Search Results

Search found 11100 results on 444 pages for 'normal distribution'.

Page 47/444 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Two VPN (internet) connections rounting (win2003)

  - by tmp3128

  Here is my setup: - win2003 server (ISA installed) with 3 NICs:   1) internal network   2) ISP 1 (default) network (DHCP enabled)   3) ISP 2 (backup) network (DHCP enabled) - several "normal" PC within internal net - one "special" PC within internal net Both ISP 1 and ISP 2 provide access to internet and their resources thru their VPN connections. The goal is to enable all "normal" PCs to use internet from ISP_1's VPN connection and "special" should use only ISP_2's VPN connection. Futhermore all "normal" and "special" PCs should have access to several servers accesible only thru ISP_2's VPN connection. I have some thoughts how to achieve this but I want to be certain because everything should be configured as quickly as posible, avoiding significant downtime. windows-server-2003 isa routing vpn

  Read the article

• route to vpn based on destination

  - by inquam

  I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations uses the "normal" connection? Edit (clarification): This is for outbound connections. I.e. the machine conencts to a server on foo.com and uses the VPN and the machine connects to bar.se and uses the "normal" interface. Let's say foo.com has an IP filter that ensures users are located in USA, if I go through the VPN I get a US ip and everything is fine. But tif all traffic goes this way the bar.se server that has a IP filter ensuring users are in Sweden will complain. So I want to route the traffic depending on server location. US servers through VPN and others through the normal interface.

  Read the article

• finder restore window error

  - by corne

  my mac with lion starts up with the finder dispaying the message to "restore window" and keep on cycling thru it but never opening the finder window. other sites say that file/s in my desktop folder is corupt and i must delete them fith terminal. there is no way to open the terminal app in my normal user profile. i have created a test user profile with administative rights and that works fine but the problem is my normal desktop folder is locked and not accesiable in my test user account. how do is delete those files in my normal desktop folder with the terminal app?

  Read the article

• Very different font sizes across browsers

  - by Yang

  Chrome/WebKit and Firefox have different rendering engines which render fonts differently, in particular with differing dimensions. This isn't too surprising, but what's surprising is the magnitude of some of the differences. I can always tweak individual elements on a page to be more similar, but that's tedious, to say the least. I've been searching for more systematic solutions, but many resources (e.g. SO answers) simply say "use a reset package." While I'm sure this fixes a bunch of other things like padding and spacing, it doesn't seem to make any difference for font dimensions. For instance, if I take the reset package from http://html5reset.org/, I can show pretty big differences (note the layout dimensions shown in the inspectors). [The images below are actually higher res than shown/resized in this answer.] <h1 style="font-size:64px; background-color: #eee;">Article Header</h1> With Helvetica, Chrome is has the shorter height instead. <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> Using a different font, Chrome again renders a much taller font, but additionally the letter spacing goes haywire (probably due to the boldification of the font): <style> @font-face { font-family: "MyriadProRegular"; src: url("fonts/myriadpro-regular-webfont.eot"); src: local("?"), url("fonts/myriadpro-regular-webfont.woff") format("woff"), url("fonts/myriadpro-regular-webfont.ttf") format("truetype"), url("fonts/myriadpro-regular-webfont.svg#webfonteknRmz0m") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProLight"; src: url("fonts/myriadpro-light-webfont.eot"); src: local("?"), url("fonts/myriadpro-light-webfont.woff") format("woff"), url("fonts/myriadpro-light-webfont.ttf") format("truetype"), url("fonts/myriadpro-light-webfont.svg#webfont2SBUkD9p") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProSemibold"; src: url("fonts/myriadpro-semibold-webfont.eot"); src: local("?"), url("fonts/myriadpro-semibold-webfont.woff") format("woff"), url("fonts/myriadpro-semibold-webfont.ttf") format("truetype"), url("fonts/myriadpro-semibold-webfont.svg#webfontM3ufnW4Z") format("svg"); font-weight: normal; font-style: normal; } </style> ... <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> I've tried a few resets/normalize packages to no avail. I just wanted to confirm here that this is indeed a fact of life (even omitting the more glaring offenders like IE and mobile) and I'm not missing some super-awesome solution to this mess.

  Read the article

• Ubuntu 12.04 + Eclipse 64 bits key binding error

  - by user110933

  The text is quite extense so, this is just a part of it: !SESSION 2012-11-23 10:15:52.442 ----------------------------------------------- eclipse.buildId=I20120608-1200 java.version=1.7.0_09 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.jface 2 0 2012-11-23 10:16:06.408 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 10:16:06.408 !MESSAGE A conflict occurred for ALT+SHIFT+R: Binding(ALT+SHIFT+R, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) Binding(ALT+SHIFT+R, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) !ENTRY org.eclipse.ui.workbench 4 0 2012-11-23 10:16:10.409 !MESSAGE An unexpected exception was thrown. !STACK 0 java.lang.NullPointerException at org.eclipse.ui.internal.WorkbenchWindow.putToolbarLabel(WorkbenchWindow.java:1697) at org.eclipse.ui.internal.menus.MenuAdditionCacheEntry.createToolBarAdditionContribution(MenuAdditionCacheEntry.java:208) at org.eclipse.ui.internal.menus.MenuAdditionCacheEntry.createContributionItems(MenuAdditionCacheEntry.java:177) at org.eclipse.ui.internal.menus.TrimContributionManager.update(TrimContributionManager.java:224) at org.eclipse.ui.internal.WorkbenchWindow.updateLayoutDataForContents(WorkbenchWindow.java:3874) at org.eclipse.ui.internal.WorkbenchWindow.setCoolBarVisible(WorkbenchWindow.java:3675) at org.eclipse.ui.internal.ViewIntroAdapterPart.setBarVisibility(ViewIntroAdapterPart.java:203) at org.eclipse.ui.internal.ViewIntroAdapterPart.dispose(ViewIntroAdapterPart.java:106) at org.eclipse.ui.internal.WorkbenchPartReference.doDisposePart(WorkbenchPartReference.java:737) at org.eclipse.ui.internal.ViewReference.doDisposePart(ViewReference.java:107) at org.eclipse.ui.internal.WorkbenchPartReference.dispose(WorkbenchPartReference.java:684) at org.eclipse.ui.internal.WorkbenchPage.disposePart(WorkbenchPage.java:1801) at org.eclipse.ui.internal.WorkbenchPage.partRemoved(WorkbenchPage.java:1793) at org.eclipse.ui.internal.ViewFactory.releaseView(ViewFactory.java:257) at org.eclipse.ui.internal.Perspective.dispose(Perspective.java:292) at org.eclipse.ui.internal.WorkbenchPage.dispose(WorkbenchPage.java:1872) at org.eclipse.ui.internal.WorkbenchWindow.closeAllPages(WorkbenchWindow.java:894) at org.eclipse.ui.internal.WorkbenchWindow.hardClose(WorkbenchWindow.java:1729) at org.eclipse.ui.internal.WorkbenchWindow.busyClose(WorkbenchWindow.java:730) at org.eclipse.ui.internal.WorkbenchWindow.access$0(WorkbenchWindow.java:715) at org.eclipse.ui.internal.WorkbenchWindow$6.run(WorkbenchWindow.java:867) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchWindow.close(WorkbenchWindow.java:865) at org.eclipse.jface.window.WindowManager.close(WindowManager.java:109) at org.eclipse.ui.internal.Workbench$18.run(Workbench.java:1114) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.busyClose(Workbench.java:1111) at org.eclipse.ui.internal.Workbench.access$15(Workbench.java:1040) at org.eclipse.ui.internal.Workbench$25.run(Workbench.java:1284) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.Workbench.close(Workbench.java:1282) at org.eclipse.ui.internal.Workbench.close(Workbench.java:1254) at org.eclipse.ui.internal.WorkbenchWindow.busyClose(WorkbenchWindow.java:727) at org.eclipse.ui.internal.WorkbenchWindow.access$0(WorkbenchWindow.java:715) at org.eclipse.ui.internal.WorkbenchWindow$6.run(WorkbenchWindow.java:867) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchWindow.close(WorkbenchWindow.java:865) at org.eclipse.jface.window.Window.handleShellCloseEvent(Window.java:741) at org.eclipse.jface.window.Window$3.shellClosed(Window.java:687) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:98) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1276) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1300) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1285) at org.eclipse.swt.widgets.Shell.closeWidget(Shell.java:617) at org.eclipse.swt.widgets.Shell.gtk_delete_event(Shell.java:1191) at org.eclipse.swt.widgets.Widget.windowProc(Widget.java:1750) at org.eclipse.swt.widgets.Control.windowProc(Control.java:5116) at org.eclipse.swt.widgets.Display.windowProc(Display.java:4369) at org.eclipse.swt.internal.gtk.OS._gtk_main_do_event(Native Method) at org.eclipse.swt.internal.gtk.OS.gtk_main_do_event(OS.java:8295) at org.eclipse.swt.widgets.Display.eventProc(Display.java:1192) at org.eclipse.swt.internal.gtk.OS._g_main_context_iteration(Native Method) at org.eclipse.swt.internal.gtk.OS.g_main_context_iteration(OS.java:2332) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3177) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2499) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:679) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:353) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:180) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:629) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584) at org.eclipse.equinox.launcher.Main.run(Main.java:1438) at org.eclipse.equinox.launcher.Main.main(Main.java:1414) !SESSION 2012-11-23 10:36:07.863 ----------------------------------------------- eclipse.buildId=I20120608-1200 java.version=1.7.0_09 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.jface 2 0 2012-11-23 10:36:13.181 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 10:36:13.181 !MESSAGE A conflict occurred for ALT+SHIFT+R: Binding(ALT+SHIFT+R, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) Binding(ALT+SHIFT+R, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) !ENTRY org.eclipse.osgi 2 1 2012-11-23 10:39:04.681 !MESSAGE NLS unused message: CacheManager_CannotLoadNonUrlLocation in: org.eclipse.equinox.internal.p2.repository.messages !SESSION 2012-11-23 15:14:12.933 ----------------------------------------------- eclipse.buildId=I20120608-1200 java.version=1.7.0_09 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.jface 2 0 2012-11-23 15:14:23.380 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 15:14:23.380 !MESSAGE A conflict occurred for ALT+SHIFT+R: Binding(ALT+SHIFT+R, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) Binding(ALT+SHIFT+R, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) !ENTRY org.springframework.ide.eclipse.uaa 4 2 2012-11-23 15:14:32.800 !MESSAGE Problems occurred when invoking code from plug-in: "org.springframework.ide.eclipse.uaa". !STACK 0 java.lang.NullPointerException at org.springframework.ide.eclipse.internal.uaa.monitor.CommandUsageMonitor.startMonitoring(CommandUsageMonitor.java:61) at org.springframework.ide.eclipse.uaa.UaaPlugin$1$1.run(UaaPlugin.java:91) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.springframework.ide.eclipse.uaa.UaaPlugin$1.run(UaaPlugin.java:85) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54) !SESSION 2012-11-23 15:15:21.833 ----------------------------------------------- eclipse.buildId=I20120608-1200 java.version=1.7.0_09 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.jface 2 0 2012-11-23 15:15:27.283 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 15:15:27.283 !MESSAGE A conflict occurred for ALT+SHIFT+R: Binding(ALT+SHIFT+R, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) Binding(ALT+SHIFT+R, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,system) !ENTRY org.eclipse.jface 2 0 2012-11-23 15:18:41.265 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 15:18:41.265 !MESSAGE A conflict occurred for ALT+SHIFT+E: Binding(ALT+SHIFT+E, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user) Binding(ALT+SHIFT+E, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user) Binding(ALT+SHIFT+E, ParameterizedCommand(Command(org.eclipse.wst.jsdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.wst.jsdt.ui.category.refactoring,Refactor - JavaScript,JavaScript Refactoring Actions,true), , ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user) !SESSION 2012-11-23 15:18:56.267 ----------------------------------------------- eclipse.buildId=I20120608-1200 java.version=1.7.0_09 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.jface 2 0 2012-11-23 15:19:01.605 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2012-11-23 15:19:01.605 !MESSAGE A conflict occurred for ALT+SHIFT+E: Binding(ALT+SHIFT+E, ParameterizedCommand(Command(org.eclipse.wst.jsdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.wst.jsdt.ui.category.refactoring,Refactor - JavaScript,JavaScript Refactoring Actions,true), , ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user) Binding(ALT+SHIFT+E, ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.rename.element,Rename - Refactoring , Rename the selected element, Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), , ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user) Binding(ALT+SHIFT+E, ParameterizedCommand(Command(oracle.eclipse.tools.common.services.ui.refactor.rename.command,Rename, Rename the selected text., Category(org.eclipse.jdt.ui.category.refactoring,Refactor - Java,Java Refactoring Actions,true), oracle.eclipse.tools.common.services.ui.refactor.internal.ArtifactRefactoringCommandHandler, ,,true),null), org.eclipse.ui.emacsAcceleratorConfiguration, org.eclipse.ui.contexts.window,,,user)

  Read the article

• Doubt about texture waves in CG Ocean Shader

  - by Alexandre

  I'm new on graphical programming, and I'm having some trouble understanding the Ocean Shader described on "Effective Water Simulation from Physical Models" from GPU Gems. The source code associated to this article is here. My problem has been to understand the concept of texture waves. First of all, what is achieved by texture waves? I'm having a hard time trying to figure out it's usefulness. In the section 1.2.4 of the article, it does say that the waves summed into the texture have the same parametrization as the waves used for vertex positioning. Does it mean that I can't use the texture provided by the source code if I change the parameters of the waves, or add more waves to sum? And in the section 1.4.1, is said that we can assume that there is no rotation between texture space and world space if the texture coordinates for our normal map are implicit. What does mean that the "normal map are implicit'? And why do I need a rotation between texture and world spaces if the normal map are not implicit? I would be very grateful for any help on this.

  Read the article

• Manually writing a dx11 tessellation shader

  - by Tudor

  I am looking for resources on what are the steps of manually implementing tessellation (I'm using Unity cg). Today it seems that it is all the rage to hide most of the gpu code far away and use rather rigid simplifications such as unity's SURFace shaders. And it seems useless unless you're doing supeficial stuff. A little background: I have procedurally generated meshes (using marching cubes) which have quality normals but no UVs and no Tangents. I have successfully written a custom vertex and fragment shader to do triplanar texture and bumpmap projection as well as some custom stuff (custom lighting, procedurally warping the texture for variation etc). I am using the GPU Gems book as reference. Now I need to implement tessellation, but It seems I must calculate the tangents at runtime by swizzling normals (ctrl+f this in gems: <normal.z, normal.y, -normal.x>) before the tessellator gets them. And I also need to keep my custom vert+frag setup (with my custom parameters/textures being passed between them) - so apparently I cannot use surface shaders. Can anyone provide some guidence?

  Read the article

• JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue

  - by John-Brown.Evans

  JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue ol{margin:0;padding:0} .c18_3{vertical-align:top;width:487.3pt;border-style:solid;background-color:#f3f3f3;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c20_3{vertical-align:top;width:487.3pt;border-style:solid;border-color:#ffffff;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c19_3{background-color:#ffffff} .c17_3{list-style-type:circle;margin:0;padding:0} .c12_3{list-style-type:disc;margin:0;padding:0} .c6_3{font-style:italic;font-weight:bold} .c10_3{color:inherit;text-decoration:inherit} .c1_3{font-size:10pt;font-family:"Courier New"} .c2_3{line-height:1.0;direction:ltr} .c9_3{padding-left:0pt;margin-left:72pt} .c15_3{padding-left:0pt;margin-left:36pt} .c3_3{color:#1155cc;text-decoration:underline} .c5_3{height:11pt} .c14_3{border-collapse:collapse} .c7_3{font-family:"Courier New"} .c0_3{background-color:#ffff00} .c16_3{font-size:18pt} .c8_3{font-weight:bold} .c11_3{font-size:24pt} .c13_3{font-style:italic} .c4_3{direction:ltr} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt}.subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. In the first post, JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g we looked at how to create a JMS queue and its dependent objects in WebLogic Server. In the previous post, JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue I showed how to write a message to that JMS queue using the QueueSend.java sample program. In this article, we will use a similar sample, the QueueReceive.java program to read the message from that queue. Please review the previous posts if you have not already done so, as they contain prerequisites for executing the sample in this article. 1. Source code The following java code will be used to read the message(s) from the JMS queue. As with the previous example, it is based on a sample program shipped with the WebLogic Server installation. The sample is not installed by default, but needs to be installed manually using the WebLogic Server Custom Installation option, together with many, other useful samples. You can either copy-paste the following code into your editor, or install all the samples. The knowledge base article in My Oracle Support: How To Install WebLogic Server and JMS Samples in WLS 10.3.x (Doc ID 1499719.1) describes how to install the samples. QueueReceive.java package examples.jms.queue; import java.util.Hashtable; import javax.jms.*; import javax.naming.Context; import javax.naming.InitialContext; import javax.naming.NamingException; /** * This example shows how to establish a connection to * and receive messages from a JMS queue. The classes in this * package operate on the same JMS queue. Run the classes together to * witness messages being sent and received, and to browse the queue * for messages. This class is used to receive and remove messages * from the queue. * * @author Copyright (c) 1999-2005 by BEA Systems, Inc. All Rights Reserved. */ public class QueueReceive implements MessageListener { // Defines the JNDI context factory. public final static String JNDI_FACTORY="weblogic.jndi.WLInitialContextFactory"; // Defines the JMS connection factory for the queue. public final static String JMS_FACTORY="jms/TestConnectionFactory"; // Defines the queue. public final static String QUEUE="jms/TestJMSQueue"; private QueueConnectionFactory qconFactory; private QueueConnection qcon; private QueueSession qsession; private QueueReceiver qreceiver; private Queue queue; private boolean quit = false; /** * Message listener interface. * @param msg message */ public void onMessage(Message msg) { try { String msgText; if (msg instanceof TextMessage) { msgText = ((TextMessage)msg).getText(); } else { msgText = msg.toString(); } System.out.println("Message Received: "+ msgText ); if (msgText.equalsIgnoreCase("quit")) { synchronized(this) { quit = true; this.notifyAll(); // Notify main thread to quit } } } catch (JMSException jmse) { System.err.println("An exception occurred: "+jmse.getMessage()); } } /** * Creates all the necessary objects for receiving * messages from a JMS queue. * * @param ctx JNDI initial context * @param queueName name of queue * @exception NamingException if operation cannot be performed * @exception JMSException if JMS fails to initialize due to internal error */ public void init(Context ctx, String queueName) throws NamingException, JMSException { qconFactory = (QueueConnectionFactory) ctx.lookup(JMS_FACTORY); qcon = qconFactory.createQueueConnection(); qsession = qcon.createQueueSession(false, Session.AUTO_ACKNOWLEDGE); queue = (Queue) ctx.lookup(queueName); qreceiver = qsession.createReceiver(queue); qreceiver.setMessageListener(this); qcon.start(); } /** * Closes JMS objects. * @exception JMSException if JMS fails to close objects due to internal error */ public void close()throws JMSException { qreceiver.close(); qsession.close(); qcon.close(); } /** * main() method. * * @param args WebLogic Server URL * @exception Exception if execution fails */ public static void main(String[] args) throws Exception { if (args.length != 1) { System.out.println("Usage: java examples.jms.queue.QueueReceive WebLogicURL"); return; } InitialContext ic = getInitialContext(args[0]); QueueReceive qr = new QueueReceive(); qr.init(ic, QUEUE); System.out.println( "JMS Ready To Receive Messages (To quit, send a \"quit\" message)."); // Wait until a "quit" message has been received. synchronized(qr) { while (! qr.quit) { try { qr.wait(); } catch (InterruptedException ie) {} } } qr.close(); } private static InitialContext getInitialContext(String url) throws NamingException { Hashtable env = new Hashtable(); env.put(Context.INITIAL_CONTEXT_FACTORY, JNDI_FACTORY); env.put(Context.PROVIDER_URL, url); return new InitialContext(env); } } 2. How to Use This Class 2.1 From the file system on Linux This section describes how to use the class from the file system of a WebLogic Server installation. Log in to a machine with a WebLogic Server installation and create a directory to contain the source and code matching the package name, e.g. span$HOME/examples/jms/queue. Copy the above QueueReceive.java file to this directory. Set the CLASSPATH and environment to match the WebLogic server environment. Go to $MIDDLEWARE_HOME/user_projects/domains/base_domain/bin  and execute . ./setDomainEnv.sh Collect the following information required to run the script: The JNDI name of the JMS queue to use In the WebLogic server console > Services > Messaging > JMS Modules > Module name, (e.g. TestJMSModule) > JMS queue name, (e.g. TestJMSQueue) select the queue and note its JNDI name, e.g. jms/TestJMSQueue The JNDI name of the connection factory to use to connect to the queue Follow the same path as above to get the connection factory for the above queue, e.g. TestConnectionFactory and its JNDI name e.g. jms/TestConnectionFactory The URL and port of the WebLogic server running the above queue Check the JMS server for the above queue and the managed server it is targeted to, for example soa_server1. Now find the port this managed server is listening on, by looking at its entry under Environment > Servers in the WLS console, e.g. 8001 The URL for the server to be passed to the QueueReceive program will therefore be t3://host.domain:8001 e.g. t3://jbevans-lx.de.oracle.com:8001 Edit Queue Receive .java and enter the above queue name and connection factory respectively under ... public final static String JMS_FACTORY="jms/TestConnectionFactory"; ... public final static String QUEUE="jms/TestJMSQueue"; ... Compile Queue Receive .java using javac Queue Receive .java Go to the source’s top-level directory and execute it using java examples.jms.queue.Queue Receive   t3://jbevans-lx.de.oracle.com:8001 This will print a message that it is ready to receive messages or to send a “quit” message to end. The program will read all messages in the queue and print them to the standard output until it receives a message with the payload “quit”. 2.2 From JDeveloper The steps from JDeveloper are the same as those used for the previous program QueueSend.java, which is used to send a message to the queue. So we won't repeat them here. Please see the previous blog post at JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue and apply the same steps in that example to the QueueReceive.java program. This concludes the example. In the following post we will create a BPEL process which writes a message based on an XML schema to the queue.

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• Responsive website VS mobile website

  - by Saif Bechan

  I am creating a new blog. Nowadays, especially for a blog, it's important that the websites are accessible for all devices. Now I have to make a choice on what to do. I have seen 2 options. Option 1 is to go with a normal fixed website, for example 960px wide (grid960). And for mobile users have a mobile version. This takes some more time, but then there are 2 good versions of the website. Option 2 I haven't seen a lot yet, creating a adaptive website, or also called responsive website. I am now looking into the LESS framework, where the website automatically switches to to required width. Only downside is that when the normal browser is re-sized, everything re-sizes. Another problem I found is that pinch-to-zoom on devices does not work. Now the question is, which one would you prefer for a blog. One that constantly changes layout when you move your device, or one where you have the choice to view mobile and normal. If there are any other options, please let me know.

  Read the article

• Data Integration 12c Raising the Big Data Roof at Oracle OpenWorld

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"MS Mincho";} Author: Dain Hansen, Director, Oracle It was an exciting OpenWorld 2013 for us in the Data Integration track. Our theme this year was all about ‘being future ready’ - previewing one of our biggest releases this year: Oracle Data Integration 12c. Just this week we followed up with this preview by announcing the general availability of 12c release for Oracle’s key data integration products: Oracle Data Integrator 12c and Oracle GoldenGate 12c. The new release delivers extreme performance, increase IT productivity, and simplify deployment, while helping IT organizations to keep pace with new data-oriented technology trends including cloud computing, big data analytics, real-time business intelligence. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"MS Mincho";} Mark Hurd's keynote on day one set the tone for the Data Integration sessions. Mark focused on big data analytics and the changing consumer expectations. Especially real-time insight is a key theme for Oracle overall and data integration products. In Mark Hurd's keynote we heard from key customers, such as Airbus and Thomson Reuters, how real-time analysis of operational data including machine data creates value, in some cases even saves lives. Thomas Kurian gave a deeper look into Oracle's big data and fast data solutions. In the initial lead Data Integration track session - Brad Adelberg, VP of Development, presented Oracle’s Data Integration 12c product strategy based on key trends from the initial OpenWorld keynotes. Brad talked about how Oracle's data integration products address the new data integration requirements that evolved with cloud computing, big data, and changing consumer expectations and how they set the key themes in our products’ road map. Brad explained why and how fast-time to value, high-performance and future-ready solutions is the top focus areas for product development. If you were not able to attend OpenWorld or this session I recommend reading the white paper: Five New Data Integration Requirements and How to Meet them with Oracle Data Integration, which provides an in-depth look into how Oracle addresses the new trends in the DI market. Following Brad’s session, Nick Wagner provided in depth review of Oracle GoldenGate’s latest features and roadmap. Nick discussed how Oracle GoldenGate’s tight integration with Oracle Database sets the product apart from the competition. We also heard that heterogeneity of the product is still a major focus for GoldenGate’s development and there will be more news on that front when there is a major release. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"MS Mincho";} After GoldenGate’s product strategy session, Denis Gray from the PM team presented Oracle Data Integrator’s product strategy session, talking about the latest and greatest on ODI. Another good session was delivered by long-time GoldenGate users, Comcast.  Jason Hurd and Amit Patel of Comcast talked about the various use cases they deploy Oracle GoldenGate throughout their enterprise, from database upgrades, feeding reporting systems, to active-active database synchronization.  The Comcast team shared many good tips on how to use GoldenGate for both zero downtime upgrades and active-active replication with conflict management requirement. One of our other important goals we had this year for the Data Integration track at OpenWorld was hearing from our customers. We ended day 1 on just that, with a wonderful award ceremony for Oracle Excellence Awards for Oracle Fusion Middleware Innovation. The ceremony was held in the Yerba Buena Center for the Arts. Congratulations to Royal Bank of Scotland and Yalumba Wine Company, the winners in the Data Integration category. You can find more information on the award and the winners in our previous blog post: 2013 Oracle Excellence Awards for Fusion Middleware Innovation… Selected for their innovation use of Oracle’s Data Integration products; the winners for the Data Integration Category are Royal Bank of Scotland and The Yalumba Wine Company. Congratulations!!! Royal Bank of Scotland’s Market and International Banking division provides clients across the globe with seamless trading and competitive pricing, underpinned by a deep knowledge of risk management across the full spectrum of financial products. They handle millions of transactions daily to keep the lifeblood of their clients’ businesses flowing – whether through payment management solutions or through bespoke trade finance solutions. Royal Bank of Scotland is leveraging Oracle GoldenGate and Oracle Data Integrator along with Oracle Business Intelligence Enterprise Edition and the Oracle Database for a variety of solutions. Mainly, Oracle GoldenGate and Oracle Data Integrator are used to feed their data warehouse – providing a real-time data integration solution that feeds transactional data to their analytics system in minutes to enable improved decision making with timely, accurate data for their business users. Oracle Data Integrator’s in-database transformation capabilities and its ability to integrate with Oracle GoldenGate for real-time data capture is the foundation of this implementation. This solution makes it such that changes happening in the analytics systems are available the same day they are deployed on the operational system with 100% data quality guaranteed. Additionally, the solution has helped to reduce their operational database size from 150GB to 10GB. Impressive! Now what if I told you this solution was built in 3 months and had a less than 6 month return on investment? That’s outstanding! The Yalumba Wine Company is situated in the Barossa Valley of Australia. It is the oldest family owned winery in Australia with a unique way of aging their wines in specially crafted 100 liter barrels. Did you know that “Yalumba” is Aboriginal for “all the land around”? The Yalumba Wine Company is growing rapidly, and was in need of introducing a more modern standard to the existing manufacturing processes to meet globalization demands, overall time-to-market, and better operational efficiency objectives of product development. The Yalumba Wine Company worked with a partner, Bristlecone to develop a unique solution whereby Oracle Data Integrator is leveraged to pull data from Salesforce.com and JD Edwards, in addition to their other pre-existing source systems, for consumption into their data warehouse. They have emphasized the overall ease of developing integration workflows with Oracle Data Integrator. The solution has brought better visibility for the business users, shorter data loading and transformation performance to their data warehouse with rapid incorporation of new data sources, and a solid future-proof foundation for their organization. Moving forward, they plan on leveraging more from Oracle’s Data Integration portfolio. Terrific! In addition to these two customers on Tuesday we featured many other important Oracle Data Integrator and Oracle GoldenGate customers. On Tuesday the GoldenGate panel included: Land O’Lakes, Smuckers, and Veolia Water. Besides giving us yummy nutrition and healthy water, these companies have another aspect in common. They all use GoldenGate to boost their ERP application. Please read the recap by Irem Radzik. On Wednesday, the ODI Panel included: Barry Ralston and Ryan Weber of Infinity Insurance, Paul Stracke of Paychex Inc., and Ian Wall of Vertex Pharmaceuticals for a session filled with interesting projects, use cases and approaches to leveraging Oracle Data Integrator. Please read the recap by Sandrine Riley for more. Thanks to everyone who joined with us and we hope to stay connected! To hear more about our Data Integration12c products join us in an upcoming webcast to learn more. Follow us www.twitter.com/ORCLGoldenGate or goto our website at www.oracle.com/goto/dataintegration

  Read the article

• Finding the normals of an oriented bounding box?

  - by Milo

  Here is my problem. I'm working on the physics for my 2D game. All objects are oriented bounding boxes (OBB) based on the separate axis theorem. In order to do collision resolution, I need to be able to get an object out out of the object it is penetrating. To do this I need to find the normal of the face(s) that the other OBB is touching. Example: The small red OBB is a car lets say, and the big OBB is a static building. I need to determine the unit vector that is the normal of the building edge(s) the car is penetrating to get the car out of there. Here are my questions: How do I determine which edges the car is penetrating. I know how to determine the normal of an edge, but how do I know if I need (-dy, dx) or (dy, -dx)? In the case I'm demonstrating the car is penetrating 2 edges, which edge(s) do I use to get it out? Answers or help with any or all of these is greatly appreciated. Thank you

  Read the article

• How to create per-vertex normals when reusing vertex data?

  - by Chris Smith

  I am displaying a cube using a vertex buffer object (gl.ELEMENT_ARRAY_BUFFER). This allows me to specify vertex indicies, rather than having duplicate vertexes. In the case of displaying a simple cube, this means I only need to have eight vertices total. Opposed to needing three vertices per triangle, times two triangles per face, times six faces. Sound correct so far? My question is, how do I now deal with vertex attribute data such as color, texture coordinates, and normals when reusing vertices using the vertex buffer object? If I am reusing the same vertex data in my indexed vertex buffer, how can I differentiate when vertex X is used as part of the cube's front face versus the cube's left face? In both cases I would like the surface normal and texture coordinates to be different. I understand I could average the surface normal, however I would like to render a cube. Also, this still doesn't work for texture coordinates. Is there a way to save memory using a vertex buffer object while being able to provide different vertex attribute data based on context? (Per-triangle would be idea.) Or should I just duplicate each vertex for each context in which it gets rendered. (So there is a one-to-one mapping between vertex, normal, color, etc.) Note: I'm using OpenGL ES.

  Read the article

• What is wrong with my specular phong shading

  - by Thijser

  I'm sorry if this should be placed on stackoverflow instead however seeing as this is graphics related I was hoping you guys could help me: I'm attempting to write a phong shader and currently working on the specular. I came acros the following formula: base*pow(dot(V,R),shininess) and attempted to implement it (V is the posion of the viewer and R the reflective vector). This gave the following result and code: Vec3Df phongSpecular(const Vec3Df & vertexPos, Vec3Df & normal, const Vec3Df & lightPos, const Vec3Df & cameraPos, unsigned int index) { Vec3Df relativeLightPos=(lightPos-vertexPos); relativeLightPos.normalize(); Vec3Df relativeCameraPos= (cameraPos-vertexPos); relativeCameraPos.normalize(); int DotOfNormalAndLight = Vec3Df::dotProduct(normal,relativeLightPos); Vec3Df reflective =(relativeLightPos-(2*DotOfNormalAndLight*normal))*-1; reflective.normalize(); float phongyness= Vec3Df::dotProduct(reflective,relativeCameraPos); if (phongyness<0){ phongyness=0; } float shininess= Shininess[index]; float speculair = powf(phongyness,shininess); return Ks[index]*speculair; } I'm looking for something more like this:

  Read the article

• How-to read data from selected tree node

  - by Frank Nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By default, the SelectionListener property of an ADF bound tree points to the makeCurrent method of the FacesCtrlHierBinding class in ADF to synchronize the current row in the ADF binding layer with the selected tree node. To customize the selection behavior, or just to read the selected node value in Java, you override the default configuration with an EL string pointing to a managed bean method property. In the following I show how you change the selection listener while preserving the default ADF selection behavior. To change the SelectionListener, select the tree component in the Structure Window and open the Oracle JDeveloper Property Inspector. From the context menu, select the Edit option to create a new listener method in a new or an existing managed bean. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} For this example, I created a new managed bean. On tree node select, the managed bean code prints the selected tree node value(s) import java.util.List; import javax.el.ELContext; import javax.el.ExpressionFactory; import javax.el.MethodExpression; import javax.faces.application.Application; import javax.faces.context.FacesContext; import java.util.Iterator; import oracle.adf.view.rich.component.rich.data.RichTree; import oracle.jbo.Row; import oracle.jbo.uicli.binding.JUCtrlHierBinding; import oracle.jbo.uicli.binding.JUCtrlHierNodeBinding; import org.apache.myfaces.trinidad.event.SelectionEvent; import org.apache.myfaces.trinidad.model.CollectionModel; import org.apache.myfaces.trinidad.model.RowKeySet; import org.apache.myfaces.trinidad.model.TreeModel; public class TreeSampleBean { public TreeSampleBean() {} public void onTreeSelect(SelectionEvent selectionEvent) { //original selection listener set by ADF //#{bindings.allDepartments.treeModel.makeCurrent} String adfSelectionListener = "#{bindings.allDepartments.treeModel.makeCurrent}";   //make sure the default selection listener functionality is //preserved. you don't need to do this for multi select trees //as the ADF binding only supports single current row selection     /* START PRESERVER DEFAULT ADF SELECT BEHAVIOR */ FacesContext fctx = FacesContext.getCurrentInstance(); Application application = fctx.getApplication(); ELContext elCtx = fctx.getELContext(); ExpressionFactory exprFactory = application.getExpressionFactory();   MethodExpression me = null;   me = exprFactory.createMethodExpression(elCtx, adfSelectionListener,                                           Object.class, newClass[]{SelectionEvent.class});   me.invoke(elCtx, new Object[] { selectionEvent });     /* END PRESERVER DEFAULT ADF SELECT BEHAVIOR */   RichTree tree = (RichTree)selectionEvent.getSource(); TreeModel model = (TreeModel)tree.getValue();  //get selected nodes RowKeySet rowKeySet = selectionEvent.getAddedSet();   Iterator rksIterator = rowKeySet.iterator();   //for single select configurations,this only is called once   while (rksIterator.hasNext()) {     List key = (List)rksIterator.next();     JUCtrlHierBinding treeBinding = null;     CollectionModel collectionModel = (CollectionModel)tree.getValue();     treeBinding = (JUCtrlHierBinding)collectionModel.getWrappedData();     JUCtrlHierNodeBinding nodeBinding = null;     nodeBinding = treeBinding.findNodeByKeyPath(key);     Row rw = nodeBinding.getRow();     //print first row attribute. Note that in a tree you have to     //determine the node type if you want to select node attributes     //by name and not index      String rowType = rw.getStructureDef().getDefName();       if(rowType.equalsIgnoreCase("DepartmentsView")){      System.out.println("This row is a department: " +                          rw.getAttribute("DepartmentId"));     }     else if(rowType.equalsIgnoreCase("EmployeesView")){      System.out.println("This row is an employee: " +                          rw.getAttribute("EmployeeId"));     }        else{       System.out.println("Huh????");     }     // ... do more useful stuff here   } } -------------------- Download JDeveloper 11.1.2.1 Sample Workspace

  Read the article

• Deloitte 2013 Global Contact Center Survey

  - by Richard Lefebvre

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 "77% of contact centers expect to maintain or grow in size in the next 12-24 months." This is one of the findings of Deloitte's 2013 Global Contact Center Survey in which there are plenty of great business opportunities for all smart CX consultants and integrators using Oracle Service solutions. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

  - by vivi

  I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

  Read the article

• Thematic map contd.

  - by jsharma

  The previous post (creating a thematic map) described the use of an advanced style (color ranged-bucket style). The bucket style definition object has an attribute ('classification') which specifies the data classification scheme to use. It's values can be one of {'equal', 'quantile', 'logarithmic', 'custom'}. We use logarithmic in the previous example. Here we'll describe how to use a custom algorithm for classification. Specifically the Jenks Natural Breaks algorithm. We'll use the Javascript implementation in geostats.js The sample code above needs a few changes which are listed below. Include the geostats.js file after or before including oraclemapsv2.js <script src="geostats.js"></script> Modify the bucket style definition to use custom classification Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}    bucketStyleDef = {       numClasses : colorSeries[colorName].classes,       classification: 'custom', //'logarithmic',  // use a logarithmic scale       algorithm: jenksFromGeostats,       styles: theStyles,       gradient:  useGradient? 'linear' : 'off'     }; The function, which implements the custom classification scheme, is specified as the algorithm attribute value. It must accept two input parameters, an array of OM.feature and the name of the feature attribute (e.g. TOTPOP) to use in the classification, and must return an array of buckets (i.e. an array of or OM.style.Bucket  or OM.style.RangedBucket in this case). However the algorithm also needs to know the number of classes (i.e. the number of buckets to create). So we use a global to pass that info in. (Note: This bug/oversight will be fixed and the custom algorithm will be passed 3 parameters: the features array, attribute name, and number of classes). So createBucketColorStyle() has the following changes Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} var numClasses ; function createBucketColorStyle( colorName, colorSeries, rangeName, useGradient) {    var theBucketStyle;    var bucketStyleDef;    var theStyles = [];    //var numClasses ; numClasses = colorSeries[colorName].classes; ... and the function jenksFromGeostats is defined as Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} function jenksFromGeostats(featureArray, columnName) {    var items = [] ; // array of attribute values to be classified    $.each(featureArray, function(i, feature) {         items.push(parseFloat(feature.getAttributeValue(columnName)));    });    // create the geostats object    var theSeries = new geostats(items);    // call getJenks which returns an array of bounds    var theClasses = theSeries.getJenks(numClasses);    if(theClasses)    {     theClasses[theClasses.length-1]=parseFloat(theClasses[theClasses.length-1])+1;    }    else    {     alert(' empty result from getJenks');    }    var theBuckets = [], aBucket=null ;    for(var k=0; k<numClasses; k++)    {             aBucket = new OM.style.RangedBucket(             {low:parseFloat(theClasses[k]),               high:parseFloat(theClasses[k+1])             });             theBuckets.push(aBucket);     }     return theBuckets; } A screenshot of the resulting map with 5 classes is shown below. It is also possible to simply create the buckets and supply them when defining the Bucket style instead of specifying the function (algorithm). In that case the bucket style definition object would be    bucketStyleDef = {      numClasses : colorSeries[colorName].classes,      classification: 'custom',        buckets: theBuckets, //since we are supplying all the buckets      styles: theStyles,      gradient:  useGradient? 'linear' : 'off'    };

  Read the article

• What is the target of Unity?

  - by burli

  First Unity was developed for Netbooks. But the Netbook Market is shrinking. Unity is not specialized for tablet pcs like Android 3, but it may work well with some specialized Apps for those devices. Unity is still nice for Notebooks with small displays, but there is no big advantage on the desktop compared with other desktop environments like Gnome 2/3 or KDE. So what's the point? My first suggenstion was a hybrid between tablet pc and a desktop, for example for a manager. He can plug the tablet in a docking station in his office and he can work at a normal desktop, whats not possible with iOS or Android. If he is in a meeting he can use it as a tablet to make notes, for example. Or if he is somewhere else outside the office or the company. Same for normal users. They can dock the tablet and use it like a normal desktop pc or they can lie on the couch and browse in the web, read a book or chat with friend. So, thats my suggestion. But what is the real plan for Unity or Ubuntu in general? I'm curious ;)

  Read the article

• backface culling error

  - by acrilige

  I write simple software renderer. In my pipeline i have stage of backface culling. But looks like it has some error (see picture). I perform culling right after world transformation. (i can't insert picture in post coz i don't have enough points, so i just upload it (cube model): http://imageshack.us/photo/my-images/705/bcerror.png/) Vector3F view_dir(0.0f, 0.0f, 1.0f); std::vector<Triangle> to_remove; for (Triangle &t : m_triangles) { Vector4F e1 = t.v2 - t.v1; Vector4F e2 = t.v3 - t.v1; Vector3F normal( e1.y * e2.z - e1.z * e2.y, e1.z * e2.x - e1.x * e2.z, e1.x * e2.y - e1.y * e2.x ); normal.Normalize(); float dot = Dot(view_dir, normal); if (dot <= 0) to_remove.push_back(t); } for (Triangle& t : to_remove) m_triangles.erase(std::remove(m_triangles.begin(), m_triangles.end(), t), m_triangles.end()); Camera sits in origin and points in screen (RH). What is the reason?

  Read the article

• What are all the components of a "Facebook App"?

  - by pnongrata

  I am a developer who has never personally partaken in social media (in any form) for reasons completely outside the scope of this question. I am "off the grid" (no Facebook, Twitter, etc accounts). I'm currently building a web app and would like the app to have a presence on Facebook, and possibly even "port" my app over as a Facebook app. My understanding of Facebook Apps is that they're just normal web apps that get <iframe>d into a Facebook page. The app is actually hosted on your server (not FB's servers). But this got me thinking: Don't Facebook Apps have "profile pages"? Is there anything developers can do to customize the behavior of their own profile pages? Do apps have the ability to do things like MySpace themes used to do (i.e., customize and interact with User profile pages, Groups, etc.)? Do Facebook Apps gain any sort of extra capabilities (inside of Facebook) that a normal web app would not have? It seems to me like if all a Facebook App is, is an iframed-web app, that it would still need to communicate with Facebook via its many APIs, just like a normal app would have to, right? If it's not possible to write an app that can customize the UI or behavior of user profiles and other pages, then how do games like "Farmville" interact with User profiles so that you see updates to profiles like "John Smith reached level 2 of Farmville"? Basically, I'm asking any battle-worn Facebook app developers if my understanding of Facebook Apps is correct, or if I'm missing anything big here. It's my understanding that for security reasons (obviously) Facebook doesn't allow apps to customize anything outside of the iframe it lives in. So if I want my app to appear like it's "interacting" with its Facebook users, it looks like I just need to publish stuff to the users' news feeds to try and encourage people to use my app (please correct me if I'm wrong here!). Thanks in advance for any corrections, clarifications, advice or suggestions!

  Read the article

• Is there a way to make catalyst driver work in Trusty for the radeon hd4330?

  - by Laurent BERNABE

  Though official Catalyst software 13.1 is suitable for ati radeon hd4330, it can't be installed on Ubuntu 14.04 as it can't support Xorg = 7.6 As I need proprietary drivers for trusty, I would like to know if there is a way to bypass this limitation ? (For example by fetching driver sources) Here are some results from the terminal : $ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux bordeaux80 3.13.0-27-generic #50-Ubuntu SMP Thu May 15 18:06:16 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=4015e6f7-d11a-45fd-ac9b-5b6c7ab9eaa0 ro quiet splash vt.handoff=7 Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. $ xrandr Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 353mm x 198mm 1366x768 60.0*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 VGA-0 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) $ uname -rp 3.13.0-27-generic x86_64 $ glxinfo | grep OpenGL OpenGL vendor string: X.Org OpenGL renderer string: Gallium 0.4 on AMD RV710 OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.1.0 OpenGL core profile shading language version string: 1.40 OpenGL core profile context flags: (none) OpenGL core profile extensions: OpenGL version string: 3.0 Mesa 10.1.0 OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL extensions: Regards

  Read the article

• Second Monitor Detected, but not receiving a signal after upgrading to 12.04

  - by user62458

  After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

  Read the article

• What is wrong with my speculair phong shading

  - by Thijser

  I'm sorry if this should be placed on stackoverflow instead however seeing as this is graphics related I was hoping you guys could help me: I'm attempting to write a phong shader and currently working on the specular. I came acros the following formula: base*pow(dot(V,R),shininess) and attempted to implement it (V is the posion of the viewer and R the reflective vector). This gave the following result and code: Vec3Df phongSpecular(const Vec3Df & vertexPos, Vec3Df & normal, const Vec3Df & lightPos, const Vec3Df & cameraPos, unsigned int index) { Vec3Df relativeLightPos=(lightPos-vertexPos); relativeLightPos.normalize(); Vec3Df relativeCameraPos= (cameraPos-vertexPos); relativeCameraPos.normalize(); int DotOfNormalAndLight = Vec3Df::dotProduct(normal,relativeLightPos); Vec3Df reflective =(relativeLightPos-(2*DotOfNormalAndLight*normal))*-1; reflective.normalize(); float phongyness= Vec3Df::dotProduct(reflective,relativeCameraPos); if (phongyness<0){ phongyness=0; } float shininess= Shininess[index]; float speculair = powf(phongyness,shininess); return Ks[index]*speculair; } I'm looking for something more like this:

  Read the article

• loading a heightmap as texture in shader

  - by wtherapy

  I have a height map of 256x256, containing, foreach cell, not only height as a normal float value ( not 0-1 ) and also 2 gradient values ( for X and Y ), also as normal float values ( not 0-1 ). I have uploaded the texture via normal texture loading: glEnable( GL_TEXTURE_2D ); glGenTextures( 1, &m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glBindTexture( GL_TEXTURE_2D , m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexImage2D( GL_TEXTURE_2D, 0, GL_RGB32F, unW + 1, unH + 1, 0, GL_RGB, GL_FLOAT, pvBytes ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); as a parenthesis, the debug output is: Err 500 Err 0 Err 0 Err 0 Err 500 Err 500 Err 0 Err 0 pvBytes is a 256x256 array of typedef struct _tGradientHeightCell { float v; float px; float py; } TGradientHeightCell, *LPTGradientHeightCell; then, m_ugl_HeightMapTexture = glGetUniformLocation(m_uglProgram, "TexHeightMap"); I load it via: glEnable(GL_TEXTURE_2D ); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D , pTexture->GetID()); glUniform1i(m_ugl_HeightMapTexture, 0); in shader, I just access it: uniform sampler2D TexHeightMap; vec4 GetVertCellParameters( uint i, uint j ) { return texture( TexHeightMap, vec2( i, j ) ); } vec4 vH00 = GetVertCellParameters( i, j ); My problem is that, when passing negative values in one of the values in TGradientHeightCell ( v, px, py ), the texture is corrupted. I need the values to be passed exact as I have them in memory. Any help appreciated.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >