Search Results

Search found 13909 results on 557 pages for 'old man'.

Page 479/557 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• WinCE and PC USB communication

  - by sebeksd

  We are developing some device and we need to find good solution for one of needed functionality. Thing is that we need communicate WinCE 6.0 (ARM) and Windows on PC. Easiest way is of course COM port but in our case it is impossible (all serial ports are used on WinCE and we don't want to add one more). Second option is LAN but for us it is not the best option for few reasons. So there is third option we could use. USB to USB communication but how to do that ? Of course WinCE is USB Device and PC is USB Host so all hardware basics are meet. We could use Active sync but there are few problems with it: - WinCE 6.0 is not working with WMDC (drivers on device just crash after connecting device with PC) and I didn't find any solution for it so in this case we need to use WinXP on PC side (old ActiveSync) - we need to filter communication with active sync to only our application, no other non authorized software should be allowed (what I know this is imposible to obtain). So propably best way to do what we need is to communicate throug USB like standard COM (serial communication). The question is, how it could be made, are we need to write driver on WinCE and also a Driver on Windows (PC), or there are better solution? Maybe some driver for WinCE 6.0 that would emulate Virtual COM on PC side (and of course allow standard Read/Write to it on WinCE side) ? Could someone tell me if something like that exists ?

  Read the article

• JQuery fadeIn fadeOut loop issue

  - by Tarun

  I am trying to create a jQuery fadeIn fadeout effect for my page content using the code below. $(document).ready(function (){ $("#main").click(function(){ $("#content").fadeOut(800, function(){ $("#content").load("main.html", function(){ $("#content").fadeIn(800); }); }); }); $("#gallery").click(function(){ $("#content").fadeOut(800, function(){ $("#content").load("gallery.html", function(){ $("#content").fadeIn(800); }); }); }); }); So whenever a user clicks on either the main link or gallery link, the old content fades out and new content fades in. The problem I am facing is that for every link I have to repeat the same code again and again. So I tried to use a loop to simplify this but it doesn't work. Here is my code: var p = ["#main","#gallery", "#contact"]; var q = ["main.html", "gallery.html", "contact.html"]; for (i=0;i<=(p.length-1);i++){ $(p[i]).click(function(){ $("#content").fadeOut(500, function(){ $("#content").load(q[i], function(){ $("#content").fadeIn(500); }); }); }); } It works fine when I write repeat the scripts for each link but it doesn't work when I combine them in a loop. I only get the FadeOut effect and nothing happens after that. This might be a very simple issue or may be something deep into jQuery. Any hint or help is greatly appreciated. TK

  Read the article

• What is a good automated data import method for SQL Server?

  - by Joel Potter

  I'm in the process of porting some SQL Server 2005 databases to SQL Server 2008. One of these databases has an associated import application (Windows task) which uses SSIS with a DTS package to import a large dataset from an MS Access database nightly. In upgrading to SQL Server 2008, I discovered that I can't run the same console application which has been performing the imports due to the missing manageddts DLL in SQL Server 2008. It's several years old and in need of a rewrite for various reason, plus, I've been fairly unhappy with DTS in general. The original reason DTS was chosen was for speed (5 min import time compared to 30+ for ADO.NET). The format of the data to import is out of my control (the client likes Access). I would also like to be able to run the import from a machine completely separate from the server hosting SQL Server and preferably with minimal SQL features installed. Options I've considered: Creating an Access application to connect to both databases (SQL Server and Access) and perform the import (Ugh!) Revisiting ADO.NET to see if the original implementation was poorly written. Updated SSIS packages. What other technologies should I be considering for this job?

  Read the article

• List of fonts installed by default in versions of Windows?

  - by Ricket

  I've been seeing more and more websites using fancy antialiased fonts. Every time I hit one, I think to myself "hmm, what web-safe font is that?" - but after looking at the CSS I typically find some font name in quotes, like "Palatino Linotype". Obviously not web-safe, but according to the Wikipedia article, "Palatino Linotype is shipped with Windows 2000 or later, and Microsoft Office Professional Edition 2003." So that covers what, 95% of users that might visit your website? And thanks to the power of CSS, the website can fallback to a similar generic font typename such as 'serif' for non-Windows users with a line like this: font: 16px/20px "Palatino Linotype", serif; Awesome! I want to start using fancy fonts! Is there a set of lists out there, of the fonts that are preinstalled by default in Windows 98, 2000, NT, ME, XP, 2003, etc., and maybe for the Mac OSX versions and various Linux distributions as well? It would be a great reference for picking web font faces! (if not, someone should compile it!) I had never before heard of Palatino Linotype and I want to know what other fonts have existed since old Windows versions that I've never known about!

  Read the article

• Which plugin framework to use for native C++/Win32

  - by Kerido

  Hi everybody. I have an extensible product that allows 3rd party developers to extend it. The aspects that can be extended are documented and interfaces are provided in the SDK. Currently, I'm using COM and I'm getting pretty comfortable with it. I especially like the ability to provide interface versioning in a unified manner. I consider it to be a requirement because you never know what you're gonna need in the future. Just to be precise, here's an example. Let's suppose I have an interface representing a particular feature: class IFeature { public: virtual void DoFeatureTask() = 0; }; Then after the interface is already documented (and someone may have used it in the plugin code) I'm realizing, I need more from this feature. Maybe, there is an option I need to provide. I just define the second version: class IFeature2 { public: virtual void DoFeatureTask(int theOption) = 0; }; I don't mean I intend to have lots of versions. But it just may happen. In COM, because every interface is associated with a GUID, I can query a preferred implementation, determine its presence, and, finally, fall back to a legacy one. But after glancing through C++/COM-related questions, I noticed many recommendations against COM. So maybe it's not the best choice and I'm just too old-school. Can you advise on an alternative?

  Read the article

• Examples using Active Directory/LDAP groups for permissions \ roles in Rails App.

  - by Nick Gorbikoff

  Hello. I was wondering how other people implemented this scenario. I have an internal rails app ( inventory management, label printing, shipping,etc). I'm rewriting security on the system, cause the old way got to cumbersome to maintain ( users table, passwords, roles) - I used restful_authentication and roles. It was implemented about 3 years ago. I already implemented AuthLogic with ruby-ldap-net to authenticate users ( actually that was surprisingly easy, compared to how I struggled with other frameworks/languages before). Next step is roles. I already have groups defined in Active Directory - so I don't want to run a separate roles system in my rails app, I just want to reuse Active Directory groups - since that part of the system is already maintained for other purposes ( shared drives, backups, pc access, etc) So I was wondering if others had experience implementing permissions/roles in a rails app based on groups in Active Directory or LDAP. Also the roles requirements are pretty complex. Here is an example: For instance I have users that belong to the supervisors group in AD and to inventory dept, so I was that user to be able to run "advanced" tasks in invetory - adjust qty, run reports, however other "supervisors" from other departmanets, shouldn't be able to do this, also Top Management - should be able to use those reports (regardless weather they belong to the invetory or not), but not Middle Management, unless they are in inventory group. Admins of the system (Domain Admins) should have unrestricted access to the system , except for HR & Finances part unless they are in HR ( like you don't want all system admins (except for one authorized one) to see personal info of other employees). I looked at acl9, cancan, aegis. I was wondering if there are any advantaged/cons to using one versus the other for this particular use of system access based on AD. Suggest other systems if you had good experience. Thank you!!!

  Read the article

• .Net long-running scheduled code execution

  - by Prof Plum

  I am working on a couple of projects now where I really wish there was some sort of component that I could specify a time and date, and then execute some sort of method. DateTime date = new DateTime(x,x,x,x,x,x); ScheduledMethod sMethod = new ScheduledMethod(date, [method delegate of some sort]); \\at the specified date, sMethod invokes [method delegate of some sort] I know that I can do this with Windows Workflow Foundation as a long running process, which is good for certain things, but are there any alternatives? Workflow is not exactly straight forward with the details, and it would be nice to be able to deploy something more simple for light weight tasks. An example would be a method that checks a network folder once a day and deletes any files that are more than 30 days old. I realize that this may be pie in the sky dreaming, but this would be extremely useful for automating certain mundane maintinence tasks (scheduled sql operations, file system cleansing, routine email sending, etc.). It does not necessarily have to be .Net, but that is where I am coming from. Any ideas?

  Read the article

• Different standard streams per POSIX thread

  - by Roman Nikitchenko

  Is there any possibility to achieve different redirections for standard output like printf(3) for different POSIX thread? What about standard input? I have lot of code based on standard input/output and I only can separate this code into different POSIX thread, not process. Linux operation system, C standard library. I know I can refactor code to replace printf() to fprintf() and further in this style. But in this case I need to provide some kind of context which old code doesn't have. So doesn't anybody have better idea (look into code below)? #include <pthread.h> #include <stdio.h> void* different_thread(void*) { // Something to redirect standard output which doesn't affect main thread. // ... // printf() shall go to different stream. printf("subthread test\n"); return NULL; } int main() { pthread_t id; pthread_create(&id, NULL, different_thread, NULL); // In main thread things should be printed normally... printf("main thread test\n"); pthread_join(id, NULL); return 0; }

  Read the article

• charsets in MySQL replication

  - by niklassaers

  Hi guys, What can I do to ensure that replication will use latin1 instead of utf-8? I'm migrating between an MySQL 5.1.22 server (master) on a Linux system and a MySQL 5.1.42 server (slave) on a FreeBSD system. My replication works well, but when non-ascii characters are in my varchars, they turn "weird". The Linux/MySQL-5.1.22 shows the following character set variables: character_set_client=latin1 character_set_connection=latin1 character_set_database=latin1 character_set_filesystem=binary character_set_results=latin1 character_set_server=latin1 character_set_system=utf8 character_sets_dir=/usr/share/mysql/charsets/ collation_connection=latin1_swedish_ci collation_database=latin1_swedish_ci collation_server=latin1_swedish_ci While the FreeBSD shows character_set_client=utf8 character_set_connection=utf8 character_set_database=utf8 character_set_filesystem=binary character_set_results=utf8 character_set_server=utf8 character_set_system=utf8 character_sets_dir=/usr/local/share/mysql/charsets/ collation_connection=utf8_general_ci collation_database=utf8_general_ci collation_server=utf8_general_ci Setting any of these variables from the MySQL CLI has no effect, and setting them in my.cnf or at the command line makes the server not start. Of course, both servers have the tables in question created the same way, in this case with DEFAULT CHARSET=latin1. Let me give you an example: CREATE TABLE `test` ( `test` varchar(5) DEFAULT NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1 When I on the master do, in a Latin1 terminal, "INSERT INTO test VALUES ('æøå')", this becomes on the slave, when I select it from a Latin1 based terminal +--------+ | test | +--------+ | æøå | +--------+ On a UTF-8 based terminal on the replication slave, test contains: +--------+ | test | +--------+ | æøå | +--------+ So my conclusion is that it is converted to utf8, even though the table definition is latin1. Is this a correct conclusion? Of course, on the master, in a latin1 terminal, it still says: +------+ | test | +------+ | æøå | +------+ Since both system character sets are utf-8, if I set both terminals to utf-8 and do again "INSERT INTO test VALUES ('æøå')" on the master with a utf-8 terminal, on the slave with utf-8 I get: +------------+ | test | +------------+ | æøà | +------------+ If my conclusion is correct, all my replicated data is converted to utf8 (if it is utf8, it is treated as latin1 and converted to utf8), while all the old data in the table is, as the CREATE TABLE suggests, latin1. I'd love to convert it all to utf-8 if it weren't for the fact that legacy applications rely on it being latin1, so I need to keep it in latin1 while they still exist. What can I do to ensure that the replication reads latin1, treats it as latin1 and writes it on the slave as latin1? Cheers Nik

  Read the article

• Online file storage similar to Amazon S3

  - by Joel G

  I am looking to code a file storage application in perl similar to amazon s3. I already have a amazon s3 clone that I found online called parkplace but its in ruby and is old also isn't built for high loads. I am not really sure what modules and programs I should use so id like some help picking them out. My requirements are listed below (yes I know there are lots but I could start simple then add more once I get it going): Easy API implementation for client side apps. (maybe RESTful but extras like mkdir and cp (?) Centralized database server for the USERDB (maybe PostgreSQL (?). Logging of all connections, bandwidth used, well pretty much everything to a centralized server (maybe PostgreSQL again (?). Easy server side configuration (config file(s) stored on the servers). Web based control panel for admin(s) and user(s) to show logs. (could work just running queries from the databases) Fast High Uptime Low memory usage Some sort of load distribution/load balancer (maybe a dns based or pound or perlbal or something else (?). Maybe a cache of some sort (memcached or parlbal or something else (?). Thanks in advance

  Read the article

• Visual Studio - Edit source code located in a database

  - by mfeingold

  I am building something similar to Server Explorer for Apache CouchDB. One of the things necessary is to be able to edit CouchDB view definitions which in CouchDB are JavaScript functions. How can I trick Visual Studio into using my object to retrieve and save the content of the JavaScript function but still use the rest of it - I am happy with editor itself and have no intention of writing my own Editor/Language Service, etc. The latter would be much bigger effort than what this project warrants Edit After more digging I am still stuck. Here is what I know: IVsUIShellOpenDocument interface provides a method OpenStandardEditor which can be used to open the standard Visual Studio editor. As one of the parameters this method takes a Pointer to the IUnknown interface of the document data object. This object is supposed to implement several interfaces described in many places all over the MSDN. Visual Studio SDK also provides a 'sample' implementation of the document data object VsTextBufferClass. I can create an instance of this class and when I pass the pointer to the instance to the OpenStandardEditor I can see my editor and it seems to work ok. When I try to implement my own class implementing the same interfaces (IVsTextBuffer, VsTextBuffer, IVsTextLines) OpenStandardEditor method returns success, but VS bombs out on call editor.Show() with an access violation. My suspicion is that VsTextBufferClass also implements some other interface(s) but not in C# way but rather in the good old COM way. I just do not know which one(s). Any thoughts?

  Read the article

• Classic ASP Recursive function

  - by user333411

  Hi everyone, I havent done any classic ASP for a couple of years and now trying to get back into it from c# is prooving impossible! I've got a recursive function which very simply is supposed to query a database based on a value passed to the function and once the function has stopped calling itself it returns the recordset....however im getting the old error '80020009' message. I've declared the recordset outside of the function. Cany anyone see the error in my ways? Dim objRsTmp Function buildList(intParentGroupID) Set objRsTmp = Server.CreateObject("Adodb.Recordset") SQLCommand = "SELECT * FROM tblGroups WHERE tblGroups.intParentGroupID = " & intParentGroupID & ";" objRsTmp.Open SQLCommand, strConnection, 3, 3 If Not objRsTmp.Eof Then While Not objRsTmp.Eof Response.Write(objRsTmp("strGroup") & "<br />") buildList(objRsTmp("intID")) objRsTmp.MoveNext Wend End If Set buildList = objRsTmp '#objRsTmp.Close() 'Set objRsTmp = Nothing End Function Set objRs = buildList(0) If Not objRs.Eof Then Response.Write("There are records") While Not objRs.Eof For Each oFld in objRs.Fields Response.Write(oFld.Name & ": " & oFld.Value & ",") next Response.Write("<br />") objRs.MoveNext Wend End If Any assistance would be greatly appreciated. Regards, Al

  Read the article

• How to best launch C++ application from web page

  - by JB

  I guess there are two parts to this question, one technical and one best practice for security and doing things "right". I'm working on a little game using C++ / directx but I would like to be able to launch it from a web page by someone clicking on a link on that page. Ideally I would like the first time they clicked for it to launch an installer downloads and installs the game on their machine, and then the next time to launch an application which updates the game from a web site if it's old and then launches it. I have no problems with the expected security popups and questions the first time it runs. I want people to be certain what they are installing and understand what they are doing. But it would be nice if once it is installed they could run it with the minimum of fuss. My question then is what technologies I could use to do this? I'm thinking that it would need a browser plugin and an activex control so that first time you'd install that, and subsequently the control/plugin would be able to launch the game. I'm not sure that under newer browser secuity models that a plugin would have the permissions to be able to run an installer though or silently invoke applications on the client machine even if they are already installed. Is there a more sensible way to achive what I want to achieve? And I'm worried about the security aspects too. I want this to be convenient for users but I of course want to do it "right". I know this can be done as I've seen several mmorpg type games that launch in this way from the browser now but it's not entirely clear to me how they've done it.

  Read the article

• Appropriate Footwear for An Interview

  - by EoRaptor013

  There's a raging debate going on at my house about appropriate footwear for an IT interview. I have an interview, on Thursday, for a SQL/C# developer with the Fraud dept. at a large accounting firm. I was planning on wearing what I have pretty much always worn for an interview: a nice suit, white shirt, subdued tie, and a pair of dress cowboy boots. My spouse and daughter both know that my dress code for nearly every professional job I've ever gotten, is pretty much the same -- including the boots -- with what I just described. Now, however, because I've been out of work for an unfortunately long time (my last contract ended 03/09 -- pretty much coincidental with the bottom falling out of the economy). My wife insists that style standards are fundamentally different on the left side of the Mississippi vs. the right side of the river. My view is that I've always worn "cowboy" boots; since I was old enough to fit into a real pair. I moved East, as an adult, over 30 years ago, but my dress patterns haven't changed. And in all that time, my dress patterns have never changed. Now I both really want, and really need, this job. But, is that sufficient reason to change a habit 40 years in the making? I would really appreciate the thoughts ya'all (little West of Ms. colloquialism, there) might have on this matter. Thanks. P.S. If this sort of question is inappropriate for this form, I apologize.

  Read the article

• Undefined Web.config error in VS 2008

  - by user1066050

  I'm working on a web app using VS 2008, .Net 3.5 and C#. Most of the projects in the solution are either classic asp.net pages with some MVC 1 in the mix, the rest is shared libraries. The solution is one that is some 5 years old and has gone through a variety of developers working on it and clearly has some performance and architectural issues. Previously, I've been working on the project using VS 2008 on a Win XP machine, but have just transitioned over to a new box using Win 7 Ultimate. To do so, I've installed VS 2008, asp.net 3.5. To support future work on the solution I've also installed VS 2010 and asp.net 4.0. Opening the solution on the new box with VS 2008 works fine, and it builds without error. However, when I attempt to run it with the debugger, I get the following message: "There is an error in web.config. Please correct before proceeding. (You might rename the current web.config and add a new one.)" I think it's clear that there is some sort of environmental issue regarding web.config on the new machine, but the error message is not "helpful". Adding a new web.config is not an option as the existing one is quite long and involved (too much to post here). I'm hoping someone has a suggestion or two about where I might look for missing elements or changed configurations that might produce such an error message. Lacking that, I'll revisit this post and provide the web.config in the hope that will elicit further help. Thanks to all in advance for taking a look at this. The StackOverflow community has helped me many times in the past with pertinent answers although this is my first posting. Jeff

  Read the article

• Create new or update existing entity at one go with JPA

  - by Alex R

  A have a JPA entity that has timestamp field and is distinguished by a complex identifier field. What I need is to update timestamp in an entity that has already been stored, otherwise create and store new entity with the current timestamp. As it turns out the task is not as simple as it seems from the first sight. The problem is that in concurrent environment I get nasty "Unique index or primary key violation" exception. Here's my code: // Load existing entity, if any. Entity e = entityManager.find(Entity.class, id); if (e == null) { // Could not find entity with the specified id in the database, so create new one. e = entityManager.merge(new Entity(id)); } // Set current time... e.setTimestamp(new Date()); // ...and finally save entity. entityManager.flush(); Please note that in this example entity identifier is not generated on insert, it is known in advance. When two or more of threads run this block of code in parallel, they may simultaneously get null from entityManager.find(Entity.class, id) method call, so they will attempt to save two or more entities at the same time, with the same identifier resulting in error. I think that there are few solutions to the problem. Sure I could synchronize this code block with a global lock to prevent concurrent access to the database, but would it be the most efficient way? Some databases support very handy MERGE statement that updates existing or creates new row if none exists. But I doubt that OpenJPA (JPA implementation of my choice) supports it. Event if JPA does not support SQL MERGE, I can always fall back to plain old JDBC and do whatever I want with the database. But I don't want to leave comfortable API and mess with hairy JDBC+SQL combination. There is a magic trick to fix it using standard JPA API only, but I don't know it yet. Please help.

  Read the article

• Pass ng-model and place-holder value into directive

  - by Zen

  I have a segment of code needs to be reuse a lot, there for I want to just create a directive for it. <div class="btn-group"> <div class="input-group"> <div class="has-feedback"> <input type="text" class="form-control" placeholder="BLAH BLAH" ng-model="model"> <span class="times form-control-feedback" ng-click="model=''" ng-show="model.length > 0"></span> </div> </div> </div> I want to use this code as template in directive. Create a directive used as follow: <div search-Field ng-model="model" placeholder="STRING"></div> to replace to old html, ng-model and placeholder will be as variables. angular.module('searchField', []) .directive('searchField', [function () { return { scope: { placeholder: '@', ngModel: '=' }, templateUrl: 'Partials/_SearchInputGroup.html' } }]); Is it the way of doing it?

  Read the article

• Installing Rails on Mountain Lion

  - by Jordan Medlock

  I was wondering if you could help me find why I cannot install Ruby on Rails on my MBP with OS X Mountain Lion. It's a weird problem and I'll give you as much info as I can. I've installed ruby and it's working at version 1.9.3 And I've installed ruby gems and it's worked for every other gem I've tried to install. It's version is 1.8.24 When I run $ sudo gem install rails it replies with the message: Successfully installed rails-3.2.8 1 gem installed Although when I ask it rails -v it returns: `Rails is not currently installed on this system. To get the latest version, simply type: $ sudo gem install rails You can then rerun your "rails" command.` What should I do? The rails bash file (/usr/bin/rails) contains: #!/usr/bin/ruby # Stub rails command to load rails from Gems or print an error if not installed. require 'rubygems' version = ">= 0" if ARGV.first =~ /^_(.*)_$/ and Gem::Version.correct? $1 then version = $1 ARGV.shift end begin gem 'railties', version or raise rescue Exception puts 'Rails is not currently installed on this system. To get the latest version, simply type:' puts puts ' $ sudo gem install rails' puts puts 'You can then rerun your "rails" command.' exit 0 end load Gem.bin_path('railties', 'rails', version) That must mean that the gem files aren't there or are old or corrupted How can I check that?

  Read the article

• 60K+ Sprites on the 360?

  - by Jeffrey Kern

  Hey everyone, Just wondering - throwing ideas in my head - about starting a new XNA project for the 360. I would like it to be retro-old school, and emulating scanlines and color palettes and such. As part of this idea, what I would ideally like to do is manually draw each and every pixel of the screen. So, worst-case scenario I would have to draw about 60K sprites on a 252x240 resolution (I think thats correct). 60K sprites on the screen at a time. So, before I even attempt to code this - would the XBOX 360 be able to keep up with this even? That is a lot of sprites, but they aren't big sprites, and the texture data needed would be non-existant. However, I guess how this project would be implemented would make it or break it, but all I was thinking was coming up with a 2D array and mapping which color value would need to be drawn at that point. Of course, this is watered down talk right now. But what you all suggest? EDIT: Each sprite would represent one pixel. E.g., a sprite at 0,0. Another at 0,1. etc.

  Read the article

• What is the current status of LOGO? (The programming language)

  - by Workshop Alex

  In another Q I saw someone mention LOGO and it reminded me of some programming language from the past, mostly used for educational purposes. Basically, you would have to program a turtle with a pen through it's back. By telling it where to move, the pen would draw lines. It could also lift the pen to move without drawing lines. I have fond memories of this language, since it was one of the first I've ever used, about 30 years ago. (Yeah, I'm old.) Well, I only programmed with LOGO for two days or so, but it got me hooked to programming. But I wonder if the LOGO information on it's Wikipedia page is still correct. And more importantly, are there versions that will create .NET binaries? Are there only LOGO Interpreters and no compilers? What is the current status of this educational language? And more interestingly, are there more experts here at SO who have experimented with LOGO in the past? Yeah, I know. Nowadays this language is a bit antique but I got some warm and comfortable memories when I remembered this interesting language from my history. For a teenager back then, it was fun!

  Read the article

• Visual Studio and .NET programming

  - by Vit

  Hi, I just want to ask wheather I am right or not about .NET. So, .NET is new framework that enables you to easily implement new and old windows functions. It is similiar to java in the way that its also compiled into "bytecode", but its name is Common Language Infrastructure, or CLI. This language is interpreted by .NET Framework, so code generated by programming using .NET cannot be executed directly by CPU. Now, few languages can be compiled to CLI. First, it was Microsoft-developed C#, than J#, C++ others. I suspect that this is in general right, at least I hope I understand it right. But, what I am still missing is, can you write to machine code compiled code in C#? And, if using Visual Studio 2005, when I select Win32 project, it is compiled into machine code, so only thing you need to run this apps are windows dynamic-link libraries, since static libraries code is implemented into app durink linking phase. And those dynamic-link libraries are implemented in every windows installation, or provided by DirectX installations. But when I select CLR in Visual Studio 2005, than app is compiled into CLI code, and it first executes .NET framework, and than .NET framework executes that program, since its not in machine code. So, I am right? I ask becouse you can read these infos on the internet, but I have noone to tell me wheather I understand it right or not. Thanks.

  Read the article

• Is the size of a struct required to be an exact multiple of the alignment of that struct?

  - by Steve314

  Once again, I'm questioning a longstanding belief. Until today, I believed that the alignment of the following struct would normally be 4 and the size would normally be 5... struct example { int m_Assume_32_Bits; char m_Assume_8_Bit_Bytes; }; Because of this assumption, I have data structure code that uses offsetof to determine the distance in bytes between two adjacent items in an array. Today, I spotted some old code that was using sizeof where it shouldn't, couldn't understand why I hadn't had bugs from it, coded up a unit test - and the test surprised me by passing. A bit of investigation showed that the sizeof the type I used for the test (similar to the struct above) was an exact multiple of the alignment - ie 8 bytes. It had padding after the final member. Here is an example of why I never expected this... struct example2 { example m_Example; char m_Why_Cant_This_Be_At_Offset_6_Bytes; }; A bit of Googling showed examples that make it clear that this padding after the final member is allowed - for example http://en.wikipedia.org/wiki/Data_structure_alignment#Data_structure_padding (the "or at the end of the structure" bit). This is a bit embarrassing, as I recently posted this comment - Use of struct padding (my first comment to that answer). What I can't seem to determine is whether this padding to an exact multiple of the alignment is guaranteed by the C++ standard, or whether it is just something that is permitted and that some (but maybe not all) compilers do. So - is the size of a struct required to be an exact multiple of the alignment of that struct according to the C++ standard? If the C standard makes different guarantees, I'm interested in that too, but the focus is on C++.

  Read the article

• Validating Login / Changing User settings / Php Mysql

  - by Marcelo

  Hi everyone, my questions are about login, and changing already saved data. (Q1) 'Till now I've only saved input in the tables of the database (registration steps), now I need to check if the input (login steps), are the same of my table in database, in fact I have 3 types of users, then I'll have to check 3 kind of tables. Then if the input data matches with one of those 3 tables I will redirect the user to his specific area. I'm thinking about saved the submitted data $login=$_REQUEST['login']; and $password=$_REQUEST['password']; and compare with the login column in the database. Then if the login matches, I'll compare the password submitted with the one in the row, not in the column. But I don't know how to do this search and comparison,neither what to use. Then if both matches I'll redirect the user. Else I'll send an login error message. (this I know how to do) (Q2) What if need to change an already saved user ? For example to change an email address. My changing user's data web page is exactly the same like the registration user web page. Can I load the already saved options and values of registration (table user for example). Then the user will change whatever he thinks it's necessary, and then when he submits the new information, they would not create a new row in my table, but just be overwritten the old information? How can I do this? Sorry for any mistake in English, and Thanks for the attention.

  Read the article

• Programatically rebuild .exd-files when loading VBA

  - by aspartame

  Hi, After updating Microsoft Office 2007 to Office 2010 some custom VBA scripts embedded in our software failed to compile with the following error message: Object library invalid or contains references to object definitions that could not be found. As far as I know, this error is a result of a security update from Microsoft (Microsoft Security Advisory 960715). When adding ActiveX-controls to VBA scripts, information about the controls are stored in cache files on the local hard drive (.exd-files). The security update modified some of these controls, but the .exd-files were not automatically updated. When the VBA scripts try to load the old versions of the controls stored in the cached files, the error occurs. These cache-files must be removed from the hard drive in order for the controls to load successfully (which will create new, updated .exd-files automatically). What I would like to do is to programatically (using Visual C++) remove the outdated .exd-files when our software loads. When opening a VBA project using CApcProject::ApcProject.Open I set the following flag:axProjectThrowAwayCompiledState. TestHR(ApcProject.Open(pHost, (MSAPC::AxProjectFlag) (MSAPC::axProjectNormal | MSAPC::axProjectThrowAwayCompiledState))); According to the documentation, this flag should cause the VBA project to be recompiled and the temporary files to be deleted and rebuilt. I've also tried to update the checksum of the host application type library which should have the same effect. However none of these fixes seem to do the job and I'm running out of ideas. Help is very much appreciated!

  Read the article

• As3 printing problem, blanks swf after print or cancel

  - by Carlos Barbosa

  Hey all! ok back at another issues in as3 printing Code: //Function to print entire screen function printFunction(event:MouseEvent):void { var myPrintJob:PrintJob = new PrintJob(); var oldScaleX:Number = root.scaleX; var oldScaleY:Number = root.scaleY; //Start the print job myPrintJob.start(); //Figure out the new scale var newScaleX:Number = myPrintJob.paperWidth/root.width; var newScaleY:Number = myPrintJob.paperHeight/root.height; //Shrink in both the X and Y directions by the same amount (keep the same ratio) if(newScaleX < newScaleY) newScaleY = newScaleX; else newScaleX = newScaleY; root.scaleX = newScaleX; root.scaleY = newScaleY; //Print the page myPrintJob.addPage(Sprite(root)); myPrintJob.send(); //Reset the scale to the old values root.scaleX = oldScaleX; root.scaleY = oldScaleY; } I cant seem to find anything thats really helpful with this. When i click cancel on the print dialog box, i get error below and it blanks out my swf.

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >