Search Results

Search found 20569 results on 823 pages for 'pc settings'.

Page 470/823 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• why would you create two different subnets on the same physical network?

  - by xirtyllo

  I'm working at a messy location, one of the strange (for me) things is that on the same physical network there are two different subnets. Specifically some computers will have 10.0.0.0/24 and some others will have 172.16.0.0/24. There is only one DHCP server, which gives IPs on the 10.0.0.0/24 range, and there are two internet gateways, one with IP 172.16.0.1 and one with IP 10.0.0.1 . To give an example, I can easily swap one PC from one subnet to the other just by changing its IP and gateway settings. I am trying to imagine why they created the network this way, and which may be the possible advantages and/or drawbacks of having two different subnets on the same physical network. Any thoughts?

  Read the article

• Internal USB A Female to motherboard 4-pin that mounts internally

  - by rockinthesixstring

  I'm wondering if anyone knows of a product like this but that is physically mountable internally rather than on a cable? I'm planning on building a super low profile "gateway" pc that is dedicated to handling internet traffic in my home. I have a great 1U rackmountable chassis for an ITX motherboard, but I need the hard drive real estate for the additional NIC required to run a gateway (one onboard and one PCI). So the plan is to use a small 8GB USB Jump Drive for the OS inside the box (as to not have one hanging out the back. And although it's racked, I still don't want the jump drive flopping around internally, so I want it fixed somehow. I have an alternative idea where by I use a flush mount zap strap saddle and a zip tie to hold it in place, but that seems kind of like a hack.

  Read the article

• Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

  - by Duncan

  Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

  Read the article

• Making a cracked or activated windows uncracked

  - by ugurcode

  I have a pc which has windows 7 license but I installed windows from an image i downloaded and it is already activated. for validating genuine microsoft, i need to entet my own product key but the necessary activation tools do not exist in my windows folder. What do? I googled stuff but because the keywords are too broad I couldn't find a useful tool DAZ doesn't work, activation button doesn't show up. When I enter my original key to Windows Anytime Upgrade, I get this error When I attempt using slmgr, I get this error I used sfc /scannow Now slmgr is existing, I entered slmgr.vbs -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (replacing X es with the cd key) the operation successful. Now I have installed Microsoft Security essentials, which means the problem is solved. Main steps are here open cmd enter Enter "sfc /scannow" enter slmgr.vbs -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX Success

  Read the article

• How to calculate power/energy taken by computer and screen

  - by r0ca

  I need to investigate how much power my linux machine uses per week. I can take a look at the PSU but I would like to know how to calculate the average use of power it takes. I also need to know how much power a CRT screen use per week. Do I need to check the PSU Watt unit and Screen Watt usage and just add both to have the results? P.S. My english is not good, sorry about that! P.P.S. My question is not related to: http://superuser.com/questions/9946/how-to-choose-a-ups-calculate-power-for-a-new-pc

  Read the article

• Work firewall blocking Gmail IMAP port

  - by Sean

  My work has a very over protective firewall. We use Google Apps for our email and so can access the web interface just fine. I use my laptop at work however (MacBook connected via WiFi through my AirPort Express), and prefer to use Sparrow to check my email. The problem is that our firewall blocks whatever port Gmail's IMAP server uses. I'm trying to figure out the easiest way to work around this. I'm guessing I'll need to use an SSH tunnel or VPN, but I'm looking for specific instructions. I'd prefer to only route the IMAP stuff around the firewall as opposed to using a VPN full time. I have two computers at home (one PC, one Mac Mini) that are always on and could probably act as a server if needed.

  Read the article

• Nagios - NagWin - Send notification with gmail

  - by Attila Bujáki

  I would like to send Nagios notifications using my gmail account. I have already set up my hosts I want to monitor and services also. What is the most simple way to accomplish this using NagWin on a Windows Server 2012 installation? As far as I know I must change some of these configuration settings: # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" -server ??? } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" -server ??? } What should I use for smtp server? Is it possible to directly send my notifications to the Gmail server?

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• Simple copy to pen-drive - 0x80070057

  - by yzraeu

  Hello guys, I have this problem for a while and still didn't find the answer. I'm copying a specifc 10mb file to my pen-drive, from any folder on PC to any folder on the pen-drive and all i get is this: 0x80070057 The parameter is incorrect I simply cannot copy the file at all!! The pen-drive in case is my Nokia 5800, in "Mass Storage" mode. Sometimes I cannot copy a single MP3 file, 5 or 7mb. So i have to disconnect and connect again. The source file is not corrupted, the destination works fine with other files. It's just with some files. If I change to another pen-drive, works fine.

  Read the article

• WebDAV mapped drive asking for username and password

  - by confus3d

  Since we migrated domains we're having problems with mapping a drive using a WebDAV connection in our login script. It's a simple net use x: \\server.domain.com\folder Which used to authenticate automatically (all we needed to do to make this happen was to put the server in the intranet zone in the internet explorer settings). Since the domain migration though, nearly everyone is being prompted for a username and password to connect. Does anyone have any idea how to fix this? Any help much appreciated. The webdav share is on a Windows 2003 server running IIS.

  Read the article

• Windows 8 Upgrade : From Windows 7 Trial

  - by Golmaal

  This is a bit complicated it seems. I own Windows Vista Ultimate 64-bit (Retail). It was okay, but around a couple of weeks ago I had some system crash and at that time I decided that I will install Windows 8 as soon as it comes out. However, because of some problems in Vista, at the time of crash, I installed Windows 7 trial. I had some urgent work to do which I accomplished and then I switched the PC off. Now I have purchased Windows 8 Pro Upgrade ($40 version). If I go for a clean install, will it be able to install Windows 8 on not-activated Windows 7? During activation, if it asks for Vista serial number, I can provide it. Or will I first have to install Vista and then only it will allow me to install Windows 8? Also, I used the Upgrade Assistant to download Windows 8 on my laptop (Windows 7 OEM). Will it work on my above mentioned desktop?

  Read the article

• Music but no voice on headphones

  - by TFD

  I have normal stereo headphones which work fine On a specific PC running Windows 7 the external speaker and USB speakers work fine too But when I plug in the headphones, all I hear is muffled music, no voice track? It sounds like it is being split into 5.1, and I am getting just the L & R components, and not the centre voice channel? In the Playback devices (sound) control panel, I can adjust stereo or 5.1 for external speakers or USB speakers, but not for the headphones. The config button is grey out for them Is this the problem, if so how do I fix it?

  Read the article

• Three displays, one video card and no eyefinity mode

  - by José F. Romaniello

  I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

  Read the article

• Changing The Text Selection Shortcuts on a Mac

  - by Berk U.

  I've recently switched over from a PC to a Mac and I'm wondering if there is any way to edit the text selection/deletion shortcuts on a Mac. I write a lot of code and I've found these shortcuts to be very helpful. Here is a quick overview of the deletion shortcuts (http://lifehacker.com/5803041/the-mac-os-x-delete-key-it-goes-both-ways); the selection shortcuts on the mac are similar, except that you can use arrow keys instead of delete. I'd be happy to learn of any method, though I would much prefer it if someone can come up with a way to do it using KeyRemap4MacBook.

  Read the article

• Mac OSX server command equivalent for dhclient?

  - by John Hall

  Is there an MacOS command that makes a dhcp request, and renews the old lease, drops it for a new one, or usefully reports errors or lack of response from a dhcp server? This would both help fix networking on the machine after problems on the network without rebooting and would also be useful to diagnose wider networking problems from a mac. I can not find any command equivalent of dhclient though obviously some component must be serving this purpose. The question is, is that component exposed to a command line interface? I am biased to the command line for these features and may have overlooked settings panels or tools that might solve it using a gui interface. I believe this question is at the heart of this other question: Is there an equivalent command for 'init.d/networking restart' in OS X

  Read the article

• Invalid domains in DNS don't work on mac/*nix like systems

  - by David Mulder

  At work we use domains like abc-01, which work fine on windows. Whilst developing mobile applications we already saw that this doesn't work on both iOS and android which we fixed for a few specific domains (by setting the dns up that abc-01.def.local also works in those) and was assumed to be caused by it being an invalid domain. Now however it's necessary to connect through VPN from a mac and changing all relevant domains is not an option at the moment (far too many of them and would require changing the settings of far too many applications), so I was hoping whether somebody knows a trick or setting to get this to work on mac (or even linux in general).

  Read the article

• Best way to find the computer a user last logged on from?

  - by Garrett

  I am hoping that somewhere in Active Directory the "last logged on from [computer]" is written/stored, or there is a log I can parse out? The purpose of wanting to know the last PC logged on from is for offering remote support over the network - our users move around pretty infrequently, but I'd like to know that whatever I'm consulting was updating that morning (when they logged in, presumably) at minimum. I'm also considering login scripts that write the user and computer names to a known location I can reference, but some of our users don't like to logout for 15 days at a time. If there is an elegant solution that uses login scripts, definitely mention it - but if it happens to work for merely unlocking the station, that would be even better!

  Read the article

• Which is better for running Ubuntu and other Linux OSes, Chromebook or Windows, why? [on hold]

  - by Serge

  I'm learning programming and I would like to switch to a Linux OS, perhaps Ubuntu, to continue this, but the current machine is generally getting pretty old and slow and Windows is the least favorite option for production, and I can manage getting something new right around the price range of the nicest Chromebook on the market right now. However, I have compared specs of HP Chromebook 14 with those of regular PC laptops that roughly cost the same, and the latter consistently have approximately the same and sometimes higher (like the processor speed) specs. Yet usage of Chromebooks for this purpose is pretty widespread nowadays. Is this because they were initially built for a Linux OS - and is it really THAT crucial - or are there other major factors at play here?

  Read the article

• HOSTS File Edit in Windows 7 Not Effective - Pinging URL Still Shows Original IP Address

  - by Sootah

  I've edited my HOSTS file on my Windows 7 Ultimate PC to re-route a couple of URLs so that they point to 127.0.0.1, but after saving the file (and re-opening to verify the changes were written) and pinging them they still reply with the actual IP instead of being redirected to 127.0.0.1 as they should be. At least, that's how it worked in XP, Vista, etc. I even went so far as to restart my DNS service on the machine via services.msc; but no dice. So - I would imagine that Windows 7 keeps the HOSTS file there for legacy purposes and doesn't actually use it anymore. Is there a way to make W7 pay attention to the HOSTS file? In the event that you can't do that, where would I go to edit where these URLs point to? Thanks in advance! -Sootah

  Read the article

• Fedora Installation with software repository in DVD does not work

  - by Raks

  I bought a new assembled PC with processor as Core-i3(2120) and Intel H61 motherboard and was trying to install Fedora 16 from a DVD. This DVD contains all the packages so that installation does not require to download packages from internet. I have used this DVD to install Fedora 16 offline many a times though in machines with different hardware configuration. But in this new machine when the installation reaches the stage wherein it asks for Software repository selection I select CD/DVD but the system fails to read the media and throws up an error that it cannot detect the media. THe LED in the DVD writer also indicate that the DVD is not being read. Now there is neither a problem with the DVD or the DVD drive because the installation started from the DVD itself. So what could the problem be, anything in the BIOS that is causing the problem, Is there any way I could utilize the packages already existing in the CD so that I save downloading the packages from DVD

  Read the article

• Windows 2003 Server R2SP2 throws even ID 2269 after installing Excel WebPart in MOSS3

  - by Phil

  We recently added an Excel workbook webpart (read only excel file - no editing) on our Sharepoint 2007 server. Once we did that, approximately 3-4 times an hour event ID 2269 is shown in the Application Log and a few minutes after that, an event id 1002 is displayed in the system long and the Sharepoint Offfce Servers Application pool shuts down. We've already check the "Bypass traverse checking and DCOM settings) per the MS KB and I have opened a ticket with MS Support. Problem is that MS Suppoert (sharepoint) thinks it is an IIS problem and the IIS people think it is a Sharepoint issue. Anyone else seen this problem? If we remove the Excel webpart, everything goes back to normal. The App Pools, SP and SP Central Admin sites are all using the same domain service account. Thanks in advance, Phil

  Read the article

• How should I remotely manage Dell Poweredge 2850 running Ubuntu server?

  - by Saul

  First I've got to say I'm a Linux / Ubuntu novice, so go gentle on me as I'm on day 3. I've managed to get Ubuntu server Ubuntu 8.04 LTS installed and running on the Poweredge 1850 I bought off ebay. The box will go in a rack at my office but I want to be able to work on it and power on and off from home and I gather that (maybe) IPMI over LAN might be the way to do this, or maybe its something to do with BMC or something? I want to be able to administer/manage from a client PC at home running XP. I will be configuring the office router to port forward port 80 and 443 to the Ubuntu server running Apache2, and I'm puzzled about how the remote management works (unless it comes on a different port forwarded to a different internal IP) Thanks for any help

  Read the article

• How can I use Windows Firewall to only permit the Windows Update service to make an outbound connection?

  - by microsmash

  I'm trying to tailor my Windows Firewall settings (using the Windows Firewall with Advanced Security console) to only permit programs that need to access the Internet with an outbound connection to do so. This works fine for normal applications as I can just allow the program, but services that load in the svchost.exe process are a problem. The only services I actually need to give access to are Windows Update and the Background Intelligent Transfer Service (and even that, I would only like Windows Update to be able to submit jobs to, but that's another issue.) Is there a method to only allow these to be permitted an outbound connection, and not any of the other services loaded in svchost?

  Read the article

• What is the best answer for: "my Internet is not working"?

  - by Maciek Sawicki

  Hi, I look for work in IT Support. One of interview questions is: what would you first say if user call You and tell my Internet is not working? I think about it a lot and still don't know what is correct answerer nor what answer my future employer expects. My choice would be something like: What part of Internet? (but more polite). For example I could ask for opening web page that works on my PC. Please give only serious answers. If You want BOFH or "The website is down" style answers I can create separate question for that.

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >