Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 474/1178 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

• cPanel IPTables custom rules

  - by James Haigh

  Hi, I'm trying to allow a host access to port 3306 by IP. I've added the rule and ran an iptables-save and also service iptables save. These commands show as "OK" with no reported errors. And this works absolutely fine. Now, the server hasn't been restarted at all since I've been having this problem, but every day when I start developing on the server that needs mySQL access, it reports that the connection is refused. Back on the mySQL server, all I need to do is service iptables restart and everything then works as normal. The mySQL server is a CentOS cPanel VPS running on OpenVZ. Anyone know how I can make these rules persist? Is it something cPanel is doing overnight that is messing with my config? Thanks.

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• Why is my nginx alias not working?

  - by Rob

  I'm trying to set up an alias so when someone accesses /phpmyadmin/, nginx will pull it from /home/phpmyadmin/ rather than from the usual document root. However, everytime I pull up the URL, it gives me a 404 on all items not pulled through fastcgi. fastcgi seems to be working fine, whereas the rest is not. strace is telling me it's trying to pull everything else from the usual document root, yet I can't figure out why. Can anyone provide some insight? Here is the relevant part of my config: location ~ ^/phpmyadmin/(.+\.php)$ { include fcgi.conf; fastcgi_index index.php; fastcgi_pass unix:/tmp/php-cgi.sock; fastcgi_param SCRIPT_FILENAME /home$fastcgi_script_name; } location /phpmyadmin { alias /home/phpmyadmin/; }

  Read the article

• Excel Document Size is at 0KB, can't be opened

  - by Bassam

  After I saved an Excel document, I remembered that I needed to change something in it, so I go back to open it and it said Excel cannot open the file, because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file. I know when I saved before, around 2hours ago, it worked just fine. The document size is at 0KB now. How do I recover this document? Its crucial for my business!

  Read the article

• Unable to access my own websites from our home

  - by user2521866

  Not sure if this is the right place to ask, but i'm gonna have a shot at it. I host a couple of websites with a webhost in the Netherlands. For a couple of days now, i've been unable to connect to them from my home network. When using tracert in the cmd screen, i'm getting a timeout after about 4-5 hops. It seems fine accessing the website from anywhere, except my home network. Other PC's around the house also fail to open the websites. I've tried 'flushing my DNS' as seen in some other topics, but to no avail just yet. One of the websites: http://bit.ly/1hbqs4J I've contacted my host about it as well, but no response yet. Trying to take control of the situation myself now for as much as I can. Regards, Dave

  Read the article

• VMware Workstation 7 build 203739 - Capture Movie Mouse Pointer Not Visible

  - by BMIVM

  Hi, I have noticed that whenever I create a Capture Movie, the movie is fine but the mouse pointer is not visible at all. The clicks are on buttons file menus are executed but is hard for a viewer of the capturre movie session to follow the recording smoothly. This was not a problem in previous versions of WorkStation. Is this a bug or is there a setting I can set to see the mouse pointer? Note: VM Tools are installed, Host is Vista Ultimate Edtion SP1, x64 and the guest is a Win XP SP2. Thanks in advance for your help.

  Read the article

• How can I import a CSV file into an SQLite table that doesn't allow null values?

  - by Philip

  I've been using the SQLite Manager extension for Firefox to edit my Chrome web data file in order to restore my keyword searches, and I think I have everything in place except that when I import a CSV file into a table, (a) it won't import into the actual table because the table doesn't allow null values (b) if I import it into a new table that does allow null values, then all the empty strings end up as null and I have to manually edit the row, type and delete a character, and then it's set to empty string and it's fine So: is there either a way to import the CSV so that empty cells are automatically turned into empty strings instead of null, OR is there a way once a table is imported that has null values to convert it into one that doesn't allow null values, where each formerly null value is the empty string? Thanks!

  Read the article

• timeout duration on linux

  - by user1319451

  I'm trying to run a command for 5 hours and 10 minuts. I found out how to run it for 5 hours but I'm unable to run it for 5 hours and 10 minuts.. timeout -sKILL 5h mplayer -dumpstream http://82.201.100.23:80/slamfm -dumpfile slamfm.mp3 runs fine. But when I try timeout -sKILL 5h10m mplayer -dumpstream http://82.201.100.23:80/slamfm -dumpfile slamfm.mp3 I get this error timeout: invalid time interval `5h10m' Does anyone know a way to run this command for 5 hours and 10 minuts and then kill it?

  Read the article

• Cannot connect to FTP server from external host

  - by h3.

  I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected. But as soon the IP is external it won't connect.. I first assumed the port was blocked, but then: localserver:$ sudo tail -f /var/log/vsftpd.log Wed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4" remotemachine:$ netcat svn-motion.no-ip.biz 21 220 FTP Server And it hangs there. Do any ports other than 21 need to be open?

  Read the article

• Windows Server 2008 scheduled tasks cannot create files

  - by Nick Cartwright

  We have a series of tasks which, when run interactively over the command line run fine creating temporary files and (importantly) logs and backups. When we schedule the task with Administrator privileges to run at the highest priority, however, no logs or temporary files are created! All the directories have read/write privileges as administrator. Has anyone else experienced this?? We are running Windows 2008 Server & the job is configured for 'Windows Vista or Windows Server 2008'. Any help would be much appreciated! OK - so we installed Z-Cron and it works perfectly.... Still a really really strange error from Windows 2008 Task Scheduler, but a solution is perhaps not quite so urgent now we have Z-Cron working!

  Read the article

• Linux PHP web server horribly slow when accessed from any windows browser

  - by Ed Harcourt

  I have a Linux server (Ubuntu 10.04) running apache2 and PHP. Everything runs fine when accessing a page from any browser from another Linux machine or Mac. But when I try to access a page from any combination of Windows machine and browser I get about a 30 second delay before the page comes back. Accessing a plain old HTML file from the Windows browser runs lickity split. So it seems to be just PHP. MySQL is installed but a simple test page that uses no MySQL is still slow. I don't think it is DNS because if I hard code the IP address in the URL nothing changes. There doesn't seem to be anything in the log files that I can tell. What could be causing this behavior on Windows clients?

  Read the article

• Computer stopped working (ASUS P5GD1-VM)

  - by Gordonrjones

  My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

  Read the article

• Node.js installation on Debian 6

  - by pvorb

  I used to use this method for node.js installation on Debian, since it was easy and everything worked fine. Even with multiple users. Since version 0.6.18~dfsg1-1 of the sid package, installation removes openssh-server. But I need OpenSSH to connect to my server. Is there any possibility to install Node.js via APT or do I have to compile it manually? This is my APT preferences file: Package: * Pin: release a=stable Pin-Priority: 800 Package: * Pin: release a=testing Pin-Priority: 650 Package: * Pin: release a=unstable Pin-Priority: 600

  Read the article

• Do I have a bad SD card?

  - by User1

  I'm trying to copy data from my computer to an SD card. After a few hundred megs, I keep getting the following errors in dmesg: [34542.836192] end_request: I/O error, dev mmcblk0, sector 855936 [34542.836284] FAT: unable to read inode block for updating (i_pos 13694981) [34542.836306] MMC: killing requests for dead queue [34542.836310] end_request: I/O error, dev mmcblk0, sector 9280 [34542.837035] FAT: unable to read inode block for updating (i_pos 148486) [34542.837062] MMC: killing requests for dead queue [34542.837066] end_request: I/O error, dev mmcblk0, sector 1 [34542.837074] FAT: bread failed in fat_clusters_flush [34542.837085] MMC: killing requests for dead queue These were all files I copied from a smaller SD card. I just want to transfer them to my new, larger card for my phone. I tried the same experiment with different files on a different machine and the card failed again. Reading data from the old card went fine. My systems are older and the new SD card is new (16GB Class 4). Could this be that my computers are too old? Is there a definitive test to verify if my SD card is bad?

  Read the article

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• How to copy and paste code with retaining the format

  - by Sab

  This question may have been asked before but I was unable to find any solution. So here goes: When I browse and see some code that I would like to copy I simply use ctrl+c and ctrl+v. Most of the time this works fine. But in some cases (websites like stackoverflow and others ) when I copy the code and paste it , it only comes on one line in eclipse. I have tried pasting this code into eclipse and select all and hitting auto format but this doesnt help either. I have also pasted the code into komodo and word. But to no avail. The code simply refuses to align itself. Does anyone know any solution to this?

  Read the article

• RSS reader that supports multiple google accounts?

  - by Koen027

  I've been looking around for an RSS reader that can handle more than 1 google account? I have multiple gmail addresses for different things in life. I separate mails this way and also RSS feeds. This works fine on google reader, but i would like to have a desktop app that can handle multiple accounts, like Thunderbird can handle multiple mail accounts. All the desktop clients I've found so far ask you for 1 google account and that's where it ends. You can't add anymore.

  Read the article

• How can I organize my video collection and update meta data?

  - by Pieter Breed

  I have a large collection of downloaded video files containing different movies, tv shows and music videos. I have a FreeNAS box set up that uses Fuppes as a UPnP media server. My media player on Windows correctly detects this UPnP collection and can stream from it fine. However, All of my music videos, tv shows and movies are all sorted under the same 'Videos' group. I would like to seperate the different types of video files so that they can correctly go under 'Recorded TV' or whatever the case may be. Any ideas? I guess I am looking for something like an MP3Tagger but for video files?

  Read the article

• Shell Script to Start Mysql Server if not running

  - by user103373

  I have written a shell script to start mysql server & send a mail to admin user if it's restarted via shell script. What i am facing an issue if I run this shell script on terminal it's work perfectly & If same script runs via cronjob it's only sending the mail to the user & problem remains same. Is this problem relates to permission & how can i resolve it. Shell Script-------- #!/bin/bash EMAIL="[email protected]" SERVICE='mysql' if ps ax | grep -v grep | grep $SERVICE > /dev/null then echo "$SERVICE service running, everything is fine" else echo "$SERVICE is not running" /etc/init.d/mysql start cat <<EOF | msmtp -a gmail $EMAIL Subject: "Alert (Test Server) : Mysql Service is not running (Manually Restarted)" Mysql Server Restarted at: `date` EOF EXIT I am using msmtp for sending mail to the user on ubuntu 12.04 Server.

  Read the article

• How do I configure SSH on OS X?

  - by cwd

  I'm trying to SSH from one Mac running OS X 10.6 to another. Seems to work fine via a password, but I can't get it to use a RSA key instead. Where is the ssh configuration file on OS X and what is the command to reload SSH? Update What I'm asking is how to configured advanced options. For example, on Ubuntu there is a ssh config file at /etc/ssh/sshd_config and if you do something like change the port or disable password authentication for a particular user (PasswordAuthentication no) you need to run /etc/init.d/ssh reload to reload the config. I didn't see that file on OS X, so was just wondering where it was. I am aware of the ~/.ssh ~/.ssh/authorized_keys and `~/.ssh/config

  Read the article

• Windows server 2003SP2 as LDAP replica master for Mac OSX 10.6

  - by FrancoR

  Hello there, we have a single domain controller with Windows 2003 with few child. All the users are in the main DC. We have already created a connection from AD to Mac Xserve 10.6 and can read all the users, but: 1. If the DC goes down (or the net), Mac lose all the users, so no file access, no emails, no nothing. 2. the users are in read only. Mac admin cannot reset password, change attribute and so on. What we need is a stable environment where both AD admins and LDAP admins can manage the users; if one server goes offline the users of the other server should work (email, shared folders) just fine. Thanks in advance P.S. we already tried to connect the MacOSX to Windows LDAP, instead of AD, but we're unable to do it: MacOSX requires DNS IP (gotcha), user admin and password (ok) and a root LDAP password we're unable to find any reference of it in Windows 2003.

  Read the article

• Red Hat Kickstart: How do I Prevent partitioning?

  - by frio

  Hey all, I'm currently working on a new virtualisation setup using Xen, and Centos for my workplace. We intend to deploy the domUs into LVM volumes. Currently, the only thing preventing this from working as smoothly as we'd like is the Kickstart script's insistence on partitioning. This is the relevant part from our current KS template (which I've been messing with): # Partitioning clearpart --all --initlabel --drives=xvda part / --size=0 --grow --ondisk=xvda --fstype=ext3 This sets up a single partition and installs to it - which would be fine, but I'd prefer if there were no partitions, and installed directly to the existing LVM (so that we could then mount the LVM from the dom0 for backup and maintenance purposes). It's possible I'm doing something wrong, and should be exporting the volume as xvda1 rather than xvda - which I'm more than happy to amend - but I'm still not sure how I'd navigate the Kickstart! I'd really appreciate any help :). Cheers in advance!

  Read the article

• On Linux/Unix, does .tar.gz versus .zip matter?

  - by rwallace

  Cross-platform programs are sometimes distributed as .tar.gz for the Unix version and .zip for the Windows version. This makes sense when the contents of each must be different. If, however, the contents are going to be the same, it would be simpler to just have one download. Windows prefers .zip because that's the format it can handle out of the box. Does it matter on Unix? That is, I tried today unzipping a file on Ubuntu Linux, and it worked fine; is there any problem with this on any current Unix-like operating system, or is it okay to just provide a .zip file across the board?

  Read the article

• Can ping cannot be pinged

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can i solve this?

  Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >