Search Results

Search found 30819 results on 1233 pages for 'software security'.

Page 474/1233 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

    - by rodey
    EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why the ShrewSoft VPN client would connect but the Cisco connection won't. I'm not our network admin so sorry if I butcher some of the terminology. I have a computer at remote site that connects to our network through Cisco VPN. It uses the Cisco VPN software to do so. The problem is that the computer at this site cannot connect to our VPN because it is getting error "Reason 412: The remote peer is no longer responding." To see if perhaps something on their network was blocking the connection, I installed the ShrewSoft VPN client on the computer, imported our .pcf file and connected with no problem. I have tried two different versions of the Cisco VPN software (4.8.0.* and 5.0.03.*) and have the same problem. I installed Wireshark on the computer and have confirmed (while trying to connect through Cisco) that the computer is trying to contact the VPN server but is not receiving a response. We are not having any other problems regarding users not being able to connect. I'm at a loss at what else to check. I'll be monitoring this and have access to the computer at any time.

    Read the article

  • How to move my data from my old MacBook Pro to my new one?

    - by Tim Büthe
    I just purchased a new MacBook Pro and already got an 2008 model. I wonder how I move all my data over to the new one. My first idea was, to use my Time Machine backup and restore from it, which seems to be a good idea and should work just fine regarding to this link: http://blog.duncandavidson.com/2008/01/restoring-from-time-machine.html. But, since my current MacBook got older Software on it, like iLife '08 instead of iLife '09 I would have to upgrade this afterwards. Is this correct, or does Time Machine does some magic to exclude well known software? And is it possible to reinstall or upgrade iLife with the included installation DVDs? My second idea is, to just swap the hard drives instead of using the Time machine backup. If it is not too complicated to remove the hdd, this should be the fastest way. This also has the benefit, that the 2008er MacBook then contains a brand new installation and I don't have to remove all my stuff or reinstall Mac OS before I give it away. My question on that second idea would be: does snow leopard handle this stuff correctly? I reboot with the new hardware and all just works fine? So in a nutshell: What would you do: restore from backup or swap drives? And what about the new software?

    Read the article

  • Yum Error Installing Git from kernel.org Repo

    - by Lance
    I want to install the latest version of Git using yum and the RPM repository on kernel.org, but adding the repo to yum.repos.d causes yum to fail with checksum errors. The prevailing solution to this issue seems to be to simply use the repository at Webtatic as answered here on superuser. I know I can also install an older version of Git using the EPEL repo, or compile from the latest source tarball, but honestly I want to understand why I'm having issues using the kernel.org repo. Here’s the workflow, after a clean install of CentOS 5.5 and "yum update": [root]# wget -P /etc/yum.repos.d/ http://kernel.org/pub/software/scm/git/RPMS/git.repo [root]# yum clean all [root]# yum repolist Loaded plugins: fastestmirror Determining fastest mirrors * addons: mirrors.netdna.com * base: mirror.clarkson.edu * epel: serverbeach1.fedoraproject.org * extras: centos.mirror.nac.net * updates: mirror.cogentco.com addons | 951 B 00:00 addons/primary | 202 B 00:00 base | 2.1 kB 00:00 base/primary_db | 1.6 MB 00:01 epel | 3.7 kB 00:00 epel/primary_db | 2.8 MB 00:01 extras | 2.1 kB 00:00 extras/primary_db | 188 kB 00:00 git | 1.2 kB 00:00 git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. Error: failure: repodata/primary.xml.gz from git: [Errno 256] No more mirrors to try. Any suggestions as to a solution, or details why the kernel.org repo has this issue? (Sorry I can't include more links to my references, but I don't have the reputation for that yet.)

    Read the article

  • Can I rely on S3 to keep my data secure?

    - by Jamie Hale
    I want to back up sensitive personal data to S3 via an rsync-style interface. I'm currently using s3cmd - a great tool - but it doesn't yet support encrypted syncs. This means that while my data is encrypted (via SSL) during transfer, it's stored on their end unencrypted. I want to know if this is a big deal. The S3 FAQ says "Amazon S3 uses proven cryptographic methods to authenticate users... If you would like extra security, there is no restriction on encrypting your data before storing it in Amazon S3." Why would I like extra security? Is there some way my buckets could be opened to prying eyes without my knowing? Or are they just trying to save you when you accidentally change your ACLs and make your buckets world-readable?

    Read the article

  • How can I stop Flash from leaving full-screen mode when it loses focus due to a mouse-click in the o

    - by therefromhere
    On a multi-monitor system, if I'm viewing a full-screen video in Flash on one monitor, clicking the mouse on the other monitor causes Flash to leave full-screen mode and revert to normal size. What's the easiest way of preventing this that works on my version of Flash? My system is Flash 10 (10.0.12.36), in Firefox 3.5 on Windows Vista 64, but I think it affects all current versions. This is very annoying behaviour, but unfortunately, according to this bug report response it seem to be a security feature, rather than a bug: We understand that many users would like fullscreen on one monitor and to be able to interact with your OS on another monitor. However, due to security requirements, we require that Flash and Browser must be the current focus of your OS.

    Read the article

  • Yum Error Installing Git from kernel.org Repo

    - by Lance
    I want to install the latest version of Git using yum and the RPM repository on kernel.org, but adding the repo to yum.repos.d causes yum to fail with checksum errors. The prevailing solution to this issue seems to be to simply use the repository at Webtatic as answered here on superuser. I know I can also install an older version of Git using the EPEL repo, or compile from the latest source tarball, but honestly I want to understand why I'm having issues using the kernel.org repo. Here’s the workflow, after a clean install of CentOS 5.5 and "yum update": [root]# wget -P /etc/yum.repos.d/ http://kernel.org/pub/software/scm/git/RPMS/git.repo [root]# yum clean all [root]# yum repolist Loaded plugins: fastestmirror Determining fastest mirrors * addons: mirrors.netdna.com * base: mirror.clarkson.edu * epel: serverbeach1.fedoraproject.org * extras: centos.mirror.nac.net * updates: mirror.cogentco.com addons | 951 B 00:00 addons/primary | 202 B 00:00 base | 2.1 kB 00:00 base/primary_db | 1.6 MB 00:01 epel | 3.7 kB 00:00 epel/primary_db | 2.8 MB 00:01 extras | 2.1 kB 00:00 extras/primary_db | 188 kB 00:00 git | 1.2 kB 00:00 git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. Error: failure: repodata/primary.xml.gz from git: [Errno 256] No more mirrors to try. Any suggestions as to a solution, or details why the kernel.org repo has this issue? (Sorry I can't include more links to my references, but I don't have the reputation for that yet.)

    Read the article

  • How secure is Windows IPSec VPN?

    - by sergeb
    I know the answer is, depends on how you configure it... But bare with me - our IPSec Site-to-Site VPN is configured by one of the most trusted hosting companies. One of our clients expressed concerns that "Windows Server 2008 Server IPSEC is not ICSA certified and lacks some of the common features for maintaining VPN stability" (they refer to the lack of "auto keep live" feature). They also are saying that "Windows platforms are not recommended as VPN endpoints due to security concerns and this is one reason that the ICSA testing labs will not certify it as a valid IPSEC solution" (I couldn't find a proof to this one) Are there any whitepapers or references that can prove the security of Windows IPSec implementation? Thanks!

    Read the article

  • Why aren't Heroku syslog drains logging to rsyslogd?

    - by Benjamin Oakes
    I'm having a problem using syslog drains as described in https://devcenter.heroku.com/articles/logging. To summarize, I have an Ubuntu 10.04 instance on EC2 that is running rsyslogd. I've also set up the security groups as they describe, and added a syslog drain using a command like heroku drains:add syslog://host1.example.com:514. I can send messages from the Heroku console to my rsyslogd instance via nc. I see them appear in the log file, so I know there isn't a firewall/security group issue.  However, Heroku does not seem to be forwarding log messages to the server that heroku drains lists. I would expect to see HTTP requests, Rails messages, etc. Is there something else I can try to figure this out? I'm new to rsyslogd, so I could easily be missing something.

    Read the article

  • Windows 7 64bit will not register a 32bit DLL

    - by Bad Neighbor
    I'm trying to install a 32bit Oracle instant client onto several Windows 7 PCs. This version is the one required by the customer's software. I have successfully installed it on about a dozen PCs using the same installer, but two machines refuse to register a DLL. The two PCs are of different make and model. I have been able to install this software in the past on these models. This is the error that the installer throws up: The file copies to the location referenced above. If I choose to ignore the error and manually register it later, I get the following error: This error is returned whether I use the 32bit (syswow64) or 64bit version of regsvr32. Command Prompt is run as admin, and the ID with which I'm logged into the PC is an admin. I've tried copying the file into the syswow64 folder, but I get the same error. This same installer works on other PCs. To further complicate the issue, one of the two PCs also will not register an OCX file from a different 32bit installer: Both PCs are relatively new and have standard software installed. We use MS Forefront for security, but disabling that didn't change the behavior. What am I missing?

    Read the article

  • What to do with a broken OS X install disc?

    - by slhck
    First things first: I don't appreciate software piracy and I really want to spend money on software that I use and that I work and make money with. I don't want this question closed just because I consider downloading software, I only want honest opinions and alternatives. Here we go: So I have my OS X Snow Leopard Upgrade DVD, but it's horribly scratched and won't boot anymore. It endlessly loads and at some point I have to force pull it out of the disc slot. How can I reset my Mac then? Can I take my original disk to an Apple Store and ask them for a replacement? Will they believe me, even if I don't have the receipt anymore? Would owning the original disk make it okay for me to look somewhere on the internet and download it? I don't even know if that will work without hassles. Could I try to read the disk to an image with some error correction methods? Maybe during boot it can't read some files, but some other program can? Is there any other way of resetting the Mac? Mine's now over 3 years old an I seem to have misplaced my original discs that had 10.4 on it. Or should I just buy a new 10.6 upgrade disk? (Which is not really what I want to do) Answers and opinions would be much appreciated.

    Read the article

  • SQL Server 2000 + ASP.NET: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by Rick
    I just migrated a development workstation FROM: Windows XP Pro SP3 with IIS 6 TO: Vista Enterprise 64bit with IIS 7 Since the move, one of my pages that accesses an SQL Server 2000 database is receiving the following error from my ASP.NET 2.0 web page: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'." I have: enabled Windows Authentication in IIS and web.config disabled Anonymous Authentication in IIS set up Impersonation to run as the authenticated user verified that the logged in user (in this case, me) has access to the appropriate database on the SQL Server verified that my login and impersonation information is correct in the ASP.NET page by checking User.Identity.Name and System.Security.Principal.WindowsIdentity.GetCurrent().Name (both display my username) My connection string using SqlConnection is "Server={SERVER_NAME};Database={DB_NAME};Integrated Security=SSPI;Trusted_Connection=True;" Why is it trying to login with NT AUTHORITY\ANONYMOUS LOGIN? I have to assume it's some setting or web.config entry specific to IIS7 since it worked fine before the migration. NOTE: The SQL Server is Windows authentication only - no mixed mode or SQL only.

    Read the article

  • Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

    - by Jay Michaud
    I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

    Read the article

  • Cannot connect to a VPN server - authentication failed with error code 691

    - by stacker
    When trying to connect to a VPN server, I get the 691 error code on the client, which say: Error Description: 691: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Now, I validated that the username and password are correct, and tried to login with domain name and without. I also installed a certification to use with the IKEv2 security type. I also validated that the VPN server support security method. But I cannot login. In the server log I get this log: Network Policy Server denied access to a user. The user DomainName\UserName connected from IP address but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Any idea of what can I do? Thanks in advance!

    Read the article

  • Can't Install php5-dev on Ubuntu 12.04 running OpenVZ

    - by MEsch
    I'm trying to fetch the php apc package using pecl and running into a problem that I believe may be caused by OpenVZ. To do so I need php5-dev. When I try to install it via apt-get, I get this: php5-dev : Depends: libssl-dev but it is not going to be installed Depends: libtool (>= 2.2) but it is not going to be installed As I try to manually install dependencies (without success), I believe I've identified libc6-dev as the culprit. libc6-dev : Depends: libc6 (= 2.15-0ubuntu10.2) but 2.15-0ubuntu10+openvz0 is to be installed I have libc6 installed on the system. If it's any help here is my sources.list: deb http://archive.ubuntu.com/ubuntu precise main restricted universe deb http://archive.ubuntu.com/ubuntu precise-updates main restricted universe deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner This is a very frustrating problem, as I have other instances of Ubuntu 12.04 running just fine elsewhere (though not on OpenVZ).

    Read the article

  • Why Is Volume Shadow Copy Services stopping?

    - by David Mackintosh
    I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

    Read the article

  • Keyloggers and Virtualization

    - by paranoid
    Whilst pondering about security, and setting up different VM for certain online activities deemed more risky or requiring extra security (banking, or visiting untrusted websites, etc), I came to think about how such a setup (different VMs for different uses) would defend me against a keylogger. So, two questions then: 1: If a keylogger has been installed inside a VM, can it capture data outside its own VM? 2: The opposite, does a keylogger in a host capture strokes typed within a VM residing in that host? My bet would be No and Yes respectively, but I really have no idea. Anyone else does?

    Read the article

  • Can't access shared drive when connecting over VPN

    - by evolvd
    I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

    Read the article

  • Good visuals supporting adopting Macintosh in a Windows company

    - by jdmuys
    I work in a Windows only software service company, which just put up an internal contest for innovative ideas for the company. The idea I submitted is to let employees use a Mac instead of the mandatory PC if they wished to. My idea has been selected (among a few others) to reach the next stage of the contest. One of the items requested for the next stage is ONE visual that best illustrates the idea. While my pitch is rather good (I think), I have a hard time coming up with ONE visual that would be suggestive enough and not too fanboy-ish, or too restricted. That's why I am requesting suggestions. For reference, some of the points I intend to develop are (not in order): de facto safety (little or no malware) Apple as a company reached its leading position through innovation (bio)diversity is a source of value for a service company, that expands its reach. it makes financial sense the Mac is the most compatible machine, making it a lot easier to test our software (especially web sites). Some OS X technologies can be valuable to a software service company (eg Applescript) Some Apple tools can help us improve (eg Keynote) It's good citizenship for our company as Apple is now best in class according to Greenpeace. I realize this question may be out of topic here. I'd be happy to have suggestions on where to post this question. Please do not argue why OS X might be better or worse than Windows. My question is very narrow. Thanks.

    Read the article

  • What's the best way to completely remove everything from a computer, without re-installing?

    - by Connor W
    I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

    Read the article

  • A network share folder is invisible to users

    - by Myrddin Emrys
    I have a network share folder that I was recently cleaning up permissions to. I took off the four individual names from the access permissions to the folder, and added a new security group (Universal) with standard Read/Write permissions to that folder, then added those 4 people to the group. However... now nobody can see the folder. The users can see the other 9 folders in that shared drive, but the 10th is missing. I cannot see any security permission in the parent folder or in the folder itself which would cause it to be invisible to anyone, regardless of whether they have permission to open it or edit files within.

    Read the article

  • Deny users in a certain group access to dovecot

    - by celil
    I installed the dovecot-imapd package in Ubuntu, and my setup is as follows: $ sudo dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-27-generic-pae i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock auth default: passdb: driver: pam userdb: driver: passwd For security reasons I would like to deny all users that are in the admin group ability to do imap login via dovecot. This is done in order to prevent a brute force attacker from discovering the admin passwords, and obtaining administrator privileges on the system. How can this be achieved? Presumably, I will have to modify some settings in /etc/dovecot/dovecot.conf, but I am hesitant to change the default settings lest I create other security vulnerabilities.

    Read the article

  • What settings need to be changed to allow EC2 instances to use Amazon's Route 53 for DNS?

    - by ks78
    I have a number of Amazon EC2 instances, all running Ubuntu, which I'd like to configure to use Amazon's Route 53. I setup a script, following Shlomo Swidler's article, but ran into script-related issues, which were answered here. Now, I have the script working, but my instances are still not able to access Route 53's DNS. By this I mean, they are not able to resolve hostnames to IP addresses. My instances are currently configured with the DNS server IP address Amazon pushes out to them by default, does that need to be changed when using Route 53? I'm also IP-restricting my instances using the Security Groups. Could that be the problem? Is there a certain IP address or port I should open to allow communication with Route 53? It seems that DNS requests should be originating from my instances so the Security Groups shouldn't be an issue, but I've been wrong before. If anyone has any ideas, I'd really appreciate it.

    Read the article

  • How can I print from my lion mac mini to my windows XP, with simple file sharing?

    - by Jules
    I have quite a complicated setup, perhaps. And a lot of history on this issue, I'm hoping that I don't have to buy a new printer. I've got a HP Wireless USB Print Server, which requires client software, I can't just use it as an IP Printer. The HP software is pretty poor on the mac and is no longer supported and often locks up the printer server and takes some considerable effort to actually print something. Let alone if a windows machine attaches to it first. My printer is an Epson Stylus R285. However, the windows client software is fine and we can print from windows 7 / XP without problem. We have simple file sharing setup as this is the only way I could get windows XP to talk to windows 7. However, I can't seem to get my mac mini to connect as anything other than a guest to my xp machine, to connect to the shared printer. I'm not considering some kind of internet printing as this would seems the simplest solution. But I'm not sure what will work with my setup ?

    Read the article

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >