Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 471/1211 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Would firewire networking be better than 100Megabit ethernet?

  - by Josh

  My office network has a fully switched 1000Megabit ethernet network. I have an Apple iMac with a Gigabit NIC and FireWire, and a Compaq laptop with a 100Megabit NIC and a 4-pin FireWire interface. Accessing my office's shared drives using my laptop is (obviously) much loswer using my laptop than my iMac. Would I see a noticeible performance boost if I enabled Internet Connection Sharing on my iMac and shared the private ethernet network from my iMac with my laptop over FireWire? FireWire is 480Mbit/sec, right? So would I see roughly 4x speed improvement with such a setup?

  Read the article

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• Fastest light-weight image viewer over forwarded x11 session (linux)

  - by Matthew

  I have a slow network connection over which I'm forwarding x11 over ssh. I want to view images on the remote host (Ubuntu) quickly and efficiently. I'm looking for an image viewer that will take into account the image viewer window's resolution and downsize the image before sending it over the network, instead of sending the full size image. The images I want to view will be around 5MB and I only need to be able to browse through tiny thumbnails of the images to identify the image I'm looking for. It is not necessary to be able to see more than one image at a time. Highest speed over slow network connection is the priority. Thanks! Matthew EDIT: It's possible that the way x11 forwarding works, only the image at the display resolution will be transferred anyway. If that's true, please confirm and the question still stands for which image viewer will be the fastest over a slow connection

  Read the article

• What are the most common schools of knowledge prevalent in 'great' programmers?

  - by DaveDev

  I asked this question on StackOverflow but it got shot down fairly quickly. It was suggested that I ask it here, so I've copied it from there. Hope that's ok: The question: I think that the 'great' programmers become so mostly from being exposed to and interested in programming from early ages, as well as huge amounts of dedication. Unfortunately I only discovered programming at a later age, and I sometimes feel frustrated with the difficulties I experience in trying to grok some of the more fundamental concepts the 'greats' seem to take for granted.. So my question is in relationt to that, if a 'great' programmer (i.e. top 10%) had to distill his or her knowledge into a few recommendations / books / concepts / suggestions / lessons, what would they be? What does a programmer who's willing to learn need to do to get on the right track towards becoming great? And to be more specific, I don't mean 'what does that person need to do', because the answer is almost invariably, 'practice!'. What I mean is, what does the programmer need to know?

  Read the article

• HP DL580 G5 Hyper-V networking problem

  - by mr-perfect

  Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

  Read the article

• What skills should a developer/tester learn in order to move into a permanent Systems Analysis role?

  - by shenaz

  I have been with a software services firm for 5 years and have fallen into a "jack of all trades" role, which I am looking to move out of. I've spent about 1 year each in programming (VB/VB.NET), application support, systems analysis, and most recently, software testing, which in my current position is all manual. I've really lost interest in the programming and testing roles; I would prefer a position where I get to work more with people, such as systems analysis. I even got a chance to be a trainer at the same company for a few months, a temporary position which I enjoyed very much. Given that most of my real experience is with software, support, and testing, what knowledge areas and skills should I focus on learning and mastering in order to make myself an attractive candidate for a permanent position as a business/systems analyst?

  Read the article

• Shareing two internet connections on my laptop running Windows XP

  - by ashwnacharya

  I have two internet connections, one is internet via our organization's corporate LAN network, and the other one is mobile broadband via a USB modem Is there anyway I can share internet connections and use them simultaneously? I want to use the corporate LAN network for normal browsing and connecting my email client, and I want to use the USB modem for establishing a VPN connection. Will I be able to maintain both the connections simultaneously? Can I have parallel downloads, one using our corporate network, and the other one using the mobile broadband? Will I be able to switch my browser between these two connections? My laptop runs Windows XP Service Pack 2.

  Read the article

• PCs using certain IP addresses cannot ping out

  - by Steve McCall

  I'm having a very strange problem which I just can't get past. The way our network is set up, we have 2 locations. The main office with all our PCs, and servers/ We are then joined to a local ISP via microwave link and they provide our internet gateway and house an additional storage server for us. All of the network infrastructure is within our office The problem is... When some PCs (and servers) are assigned IP addresses, they cannot ping the gateway or remote server however the remote server can ping the PC. Most of our internal IP addresses work fine but specific ones (e.g. .29) has this problem all the time. There is nothing else using the ip address and no other network problems. When we switch the IP on the PC, it works fine. Please help, I'm going mad. Thanks, Steve

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• Internet suddenly stopped working

  - by user95629

  I was using NoMachine to access Ubuntu 11.10 when suddenly the internet on Ubuntu stopped working. Now Ubuntu doesn't recognize the internet at all (including locally). Symptoms: Doesn't recognize the fact that there is an ethernet cable attached. (I've tried switching cables, didn't work.) GUI says "No network devices available" Can't ping external IP addresses. Tried changing /etc/network/interfaces to eth1 instead of eth0 but it didn't work. ifconfig provides no output relating to eth0. When I type "/etc/init.d/networking restart" it tells me "Cannot find device 'eth0'/Failed to bring up eth0." The network settings had used a static IP address prior to the crash. I don't know why it won't recognize the ethernet (I think this is the fundamental problem, but I might be wrong) and why it stopped working so suddenly--I haven't installed any updates lately. Any ideas? Any more information I should provide? EDIT: lspci recognizes the Ethernet controller; netstat does not. lspci calls it "Intel Corporation Device 0000"

  Read the article

• psloggedon timeout question

  - by user60707

  I have a list of machine names from my network that I have put in a batchfile to run through the list and show me who is logged onto each. psloggedon \machineA psloggedon \machineB psloggedon \machineC psloggedon \machineD psloggedon \machineE psloggedon \machineF Psloggedon works fine, however when it hits a machine that isnt actually on the network, it hangs for a good 30 - 60 seconds before moving onto the next machine...I was just wondering if there was any way to speed this up so that if it hits a machine that isnt on the network, it moves onto the next machine in the list much quicker. I have read in other places that this could be possible by adding a ping -n loop into the command but im not sure how to get that to work? any ideas guys? Many thanks in advance. Jimmy

  Read the article

• Computer / Software Engineering vs Other Engineering Disciplines [closed]

  - by Mohammad Yaseen

  Since this was a rather specific question, I have tried my best to present this question in a format which fits the style of this site. Please comment if it can be improved further. I have to choose the Engineering discipline on 6th Nov. My interest is in Robotics, hardware-level programming, Artificial Intelligence and back-end programming. I am currently working as a freelance developer using mainly PHP and occasionally working with GWT.I am somewhat familiar with C# and Python too. I am not super good at programming but I do like it. I am thinking to choose Computer and Information Systems Engineering as this is what I love but all the eggheads of my city are going to Mechanical Engineering and when I ask one of them Why are you choosing this? They say It's my interest and for job and the money. Basically I am confused between CIS and Mechanical Engineering, specifically the job market for both. Since this is a programmers' site I think following questions will be relevant . I am asking this because I want to take advice from professionals in this field before diving too deep . Are you happy with your job / work and pay. Are you satisfied with the work environment and career growth Do you feel OK (or great?) about the near and/or distant future of your industry. Why should a person choose Computer if he has other choices i.e what this industry has to offer in particular which other fields of work don't This industry is subject to rapid changes and you have to learn continuously throughout your entire career. Does this learning and constant hard work pay off ? In my country there is no hardware manufacturing. So most of CIS graduates (like Software Engineers) work in Software Houses. What is the scenario in your country. Is a degree titled 'Software' necessary or companies will take Computer Engineers too if they have relevant experience. I am asking this because I plan to move abroad for work. This is going to be something which I'll do for the rest of my life so I am a bit confused about the right choice. You can view the course outline for both programmes below. Computer and Information Systems Engineering. Mechanical Engineering

  Read the article

• resolv.conf doesn't get set on reboot when networking is configured for static ip

  - by kenneth koontz

  I'm experiencing, what appears to be a hostname resolution issue in ubuntu 12.04 server edition when configuring my computer to use a static ip. In /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.28 netmask 255.255.255.0 gateway 192.168.1.1 Running $ sudo apt-get upgrade, results in a 'Failed to fetch...': . . . W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en_US Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead. When I change my /etc/network/interfaces to: auto eth0 iface eth0 inet dhcp Everything works fine. Looking into /etc/resolv.conf provides some more hints...In cases where I was getting the resolving issue, resolve.conf was empty. No nameservers were specified. When I changed to dhcp from static and restarted networking. /etc/resolv.conf gets written to: 'nameserver 192.168.1.1'. Switching back from dhcp to static and restarting doesn't remove the nameserve entry. When I restart the system with static set, resolv.conf is empty. When I restart the system with dhcp set, resolv.conf has nameserver 192.168.1.1. So it appears that the issue is that resolve.conf is not getting written to correctly? Which package/code is responsible for writing to resolv.conf? Is there a particular package that I can take a look at open issues? UPDATE: istream posted a good article discussing changes to resolve.conf in 12.04. http://www.stgraber.org/2012/02/24/dns-in-ubuntu-12-04/

  Read the article

• How do I do TDD on embedded devices?

  - by Darth

  I'm not new to programming and I've even worked with some low level C and ASM on AVR, but I really can't get my head around a larger-scale embedded C project. Being degenerated by the Ruby's philosophy of TDD/BDD, I'm unable to understand how people write and test code like this. I'm not saying it's a bad code, I just don't understand how this can work. I wanted to get more into some low level programming, but I really have no idea how to approach this, since it looks like a completely different mindset that I'm used to. I don't have trouble understanding pointer arithmetics, or how allocating memory works, but when I see how complex C/C++ code looks compared to Ruby, it just seems impossibly hard. Since I already ordered myself an Arduino board, I'd love to get more into some low level C and really understand how to do things properly, but it seems like none of the rules of high level languages apply. Is it even possible to do TDD on embedded devices or when developing drivers or things like custom bootloader, etc.?

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• Lot of Multicast traffic on LAN

  - by Nel

  Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• Acer Aspire 7739G-6647 won't connect to the internet

  - by Nux

  Acer Aspire 7739G-6647, it belongs to a family member. I reinstalled the chipset, LAN drivers, ethernet controllers, etc. I'm positive it's not my router or modem or anything like that. I have other laptops running on the network, this one just has some strange issue. For some reason, it's saying "Work Offline" is enabled when I open Windows Media Player, and the PC seems to be connected to the network, but on the graphic in networking, it doesn't show the connection between the network and the internet. Could anyone try to state any possible reason for this issue? Any help is appreciated.

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Two NIC cards with the same metric - Internet traffic going out the wrong one

  - by bvanderw

  I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

  Read the article

• Cannot enable wireless on an Intel WifiLink 1000 on an Lenovo Ideapad z570

  - by Brij

  I am using the ubuntu 11.10 on lenovo ideapad z570. My wireless internet is not working. I have ensure that wireless switch is on. Windows 7, wireless works great.However ubuntu 11.10 is not allowing me to enable wireless connection. I have run the following command and here is the status. sudo lshw -class network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:1c:a4:a4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:42 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: f0:de:f1:64:b6:62 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff Here is rfkill list all output: rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Note : Windows 7, wireless card property shows that Intel WifiLink 1000 BGN. Could someone help me to fix this issue.

  Read the article

• IP alias lost when changing main IP

  - by rmflow

  my /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.3.75 netmask 255.255.255.0 gateway 192.168.3.0 Situation 1: After linux booted I set an IP alias: ifconfig eth0:0 192.168.3.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.3.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 is lost! Situation 2: After linux booted I set an IP alias: ifconfig eth0:0 192.168.4.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.4.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 stays! How do I properly change main IP, so all my aliases are not lost?

  Read the article

• Alternative to pyGame ?

  - by stighy

  Hi, i'm learning something about game programming from a book about "pyGame". pyGame is simple, but... python is a little complex and different from my previous knoweledge about programming. I know "classical" language: C# (also C/C++), Java ... I know a lot of people love Python but for me is a little harder to learn! So i'm looking something like "pyGame" but for java or for c# ... A library with which i can do almost the same thing i can do with pygame (so .. do more with less code ... and headhace). Thank you Ps: excuse my "poor" english!

  Read the article

• Unable to connect to wireless internet(wifi) through KDE plasma desktop

  - by Mohammed Arafat Kamaal

  I installed the KDE plasma desktop through Ubuntu software center. I am on Ubuntu Lucid Lynx. After the install, Im unable to connect to my wifi connection in the KDE session. But I can connect to my wifi perfectly through GNOME session. I've tried a lot without much success. Also KDE doesn't store my password correctly and keeps prompting for authorization again and again. Some of the things that I noticed. Network is detected, Network name and strength is also displayed. Other characteristics also appear properly. When the credentials are supplied, it accepts them and continually displays the message "Setting network address". However this process never succeeds. At this stage the password is repeatedly asked many times but the connection is never established. Some of the other things that I did, I have also tried other things like restarting my modem and the computer. That didn't work. I tried to restart nm-applet and KNetworkManager. That didn't work either. ifconfig display all my interfaces and Mac addresses correctly. Since its working fine GNOME the drivers are fine. This is sure a KDE specific issue. Other threads related to this on the interwebs don't offer much information either. Please share a solution for this.

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >