Search Results

Search found 30804 results on 1233 pages for 'hardware test'.

Page 476/1233 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

  • Canon LIDE 30 scanner with Windows 7 x64

    - by marc_s
    Has anyone gotten any of those older LIDE scanners (models 20, 30, 35 etc.) to work on Win7 x64?? I've tried several things, like grabbing the LIDE 60 driver for Vista64, but nothing has worked so far.... Any ideas? Doesn't look like Canon wants to support its "more-than-six-months-old" own hardware.... disappointing, really.

    Read the article

  • XP OEM licensing when reinstalling Windows XP

    - by mindas
    My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

    Read the article

  • Nginx + uWSGI + Django performance stuck on 100rq/s

    - by dancio
    I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

    Read the article

  • Where can I buy a good rackmount workstation?

    - by yan bellavance
    We have a product which consists of a GUI program and all the hardware goes in a rack. Our department bought a rackmount server for the first unit, but I dont think this is adequate for applications that use graphics (correct me if I'm wrong - we bought a Dell R710). Could you tell me of a good rackmount workstation we could buy for our product? Also, would it be risky for us to build our own rackmount?

    Read the article

  • CSS gradient not rendering in Windows Phone 8 WebBrowser Control

    - by SRSHawk
    I am facing an issue where, the CSS3 background is not rendered in WebBrowser control in Windows Phone 8. But same HTML when opened in WebBrowser in Windows Phone 8, it renders the gradient The HTML I am using is: <html> <head> <meta name="viewport" content="width=320, user-scalable=no, minimum-scale=1, maximum-scale=1"/> </head> <body style="margin:0px;overflow:hidden;"> <div id="im_c" style="height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);"> <div style="margin:0 auto;width:320px;"> Test </div> </div> <style> body {margin:0px} </style> </body> In Windows Phone 8, I use the HTML as below: WebBroswer WebView = new WebBrowser(); WebView.Height = 100; WebView.Width = 400; WebView.NavigateToString(@"<html><head><meta name=""viewport"" content=""width=320, user-scalable=no, minimum-scale=1, maximum-scale=1""/></head><body style=""margin:0px;overflow:hidden;""> <div id=""im_c"" style=""height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);""> <div style=""margin:0 auto;width:320px;"">Test</div></div> <style> body {margin:0px} </style> </body></html>"); In this case, the CSS gradient is not visible. Am I missing something?

    Read the article

  • Abnormal hangs and restarts Ubuntu 8.04

    - by jai-ho
    Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

    Read the article

  • Can't seem to get python to work

    - by Justin Johnson
    I'm just starting out in Python. The Python interpreter works from the command line (I have 2.4.3), but I can't seem to get Apache to execute Python scripts. All I end up with is a blank screen and nothing in the Apache error logs. I enabled Python via the Plesk control panel. Here's the snippet that was generated in the httpd.include: <Files ~ (\.py$)> SetHandler python-program PythonHandler mod_python.cgihandler </Files> My test script is one of the examples that comes with the Python downloads at http://python.org/download/ #!/usr/local/bin/python """CGI test 1 - check server setup.""" # Until you get this to work, your web server isn't set up right or # your Python isn't set up right. # If cgi0.sh works but cgi1.py doesn't, check the #! line and the file # permissions. The docs for the cgi.py module have debugging tips. print("Content-type: text/html") print() print("<h1>Hello world</h1>") print("<p>This is cgi1.py") That wasn't working, so I changed #!/usr/local/bin/python to #!/usr/bin/python which is what which python tells me but the results were the same. Like I said, I'm ending up with a blank page. No errors that I know of, unless I'm checking the wrong error log (I'm checking the Apache error log). I'm on a MediaTemple (dv) running CentOS.

    Read the article

  • PsExec and Remote Environment Variables, Logging, Etc.

    - by alharaka
    When I run PsExec on a remote computer, I always fall short of what I want. What I would like ideally in most situations is a) a log on an admin server where each individual log has the name of each the remote computer it was generated from (e.g. COMPNAME1.log, COMPNAME2.log, etc.) or b) a log file on each remote computer with whatever name I specify. When I try scenario (a), I use the following command. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username cmd /c echo TEST >> \\server.company.tld\share\%computername%.log Problem is that it never works. All the computers just write to the log where %computername% is just the computer I execute PsExec from in my office. What I want are unique logs for each computer specific in the listofcomputers.txt that will correctly use the hostname from the remote environment variable without issue. Is that even possible? It does not seem to work for me. I tried this, and the syntax is clearly wrong. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo TEST >> \\server.company.tld\share\%computername%.log" PsExec just fails saying the system file cannot be found (read: syntax fail). As for scenario (b), it appears to be a variation of a similar problem. When I run a command like this, it does not work. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo %computername% >> \\server.company.tld\share\aggregated.log" Is there something I do not understand about remote path and environment variables with PsExec on the cmd.exe console (I have not even tried the dreaded PowerShell yet). I know such things work in a batch file (cmd /c \\server.company.tld\share\runthis.bat), but is there a reason it will not work when executing commands as arguments? I always need this, and can never get it!

    Read the article

  • installing mac os on intel [closed]

    - by bassha
    Possible Duplicate: Installing Mac OS X on Non Apple Hardware hello i have an intel based computer, it's hp pavillion dv6000, it's cpu is 1.6ghz duocore and has 1GB of ram. i installed the mac os x leopard for intel on it, on a 12GB partition, but it's not working. i can boot to the mac and the os display a picture and a welcoming song then it stop doing anything. does the mac os x need a special intel requirements?

    Read the article

  • Improving abysmal 802.11n wireless network

    - by concept
    I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

    Read the article

  • Perl EPIC Not recognising installed CPAN modules

    - by Recc
    Eclipse on a mac, was working fine adding new modules until I Installed Text::CSV_XS which Eclips doesn't recognise as added to @INC For instance use strict; use SOAP::Transport::HTTP; SOAP::Transport::HTTP::CGI->dispatch_to('C2FService')->handle; BEGIN { package C2FService; use vars qw(@ISA); @ISA = qw(Exporter SOAP::Server::Parameters); use SOAP::Lite; sub c2f { my $self = shift; my $envelope = pop; my $temp = $envelope->dataof("//c2f/temperature"); return SOAP::Data->name( 'convertedTemp' => ( ( ( 9 / 5 ) * ( $temp->value ) ) + 32 ) ); } } use SOAP::Transport::HTTP; is marked as error if I comment it out use SOAP::Lite; is in turn marked as an error, not found etc the usual if a module is not installed. Both are installed with CPAN and $ perl -c soap-test.pl post-code-check.pl syntax OK Perl is fine CPAN tests are all pass, the code works, only EPIC lags behind. $ pwd && ls /opt/local/lib/perl5/site_perl/5.12.4/SOAP Client.pod Lite Server.pod Constants.pm Lite.pm Test.pm Data.pod Packager.pm Trace.pod Deserializer.pod SOM.pod Transport Fault.pod Schema.pod Transport.pod Header.pod Serializer.pod Utils.pod And if I have use errors in the start of my files the rest of the source is not error checked..

    Read the article

  • Why does "commit" appear in the mysql slow query log?

    - by Tom
    In our MySQL slow query logs I often see lines that just say "COMMIT". What causes a commit to take time? Another way to ask this question is: "How can I reproduce getting a slow commit; statement with some test queries?" From my investigation so far I have found that if there is a slow query within a transaction, then it is the slow query that gets output into the slow log, not the commit itself. Testing In mysql command line client: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=benchmark(9999999, md5('This is to slow down the update')) WHERE id = 21560; Query OK, 0 rows affected (2.32 sec) Rows matched: 1 Changed: 0 Warnings: 0 At this point (before the commit) the UPDATE is already in the slow log. mysql commit; Query OK, 0 rows affected (0.01 sec) The commit happens fast, it never appeared in the slow log. I also tried a UPDATE which changes a large amount of data but again it was the UPDATE that was slow not the COMMIT. However, I can reproduce a slow ROLLBACK that takes 46s and gets output to the slow log: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=CONCAT(myfield,'TEST'); Query OK, 481446 rows affected (53.31 sec) Rows matched: 481446 Changed: 481446 Warnings: 0 mysql rollback; Query OK, 0 rows affected (46.09 sec) I understand why rollback has a lot of work to do and therefore takes some time. But I'm still struggling to understand the COMMIT situation - i.e. why it might take a while.

    Read the article

  • tail -f and then exit on matching string

    - by Patrick
    I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

    Read the article

  • CPU, Memory, Network, IO resources are under utilized when I tried various JMeter load testing

    - by Jaiganesh
    CPU, Memory, Network, IO resources are under utilized when I tried various JMeter load testing. I have given below the details. Hardware: 1 Core with 2 GB RAM OS: Ubuntu 12.04 LTS Server Edition Application: PHP (using JQuery, Ajax) JMeter Parameters: 10, 20, 30, 40 Hits per minute 220 Test Cases per hit 2.03 MB per hit I am not clear, why these resources are under utilized. Please help me to resolve this.

    Read the article

  • Common and maximum number of virtual machines per server?

    - by Rabarberski
    For a project I am trying to get real-life estimates for the number of virtual machines per server, both typically and maximally. Of course, the maximum number of VMs would be depending on the type of applications (disk intensive, network intensive, ...), and server hardware (like number of cores, memory, ...), but still it would be useful to know if a typical maximum is about 10, 20 or 30 VMs per server. Can anybody give practical numbers?

    Read the article

  • Bare-Metal Restores of Linux Servers with Tivoli

    - by Chad P
    We currently use IBM Tivoli to back up our Linux servers and we are looking for suggestions on the best way to restore to bare metal. I've read IBM's doc on this issue. Is that still relevant or is there a better way? Also, how do you handle testing a restore to a vm or another piece of hardware on the same network that the original server lives?

    Read the article

  • Ubuntu Keyboard response speed problem.

    - by Asaf
    Hello, I have Ubuntu Lucid Lynx installed, Using Gnome 2.30.0 I'm using a Laptop, HP Pavilion dv9000 I've stumbled on responsiveness issues with my keyboard, Sometimes it's really obvious - the keyboard doesn't respond fast enough to my typing. Checked sticky keys and all that, it's all disabled of course. Now, I also checked on Windows to see if the problem is Hardware or something, and there are no responsiveness issues there... I'm thinking it's Gnome (or the X). Thanks.

    Read the article

  • Emails sent to outlook.com not being delivered

    - by imukcedup
    I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

    Read the article

  • How to make Linux reliably boot on multi-cpu machines?

    - by Adam Tabi
    I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

    Read the article

  • libstdc++ - compiling failing because of tr1/regex

    - by Radek Šimko
    I have these packages installed on my OpenSUSE 11.3: i | libstdc++45 | Standard shared library for C++ | package i | libstdc++45-devel | Contains files and libraries for development | package But when i'm trying to compile this C++ code: #include <stdio.h> #include <tr1/regex> using namespace std; int main() { int test[2]; const tr1::regex pattern(".*"); test[0] = 1; if (tr1::regex_match("anything", pattern) == false) { printf("Pattern does not match.\n"); } return 0; } using g++ -pedantic -g -O1 -o ./main.o ./main.cpp It outputs this errors: ./main.cpp: In function ‘int main()’: ./main.cpp:13:43: error: ‘printf’ was not declared in this scope radek@mypc:~> nano main.cpp radek@mypc:~> g++ -pedantic -g -O1 -o ./main.o ./main.cpp /tmp/cc0g3GUE.o: In function `basic_regex': /usr/include/c++/4.5/tr1_impl/regex:771: undefined reference to `std::tr1::basic_regex<char, std::tr1::regex_traits<char> >::_M_compile()' /tmp/cc0g3GUE.o: In function `bool std::tr1::regex_match<char const*, char, std::tr1::regex_traits<char> >(char const*, char const*, std::tr1::basic_regex<char, std::tr1::regex_traits<char> > const&, std::bitset<11u>)': /usr/include/c++/4.5/tr1_impl/regex:2144: undefined reference to `bool std::tr1::regex_match<char const*, std::allocator<std::tr1::sub_match<char const*> >, char, std::tr1::regex_traits<char> >(char const*, char const*, std::tr1::match_results<char const*, std::allocator<std::tr1::sub_match<char const*> > >&, std::tr1::basic_regex<char, std::tr1::regex_traits<char> > const&, std::bitset<11u>)' collect2: ld returned 1 exit status What packages should i (un)install to make the code work on my PC?

    Read the article

  • speakers dont work in macbook pro

    - by Ali_IT
    I have a macbook pro but my Built-in stereo speakers don't work and it comes a red light from Headphone out/optical digital audio out port. my Built-in stereo speakers aren't dead because at first that OS runs it comes a sound from them but as soon as the macbook pro is ready when i play music they don't work and In the SOUND in system preferences the name of device for sound output is Digital Out. Is the problem from hardware or software. Is there any solution?

    Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >