Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 47/1004 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Why is my external USB hard drive sometimes completely inaccessible?

  - by Eliah Kagan

  I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• How do I stop my ethernet network connection from dropping?

  - by Sean Hill

  My ethernet-based network connection doesn't stay up consistently. I'm running a ping against the gateway and it will: Work for a minute Freeze, time out, or give multi-second response times Repeat If it's stuck and I disable/enable networking through the network manager applet everything will work fine again for a minute. After 280 packets transmitted I'm getting 41% packet loss. I've tried a different cable and connection to the gateway but this had no effect. The distance to the gateway is just about 3 feet. Seems to work fine if I switch over to Windows, but Ubuntu is my main OS and I can't even use it right now as I depend on the network. My setup... OS: Ubuntu 11.04, dual-booting Windows 7 Mobo: Gigabyte Z68X-UD4-B3 CPU: Intel Core i7 2600K Edit A little clarification... Network Manager is still showing me as connected, but I am unable to reach to gateway or anything beyond. At no point does NM suggest the connection is lost and calling ifconfig shows that I still have an IP address. I tried connecting to a different gateway with a different cable and the same problem arises. As requested: lspci | grep -i eth 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -f [ 14.024709] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.026443] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 14.176101] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. [ 23.917731] eth0: no IPv6 routers present [ 726.109697] r8169 0000:07:00.0: eth0: link up [ 733.169494] r8169 0000:07:00.0: eth0: link up [ 753.930119] r8169 0000:07:00.0: eth0: link up [ 880.787332] r8169 0000:07:00.0: eth0: link up [ 1159.161283] r8169 0000:07:00.0: eth0: link up [ 1406.623550] r8169 0000:07:00.0: eth0: link up Edit @roland-taylor: Network is always available under Windows. Pings do not timeout, applications do not complain of no network availability, large downloads are not interrupted or slowed.

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• How can I disable usb-autosuspend for a specific device?

  - by black_puppydog

  This is related to the issue discussed in this question. Summary: the mouse freezes when operating on battery since it is autosuspended after a certain time and needs more time to wake up. Disabling usb-autosuspend for the mouse's receiver in powertop is a temporary solution but does not survive a reboot. How can I permanently disable the usb autosuspend for only one specific device? A solution that does not involve installing additional packages is preferred (after all, I want to disable something) but not required. Removing powertop (which seems to be a solution for some) is not what I want - I like poertop... And installing laptop-mode-tools to disable usb_autosuspend alltogether is not what I want, either, thus the new question. Also: will this affect the battery of my notebook? The logitech unifying receiver for the mouse stays connected all the time, so if that prevents the autosuspend from happening for all devices that would probably be bad.

  Read the article

• How do you install a USB CD Rom drive in Ubuntu 10.04?

  - by Matt Allen

  Hello, I recently purchased a USB CD ROM drive, but I don't know how to get it to work with my computer which runs Ubuntu 10.04. http://www.amazon.com/gp/product/B00303H908/ref=oss_product When I issue the lsusb command, it shows up as: Bus 002 Device 016: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter The computer doesn't recognize it automatically. How can I get this drive to show up as an actual drive on my computer? If this particular drive can't handle Linux, can you recommended one which can and provide a link to it so I can purchase it? Thanks!

  Read the article

• Can I install ubuntu on usb hdd without loosing data on it?

  - by Radek

  I have live-usb stick that I can boot latest live Ubuntu from. Then I have 160GB external WD hdd with few GB free of space. My notebook can't have any internal hdd so I was wondering if I can use my external one to install and boot Ubuntu and install new programs, save settings etc. without loosing (or moving around) any data on this external hdd. The best would be if I can somehow use the live-usb. I'm traveling so any "complicated" solution might be bit hard to implement. I do have an access to the Internet.

  Read the article

• Looking for a host based network monitor solution

  - by Ole Martin Handeland

  Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

  Read the article

• If Ubuntu freezes when running off a USB drive, will it freeze after full installation?

  - by fearoffours

  I'm planning to install Ubuntu on an aging Compaq Presario V5000. I've established that the Unity desktop is not suited to this laptop, and am now using the standard (Gnome?) desktop. I'm grappling with ndiswrapper and my wireless chipset. But I'm still running it off a USB drive before I take the plunge and install properly to my internal HD. Part of my reticence in completing the installation is I'm experience freezes after about 10-20 minutes usage. Is this likely to be in any way related to running it off the USB drive?

  Read the article

• Is it possible to power up ports on a USB hub from Ubuntu?

  - by James Henstridge

  I have a D-Link DUB-H7 powered USB 2.0 hub connected to my computer. Occasionally when I reboot the system, I've noticed that some of the ports on the hub get powered down: the green light next to the port is turned off, and the device attached to that port is not visible to lsusb or similar commands. Devices attached to the other ports on the hub function as normal. I am able to restore the ports by disconnecting power to the hub temporarily (from the computer, AC adapter and any devices that might provide any power such as my phone), but this is a bit of a hassle. It seems like something that might be related to power management, so is there some way you can tell the USB hub to power up through software?

  Read the article

• How can I get a DisplayLink USB monitor under Ubuntu (any recent version) ?

  - by jfmessier

  I have a DisplayLink-based external USB monitor, which has both power and data over USB, and seems to work perfectly under Windows 7, but only can display a text console under Ubuntu 10.10, and that I can only use when I am actually switched to it. So the only Use I can have so far is to have some text-based monitoring or console that I can watch while working on the graphic display. I know there are some development done for DisplayLink, but I never could get it to actually run properly. Yes, I tried the detailed setup described in other posts, but they did not work, and instead crashed my X that I had to restore. Merci :-)

  Read the article

• How can I get a USB floppy drive to work?

  - by jfmessier

  I have a Toshiba USB floppy drive that I need to use under Ubuntu. When I connect it, and insert a floppy disk in it, I do not see anything mounted under Ubuntu 10.10. I was suspecting the hardware and/or the floppy disk to be defective, and so I tested the floppy disk as well as the floppy drive itself under Windows XP, and everything was just fine. I was able to find the following instructions: Add the following line to the /etc/modules file: floppy Enter the following shell commands: mkdir /media/floppy mount -t vfat /dev/sdc /media/floppy -o uid=1000 This will mount the floppy, but I would like this to happen automatically, so when I connect the drive to the USB port, it automatically mounts the floppy. How can I make this work? Or does Ubuntu only work with internal Floppy drives?

  Read the article

• How do I configure wvdial to connect using a micromax 353g usb modem?

  - by user72209

  I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

  Read the article

• How do I safely use a virus infected USB drive in Ubuntu?

  - by suhridk

  I have an USB drive which I know is virus infected (an anti-virus on my friend's machine detected it). Unfortunately neither of us know the virus name and I don't want to take the risk of plugging it to my Windows box again. Of course, in all probability the virus affects only Windows. (But I'm not sure) I want to know if I can safely plug the USB into my Ubuntu Lucid laptop and copy the stuff I need from the drive. If there are some precautions I need to follow what would they be?

  Read the article

• Will the netinstall (minimal) work with a USB cellular modem?

  - by Z9iT

  Installing Ubuntu minimal is extremely easy when the system has a LAN card and connected to internet via Cable & Router... I Recently came across a situation where I needed to install Ubuntu Minimal on a system which wash not having a LAN card and cable internet anywhere around... The only access to the internet was through a USB Plug n Play Data-Card Modem. May anyone suggest something so that I may install Ubuntu Minimal using USB Modem as the only source of Internet, if it's possible at all?? (This relates to Ubuntu 12.04 in specific)

  Read the article

• Do most front and rear USB connections deliver the same power and performance?

  - by Bratch

  I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

  Read the article

• Photoshop CS5 performance over network drive (cifs)

  - by grub

  Hello Everyone I did install a QNAP NAS TS410 for a customer (professional photographer) with 3 Hitachi Deskstar 7200rpm 2TB disk configured as RAID5. The NAS and the workstations are connected over a Gigabit network. He and his co-worker are accessing the photos (about 1TB of photos) over a mapped network drive from their windows machines (Windows XP - 32bit and Windows 7 Ultimate - 32bit). Both are using Photoshop CS5 to edit the photos. The problem is that to save a edited photo takes a really long time, it takes about 3 times as long to save a photo as to open it. After some tests I can exclude the network, the NAS and the windows machines as source of the issue. I think the problem is the Photoshop software and its handling of the network drives. Officially network drives are not supported by Adobe. I do not have any experience with the Adobe products, especially with Adobe Photoshop CS5. What are your recommendation to solve the performance issue? Should my customer copy the photos to the local drive, edit them and upload them again to the network drive or is Adobe Drive or Adobe Version Cue the answer? One requirement is that the photos need to be accessible / editable from both computers even when one of them is offline. Adobe Version Cue needs a dedicated service running to be usable, so this solution is not possible as far as I understand the Cue software. Thank you for your input to this issue and have a nice day :-) Greetings grub

  Read the article

• I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

  - by Christopher Galpin

  I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

  Read the article

• Setting up /etc/network/interface file for KVM ubuntu 10.10

  - by Charles Thornton

  I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

  Read the article

• How do I install Ubuntu to a USB key?

  - by badp

  If you are hurrying to reply, System ? Administration ? StartUp Disk Creator -- no, that's not what I'm talking about. I want to try Ubuntu 11.04's Unity without touching my existing Ubuntu install. To do this, I need to install the nVidia drivers first (sigh). To do this, I need changes to persist a reboot. To do this, I need to really install Ubuntu on a USB key. How do you do that? What I tried I tried to make a USB key from Testdrive, then boot from it, then choose "Install Ubuntu." The installer refused to install to the installation media itself. I tried, from my installed copy of Ubuntu: sudo kvm /dev/sdb --cdrom .cache/testdrive/iso/ubuntu_natty-desktop-i386.iso ...but the installer didn't detect the disk properly.

  Read the article

• Best usb storage for my router, Asus RT-AC66U?

  - by Jason94

  I have the ASUS RT-AC66U and I want to add a USB storage to it. It has 2x USB, and Im already using one for my printer. So the last one I want to use to attach a USB storage, and I've read some reviews stating the throughput of the USB could be up to 18 mb/s. So in regard of USB storage, should I care about hard disk cache? Simple powered-over-usb seems to have 8 mb cache, other (externally powered) has 16 for instance.

  Read the article

• USB disk not recognized after detaching from DVD player. What to do?

  - by MMA

  I had one Transcend 4GB USB stick formatted to NTFS and was working fine. Today I inserted this disk into a DVD player, and it was saying, "loading". After a long time, noting happened, and it seemed that the stick (NTFS) is not recognized by it. I took out the stick and tried to reformat to FAT32. But the stick is not being recognized in my machine (Ubuntu 12.04). I tried the advices from USB drive not recognized after Erase Disk, without any success. When I tried Disk Utility, the stick is indicated as a generic device. See image, Formatting this device fails, saying, No medium found. Again see image, gparted does not even list this device. The same thing happens for fdisk. It is not listed there. Have I totally lost this stick? What should I do?

  Read the article

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• What can i do if i made a bootable usb stick, but it doesn't work properly?

  - by eff

  Currently i have ubuntu 11.10 as an os and i want ubuntu 12.04 lts. I made a bootable usb stick with the program 'startup disk creator'. Everything went well (i choose the language, and then i choose ' install'), the purple screen with the title 'ubuntu' come up, it started loading too. After a time black screen come up with white letters last sentence was something like: panic occured, switching back to text. I tried it several times, the same thing happens. i tried to click on ' trying ubuntu from usb too, but it didn't work either . Please help me!

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >