r (--remove)"

  - by yinon

  Ubuntu 12.04 LTS. if more information will be needed, tell me and'll give. the main problem is: tzach@tzach-pc:~$ sudo apt-get install docky [sudo] password for tzach: Reading package lists... Done Building dependency tree Reading state information... Done docky is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: ca-certificates-java : Depends: openjdk-6-jre-headless (>= 6b16-1.6.1-2) but it is not going to be installed or java6-runtime-headless openjdk-7-jre-lib : Depends: openjdk-7-jre-headless (>= 7~b130~pre0) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). tzach@tzach-pc:~$ and also: tzach@tzach-pc:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. **The following packages have unmet dependencies: ca-certificates-java : Depends: openjdk-6-jre-headless (>= 6b16-1.6.1-2) but it is not installed or java6-runtime-headless openjdk-7-jre-lib : Depends: openjdk-7-jre-headless (>= 7~b130~pre0) but it is not installed E: Unmet dependencies. Try using ******* so we tryied the guide here in messege #9: http://ubuntuforums.org/showthread.php?t=947124 we run all the first 4 commands and the last one-"sudo apt-get autoremove" gave us: tzach@tzach-pc:~$ sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: **ca-certificates-java** : Depends: openjdk-6-jre-headless (>= 6b16-1.6.1-2) but it is not installed or java6-runtime-headless **openjdk-7-jre-lib** : Depends: openjdk-7-jre-headless (>= 7~b130~pre0) but it is not installed E: Unmet dependencies. Try using -f. so we run the last command twice: sudo dpkg --remove -force --force-remove-reinstreq ca-certificates-java and sudo dpkg --remove -force --force-remove-reinstreq openjdk-7-jre-lib but both of them gives: tzach@tzach-pc:~$ sudo dpkg --remove -force --force-remove-reinstreq ca-certificates-java [sudo] password for tzach: dpkg: error: conflicting actions -f (--field) and -r (--remove) Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! EDIT FOR green7-output of "sudo apt-get -f install": tzach@tzach-pc:~$ sudo apt-get -f install [sudo] password for tzach: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: icedtea-7-jre-cacao icedtea-7-jre-jamvm java-common openjdk-7-jre-headless tzdata-java Suggested packages: default-jre equivs sun-java6-fonts ttf-dejavu-extra fonts-ipafont-gothic fonts-ipafont-mincho ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ttf-bengali-fonts The following packages will be REMOVED: ttf-mscorefonts-installer The following NEW packages will be installed: icedtea-7-jre-cacao icedtea-7-jre-jamvm java-common openjdk-7-jre-headless tzdata-java 0 upgraded, 5 newly installed, 1 to remove and 355 not upgraded. 5 not fully installed or removed. Need to get 0 B/29.6 MB of archives. After this operation, 88.5 MB of additional disk space will be used. Do you want to continue [Y/n]? y debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable dpkg: warning: there's no installed package matching ttf-mscorefonts-installer:amd64 Setting up tzdata (2012e-0ubuntu0.12.04) ... debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable dpkg: error processing tzdata (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: tzdata E: Sub-process /usr/bin/dpkg returned an error code (1) EDIT2 FOR green7: tzach@tzach-pc:~$ sudo apt-get remove --purge tzdata [sudo] password for tzach: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: ca-certificates-java : Depends: openjdk-6-jre-headless (>= 6b16-1.6.1-2) but it is not going to be installed or java6-runtime-headless libc6 : Depends: tzdata but it is not going to be installed libc6:i386 : Depends: tzdata:i386 libical0 : Depends: tzdata but it is not going to be installed openjdk-7-jre-lib : Depends: openjdk-7-jre-headless (>= 7~b130~pre0) but it is not going to be installed python-dateutil : Depends: tzdata but it is not going to be installed ubuntu-minimal : Depends: tzdata but it is not going to be installed util-linux : Depends: tzdata (>= 2006c-2) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). EDIT3 FOR green7: tzach@tzach-pc:~$ sudo apt-get install openjdk-7-jre-headless [sudo] password for tzach: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: openjdk-7-jre-headless : Depends: tzdata-java but it is not going to be installed Depends: java-common (>= 0.28) but it is not going to be installed Recommends: icedtea-7-jre-cacao (= 7~u3-2.1.1~pre1-1ubuntu3) but it is not going to be installed Recommends: icedtea-7-jre-jamvm (= 7~u3-2.1.1~pre1-1ubuntu3) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). some things in the text also supposed to be bolded. but not critic (: Thanks for the editing! Thanks a lot for your assistance.

  Read the article

• CQRS - Benefits

  - by Dylan Smith

  Thanks to all the comments and feedback from the last post I think I have a better understanding now of the benefits of CQRS (separate from the benefits of Event Sourcing). I’m going to try and sum it up here, and point out some areas where I could still use some advice: CQRS Benefits Sounds like the primary benefit of CQRS as an architecture is it allows you to create a simpler domain model by sucking out everything related to queries. I can definitely see the benefit to this, in general the domain logic related to commands is the high-value behavior in the software, but the logic required to service the queries would add a lot of low-value “noise” to the domain model that would dilute the high-value (command) behavior – sorting, paging, filtering, pre-fetch paths, etc. Also the most appropriate domain structure for implementing commands might not be the most optimal for implementing queries. To paraphrase Greg, this usually results in a domain model that is mediocre at both, piss-poor at one, or more likely piss-poor at both commands and queries. Not only will you be able to simplify your domain model by pulling out all the query logic, but at least a handful of commands in most systems will probably be “pass-though” type commands with little to no logic that just generate events. If these can be implemented directly in the command-handler and never touch the domain model, this allows you to slim down the domain model even more. Also, if you were to do event sourcing without CQRS, you no longer have a database containing the current state (only the domain model would) which makes it difficult (or impossible) to support ad-hoc querying and/or reporting that is common in most business software. Of course CQRS provides some great scalability benefits, not only scalability but I have to assume that it provides extremely low latency for most operations, especially if you have an asynchronous event bus. I know Greg says that you get a 3x scaling (Commands, Queries, Client) of your ability to perform parallel development, but IMHO, it seems like it only provides 1.5x scaling since even without CQRS you’re going to have your client loosely coupled to your domain - which is still a great benefit to be able to realize. Questions / Concerns If all the queries against an aggregate get pulled out to the Query layer, what if the only commands for that aggregate can be handled in a “pass-through” manner with the command handler directly generating events. Is it possible to have an aggregate that isn’t modeled in the domain model? Are there any issues or downsides to this? I know in the feedback from my previous posts it was suggested that having one domain model handling both commands and queries requires implementing a lot of traversals between objects that wouldn’t be necessary if it was only servicing commands. My question is, do you include traversals in your domain model based on the needs of the code, or based on the conceptual domain model? If none of my Commands require a Customer.Orders traversal, but the conceptual domain includes the concept of a set of orders belonging to a customer – should I model that in my domain model or not? I like the idea of using the Query side of the architecture as a place to put junior devs where the risk of them screwing something up has minimal impact. But I’m not sold on the idea that you can actually outsource it. Like I said in one of my comments on my previous post, the code to handle a query and generate DTO’s is going to be dead simple, but the code to process events and apply them to the tables on the query side is going to require a significant amount of domain knowledge to know which events to listen for to update each of the de-normalized tables (and what changes need to be made when each event is processed). I don’t know about everybody else, but having Indian/Russian/whatever outsourced developers have to do anything that requires significant domain knowledge has never been successful in my experience. And if you need to spec out for each new query which events to listen to and what to do with each one, well that’s probably going to be just as much work to document as it would be to just implement it. Greg made the point in a comment that doing an aggregate query like “Total Sales By Customer” is going to be inefficient if you use event sourcing but not CQRS. I don’t understand why that would be the case. I imagine in that case you’d simply have a method/property on the Customer object that calculated total sales for that customer by enumerating over the Orders collection. Then the application services layer would generate DTO’s off of the Customers collection that included say the CustomerID, CustomerName, TotalSales, or whatever the case may be. As long as you use a snapshotting implementation, I don’t see why that would be anymore inefficient in a DDD+Event Sourcing implementation than in a typical DDD implementation. Like I mentioned in my last post I still have some questions about query logic that haven’t been answered yet, but before I start asking those I want to make sure I have a strong grasp on what benefits CQRS provides.  My main concern with the query logic was that I know I could just toss it all into the query side, but I was concerned that I would be losing the benefits of using CQRS in the first place if I did that.  I want to elaborate more on this though with some example situations in an upcoming post.

  Read the article

• Review of ComponentOne Silverlight Controls (Free License Giveaway).

  - by mbcrump

  ComponentOne has several great products that target Silverlight Developers. One of them is their Silverlight Controls and the other is the XAP Optimizer. I decided that I would check out the controls and Xap Optimizer and feature them on my blog. After talking with ComponentOne, they agreed to take part in my Monthly Silverlight giveaway. The details are listed below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of ComponentOne Silverlight Controls + XAP Optimizer! (the winner also gets a license to Silverlight Spy) Random winner will be announced on March 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump and @ComponentOne http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit ComponentOne because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Live Demos of the Silverlight Controls is located here. The XAP Optimizer page is here. One thing that I liked about the help documentation is that you can grab a PDF that only contains documentation for that control. This allows you to get the information you need without going through several hundred pages. You can also download the full documentation from their site.  ComponentOne Silverlight Controls I recently built a hobby project and decided to use ComponentOne Silverlight Controls. The main reason for this is that the controls are heavily documented, they look great and getting help was just a tweet or forum click away. So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. 1) ComponentOne’s Image Control – Display animated GIF images on your Silverlight pages as you would in traditional Web apps. Add attractive visuals with minimal effort. 2) HTML Host - Render HTML and arbitrary URI content from within Silverlight. 3) Chart3D - Create 3D surface charts with options for contour levels, zones, a chart legend and more. 4) PDFViewer - View PDF files in Silverlight! That is just a fraction of the controls available. If you want to check out several of them in a “real” application then check out my Silverlight page at http://michaelcrump.info. This brings me to the second part of the giveaway. XAP Optimizer – Is designed to reduce the size of your XAP File. It also includes built-in obfuscation and signing. With my personal project, I decided to use the XAP Optimizer by ComponentOne. It was so easy to use. You basically give it your .XAP file and it provides an output file. If you prefer to prune unused references manually then you can prune your XAP file manually by selecting the option below. I went ahead and added Obfuscation just to try it out and it worked great. You may notice from the screenshot below that I only obfuscated assemblies that I built. The other dlls anyone can grab off the net so we have no reason to obfuscate them. You also have the option to automatically sign your .xap with the SN.exe tool. So how did it turn out? Well, I reduced my XAP size from 2.4 to 1.8 with simply a click of a button. I added obfuscation with a click of a button: Screenshot of no obfuscation on my XAP File   Screenshot of obfuscation on my XAP File with XAP Optimizer.   So, with 2 button clicks, I reduce my XAP file and obfuscated my assembly. What else can you want? Well, they provide a nice HTML report that gives you an optimization summary. So what if you don’t want to launch this tool every time you deploy a Silverlight application? Well the official documentation provided a way to do it in your built event in Visual Studio. Click the Build Events tab on the left side of the Properties window. Enter the following command in the Post-build event command line: $Program Files\ComponentOne\XapOptimizer\XapOptimizer.exe /cmd /p:$(ProjectDir)$(ProjectName).xoproj In the end, this is a great product. I love code that I don’t have to write and utilities that just work. ComponentOne delivers with both the Silverlight Controls and the XAP Optimizer. Don’t forget to leave a comment below in order to win a set of the controls! Subscribe to my feed

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

  - by Bertrand Matthelié

  Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• How to install iodbc in Ubuntu 12.10

  - by Hanynowsky

  I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

  Read the article

• Upgrading SSIS Custom Components for SQL Server 2012

  Having finally got around to upgrading my custom components to SQL Server 2012, I thought I’d share some notes on the process. One of the goals was minimal duplication, so the same code files are used to build the 2008 and 2012 components, I just have a separate project file. The high level steps are listed below, followed by some more details. Create a 2012 copy of the project file Upgrade project, just open the new project file is VS2010 Change target framework to .NET 4.0 Set conditional compilation symbol for DENALI Change any conditional code, including assembly version and UI type name Edit project file to change referenced assemblies for 2012 Change target framework to .NET 4.0 Open the project properties. On the Applications page, change the Target framework to .NET Framework 4. Set conditional compilation symbol for DENALI Re-open the project properties. On the Build tab, first change the Configuration to All Configurations, then set a Conditional compilation symbol of DENALI. Change any conditional code, including assembly version and UI type name The value doesn’t have to be DENALI, it can actually be anything you like, that is just what I use. It is how I control sections of code that vary between versions. There were several API changes between 2005 and 2008, as well as interface name changes. Whilst we don’t have the same issues between 2008 and 2012, I still have some sections of code that do change such as the assembly attributes. #if DENALI [assembly: AssemblyDescription("Data Generator Source for SQL Server Integration Services 2012")] [assembly: AssemblyCopyright("Copyright © 2012 Konesans Ltd")] [assembly: AssemblyVersion("3.0.0.0")] #else [assembly: AssemblyDescription("Data Generator Source for SQL Server Integration Services 2008")] [assembly: AssemblyCopyright("Copyright © 2008 Konesans Ltd")] [assembly: AssemblyVersion("2.0.0.0")] #endif The Visual Studio editor automatically formats the code based on the current compilation symbols, hence in this case the 2008 code is grey to indicate it is disabled. As you can see in the previous example I have distinct assembly version attributes, ensuring I can run both 2008 and 2012 versions of my component side by side. For custom components with a user interface, be sure to update the UITypeName property of the DtsTask or DtsPipelineComponent attributes. As above I use the conditional compilation symbol to control the code. #if DENALI [DtsTask ( DisplayName = "File Watcher Task", Description = "File Watcher Task", IconResource = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask.ico", UITypeName = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTaskUI,Konesans.Dts.Tasks.FileWatcherTask,Version=3.0.0.0,Culture=Neutral,PublicKeyToken=b2ab4a111192992b", TaskContact = "File Watcher Task; Konesans Ltd; Copyright © 2012 Konesans Ltd; http://www.konesans.com" )] #else [DtsTask ( DisplayName = "File Watcher Task", Description = "File Watcher Task", IconResource = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask.ico", UITypeName = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTaskUI,Konesans.Dts.Tasks.FileWatcherTask,Version=2.0.0.0,Culture=Neutral,PublicKeyToken=b2ab4a111192992b", TaskContact = "File Watcher Task; Konesans Ltd; Copyright © 2004-2008 Konesans Ltd; http://www.konesans.com" )] #endif public sealed class FileWatcherTask: Task, IDTSComponentPersist, IDTSBreakpointSite, IDTSSuspend { // .. code goes on... } Shown below is another example I found that needed changing. I borrow one of the MS editors, and use it against a custom property, but need to ensure I reference the correct version of the MS controls assembly. This section of code is actually shared between the 2005, 2008 and 2012 versions of my component hence it has test for both DENALI and KATMAI symbols. #if DENALI const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=11.0.00.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #elif KATMAI const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #else const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #endif // Create Match Expression parameter IDTSCustomPropertyCollection100 propertyCollection = outputColumn.CustomPropertyCollection; IDTSCustomProperty100 property = propertyCollection.New(); property = propertyCollection.New(); property.Name = MatchParams.Name; property.Description = MatchParams.Description; property.TypeConverter = typeof(MultilineStringConverter).AssemblyQualifiedName; property.UITypeEditor = multiLineUI; property.Value = MatchParams.DefaultValue; Edit project file to change referenced assemblies for 2012 We now need to edit the project file itself. Open the MyComponente2012.cproj  in you favourite text editor, and then perform a couple of find and replaces as listed below: Find Replace Comment Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 Change the assembly references version from SQL Server 2008 to SQL Server 2012. Microsoft SQL Server\100\ Microsoft SQL Server\110\ Change any assembly reference hint path locations from from SQL Server 2008 to SQL Server 2012. If you use any Build Events during development, such as copying the component assembly to the DTS folder, or calling GACUTIL to install it into the GAC, you can also change these now. An example of my new post-build event for a pipeline component is shown below, which uses the .NET 4.0 path for GACUTIL. It also uses the 110 folder location, instead of 100 for SQL Server 2008, but that was covered the the previous find and replace. "C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\gacutil.exe" /if "$(TargetPath)" copy "$(TargetPath)" "%ProgramFiles%\Microsoft SQL Server\110\DTS\PipelineComponents" /Y

  Read the article

• OpenSSL Versions in Solaris

  - by darrenm

  Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10.  I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9).  At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7.  The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine.   For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10.  Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph!  OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile.  At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way.  There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train).  The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon.  Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express.  First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0.  This was a huge milestone for a long standing and highly respected open source project.  It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version.     In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL.  The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream.  At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

  Read the article

• Unable to fix broken packages with sudo apt-get install -f

  - by Bob

  Here's my result, of sudo apt-get install -f. i have Ran it twice and got negative result. I believe there is an error at "error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English" This same statement "error in Version string, caused me three days of attempting to download version 12.04. There is a bug report concerning the quoted text as well. Is there anyway to download the version without the language packs, why would I corrupt version 11.10? Also, when attempting to download Synaptic using sudo apt-get install synaptic, I get the same error message. Again I point out the initial download problems and the same error message receipt. Thanks b0b@b0b-IC780M-A:~$ sudo apt-get install -f [sudo] password for b0b: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get upgrade install Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: linux-headers-generic software-center The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner appmenu-qt apport apport-gtk apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common checkbox checkbox-gtk command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc deja-dup desktop-file-utils dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hpijs hplip hplip-cups hplip-data indicator-datetime indicator-session indicator-sound isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libarchive1 libasound2-plugins libatk-adaptor libbind9-60 libbrasero-media3-1 libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libgconf2-4 libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgoa-1.0-0 libgrip0 libgs9 libgs9-common libgtk-3-bin libgtksourceview-3.0-0 libgtksourceview-3.0-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-zeroconf1.0-cil libnautilus-extension1 libnm-glib-vpn1 libnm-glib4 libnm-util2 libnotify0.4-cil libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libreoffice-emailmerge libreoffice-style-human libsane-hpaio libsmbclient libsnmp-base libsnmp15 libsyncdaemon-1.0-1 libt1-5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libunity-2d-private0 libunity-core-4.0-4 libunity6 libusbmuxd1 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxml2 linux-generic linux-image-generic metacity metacity-common mobile-broadband-provider-info modemmanager mousetweaks multiarch-support nautilus nautilus-data nautilus-sendto-empathy network-manager nux-tools onboard openssl pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-cups python-cupshelpers python-gobject-cairo python-httplib2 python-launchpadlib python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support tomboy totem totem-common totem-mozilla totem-plugins ttf-opensymbol ubuntu-desktop ubuntu-minimal ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch unity unity-2d unity-2d-launcher unity-2d-panel unity-2d-places unity-2d-spread unity-common unity-lens-applications unity-services update-manager update-manager-core update-notifier update-notifier-common usbmuxd vim-common vim-tiny vinagre vino xorg xserver-xorg xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xul-ext-ubufox 296 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B/159 MB of archives. After this operation, 10.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y Extracting templates from packages: 100% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 4131 package 'python-zope.interface': error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English . language-pack-en-base provides the bulk of translation data and is updated only seldom. This package provides frequent translation updates.': version string has embedded spaces E: Sub-process /usr/bin/dpkg returned an error code (2) b0b@b0b-IC780M-A:~$

  Read the article

• Silverlight 4 Twitter Client &ndash; Part 7

  - by Max

  Download this article as a PDF Welcome back :) This week we are going to look at something more exciting and a much required feature for any twitter client – auto refresh so as to show new status updates. We are going to achieve this using Silverlight 4 Timers and a bit and refresh our datagrid every 2 minutes to show new updates. We will do this so that we do only minimal request to the twitter api, so that twitter does not block us – there is a limit of 150 request an hour. Let us get started now. Also we will get the profile user id hyperlinked, so that when ever the user click on it, we will take them to their twitter page. Also it was a pain to always run this application by pressing F5, then it would open in a browser you would have to right click uninstall and install it again to see any changes. All this and yet we were not able to debug it :( Now there is a solution for this to run a silverlight application directly out of browser and yet have the debug feature. Super cool, here is how. Right on the Silverlight project and go to debug and then select the Out-Of-Browser application option and choose the *.Web project. Then just right click on the SL project and set as Startup Project. There you go, now every time you press F5, it will automatically run out of browser and still have the debug options. I go to know about this after some binging. Now let us jump to the core straight away. 1) To get the user id hyperlinked, we need to have a DataGridTemplateColumn and within that have a HyperLinkButton. The code for this will  be <data:DataGridTemplateColumn> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <HyperlinkButton Click="HyperlinkButton_Click" Content="{Binding UserName}" TargetName="_blank" ></HyperlinkButton> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> </data:DataGridTemplateColumn> 2) Now let us look at how we are getting this done by looking into HyperlinkButton_Click event handler. There we will dynamically set the NavigateUri to the twitter page. I tried to do this using some binding, eval like stuff as in ASP.NET, but no luck! private void HyperlinkButton_Click(object sender, RoutedEventArgs e) { HyperlinkButton hb = (HyperlinkButton)e.OriginalSource; hb.NavigateUri = new Uri("http://twitter.com/" + hb.Content.ToString(), UriKind.Absolute); } 3) Now we need to switch on our Timer right in the OnNavigated to event on our SL page. So we need to modify our OnNavigated event to some thing like below: protected override void OnNavigatedTo(NavigationEventArgs e) { image1.Source = new BitmapImage(new Uri(GlobalVariable.profileImage, UriKind.Absolute)); this.Title = GlobalVariable.getUserName() + " - Home"; if (!GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Login", UriKind.Relative)); else { currentGrid = "Timeline-Grid"; TwitterCredentialsSubmit(); myDispatcherTimer.Interval = new TimeSpan(0, 0, 0, 60, 0); myDispatcherTimer.Tick += new EventHandler(Each_Tick); myDispatcherTimer.Start(); } } I use a global string – here it is currentGrid variable to indicate what is bound in the datagrid so that after every timer tick, I can rebind the latest data to it again. Like I will only rebind the friends timeline again if the data grid currently holds it and I’ll only rebind the respective list status again in the data grid, if already a list status is bound to the data grid. In the above timer code, its set to trigger the Each_Tick event handler every 1 minute (60 seconds). TimeSpan takes in (days, hours, minutes, seconds, milliseconds). 4) Now we need to set the list name in the currentGrid variable when a list button is clicked. So add the code line below to the list button event handler currentGrid = currentList = b.Content.ToString(); 5) Now let us see how Each_Tick event handler is implemented. public void Each_Tick(object o, EventArgs sender) { if (!currentGrid.Equals("Timeline-Grid")) getListStatuses(currentGrid); else { WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(GlobalVariable.getUserName(), GlobalVariable.getPassword()); myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); } } If the data grid hold friends timeline, I just use the same bit of code we had already to bind the friends timeline to the data grid. Copy Paste. But if it is some list timeline that is bound in the datagrid, I then call the getListStatus method with the currentGrid string which will actually be holding the list name. 6) I wanted to make the hyperlinks inside the status message as hyperlinks and when the user clicks on it, we can then open that link. I tried using a convertor and using a regex to recognize a url and wrap it up with a href, but that is not gonna work in silverlight textblock :( Anyways that convertor code is in the zip file. 7) You can get the complete project files from here. 8) Please comment below for your doubts, suggestions, improvements. I will try to reply as early as possible. Thanks for all your support. Technorati Tags: Silverlight 4,Datagrid,Twitter API,Silverlight Timer

  Read the article

• Automating custom software installation in a zone

  - by mgerdts

  In Solaris 11, the internals of zone installation are quite different than they were in Solaris 10.  This difference allows the administrator far greater control of what software is installed in a zone.  The rules in Solaris 10 are simple and inflexible: if it is installed in the global zone and is not specifically excluded by package metadata from being installed in a zone, it is installed in the zone.  In Solaris 11, the rules are still simple, but are much more flexible:  the packages you tell it to install and the packages on which they depend will be installed. So, where does the default list of packages come from?  From the AI (auto installer) manifest, of course.  The default AI manifest is /usr/share/auto_install/manifest/zone_default.xml.  Within that file you will find:             <software_data action="install">                 <name>pkg:/group/system/solaris-small-server</name>             </software_data> So, the default installation will install pkg:/group/system/solaris-small-server.  Cool.  What is that?  You can figure out what is in the package by looking for it in the repository with your web browser (click the manifest link), or use pkg(1).  In this case, it is a group package (pkg:/group/), so we know that it just has a bunch of dependencies to name the packages that really wants installed. $ pkg contents -t depend -o fmri -s fmri -r solaris-small-server FMRI compress/bzip2 compress/gzip compress/p7zip ... terminal/luit terminal/resize text/doctools text/doctools/ja text/less text/spelling-utilities web/wget If you would like to see the entire manifest from the command line, use pkg contents -r -m solaris-small-server. Let's suppose that you want to install a zone that also has mercurial and a full-fledged installation of vim rather than just the minimal vim-core that is part of solaris-small-server.  That's pretty easy. First, copy the default AI manifest somewhere where you will edit it and make it writable. # cp /usr/share/auto_install/manifest/zone_default.xml ~/myzone-ai.xml # chmod 644 ~/myzone-ai.xml Next, edit the file, changing the software_data section as follows:             <software_data action="install">                 <name>pkg:/group/system/solaris-small-server</name>                 <name>pkg:/developer/versioning/mercurial</name>                <name>pkg:/editor/vim</name>             </software_data> To figure out  the names of the packages, either search the repository using your browser, or use a command like pkg search hg. Now we are all ready to install the zone.  If it has not yet been configured, that must be done as well. # zonecfg -z myzone 'create; set zonepath=/zones/myzone' # zoneadm -z myzone install -m ~/myzone-ai.xml A ZFS file system has been created for this zone. Progress being logged to /var/log/zones/zoneadm.20111113T004303Z.myzone.install Image: Preparing at /zones/myzone/root. Install Log: /system/volatile/install.15496/install_log AI Manifest: /tmp/manifest.xml.XfaWpE SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: myzone Installation: Starting ... Creating IPS image Installing packages from: solaris origin: http://localhost:1008/solaris/54453f3545de891d4daa841ddb3c844fe8804f55/ DOWNLOAD PKGS FILES XFER (MB) Completed 169/169 34047/34047 185.6/185.6 PHASE ACTIONS Install Phase 46498/46498 PHASE ITEMS Package State Update Phase 169/169 Image State Update Phase 2/2 Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 531.813 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/myzone/root/var/log/zones/zoneadm.20111113T004303Z.myzone.install Now, for a few things that I've seen people trip over: Ignore that bit about man pages - it's wrong.  Man pages are already installed so long as the right facet is set properly.  And that's a topic for another blog entry. If you boot the zone then just use zlogin myzone, you will see that services you care about haven't started and that svc:/milestone/config:default is starting.  That is because you have not yet logged into the console with zlogin -C myzone. If the zone has been booted for more than a very short while when you first connect to the zone console, it will seem like the console is hung.  That's not really the case - hit ^L (control-L) to refresh the sysconfig(1M) screen that is prompting you for information.

  Read the article

• Maximize Performance and Availability with Oracle Data Integration

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms.  With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part II)

  I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010.  Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source.  Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead.  Why?  Well, why not?  This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way.  Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code.  To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article.  The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position.  The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team>     <Player>         <Statistic/>     </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent.  Position, however, is more of a lookup value that will not have any hierarchical relationship to the player.  In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it:  A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith).  Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support.  Lets start with that built-in stuff to give us a base to work off of.  Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more.  I mean a TON more.  Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing!  That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog.  Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids).  Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files.  If you will be doing any customizing of tt files, I highly recommend installing this extension.  Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Use your own domain email and tired of SPAM? SPAMfighter FTW

  - by Dave Campbell

  I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

  Read the article

• Add SQL Azure database to Azure Web Role and persist data with entity framework code first.

  - by MagnusKarlsson

  In my last post I went for a warts n all approach to set up a web role on Azure. In this post I’ll describe how to add an SQL Azure database to the project. This will be described with an as minimal as possible amount of code and screen dumps. All questions are welcome in the comments area. Please don’t email since questions answered in the comments field is made available to other visitors. As an example we will add a comments section to the site we used in the previous post (Länk här). Steps: 1. Create a Comments entity and then use Scaffolding to set up controller and view, and add ConnectionString to web.config. 2. Create SQL Azure database in Management Portal and link the new database 3. Test it online!   1. Right click Models folder, choose add, choose “class…” . Name the Class Comment. 1.1 Replace the Code in the class with the following: using System.Data.Entity; namespace MvcWebRole1.Models { public class Comment {    public int CommentId { get; set; }    public string Name { get; set; }      public string Content { get; set; } } public class CommentsDb : DbContext { public DbSet<Comment> CommentEntries { get; set; } } } Now Entity Framework can create a database and a table named Comment. Build your project to assert there are no build errors.   1.2 Right click Controllers folder, choose add, choose “class…” . Name the Class CommentController and fill out the values as in the example below.     1.3 Click Add. Visual Studio now creates default View for CRUD operations and a Controller adhering to these and opens them. 1.3 Open Web.config and add the following connectionstring in <connectionStrings> node. <add name="CommentsDb” connectionString="data source=(LocalDB)\v11.0;Integrated Security=SSPI;AttachDbFileName=|DataDirectory|\CommentsDb.mdf;Initial Catalog=CommentsDb;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />   1.4 Save All and press F5 to start the application. 1.5 Go to http://127.0.0.1:81/Comments which will redirect you through CommentsController to the Index View which looks like this:     Click Create new. In the Create-view, add name and content and press Create.   1: // 2: // POST: /Comments/Create 3:  4: [HttpPost] 5: public ActionResult Create(Comment comment) 6: { 7: if (ModelState.IsValid) 8: { 9: db.CommentEntries.Add(comment); 10: db.SaveChanges(); 11: return RedirectToAction("Index"); 12: } 13:  14: return View(comment); 15: } 16:    The default View() is Index so that is the View you will come to. Looking like this: 1: // 2: // GET: /Comments/ 3: 4: public ActionResult Index() 5: { 6: return View(db.CommentEntries.ToList()); 7: } Resulting in the following screen dump(success!):   2. Now, go to the Management portal and Create a new db.   2.1 With the new database created. Click the DB icon in the left most menu. Then click the newly created database. Click DASHBOARD in the top menu. Finally click Connections strings in the right menu to get the connection string we need to add in our web.debug.config file.   2.2 Now, take a copy of the connection String earlier added to the web.config and paste in web.debug.conifg in the connectionstrings node. Replace everything within “ “ in the copied connectionstring with that you got from SQL Azure. You will have something like this:   2.3 Rebuild the application, right click the cloud project and choose “Package…” (if you haven’t set up publishing profile which we will do in our next blog post). Remember to choose the right config file, use debug for staging and release for production so your databases won’t collide. You should see something like this:   2.4 Go to Management Portal and click the Web Services menu, choose your service and click update in the bottom menu.   2.5 Link the newly created database to your application. Click the LINKED RESOURCES in the top menu and then click “Link” in the bottom menu. You should get something like this. 3. Alright then. Under the Dashboard you can find the link to your application. Click it to open it in a browser and then go to ~/Comments to try it out just the way we did locally. Success and end of this story!

  Read the article

• 7 Steps To Cut Recruiting Costs & Drive Exceptional Business Results

  - by Oracle Accelerate for Midsize Companies

  By Steve Viarengo, Vice President Product Management, Oracle Taleo Cloud Services  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In good times, trimming operational costs is an ongoing goal. In tough times, it’s a necessity. In both good times and bad, however, recruiting occurs. Growth increases headcount in good times, and opportunistic or replacement hiring occurs in slow business cycles. By employing creative recruiting strategies in tandem with the latest technology developments, you can reduce recruiting costs while driving exceptional business results. Here are some critical areas to focus on. 1.  Target Direct Cost Savings Total recruiting process expenses are the sum of external costs plus internal labor costs. Most organizations can reduce recruiting expenses with direct cost savings. While additional savings on indirect costs can be realized from process improvement and efficiency gains, there are direct cost savings and benefits readily available in three broad areas: sourcing, assessments, and green recruiting. 2. Sourcing: Reduce Agency Costs Agency search firm fees can amount to 35 percent of a new employee’s annual base salary. Typically taken from the hiring department budget, these fees may not be visible to HR. By relying on internal mobility programs, referrals, candidate pipelines, and corporate career Websites, organizations can reduce or eliminate this agency spend. And when you do have to pay third-party agency fees, you can optimize the value you receive by collaborating with agencies to identify referred candidates, ensure access to candidate data and history, and receive automatic notifications and correspondence. 3. Sourcing: Reduce Advertising Costs You can realize significant cost reductions by placing all job positions on your corporate career Website. This will allow you to reap a substantial number of candidates at minimal cost compared to job boards and other sourcing options. 4.  Sourcing: Internal Talent Pool Internal talent pools provide a way to reduce sourcing and advertising costs while delivering improved productivity and retention. Internal redeployment reduces costs and ramp-up time while increasing retention and employee satisfaction. 5.  Sourcing: External Talent Pool Strategic recruiting requires identifying and matching people with a given set of skills to a particular job while efficiently allocating sourcing expenditures. By using an e-recruiting system (which drives external talent pool management) with a candidate relationship database, you can automate prescreening and candidate matching while communicating with targeted candidates. Candidate relationship management can lower sourcing costs by marketing new job opportunities to candidates sourced in the past. By mining the talent pool in this fashion, you eliminate the need to source a new pool of candidates for each new requisition. Managing and mining the corporate candidate database can reduce the sourcing cost per candidate by as much as 50 percent. 6.  Assessments: Reduce Turnover Costs By taking advantage of assessments during the recruitment process, you can achieve a range of benefits, including better productivity, superior candidate performance, and lower turnover (providing considerable savings). Assessments also save recruiter and hiring manager time by focusing on a short list of qualified candidates. Hired for fit, such candidates tend to stay with the organization and produce quality work—ultimately driving revenue.  7. Green Recruiting: Reduce Paper and Processing Costs You can reduce recruiting costs by automating the process—and making it green. A paperless process informs candidates that you’re dedicated to green recruiting. It also leads to direct cost savings. E-recruiting reduces energy use and pollution associated with manufacturing, transporting, and recycling paper products. And process automation saves energy in mailing, storage, handling, filing, and reporting tasks. Direct cost savings come from reduced paperwork related to résumés, advertising, and onboarding. Improving the recruiting process through sourcing, assessments, and green recruiting not only saves costs. It also positions the company to improve the talent base during the recession while retaining the ability to grow appropriately in recovery. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >