Search Results

Search found 18174 results on 727 pages for 'eclipse plugin dev'.

Page 475/727 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

  • Why do I get Detached Entity exception when upgrading Spring Boot 1.1.4 to 1.1.5

    - by mmeany
    On updating Spring Boot from 1.1.4 to 1.1.5 a simple web application started generating detached entity exceptions. Specifically, a post authentication inteceptor that bumped number of visits was causing the problem. A quick check of loaded dependencies showed that Spring Data has been updated from 1.6.1 to 1.6.2 and a further check of the change log shows a couple of issues relating to optimistic locking, version fields and JPA issues that have been fixed. Well I am using a version field and it starts out as Null following recommendation to not set in the specification. I have produced a very simple test scenario where I get detached entity exceptions if the version field starts as null or zero. If I create an entity with version 1 however then I do not get these exceptions. Is this expected behaviour or is there still something amiss? Below is the test scenario I have for this condition. In the scenario the service layer that has been annotated @Transactional. Each test case makes multiple calls to the service layer - the tests are working with detached entities as this is the scenario I am working with in the full blown application. The test case comprises four tests: Test 1 - versionNullCausesAnExceptionOnUpdate() In this test the version field in the detached object is Null. This is how I would usually create the object prior to passing to the service. This test fails with a Detached Entity exception. I would have expected this test to pass. If there is a flaw in the test then the rest of the scenario is probably moot. Test 2 - versionZeroCausesExceptionOnUpdate() In this test I have set the version to value Long(0L). This is an edge case test and included because I found reference to Zero values being used for version field in the Spring Data change log. This test fails with a Detached Entity exception. Of interest simply because the following two tests pass leaving this as an anomaly. Test 3 - versionOneDoesNotCausesExceptionOnUpdate() In this test the version field is set to value Long(1L). Not something I would usually do, but considering the notes in the Spring Data change log I decided to give it a go. This test passes. Would not usually set the version field, but this looks like a work-around until I figure out why the first test is failing. Test 4 - versionOneDoesNotCausesExceptionWithMultipleUpdates() Encouraged by the result of test 3 I pushed the scenario a step further and perform multiple updates on the entity that started life with a version of Long(1L). This test passes. Reinforcement that this may be a useable work-around. The entity: package com.mvmlabs.domain; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; import javax.persistence.Table; import javax.persistence.Version; @Entity @Table(name="user_details") public class User { @Id @GeneratedValue(strategy=GenerationType.AUTO) private Long id; @Version private Long version; @Column(nullable = false, unique = true) private String username; @Column(nullable = false) private Integer numberOfVisits; public Long getId() { return id; } public void setId(Long id) { this.id = id; } public Long getVersion() { return version; } public void setVersion(Long version) { this.version = version; } public Integer getNumberOfVisits() { return numberOfVisits == null ? 0 : numberOfVisits; } public void setNumberOfVisits(Integer numberOfVisits) { this.numberOfVisits = numberOfVisits; } public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } } The repository: package com.mvmlabs.dao; import org.springframework.data.repository.CrudRepository; import com.mvmlabs.domain.User; public interface UserDao extends CrudRepository<User, Long>{ } The service interface: package com.mvmlabs.service; import com.mvmlabs.domain.User; public interface UserService { User save(User user); User loadUser(Long id); User registerVisit(User user); } The service implementation: package com.mvmlabs.service; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.stereotype.Service; import org.springframework.transaction.annotation.Propagation; import org.springframework.transaction.annotation.Transactional; import org.springframework.transaction.support.TransactionSynchronizationManager; import com.mvmlabs.dao.UserDao; import com.mvmlabs.domain.User; @Service @Transactional(propagation=Propagation.REQUIRED, readOnly=false) public class UserServiceJpaImpl implements UserService { @Autowired private UserDao userDao; @Transactional(readOnly=true) @Override public User loadUser(Long id) { return userDao.findOne(id); } @Override public User registerVisit(User user) { user.setNumberOfVisits(user.getNumberOfVisits() + 1); return userDao.save(user); } @Override public User save(User user) { return userDao.save(user); } } The application class: package com.mvmlabs; import org.springframework.boot.SpringApplication; import org.springframework.boot.autoconfigure.EnableAutoConfiguration; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; @Configuration @ComponentScan @EnableAutoConfiguration public class Application { public static void main(String[] args) { SpringApplication.run(Application.class, args); } } The POM: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mvmlabs</groupId> <artifactId>jpa-issue</artifactId> <version>0.0.1-SNAPSHOT</version> <packaging>jar</packaging> <name>spring-boot-jpa-issue</name> <description>JPA Issue between spring boot 1.1.4 and 1.1.5</description> <parent> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-parent</artifactId> <version>1.1.5.RELEASE</version> <relativePath /> <!-- lookup parent from repository --> </parent> <dependencies> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-data-jpa</artifactId> </dependency> <dependency> <groupId>org.hsqldb</groupId> <artifactId>hsqldb</artifactId> <scope>runtime</scope> </dependency> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-test</artifactId> <scope>test</scope> </dependency> </dependencies> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> <start-class>com.mvmlabs.Application</start-class> <java.version>1.7</java.version> </properties> <build> <plugins> <plugin> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-maven-plugin</artifactId> </plugin> </plugins> </build> </project> The application properties: spring.jpa.hibernate.ddl-auto: create spring.jpa.hibernate.naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy spring.jpa.database: HSQL spring.jpa.show-sql: true spring.datasource.url=jdbc:hsqldb:file:./target/testdb spring.datasource.username=sa spring.datasource.password= spring.datasource.driverClassName=org.hsqldb.jdbcDriver The test case: package com.mvmlabs; import org.junit.Assert; import org.junit.Test; import org.junit.runner.RunWith; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.boot.test.SpringApplicationConfiguration; import org.springframework.test.context.junit4.SpringJUnit4ClassRunner; import com.mvmlabs.domain.User; import com.mvmlabs.service.UserService; @RunWith(SpringJUnit4ClassRunner.class) @SpringApplicationConfiguration(classes = Application.class) public class ApplicationTests { @Autowired UserService userService; @Test public void versionNullCausesAnExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Null"); user.setNumberOfVisits(0); user.setVersion(null); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionZeroCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Zero"); user.setNumberOfVisits(0); user.setVersion(0L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version One"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(2L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionWithMultipleUpdates() throws Exception { User user = new User(); user.setUsername("Version One Multiple"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); user = userService.registerVisit(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(3), user.getNumberOfVisits()); Assert.assertEquals(new Long(4L), user.getVersion()); } } The first two tests fail with detached entity exception. The last two tests pass as expected. Now change Spring Boot version to 1.1.4 and rerun, all tests pass. Are my expectations wrong? Edit: This code saved to GitHub at https://github.com/mmeany/spring-boot-detached-entity-issue

    Read the article

  • [SC] DeleteService FAILED 1072

    - by Fuangwith S.
    Last time I create WAS profile and WASService then I try to config and run many script for learn how to config WAS, Finally it crash so i use wasprofile delete this profile and forgot delete WASService. Now I found IBM Webphere Application Server service display in services.msc list, so I tried to delete it with WASService.exe -remove command and windows SC command but I got message C:\Program Files\IBM\WebSphere\AppServer\bin>sc delete "IBMWAS61Service - DEV" [SC] DeleteService FAILED 1072: The specified service has been marked for deletion.

    Read the article

  • HTTP response time profiling

    - by Sparsh Gupta
    Hello I have a nginx reverse proxy. The server is close to serving 600-700 requests per second. I have a Munin HTTP load time plugin which is outputting this: http://monitor.wingify.com/munin/visualwebsiteoptimizer.com/lb1.visualwebsiteoptimizer.com-http_loadtime.html Now, the problem is I am seeing some spikes in the graph. Expected response times should always be under 200ms. I am keeping an eye on syslog and messages but I am unable to figure out the actual cause of this. I was wondering if there is any good HTTP response time profiling system which I can install / embed with this nginx server and get a detailed reports / logs on the breakup of time taken by different things and what exactly is the cause of the spikes. The profiling system would also help me understand bottlenecks and how can I further optimize the latency. Most important right now is to investigate the cause of the spikes in the HTTP load time graphs (similar pattern is reported by external monitors - Pingdom) and to fix it to get consistent response times Thanks

    Read the article

  • jQuery Validate - require at least one field in a group to be filled

    - by Nathan Long
    I'm using the excellent jQuery Validate Plugin to validate some forms. On one form, I need to ensure that the user fills in at least one of a group of fields. I think I've got a pretty good solution, and wanted to share it. Please suggest any improvements you can think of. Finding no built-in way to do this, I searched and found Rebecca Murphey's custom validation method, which was very helpful. I improved this in three ways: To let you pass in a selector for the group of fields To let you specify how many of that group must be filled for validation to pass To show all inputs in the group as passing validation as soon as one of them passes validation. So you can say "at least X inputs that match selector Y must be filled." The end result is a rule like this: partnumber: { require_from_group: [2,".productinfo"] } //The partnumber input will validate if //at least 2 `.productinfo` inputs are filled For best results, put this rule AFTER any formatting rules for that field (like "must contain only numbers", etc). This way, if the user gets an error from this rule and starts filling out one of the fields, they will get immediate feedback about the formatting required without having to fill another field first. Item #3 assumes that you're adding a class of .checked to your error messages upon successful validation. You can do this as follows, as demonstrated here. success: function(label) { label.html(" ").addClass("checked"); } As in the demo linked above, I use CSS to give each span.error an X image as its background, unless it has the class .checked, in which case it gets a check mark image. Here's my code so far: jQuery.validator.addMethod("require_from_group", function(value, element, options) { // From the options array, find out what selector matches // our group of inputs and how many of them should be filled. numberRequired = options[0]; selector = options[1]; var commonParent = $(element).parents('form'); var numberFilled = 0; commonParent.find(selector).each(function(){ // Look through fields matching our selector and total up // how many of them have been filled if ($(this).val()) { numberFilled++; } }); if (numberFilled >= numberRequired) { // This part is a bit of a hack - we make these // fields look like they've passed validation by // hiding their error messages, etc. Strictly speaking, // they haven't been re-validated, though, so it's possible // that we're hiding another validation problem. But there's // no way (that I know of) to trigger actual re-validation, // and in any case, any other errors will pop back up when // the user tries to submit the form. // If anyone knows a way to re-validate, please comment. // // For imputs matching our selector, remove error class // from their text. commonParent.find(selector).removeClass('error'); // Also look for inserted error messages and mark them // with class 'checked' var remainingErrors = commonParent.find(selector) .next('label.error').not('.checked'); remainingErrors.text("").addClass('checked'); // Tell the Validate plugin that this test passed return true; } // The {0} in the next line is the 0th item in the options array }, jQuery.format("Please fill out at least {0} of these fields.")); Questions? Comments?

    Read the article

  • How to add SQLite (SQLite.NET) to my C# project

    - by Lirik
    I followed the instructions in the documentation: Scenario 1: Version Independent (does not use the Global Assembly Cache) This method allows you to drop any new version of the System.Data.SQLite.DLL into your application's folder and use it without any code modifications or recompiling. Add the following code to your app.config file: <configuration> <system.data> <DbProviderFactories> <remove invariant="System.Data.SQLite"/> <add name="SQLite Data Provider" invariant="System.Data.SQLite" description=".Net Framework Data Provider for SQLite" type="System.Data.SQLite.SQLiteFactory, System.Data.SQLite" /> </DbProviderFactories> </system.data> </configuration> My app.config file now looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="DataFeed.DataFeedSettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" /> </sectionGroup> </configSections> <userSettings> <DataFeed.DataFeedSettings> <setting name="eodData" serializeAs="String"> <value>False</value> </setting> </DataFeed.DataFeedSettings> </userSettings> <system.data> <DbProviderFactories> <remove invariant="System.Data.SQLite"/> <add name="SQLite Data Provider" invariant="System.Data.SQLite" description=".Net Framework Data Provider for SQLite" type="System.Data.SQLite.SQLiteFactory, System.Data.SQLite" /> </DbProviderFactories> </system.data> </configuration> My project is called "DataFeed": using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Data.SQLite; //<-- Causes compiler error namespace DataFeed { class Program { static void Main(string[] args) { } } } The error I get is: .\dev\DataFeed\Program.cs(5,19): error CS0234: The type or namespace name 'SQLite' does not exist in the namespace 'System.Data' (are you missing an assembly reference?) I'm not using the GAC, I simply dropped the System.Data.SQLite.dll into my .\dev\DataFeed\ folder. I thought that all I needed to do is add the DLL to the project folder as it was mentioned in the documentation. Any hints on how to actually make this work?

    Read the article

  • "'0.offsetWidth' is null or not an object" - Coda Slider - Javascript Error Question

    - by bgadoci
    I implemented the Coda Slider tutorial successfully that is located here: http://jqueryfordesigners.com/coda-slider-effect/ The slider works great but I am getting a javascript error that I am not sure how to fix. The error says: '0.offsetWidth' is null or not an object coda-slider.js, line 19 character 3 Not sure how to fix it. Anyone have any ideas? Here is my js and css (don't think I need to upload the HTML but let me know if that helps). JS (coda-slider.js) // when the DOM is ready... $(document).ready(function () { var $panels = $('#slider .scrollContainer > div'); var $container = $('#slider .scrollContainer'); // if false, we'll float all the panels left and fix the width // of the container var horizontal = true; // float the panels left if we're going horizontal if (horizontal) { $panels.css({ 'float' : 'left', 'position' : 'relative' // IE fix to ensure overflow is hidden }); // calculate a new width for the container (so it holds all panels) $container.css('width', $panels[0].offsetWidth * $panels.length); <------line 19 } // collect the scroll object, at the same time apply the hidden overflow // to remove the default scrollbars that will appear var $scroll = $('#slider .scroll').css('overflow', 'hidden'); // apply our left + right buttons $scroll .before('<img class="scrollButtons left" src="/images/layout/navigation/scroll_left.png" />') .after('<img class="scrollButtons right" src="/images/layout/navigation/scroll_right.png" />'); // handle nav selection function selectNav() { $(this) .parents('ul:first') .find('a') .removeClass('selected') .end() .end() .addClass('selected'); } $('#slider .navigation').find('a').click(selectNav); // go find the navigation link that has this target and select the nav function trigger(data) { var el = $('#slider .navigation').find('a[href$="' + data.id + '"]').get(0); selectNav.call(el); } if (window.location.hash) { trigger({ id : window.location.hash.substr(1) }); } else { $('ul.navigation a:first').click(); } // offset is used to move to *exactly* the right place, since I'm using // padding on my example, I need to subtract the amount of padding to // the offset. Try removing this to get a good idea of the effect var offset = parseInt((horizontal ? $container.css('paddingTop') : $container.css('paddingLeft')) || 0) * -1; var scrollOptions = { target: $scroll, // the element that has the overflow // can be a selector which will be relative to the target items: $panels, navigation: '.navigation a', // selectors are NOT relative to document, i.e. make sure they're unique prev: 'img.left', next: 'img.right', // allow the scroll effect to run both directions axis: 'xy', onAfter: trigger, // our final callback offset: offset, // duration of the sliding effect duration: 500, // easing - can be used with the easing plugin: // http://gsgd.co.uk/sandbox/jquery/easing/ easing: 'swing' }; // apply serialScroll to the slider - we chose this plugin because it // supports// the indexed next and previous scroll along with hooking // in to our navigation. $('#slider').serialScroll(scrollOptions); // now apply localScroll to hook any other arbitrary links to trigger // the effect $.localScroll(scrollOptions); // finally, if the URL has a hash, move the slider in to position, // setting the duration to 1 because I don't want it to scroll in the // very first page load. We don't always need this, but it ensures // the positioning is absolutely spot on when the pages loads. scrollOptions.duration = 1; $.localScroll.hash(scrollOptions); }); CSS #slider { margin-left: 35px; position: relative; width: 875px; } .scroll { position: relative; width: 875px; height: 268px; overflow: auto; /* fix for IE to respect overflow */ background: #FFFFFF scroll 0; } .scrollContainer div.panel { position: relative; height: 210px; width: 875px; /* change to 560px if not using JS to remove rh.scroll */ } .scrollButtons { position: absolute; top: 115px; cursor: pointer; } .scrollButtons.left { left: -20px; } .scrollButtons.right { right: -20px; }

    Read the article

  • Standard Protection:Prevent IRC communication

    - by awe
    I have McAffee virusscan on my work computer, and every time I start up, I get 2 log entries like this: Blocked by port blocking rule C:\Program Files\Skype\Phone\Skype.exe Anti-virus Standard Protection:Prevent IRC communication The difference between the two, is that at the end there are 2 different IP addresses (which I don't recognise as belongs to us) with port :6667 on one and :6669 on the other. Although this is logged, Skype seems to work as expected; including talking, chatting and screen sharing (new feature in Skype 4.1). Anyone knows anything about what this is? EDIT: I also have a Skype certified plugin in Skype called Cucku Backup. I did not find anything in the documentation that Cucku is trying to access these ports through Skype, but it could be...? EDIT2: I did a search on the IP addresses in question on www.webyield.net, and resulted in the following: IP 71.251.72.173 (this one used port :6667): Host name: pool-71-251-72-173.tampfl.fios.verizon.net IP 79.87.54.165 (this one used port :6669): Host name: 165.54.87-79.rev.gaoland.net

    Read the article

  • linksys wrt54g router to a Cisco router?

    - by jasondavis
    This may be a strange question but I have no clue. I currently have a basic linksys wrt54g router fo9r my home network. I am considering getting a rack/cabinet and running a home server or 2 and hooking up my home network to it. If I were to do0 this I could pick up a cisco rack mounted router and switch off ebay to use. So If I were to do this, would I just plugin in the cables for the cisco router from my dsl modem or is there more to it to get these working?

    Read the article

  • MSBuild Community Tasks can't see msbuild in cmd

    - by phenevo
    Hi, I have winforms project app.config: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="MyClient.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <applicationSettings> <MyClient.Properties.Settings> <setting name="MyClient_MyService_MyService" serializeAs="String"> <value>SomeUniqueKeyWithAGoodName/server/myService.asmx</value> </setting> </MyClient.Properties.Settings> </applicationSettings> </configuration> customized.targets: <Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <BuildEnvironment>DEV</BuildEnvironment> </PropertyGroup> <Choose> <When Condition=" '$(BuildEnvironment)' == 'DEV' "> <PropertyGroup> <BaseUrlWebServices>http://tools.productionServer.pl</BaseUrlWebServices> <PublishDir>C:\Documents and Settings\myName\Desktop\Project\TestMsBuild\</PublishDir> </PropertyGroup> </When> <When Condition=" '$(BuildEnvironment)' == 'QA' "> <PropertyGroup> <BaseUrlWebServices>http://tools.testServer.pl</BaseUrlWebServices> <PublishDir>C:\Documents and Settings\myName\Desktop\Project\TestMsBuild2\</PublishDir> </PropertyGroup> </When> </Choose> </Project> and publishQA.bat (this file is in directory of project) @ECHO OFF msbuild /t:Publish /p:Configuration=Release /p:BuildEnvironment=QA /p:ApplicationVersion=1.2.3.5 pause When I'm running this bat I get error in cmd: @@echo is not recognised... When I'm starting project it's ok, but when I'm lauch try to use any method from webservice I got error about wrong URI. Good uri for QA is : http://tools.testServer.pl/server/myService.asmx Any ideas ?

    Read the article

  • Firefox Furigana Injector on Debian

    - by Ken
    I'm using Iceweasel (un/rebranded Firefox) 3.5.9 on Debian (amd64). I want to use the "Furigana Injector" plugin. I installed it via the Tools - Add-ons menuitem (version 1.3), and restarted Firefox. Unfortunately, when I click the button, it only says: "The 'SimpleMecab' XPCOM component could not be loaded." in a dialog box, several dozen times (!). I found a Debian package "libmecab1", but installing it didn't help. Is there some "mecab" package I can install that will make this work?

    Read the article

  • ActiveDirectoryMembershipProvider and ADAM (or AD LDS) and SetPassword

    - by Iulian
    By the subject line it seems to be a rather broad subject and I need some help here. Basically what I want is to use ActiveDirectoryMembershipProvider with an ADAM instance to authenticate users in an ASP.NET web application. My development environment is a windows 7 machine with an AD LDS instance on it whilst the QA server is a Windows 2003 server with an ADAM instance on it. I have all the required users on both instances plus one with adminsitrator role (CN=Admin,CN=xxx,DC=xxx,C=xx) which I want to use as the connection user. Using connectonProtecton="None" connectionUsername="CN=Admin,CN=xxx,DC=xxx,C=xx" connectionPassword="xxx" I am able to authenticate on both environments (dev & qa). If I change to the connectionProtection to "Secure" I am not able to authenticate anymore; the error I get is "Parser Error Message: Unable to establish secure connection with the server" To me it sounds wrong to use connectionProtection="None" although I found on the net a lot of samples using this setting. Can I use connectionProtection="Secure" to connect to an ADAM instance using an account defined on that instance having Administrator role? What other choices do I have (like using an domain account)? What if my machine where I am to deploy the application is not a part of the domain, will this affect in any way the behavior? I am novice in the respect so I would really appreciate some clear answers or some directions as where to look? Now beside the "signing in" feature of the ActiveDirectoryMembershipProvider I also want to add an extra one, which is setting the password without knowing the old one (something that will be used by a "reset password" feature). So I added a couple of extension methods to the provider, and used System.DirectoryServices classes like DirectoryEntry and the like. When creating a directory entry I use the same credentials provided in web.config for the provider minus the AuthenticationType as I don't know what is right combination of the flags that corresponds to None/Secure. I am able to use Invoke "SetPassword" with ADS_OPTION_PASSWORD_METHOD option as ADS_PASSWORD_ENCODE_CLEAR on my dev machine (w/ AD LDS instance); nevertheless on qa environment (w/ ADAM instance) I am getting an error like "Exception Details: System.DirectoryServices.DirectoryServicesCOMException: An operations error occurred. (Exception from HRESULT: 0x80072020)" I am quite sure it is not about AD LDS vs ADAM but probably another configuration / permission issue. So can anyone help me with some hints on how to use this SetPassword feature? And as a general question what are the best practices when it comes to using ADAM regarding security, programming etc? Thanks in advance Iulian

    Read the article

  • Live video streaming: Microsoft or Adobe ?

    - by Kedare
    Hello, I am looking for a Live Video Streaming solution, The clients will be able to watch the video with a plugin (Flash or Silverlight), or a Standalone application (Windows Media Player, FLV, etc). But I can't choose between Microsoft Solution (Windows Media Server (MMS, RTSP) + Silverlight as client) or the Adobe solution (Flash Media Server (RTMP) + Flash/Flex). The streaming is for short duration cast and will not be online 24/24h. I tried both, and I found the cheaper version of FMS don't provide security to prevent users to register as published (You have to write custom module...), the Windows Media Server provide this function. We already have Windows Server licences. (So Windows Media Server will be "Free") What do you recommend ? What is the best between Flash or Silverlight for Live Video Streaming ? Thank you !

    Read the article

  • WPF Animation FPS vs. CPU usage - Am I expecting too much?

    - by Cory Charlton
    Working on a screen saver for my wife, http://cchearts.codeplex.com/, and while I've been able to improve FPS on lower end machines (switch from Path to StreamGeometry, use DrawingVisual instead of UserControl, etc) the CPU usage still seems very high. Here's some numbers I ran from a few 5 minute sampling periods: ~60FPS 35% average CPU on Core 2 Duo T7500 @ 2.2GHz, 3GB ram, NVIDIA Quadro NVS 140M (128MB), Vista [My dev laptop] ~40FPS 50% average CPU on Pentium D @ 3.4GHz, 1.5GB ram, Standard VGA Graphics Adapter (unknown), 2003 Server [A crappy desktop] I can understand the lower frame rate and higher CPU usage on the crappy desktop but it still seems pretty high and 35% on my dev laptop seems high as well. I'd really like to analyze the application to get more details but I'm having issues there as well so I'm wondering if I'm doing something wrong (never profiled WPF before). WPF Performance Suite: Process Launch Error Unable to attach to process: CCHearts.exe Do you want to kill it? This error message occurs when I click cancel after attempting launch. If I don't click cancel it sits there idle, I guess waiting to attach. Performance Explorer: Could not launch C:\Projects2\CC.Hearts\CC.Hearts\bin\Debug (USEVISUAL)\CCHearts.exe. Previous attempt to profile the application finished unsuccessfully. Please restart the application. Output Window from Performance: Profiling started. Profiling process ID 5360 (CCHearts). Process ID 5360 has exited. Data written to C:\Projects2\CC.Hearts\CCHearts100608.vsp. Profiling finished. PRF0025: No data was collected. Profiling complete. So I'm stuck wanting to improve performance but have no concrete way to determine where the bottleneck is. Have been relatively successful throwing darts at this point but I'm beyond that now :) PS: Screensaver is hosted at CodePlex if you want to look at the source and missed the link above. Edit: My RenderOptions darts... // NOTE: Grasping at straws here ;-) RenderOptions.SetBitmapScalingMode(newHeart, BitmapScalingMode.LowQuality); RenderOptions.SetCachingHint(newHeart, CachingHint.Cache); RenderOptions.SetEdgeMode(newHeart, EdgeMode.Aliased); I threw those a little while back and didn't see much difference (not sure if the bitmap scaling even comes into play). Really wish I could get profiling working to know where I should try to optimize. For now I assume there is some overhead in creating a new HeartVisual and the DrawingVisual contained inside. Maybe if I reset and reused the hearts (tossed them in a queue once they completed or something) I'd see an improvement. Shrug Throwing darts while blindfolder is always fun.

    Read the article

  • Nagios "CRITICAL - Socket timeout after 10 seconds" problems with service and host Checks.

    - by Kristiaan
    Hi Everyone, got a little bit of a problem with a Nagios system we are using in our office, which has only recently started appearing. what i would like to know really is the best solution to resolve this problem as ive done a bit of reading on it and there seems to be lots of different ways to solve it.. basically at random points throughout the day and on random hosts / services we will get a Critical warning flagged up that something is not behaving as it should, when we investigate 9 times out of 10 we end up with this as an error message. "SERVICE ALERT: SERVERNAME ;NSClient++ Version;CRITICAL;SOFT;1;CRITICAL - Socket timeout after 10 seconds" indicating the service or host has timed out, where do i go about setting the timeouts so this stops ? ive read that some of the plugin timesouts are as low as 10 seconds... thanks Kris

    Read the article

  • Firefox 4, 5 hang on Windows XP

    - by FarmBoy
    I've been having a lot of trouble with Firefox 4 and 5 hanging on my Windows XP machine. I've often found a temporary solution of uninstalling and reinstalling. Recently I deleted my Firefox profile to get a clean start. But nothing seems a reliable solution. The only plugin that I have is Firebug. My machine is a bit low on RAM, with only 2 GB. Am I missing something? Any troubleshooting steps that you would recommend? I've come to expect Firefox to be very stable, and that has not at all been my experience lately.

    Read the article

  • Error 2013: Lost connection to MySQL server during query when executing CHECK TABLE FOR UPGRADE

    - by Dean Richardson
    I just upgraded Ubuntu from 11.10 to 12.04. My rails app now returns the (passenger) error "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) (Mysql2::Error)". I get a similar error when I try to access mysql at the command line on my Ubuntu server using mysql -u root -p. I have mysql-server 5.5 installed. I've checked and mysql is not running. When I try to restart it, it fails. Here are some key lines from the tail of /var/log/syslog after an attempted restart: dean@dgwjasonfried:/etc/mysql$ tail -f /var/log/syslog Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: /usr/bin/mysqlcheck: Got error: 2013: Lost connection to MySQL server during query when executing 'CHECK TABLE ... FOR UPGRADE' Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: FATAL ERROR: Upgrade failed Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: molex_app_development.assets OK Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5107]: molex_app_development.ecd_types OK Mar 7 08:55:27 dgwjasonfried /etc/mysql/debian-start[5124]: Checking for insecure root accounts. Mar 7 08:55:27 dgwjasonfried kernel: [ 7551.769657] init: mysql main process (5064) terminated with status 1 Mar 7 08:55:27 dgwjasonfried kernel: [ 7551.769697] init: mysql respawning too fast, stopped Here is most of /etc/mysql/my.cnf: Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock Here is entries for some specific programs The following values assume you have at least 32M ram This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] Basic Settings user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking Instead of skip-networking the default is now to listen only on localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 And here are permissions for var/run/mysqld/mysqld.sock: srwxrwxrwx 1 mysql mysql 0 Mar 7 09:18 mysqld.sock I'd be grateful for any suggestions the community might have. I reviewed the related questions here and attempted some of the fixes offered but to no avail. Thanks! Dean Richardson Update: Thanks to quanta's suggestion, I looked at the /var/log/mysql/error.log file. I found error messages relating to pointers, fatal signals, and more stuff that I really couldn't make much sense of. I also found mysql man page references, however. One suggested that I try starting mysqld with the --innodb_force_recovery=# option, then attempt to dump (or drop) the offending/corrupted database or table. I worked through the escalating option levels one-by-one (innodb_force_recovery=1, innodb_force_recovery=2, etc.) This allowed me to successfully run mysql -u root -p from the command line and execute several commands. I was able to run queries on my production database, but any attempt to query, dump, or even drop my development database raised an error and led to me losing the connection to mysql. So I've made progress, but until I'm somehow able to drop or repair my development db I'm still unable to get my app to load. Any further advice or suggestions? Thanks! Dean Update: Right after running sudo mysqld --innodb_force_recover=1 from the command line, the error.log contains this: Right after retrying sudo mysqld --innodb_force_recover=1, The error.log file shows this: 130308 4:55:39 [Note] Plugin 'FEDERATED' is disabled. 130308 4:55:39 InnoDB: The InnoDB memory heap is disabled 130308 4:55:39 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130308 4:55:39 InnoDB: Compressed tables use zlib 1.2.3.4 130308 4:55:39 InnoDB: Initializing buffer pool, size = 128.0M 130308 4:55:39 InnoDB: Completed initialization of buffer pool 130308 4:55:39 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130308 4:55:39 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130308 4:55:40 InnoDB: Waiting for the background threads to start 130308 4:55:41 InnoDB: 1.1.8 started; log sequence number 10259220 130308 4:55:41 InnoDB: !!! innodb_force_recovery is set to 1 !!! 130308 4:55:41 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130308 4:55:41 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130308 4:55:41 [Note] Server socket created on IP: '127.0.0.1'. 130308 4:55:41 [Note] Event Scheduler: Loaded 0 events 130308 4:55:41 [Note] mysqld: ready for connections. Version: '5.5.29-0ubuntu0.12.04.2' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) Then after mysql -u root -p and mysql> drop database molex_app_development; ERROR 2013 (HY000): Lost connection to MySQL server during query mysql> the error.log contains: dean@dgwjasonfried:/var/log/mysql$ tail -f error.log /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f6a3ff9ecbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6a1c004bd8): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 130308 4:55:39 [Note] Plugin 'FEDERATED' is disabled. 130308 4:55:39 InnoDB: The InnoDB memory heap is disabled 130308 4:55:39 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130308 4:55:39 InnoDB: Compressed tables use zlib 1.2.3.4 130308 4:55:39 InnoDB: Initializing buffer pool, size = 128.0M 130308 4:55:39 InnoDB: Completed initialization of buffer pool 130308 4:55:39 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130308 4:55:39 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130308 4:55:40 InnoDB: Waiting for the background threads to start 130308 4:55:41 InnoDB: 1.1.8 started; log sequence number 10259220 130308 4:55:41 InnoDB: !!! innodb_force_recovery is set to 1 !!! 130308 4:55:41 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130308 4:55:41 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130308 4:55:41 [Note] Server socket created on IP: '127.0.0.1'. 130308 4:55:41 [Note] Event Scheduler: Loaded 0 events 130308 4:55:41 [Note] mysqld: ready for connections. Version: '5.5.29-0ubuntu0.12.04.2' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 130308 4:58:23 [ERROR] Incorrect definition of table mysql.proc: expected column 'comment' at position 15 to have type text, found type char(64). 130308 4:58:23 InnoDB: Assertion failure in thread 140168992810752 in file fsp0fsp.c line 3639 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 10:58:23 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346681 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f7ba4f6c2f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f7ba3065e60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f7ba3609039] mysqld(handle_fatal_signal+0x483)[0x7f7ba34cf9c3] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f7ba2220cb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f7ba188c425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f7ba188fb8b] mysqld(+0x65e0fc)[0x7f7ba37160fc] mysqld(+0x602be6)[0x7f7ba36babe6] mysqld(+0x635006)[0x7f7ba36ed006] mysqld(+0x5d7072)[0x7f7ba368f072] mysqld(+0x5d7b9c)[0x7f7ba368fb9c] mysqld(+0x6a3348)[0x7f7ba375b348] mysqld(+0x6a3887)[0x7f7ba375b887] mysqld(+0x5c6a86)[0x7f7ba367ea86] mysqld(+0x5ae3a7)[0x7f7ba36663a7] mysqld(_Z15ha_delete_tableP3THDP10handlertonPKcS4_S4_b+0x16d)[0x7f7ba34d3ffd] mysqld(_Z23mysql_rm_table_no_locksP3THDP10TABLE_LISTbbbb+0x568)[0x7f7ba3417f78] mysqld(_Z11mysql_rm_dbP3THDPcbb+0x8aa)[0x7f7ba339780a] mysqld(_Z21mysql_execute_commandP3THD+0x394c)[0x7f7ba33b886c] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f7ba33bb28f] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1380)[0x7f7ba33bc6e0] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f7ba346119d] mysqld(handle_one_connection+0x50)[0x7f7ba3461200] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f7ba2218e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f7ba1949cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f7b7c004b60): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. --Dean

    Read the article

  • Asterisk - Trying to use call files to create a conference call between two dynamic numbers

    - by Hank
    I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

    Read the article

  • How is htop "Swp" calculated?

    - by Thomas
    When I run htop (on OS X 10.6.8), I see something like this : 1 [||||||| 20.0%] Tasks: 70 total, 0 running 2 [||| 7.2%] Load average: 1.11 0.79 0.64 3 [|||||||||||||||||||||||||||81.3%] Uptime: 00:30:42 4 [|| 5.8%] Mem[|||||||||||||||||||||3872/4096MB] Swp[ 0/0MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 284 501 57 0 15.3G 1064M 0 S 0.0 6.5 0:01.26 /Applications/Firefox.app/Contents/MacOS/firefox -psn_0_90134 437 501 57 0 14.8G 785M 0 S 0.0 4.8 0:00.18 /Applications/Thunderbird.app/Contents/MacOS/thunderbird -psn_0_114716 428 501 63 0 12.8G 351M 0 S 1.0 2.1 0:00.51 /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/ 696 501 63 0 11.7G 175M 0 S 0.0 1.1 0:00.02 /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Conte 38 0 33 0 11.1G 422M 0 S 0.0 2.6 0:00.59 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framewo 183 501 48 0 10.9G 137M 0 S 0.0 0.8 0:00.03 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder How can I have Processes using Gigabytes of VIRT memory and still 0MB of Swap used ?

    Read the article

  • ASP.NET client to stateful java webservice client (metro)

    - by hubertg
    Hi I have a webservice with the following annotations: @WebService @HttpSessionScope @Stateful @Addressing Now I created a ASP.NET (c#) client for this webservice, but when I call a method the following error is returned: This is a stateful web service and {http://jax-ws.dev.java.net/xml/ns/}objectId header is required. How can I tell ASP.net to switch to stateful mode? Is this possible at all? Thanks any advice/examples.

    Read the article

  • No Business Data Connectivity Service associated with current web context error

    - by Rob
    I am running on a new dev setup for SharePoint 2010 and trying to setup some External Content types. I think that I have setup BCS correctly (since I see it running in the central administration). When I go into SharePoint designer 2010 and try to setup a new External Content Type, I get the following error: "There is no Business Connectivity Service associated with the current web context." Am I missing something with the configuration or why am I not able to setup a new External Content Type to point to my existing SQL database

    Read the article

  • Microsoft Outlook hangs when switching input language

    - by Hugo
    Hello, I have two keyboard languages, Swedish and Amerikan English. Normally, I switch language by hitting [alt]+[shift] and it works like a charm. However, suddenly Microsoft Outlook has started to hang whenever I try to switch keyboard input language. Whenever i hit [alt]+[shift] or use the menu to switch language Outlook will hang indefinitely not responding. Why? and what can I do about it? I have English Windows 2000 and Outlook 2003 with the Google Search Desktop plugin.

    Read the article

  • CSS3 - Validator - RGBA wrong?

    - by poru
    I'm using the W3C CSS Validator with the Profile CSS3 but the validator says that my CSS rgba()'s are wrong. I looked up the Color Module Level 3, and the syntax is the same as mine. I also tried the Dev-Validator, same result. Example input: div.class { border: 1px solid rgba(0, 0, 0, 0.5); } Am I wrong or why does the validator say that I have that many mistakes with rgba?

    Read the article

  • Coldfusion popularity

    - by jrharshath
    Hi, I've heard of Coldfusion being a server side technology for web app dev. Are there any statistics as to how widely it is used as opposed to PHP, Java Servlets and JSP or ASP.NET? Are there any special features in coldfusion that make learning it worth the while? Thanks, jrh PS: please don't close this question as argumentative. I'm looking for statistics and real answers. Thanks for understanding.

    Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >