Search Results

Search found 12338 results on 494 pages for 'compilation tool'.

Page 470/494 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• Given a trace of packets, how would you group them into flows?

  - by zxcvbnm

  I've tried it these ways so far: 1) Make a hash with the source IP/port and destination IP/port as keys. Each position in the hash is a list of packets. The hash is then saved in a file, with each flow separated by some special characters/line. Problem: Not enough memory for large traces. 2) Make a hash with the same key as above, but only keep in memory the file handles. Each packet is then put into the hash[key] that points to the right file. Problems: Too many flows/files (~200k) and it might run out of memory as well. 3) Hash the source IP/port and destination IP/port, then put the info inside a file. The difference between 2 and 3 is that here the files are opened and closed for each operation, so I don't have to worry about running out of memory because I opened too many at the same time. Problems: WAY too slow, same number of files as 2 so also impractical. 4) Make a hash of the source IP/port pairs and then iterate over the whole trace for each flow. Take the packets that are part of that flow and place them into the output file. Problem: Suppose I have a 60 MB trace that has 200k flows. This way, I would process, say, a 60 MB file 200k times. Maybe removing the packets as I iterate would make it not so painful, but so far I'm not sure this would be a good solution. 5) Split them by IP source/destination and then create a single file for each one, separating the flows by special characters. Still too many files (+50k). Right now I'm using Ruby to do it, which might've been a bad idea, I guess. Currently I've filtered the traces with tshark so that they only have relevant info, so I can't really make them any smaller. I thought about loading everything in memory as described in 1) using C#/Java/C++, but I was wondering if there wouldn't be a better approach here, especially since I might also run out of memory later on even with a more efficient language if I have to use larger traces. In summary, the problem I'm facing is that I either have too many files or that I run out of memory. I've also tried searching for some tool to filter the info, but I don't think there is one. The ones I've found only return some statistics and wouldn't scan for every flow as I need.

  Read the article

• javascript problem on ASPx Page Control

  - by mahfuz

  my ASPx Page Control have four itmes. Each tab item are individual usercontrol and they have javascript method.*But always tab item1 index=0 works well*,rest of item javascript don't work.But individually they work well ,problem arise when i put them in ASPx Page Control.*when i click rest of tab items javascript function Tab item1 index=0 ascx* page always load . server side event C# code works well for all tab items.....How to solve this problem .....What's the problem is? i use devespress tool ..... <table> <tr> <td> <dxtc:ASPxPageControl Width="500px" ID="ASPxPageControl1" runat="server" ActiveTabIndex="0" EnableCallbackCompression="True" EnableHierarchyRecreation="True" AutoPostBack="True"> <TabPages> <dxtc:TabPage Text="Charge Company"> <ContentCollection> <dxw:ContentControl ID="ContentControl1" runat="server"> <uc1:UCConfig_Charge_Company_Wise ID="UCConfig_Charge_Company_Wise" runat="server" /> </dxw:ContentControl> </ContentCollection> </dxtc:TabPage> <dxtc:TabPage Text="Charge Depository Company"> <ContentCollection> <dxw:ContentControl ID="ContentControl3" runat="server"> <uc2:UCConfig_Charge_Depository_Company_Wise ID="UCConfig_Charge_Depository_Company_Wise" runat="server" /> </dxw:ContentControl> </ContentCollection> </dxtc:TabPage> <dxtc:TabPage Text="Investor Charge "> <ContentCollection> <dxw:ContentControl ID="ContentControl5" runat="server"> <uc4:UCConfig_Investor_Account_Wise_Charge ID="UCConfig_Investor_Account_Wise_Charge" runat="server" /> </dxw:ContentControl> </ContentCollection> </dxtc:TabPage> <dxtc:TabPage Text="Charge Operation Mode "> <ContentCollection> <dxw:ContentControl ID="ContentControl4" runat="server"> <uc3:UCconfig_charge_operation_mode ID="UCconfig_charge_operation_mode" runat="server" /> </dxw:ContentControl> </ContentCollection> </dxtc:TabPage> </TabPages> </dxtc:ASPxPageControl> </td> </tr> </table> my first ASPx Page Control item works well.but rest of them create problem.i need to call javascript all of them but calling javascript from others create problem ,they show me bellow error Microsoft JScript runtime error: 'this.GetStateInput().value' is null or not an object

  Read the article

• deleted gen folder, eclipse isn't generating it now :(

  - by LuxuryMode

  I accidentally deleted my gen folder and now, predictably, my resources are all messed up. I just created a gen folder myself and tried to project clean - that didn't work. Tried right-clicking project and going to android tools fix project properties - didn't work. Tried unchecking build automatically...didn't work. cleaned, closed project, closed eclipse, restarted, etc, etc. Nothing is working and I keep seeing this error: gen already exists but is not a source folder. Convert to a source folder or rename it. EDIT - OK was able to generate R.java, but now I'm getting crazy stuff in the console: [2011-06-14 17:06:11 - fastapp] Conversion to Dalvik format failed with error 1 [2011-06-14 17:06:42 - fastapp] Dx trouble processing "java/awt/font/NumericShaper.class": Ill-advised or mistaken usage of a core class (java.* or javax.*) when not building a core library. This is often due to inadvertently including a core library file in your application's project, when using an IDE (such as Eclipse). If you are sure you're not intentionally defining a core class, then this is the most likely explanation of what's going on. However, you might actually be trying to define a class in a core namespace, the source of which you may have taken, for example, from a non-Android virtual machine project. This will most assuredly not work. At a minimum, it jeopardizes the compatibility of your app with future versions of the platform. It is also often of questionable legality. If you really intend to build a core library -- which is only appropriate as part of creating a full virtual machine distribution, as opposed to compiling an application -- then use the "--core-library" option to suppress this error message. If you go ahead and use "--core-library" but are in fact building an application, then be forewarned that your application will still fail to build or run, at some point. Please be prepared for angry customers who find, for example, that your application ceases to function once they upgrade their operating system. You will be to blame for this problem. If you are legitimately using some code that happens to be in a core package, then the easiest safe alternative you have is to repackage that code. That is, move the classes in question into your own package namespace. This means that they will never be in conflict with core system classes. JarJar is a tool that may help you in this endeavor. If you find that you cannot do this, then that is an indication that the path you are on will ultimately lead to pain, suffering, grief, and lamentation. [2011-06-14 17:06:42 - fastapp] Dx 1 error; aborting [2011-06-14 17:06:42 - fastapp] Conversion to Dalvik format failed with error 1 And eclipse can't resolve the import of my resources import com.me.fastapp.R;

  Read the article

• MySQL foreign key creation with alter table command

  - by user313338

  I created some tables using MySQL Workbench, and then did forward ‘forward engineer’ to create scripts to create these tables. BUT, the scripts lead me to a number of problems. One of which involves the foreign keys. So I tried creating separate foreign key additions using alter table and I am still getting problems. The code is below (the set statements, drop/create statements I left in … though I don’t think they should matter for this): SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0; SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0; SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='TRADITIONAL'; DROP SCHEMA IF EXISTS `mydb` ; CREATE SCHEMA IF NOT EXISTS `mydb` DEFAULT CHARACTER SET latin1 COLLATE latin1_swedish_ci ; -- ----------------------------------------------------- -- Table `mydb`.`User` -- ----------------------------------------------------- DROP TABLE IF EXISTS `mydb`.`User` ; CREATE TABLE IF NOT EXISTS `mydb`.`User` ( `UserName` VARCHAR(35) NOT NULL , `Num_Accts` INT NOT NULL , `Password` VARCHAR(45) NULL , `Email` VARCHAR(45) NULL , `User_ID` INT NOT NULL AUTO_INCREMENT , PRIMARY KEY (`User_ID`) ) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `mydb`.`User_Space` -- ----------------------------------------------------- DROP TABLE IF EXISTS `mydb`.`User_Space` ; CREATE TABLE IF NOT EXISTS `mydb`.`User_Space` ( `User_UserName` VARCHAR(35) NOT NULL , `User_Space_ID` INT NOT NULL AUTO_INCREMENT , PRIMARY KEY (`User_Space_ID`), FOREIGN KEY (`User_UserName`) REFERENCES `mydb`.`User` (`UserName`) ON UPDATE CASCADE ON DELETE CASCADE) ENGINE = InnoDB; SET SQL_MODE=@OLD_SQL_MODE; SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS; SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS; The error this produces is: Error Code: 1005 Can't create table 'mydb.user_space' (errno: 150) Anybody know what the heck I’m doing wrong?? And anybody else have problems with the script generation done by mysql workbench? It’s a nice tool, but annoying that it pumps out scripts that don’t work for me. [As an fyi here’s the script it auto-generates: SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0; SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0; SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='TRADITIONAL'; DROP SCHEMA IF EXISTS `mydb` ; CREATE SCHEMA IF NOT EXISTS `mydb` DEFAULT CHARACTER SET latin1 COLLATE latin1_swedish_ci ; -- ----------------------------------------------------- -- Table `mydb`.`User` -- ----------------------------------------------------- DROP TABLE IF EXISTS `mydb`.`User` ; CREATE TABLE IF NOT EXISTS `mydb`.`User` ( `UserName` VARCHAR(35) NOT NULL , `Num_Accts` INT NOT NULL , `Password` VARCHAR(45) NULL , `Email` VARCHAR(45) NULL , `User_ID` INT NOT NULL AUTO_INCREMENT , PRIMARY KEY (`User_ID`) ) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `mydb`.`User_Space` -- ----------------------------------------------------- DROP TABLE IF EXISTS `mydb`.`User_Space` ; CREATE TABLE IF NOT EXISTS `mydb`.`User_Space` ( `User_Space_ID` INT NOT NULL AUTO_INCREMENT , PRIMARY KEY (`User_Space_ID`) , INDEX `User_ID` () , CONSTRAINT `User_ID` FOREIGN KEY () REFERENCES `mydb`.`User` () ON DELETE NO ACTION ON UPDATE NO ACTION) ENGINE = InnoDB; SET SQL_MODE=@OLD_SQL_MODE; SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS; SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS; ** Thanks!]

  Read the article

• Unexpected output from Bubblesort program with MSVC vs TCC

  - by Sujith S Pillai

  One of my friends sent this code to me, saying it doesn't work as expected: #include<stdio.h> void main() { int a [10] ={23, 100, 20, 30, 25, 45, 40, 55, 43, 42}; int sizeOfInput = sizeof(a)/sizeof(int); int b, outer, inner, c; printf("Size is : %d \n", sizeOfInput); printf("Values before bubble sort are : \n"); for ( b = 0; b &lt; sizeOfInput; b++) printf("%d\n", a[b]); printf("End of values before bubble sort... \n"); for ( outer = sizeOfInput; outer &gt; 0; outer-- ) { for ( inner = 0 ; inner &lt; outer ; inner++) { printf ( "Comparing positions: %d and %d\n",inner,inner+1); if ( a[inner] &gt; a[inner + 1] ) { int tmp = a[inner]; a[inner] = a [inner+1]; a[inner+1] = tmp; } } printf ( "Bubble sort total array size after inner loop is %d :\n",sizeOfInput); printf ( "Bubble sort sizeOfInput after inner loop is %d :\n",sizeOfInput); } printf ( "Bubble sort total array size at the end is %d :\n",sizeOfInput); for ( c = 0 ; c &lt; sizeOfInput; c++) printf("Element: %d\n", a[c]); } I am using Micosoft Visual Studio Command Line Tool for compiling this on a Windows XP machine. cl /EHsc bubblesort01.c My friend gets the correct output on a dinosaur machine (code is compiled using TCC there). My output is unexpected. The array mysteriously grows in size, in between. If you change the code so that the variable sizeOfInput is changed to sizeOfInputt, it gives the expected results! A search done at Microsoft Visual C++ Developer Center doesn't give any results for "sizeOfInput". I am not a C/C++ expert, and am curious to find out why this happens - any C/C++ experts who can "shed some light" on this? Unrelated note: I seriously thought of rewriting the whole code to use quicksort or merge sort before posting it here. But, after all, it is not Stooge sort... Edit: I know the code is not correct (it reads beyond the last element), but I am curious why the variable name makes a difference.

  Read the article

• Make a compiled binary run at native speed flawlessly without recompiling from source on a another system?

  - by unknownthreat

  I know that many people, at a first glance of the question, may immediately yell out "Java", but no, I know Java's qualities. Allow me to elaborate my question first. Normally, when we want our program to run at a native speed on a system, whether it be Windows, Mac OS X, or Linux, we need to compile from source codes. If you want to run a program of another system in your system, you need to use a virtual machine or an emulator. While these tools allow you to use the program you need on the non-native OS, they sometimes have problems of performance and glitches. We also have a newer compiler called "JIT Compiler", where the compiler will parse the bytecode program to native machine language before execution. The performance may increase to a very good extent with JIT Compiler, but the performance is still not the same as running it on a native system. Another program on Linux, WINE, is also a good tool for running Windows program on Linux system. I have tried running Team Fortress 2 on it, and tried experiment with some settings. I got ~40 fps on Windows at its mid-high setting on 1280 x 1024. On Linux, I need to turn everything low at 1280 x 1024 to get ~40 fps. There are 2 notable things though: Polygon model settings do not seem to affect framerate whether I set it low or high. When there are post-processing effects or some special effects that require manipulation of drawn pixels of the current frame, the framerate will drop to 10-20 fps. From this point, I can see that normal polygon rendering is just fine, but when it comes to newer rendering methods that requires graphic card to the job, it slows down to a crawl. Anyway, this question is rather theoretical. Is there anything we can do at all? I see that WINE can run STEAM and Team Fortress 2. Although there are flaws, they can run at lower setting. Or perhaps, I should also ask, "is it possible to translate one whole program on a system to another system without recompiling from source and get native speed?" I see that we also have AOT Compiler, is it possible to use it for something like this? Or there are so many constraints (such as DirectX call or differences in software architecture) that make it impossible to have a flawless and not native to the system program that runs at native speed?

  Read the article

• How to enable UAC prompt through programming

  - by peter

  I want to implement a UAC prompt for an application in visualc++ the operating system is 32bit x7460(2processor) Windowsserver 2008 the exe is myproject.exe through manifest.. Here for testing i wl build the application in Windows XP OS and copy the exe in to system containg the Windowsserver 2008 machine and replace it So what i did is i added a manifest like this name of that is myproject.exe.manifest My project has 3 folders like Headerfile,Resourcefile and Source file.I added this manifest(myproject.exe.manifest) in the Sourcefile folder containing other cpp and c code <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="11.1.4.0" processorArchitecture="X7460" name="myproject" type="win32"/> <description>myproject Problem</description> <!-- Identify the application security requirements. --> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="requireAdministrator" uiAccess="false"/> </requestedPrivileges> </security> </trustInfo> </assembly> then i added this line of code in Resourcefile(.rc).Means one header file is there(Myproject.h).I added the line of code there #define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" Finally i did the following step 1. Open your project in Microsoft Visual Studio 2005. 2. Under Project, select Properties. 3. In Properties, select Manifest Tool, and then select Input and Output. 4. Add in the name of your application manifest file under Additional manifest files. 5. Rebuild your application. But i am getting lot of Syntax errors Is there any problems in the way which i followed.If i commented the line define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" which added in Myproject.h for adding values in .rc file there willnot any error other than this general error c1010070: Failed to load and parse the manifest. The system cannot find the file specified. .\myproject.exe.manifest How to enable UAC prompt through programming

  Read the article

• Trying to style the first tbody different than others without introducing another class.

  - by mwiik

  I have a table with multiple tbody's, each of which has a classed row, and I want it so that the classed row in the first tbody has style differences, but am unable to get tbody:first-child to work in any browser. Perhaps I am missing something, or maybe there is a workaround. Ideally, I would like to provide the programmers with a single tbody section they can use as a template, but will otherwise have to add a class to the first tbody, making for an extra test in the programming. The html is straightforward: <tbody class="subGroup"> <tr class="subGroupHeader"> <th colspan="8">All Grades: Special Education</th> <td class="grid" colspan="2"><!-- contains AMO line --></td> <td><!-- right 100 --></td> </tr> <tr>...</tr> <!-- several more rows of data --> </tbody> There are several tbody's per table. I want to style the th and td's within tr.subGroupHeader in the very first tbody differently than the rest. Just to illustrate, I want to add a border-top to the tr.subGroupHeader cells. The tr.subGroupHeader will be styled with a border-top, such as: table.databargraph.continued tr.subGroupHeader th, table.databargraph.continued tr.subGroupHeader td { border-top: 6px solid red; } For the first tbody, I am trying: table.databargraph.continued tbody:first-child tr.subGroupHeader th { border-top: 6px solid blue ; } However, this doesn't seem to work in any browser (I've tested in Safari, Opera, Firefox, and PrinceXML, all on my Mac) Curiously, the usually excellent Xyle Scope tool indicates that the blue border should be taking precedence, though it obviously is not. See the screenshot at http://s3.amazonaws.com/ember/kUD8DHrz06xowTBK3qpB2biPJrLWTZCP_o.png This screenshot shows (top left) the American Indian th is selected, and (bottom right), shows (via black instead of gray text for the css declaration), that, indeed, the blue border should be given precedence. Yet the border is red. I may be missing something fundamental, like pseudo-classes not working for tbodys at all... This really only needs to work in PrinceXML, and maybe Safari so I can see what I'm doing with webkit-based css tools. Note I did try a selector like tr.subGroupHeader:first-child, but such tr's apparently consider the tbody the parent (as I would suspect), thus made every border blue. Thanks...

  Read the article

• Windows 7 - pydoc from cmd

  - by Random_Person

  Okay, I'm having one of those moments that makes me question my ability to use a computer. This is not the sort of question I imagined asking as my first SO post, but here goes. Started on Zed's new "Learn Python the Hard Way" since I've been looking to get back into programming after a 10 year hiatus and python was always what I wanted. This book has really spoken to me. That being said, I'm having a serious issue with pydoc from the command. I've got all the directories in c:/python26 in my system path and I can execute pydoc from the command line just fine regardless of pwd - but it accepts no arguments. Doesn't matter what I type, I just get the standard pydoc output telling me the acceptable arguments. Any ideas? For what it's worth, I installed ActivePython as per Zed's suggestion. C:\Users\Chevee>pydoc file pydoc - the Python documentation tool pydoc.py <name> ... Show text documentation on something. <name> may be the name of a Python keyword, topic, function, module, or package, or a dotted reference to a class or function within a module or module in a package. If <name> contains a '\', it is used as the path to a Python source file to document. If name is 'keywords', 'topics', or 'modules', a listing of these things is displayed. pydoc.py -k <keyword> Search for a keyword in the synopsis lines of all available modules. pydoc.py -p <port> Start an HTTP server on the given port on the local machine. pydoc.py -g Pop up a graphical interface for finding and serving documentation. pydoc.py -w <name> ... Write out the HTML documentation for a module to a file in the current directory. If <name> contains a '\', it is treated as a filename; if it names a directory, documentation is written for all the contents. C:\Users\Chevee> EDIT: New information, pydoc works just fine in PowerShell. As a linux user, I have no idea why I'm trying to use cmd anyways--but I'd still love to figure out what's up with pydoc and cmd. EDIT 2: More new information. In cmd... c:\>python c:/python26/lib/pydoc.py file ...works just fine. Everything works just fine with just pydoc in PowerShell without me worrying about pwd, or extensions or paths.

  Read the article

• Help with strange memory behavior. Looking for leaks both in my brain and in my code.

  - by BastiBechtold

  I spent the last few days trying to find memory leaks in a program we are developing. First of all, I tried using some leak detectors. After fixing a few issues, they do not find any leaks any more. However, I am also monitoring my application using perfmon.exe. Performance Monitor reports that 'Private Bytes' and 'Working Set - Private' are steadily rising when the app is used. To me, this suggests that the program is using more and more memory the longer it runs. Internal resources seem to be stable however, so this sounds like leaking to me. The program is loading a DLL at runtime. I suspect that these leaks or whatever they are occur in that library and get purged when the library is unloaded, hence they won't get picked up by the leak detectors. I used both DevPartner BoundsChecker and Virtual Leak Detector to look for memory leaks. Both supposedly catch leaks in DLLs. Also, the memory consumption is increasing in steps and those steps roughly, but not exactly, coincide with certain GUI actions I perform in the application. If these were errors in our code, they should get triggered every single time the actions are performed and not just most of the time. Whenever I am confronted with so much strangeness, I begin to question my basic assumptions. So I turn to you, who know everything, for suggestions. Is there a flaw in my assumptions? Do you have an idea of how to go about troubleshooting a problem like this? Edit: I am currently using Microsoft Visual C++ (x86) on Windows 7 64. Edit2: I just used IBM Purify to hunt for leaks. First of all, it lists a full 30% of the program as leaked memory. This can not be true. I guess it is identifying the whole DLL as leaked or something like that. However, if I search for new leaks every few actions, it reports leaks that correspond with the size increase reported by Performance Monitor. This could be a lead to a leak. Sadly, I am only using the trial version of Purify, so it won't show me the actual location of those leaks. (These leaks only show up at runtime. When the program exits, there are no leaks whatsoever reported by any tool.)

  Read the article

• Gradual memory leak in loop over contents of QTMovie

  - by Benji XVI

  I have a simple foundation tool that exports every frame of a movie as a .tiff file. Here is the relevant code: NSString* movieLoc = [NSString stringWithCString:argv[1]]; QTMovie *sourceMovie = [QTMovie movieWithFile:movieLoc error:nil]; int i=0; while (QTTimeCompare([sourceMovie currentTime], [sourceMovie duration]) != NSOrderedSame) { // save image of movie to disk NSAutoreleasePool *arp = [[NSAutoreleasePool alloc] init]; NSString *filePath = [NSString stringWithFormat:@"/somelocation_%d.tiff", i++]; NSData *currentImageData = [[sourceMovie currentFrameImage] TIFFRepresentation]; [currentImageData writeToFile:filePath atomically:NO]; NSLog(@"%@", filePath); [sourceMovie stepForward]; [arp release]; } [pool drain]; return 0; As you can see, in order to prevent very large memory buildups with the various transparently-autoreleased variables in the loop, we create, and flush, an autoreleasepool with every run through the loop. However, over the course of stepping through a movie, the amount of memory used by the program still gradually increases. Instruments is not detecting any memory leaks per se, but the object trace shows certain General Data blocks to be increasing in size. [Edited out reference to slowdown as it doesn't seem to be as much of a problem as I thought.] Edit: let's knock out some parts of the code inside the loop & see what we find out... Test 1 while (banana) { NSAutoreleasePool *arp = [[NSAutoreleasePool alloc] init]; NSString *filePath = [NSString stringWithFormat:@"/somelocation_%d.tiff", i++]; NSLog(@"%@", filePath); [sourceMovie stepForward]; [arp release]; } Here we simply loop over the whole movie, creating the filename and logging it. Memory characteristics: remains at 15MB usage for the duration. Test 2 while (banana) { NSAutoreleasePool *arp = [[NSAutoreleasePool alloc] init]; NSImage *image = [sourceMovie currentFrameImage]; [sourceMovie stepForward]; [arp release]; } Here we add back in the creation of the NSImage from the current frame. Memory characteristics: gradually increasing memory usage. RSIZE is at 60MB by frame 200; 75MB by f300. Test 3 while (banana) { NSAutoreleasePool *arp = [[NSAutoreleasePool alloc] init]; NSImage *image = [sourceMovie currentFrameImage]; NSData *imageData = [image TIFFRepresentation]; [sourceMovie stepForward]; [arp release]; } We've added back in the creation of an NSData object from the NSImage. Memory characteristics: Memory usage is again increasing: 62MB at f200; 75MB at f300. In other words, largely identical. It looks like a memory leak in the underlying system QTMovie uses to do currentFrameImage, to me.

  Read the article

• Problem with Executing Mysql stored procedure

  - by karthik

  The stored procedure builds without any problem. The purpose of this is to take backup of selected tables to a script file. when the SP returns a value {Insert statements}. I am using the below MySql stored procedure, created by SQLWAYS [Tool to convert MsSql to MySql]. The actual MsSql SP is from http://www.codeproject.com/KB/database/InsertGeneratorPack.aspx When i execute the SP in MySql Query Browser, It says "Unknown column 'tbl_users' in 'field list'" What would be the problem ? Because there was no error when i build-ed this Converted MySql SP. Help.. DELIMITER $$ DROP PROCEDURE IF EXISTS `demo`.`InsertGenerator` $$ CREATE DEFINER=`root`@`localhost` PROCEDURE `InsertGenerator`(v_tableName VARCHAR(100)) SWL_return: BEGIN -- SQLWAYS_EVAL# to retrieve column specific information -- SQLWAYS_EVAL# table DECLARE v_string NATIONAL VARCHAR(3000); -- SQLWAYS_EVAL# first half -- SQLWAYS_EVAL# tement DECLARE v_stringData NATIONAL VARCHAR(3000); -- SQLWAYS_EVAL# data -- SQLWAYS_EVAL# statement DECLARE v_dataType NATIONAL VARCHAR(1000); -- SQLWAYS_EVAL# -- SQLWAYS_EVAL# columns DECLARE v_colName NATIONAL VARCHAR(50); DECLARE NO_DATA INT DEFAULT 0; DECLARE cursCol CURSOR FOR SELECT column_name,data_type FROM `columns` WHERE table_name = v_tableName; DECLARE CONTINUE HANDLER FOR SQLEXCEPTION BEGIN SET NO_DATA = -2; END; DECLARE CONTINUE HANDLER FOR NOT FOUND SET NO_DATA = -1; OPEN cursCol; SET v_string = CONCAT('INSERT ',v_tableName,'('); SET v_stringData = ''; SET NO_DATA = 0; FETCH cursCol INTO v_colName,v_dataType; IF NO_DATA <> 0 then -- NOT SUPPORTED print CONCAT('Table ',@tableName, ' not found, processing skipped.') close cursCol; LEAVE SWL_return; end if; WHILE NO_DATA = 0 DO IF v_dataType in('varchar','char','nchar','nvarchar') then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(',v_colName,'SQLWAYS_EVAL# ''+'); ELSE if v_dataType in('text','ntext') then -- SQLWAYS_EVAL# -- SQLWAYS_EVAL# else SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(',v_colName,'SQLWAYS_EVAL# 00)),'''')+'''''',''+'); ELSE IF v_dataType = 'money' then -- SQLWAYS_EVAL# doesn't get converted -- SQLWAYS_EVAL# implicitly SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# y,''''''+ isnull(cast(',v_colName,'SQLWAYS_EVAL# 0)),''0.0000'')+''''''),''+'); ELSE IF v_dataType = 'datetime' then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# time,''''''+ isnull(cast(',v_colName, 'SQLWAYS_EVAL# 0)),''0'')+''''''),''+'); ELSE IF v_dataType = 'image' then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(convert(varbinary,',v_colName, 'SQLWAYS_EVAL# 6)),''0'')+'''''',''+'); ELSE SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(',v_colName,'SQLWAYS_EVAL# 0)),''0'')+'''''',''+'); end if; end if; end if; end if; end if; SET v_string = CONCAT(v_string,v_colName,','); SET NO_DATA = 0; FETCH cursCol INTO v_colName,v_dataType; END WHILE; END $$ DELIMITER ;

  Read the article

• WPF Binding when setting DataTemplate Programically

  - by Daniel

  Hello, I have my little designer tool (my program). On the left side I have TreeView and on the right site I have Accordion. When I select a node I want to dynamically build Accordion Items based on Properties from DataContext of selected node. Selecting nodes works fine, and when I use this sample code for testing it works also. XAML code: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> <layoutToolkit:AccordionItem Header="Controller Info"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </layoutToolkit:AccordionItem> </layoutToolkit:Accordion> C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; //e.NewValue is a class that contains Name property } } } But the problem occurs when I'm trying to achive this using DateTemplate and dynamically build AccordingItem, the Binding is not working: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> </layoutToolkit:Accordion> and DateTemplate in my ResourceDictionary <DataTemplate x:Key="dtSceneNodeContent"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </DataTemplate> and C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { ResourceDictionary rd = new ResourceDictionary(); rd.Source = new Uri("/SilverGL.GUI;component/SilverGLDesignerResourceDictionary.xaml", UriKind.RelativeOrAbsolute); if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; AccordionItem accController = new AccordionItem(); accController.Header = "Controller Info"; accController.ContentTemplate = rd["dtSceneNodeContent"] as DataTemplate; accPanel.Items.Add(accController); } else { // Other type of node } } } I really need help with this issue. Thanks for any support. Daniel

  Read the article

• Smoke testing a .NET web application

  - by pdr

  I cannot believe I'm the first person to go through this thought process, so I'm wondering if anyone can help me out with it. Current situation: developers write a web site, operations deploy it. Once deployed, a developer Smoke Tests it, to make sure the deployment went smoothly. To me this feels wrong, it essentially means it takes two people to deploy an application; in our case those two people are on opposite sides of the planet and timezones come into play, causing havoc. But the fact remains that developers know what the minimum set of tests is and that may change over time (particularly for the web service portion of our app). Operations, with all due respect to them (and they would say this themselves), are button-pushers who need a set of instructions to follow. The manual solution is that we document the test cases and operations follow that document each time they deploy. That sounds painful, plus they may be deploying different versions to different environments (specifically UAT and Production) and may need a different set of instructions for each. On top of this, one of our near-future plans is to have an automated daily deploy environment, so then we'll have to instruct a computer as to how to deploy a given version of our app. I would dearly like to add to that instructions for how to smoke test the app. Now developers are better at documenting instructions for computers than they are for people, so the obvious solution seems to be to use a combination of nUnit (I know these aren't unit tests per se, but it is a built-for-purpose test runner) and either the Watin or Selenium APIs to run through the obvious browser steps and call to the web service and explain to the Operations guys how to run those unit tests. I can do that; I have mostly done it already. But wouldn't it be nice if I could make that process simpler still? At this point, the Operations guys and the computer are going to have to know which set of tests relate to which version of the app and tell the nUnit runner which base URL it should point to (say, www.example.com = v3.2 or test.example.com = v3.3). Wouldn't it be nicer if the test runner itself had a way of giving it a base URL and letting it download say a zip file, unpack it and edit a configuration file automatically before running any test fixtures it found in there? Is there an open source app that would do that? Is there a need for one? Is there a solution using something other than nUnit, maybe Fitnesse? For the record, I'm looking at .NET-based tools first because most of the developers are primarily .NET developers, but we're not married to it. If such a tool exists using other languages to write the tests, we'll happily adapt, as long as there is a test runner that works on Windows.

  Read the article

• mem-leak freeing g_strdup

  - by Mike

  I'm trying to free g_strdup but I'm not sure what I'm doing wrong. Using valgrind --tool=memcheck --leak-check=yes ./a.out I keep getting: ==4506== 40 bytes in 10 blocks are definitely lost in loss record 2 of 9 ==4506== at 0x4024C1C: malloc (vg_replace_malloc.c:195) ==4506== by 0x40782E3: g_malloc (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x4090CA8: g_strdup (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x8048722: add_inv (dup.c:26) ==4506== by 0x80487E6: main (dup.c:47) ==4506== 504 bytes in 1 blocks are possibly lost in loss record 4 of 9 ==4506== at 0x4023E2E: memalign (vg_replace_malloc.c:532) ==4506== by 0x4023E8B: posix_memalign (vg_replace_malloc.c:660) ==4506== by 0x408D61D: ??? (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x408E5AC: g_slice_alloc (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x4061628: g_hash_table_new_full (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x40616C7: g_hash_table_new (in /lib/libglib-2.0.so.0.2200.3) ==4506== by 0x8048795: main (dup.c:42) I've tried different ways to freed but no success so far. I'll appreciate any help. Thanks BTW: It compiles and runs fine. #include <stdio.h> #include <string.h> #include <stdlib.h> #include <glib.h> #include <stdint.h> struct s { char *data; }; static GHashTable *hashtable1; static GHashTable *hashtable2; static void add_inv(GHashTable *table, const char *key) { gpointer old_value, old_key; gint value; if(g_hash_table_lookup_extended(table,key, &old_key, &old_value)){ value = GPOINTER_TO_INT(old_value); value = value + 2; /*g_free (old_key);*/ } else { value = 5; } g_hash_table_replace(table, g_strdup(key), GINT_TO_POINTER(value)); } static void print_hash_kv (gpointer key, gpointer value, gpointer user_data){ gchar *k = (gchar *) key; gchar *h = (gchar *) value; printf("%s: %d \n",k, h); } int main(int argc, char *argv[]){ struct s t; t.data = "bar"; int i,j; hashtable1 = g_hash_table_new(g_str_hash, g_str_equal); hashtable2 = g_hash_table_new(g_str_hash, g_str_equal); for(i=0;i<10;i++){ add_inv(hashtable1, t.data); add_inv(hashtable2, t.data); } /*free(t.data);*/ /*free(t.data);*/ g_hash_table_foreach (hashtable1, print_hash_kv, NULL); g_hash_table_foreach (hashtable2, print_hash_kv, NULL); g_hash_table_destroy(hashtable1); g_hash_table_destroy(hashtable2); return 0; }

  Read the article

• How can I prevent external MSBuild files from being cached (by Visual Studio) during a project build

  - by Damian Powell

  I have a project in my solution which started life as a C# library project. It's got nothing of any interest in it in terms of code, it is merely used as a dependency in the other projects in my solution in order to ensure that it is built first. One of the side-effects of building this project is that a shared AssemblyInfo.cs is created which contains the version number in use by the other projects. I have done this by adding the following to the .csproj file: <ItemGroup> <None Include="Properties\AssemblyInfo.Shared.cs.in" /> <Compile Include="Properties\AssemblyInfo.Shared.cs" /> <None Include="VersionInfo.targets" /> </ItemGroup> <Import Project="$(ProjectDir)VersionInfo.targets" /> <Target Name="BeforeBuild" DependsOnTargets="UpdateSharedAssemblyInfo" /> The referenced file, VersionInfo.targets, contains the following: <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <!-- Some properties defining tool locations and the name of the AssemblyInfo.Shared.cs.in file etc. --> </PropertyGroup> <Target Name="UpdateSharedAssemblyInfo"> <!-- Uses the Exec task to run one of the tools to generate AssemblyInfo.Shared.cs based on the location of AssemblyInfo.Shared.cs.in and some of the other properties. --> </Target> </Project> The contents of the VersionInfo.targets file could simply be embedded within the .csproj file but it is external because I am trying to turn all of this into a project template. I want the users of the template to be able to add the new project to the solution, edit the VersionInfo.targets file, and run the build. The problem is that modifying and saving the VersionInfo.targets file and rebuilding the solution has no effect - the project file uses the values from the .targets file as they were when the project was opened. Even unloading and reloading the project has no effect. In order to get the new values, I need to close Visual Studio and reopen it (or reload the solution). How can I set this up so that the configuration is external to the .csproj file and not cached between builds?

  Read the article

• Is "Systems Designer" the job title that best describes what I do? [closed]

  - by ivo-rossi

  After having worked as Java developer for almost 3 years in the same company that I currently work at, I moved to a new position associated with the development of the same application. I’m in this new position for more than 1 year now. My official job title is Systems Designer, but I’m not sure this is a title that expresses well what I do. So my question here is what would be the most appropriate job title for me? I see this question as important for my career development. After all, I should be able to explain in one word what I do. And it’s no longer “Java Developer”. Well, in more than one word, this is what I do: The business analysts gather requirements / business problems to be solved with the clients and then discuss these requirements with me. Given the requirements, I design the high level solutions to be implemented in our system (e.g. a new screen on the client application, modifications to existing reports, extension to the XML export format of some objects, etc). I base my decision on the current capabilities of the system, the overall impact that the solutions would have on the system and the estimated effort to implement them (as I was a developer of this same application for almost 3 years before I moved to this position, I’m confident in my estimates). The solutions are discussed iteratively with the business analysts until we agree that they are good. The outcome of this analysis is what we call the “requirements design” document, which is written by me, shared with clients for approval and then also with the team that is going to implement the solutions and test them. Note that there are a few problems that I need to find a solution for that are non-functional. If the users are unhappy with the performance of a certain tool, I will investigate what can be done to speed it up. I will do some research – often based in the Java code itself - to identify possibilities of optimizations. But in this new position I no longer code, the main outcome of my work is really the “requirements design”. Is “Systems Designer” really the most appropriate job title?

  Read the article

• Reducer getting fewer records than expected

  - by sathishs

  We have a scenario of generating unique key for every single row in a file. we have a timestamp column but the are multiple rows available for a same timestamp in few scenarios. We decided unique values to be timestamp appended with their respective count as mentioned in the below program. Mapper will just emit the timestamp as key and the entire row as its value, and in reducer the key is generated. Problem is Map outputs about 236 rows, of which only 230 records are fed as an input for reducer which outputs the same 230 records. public class UniqueKeyGenerator extends Configured implements Tool { private static final String SEPERATOR = "\t"; private static final int TIME_INDEX = 10; private static final String COUNT_FORMAT_DIGITS = "%010d"; public static class Map extends Mapper<LongWritable, Text, Text, Text> { @Override protected void map(LongWritable key, Text row, Context context) throws IOException, InterruptedException { String input = row.toString(); String[] vals = input.split(SEPERATOR); if (vals != null && vals.length >= TIME_INDEX) { context.write(new Text(vals[TIME_INDEX - 1]), row); } } } public static class Reduce extends Reducer<Text, Text, NullWritable, Text> { @Override protected void reduce(Text eventTimeKey, Iterable<Text> timeGroupedRows, Context context) throws IOException, InterruptedException { int cnt = 1; final String eventTime = eventTimeKey.toString(); for (Text val : timeGroupedRows) { final String res = SEPERATOR.concat(getDate( Long.valueOf(eventTime)).concat( String.format(COUNT_FORMAT_DIGITS, cnt))); val.append(res.getBytes(), 0, res.length()); cnt++; context.write(NullWritable.get(), val); } } } public static String getDate(long time) { SimpleDateFormat utcSdf = new SimpleDateFormat("yyyyMMddhhmmss"); utcSdf.setTimeZone(TimeZone.getTimeZone("America/Los_Angeles")); return utcSdf.format(new Date(time)); } public int run(String[] args) throws Exception { conf(args); return 0; } public static void main(String[] args) throws Exception { conf(args); } private static void conf(String[] args) throws IOException, InterruptedException, ClassNotFoundException { Configuration conf = new Configuration(); Job job = new Job(conf, "uniquekeygen"); job.setJarByClass(UniqueKeyGenerator.class); job.setOutputKeyClass(Text.class); job.setOutputValueClass(Text.class); job.setMapperClass(Map.class); job.setReducerClass(Reduce.class); job.setInputFormatClass(TextInputFormat.class); job.setOutputFormatClass(TextOutputFormat.class); // job.setNumReduceTasks(400); FileInputFormat.addInputPath(job, new Path(args[0])); FileOutputFormat.setOutputPath(job, new Path(args[1])); job.waitForCompletion(true); } } It is consistent for higher no of lines and the difference is as huge as 208969 records for an input of 20855982 lines. what might be the reason for reduced inputs to reducer?

  Read the article

• Memory Leak with Swing Drag and Drop

  - by tom

  I have a JFrame that accepts top-level drops of files. However after a drop has occurred, references to the frame are held indefinitely inside some Swing internal classes. I believe that disposing of the frame should release all of its resources, so what am I doing wrong? Example import java.awt.datatransfer.DataFlavor; import java.io.File; import java.util.List; import javax.swing.JFrame; import javax.swing.JLabel; import javax.swing.TransferHandler; public class DnDLeakTester extends JFrame { public static void main(String[] args) { new DnDLeakTester(); //Prevent main from returning or the jvm will exit while (true) { try { Thread.sleep(10000); } catch (InterruptedException e) { } } } public DnDLeakTester() { super("I'm leaky"); add(new JLabel("Drop stuff here")); setTransferHandler(new TransferHandler() { @Override public boolean canImport(final TransferSupport support) { return (support.isDrop() && support .isDataFlavorSupported(DataFlavor.javaFileListFlavor)); } @Override public boolean importData(final TransferSupport support) { if (!canImport(support)) { return false; } try { final List<File> files = (List<File>) support.getTransferable().getTransferData(DataFlavor.javaFileListFlavor); for (final File f : files) { System.out.println(f.getName()); } } catch (Exception e) { e.printStackTrace(); } return true; } }); setDefaultCloseOperation(DISPOSE_ON_CLOSE); pack(); setVisible(true); } } To reproduce, run the code and drop some files on the frame. Close the frame so it's disposed of. To verify the leak I take a heap dump using JConsole and analyse it with the Eclipse Memory Analysis tool. It shows that sun.awt.AppContext is holding a reference to the frame through its hashmap. It looks like TransferSupport is at fault. What am I doing wrong? Should I be asking the DnD support code to clean itself up somehow? I'm running JDK 1.6 update 19.

  Read the article

• How can I create the XML::Simple data structure using a Perl XML SAX parser?

  - by DVK

  Summary: I am looking a fast XML parser (most likely a wrapper around some standard SAX parser) which will produce per-record data structure 100% identical to those produced by XML::Simple. Details: We have a large code infrastructure which depends on processing records one-by-one and expects the record to be a data structure in a format produced by XML::Simple since it always used XML::Simple since early Jurassic era. An example simple XML is: <root> <rec><f1>v1</f1><f2>v2</f2></rec> <rec><f1>v1b</f1><f2>v2b</f2></rec> <rec><f1>v1c</f1><f2>v2c</f2></rec> </root> And example rough code is: sub process_record { my ($obj, $record_hash) = @_; # do_stuff } my $records = XML::Simple->XMLin(@args)->{root}; foreach my $record (@$records) { $obj->process_record($record) }; As everyone knows XML::Simple is, well, simple. And more importantly, it is very slow and a memory hog—due to being a DOM parser and needing to build/store 100% of data in memory. So, it's not the best tool for parsing an XML file consisting of large amount of small records record-by-record. However, re-writing the entire code (which consist of large amount of "process_record"-like methods) to work with standard SAX parser seems like an big task not worth the resources, even at the cost of living with XML::Simple. I'm looking for an existing module which will probably be based on a SAX parser (or anything fast with small memory footprint) which can be used to produce $record hashrefs one by one based on the XML pictured above that can be passed to $obj->process_record($record) and be 100% identical to what XML::Simple's hashrefs would have been. I don't care much what the interface of the new module is; e.g whether I need to call next_record() or give it a callback coderef accepting a record.

  Read the article

• .NET: Is there a way to finagle a default namespace in an XPath 1.0 query?

  - by Cheeso

  I'm building a tool that performs xpath 1.0 queries on XHTML documents. The requirement to use a namespace prefix in the query is killing me. The query looks like this: html/body/div[@class='contents']/div[@class='body']/ div[@class='pgdbbyauthor']/h2[a[@name][starts-with(.,'Quick')]]/ following-sibling::ul[1]/li/a (all on one line) ...which is bad enough, except because it's xpath 1.0, I need to use an explicit namespace prefix on each QName, so it looks like this: ns1:html/ns1:body/ns1:div[@class='contents']/ns1:div[@class='body']/ ns1:div[@class='pgdbbyauthor']/ns1:h2[ns1:a[@name][starts-with(.,'Quick')]]/ following-sibling::ns1:ul[1]/ns1:li/ns1:a To set up the query, I do something like this: var xpathDoc = new XPathDocument(new StringReader(theText)); var nav = xpathDoc.CreateNavigator(); var xmlns = new XmlNamespaceManager(nav.NameTable); foreach (string prefix in xmlNamespaces.Keys) xmlns.AddNamespace(prefix, xmlNamespaces[prefix]); XPathNodeIterator selection = nav.Select(xpathExpression, xmlns); But what I want is for the xpathExpression to use the implicit default namespace. Is there a way for me to transform the unadorned xpath expression, after it's been written, to inject a namespace prefix for each element name in the query? I'm thinking, anything between two slashes, I could inject a prefix there. Excepting of course axis names like "parent::" and "preceding-sibling::" . And wildcards. That's what I mean by "finagle a default namespace". Is this hack gonna work? Addendum Here's what I mean. suppose I have an xpath expression, and before passing it to nav.Select(), I transform it. Something like this: string FixupWithDefaultNamespace(string expr) { string s = expr; s = Regex.Replace(s, "^(?!::)([^/:]+)(?=/)", "ns1:$1"); // beginning s = Regex.Replace(s, "/([^/:]+)(?=/)", "/ns1:$1"); // stanza s = Regex.Replace(s, "::([A-Za-z][^/:*]*)(?=/)", "::ns1:$1"); // axis specifier s = Regex.Replace(s, "\\[([A-Za-z][^/:*\\(]*)(?=[\\[\\]])", "[ns1:$1"); // predicate s = Regex.Replace(s, "/([A-Za-z][^/:]*)(?!<::)$", "/ns1:$1"); // end s = Regex.Replace(s, "^([A-Za-z][^/:]*)$", "ns1:$1"); // edge case s = Regex.Replace(s, "([-A-Za-z]+)\\(([^/:\\.,\\)]+)(?=[,\\)])", "$1(ns1:$2"); // xpath functions return s; } This actually works for simple cases I tried. To use the example from above - if the input is the first xpath expression, the output I get is the 2nd one, with all the ns1 prefixes. The real question is, is it hopeless to expect this Regex.Replace approach to work, as the xpath expressions get more complicated?

  Read the article

• help Implementing Object Oriented ansi-C approach??

  - by No Money

  Hey there, I am an Intermediate programmer in Java and know some of the basics in C++. I recently started to scam over "C language" [please note that i emphasized on C language and want to stick with C as i found it to be a perfect tool, so no need for suggestions focusing on why should i move back to C++ or Java]. Moving on, I code an Object Oriented approach in C but kindda scramble with the pointers part. Please understand that I am just a noob trying to extend my knowledge beyond what i learned in High School. Here is my code..... #include <stdio.h> typedef struct per{ int privateint; char *privateString; struct per (*New) (); void (*deleteperOBJ) (struct t_person *); void (*setperNumber) ((struct*) t_person,int); void (*setperString) ((struct*) t_person,char *); void (*dumpperState) ((struct*) t_person); }t_person; void setperNumber(t_person *const per,int num){ if(per==NULL) return; per->privateint=num; } void setperString(t_person *const per,char *string){ if(per==NULL) return; per->privateString=string; } void dumpperState(t_person *const per){ if(per==NULL) return; printf("value of private int==%d\n", per->privateint); printf("value of private string==%s\n", per->privateString); } void deleteperOBJ(struct t_person *const per){ free((void*)t_person->per); t_person ->per = NULL; } main(){ t_person *const per = (struct*) malloc(sizeof(t_person)); per = t_person -> struct per -> New(); per -> setperNumber (t_person *per, 123); per -> setperString(t_person *per, "No money"); dumpperState(t_person *per); deleteperOBJ(t_person *per); } Just to warn you, this program has several errors and since I am a beginner I couldn't help except to post this thread as a question. I am looking forward for assistance. Thanks in advance.

  Read the article

• Live search results as you type... am I going about this the right way? jQuery + PHP

  - by dallen

  This is my first time building a tool like this, so please bare with me. I'm doing this to learn more about jQuery and AJAX. Basically, I have a search input and a hidden div. When you start typing in the search input, the hidden div becomes visible and results are brought in. In this case, I'm searching for client names. It all works fine, however I think my code could be better but I'm not sure exactly where to begin. Each keyup requests a PHP script which accesses a table in a database to find a like string. But in my PHP script, I'm echo'ing some JS/jQuery which I'm not sure is good practice. Below is my code. Am I going about this the right way or am I totally off base? Any suggestions for improvement? Javascript $("#search").keyup(function() { $("#search_results").show("fast"); $.ajax ({ type: "POST", url: "http://localhost:8888/index.php/welcome/search/" + $("#search").val(), success: function(html) { $("#search_results").html(html); } }); }); PHP function search($search_string = false) { if ($search_string) { $this->db->like('name', $search_string); $query = $this->db->get('clients'); if ($query->num_rows() == 0) { echo "No client exists."; } else { foreach ($query->result() as $row) { echo '<script>'; echo ' $("#client_results_'.$row->id.'").hide(); $("#'.$row->id.'").toggle(function() { $.ajax ({ type: "POST", url: "http://localhost:8888/index.php/welcome/search_client_ads/" + '.$row->id.', success: function(html) { $("#client_results_'.$row->id.'").html(html).show("fast"); } }); }, function() { $("#client_results_'.$row->id.'").hide("fast").html(""); });'; echo '</script>'; echo '<p><span id="'.$row->id.'">'.$row->name.'</span></p>'; echo '<div id="client_results_'.$row->id.'"></div>'; } } } else { echo ''; } } function search_client_ads($client_id) { $query = $this->db->get_where('online_ads', array('client' => $client_id)); if ($query->num_rows() == 0) { echo "No ads exist."; } else { foreach ($query->result() as $row) { echo $row->id; } } }

  Read the article

• How to use Mozilla ActiveX Control without registry

  - by Andrew McKinlay

  I've been using the IE Browser component that is part of Windows. But I'm running into problems with security settings. For example, users get security warnings on pages with Javascript. So I'm looking at using the Mozilla ActiveX control instead. It's especially nice because it has a compatible interface. It works well if I let it install the control in the registry. But my users don't always have administrator rights to install things in the registry. So I'm trying to figure out how to use the control without registry changes. I'm using DllGetClassObject to get the class factory (IID_ICLASSFACTORY) and then CoRegisterClassObject to register it. All the API calls appear to succeed. And when I create an AtlAxWin window with the CLSID, it also appears to work. But when I try to call Navigate on the AtlAxGetControl it doesn't work - the interface doesn't have Navigate. I would show the code but it's in an obscure language (Suneido) so it wouldn't mean much. An example in C or C++ would be easy for me to translate. Or an example in another dynamic language like Python or Ruby might be helpful. Obviously I'm doing something wrong. Maybe I'm passing the wrong thing to CoRegisterClassObject? The MSDN documentation isn't very clear on what to pass and I haven't found any good examples. Or if there is another approach, I'm ok with that too. Note: I'm using the AtlAxWin window class so I'm not directly creating the control and can't use this approach. Another option is registry free com with a manifest. But again, I couldn't find a good example, especially since I'm not using Visual Studio. I tried to use the MT manifest tool, but couldn't figure it out. I don't think I can use DLL redirection since that doesn't get around the registry issue AFAIK. Another possibility is using WebKit but it seems even harder to use.

  Read the article

• IOC/Autofac problem

  - by Krazzy

  I am currently using Autofac, but am open to commentary regarding other IOC containers as well. I would prefer a solution using Autofac if possible. I am also somewhat new to IOC so I may be grossly misunderstanding what I should be using an IOC container for. Basically, the situation is as follows: I have a topmost IOC container for my app. I have a tree of child containers/scopes where I would like the same "service" (IWhatever) to resolve differently depending on which level in the tree it is resolved. Furthermore if a service is not registered at some level in the tree I would like the tree to be transversed upward until a suitable implementation is found. Furthermore, when constructing a given component, it is quite possible that I will need access to the parent container/scope. In many cases the component that I'm registering will have a dependency on the same or a different service in a parent scope. Is there any way to express this dependency with Autofac? Something like: builder.Register(c=> { var parentComponent = ?.Resolve<ISomeService>(); var childComponent = new ConcreteService(parentComponent, args...); return childComponent; }).As<ISomeService>(); I can't get anything similar to the above pseudocode to work for serveral reasons: A) It seems that all levels in the scope tree share a common set of registrations. I can't seem to find a way to make a given registration confined a certain "scope". B) I can't seem to find a way to get a hold of the parent scope of a given scope. I CAN resolve ILifetimeScope in the container and then case it to a concrete LifetimeScope instance which provides its parent scope, but I'm guessing it is probably note meant to be used this way. Is this safe? C) I'm not sure how to tell Autofac which container owns the resolved object. For many components I would like component to be "owned" by the scope in which it is constructed. Could tagged contexts help me here? Would I have to tag every level of the tree with a unique tag? This would be difficult because the tree depth is determined at runtime. Sorry for the extremely lengthy question. In summary: 1) Is there any way to do what I want to do using Autofac? 2) Is there another container more suited to this kind of dependency structure? 3) Is IOC the wrong tool for this altogether?

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >