Search Results

Search found 18845 results on 754 pages for 'the machine charmer'.

Page 478/754 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

• Is it possible to create a delta VM?

  - by iTayb

  I have a VM of approx. 18GB. Sometimes I need temporally clones of it, so I clone it. The problems are: * It takes a while until it's done. * Sometimes I happen to need dozen of clones and I'm running out of storage. I wonder if there's a way to create a VM that saves only the delta (difference) since the delployment out of the source machine. That way each new VM's filesize should be 100MB at most, and creating it will be much faster. I've heard that VMWare View is using this concept. Is such a thing possible for ESXi as well? I'm using ESXi 4.1 with VSphere 4.1. Thanks!

  Read the article

• On VMWare Server, how can I specify which Ethernet port should be the one to be bridged?

  - by DrDavid

  My server has 4 ethernet ports; 1 uses a APIPA address to connect to a DroboElite (that's how they're designed to work), 1 is connected to the LAN, and the other two are unused currently. The issue is that VMWare Server seems to have an affinity to the port that's connected to the Drobo, which means that it can never reach the internet. If I disable the Drobo port, everything works just fine. If I enable the drobo port, nothing works (well, the drobo works, but the virtual machine doesn't ;) ) How can I tell VMWare Server to NOT use the drobo port when I'm bridging the connection?

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• Is it safe to buy a replacement laptop battery that has slightly different voltage than the original?

  - by Hugoagogo

  I'm looking for a new battery for my Acer Aspire 4741g laptop. I am trying to get a higher capacity battery. Many sites (like this one and this one) list batteries that are interchangeable with the battery that came with the laptop (AS10D41). These batteries have higher capacity, but also marginally lower voltage (11.1V vs. 11.8V). Is this a problem? Does it mean that the battery is actually incompatible? The replacement battery I am looking at is AS10G3E, and is listed in many places as being compatible with the AS10D41, but nobody makes any mention of the differing voltages. I am trying to find out what kind of problems a lower voltage battery can cause. I know P=IV; with reduced voltage, will the machine draw more current, possibly damaging components? I'm just speculating, but I'm worried about the chance that using a battery at a lower voltage will damage my laptop.

  Read the article

• AWS RDS Timeout

  - by warder57

  I know next to nothing about networking/servers. So I'm assuming I'm missing something obvious. All of the resources I can find on this, either don't work or are outdated. I created a brand new AWS account on the free plan. I created a postgres RDS DB instance. I made sure that this RDS instance is set to publicly accessible. This RDS instance has the default VPC/Security Group settings. In order to connect to this DB from my local machine, I used pgadmin3 and followed the instructions provided on the AWS documentation page. Seen here: http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_ConnectToPostgreSQLInstance.html I've double checked all of the information required to connect: Host: whatever.whatever.us-west-2.rds.amazonaws.com Port: 5432 Username: USERNAME Password: PASSWORD When I try to connect to the database, my connection fails due to a timeout. (During step 4 in the above guide.) Can anyone point me to whatever I am missing? Thanks in advance

  Read the article

• Ubuntu 13.04 client cannot connect to Raspbian samba share

  - by envoyweb

  I have a client Ubuntu 13.04 machine trying to connect to a server running Raspbian with samba and samba-common-bin installed on the server I can see my share and when I try to login I get this error: Unable to access location: Failed to write windows share Cannot allocate memory. I have installed ntfs-3g for the usb hard drive that already auto mounts on the server so I never had to create a directory or edit fstab. Testparm on the server states the following: [global] workgroup = ENVOYWEB server string = %h server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [homes] comment = Home Directories valid users = %S create mask = 0700 directory mask = 0700 browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [BigDude] comment = Sharing BigDude's Files path = /media/BigDude/ valid users = @users read only = No create mask = 0755 testparm on the client which is running ubuntu is as follows [global] workgroup = ENVOYWEB server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers

  Read the article

• How to disable System service from listening on port 80 in Windows Server 2003

  - by Miky D

  I'm trying to install a service on a Windows Server 2003 machine which is supposed to listen on port 80 but it fails to start because some other service is already listening on that port. So far I've disabled the IIS Admin service and the HTTP SSL service but no luck. When I run netstat -a -n -o | findstr 0.0:80 it gives me the process id 4 as the culprit, but when I look at the running processes that process id points to the "System" process. What can I do to get the System process to stop listening on port 80 and get my service to listen instead?

  Read the article

• opening Dbf files in oracle 10g

  - by nagaraju

  This nagaraju,from India,Hyderabad. I have installed oracle 10g trail version in my system(E drive),created one database with my name(database:-nagaraju),in that created tables, prodecures ,functions ,sequences etc for my project. Due to some sudden problem,i formatted my machine C drive,now iam not ablle to open my database, i need all procedures ,tables which i created in that. Now I newly installed oracle10g again in another folder,how can i copy my old database into my inew installation database. Or can i copy the script of procedures so that ican run in new database. I have all data in Oradata folder,like DBF files etc. Could you please help me, how to do that?

  Read the article

• Having trouble with EPSON Stylus SX130 scanner

  - by pinouchon

  I am trying to scan files with an EPSON Stylus SX130 on windows 7 x64. When i plug in the printer, windows automatically find drivers for printing, but not for scanning. So i go to the manufacturer website to download the drivers, select windows 7 64-bit and download drivers for EPSON Scan. The install works fine, but when i try to scan a file (eg: from paint or Windows fax and scan), the folowing message pops up and freezes the application : the progress bar plays the animation forever and the application does not respond. I then have no choice to kill the application with the task manager. Do you have an idea of what's going on ? How can i fix the problem, ie: how do i get the scanner actually scan files without freezing ? I tried to install the driver from the CD given in the printer package, and got the same problem. The only help i found so far (the error seems somewhat related) is this : Install a xp virtual machine and run it in there

  Read the article

• Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, lengthy login/logout delays

  - by NahsiN

  Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

• How can I make a vpn network login the default behavior for logging into Windows?

  - by Danny

  To login to the machine, I have to login to our domain. When I am at work, the unauthenticated wireless permits access to the domain. However, the internet is not available until I connect via the vpn. From home, I have to connect via the vpn first, then I can login to the domain. I have successfully setup a network logon with the vpn (following the directions found here). And for the most part it works correctly. (There is an issue with logout/login I haven't figured out just yet). As I currently have to Switch User and select the Network Login button, I'd like to know if it is possible to have the network login the default behavior when logging into the system. This is mostly a usability issue than anything else.

  Read the article

• What emulator / VM software can I use to create a Win32-portable Linux Guest?

  - by Jotham

  Hi, I want to create a portable VM setup so that I can boot a Linux install regardless of which Windows XP / Windows 7 host machine I am on. I was looking at Qemu but it doesn't appear to have a relatively safe win32 build. Other things like VirtualBox require complete install on the host OS for performance reasons. I'm not so concerned about performance, I just want to run a few curses based applications. My ideal end goal would be a a memory stick of some size with a VM/Emulator I can boot on most WinXP/Windows 7 machines and access my own curses based applications (probably archlinux or debian). Any help would be appreciated. Regards,

  Read the article

• How the computer could be used by two users at the same time

  - by user59595

  Running windows 7 64, Is there any application that allows me to connect an additional keeyboard and mice and monitor, so that this can be used by other user at the samee time while I use the main computer, There is an application called cpnmouse but it doesnt work on win7, betwin crashes before win7 start up, teamplayer is too expensive Has anyone figured out this functionality maybe with virtual machinees or something, i've tried team player in a virtual machine but it crashes I have 3 monitors one of theem is a Tv, i would like that my girlfried uses it as a terminal without me loosing the focus cause she uses the mice There is a linux software called userful, but it's linux and doesnt work for me, and windows multipoint server needs a clean installation and also that's not a valid choice

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• How to change the amount of RAM displayed in System Properties

  - by Nicu Zecheru

  I have this product that requires at least 1 GB Physical Memory in order to be installed. On my XP Pro machine I have 1 GB of RAM but in System Properties only 0.99 GB of RAM is displayed. The problem is that the product installer checks the memory displayed in System Properties (just a guess, not sure) and cannot continue the setup because it sees only 0.99 GB. Is there any way to change the displayed memory in the System Properties? Or how can I trick the installer to skip the memory check? Thanks.

  Read the article

• Attempting to install .NET framework 4 *full* installs *client* instead

  - by msorens

  On a Win7 SP1 32-bit machine, I initially had .NET 4 client installed and wanted to upgrade to .NET 4 full. I downloaded the full installer dotNetFx40_Full_x86_x64.exe from Microsoft. After download the file showed 48.11MB, the correct size for the full package (vs. 41MB for the client). I ran the installer and it first prompted to repair or remove the existing package. I chose to remove, so uninstalled the two parts, 4 extended and 4 client. Reboot. I reran the installer and it began installation, showing that it was installing the client. Though this raised an eyebrow for me, I let it run to completion, thinking it might be reporting the full install in sections. But after completion, I again ended up with 4 extended and 4 client installed! Obviously I am missing something; ideas...?

  Read the article

• What is the simplest and fastest way to transfer large file through a Windows network?

  - by Sake

  I have a Window Server 2000 machine running MS SQL Server that stores over 20GB of data. The database is backed-up every day to the second harddrive. I want to transfer those backup files to another computer to build another test server and for recovery practicing. (the backup never actually got restored for almost 5 years. Don't tell my boss about that!) I have trouble transfering that huge file through the network. I've tried plain network copy, apache download, and ftp. Any method I tried end up failing when the amount of data transfered reach 2GB. The last time that I successfully transfered the file, it was through a usb attached external harddrive. But I want to perform this task routinely and preferably automatically. Wonder what is the most pragmatic approach for this situation ?

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• ubuntu qcow2 image for local usage

  - by aisbaa

  I'm using kvm and I would like to run ubuntu server on it. My goal is to run db2 database instance for development. Is there ready to use ubuntu qcow2 images online for such purpose? Or should I install it from live cd? I've found this instruction UEC/Images, but at launch I get: $ kvm -fda ${floppy} -drive if=virtio,file=./disk.img -boot a ... Nothing to boot: No such file or directory (http://ipxe.org/...) No more network devices No bootable device. Solution: I havent found pre-installed ubuntu virtual machine image online, so solution is to install it by your self.

  Read the article

• Is there a way to customise PPD distribution of printer drivers effectively with Mac Os X server?

  - by glenstorey

  Hi, we have two network printers shared via our 10.5.8 Mac Os Server machine. They have drivers provided by the manufacturer that allow job logging (printing with a print code). I've installed said drivers on the server, but when we distribute the printer on our Mac Os clients (using add printer via bonjour) it deploys older drivers that don't support Job Logging. Is there a way to update the store of print drivers (cups drivers?) on the server so it distributes the updated drivers, rather than the older one?

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Installing Office 2010 without through group policy without an msi

  - by Ri Caragol

  I have been breaking my head for several days now trying to install Microsoft office 2010 through group policy. Unfortunately Microsoft decided it would be fun to release office without an MSI and so I either 1) need to create an msi for it or 2) need to install it through a logon script that would run the setup.exe from a network location. Any advise would be greatlly appreciated. I tried to create a script but even though I double click it and it runs properly, it does not seem to kick in when users log in or when the machine is turned on. Also is there an easy way to create an msi? thanks! -Ri

  Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >