Search Results

Search found 16237 results on 650 pages for 'lock free'.

Page 471/650 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Re-cased my computer now the power plug keeps shorting

  - by dunc

  I've just re-cased my computer. I got the new case free and thought I'd be able to swap everything over myself but apparently I've done something wrong. I'm OK with components generally but wasn't totally confident about doing this. So, my question is, when setting up a new PC or moving old components into a new case, what could I have done which causes the power cable plug to short/fuse when I plug it in?. Is this likely to be an issue with the cables from my PSU, or could it be the internal case connectors? What steps would you take to diagnose the problem? I'd rather not start again if I don't have to...! Thanks in advance,

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• Updating, etc., automatically

  - by Steve D

  Is there a way to set up Ubuntu 12.04 (or earlier versions) so that all recommended updates are done automatically, say once a week? When I say automatically, I mean no password entry or user intervention required. This sounds like a stupid request, so let me tell why I'm asking. My grandfather knows nothing about computers; he uses his solely to read Yahoo! mail. I want to get rid of his clunky, spyware-ridden Windows XP and install Ubuntu. I want to set it up so when he turns the computer on, after a couple minutes, voila!, Yahoo! mail, already signed in, ready to go. The problem is I don't want to have to go over there every week or so and make sure everything is up-to-date, he hasn't accidentally installed any spyware, etc. So can this be done? Is this the best way to set things up for my grandfather? Are there other things I should be worried about when it comes to keeping things hassle-free for him? Please don't post anything like "why not teach him how to... blah blah blah". My grandfather is 80 years old and has made it clear email is the only thing he will ever use a computer for! Thanks!

  Read the article

• General purpose ticketing/tech support system [closed]

  - by crazybyte

  Possible Duplicate: What’s your favorite ticketing system? I was wondering if somebody could recommend me a very user friendly or simple general purpose ticketing/tech support system. I need something that is web based, preferably open-sourced/free software implemented using PHP, Ruby, Ruby on Rails or Java (as back end) with MySQL or PostgreSQL as database engine. I need something that is not development management oriented or project management oriented like Eventum or similar (random example), something to which the user can connect open a tech support request and be able to follow it until is solved or dropped.I need it to be open-sourced to be able to modify it if there is a need or extend it. I tried a number of such systems available and I found that osTicket or eTicket is something that it's close to what I need, but the code is somewhat flaky and some of the features are working badly or behaving strangely. Any thoughts/advice where to find something similar? Thanks!

  Read the article

• How can I malloc an array of struct to do the following using file operation?

  - by RHN

  How can malloc an array of struct to do the following using file operation? the file is .txt input in the file is like: 10 22 3.3 33 4.4 I want to read the first line from the file and then I want to malloc an array of input structures equal to the number of lines to be read in from the file. Then I want to read in the data from the file and into the array of structures malloc. Later on I want to store the size of the array into the input variable size. return an array.After this I want to create another function that print out the data in the input variable in the same form like input file and suppose a function call clean_data will free the malloc memory at the end. I have tried somthing like: struct input { int a; float b,c; } struct input* readData(char *filename,int *size); int main() { return 0; } struct input* readData(char *filename,int *size) { char filename[] = "input.txt"; FILE *fp = fopen(filename, "r"); int num; while(!feof(fp)) { fscanf(fp,"%f", &num); struct input *arr = (struct input*)malloc(sizeof(struct input)); } }

  Read the article

• Oracle Forms: Walking the path to FMW Platform – webcast September 24th 2012

  - by JuergenKress

  The next 5 year Strategy Preparing for the Next Generation Applications Oracle Forms, a component of Oracle Fusion Middleware, is Oracle's long-established technology to design and build enterprise applications quickly and efficiently. Oracle remains committed to the development of this technology, and to the ongoing release as a component of the Oracle platform. This continuing commitment to Forms technology enables you to leverage your existing investment by easily upgrading and integrating existing Oracle Forms applications to take advantage of web technologies and service oriented architectures (SOA). For more information please visit our Forms OTN page. Agenda Why update? – New business imperatives What is the path? Why walk it with Oracle? Support Lifetime – upgrade to updates Summary Audience Enterprise & Solution Architects R&D leaders Project Managers and Project Leaders Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. Duration 1 hour Forms: Walking the path to FMW September 24th, 2012, 9am BST Register Here! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Forms,PTS,future of forms,forms roadmap,forms soa,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Fusion Applications: Get Trained to Implement

  - by mseika

  0 0 1 214 1349 Technische Universität München 11 3 1560 14.0 96 800x600 Normal 0 21 false false false DE JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normale Tabelle"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","serif";} Becoming an Oracle Fusion Applications Implementation Expert gives you the opportunity to gain differentiation and a competitive advantage. Oracle University can help you to get trained and then specialized. View the current course schedule for Romania and Turkey. You can choose a delivery format to suit your learning style and situation: Classroom Training in Bucharest, Romania or Istanbul, Turkey or the travel-free options: Live Virtual Class or Training On Demand. SPECIAL OFFER Standard prices for all Oracle Fusion Applications Training On Demand courses currently have a reduced price. This offer is valid until 31 August 2013. Your OPN discount will be then applied to this reduced price to make this learning form even more attractive.

  Read the article

• Partitions for dual boot install with Windows

  - by Tim

  Following is the layout of the current partitions of my single hard drive viewed from Windows 7: C: has Windows 7 system files and my personal data; Q: for Lenovo recovery; SYSTEM_DRV: for Windows boot files; My goals are: to create another partition D: for my personal data, and dedicate C: for Windows system files and applications only. to install Ubuntu alongside Windows. D: will be shared between the two OSes. My questions are: Is it correct that the free space generated from shrinking C: will only be able to create an extended partition, since there are already 3 primary partitions? So must D: be one logical partition on the extended partition, just as the partitions for Ubuntu will be? Will this be bad sometime? If yes, other better solutions? What are the good utilities to accomplish the partition tasks? Can Ubuntu installer solely handle them? Or better to have some of the jobs done in Windows with some recommended softwares? Thanks and regards!

  Read the article

• [Outlook 2007] How to recover the deleted Tasks from a Deleted Profile?

  - by JoshuaD

  Edit: OK. I've found the OST with the tasks in it, but I am unable to import an OST into outlook, it appears it needs to be converted to PST first. Is there anyone who knows a free OST - PST converter or some way to import OSTs directly into outlook? I am using outlook 2007 linked to an MSN email account through outlook connector. I recently added [email protected] (Fake address) to my outlook and deleted [email protected]. I thought my tasks were locally stored seperately from the email address, but it turns out when I deleted [email protected], I also lost all of my tasks. This is catastrophic. Is there any way to recover them? They're not stored on the MSN web account. I figure they must still be somewhere on my computer. I just don't know where to look or how to look there. Thank you.

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• Ftp freezes despite connection seems allright

  - by Alfred M.

  I am trying to connect to a an ftp through command line using ftp ftpperso.free.fr I am then prompted for username and password. I get this message 230 User username logged in. Remote system type is UNIX. Using binary mode to transfer files. and status confirm that I am connected to the server. However when I then try any command, for instance ls the console freezes and nothing happens. Do you have any idea of what is going on?

  Read the article

• The Power of Specialization &ndash; google ads for WebLogic Specialized Partners

  - by JuergenKress

  For WebLogic specialized partner we offer free google advertisement to promote your Oracle WebLogic service offerings on your website or your WebLogic events. We will host the complete campaign management. To create your google campaign please send Jürgen Kress below: Your campaign text: 3 lines of text each 35 letters (NOT more letters!) Your campaign link: direct link to the website you want to promote Ideas for the website which we will promote with the google ads: Your Oracle WebLogic Service offerings with concrete offering e.g. WebLogic Innovation Workshop Oracle WebLogic Specialized Logo Your Oracle WebLogic References Your WebLogic Implementation consultant with pictures Your WebLogic sales contact persons Example of an WebLogic Specialization text ad: Oracle SOA Specialized plan to become more agile? eProseed the Oracle SOA Experts An interview with Griffiths Waite's Business Development Director highlighting the benefits of the Oracle Specialization Programme. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: Specialization,Google ads,Specialization benefits,WebLogic Specialization,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• State Changes in a Component Based Architecture [closed]

  - by Maxem

  I'm currently working on a game and using the naive component based architecture thingie (Entities are a bag of components, entity.Update() calls Update on each updateable component), while the addition of new features is really simple, it makes a few things really difficult: a) multithreading / currency b) networking c) unit testing. Multithreading / Concurrency is difficult because I basically have to do poor mans concurrency (running the entity updates in separate threads while locking only stuff that crashes (like lists) and ignoring the staleness of read state (some states are already updated, others aren't)) Networking: There are no explicit state changes that I could efficiently push over the net. Unit testing: All updates may or may not conflict, so automated testing is at least awkward. I was thinking about these issues a bit and would like your input on these changes / idea: Switch from the naive cba to a cba with sub systems that work on lists of components Make all state changes explicit Combine 1 and 2 :p Example world update: statePostProcessing.Wait() // ensure that post processing has finished Apply(postProcessedState) state = new StateBag() Concurrently( () => LifeCycleSubSystem.Update(state), // populates the state bag () => MovementSubSystem.Update(state), // populates the state bag .... }) statePostProcessing = Future(() => PostProcess(state)) statePostProcessing.Start() // Tick is finished, the post processing happens in the background So basically the changes are (consistently) based on the data for the last tick; the post processing can a) generate network packages and b) fix conflicts / remove useless changes (example: entity has been destroyed - ignore movement etc.). EDIT: To clarify the granularity of the state changes: If I save these post processed state bags and apply them to an empty world, I see exactly what has happened in the game these state bags originated from - "Free" replay capability. EDIT2: I guess I should have used the term Event instead of State Change and point out that I kind of want to use the Event Sourcing pattern

  Read the article

• Independent HTML5 Physics Game: Any Feedback? [closed]

  - by mndoftea

  I've been independently developing a physics-based HTML5 game. I haven't used any libraries or engines; all the code, including the physics, is my own. It is free for a while on the Chrome Web Store and I was hoping that I could get some feedback on it. You can get it for Chrome here: https://chrome.google.com/webstore/detail/dbnmkpcomailjochphnmfklofkmgenci. I know this is not a normal question, but I'm happy for answers to be abstracted/generalized for broader use. Im asking here because I don't know anyone else personally who does this stuff. Any thoughts, comments or ideas you might have would be greatly appreciated! The physics system is written in JavaScript and works by setting up the differential equations of motion (plus a few conditions) and evaluating them numerically using the Euler method. The graphics are done through the HTML5 canvas and the music is done through the audio element. (Said music is in the public domain by the way). You can see the code by going to VIewView Source in Chrome.

  Read the article

• Somebody knows why the sectors of the IBM floppy disk are named 1 to 8 (and not 0 to 7 )

  - by Olivier Briand

  I am now programming on a 8 bits Z80 computer with CP/M 2.2, (as a hobby) and the floppy disk format is IBM, 40 tracks, 8 sectors per track, 512 bytes per sector. free space is 154 Ko on each face of the disk. Why the sectors are indexed 1 to 8 (and not zero to seven, as usually is seen with computers)? The catalog of the floppy disk is on the track 1 (sector 1 to 4, 64 entries). I'm wondering is the catalog on track zero? Is the zero track reserved to included a system (as track 0 & 1 are reserved to the system on a CP/M floppy disk, and catalog is on track 2)?

  Read the article

• Need ideas on how to give my levels structure

  - by akuritsu

  I am making an iOS game for a project at school. It is going to be a tiny bit like Fruit Ninja, as in it will have different things on the screen, and when you hit them, they die, and you get points. The trouble is that unlike Fruit Ninja, my game will have different types of sprites, all doing different things (moving different places, doing different things, etc). The one thing that is bad about having all of these sprites that do different things is that it is hard for them to look neat on the screen all together. I was planning on having a couple of different gamemodes: Time Trial You have 120 seconds to kill as many sprites as possible. Survival You have three lives, every time you try to hit a sprite and miss, you lose a life. ???? Whatever I think of. I am a rookie to game design in general, and I don't know the best way to make my game look good, and play well. I could have all of these sprites on the screen at the same time, or I could have them come in waves, for example 10 of sprite_a come on, and once they are killed, 10 of sprite_b come on, etc... Please give me your opinion about which one I should code. If you have any other suggestions for either a third gamemode, or a completely different way to make the levels, feel free to tell me.

  Read the article

• Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

  - by Paul H

  I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

  Read the article

• Backup windows image to thumb drive?

  - by Dean

  I recently bought a new netbook from Malasia. It doesn't have a brand name, or officially supporting drivers. It came with a version of windows, and working drivers for all the hardware - but I want to install Ubuntu on here. Being a netbook, it has no CD/DVD drive. I want some free easy to use software to image the entire drive onto a thumb drive, which I could later use to boot up a recovery program to reinstall windows, should I fail to get all the hardware supported on Linux. I have already done some research and found driver backup/restore software in this thread, and will probably use that failing a more all-encompasing solution.

  Read the article

• Should I go with Java or Python for my next project, after using PHP for 5 years? [closed]

  - by vim

  I have a full-time PHP job and I've been working with PHP for 5 years. I'm not willing to stay within this technology stack any more. I also worked with Java for 2 year before, so for me it looks more obvious to switch back to Java. However during last 5 years I was thinking about starting my own project, and now I think I have a very good SAAS idea. I'm completely confused what technology should I use for my project. I don't want to do it in PHP, and after reading many articles about rapid prototype development it seems to me that Django is the best option. I will continue to work full time for my current employer because I need to pay my bills and will work on my project in my free time. The concern I have is should I do my project in Java or Python? To be realistic there is always a risk when you are doing your own project/start-up. If I do it in Java in the worst case scenario I believe I will be able to find a full time Java position because I already have some experience in Java + recent experience in my project. With regards to Python it looks like it is not very popular in my area and salaries are much more lower then for Java. On the other hand I have a feeling that if I chose Java it will take me a way longer to finish my project. Guys I'm completely confused and I need your advice. P.S. I have moved to London 2 years ago from another country, local guys are very welcome to share their thoughts about London's job market.

  Read the article

• Marking Discussions as Answered

  As a contributor to a number of projects on CodePlex I really like the fact that the discussions feature exists but also I need ways to help me sort the discussions threads so I can make sure no-one is getting forgotten about. Seems like a lot of you agreed as the feature request Provide feature to allow Coordinators to mark Discussions threads as 'Answered' is our number 2 voted feature right now with 178 votes.  Today we rolled out the first iteration of “answer” support to discussions. In this first iteration we wanted to keep it simple and lightweight. The original poster of the thread along with project owners, developers or editors can mark any post to the thread as an answer. You can have any number of answers marked in a thread and it’s very quick to mark or unmark a post as an answer.  We deliberately keep the answers in the originally posted order so that you can see them in context with the discussion thread. When viewing discussions the default view is still to see everything, but you can easily filter by “Unanswered”.  You can even save that as a bookmark so as someone interested in the project can quickly jump to the unanswered discussion threads to go help out on. As I mention, we kept this first pass of the answering feature as simple and as lightweight as possible so that we can get some feedback on it. Head on over to the issue tracking this feature if you have any thoughts once you have used it for a bit or feel free to respond in the comments. I already have a couple of things I think we want to do such as a refresh of the look and feel of discussions in general along, make it easier to navigate to posts that are marked an answered and surface posts that you do that were marked as answered in your profile page - but if you have ideas then please let us know.

  Read the article

• Remote desktop connection over internet without port forwarding?

  - by hellbell.myopenid.com

  Hello, let's say that we have this situation. I want to remote desktop connection to my friend over the internet, but I don't have premission for port forwarding on the router, and my friend also can't configure his router. So the question is how to connect to computer without port forwarding, I know that is out there some programs like teamviewer, or some else that solve that task, but what I looking for is the some free site that can make "bridge" between are two computer, or is it possible to install on computer some program that simulate virtual router or something like this http://www.youtube.com/watch?v=SIof7kFTgJE .... I need this cause I have my own simple remote desktop connection program, but I can't connect to other computer outside network cause don't have premission to configure router :( any comment, link, advice, or tutorials will be very helpful :)

  Read the article

• A quick tip for those working with the Windows Phone 7 AD SDK.

  - by mbcrump

  One thing that I’ve noticed in several apps in the Windows Phone 7 marketplace is the ad chopping off on the right hand side. I decided that my next Windows Phone 7 app will be ad supported so why not sign up for the Advertising SDK and investigate this issue. *Note: If you want to see this in an actual app then download the free app called “Road Rage”. So here is an example of what I am talking about: You will notice that the right hand side of the AD is chopped off using the default ad banner. You can see the border on the left hand side clearly. So, what exactly is going on? Let’s take a look at this in the designer. From this image we can see it clearer, the margin of the grid that the ad is contained in needs to be removed. By default, the ContentPanel in a Windows Phone Page has a margin already set on it. See below for an example of this: <!--ContentPanel - place additional content here--> <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0"> </Grid> If you simply remove that margin then your ad will display properly as shown below. It’s strange that I’ve seen this in multiple WP7 applications in the marketplace. If you are trying to make money off Ads, you would probably want to make sure the full ad is displayed. I am hoping this short post helped someone.   Subscribe to my feed

  Read the article

• VPS showing low disk space despite there is nothing major on it

  - by SheoNarayyan

  Hello experts, On my VPS server I was trying to see the used disk space and when I open My Computer it shows 17.9 GB free out of 39.8 GB it means that 21.9 GB space is used. However, when I select all files and folders from C: and try to see the total size, it just count approximately 11 GB. The difference is around 10 GB. Where is this 10 GB going if I have not stored anything else here? I asked above question from my VPS provider and he responded below Check hidden files/system files/etc. This is default windows OS and its utilization and not specific to setup. If you want specifics of usage, you can go ahead and get in touch with Microsoft support team and they'll provide you with exact specification of the same. I am sure that Windows OS must not be taking up 10 GB space for hidden files and folders. My VPS has Windows Server 2008 R2 installed. Can anyone help me in this on who is right?

  Read the article

• Why can't all zeros in the host portion of IP address be used for a host?

  - by Grezzo

  I know that if I have a network 83.23.159.0/24 then I have 254 usable host IP addresses because: 83.23.159.0 (in binary: host portion all zeros) is the subnet address 83.23.159.1-254 are host addresses 83.23.159.255 (in binary: host portion all ones) is the broadcast address I understand the use for a broadcast address, but I don't understand what the subnet address is ever used for. I can't see any reason that an IP packet's destination address would be set to the subnet address, so why does the subnet itself need an address if it is never going to be the endpoint for AN IP flow? To me it seems like a waste to not allow this address to be used as a host address. To summarise, my questions are: Is an IP packet's destination ever set to the subnet IP address? If yes, in what cases and why? If no, then why not free up that address for any host to use?

  Read the article

• Reducing storage cost by moving old files to external USB HDDs. Your thoughts?

  - by cparker4486

  I've got about 300GB of pictures and marketing data that is rarely accessed and I'd like to get it off my main storage. I was thinking to simply add two external USB HDDs to the server and move all the files to one of the drives. The second drive would be the backup destination for the first drive. I'm working with Server 2003 R2 SP2. This will help me free a good amount of space on my main storage as well as reduce the complexity, backup window, and usage of my backups to tape.

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >