Search Results

Search found 18845 results on 754 pages for 'wayback machine'.

Page 470/754 | < Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >

• NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

  - by rism

  I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• tcpsndbuf high fail count

  - by Matthew Crenshaw

  I've got a small setup, one machine that acts as a load balancer and two machines that do all the work. The load balancer runs nginx (static content + php proxying to workers) and mysql, the two workers run php5-fpm and memcached (pooled between workers). Here's beancounters for the balancer: tcpsndbuf 2171848 2386280 10000000 20000000 3947733 tcprcvbuf 1248288 1669504 10000000 20000000 0 Here's worker 1: tcpsndbuf 951976 1262672 20000000 40000000 0 tcprcvbuf 278528 393496 20000000 40000000 0 Here's worker 2: tcpsndbuf 989888 527472 20000000 40000000 0 tcprcvbuf 212992 452520 20000000 40000000 0 The balancer has 1GB ram, the two workers have 2GB ram each. What is eating my send buffer?

  Read the article

• Outlook 2007: compose, and reply error with "Not Implemented."

  - by dagit

  This is happening on a Windows Vista machine with Office 2007 Ultimate. I have run repair from the control panel and also the MS Office Diagnostic tool. No problems are reported. When I started Outlook my mail box opens and I can read my messages. If I click compose or reply then Outlook gives me a dialog that says, "Not Implemented." The rest of office seems to be working fine. Does anyone know what causes this or the correct way to repair it? Thanks!

  Read the article

• Ubuntu-installer fails preseed configuration file

  - by user76171

  I try to install Ubuntu 12.04 over network unattended. I installed a DHCP server (Dnsmasq), a TFTP server (tftpd-hpa), I got the netboot.tar.gz archive with the pxelinux.0 file, the pxelinux.cfg directory, the linux kernel and the initrd.gz image and I put a preseed file into my web server. Dnsmasq, tftpd-hpa, pxelinux and Apache are all on the same machine. The PCs MB doesn’t support PXE, so I use iPXE and boot it from a CD. The PC gets an IP from the DHCP, then iPXE loads #pxelinux.cfg/default, which I edited like this: timeout 5 prompt 0 default install label install kernel ubuntu-installer/i386/linux append vga=normal locale=en_GB setup/layoutcode=sl_SI console-setup/layoutcode=sl_SI netcfg/choose_interface=auto initrd=ubuntu-installer/i386/initrd.gz netcfg/get_hostname=ubuntux preseed/url=#http://192.168.10.10/ins/preseed.cfg Then it loads the linux kernel and the initrd.gz image. Then I got a question: Detect keyboard layout? I desided to bother with this later. So I answer No, and then twice on Englishjust to get trough and then I get to the error: The installer failed to process the preconfiguration file from #http://192.168.10.10/ins/preseeed.cfg. The file may be corrupt. I created the file myself and copied the d-I commands into it. I also tried to get the preseed.cfg over a web browser and it works fine. So why is the installer failing?

  Read the article

• FTP client that supports 2 concurrent FTP sessions

  - by oninea

  I'm looking for an FTP client that can connect to two different FTP servers at the same time and allow file transfer or synchronization between those two servers. Basically what I want to achieve is to transfer/synchronize files between 2 different sites from my local machine. Are there any clients around that support this functionality? If there are none, is there an alternative to achieve this? I've taken a look at net2ftp, a web based FTP client, which provides almost the same functionality that I need. What I'm looking for though is a desktop app. Any ideas?

  Read the article

• Architecture- Tracking lead origin when data is submitted by a server

  - by Kevin

  I'm looking for some assistance in determining the least complex strategy for tracking leads on an affiliate's website. The idea is to make the affiliate's integration with my application as easy as possible. I've run into theoretical barriers, so i'm here to explore other options. Application Overview: This is a lead aggregation / distribution platform. We will be focusing on the affiliate portion of this website. Essentially affiliates sign up, enter in marketing campaigns and sell us their conversions. Problem to be solved: We want to track a lead's origin and other events on the affiliate site. We want to know what pages, ads, and forms they viewed before they converted. This can easily be solved with pixel tracking. Very straightforward. Theoretical Issues: I thought I would ask affiliates to place the pixel where I could log impressions and set a third party cookie when the pixel is first called. Then I could associate future impressions with this cookie. The problem is that when the visitor converts on the affiliate's site and I receive their information via HTTP POST from the Affiliate's server I wouldn't be able to access the cookie and associate it with the lead record unless the lead lands on my processor via a redirect and is then redirected back to the affiliate's landing page. I don't want to force the affiliates to submit their forms directly to my tracking site, so allowing them to make an HTTP POST from their server side form processor would be ideal. I've considered writing JavaScript to set a First Party cookie but this seems to make things more complicated for the affiliate. I also considered having the affiliate submit the lead's data via a conversion pixel. This seems to be the most ideal scenario so far as almost all pixels are as easy as copy/paste. The only complication comes from the conversion pixel- which would submit all of the lead information and the request would come from the visitor's machine so I could access my third party cookie.

  Read the article

• IIS 7.5 401 -UnAuthorized Access on a Virtual Directory

  - by Jimmy

  I have setup a website in IIS 7.5 on a Windows 2008 machine. The website is sitting on C:/websites/ Then I added a virtual directory called "/uploads" that points to "d:/websites/uploads". This directory holds all the images/media. When I browse the website in browser, I dont see any images etc. When I browse an image directly I notice that it's throwing a 401 error. 401 - Unauthorized: Access is denied due to invalid credentials. I have searched Google quite a lot and I am pretty sure I am have all the permissions setup correctly. Can anyone tell me what I could be doing wrong here?

  Read the article

• How can I get vim to set an ACL on its swap files?

  - by thsutton

  I use vim on an OS X Snow Leopard Server machine. A number of the directories I work in have ACLs (so that various groups of users can access them over AFP) that are inherited. For some reason, when I'm working in one of these directories, vim cannot read it's own swap files. It can create them fine but can't read them which, for some reason, makes it display the "swap file already exists" message (and no, the swap file does not already exist). vim -r lists the newly created swap file as "[cannot be read]". The owner and group are correct and the permissions are 0600, and the ACLs on the swap file and the file I'm editing are identical (as disclosed by ls -le and compared with diff). groups returns the same thing whether invoked from my login shell or via :! in vim. Has anyone encountered (and hopefully resolved) a problem like this before?

  Read the article

• Which Linux distributive could you advise for a webserver with PIII-700MHz and 512Mb RAM?

  - by Andrei

  Hi everybody, We need to update our webserver (PIII-700MHz and 512Mb RAM) and could not do that without reinstalling the whole system. However my choice to put Ubuntu 9.10 was probably not the best and the machine works very slow now. Actually, we need it just for simple LAPM configuration and we really want to use the old box for this purpose. It used to have old version of Linux Slackware in which I didn't manage to update PHP due to a very complicated non-standard setup. What would you recommend?

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• How to connect to IIS and SQL Server Express on Windows 7 host from XP Mode

  - by SpatialBridge

  Hello, I am running IIS and SQL Server 2008 Express on my Windows 7 host, and I'd like to be able to connect to them in XP Mode. My host machine is not a part of a domain, only a workgroup. So far, I've tried these instructions on connecting to SQL Server, but I'm not able to telnet to port 1433 on the host from XP Mode. I'm also not able to connect using a SQL client. I'm not able to connect to IIS on the host from XP Mode. Advice from those who have had success doing this would be appreciated. Thanks, Jon.

  Read the article

• Make the sound louder in Lubuntu

  - by Andrew

  I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

  Read the article

• BSOD Error When Running Windows Phone Emulator

  - by Akshat Mittal

  I am getting a BSOD Error when Running Windows Phone 7.1 Emulator on Windows 7 Ultimate 64bit, Each time I run the Emulator, it Results in Blue Screen. This is a Fresh Install, This Error also Occurred with my last Windows Install (That is why I formatted the Windows Again), I have already Tried to Re-install it, it also shows "Windows Phone Emulator is Doing a Complete OS boot" (Even at Fresh Install, I know it happens when using Unlocked Emulator Images). I am not able to Test any of my app. Please Help !! EDIT: I am not Running a VM, it is on a Physical Machine.

  Read the article

• Why is this static routing not working ?

  - by geeko

  Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

  Read the article

• Why does python easy install give me "permission denied" errors?

  - by Golden Sinha

  When i try to install program in ubuntu 12.04 it shows the error. program 1 : home@home-Compaq-610:~/Desktop$ python setup.py install running install running build running build_py creating build creating build/lib.linux-i686-2.7 copying Calculator.py - build/lib.linux-i686-2.7 running install_lib copying build/lib.linux-i686-2.7/Calculator.py - /usr/local/lib/python2.7/dist-packages error: /usr/local/lib/python2.7/dist-packages/Calculator.py: Permission denied . program 2 : home@home-Compaq-610:~/Desktop$ sudo chmod +x Moto.bin [sudo] password for home: home@home-Compaq-610:~/Desktop$ it shows like this but it do not install the program. program 3 : home@home-Compaq-610:~/Desktop$ python setup.py install [ERROR] wxPython2.8 is required. how to install wxPython2.8 please tell. if i try to install this program using easy_install it shows like this. home@home-Compaq-610:~/Desktop$ easy_install editra error: can't create or remove files in install directory The following error occurred while trying to add or remove files in the installation directory: [Errno 13] Permission denied: '/usr/local/lib/python2.7/dist-packages/test-easy-install-6778.pth' The installation directory you specified (via --install-dir, --prefix, or the distutils default setting) was: /usr/local/lib/python2.7/dist-packages/ Perhaps your account does not have write access to this directory? If the installation directory is a system-owned directory, you may need to sign in as the administrator or "root" account. If you do not have administrative access to this machine, you may wish to choose a different installation directory, preferably one that is listed in your PYTHONPATH environment variable. For information on other options, you may wish to consult the documentation at: http://packages.python.org/distribute/easy_install.html Please make the appropriate changes for your system and try again. home@home-Compaq-610:~/Desktop$ please help me . please tell how to install programs..

  Read the article

• Robustly disabling specific cron.{hourly,daily,weekly} script

  - by benizi

  On various systems that I administer, there are cron scripts that get run via the commonly-used /etc/cron.{hourly,daily,weekly} layout. What I want to know is whether there's any common 'disable this script' functionality. Obviously, simply deleting something out of a given directory will disable it, but I'm looking for a more permanent solution. Deleting /etc/cron.daily/slocate will work to disable the nightly updatedb on my home machine (where I never use slocate), but next time I upgrade the slocate package, I'm pretty sure it'll reappear. The two distributions I'm most interested in are Gentoo and OpenSUSE, but I'm hoping there's a widely-implemented mechanism. Both distros as I have them use vixie-cron (not sure it matters).

  Read the article

• Windows Vista MAK keys and Volume Licensing..

  - by Physikal

  So when I go into the Volume Licensing Service Center and review our current used/available MAK activations, it says #/50. (the # being the number of our currently used). What I'm curious about, so far we only put vista on like 10 of our boxes. But over time, if we format a machine for some reason, then activate it, I'm assuming it will then in a way consume 2 keys? So what happens when we max the 50? Does that mean we have to fork over some more cash to M$? If so that's pretty lame.

  Read the article

• Temp profile used when User logs in

  - by TJ

  One of my users logged into his computer, Windows XP, last night only to be meet with an error message that it could not load his profile and he will be logged in using a temporary profile. Typically when this happens I shut the machine down and restart and the correct profile will load when they log in again. Not this time. In the user profile options under computer-properties-Advanced-user profiles it show that there are three profiles with his name. Two are the exact same size with the same modified date (5/5/10) and the other is what I would expect size wise for a new profile with a modified date of today. What are my options to restore his profile?

  Read the article

• problems with installation of ubuntu 12.04 (64 and 32 bits)

  - by user76104

  I am a latinoamerican so.. sorry for my english I am trying to install ubuntu on my new pc but I have serious problems. When I put the installation cd and it runs, everything goes fine until that "window" when the user have to decide if want to try ubuntu or install it on the machine.. well that "window" apears in blank, and I see that my mouse and my keyboard turn really slowly and I can't do anything I have to shut it down by pressing power botton. The specification of my pc are this Gigabyte ex58 ud7 i7 950 wester digital caviar black 6gb memory corsair evga gtx580 Please i really neeed to install ubuntu or another linux distrubution, i am usign de sismic unix program on my laptop and well. it burns when i program a script! help! please :) what can i do..? what i have to download? i am not a pro in linux so please :( be pattient with me when it starts to load the achieve ubuntu environment to enter a menu with a graphical environment but I managed to get something sturdy and gave him to try ubuntu, started to load but freezes on the sign of ubuntu with red spots and only shows me the pointer not more ..... any other option? ps: had previously tried to install the alternate version of ubuntu not having success: S

  Read the article

• How can I fix this configure error?

  - by balor123

  I'm trying to build mosh from source on a SUSE10 machine and am getting the following error: checking for protobuf... no configure: error: Package requirements (protobuf) were not met: No package 'protobuf' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables protobuf_CFLAGS and protobuf_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. I downloaded the source to protobuf and installed it in a custom path as well. I'm not using a package manager for any of this and cannot for various reasons outside the scope of the question. I added that custom path to my PATH and rehashed. Typically, this is enough for configure but in this case its not doing the trick. I added the prefix for protobuf to PKG_CONFIG_PATH but am still hitting this error. What should I do next to get past this error?

  Read the article

• Undeploy multiple SOA composites with WLST or ANT by Danilo Schmiedel

  - by JuergenKress

  As part of our current project the Build Management team asked for a solution to undeploy multiple composites at one time. Of course you have the “Undeploy All from This Partition” menu option in Enterprise Manager but since we have a lot of deployments every day the guys wanted to have a script solution. It is even more important for the nightly deployments on our continuous integration environment – strange, we couldn’t find anybody who wants to do the undeployment via Enterprise Manager manually every night ;-) However with WLST or ANT the SOA Suite comes with two options to undeploy composites via script. In this article I’d like to explain you both ways. Undeployment with WLST You can test the steps below on Oracle's Pre-built Virtual Machine for SOA Suite and BPM Suite 11g. Change to the WLST directory under MIDDLEWARE_HOME/Oracle_SOA1/common/bin. cd /oracle/fmwhome/Oracle_SOA1/common/bin/ Open WLST ./wlst.sh Connect to the SOA server Read the full article by Danilo Schmiedel SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: undeploy soa,Danilo Schmiedel,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Virtualization of desktop

  - by Agares

  Hi! I'm thinking about virtualization of my laptop(for educational purposes). My idea is to install very light host OS and have all the rest as virtual machines. Microsoft's Hyper-V Standalone would be very good solution, but it's impossible to access virtual machine from computer, where the Hyper-V is the host(isn't it?). So, which virtualization software would be good for me? I wanna have virtualized Windows 7(and maybe some other windowses). My processor support Intel Virtualization Technology.

  Read the article

• KVM not installed?

  - by NJRandy

  When I run virt-manager, and click on the icon to create a new virtual machine, I get an error that KVM is not installed or is not loaded. I use Ubuntu GNOME 14.04 All qemu packages are version 2.0.0+dfsg-2ubuntu1 qemu-kvm and many other qemu packages installed... libvirt packages: 1.2.2-0ubuntu13.1 libvirt0 libvirt-bin libvirt-doc python-libvirt virt-manager 0.9.5-1ubuntu3 When I open terminal and enter lsmod | grep kvm I get nothing returned. No lines showing kvm or kvm_amd and no error of any kind. Hardware: Tyan S2877 with dual Opteron 285s I have the latest bios and don't see any setting in there to turn virtualization on or off. when I run sudo apt-get -s install qemu-kvm Here are the results: Reading package lists... Done Building dependency tree Reading state information... Done qemu-kvm is already the newest version. The following packages were automatically installed and are no longer required: kde-l10n-engb libgtk2-gladexml-perl libqt4-test libvncserver0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. @jobin: the problem was my hardware. I just bought it a few months ago, although obviously used LOL

  Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474 475 476 477  | Next Page >