Search Results

Search found 45768 results on 1831 pages for 'system reactive'.

Page 47/1831 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • No operating system found even when grub2 was reinstalled

    - by Cruzer
    I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

    Read the article

  • My home partition slowly fills up until the system is unable to complete even simple tasks

    - by user973810
    So I have an awesome configuration on my home pc. My /home directory has its own partition. My home partition slowly fills up until the system is unable to complete even simple tasks. For example, when this issue has occured, I can load up firefox. It just pops up an error message saying that it cannot be done. Rebooting solves the issue. The strange thing is, I've run baobab and it doesn't notice a problem. There should be hundreds of gigabytes of data somewhere, but it doesn't see it. Does anyone have any idea of how I might troubleshoot this issue? I'm thinking I could do lsof but I've always found the output of that to be too much information. Maybe my drive is, like, dying. Edit: is there a /home analog of /var that gets cleared out at boot time? Maybe I could check in there next time I notice this problem to see if I can divine what's up. Update: I found the issue. my .xsession-errors file is filling up with Authentication deferred - ignoring client message Is there a way I can see what is causing this error and fix it?

    Read the article

  • Help with Design for Vacation Tracking System (C#/.NET/Access/WebServices/SOA/Excel) [closed]

    - by Aaronaught
    I have been tasked with developing a system for tracking our company's paid time-off (vacation, sick days, etc.) At the moment we are using an Excel spreadsheet on a shared network drive, and it works pretty well, but we are concerned that we won't be able to "trust" employees forever and sometimes we run into locking issues when two people try to open the spreadsheet at once. So we are trying to build something a little more robust. I would like some input on this design in terms of maintainability, scalability, extensibility, etc. It's a pretty simple workflow we need to represent right now: I started with a basic MS Access schema like this: Employees (EmpID int, EmpName varchar(50), AllowedDays int) Vacations (VacationID int, EmpID int, BeginDate datetime, EndDate datetime) But we don't want to spend a lot of time building a schema and database like this and have to change it later, so I think I am going to go with something that will be easier to expand through configuration. Right now the vacation table has this schema: Vacations (VacationID int, PropName varchar(50), PropValue varchar(50)) And the table will be populated with data like this: VacationID | PropName | PropValue -----------+--------------+------------------ 1 | EmpID | 4 1 | EmpName | James Jones 1 | Reason | Vacation 1 | BeginDate | 2/24/2010 1 | EndDate | 2/30/2010 1 | Destination | Spectate Swamp 2 | ... | ... I think this is a pretty good, extensible design, we can easily add new properties to the vacation like the destination or maybe approval status, etc. I wasn't too sure how to go about managing the database of valid properties, I thought of putting them in a separate PropNames table but it gets complicated to manage all the different data types and people say that you shouldn't put CLR type names into a SQL database, so I decided to use XML instead, here is the schema: <VacationProperties> <PropertyNames>EmpID,EmpName,Reason,BeginDate,EndDate,Destination</PropertyNames> <PropertyTypes>System.Int32,System.String,System.String,System.DateTime,System.DateTime,System.String</PropertyTypes> <PropertiesRequired>true,true,false,true,true,false</PropertiesRequired> </VacationProperties> I might need more fields than that, I'm not completely sure. I'm parsing the XML like this (would like some feedback on the parsing code): string xml = File.ReadAllText("properties.xml"); Match m = Regex.Match(xml, "<(PropertyNames)>(.*?)</PropertyNames>"; string[] pn = m.Value.Split(','); // do the same for PropertyTypes, PropertiesRequired Then I use the following code to persist configuration changes to the database: string sql = "DROP TABLE VacationProperties"; sql = sql + " CREATE TABLE VacationProperties "; sql = sql + "(PropertyName varchar(100), PropertyType varchar(100) "; sql = sql + "IsRequired varchar(100))"; for (int i = 0; i < pn.Length; i++) { sql = sql + " INSERT VacationProperties VALUES (" + pn[i] + "," + pt[i] + "," + pv[i] + ")"; } // GlobalConnection is a singleton new SqlCommand(sql, GlobalConnection.Instance).ExecuteReader(); So far so good, but after a few days of this I then realized that a lot of this was just a more specific kind of a generic workflow which could be further abstracted, and instead of writing all of this boilerplate plumbing code I could just come up with a workflow and plug it into a workflow engine like Windows Workflow Foundation and have the users configure it: In order to support routing these configurations throw the workflow system, it seemed natural to implement generic XML Web Services for this instead of just using an XML file as above. I've used this code to implement the Web Services: public class VacationConfigurationService : WebService { [WebMethod] public void UpdateConfiguration(string xml) { // Above code goes here } } Which was pretty easy, although I'm still working on a way to validate that XML against some kind of schema as there's no error-checking yet. I also created a few different services for other operations like VacationSubmissionService, VacationReportService, VacationDataService, VacationAuthenticationService, etc. The whole Service Oriented Architecture looks like this: And because the workflow itself might change, I have been working on a way to integrate the WF workflow system with MS Visio, which everybody at the office already knows how to use so they could make changes pretty easily. We have a diagram that looks like the following (it's kind of hard to read but the main items are Activities, Authenticators, Validators, Transformers, Processors, and Data Connections, they're all analogous to the services in the SOA diagram above). The requirements for this system are: (Note - I don't control these, they were given to me by management) Main workflow must interface with Excel spreadsheet, probably through VBA macros (to ease the transition to the new system) Alerts should integrate with MS Outlook, Lotus Notes, and SMS (text messages). We also want to interface it with the company Voice Mail system but that is not a "hard" requirement. Performance requirements: Must handle 250,000 Transactions Per Second Should be able to handle up to 20,000 employees (right now we have 3) 99.99% uptime ("four nines") expected Must be secure against outside hacking, but users cannot be required to enter a username/password. Platforms: Must support Windows XP/Vista/7, Linux, iPhone, Blackberry, DOS 2.0, VAX, IRIX, PDP-11, Apple IIc. Time to complete: 6 to 8 weeks. My questions are: Is this a good design for the system so far? Am I using all of the recommended best practices for these technologies? How do I integrate the Visio diagram above with the Windows Workflow Foundation to call the ConfigurationService and persist workflow changes? Am I missing any important components? Will this be extensible enough to support any scenario via end-user configuration? Will the system scale to the above performance requirements? Will we need any expensive hardware to run it? Are there any "gotchas" I should know about with respect to cross-platform compatibility? For example would it be difficult to convert this to an iPhone app? How long would you expect this to take? (We've dedicated 1 week for testing so I'm thinking maybe 5 weeks?) Many thanks for your advices, Aaron

    Read the article

  • Design for Vacation Tracking System

    - by Aaronaught
    I have been tasked with developing a system for tracking our company's paid time-off (vacation, sick days, etc.) At the moment we are using an Excel spreadsheet on a shared network drive, and it works pretty well, but we are concerned that we won't be able to "trust" employees forever and sometimes we run into locking issues when two people try to open the spreadsheet at once. So we are trying to build something a little more robust. I would like some input on this design in terms of maintainability, scalability, extensibility, etc. It's a pretty simple workflow we need to represent right now: I started with a basic MS Access schema like this: Employees (EmpID int, EmpName varchar(50), AllowedDays int) Vacations (VacationID int, EmpID int, BeginDate datetime, EndDate datetime) But we don't want to spend a lot of time building a schema and database like this and have to change it later, so I think I am going to go with something that will be easier to expand through configuration. Right now the vacation table has this schema: Vacations (VacationID int, PropName varchar(50), PropValue varchar(50)) And the table will be populated with data like this: VacationID | PropName | PropValue -----------+--------------+------------------ 1 | EmpID | 4 1 | EmpName | James Jones 1 | Reason | Vacation 1 | BeginDate | 2/24/2010 1 | EndDate | 2/30/2010 1 | Destination | Spectate Swamp 2 | ... | ... I think this is a pretty good, extensible design, we can easily add new properties to the vacation like the destination or maybe approval status, etc. I wasn't too sure how to go about managing the database of valid properties, I thought of putting them in a separate PropNames table but it gets complicated to manage all the different data types and people say that you shouldn't put CLR type names into a SQL database, so I decided to use XML instead, here is the schema: <VacationProperties> <PropertyNames>EmpID,EmpName,Reason,BeginDate,EndDate,Destination</PropertyNames> <PropertyTypes>System.Int32,System.String,System.String,System.DateTime,System.DateTime,System.String</PropertyTypes> <PropertiesRequired>true,true,false,true,true,false</PropertiesRequired> </VacationProperties> I might need more fields than that, I'm not completely sure. I'm parsing the XML like this (would like some feedback on the parsing code): string xml = File.ReadAllText("properties.xml"); Match m = Regex.Match(xml, "<(PropertyNames)>(.*?)</PropertyNames>"; string[] pn = m.Value.Split(','); // do the same for PropertyTypes, PropertiesRequired Then I use the following code to persist configuration changes to the database: string sql = "DROP TABLE VacationProperties"; sql = sql + " CREATE TABLE VacationProperties "; sql = sql + "(PropertyName varchar(100), PropertyType varchar(100) "; sql = sql + "IsRequired varchar(100))"; for (int i = 0; i < pn.Length; i++) { sql = sql + " INSERT VacationProperties VALUES (" + pn[i] + "," + pt[i] + "," + pv[i] + ")"; } // GlobalConnection is a singleton new SqlCommand(sql, GlobalConnection.Instance).ExecuteReader(); So far so good, but after a few days of this I then realized that a lot of this was just a more specific kind of a generic workflow which could be further abstracted, and instead of writing all of this boilerplate plumbing code I could just come up with a workflow and plug it into a workflow engine like Windows Workflow Foundation and have the users configure it: In order to support routing these configurations throw the workflow system, it seemed natural to implement generic XML Web Services for this instead of just using an XML file as above. I've used this code to implement the Web Services: public class VacationConfigurationService : WebService { [WebMethod] public void UpdateConfiguration(string xml) { // Above code goes here } } Which was pretty easy, although I'm still working on a way to validate that XML against some kind of schema as there's no error-checking yet. I also created a few different services for other operations like VacationSubmissionService, VacationReportService, VacationDataService, VacationAuthenticationService, etc. The whole Service Oriented Architecture looks like this: And because the workflow itself might change, I have been working on a way to integrate the WF workflow system with MS Visio, which everybody at the office already knows how to use so they could make changes pretty easily. We have a diagram that looks like the following (it's kind of hard to read but the main items are Activities, Authenticators, Validators, Transformers, Processors, and Data Connections, they're all analogous to the services in the SOA diagram above). The requirements for this system are: (Note - I don't control these, they were given to me by management) Main workflow must interface with Excel spreadsheet, probably through VBA macros (to ease the transition to the new system) Alerts should integrate with MS Outlook, Lotus Notes, and SMS (text messages). We also want to interface it with the company Voice Mail system but that is not a "hard" requirement. Performance requirements: Must handle 250,000 Transactions Per Second Should be able to handle up to 20,000 employees (right now we have 3) 99.99% uptime ("four nines") expected Must be secure against outside hacking, but users cannot be required to enter a username/password. Platforms: Must support Windows XP/Vista/7, Linux, iPhone, Blackberry, DOS 2.0, VAX, IRIX, PDP-11, Apple IIc. Time to complete: 6 to 8 weeks. My questions are: Is this a good design for the system so far? Am I using all of the recommended best practices for these technologies? How do I integrate the Visio diagram above with the Windows Workflow Foundation to call the ConfigurationService and persist workflow changes? Am I missing any important components? Will this be extensible enough to support any scenario via end-user configuration? Will the system scale to the above performance requirements? Will we need any expensive hardware to run it? Are there any "gotchas" I should know about with respect to cross-platform compatibility? For example would it be difficult to convert this to an iPhone app? How long would you expect this to take? (We've dedicated 1 week for testing so I'm thinking maybe 5 weeks?)

    Read the article

  • System.Reflection - Global methods aren't available for reflection

    - by mrjoltcola
    I have an issue with a semantic gap between the CLR and System.Reflection. System.Reflection does not (AFAIK) support reflecting on global methods in an assembly. At the assembly level, I must start with the root types. My compiler can produce assemblies with global methods, and my standard bootstrap lib is a dll that includes some global methods. My compiler uses System.Reflection to import assembly metadata at compile time. It seems if I depend on System.Reflection, global methods are not a possibility. The cleanest solution is to convert all of my standard methods to class static methods, but the point is, my language allows global methods, and the CLR supports it, but System.Reflection leaves a gap. ildasm shows the global methods just fine, but I assume it does not use System.Reflection itself and goes right to the metadata and bytecode. Besides System.Reflection, is anyone aware of any other 3rd party reflection or disassembly libs that I could make use of (assuming I will eventually release my compiler as free, BSD licensed open source).

    Read the article

  • System.Diaganostics.Process.Id Isn't the Same Process Id Shown in Task Manger. Why?

    - by LonnieBest
    I'm using c#'s System.Diagnostic.Process object. One of its properties is Id. The Id this produces is not the same as the PID, shown in Windows Task Manager. Why is this? You see, once this process is started. It launches two other unmanaged processes, for which I can't explicitly get IDs for by object property references. I have to search through all processes to find them by process name via System.Diagnostics.Process.GetProcesses(). I'm trying to find a reliable way to kill this process and all associated processes by PID, the one that shows in Task Manager. Is there a better way? I can't just kill all processes with the associated process names, because that might kill other instances of those processes that have nothing to do with my program.

    Read the article

  • Is System.AddIn mostly about making it easier to use Remoting or does it make it harder to do so?

    - by MatthewMartin
    It takes at least 7 assemblies and restricting my AddIn's data model to data types that remoting can deal with before the appdomain isolation features begin to work. It is so complex! The System.AddIn teams blog implies to me they were trying to re-create a mental model of COM, a model I never understood very well in the first place and am not sold on the benefits. (If COM is so good why's it dead?-rhetorical question.) If I don't need to mirror or interop with legacy COM (like VSTO does using System.AddIn), is it possible to just create some classes that load load in a new AppDomain? I can write the discovery code my self, I've done it before and a naive implementation is pretty fast because I'm not like iterating over the assemblies in the GAC! So my specific question is, can I get the AppDomain isolation that AddIns provide with a few code Remoting snippets, and what would those be?

    Read the article

  • If I specify a System property multiple times when invoking JVM which value is used?

    - by RobV
    If I specify a system property multiple times when invoking the JVM which value will I actually get when I retrieve the property? e.g. java -Dprop=A -Dprop=B -jar my.jar What will be the result when I call System.getProperty("prop");? The Java documentation on this does not really tell me anything useful on this front. In my non-scientific testing on a couple of machines running different JVMs it seems like the last value is the one returned (which is actually the behavior I need) but I wondered if this behavior is actually defined officially anywhere or can it vary between JVMs?

    Read the article

  • How to run an executable as a system service?

    - by byanity
    I've got a file and data distribution application written in .NET 2.0 I've written similar to Steam. This application will need to run in Windows 7 and will need to be able to run and install applications that require administrator rights. However the users will not have admin rights. My thought was to run the application as a Local System Service. I figured by doing this the application could perform admin rights actions (registry edits, launching apps, etc) when the user isn't an admin. Are my assumptions correct? What steps do I need to take to have this app install as a Local System Service? An Administrator will be installing the application but it will be run by a user without Administrator rights. Thanks in advance!

    Read the article

  • MS DOS function like ipconfig to get system performance specs?

    - by JustADude
    I am aware of MSINFO32, but I'm wondering if there is a MS DOS command similar to ipconfig in order to get system specifications? I would like for the system specifications to be displayed in the MS DOS prompt. I would like to see at least: CPU RAM BUS speed Thanks for any insights. Edit: I am unable to install any other software, so just have to use existing DOS programming commands to extract this information. Thank you again. 2nd Edit: Whoops. Using Windows XP and Windows Vista.

    Read the article

  • Replacing “if”s with your own number system

    - by Michael Williamson
    During our second code retreat at Red Gate, the restriction for one of the sessions was disallowing the use of if statements. That includes other constructs that have the same effect, such as switch statements or loops that will only be executed zero or one times. The idea is to encourage use of polymorphism instead, and see just how far it can be used to get rid of “if”s. The main place where people struggled to get rid of numbers from their implementation of Conway’s Game of Life was the piece of code that decides whether a cell is live or dead in the next generation. For instance, for a cell that’s currently live, the code might look something like this: if (numberOfNeighbours == 2 || numberOfNeighbours == 3) { return CellState.LIVE; } else { return CellState.DEAD; } The problem is that we need to change behaviour depending on the number of neighbours each cell has, but polymorphism only allows us to switch behaviour based on the type of a value. It follows that the solution is to make different numbers have different types: public interface IConwayNumber { IConwayNumber Increment(); CellState LiveCellNextGeneration(); } public class Zero : IConwayNumber { public IConwayNumber Increment() { return new One(); } public CellState LiveCellNextGeneration() { return CellState.DEAD; } } public class One : IConwayNumber { public IConwayNumber Increment() { return new Two(); } public CellState LiveCellNextGeneration() { return CellState.LIVE; } } public class Two : IConwayNumber { public IConwayNumber Increment() { return new ThreeOrMore(); } public CellState LiveCellNextGeneration() { return CellState.LIVE; } } public class ThreeOrMore : IConwayNumber { public IConwayNumber Increment() { return this; } public CellState LiveCellNextGeneration() { return CellState.DEAD; } } In the code that counts the number of neighbours, we use our new number system by starting with Zero and incrementing when we find a neighbour. To choose the next state of the cell, rather than inspecting the number of neighbours, we ask the number of neighbours for the next state directly: return numberOfNeighbours.LiveCellNextGeneration(); And now we have no “if”s! If C# had double-dispatch, or if we used the visitor pattern, we could move the logic for choosing the next cell out of the number classes, which might feel a bit more natural. I suspect that reimplementing the natural numbers is still going to feel about the same amount of crazy though.

    Read the article

  • Best Practice for Software Maintenance Console

    - by Ben-G
    I am looking for a list of must-have maintenance/administration features/components/services for enterprise applications. I know following common components: Configuration Cockpit (shows current configuration mistakes/issues) Load-Analysis (shows the current load on different system components) Vitality measures Log File Access System Restart Capability Backup/Restore Capability Are there any widely accepted services/features which are included in any software with a focus on reliablity and maintainability?

    Read the article

  • Package system broken - E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by delha
    After installing some packages and libraries I have an error on Package Manager, I can't run any update because it says: "The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f " I've tried to do what it says and it returns me: jara@jara-Aspire-5738:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libcaca-dev libopencv2.3-bin nite-dev python-bluez ps-engine libslang2-dev python-sphinx ros-electric-geometry-tutorials ros-electric-geometry-visualization python-matplotlib libzzip-dev ros-electric-orocos-kinematics-dynamics ros-electric-physics-ode libbluetooth-dev libaudiofile-dev libassimp2 libnetpbm10-dev ros-electric-laser-pipeline python-epydoc ros-electric-geometry-experimental libasound2-dev evtest python-matplotlib-data libyaml-dev ros-electric-bullet ros-electric-executive-smach ros-electric-documentation libgl2ps0 libncurses5-dev ros-electric-robot-model texlive-fonts-recommended python-lxml libwxgtk2.8-dev daemontools libxxf86vm-dev libqhull-dev libavahi-client-dev ros-electric-geometry libgl2ps-dev libcurl4-openssl-dev assimp-dev libusb-1.0-0-dev libopencv2.3 ros-electric-diagnostics-monitors libsdl1.2-dev libjs-underscore libsdl-image1.2 tipa libusb-dev libtinfo-dev python-tz python-sip libfltk1.1 libesd0 libfreeimage-dev ros-electric-visualization x11proto-xf86vidmode-dev python-docutils libvtk5.6 ros-electric-assimp x11proto-scrnsaver-dev libnetcdf-dev libidn11-dev libeigen3-dev joystick libhdf5-serial-1.8.4 ros-electric-joystick-drivers texlive-fonts-recommended-doc esound-common libesd0-dev tcl8.5-dev ros-electric-multimaster-experimental ros-electric-rx libaudio-dev ros-electric-ros-tutorials libwxbase2.8-dev ros-electric-visualization-common python-sip-dev ros-electric-visualization-tutorials libfltk1.1-dev libpulse-dev libnetpbm10 python-markupsafe openni-dev tk8.5-dev wx2.8-headers freeglut3-dev libavahi-common-dev python-roman python-jinja2 ros-electric-robot-model-visualization libxss-dev libqhull5 libaa1-dev ros-electric-eigen freeglut3 ros-electric-executive-smach-visualization ros-electric-common-tutorials ros-electric-robot-model-tutorials libnetcdf6 libjs-sphinxdoc python-pyparsing libaudiofile0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libcv-dev The following NEW packages will be installed libcv-dev 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 2 not fully installed or removed. Need to get 0 B/3,114 kB of archives. After this operation, 11.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 261801 files and directories currently installed.) Unpacking libcv-dev (from .../libcv-dev_2.1.0-7build1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb (-- unpack): trying to overwrite '/usr/bin/opencv_haartraining', which is also in package libopencv2.3-bin 2.3.1+svn6514+branch23-12~oneiric dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried everything people recommend on internet like: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install Also I've tried to install the synaptic manager but it doesn't let me install anything.. As you can see nothing works so I'm desperate! I'm using ubuntu 11.10, 64 bits Thanks!!

    Read the article

  • State / Screen management in Entity Component Systems

    - by David Lively
    My entity/component system is happily humming along and, despite some performance concerns I initially had, everything is working fine. However, I've realized that I missed a crucial point when starting this thing: how do you handle different screens? At the moment, I have a GameManager class which owns a component manager and entity manager. When I create an entity, the entity manager assigns it an ID and makes sure it's tracked. When I modify the components that are assigned to an entity. an UpdateEntity method is called, which alerts each of the systems that they may need to add or remove the entity from their respective entity lists. A problem with this is that the collection of entities operated on by each system is determined solely by the individual Systems, typically based on a "required component" filter. (An entity has to have a Renderable component to be rendered, for instance.) In this situation, I can't just keep collections of entities per screen and only Update/Draw those collections. They'd have to either be added and removed depending on their applicability to the current screen, which would cause their associated components to be removed, or enable/disable entities in a group per screen to hide what's not supposed to be visible. These approaches seem like really, really crappy kludges. What's a good way to handle this? A pretty straightforward way that comes to mind is to create a separate GameManager (which in my implementation owns all of the systems, entities, etc.) per screen, which means that everything outside of the device context would be duplicated. That's bothersome because some things are always visible, or I might want to continue to display the game under a translucent menu window. Another option would be to add a "layer" key to the GameManager class, which could be checked against a displayable layer stack held by the game manager. *System.Draw() would be called for each active layer, in the required order as determined by the stack. When the systems request an iterator for their respective entity collections, it would be pre-filtered to a (cached) set of those entities that participate in the active layer. Those collections could be updated from the same UpdateEntity event that's already used to maintain each system's entity collections. Still, kinda feels like a hack. If I've coded myself into a corner, feel free to throw tomatoes as long as they're labeled with a helpful suggestion. Hooray for learning curves.

    Read the article

  • Unable to acces sound settings

    - by Dumitru Cristian
    I’m unable to access the sound settings in U1404 TT. Before updating to Ubuntu 14.04, with right click and System setting I had access to some settings which allowed me to set different sound levels for different application. Now I'm unable to do that. Click on Sound settings send me to a Setting window where sound settings are not available. Actually, as you can see, my system settings menu is quite reduced (no options for keyboard).

    Read the article

  • How do I find out which boot loader I have?

    - by binW
    I know Grub is the one installed by default when installing Ubuntu but I am faced with an embedded system running 9.10 Desktop Edition. Following are the contents of lsb-release file ubuntu@ubuntu-desktop:/boot$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.10 DISTRIB_CODENAME=karmic DISTRIB_DESCRIPTION="Ubuntu 9.10" but this system does not have Grub bootloader and I want to find out which one its using. So any ideas?

    Read the article

  • Is Grub installed when Ubuntu is the only OS installed?

    - by Dennis
    I have a simple question concerning Grub. When Ubuntu it's the only system installed on a machine, Grub doesn't appear when the computer it's turned on, my question is: When Ubuntu is the only system, Grub it's not installed on MBR? I has this doubt when I tried the ASPM command in Grub, to see if it could save some battery on my notebook, and the difference was only 0.4W. I don't even know if it made some effect or it's just a normal oscilation. Thanks.

    Read the article

  • Particle System in XNA - cannot draw particle

    - by Dave Voyles
    I'm trying to implement a simple particle system in my XNA project. I'm going by RB Whitaker's tutorial, and it seems simple enough. I'm trying to draw particles within my menu screen. Below I've included the code which I think is applicable. I'm coming up with one error in my build, and it is stating that I need to create a new instance of the EmitterLocation from the particleEngine. When I hover over particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); it states that particleEngine is returning a null value. What could be causing this? /// <summary> /// Base class for screens that contain a menu of options. The user can /// move up and down to select an entry, or cancel to back out of the screen. /// </summary> abstract class MenuScreen : GameScreen ParticleEngine particleEngine; public void LoadContent(ContentManager content) { if (content == null) { content = new ContentManager(ScreenManager.Game.Services, "Content"); } base.LoadContent(); List<Texture2D> textures = new List<Texture2D>(); textures.Add(content.Load<Texture2D>(@"gfx/circle")); textures.Add(content.Load<Texture2D>(@"gfx/star")); textures.Add(content.Load<Texture2D>(@"gfx/diamond")); particleEngine = new ParticleEngine(textures, new Vector2(400, 240)); } public override void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { base.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); // Update each nested MenuEntry object. for (int i = 0; i < menuEntries.Count; i++) { bool isSelected = IsActive && (i == selectedEntry); menuEntries[i].Update(this, isSelected, gameTime); } particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); particleEngine.Update(); } public override void Draw(GameTime gameTime) { // make sure our entries are in the right place before we draw them UpdateMenuEntryLocations(); GraphicsDevice graphics = ScreenManager.GraphicsDevice; SpriteBatch spriteBatch = ScreenManager.SpriteBatch; SpriteFont font = ScreenManager.Font; spriteBatch.Begin(); // Draw stuff logic spriteBatch.End(); particleEngine.Draw(spriteBatch); }

    Read the article

  • TreeView in Winforms and focus problem

    - by Marcus
    Hi, Can anyone please explain to my why the form in the code below gets out of focus when selecting a treenode in the tree? What should happen is that the form/button should get the focus when the tree disappears like the listview example but it doesn't. Code example: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; namespace FocusTest { public partial class Form1 : Form { #region Generated /// <summary> /// Required designer variable. /// </summary> private System.ComponentModel.IContainer components = null; /// <summary> /// Clean up any resources being used. /// </summary> /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param> protected override void Dispose(bool disposing) { if (disposing && (components != null)) { components.Dispose(); } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.Windows.Forms.ListViewItem listViewItem1 = new System.Windows.Forms.ListViewItem("Item1"); System.Windows.Forms.ListViewItem listViewItem2 = new System.Windows.Forms.ListViewItem("Item2"); System.Windows.Forms.ListViewItem listViewItem3 = new System.Windows.Forms.ListViewItem("Item3"); System.Windows.Forms.TreeNode treeNode1 = new System.Windows.Forms.TreeNode("Node0"); System.Windows.Forms.TreeNode treeNode2 = new System.Windows.Forms.TreeNode("Node1"); System.Windows.Forms.TreeNode treeNode3 = new System.Windows.Forms.TreeNode("Node2"); this.button1 = new System.Windows.Forms.Button(); this.listView1 = new System.Windows.Forms.ListView(); this.button2 = new System.Windows.Forms.Button(); this.treeView1 = new System.Windows.Forms.TreeView(); this.SuspendLayout(); // // button1 // this.button1.Location = new System.Drawing.Point(12, 12); this.button1.Name = "button1"; this.button1.Size = new System.Drawing.Size(75, 23); this.button1.TabIndex = 0; this.button1.Text = "button1"; this.button1.UseVisualStyleBackColor = true; this.button1.Click += new System.EventHandler(this.button1_Click); // // listView1 // this.listView1.Items.AddRange(new System.Windows.Forms.ListViewItem[] { listViewItem1, listViewItem2, listViewItem3 }); this.listView1.Location = new System.Drawing.Point(12, 41); this.listView1.Name = "listView1"; this.listView1.Size = new System.Drawing.Size(121, 97); this.listView1.TabIndex = 1; this.listView1.UseCompatibleStateImageBehavior = false; this.listView1.Visible = false; this.listView1.SelectedIndexChanged += new System.EventHandler(this.listView1_SelectedIndexChanged); this.listView1.View = View.List; // // button2 // this.button2.Location = new System.Drawing.Point(310, 11); this.button2.Name = "button2"; this.button2.Size = new System.Drawing.Size(75, 23); this.button2.TabIndex = 2; this.button2.Text = "button2"; this.button2.UseVisualStyleBackColor = true; this.button2.Click += new System.EventHandler(this.button2_Click); // // treeView1 // this.treeView1.Location = new System.Drawing.Point(310, 41); this.treeView1.Name = "treeView1"; treeNode1.Name = "Node0"; treeNode1.Text = "Node0"; treeNode2.Name = "Node1"; treeNode2.Text = "Node1"; treeNode3.Name = "Node2"; treeNode3.Text = "Node2"; this.treeView1.Nodes.AddRange(new System.Windows.Forms.TreeNode[] { treeNode1, treeNode2, treeNode3}); this.treeView1.Size = new System.Drawing.Size(121, 97); this.treeView1.TabIndex = 3; this.treeView1.Visible = false; this.treeView1.AfterSelect += new System.Windows.Forms.TreeViewEventHandler(this.treeView1_AfterSelect); // // Form1 // this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F); this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font; this.ClientSize = new System.Drawing.Size(760, 409); this.Controls.Add(this.treeView1); this.Controls.Add(this.button2); this.Controls.Add(this.listView1); this.Controls.Add(this.button1); this.Name = "Form1"; this.Text = "Form1"; this.ResumeLayout(false); } #endregion private System.Windows.Forms.Button button1; private System.Windows.Forms.ListView listView1; private System.Windows.Forms.Button button2; private System.Windows.Forms.TreeView treeView1; #endregion public Form1() { InitializeComponent(); } #region TreeView private void button2_Click(object sender, EventArgs e) { ToggleTreeView(); } private void ToggleTreeView() { if (treeView1.Visible) { Controls.Remove(treeView1); treeView1.Visible = false; } else { Controls.Add(treeView1); treeView1.Size = new Size(300, 400); treeView1.Location = PointToClient(PointToScreen(new System.Drawing.Point(button2.Location.X, button2.Location.Y + button2.Height))); this.treeView1.BringToFront(); treeView1.Visible = true; treeView1.Select(); } } private void treeView1_AfterSelect(object sender, TreeViewEventArgs e) { ToggleTreeView(); } #endregion #region ListView private void button1_Click(object sender, EventArgs e) { ToggleListView(); } private void ToggleListView() { if (listView1.Visible) { Controls.Remove(listView1); listView1.Visible = false; } else { Controls.Add(listView1); listView1.Size = new Size(300, 400); listView1.Location = PointToClient(PointToScreen(new System.Drawing.Point(button1.Location.X, button1.Location.Y + button1.Height))); this.listView1.BringToFront(); listView1.Visible = true; listView1.Select(); } } private void listView1_SelectedIndexChanged(object sender, EventArgs e) { if (listView1.Visible) ToggleListView(); } #endregion } }

    Read the article

  • IIS 7.5 Manager crashes when adding a custom error page

    - by dig412
    I'm running a local IIS 7.5 server in Win 7 Pro, and I'm trying to add a custom error page for 403 responses. When I click OK to add a custom error page for my site, IIS Manager just vanishes. The server is still running, and I can re-start IIS Manager, but the new page has not been saved. I've also tried adding it directly to web.config, but that just gives me The page cannot be displayed because an internal server error has occurred. Does anyone know why this might be happening? Edit: The event log implies that an invalid character in the path caused the crash, but It occured even when I copied & pasted a path from a valid entry. Application error log: IISMANAGER_CRASH IIS Manager terminated unexpectedly. Exception:System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. --- System.ArgumentException: Illegal characters in path. at System.IO.Path.CheckInvalidPathChars(String path) at System.IO.Path.IsPathRooted(String path) at Microsoft.Web.Management.Iis.CustomErrors.CustomErrorsForm.OnAccept() at Microsoft.Web.Management.Client.Win32.TaskForm.OnOKButtonClick(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Form.ShowDialog(IWin32Window owner) at Microsoft.Web.Management.Host.UserInterface.ManagementUIService.ShowDialogInternal(Form form, IWin32Window parent) at Microsoft.Web.Management.Host.UserInterface.ManagementUIService.Microsoft.Web.Management.Client.Win32.IManagementUIService.ShowDialog(DialogForm form) at Microsoft.Web.Management.Client.Win32.ModulePage.ShowDialog(DialogForm form) at Microsoft.Web.Management.Iis.CustomErrors.CustomErrorsPage.AddCustomError() --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at Microsoft.Web.Management.Client.TaskList.InvokeMethod(String methodName, Object userData) at Microsoft.Web.Management.Host.UserInterface.Tasks.MethodTaskItemLine.InvokeMethod() at System.Windows.Forms.LinkLabel.OnMouseUp(MouseEventArgs e) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Label.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.Web.Management.Host.Shell.ShellApplication.Execute(Boolean localDevelopmentMode, Boolean resetPreferences, Boolean resetPreferencesNoLaunch) Process:InetMgr

    Read the article

  • I can't update my system properly, "no package header" error

    - by joel
    Every time I try to run sudo apt-get update or try running updates from the GUI interface I run into the following problem or something similar: Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_restricted_binary-i386_Packages E: The package lists or status file could not be parsed or opened. I've tried purging using sudo rm -rf <filename> where <filename> is the listed file above, and then running sudo apt-get update to fix it (as listed elsewhere in this forum) and no luck, just keep getting this message. I'm running Ubuntu 12.04 and this is getting really frustrating... I just want a system that runs smoothly and doesn't require it's hand to be held when it comes to updates. Tried the solutions posted below and am still receiving the same errors, sample output: W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-amd64_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_restricted_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_multiverse_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_source_Sources Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_source_Sources Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_universe_binary-amd64_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_main_i18n_Translation-en Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_universe_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header E: Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • Improving performance of a particle system (OpenGL ES)

    - by Jason
    I'm in the process of implementing a simple particle system for a 2D mobile game (using OpenGL ES 2.0). It's working, but it's pretty slow. I start getting frame rate battering after about 400 particles, which I think is pretty low. Here's a summary of my approach: I start with point sprites (GL_POINTS) rendered in a batch just using a native float buffer (I'm in Java-land on Android, so that translates as a java.nio.FloatBuffer). On GL context init, the following are set: GLES20.glViewport(0, 0, width, height); GLES20.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GLES20.glEnable(GLES20.GL_CULL_FACE); GLES20.glDisable(GLES20.GL_DEPTH_TEST); Each draw frame sets the following: GLES20.glEnable(GLES20.GL_BLEND); GLES20.glBlendFunc(GLES20.GL_ONE, GLES20.GL_ONE_MINUS_SRC_ALPHA); And I bind a single texture: GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureHandle); GLES20.glUniform1i(mUniformTextureHandle, 0); Which is just a simple circle with some blur (and hence some transparency) http://cl.ly/image/0K2V2p2L1H2x Then there are a bunch of glVertexAttribPointer calls: mBuffer.position(position); mGlEs20.glVertexAttribPointer(mAttributeRGBHandle, valsPerRGB, GLES20.GL_FLOAT, false, stride, mBuffer); ...4 more of these Then I'm drawing: GLES20.glUniformMatrix4fv(mUniformProjectionMatrixHandle, 1, false, Camera.mProjectionMatrix, 0); GLES20.glDrawArrays(GLES20.GL_POINTS, 0, drawCalls); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); My vertex shader does have some computation in it, but given that they're point sprites (with only 2 coordinate values) I'm not sure this is the problem: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform mat4 u_ProjectionMatrix; attribute vec4 a_Position; attribute float a_PointSize; attribute vec3 a_RGB; attribute float a_Alpha; attribute float a_Burn; varying vec4 v_Color; void main() { vec3 v_FGC = a_RGB * a_Alpha; v_Color = vec4(v_FGC.x, v_FGC.y, v_FGC.z, a_Alpha * (1.0 - a_Burn)); gl_PointSize = a_PointSize; gl_Position = u_ProjectionMatrix * a_Position; } My fragment shader couldn't really be simpler: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform sampler2D u_Texture; varying vec4 v_Color; void main() { gl_FragColor = texture2D(u_Texture, gl_PointCoord) * v_Color; } That's about it. I had read that transparent pixels in point sprites can cause issues, but surely not at only 400 points? I'm running on a fairly new device (12 month old Galaxy Nexus). My question is less about my approach (although I'm open to suggestion) but more about whether there are any specific OpenGL "no no's" that have leaked into my code. I'm sure there's GL master out there facepalming right now... I'd love to hear any critique.

    Read the article

  • SQL SERVER – Identifying Column Data Type of uniqueidentifier without Querying System Tables

    - by pinaldave
    I love interesting conversations with related to SQL Server. One of my friends Madhivanan always comes up with an interesting point of conversation. Here is one of the conversation between us. I am very confident this blog post will for sure enable you with some new knowledge. Madhi: How do I know if any table has a uniqueidentifier column used in it? Pinal:  I am sure you know that you can do it through some DMV or catalogue views. Madhi: I know that but how can we do that without using DMV or catalogue views? Pinal: Hm… what can I use? Madhi: You can use table name. Pinal: Easy, just say SELECT YourUniqueIdentCol FROM Table. Madhi: Hold on, the question seems to be not clear to you – you do know the name of the column. The matter of the fact, you do not know if the table has uniqueidentifier column. Only information you have is table name. Pinal: Madhi, this seems like you are changing the question when I am close to answer. Madhi: Well, are you clear now? Let me say it again – How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is table name and you are allowed to return any kind of error if table does not have uniqueidentifier column. Pinal: Do you know the answer? Madhi: Yes. I just wanted to test your knowledge about SQL. Pinal: I will have to think. Let me accept I do not know it right away. Can you share the answer please? Madhi: I won! Here it goes! Pinal: When I have friends like you – who needs enemies? Madhi: (laughter which did not stop for a minute). CREATE TABLE t ( GuidCol UNIQUEIDENTIFIER DEFAULT newsequentialid() ROWGUIDCOL, data VARCHAR(60) ) INSERT INTO t (data) SELECT 'test' INSERT INTO t (data) SELECT 'test1' SELECT $rowguid FROM t DROP TABLE t This is indeed very interesting to me. Please note that this is not the optimal way and there will be many other ways to retrieve uniqueidentifier name and value. What I learned from this was if I am in a rush to check if the table has uniqueidentifier and I do not know the name of the same, I can use SELECT TOP (1) $rowguid and quickly know the name of the column. I can later use the same columnname in my query. Madhi did teach me this new trick. Did you know this? What are other ways to get the check uniqueidentifier column existence in a database? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Introducing the First Global Web Experience Management Content Management System

    - by kellsey.ruppel
    By Calvin Scharffs, VP of Marketing and Product Development, Lingotek Globalizing online content is more important than ever. The total spending power of online consumers around the world is nearly $50 trillion, a recent Common Sense Advisory report found. Three years ago, enterprises would have to translate content into 37 language to reach 98 percent of Internet users. This year, it takes 48 languages to reach the same amount of users.  For companies seeking to increase global market share, “translate frequently and fast” is the name of the game. Today’s content is dynamic and ever-changing, covering the gamut from social media sites to company forums to press releases. With high-quality translation and localization, enterprises can tailor content to consumers around the world.  Speed and Efficiency in Translation When it comes to the “frequently and fast” part of the equation, enterprises run into problems. Professional service providers provide translated content in files, which company workers then have to manually insert into their CMS. When companies update or edit source documents, they have to hunt down all the translated content and change each document individually.  Lingotek and Oracle have solved the problem by making the Lingotek Collaborative Translation Platform fully integrated and interoperable with Oracle WebCenter Sites Web Experience Management. Lingotek combines best-in-class machine translation solutions, real-time community/crowd translation and professional translation to enable companies to publish globalized content in an efficient and cost-effective manner. WebCenter Sites Web Experience Management simplifies the creation and management of different types of content across multiple channels, including social media.  Globalization Without Interrupting the Workflow The combination of the Lingotek platform with WebCenter Sites ensures that process of authoring, publishing, targeting, optimizing and personalizing global Web content is automated, saving companies the time and effort of manually entering content. Users can seamlessly integrate translation into their WebCenter Sites workflows, optimizing their translation and localization across web, social and mobile channels in multiple languages. The original structure and formatting of all translated content is maintained, saving workers the time and effort involved with inserting the text translation and reformatting.  In addition, Lingotek’s continuous publication model addresses the dynamic nature of content, automatically updating the status of translated documents within the WebCenter Sites Workflow whenever users edit or update source documents. This enables users to sync translations in real time. The translation, localization, updating and publishing of Web Experience Management content happens in a single, uninterrupted workflow.  The net result of Lingotek Inside for Oracle WebCenter Sites Web Experience Management is a system that more than meets the need for frequent and fast global translation. Workflows are accelerated. The globalization of content becomes faster and more streamlined. Enterprises save time, cost and effort in translation project management, and can address the needs of each of their global markets in a timely and cost-effective manner.  About Lingotek Lingotek is an Oracle Gold Partner and is going to be one of the first Oracle Validated Integrator (OVI) partners with WebCenter Sites. Lingotek is also an OVI partner with Oracle WebCenter Content.  Watch a video about how Lingotek Inside for Oracle WebCenter Sites works! Oracle WebCenter will be hosting a webinar, “Hitachi Data Systems Improves Global Web Experiences with Oracle WebCenter," tomorrow, September 13th. To attend the webinar, please register now! For more information about Lingotek for Oracle WebCenter, please visit http://www.lingotek.com/oracle.

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >