Search Results

Search found 17567 results on 703 pages for 'muon package manager'.

Page 472/703 | < Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• Steps to send patch to Launchpad

  - by Alois Mahdal

  With a Git/Github background and knowing very little about Bazaar VCS, I would like to occasionally report a bug to Launchpad and even send a patch. I'd like to do it in a "proper" way so that it's ready for merging or improvement while not getting in way. I can't seem to find a decent simple How-to suited for my needs. So what I did so far: I have created a Launchpad account, reported the bug, installed Bazaar and setup SSH keys etc. Now if it was Github, I'd fork the repo, clone the forked repo, create a sanely named branch and do the work, commit + push, create a pull request using Github WUI. But it's not Github, and both LP and Bazaar architectures seem quite different from their Github/Git cunterparts. So could a kind soul save me from drowning in tons of documents and complile a straightforward step path, mainly the second part? Possibly including relevant CLI commands when they are needed? Edit: It seems that I should clarify if I'm asking specifically about Ubuntu packages (whatever it means) or Launchpad packages. I don't really care much about distinction between Ubuntu packages and non-Ubuntu packages. Any software could be in Ubuntu today and out of it tomorrow, or vice-versa. The development is what matters much more than distribution. Ao I was assuming that not every single package distributed in Ubuntu is hosted on Launchpad, an "official" or "default" workflow for Launchpad exists (well if all devs can agree on using Bazaar, why couldn't most of them agree on a patching workflow?), so I'm asking about the Launchpad way, not the Ubuntu way. And I chose AU because since the intersection is vast, I guess it's pretty on topic here.

  Read the article

• What is the target of Unity?

  - by burli

  First Unity was developed for Netbooks. But the Netbook Market is shrinking. Unity is not specialized for tablet pcs like Android 3, but it may work well with some specialized Apps for those devices. Unity is still nice for Notebooks with small displays, but there is no big advantage on the desktop compared with other desktop environments like Gnome 2/3 or KDE. So what's the point? My first suggenstion was a hybrid between tablet pc and a desktop, for example for a manager. He can plug the tablet in a docking station in his office and he can work at a normal desktop, whats not possible with iOS or Android. If he is in a meeting he can use it as a tablet to make notes, for example. Or if he is somewhere else outside the office or the company. Same for normal users. They can dock the tablet and use it like a normal desktop pc or they can lie on the couch and browse in the web, read a book or chat with friend. So, thats my suggestion. But what is the real plan for Unity or Ubuntu in general? I'm curious ;)

  Read the article

• Java Embedded @ JavaOne

  - by Tori Wieldt

  Developers, tell your manager (or the other half of your developer-entrepreneur self) about this new event being held Wednesday, Oct. 3th and Thursday, Oct. 4th in San Francisco at the Hotel Nikko (during JavaOne).Java Embedded @ JavaOne is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads).A call for papers has gone out, but is ONLY for business-focused submissions. Event organizers are looking for best practices, case studies and panel discussions on emerging opportunities in the Java embedded space. Please consider submitting a paper. The deadline for submission is July 18.Attendees of both JavaOne and Oracle Openworld can attend Java Embedded @ JavaOne by purchasing a $100.00 USD upgrade to their full conference pass. Rates for attending Embedded @ JavaOne alone are here.

  Read the article

• Java Embedded @ JavaOne

  - by Tori Wieldt

  Developers, tell your manager (or the other half of your developer-entrepreneur self) about this new event being held Wednesday, Oct. 3th and Thursday, Oct. 4th in San Francisco at the Hotel Nikko (during JavaOne).Java Embedded @ JavaOne is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads).A call for papers has gone out, but is ONLY for business-focused submissions. Event organizers are looking for best practices, case studies and panel discussions on emerging opportunities in the Java embedded space. Please consider submitting a paper. The deadline for submission is July 18.Attendees of both JavaOne and Oracle Openworld can attend Java Embedded @ JavaOne by purchasing a $100.00 USD upgrade to their full conference pass. Rates for attending Embedded @ JavaOne alone are here.

  Read the article

• How to install Tor (Web Browser) in Ubuntu 12.10?

  - by Zignd

  I would like to install the Tor, but I'm having some problems. I know that someone will say "This question is a exactly duplication of How to install tor?", but it's not, because the another question can not be applied to Ubuntu 12.10 as the deb command is not available anymore. I did a research and even at the Tor's Official Website the available resource can not be applied to Ubuntu 12.10. I tried to use the deb command (as the above question says: deb http://deb.torproject.org/torproject.org <DISTRIBUTION> main) and the Terminal says deb: command not found and when I try to install it says E: Unable to locate package deb. I've also tried to use the ppa: ubun-tor, but it's not compatible with Quantal Quetzal, because it's too old. I've also tried to use sudo apt-get install tor, but browser icon don't shows up after installation and if you try to use the command tor in the Terminal I get the following error message: Nov 26 10:59:25.731 [notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Nov 26 10:59:25.731 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Nov 26 10:59:25.731 [notice] Read configuration file "/etc/tor/torrc". Nov 26 10:59:25.737 [notice] Initialized libevent version 2.0.19-stable using method epoll (with changelist). Good. Nov 26 10:59:25.737 [notice] Opening Socks listener on 127.0.0.1:9050 Nov 26 10:59:25.737 [warn] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Nov 26 10:59:25.737 [warn] Failed to parse/validate config: Failed to bind one of the listener ports. Nov 26 10:59:25.737 [err] Reading config failed--see warnings above. Thanks in advance.

  Read the article

• How important is Domain knowledge vs. Technical knowledge?

  - by Mayank

  I am working on a Trading and Risk Management application and although from a C# background, I have been asked to work on SSIS packages. Now I can live with that. The pain point is that there is too much emphasis on business understanding. Trading (Energy Trading to be exact) is a HUGE area and understanding every little bit of it is overwhelming. But for the past two months I have been working on understanding the business terms - Mark To Market, Risk Metrics, Positions, PnL, Greeks, Instruments, Book Structure... every little detail (you get the point). Now IMHO, this is the job of a BA. Sure it is very important for developers to understand the business but where do you draw the line? When I talked to my manager about this, he almost mocked me by saying that anybody can learn a technology in a week. It's the business that's harder. My long term aspiration is to remain on the technical side, probably become an architect (if possible). If I wanted to focus so much on business I would have pursued an MBA! I want to know if I am wrong or too naive in understanding the business importance or is my frustration justified?

  Read the article

• Terminal/Putty showing control characters (^M) after updating

  - by jaycee48

  I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

  Read the article

• How to configure ubuntu ldap client to get password policies from server?

  - by Rafaeldv

  I have a ldap server on CentOS, 389-ds. I configured the client, ubuntu 12.04, to authenticate on that base and it works very well. But it don't gets the password policies from server. For example, if i set the policy to force user to change the password on first login, ubuntu ignores it and logs him in, always. How can i setup the client to get the policies? Here are the client files: /etc/nsswitch.conf passwd: files ldap group: files ldap shadow: files ldap hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis sudoers: ldap files common-auth auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_ldap.so use_first_pass auth requisite pam_deny.so auth required pam_permit.so auth optional pam_cap.so common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 default=ignore] pam_ldap.so account requisite pam_deny.so account required pam_permit.so common-password password requisite pam_cracklib.so retry=3 minlen=8 difok=3 password [success=2 default=ignore] pam_unix.so obscure use_authtok try_first_pass sha512 password [success=1 user_unknown=ignore default=die] pam_ldap.so use_authtok try_first_pass password requisite pam_deny.so password required pam_permit.so password optional pam_gnome_keyring.so common-session session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_umask.so session required pam_unix.so session optional pam_ldap.so session optional pam_ck_connector.so nox11 session optional pam_mkhomedir.so skel=/etc/skel umask=0022 /etc/ldap.conf base dc=a,dc=b,dc=c uri ldaps://a.b.c/ ldap_version 3 rootbinddn cn=directory manager pam_password md5 sudoers_base ou=SUDOers,dc=a,dc=b,dc=c pam_lookup_policy yes pam_check_host_attr yes nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,colord,daemon,games,gnats,hplip,irc,kernoops,libuuid,lightdm,list,lp,mail,man,messagebus,news,proxy,pulse,root,rtkit,saned,speech-dispatcher,sshd,sync,sys,syslog,usbmux,uucp,whoopsie,www-data /etc/ldap/ldap.conf BASE dc=a,dc=b,dc=c URI ldaps://a.b.c/ ssl on use_sasl no tls_checkpeer no sudoers_base ou=SUDOers,dc=a,dc=b,dc=c sudoers_debug 2 pam_lookup_policy yes pam_check_host_attr yes pam_lookup_policy yes pam_check_host_attr yes TLS_CACERT /etc/ssl/certs/ca-certificates.crt TLS_REQCERT never

  Read the article

• to upgrade / install wine 1.55 on ubuntu 12.04 or any distro

  - by user67550

  Wine news and installation 1.5.5 on ubuntu Now available in PPA wine version 1.55, an application that lets Windows programs run on any distribution with GNU / Linux. Wine (recursive acronym in English for Wine Is Not an Emulator, which means "Wine Is Not an Emulator") is a reimplementation of the application programming interface for Win16 and Win32 operating systems based on Unix. Allows execution of programs designed for MS-DOS and Microsoft Windows Version 3.11, 95, 98, Me, NT, 2000, XP, Vista and 7 The name was originally an acronym Wine Windows Emulator. This meaning was later changed to the current recursive acronym. These are some of the highlights: Support for the installation of Mono as a complement to wine in the package. The dither pattern brushes in the motor DIB. Support to install the runtime. NET 4.0. D3dx9 DDS files supported. Several bug fixes. To install on Ubuntu just open the console and type: sudo add-apt-repository ppa: ubuntu-wine/ppa sudo apt-get update sudo apt-get install wine1.5 Source: ubuntutips If you enjoyed this post share it with your friends, thanks

  Read the article

• error while trying to play .mp4 file

  - by Husni

  after agree to download and install extra multimedia plugins, it says package dependency can not be resolved, with below error: The following packages have unmet dependencies: gstreamer0.10-plugins-bad:i386: Depends: libc6 (>= 2.15) but 2.15-0ubuntu20 is to be installed Depends: libcairo2 (>= 1.2.4) but 1.12.3+git20120608.f228769d-0ubuntu0ricotz~quantal0 is to be installed Depends: libcdaudio1 (>= 0.99.12p2) but 0.99.12p2-12 is to be installed Depends: libcurl3-gnutls (>= 7.16.2) but 7.27.0-1ubuntu1 is to be installed Depends: libdvdnav4 (>= 4.2.0+20120524) but 4.2.0+20120524-2 is to be installed Depends: libfaad2 (>= 2.7) but 2.7-8 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.7.2-2ubuntu1 is to be installed Depends: libglib2.0-0 (>= 2.31.8) but 2.34.0-1ubuntu1 is to be installed Depends: libgsm1 (>= 1.0.13) but 1.0.13-4 is to be installed Depends: libgstreamer-plugins-bad0.10-0 (= 0.10.23-7ubuntu1) but 0.10.23-7ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu2 is to be installed Depends: libmpcdec6 (>= 1:0.1~r435) but 2:0.1~r459-1ubuntu1 is to be installed Depends: libopenal1 (>= 1:1.13) but 1:1.14-4ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-2 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.49-1ubuntu1 is to be installed Depends: librsvg2-2 (>= 2.14.4) but 2.36.3-0ubuntu1 is to be installed Depends: librtmp0 (>= 2.3) but 2.4+20111222.git4e06e21-1 is to be installed Depends: libschroedinger-1.0-0 (>= 1.0.9) but 1.0.11-2 is to be installed Depends: libsndfile1 (>= 1.0.20) but 1.0.25-5 is to be installed Depends: libssl1.0.0 (>= 1.0.0) but 1.0.1c-3ubuntu2 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.7.2-2ubuntu1 is to be installed Depends: libvpx1 (>= 1.0.0) but 1.1.0-1 is to be installed Depends: libxvidcore4 (>= 1.2.2) but 2:1.3.2-9 is to be installed

  Read the article

• What went wrong with my curl install?

  - by Danjah

  I'm fresher than the prince to Linux, I've been following the instructions here: http://chrisfulstow.com/running-node-js-on-windows-with-virtualbox-and-ubuntu (the link tells what I am generally trying to do). I'm all up and running in VBox, and am at the curl install part, I may have done the curl part a week ago I forget. So I ran this command anyway: danjah@danjah-VirtualBox:~$ sudo apt-get install curl Result: [sudo] password for danjah: Reading package lists... Done Building dependency tree Reading state information... Done curl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Then: $ curl http://npmjs.org/install.sh | sudo npm_install=rc sh Result: fetching: { gzip: stdin: unexpected end of file /bin/tar: Child returned status 1 /bin/tar: Error is not recoverable: exiting now It failed Should I be concerned? How can I test curl? How can I avoid these situations? Perhaps there's a generic way of checking to see if I've already installed packages/etc? Case specific answers and general advice most appreciated. cheers, d

  Read the article

• How do I finish installing Sun JDK after cancelling out of the legal term screen?

  - by Ravi

  I am a newcomer to linux and have had lots of problems in installing java on my newly installed Ubuntu 11.10. I use a statistical programming environment called R and many of the packages there require java (the sun variety, I am told). I tried the following : sudo add-apt-repository ppa:ferramroberto/java sudo apt-get update sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts (after this, I wanted to continue with (but never got that far) : sudo apt-get install sun-java6-jdk After this, a window appeared with the heading, "Configuring jre", or something like that. Below was a long list of legal text about accepting Sun's terms. I did not know how to close this window (no obvious option like pressing return worked). After a long time, when nothing seemed to happen, I finally closed the window. After that, I could not open synaptic. I got the error message : dpkg was interrupted. You must manually run 'sudo dpkg --configure -a' I did this. But it does not help. I have java as a "broken" program. When I try to remove the program from synaptic, I get a message that I must reinstall it again.I do not know what I should do. I want to install jdk6. And also remove the open jdk which is still persistently present in my system. I tried the clean and purge command shown below. Next, I tried to remove the sun-java6-jre from synaptic. I get the following message :E: sun-java6-jre: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. When I tried to follow the procedure suggested in the related question (from the link suggested below), I get the following message on trying to install again :Could not mark all packages for installation or upgrade.The following packages have unresolvable dependancies. Make sure that all required repositories are added and enabled in the preferences. sun-java6-bin : Depends: sun-java6-jre but it is not going to be installed

  Read the article

• Serious problem with mobile modems in UBUNTU to look [on hold]

  - by kitten 94

  I use mobile broadband using data card(modem) with simcard on ubuntu 14.04. My friends,relatives,boss used to make phone call to my sim on modem, & they get the ringsound on their phone but I cannot find any alert on ubuntu about the phone call. They think that I will call back to them & gets disappointed. Some even gets angry "that I am not attending the mobile call intensionally". They even do not not believe me,saying that computer can also pick a mobile call keeping mobile partner in their mind . Is there any way just to find out call & who it is call ? so that I can call to them later. or Is their any software like mobile partner to ubuntu to recive & make phone calls? Modem Manager GUI is helpful only just to send SMS, even USSD not works in it, inorder to receive SMS I have to close & open the windows repeatedly. please,please help me. Any help or ideas is thankful. Waiting for your's reply.

  Read the article

• UDF Partition reported full when it is not

  - by Capt.Nemo

  I was using these instructions to setup an external hard disk with udf. I have been able to setup a multi-partition system using those instructions, but I seem to have hit a wall, where the partition is reported as full while writing to the disk. Every other tool available to me reports it as free. Relevant lshw output Here's a screenshot showing the disk: Both the output of df and the file manager (caja) report the disk as free. Filesystem Size Used Avail Use% Mounted on /dev/sda9 9.0G 7.6G 910M 90% / udev 974M 12K 974M 1% /dev /dev/sda1 50G 47G 295M 100% /media/Data /dev/sda6 49G 41G 5.9G 88% /home /dev/sda2 155G 127G 29G 82% /media/Entertainment /dev/sda8 14G 13G 516M 96% /media/Stuff /dev/sdb2 120G 1.9G 112G 2% /media/3c887659-5676-4946-875b-b797be508ce7 /dev/sdb3 11G 2.6G 7.7G 25% /media/108b0a1d-fd1a-4f38-b1c6-4ad1a20e34a3 /dev/sdb1 802G 34G 768G 5% /media/disk I seem to have hit a wall near the 35GB mark. Despite being shown as 35gb/860gb used everywhere, the following happens on a write attempt: [2017][/media/Dory]$ echo D>>echo bash: echo: write error: No space left on device Writing byte by byte, the maximum I can take it to is 34719248K. The most weird part is that on mounting it Windows, Windows can write to the disk easily, and the writes are being read fine back in Ubuntu. However, the used-bytes remains at 34719248K in Ubuntu (It goes higher on Windows, however).

  Read the article

• Lucene best practice

  - by Dragos

  I am trying to understand how Lucene should be used. From what I have read, creating an IndexReader is costly, so using a Search Manager shoulg be the right choice. However, a SearchManager should be produced by a NRTManager(which, by the way, should replace the IndexWriter for every add or delete operation performed). But in order to have a NRTManager, I should first have an IndexWriter, and here comes my problem. The documentation says: an IndexWriter is thread-safe the constructor of this class takes a Directory object, so it seems creating an instace should be costly(as in the case of an IndexReader) all changes are buffered and flushed periodically(so they seem to encourage using a single instance) but: the changes, although flushed will only be visible after commit or close after finished making updates(add/delete), the instance should be closed I also found this: http://stackoverflow.com/questions/5374419/forgot-to-close-the-lucene-indexwriter-after-adding-documents-to-the-index where it is said that not closing a writer might ruin everything So what am I really supposed to do? Is having a single IndexWriter instance a good idea(make only commit and never close it)? EDIT: What is more, if I use NRTManager, how can I make acommit`? Is it even possible?

  Read the article

• EBS ATG Advisor Webcasts - FREE!

  - by cwarticki

  For June 2012 we have scheduled 2 Webcasts - E-Business Suite OAM Overview and Usage session and the E-Business Suite Workflow Avisor.  We are driving 2 sessions for a better global alignment. E-Business Suite - OAM Overview and Monitoring   Agenda Oracle Applications Manager (OAM) Overview Log files Diagnostics and Logging Concurrent processing through OAM Applications Dashboard Troubleshooting Patch Management. Patch Wizard OAM "How To" Documents Questions &Answers EMEA Session : July 10, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466056.1 Direct link to register in WebEx US Session : July 11, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466057.1 Direct link to register in WebEx E-Business Suite - Workflow Analyzer - Follow-Up Agenda Overview of Workflow Analyzer Enhancements implemented in the latest Release Questions & Answers EMEA Session : July 24, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466058.1 Direct link to register in WebEx US Session : July 25, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466059.1 Direct link to register in WebEx Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

  Read the article

• Netbook Remix 10.04 to 10.10 upgrade using alternate iso

  - by Suman Subramonian

  I'm using Netbook Remix 10.04 now. I'm having the 10.10 alternate iso with me. If I use that iso to upgrade, will I lose my netbook version? I've seen in some forums that the upgrade resulted in a change from netbook version to desktop version. Updated on 15/12/2010 I upgraded the OS from 10.04 to 10.10. But I'm getting an error like this after restart: modprobe: FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory I searched in the forums and got a solution like this: Open Terminal gksudo gedit /etc/initramfs-tools/initramfs.conf change the line MODULES=most to MODULES=dep Then use Synaptic (SystemAdministrationSynaptic Package Manager) to reinstall initramfs-tools. I'll be definitely trying this later. After that when the system tries to login, my screen starts flashing with just the ubuntu netbook desktop wallpaper on the screen. No other options will be available. It will be flashing continuosly. If I press the power button then one window comes up with options like Shut down, Restart, Hibernate etc. And the screen won't stop flashing either. I've uploaded a 1 min video. Please go through it as it will give you a clear idea of the error which I'm facing now Video Link Here

  Read the article

• E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by kss

  sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Lead Programmer definition clarification

  - by Junaid

  I am working on PHP and MySQL based web application for more than 5 years now. I started my career from Intern - Jr Developer - Software Developer - Sr. Software Engineer [Team Lead] that's what I am nowadays. I was looking at the link at Wikipedia regarding who is a lead programmer. The link states the following: A lead programmer is a software engineer in charge of one or more software projects. Alternative titles include Development Lead, Technical Lead, Senior Software Engineer, Software Design Engineer Lead (SDE Lead), Software Manager, or Senior Applications Developer. When primarily contributing in a high-level enterprise software design role, the title Software Architect (or similar) is often used. All of these titles can have different meanings depending on the context. My current job responsibilities are more or less like a Development Lead and to some extent near Software Architect because I usually design the core structure of new products and managing 2-3 project simultaneously and in the meantime involved in assisting other teams regarding the structural design of their projects, I am usually on call with clients along with project managers, I code most of the time when my team stuck somewhere / workload / integrating some third party API and etc. Primary reason of this writing is to know if I qualify for a Development Lead Title? in accordance with my above mentioned job descriptions?

  Read the article

• Central renderer for a given scene

  - by Loggie

  When creating a central rendering system for all game objects in a given scene I am trying to work out the best way to go about passing the scene to the render system to be rendered. If I have a scene managed by an arbitrary structure, i.e., an octree, bsp trees, quad-tree, kd tree, etc. What is the best way to pass this to the render system? The obvious problem is that if simply given the root node of the structure, the render system would require an intrinsic knowledge of the structure in order to traverse the structure. My solution to this is to clip all objects outside the frustum in the scene manager and then create a list of the objects which are left and pass this simple list to the render system, be it an array, a vector, a linked list, etc. (This would be a structure required by the render system as a means to know which objects should be rendered). The list would of course attempt to minimise OpenGL state changes by grouping objects that require the same rendering operations to be performed on them. I have been thinking a lot about this and started searching various terms on here and followed any additional information/links but I have not really found a definitive answer. The case may be that there is no definitive answer but I would appreciate some advice and tips. My question is, is this a reasonable solution to the problem? Are there any improvements that I could make? Are there any caveats I should know about? Side question: Am I right in assuming that octrees, bsp trees, etc are all forms of BVH?

  Read the article

• foreign-architecture

  - by speedy-MACHO

  Always when I install something, I get the following error multiple times: Unknown configuration key 'foreign-architecture' found in your 'dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with 'dpkg --add-architecture' invocations at the command line. When I try dpkg --add-architecture I get: Unknown configuration key `foreign-architecture' found in your `dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with `dpkg --add-architecture' invocations at the command line. dpkg: error: --add-architecture takes one argument Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! I've no problems yet, but since it says This warning will become a hard error at a later date I better do something about this. When I search 'foreign-architecture', I find an empty file, containing not a single byte. I somehow can't delete that file. Please help, it's a kind of creapy...

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• CodePlex Daily Summary for Wednesday, August 13, 2014

  CodePlex Daily Summary for Wednesday, August 13, 2014Popular ReleasesLozzi's SharePoint 2013 Scripts: Lozzi.Fields (without Site Col Admin): This file is the same as the primary download, however I've removed the override allowing Site Collection Administrators access regardless of groups. This applies to the disableWithAllowance and hideWithAllowance functions.bitboxx bbcontact: 01.00.00: Release Notes bitboxx bbcontact 01.00.00bbcontact 01.00.00 will work for any DNN version 6.1.0 and up. - Initial releaseAD4 Application Designer for flow based .NET applications: AD4.AppDesigner.23.27: AD4.Iteration.23.27(Advanced Rendering Features) Refacturing: RenderStepPinsCaptions simplified by extending FlowChartStepPinDecoratorExtensions RenderFlowChartPinsCaptions simplified by FlowChartFlowPinDecoratorExtensions RenderWiresCaptions simplified by FlowChartWireDecoratorExtensions Design of tutorial samples updated Next tutorial finished: ThreadAsynchronizer Pattern (Version V7) ToDo: Some tutorials are unfinished but coming soon ... Note: The gluing code of the AD4.AppDesig...OooPlayer: 1.1: Added: Support for speex, TAK and OptimFrog files Added: An option to not to load cover art Added: Smaller package size Fixed: Unable to drag&drop audio files to playlist Updated: FLAC, WacPack and Opus playback libraries Updated: ID3v1 and ID3v2 tag librariesEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...Python Tools for Visual Studio: 2.1 RC: Release notes for PTVS 2.1 RC We’re pleased to announce the release candidate for Python Tools for Visual Studio 2.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, editing, IntelliSense, interactive debugging, profiling, Microsoft Azure, IPython, and cross-platform debugging support. PTVS 2.1 RC is available for: Visual Studio Expre...Aspose for Apache POI: Missing Features of Apache POI SS - v 1.2: Release contain the Missing Features in Apache POI SS SDK in comparison with Aspose.Cells What's New ? Following Examples: Create Pivot Charts Detect Merged Cells Sort Data Printing Workbooks Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.AngularGo (SPA Project Template): AngularGo.VS2013.vsix: First ReleaseDaphne 2014 - application for playing Czech Draughts: Daphne 2014 verze 0.9.0.21: Daphne 2014 verze 0.9.0.21MFCBDAINF: MFCBDAINF: Added recognition of TBS, Hauppauge, DVBWorld and FireDTV proprietary GUID'sFluffy: Fluffy 0.3.35.4: Change log: Text editorSKGL - Serial Key Generating Library: SKGL Extension Methods 4 (1.0.5.1): This library contains methods for: Time change check (make sure the time has not been changed on the client computer) Key Validation (this will use http://serialkeymanager.com/ to validate keys against the database) Key Activation (this will, depending on the settings, activate a key with a specific machine code) Key Activation Trial (allows you to update a key if it is a trial key) Get Machine Code (calculates a machine code given any hash function) Get Eight Byte Hash (returns an...Touchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesPublic Key Infrastructure PowerShell module: PowerShell PKI Module v3.0: Important: I would like to hear more about what you are thinking about the project? I appreciate that you like it (2000 downloads over past 6 months), but may be you have to say something? What do you dislike in the module? Maybe you would love to see some new functionality? Tell, what you think! Installation guide:Use default installation path to install this module for current user only. To install this module for all users — enable "Install for all users" check-box in installation UI ...Modern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...Roll20 Custom Power Card Macro Generator: R20CPCMG 0.2.0.0 Public Beta: This is the beta release for version 0.2.0.0. Its still very much a work in progress, but I'd rather get this out now before another lapse in updates so we can solicit feedback from the community. The two main updates for this version is that you can now import macros and you can customize the tag buttons and group them by game system. The Import Macro function turns the raw text, like the following, into something you can easily edit inside the program. !power --name|Whirling Assault --us...Utility Database: UtilityDB.2.0: Release Notes: Version 2.0 This is the second release of the UtilityDB, it builds on top of and includes the Version 1.8 of code. This release focus on performance metrics in particular Disk I/O. The deployment scripts have been rewritten to utilize transactions to insure completeness of script execution. This project releases the source code as a SQL Server 2012 project file. The intended way to deliver the scripts to the database is through the execution of the @BuildScript.sql in the ...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...SEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...jQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialNew Projectsangle.works: Sample AngularJS projectArtezio spTree for SharePoint 2013: spTree is a jQuery plugin to display SharePoint websites and lists in a tree view. It uses jsTree plugin to display data, expand and complement its settings.DigitalProject: no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no project ,no popenelecmedicrec: its an open source emrPetriFlow: A new solution for workflow using Petri NetReflexive .Net: Stream transformation over durable and transient channelsrunner-prototype: Small game prototype for self-practicing, likely no use at all for anyone else.Spizzi PowerShell Module: This project provides different PowerShell CmdLet's combined into one module to extend the built-in PowerShell Modules.Testill: Test Web Fabricator: A highly composable web fabricwingate log parser: wingate log parser

  Read the article

• Failure Driven Development

  - by DevSolo

  At our shop, we strive to be agile. And I'd say we are making great strides. That said, a few of us have spotted a pattern we have started calling "Failure Driven Development". Failure Driven Development can basically be desribed as an agile release/iteration cycle where the bugs/features are guided not by tasks and stories with acceptance criteria, but with defects entered in the defect tracking software. Our team has a great Project Manager who strives to get the acceptance criteria from the customer(s), but it's not always possible. From my development chair, this is due to the customer either not knowing exactly what they want or (and this is the kicker) two different "camps" at the customer's main office conflict with how a story should be implemented. Camp A will losely dictate that Feature X works like this, then Camp B will fail it due not functioning like that. Hence, the term "FDD". The process is driven by "failures". This leads to my question: Has anyone else encountered this and if so, any tips/suggestions for dealing with it? We have, of course, tried to get Camp A and B to agree prior, but everyone knows this isn't always the case. Thanks

  Read the article

< Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >