Search Results

Search found 21875 results on 875 pages for 'program launchers'.

Page 479/875 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

  • C compiler producing lightweight executeables

    - by samuel
    I'm currently using MSVC for C++ but as I'm switching to C to write a very performance-intensive program (interpreter) I have to search for a fitting C compiler. I've looked at some binaries produced by Turbo-C and even if its old they seem pretty straigthforward and optimized. Now I don't know what the best compiler for building an interpreter is, but maybe you can help me. I've considered GCC but as I don't know much about it, I can't be really sure.

    Read the article

  • 7u10: JavaFX packaging tools update

    - by igor
    Last weeks were very busy here in Oracle. JavaOne 2012 is next week. Come to see us there! Meanwhile i'd like to quickly update you on recent developments in the area of packaging tools. This is an area of ongoing development for the team, and we are  continuing to refine and improve both the tools and the process. Thanks to everyone who shared experiences and suggestions with us. We are listening and fixed many of reported issues. Please keep them coming as comments on the blog or (even better) file issues directly to the JIRA. In this post i'll focus on several new packaging features added in JDK 7 update 10: Self-Contained Applications: Select Java Runtime to bundle Self-Contained Applications: Create Package without Java Runtime Self-Contained Applications: Package non-JavaFX application Option to disable proxy setup in the JavaFX launcher Ability to specify codebase for WebStart application Option to update existing jar file Self-Contained Applications: Specify application icon Self-Contained Applications: Pass parameters on the command line All these features and number of other important bug fixes are available in the developer preview builds of JDK 7 update 10 (build 8 or later). Please give them a try and share your feedback! Self-Contained Applications: Select Java Runtime to bundle Packager tools in 7u6 assume current JDK (based on java.home property) is the source for embedded runtime. This is useful simplification for many scenarios but there are cases where ability to specify what to embed explicitly is handy. For example IDE may be using fixed JDK to build the project and this is not the version you want to bundle into your application. To make it more flexible we now allow to specify location of base JDK explicitly. It is optional and if you do not specify it then current JDK will be used (i.e. this change is fully backward compatible). New 'basedir' attribute was added to <fx:platform> tag. Its value is location of JDK to be used. It is ok to point to either JRE inside the JDK or JDK top level folder. However, it must be JDK and not JRE as we need other JDK tools for proper packaging and it must be recent version of JDK that is bundled with JavaFX (i.e. Java 7 update 6 or later). Here are examples (<fx:platform> is part of <fx:deploy> task): <fx:platform basedir="${java.home}"/> <fx:platform basedir="c:\tools\jdk7"/> Hint: this feature enables you to use packaging tools from JDK 7 update 10 (and benefit from bug fixes and other features described below) to create application package with bundled FCS version of JRE 7 update 6. Self-Contained Applications: Create Package without Java Runtime This may sound a bit puzzling at first glance. Package without embedded Java Runtime is not really self-contained and obviously will not help with: Deployment on fresh systems. JRE need to be installed separately (and this step will require admin permissions). Possible compatibility issues due to updates of system runtime. However, these packages are much much smaller in size. If download size matters and you are confident that user have recommended system JRE installed then this may be good option to consider if you want to improve user experience for install and launch. Technically, this is implemented as an extension of previous feature. Pass empty string as value for 'basedir' attribute and this will be treated as request to not bundle Java runtime, e.g. <fx:platform basedir=""/> Self-Contained Applications: Package non-JavaFX application One of popular questions people ask about self-contained applications - can i package my Java application as self-contained application? Absolutely. This is true even for tools shipped with JDK 7 update 6. Simply follow steps for creating package for Swing application with integrated JavaFX content and they will work even if your application does not use JavaFX. What's wrong with it? Well, there are few caveats: bundle size is larger because JavaFX is bundled whilst it is not really needed main application jar needs to be packaged to comply to JavaFX packaging requirements(and this may be not trivial to achieve in your existing build scripts) javafx application launcher may not work well with startup logic of your application (for example launcher will initialize networking stack and this may void custom networking settings in your application code) In JDK 7 update 6 <fx:deploy> was updated to accept arbitrary executable jar as an input. Self-contained application package will be created preserving input jar as-is, i.e. no JavaFX launcher will be embedded. This does not help with first point above but resolves other two. More formally following assertions must be true for packaging to succeed: application can be launched as "java -jar YourApp.jar" from the command line  mainClass attribute of <fx:application> refers to application main class <fx:resources> lists all resources needed for the application To give you an example lets assume we need to create a bundle for application consisting of 3 jars:     dist/javamain.jar     dist/lib/somelib.jar    dist/morelibs/anotherlib.jar where javamain.jar has manifest with      Main-Class: app.Main     Class-Path: lib/somelib.jar morelibs/anotherlib.jar Here is sample ant code to package it: <target name="package-bundle"> <taskdef resource="com/sun/javafx/tools/ant/antlib.xml" uri="javafx:com.sun.javafx.tools.ant" classpath="${javafx.tools.ant.jar}"/> <fx:deploy nativeBundles="all" width="100" height="100" outdir="native-packages/" outfile="MyJavaApp"> <info title="Sample project" vendor="Me" description="Test built from Java executable jar"/> <fx:application id="myapp" version="1.0" mainClass="app.Main" name="MyJavaApp"/> <fx:resources> <fx:fileset dir="dist"> <include name="javamain.jar"/> <include name="lib/somelib.jar"/> <include name="morelibs/anotherlib.jar"/> </fx:fileset> </fx:resources> </fx:deploy> </target> Option to disable proxy setup in the JavaFX launcher Since JavaFX 2.2 (part of JDK 7u6) properly packaged JavaFX applications  have proxy settings initialized according to Java Runtime configuration settings. This is handy for most of the application accessing network with one exception. If your application explicitly sets networking properties (e.g. socksProxyHost) then they must be set before networking stack is initialized. Proxy detection will initialize networking stack and therefore your custom settings will be ignored. One way to disable proxy setup by the embedded JavaFX launcher is to pass "-Djavafx.autoproxy.disable=true" on the command line. This is good for troubleshooting (proxy detection may cause significant startup time increases if network is misconfigured) but not really user friendly. Now proxy setup will be disabled if manifest of main application jar has "JavaFX-Feature-Proxy" entry with value "None". Here is simple example of adding this entry using <fx:jar> task: <fx:jar destfile="dist/sampleapp.jar"> <fx:application refid="myapp"/> <fx:resources refid="myresources"/> <fileset dir="build/classes"/> <manifest> <attribute name="JavaFX-Feature-Proxy" value="None"/> </manifest> </fx:jar> Ability to specify codebase for WebStart application JavaFX applications do not need to specify codebase (i.e. absolute location where application code will be deployed) for most of real world deployment scenarios. This is convenient as application does not need to be modified when it is moved from development to deployment environment. However, some developers want to ensure copies of their application JNLP file will redirect to master location. This is where codebase is needed. To avoid need to edit JNLP file manually <fx:deploy> task now accepts optional codebase attribute. If attribute is not specified packager will generate same no-codebase files as before. If codebase value is explicitly specified then generated JNLP files (including JNLP content embedded into web page) will use it.  Here is an example: <fx:deploy width="600" height="400" outdir="Samples" codebase="http://localhost/codebaseTest" outfile="TestApp"> .... </fx:deploy> Option to update existing jar file JavaFX packaging procedures are optimized for new application that can use ant or command line javafxpackager utility. This may lead to some redundant steps when you add it to your existing build process. One typical situation is that you might already have a build procedure that produces executable jar file with custom manifest. To properly package it as JavaFX executable jar you would need to unpack it and then use javafxpackager or <fx:jar> to create jar again (and you need to make sure you pass all important details from your custom manifest). We added option to pass jar file as an input to javafxpackager and <fx:jar>. This simplifies integration of JavaFX packaging tools into existing build  process as postprocessing step. By the way, we are looking for ways to simplify this further. Please share your suggestions! On the technical side this works as follows. Both <fx:jar> and javafxpackager will attempt to update existing jar file if this is the only input file. Update process will add JavaFX launcher classes and update the jar manifest with JavaFX attributes. Your custom attributes will be preserved. Update could be performed in place or result may be saved to a different file. Main-Class and Class-Path elements (if present) of manifest of input jar file will be used for JavaFX application  unless they are explicitly overriden in the packaging command you use. E.g. attribute mainClass of <fx:application> (or -appclass in the javafxpackager case) overrides existing Main-Class in the jar manifest. Note that class specified in the Main-Class attribute could either extend JavaFX Application or provide static main() method. Here are examples of updating jar file using javafxpackager: Create new JavaFX executable jar as a copy of given jar file javafxpackager -createjar -srcdir dist -srcfiles fish_proto.jar -outdir dist -outfile fish.jar  Update existing jar file to be JavaFX executable jar and use test.Fish as main application class javafxpackager -createjar -srcdir dist -appclass test.Fish -srcfiles fish.jar -outdir dist -outfile fish.jar  And here is example of using <fx:jar> to create new JavaFX executable jar from the existing fish_proto.jar: <fx:jar destfile="dist/fish.jar"> <fileset dir="dist"> <include name="fish_proto.jar"/> </fileset> </fx:jar> Self-Contained Applications: Specify application icon The only way to specify application icon for self-contained application using tools in JDK 7 update 6 is to use drop-in resources. Now this bug is resolved and you can also specify icon using <fx:icon> tag. Here is an example: <fx:deploy ...> <fx:info> <fx:icon href="default.png"/> </fx:info> ... </fx:deploy> Few things to keep in mind: Only default kind of icon is applicable to self-contained applications (as of now) Icon should follow platform specific rules for sizes and image format (e.g. .ico on Windows and .icns on Mac) Self-Contained Applications: Pass parameters on the command line JavaFX applications support two types of application parameters: named and unnamed (see the API for Application.Parameters). Static named parameters can be added to the application package using <fx:param> and unnamed parameters can be added using <fx:argument>. They are applicable to all execution modes including standalone applications. It is also possible to pass parameters to a JavaFX application from a Web page that hosts it, using <fx:htmlParam>.  Prior to JavaFX 2.2, this was only supported for embedded applications. Starting from JavaFX 2.2, <fx:htmlParam> is applicable to Web Start applications also. See JavaFX deployment guide for more details on this. However, there was no way to pass dynamic parameters to the self-contained application. This has been improved and now native launchers will  delegate parameters from command line to the application code. I.e. to pass parameter to the application you simply need to run it as "myapp.exe somevalue" and then use getParameters().getUnnamed().get(0) to get "somevalue".

    Read the article

  • How to use Bonjour?

    - by Roman
    First, what exactly Bonjour does (pleas read my guesses written bellow)? Here I found out that Bonjour enables automatic discovery of computers, devices, and services on IP networks. But I thought that it not only "discovers devices on IP network" it also creates an IP network by assigning IP addresses to devices where Bonjour is running. Am I right? And I still miss the essence. Does it work in the following way? First I connect devices (for example laptops) physically so that they potentially can communicate with each other. Then, let say, on some laptops I have Bonjour running and then, as a consequence, these laptops assign IP addresses to them self in automatic way. So, laptops (where Bonjour is running) build an IP network. Does it work in this way? Or may be a computer running Bonjour is not considered as a service and it does not broadcast itself just because Bonjour is running on this computer. I mean that the applications running on the computers need to use Bonjour to broadcast themself. So, it is applications that broadcast themself (not computers) and it is not done automatically (application needs to broadcast themself explicitly). Is it right? How exactly my application can broadcast itself? Can I use command line to register an service (so that all applications using Bonjour knows that a new service appeared)? Further, I would like to have an application which use the IP network created by Bonjour. For that my application needs to know which devices/services are present in the network. In more details, my application needs to have a list of services. Each service in the list should have a name, the IP address where it is running and the port which is used by the application. Can Bonjour provide this information in some way? If it is the case, how exactly it works. How my program can get this information from Bonjour? Can my program read some file created by Bonjour and containing the above mentioned information? Can I use some commands in command line to retrieve this information? I have a special interest in accessing the information about services from files, environment variables or commands in command line. These options seems to me to be the simplest! Since in these case I do not need to use any additional libraries to communicate with Bonjour from a particular programming language. P.S. Pleas ask questions if something is not clear in my question. I will try to formulate my question in a more clear way. P.P.S. I use Windows 7. ADDED: I plan to write my applications in PHP. Every computer should run a Apache web server. And I want to use Bonjour to help computer discover each other (computers are working in a local network).

    Read the article

  • Play music on iPhone through computer

    - by Kyle Cronin
    Now that I've had my iPhone for a few months, I'm trying an experiment to see if I can't replace the laptop I carry around with my iPhone + internet connected computer. To this end, I've been trying to find a program that will let me play the music on my iPhone through the hardware and software on the host computer. If I recall correctly this was possible a few years ago with the iPod - Linux software like Rhythmbox and Banshee was able to read the music off an iPod and play it through the speakers. I even thought I recalled iTunes itself being capable of this at one time. Now, however, iTunes greys out/disables the music on my iPhone and I can't find any documented support for the iPhone in any other music program. Is this really no longer possible? Am I limited to using the headphone jack to get music to play? (note: I am using an iPhone 3G with the 3.0 software. I am attempting to play music on computers other than the one I sync with) Several replies mention that I should check "manually manage" to do this. I just tried this on a computer that I don't sync my iPhone to and it asked me to erase and sync, which is obviously something I don't want to do. update: OK, I checked the "Manually manage music and videos" box on a computer that I didn't sync to (now known as "Computer A"), and it told me that I needed to erase & sync to cause the changes to have effect, so I did. At this point I'm guessing that my iPhone thinks that it's syncing with that computer. I copied over a few songs using the autofill feature. At this point, Computer A sees the maybe 10 or so songs I've copied using autofill. I then plug my iPhone into my Macbook ("Computer B") which I've been syncing with. At this point, I'm pretty sure that it still thought that all my synced content was still on my iPhone. The "manually manage music and videos" checkbox isn't checked, so I check it and go through a similar process where iTunes erases the synced content and I copy over a playlist. At this point, there's no trace of the songs that I copied over from Computer A. So I plug my iPhone into Computer A - in the Music section are the handful of songs that I had copied over earlier, greyed out and unplayable. To make sure that this wasn't some sort of caching issue, I plugged my iPhone into my sister's Macbook ("Computer C") and it lists the same few, greyed out songs that I had copied over from Computer A. Plugging into Computer B doesn't reveal these songs at all, only the songs that it copied over (these are playable). A few things: This inconsistent behavior is driving me insane. Why would my iPhone report two versions of its contents to different computers? Is there a way to get a computer to completely forget about an iPhone and just resync everything to get everything into a consistent state? Even if I get the phone into a consistent state, I still can't play the files on my phone anywhere but the computer I sync with, which was my original goal. What am I doing wrong? maybe I should read the fine print before I mess with my iPhone So going over this thread with a fine-toothed comb again yields this lovely tidbit in the Apple docs: Note: Even when manually managing, some content may only be available from one library at time. This includes all content on iPhone and video content on iPods. OK, so manually managing is a dead end on the iPhone. Are there any other options? Any unofficial third-party programs or drivers that will work?

    Read the article

  • svnstat script

    - by Kyle Hodgson
    So I'm building out a shell script to check out all of our relevant svn repositories for analysis in svnstat. I've gotten all of this to work manually, now I'm writing up a bash script in cygwin on my Vista laptop, as I intend to move this to a Linux server at some point. Edit: I gave up on this and wrote a simple .bat script. I'll figure out the Linux deployment some other way. Edit: added the sleep 30 and svn log commands. I can tell now, with the svn log command, that it's not getting to the svn log ... this time, it did Applications, and ran the log, and then check out Database, and froze. I'll put the sleep 30 before and after the log this time. co2.sh #!/bin/bash function checkout { mkdir $1 svn checkout svn://dev-server/$1 $1 svn log --verbose --xml >> svn.log $1 sleep 30 } cd /cygdrive/c/Users/My\ User/Documents/Repos/wc checkout Applications checkout Database checkout WebServer/www.mysite.com checkout WebServer/anotherhost.mysite.com checkout WebServer/AnotherApp checkout WebServer/thirdhost.mysite.com checkout WebServer/fourthhost.mysite.com checkout WebServer/WebServices It works, for the most part - but for some reason it has a tendency to stop working after a few repositories, usually right after finishing a repository before going to the next one. When it fails, it will not recover on its own. I've tried commenting out the svn line, it goes in and creates all the directories just fine when I do that - so its not that. I'm looking for direction as well as direct advice. Cygwin has been very stable for me, but I did start using the native rxvt instead of "bash in a cmd.exe window" recently. I don't think that's the problem, as I've left top on remote systems running all night and rxvt didn't seem to mind. Also I haven't done any bash scripting in cygwin so I suppose this might not be recommended; though I can't see why not. I don't want all of WebServer, hence me only checking out certain folders like that. What I suspect is that something is hanging up the svn checkout. Any ideas here? Edit: this time when I hit ctrl+z to cancel out, I forgot I was on Windows and typed ps to see if the job was still running; and as you can see there are lots of svn processes hanging around... strange. Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [1]- Stopped bash co2.sh [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ kill %1 [1]- Stopped bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ [1]- Terminated bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ ps PID PPID PGID WINPID TTY UID STIME COMMAND 7872 1 7872 2340 0 1000 Jun 29 /usr/bin/svn 7752 1 6140 7828 1 1000 Jun 29 /usr/bin/svn 6192 1 5044 2192 1 1000 Jun 30 /usr/bin/svn 7292 1 7452 1796 1 1000 Jun 30 /usr/bin/svn 6236 1 7304 7468 2 1000 Jul 2 /usr/bin/svn 1564 1 5032 7144 2 1000 Jul 2 /usr/bin/svn 9072 1 3960 6276 3 1000 Jul 3 /usr/bin/svn 5876 1 5876 5876 con 1000 11:22:10 /usr/bin/rxvt 924 5876 924 10192 4 1000 11:22:10 /usr/bin/bash 7212 1 7332 5584 4 1000 13:17:54 /usr/bin/svn 9412 1 5480 8840 4 1000 15:38:16 /usr/bin/svn S 8128 924 8128 9452 4 1000 17:38:05 /usr/bin/bash 9132 8128 8128 8172 4 1000 17:43:25 /usr/bin/svn 3512 1 3512 3512 con 1000 17:43:50 /usr/bin/rxvt I 10200 3512 10200 6616 5 1000 17:43:51 /usr/bin/bash 9732 1 9732 9732 con 1000 17:45:55 /usr/bin/rxvt 3148 9732 3148 8976 6 1000 17:45:55 /usr/bin/bash 5856 3148 5856 876 6 1000 17:51:00 /usr/bin/vim 7736 924 7736 8036 4 1000 17:53:26 /usr/bin/ps Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Here's an strace on the PID of the hung svn program, it's been like this for hours. Looks like its just doing nothing. I keep suspecting that some interruption on the server is causing this; does svn have a locking mechanism I'm not aware of? Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ strace -p 7304 ********************************************** Program name: C:\cygwin\bin\svn.exe (pid 7304, ppid 6408) App version: 1005.25, api: 0.156 DLL version: 1005.25, api: 0.156 DLL build: 2008-06-12 19:34 OS version: Windows NT-6.0 Heap size: 402653184 Date/Time: 2009-07-06 18:20:11 **********************************************

    Read the article

  • Monit won't run

    - by Yaniro
    I have two identical EC2 instances (the second is a replica of the first), running Gentoo. The first instance has monit running which monitors a single process and some system resources and functions great. In the second instance, monit runs but quits right away. The configuration is similar on both instances so are the versions of monit. monit.log shows: [GMT Oct 3 08:36:41] info : monit daemon with PID 5 awakened Final lines on strace monit show: write(2, "monit daemon with PID 5 awakened"..., 33monit daemon with PID 5 awakened ) = 33 time(NULL) = 1349252827 open("/etc/localtime", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb773a000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0\0\0\0"..., 4096) = 118 _llseek(4, -6, [112], SEEK_CUR) = 0 read(4, "\nGMT0\n", 4096) = 6 close(4) = 0 munmap(0xb773a000, 4096) = 0 write(3, "[GMT Oct 3 08:27:07] info :"..., 33) = 33 write(3, "monit daemon with PID 5 awakened"..., 33) = 33 waitpid(-1, NULL, WNOHANG) = -1 ECHILD (No child processes) close(3) = 0 exit_group(0) = ? No core dumps (ulimit -c shows unlimited) monit -v shows: monit: Debug: Adding host allow 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Adding credentials for user 'xxxx'. Runtime constants: Control file = /etc/monitrc Log file = /var/log/monit/monit.log Pid file = /var/run/monit.pid Id file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 30 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/monit with 100 slots Mail server(s) = xx.xxx.xx.xxx with timeout 30 seconds Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication and Host/Net allow list Alert mail to = [email protected] Alert on = All events The service list contains the following entries: System Name = xxxx Monitoring mode = active CPU wait limit = if greater than 20.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU system limit = if greater than 30.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU user limit = if greater than 70.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Swap usage limit = if greater than 25.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Memory usage limit = if greater than 75.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (5min) = if greater than 2.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (1min) = if greater than 4.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Process Name = xxxx Group = server Pid file = /var/run/xxxx.pid Monitoring mode = active Start program = '/etc/init.d/xxxx restart' timeout 20 second(s) Stop program = '/etc/init.d/xxxx stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Timeout = If restarted 3 times within 5 cycle(s) then unmonitor Alert mail to = [email protected] Alert on = All events Alert mail to = [email protected] Alert on = All events ------------------------------------------------------------------------------- monit daemon with PID 5 awakened Ran emerge --sync before emerge -va monit which installed monit v5.3.2. When that didn't work i've downloaded v5.5 from their website and compiled from source which did not work either.

    Read the article

  • Need help merging 2 AHK scripts

    - by Mikey
    i have two functioning scripts that i want to merge into a single AHK File. My problem is that when i combine both scripts, the second script doesnt function or causes an error on script 1. Either way, script 2 ist not functioning at all. Here are some facts: Script 1 = a simple menu script where i want to assign hotkeys to. Script 2 = A small launcher script from a user named Tertius in autohotkey forum. Can someone please look at both codes and help me merge this? The INI File for script 2 looks like this: Keywords.ini npff|Firefox|Firefox gm|Gmail|http://gmail.google.com ;;;;;;;;;;;; BEGIN SCRIPT 2 DetectHiddenWindows, On SetWinDelay, -1 SetKeyDelay, -1 SetBatchLines, -1 GoSub Remin SetTimer, Remin, % 1000 * 60 Loop, read, %A_ScriptDir%\keywords.ini { LineNumber = %A_Index% Loop, parse, A_LoopReadLine, | { if (A_Index == 1) abbrevs%LineNumber% := A_LoopField else if (A_Index == 2) tips%LineNumber% := A_LoopField else if (A_Index == 3) programs%LineNumber% := A_LoopField else if (A_Index == 4) params%LineNumber% := A_LoopField } tosay := abbrevs%LineNumber% } cnt = %LineNumber% Loop { Input, Key, L1 V, % "{LControl}{RControl}{LAlt}{RAlt}{LShift}{RShift}{LWin}{RWin}" . "{AppsKey}{F1}{F2}{F3}{F4}{F5}{F6}{F7}{F8}{F9}{F10}{F11}{F12}{Left}{Right}{Up}{Down}" . "{Home}{End}{PgUp}{PgDn}{Del}{Ins}{BS}{Capslock}{Numlock}{PrintScreen}{Pause}{Escape}" If( ( Asc(Key) = 65 && Asc(Key) <= 90 ) || ( Asc(Key) = 97 && Asc(Key) <= 122 ) ) Word .= Key Else { Word := "" Continue } tipup := false Loop %cnt% { if (Word == abbrevs%A_index%) { tip := tips%A_index% ToolTip %tip% tipup := true } else { if (tipup == false) ToolTip } } } $Tab:: Loop %cnt% { if (Word != "" && Word == abbrevs%A_index%) { Word := "" StringLen, len, abbrevs%A_index% Loop %len% Send {Shift Down}{Left} Send {Shift Up}{BS} ToolTip program := programs%A_index% param := params%A_index% run, %program% %param% return } } Word := "" Send {Tab} Return ~LButton:: ~MButton:: ~RButton:: ~XButton1:: ~XButton2:: Word := "" Tooltip Return Remin: WinMinimize, %A_ScriptFullPath% - AutoHotkey v WinHide, %A_ScriptFullPath% - AutoHotkey v Return ;;;;;;;;;; END SCRIPT 2 ;;;;;;;;;;;;;; BEGIN SCRIPT 1 ;This is a working script that creates a popup menu. ; Create the popup menu by adding some items to it. Menu, MyMenu, Add, FIS 201, MenuHandler Menu, MyMenu, Add ; Add a separator line. Menu, MyMenu, Color, Lime, Single ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu1, Add, Item2, MenuHandler Menu, Submenu1, Add, Item3, MenuHandler Menu, Submenu1, Color, Yellow ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu2, Add, Item1a, MenuHandler Menu, Submenu2, Add, Item2a, MenuHandler Menu, Submenu2, Add, Item3a, MenuHandler Menu, Submenu2, Add, Item4a, MenuHandler Menu, Submenu2, Add, Item5a, MenuHandler Menu, Submenu2, Add, Item6a, MenuHandler Menu, Submenu2, Color, Aqua ;Define the Menu Color ; Create a submenu in the first menu (a right-arrow indicator). When the user selects it, the second menu is displayed. Menu, MyMenu, Add, BKRS 119, :Submenu1 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, BKRS 201, :Submenu2 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, Google Search, Google ; Add another menu item beneath the submenu. return ; End of script's auto-execute section. Capslock & LButton::Menu, MyMenu, Show ; i.e. press the Win-Z hotkey to show the menu. MenuHandler: MsgBox You selected %A_ThisMenuItem% from the menu %A_ThisMenu%. return ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;; Google Search ;;; FORMAT InputBox, OutputVar [, Title, Prompt, HIDE, Width, Height, X, Y, Font, Timeout, Default] Google: InputBox, SearchTerm, Google Search,,,350, 120 if SearchTerm < "" Run http://www.google.de/search?sclient=psy-ab&hl=de&site=&source=hp&q=%SearchTerm%&btnG=Suche return ; Make Window Transparent Space::WinSet, Transparent, 125, A ^!Space UP::WinSet, Transparent, OFF, A return ;;;;;;;;;;; END SCRIPT 1 Help is appreciated. Kind Regards, Mikey

    Read the article

  • ERROR 2003 (HY000): Can't connect to MySQL server on (111)

    - by JohnMerlino
    I am unable to connect to on my ubuntu installation a remote tcp/ip which contains a mysql installation: viggy@ubuntu:~$ mysql -u user.name -p -h xxx.xxx.xxx.xxx -P 3306 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111) I commented out the line below using vim in /etc/mysql/my.cnf: # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 Then I restarted the server: sudo service mysql restart But still I get the same error. This is the content of my.cnf: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ (Note that I can log into my local mysql install just fine by running mysql (and it will log me in as root) and also note that I can get into mysql in the remote server by logging into via ssh and then invoking mysql), but I am unable to connect to the remote server via my terminal using the host, and I need to do it that way so that I can then use mysql workbench.

    Read the article

  • install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly

    - by boldnik
    ...using Linux (xubuntu). How to install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly ? My final aim is to have them working. The problem: ~$ python --version Python 2.7.3 so i already have a system-default 2.7.3, which is good! ~$ dpkg -s python-numpy Package: python-numpy Status: install ok installed and i already have numpy installed! great! But... ~$ python Python 2.7.3 (default, Oct 23 2012, 01:07:38) [GCC 4.6.1] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import numpy as nmp Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named numpy this module couldn't be find by python. The same with scipy, matplotlib. Why? ~$ sudo apt-get install python-numpy [...] Reading package lists... Done Building dependency tree Reading state information... Done python-numpy is already the newest version. [...] why it does not see numpy and others ? update: >>> import sys >>> print sys.path ['', '/usr/local/lib/python27.zip', '/usr/local/lib/python2.7', '/usr/local/lib/python2.7/plat-linux2', '/usr/local/lib/python2.7/lib-tk', '/usr/local/lib/python2.7/lib-old', '/usr/local/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/site-packages'] >>> so i do have /usr/local/lib/python2.7 ~$ pip freeze Warning: cannot find svn location for distribute==0.6.16dev-r0 BzrTools==2.4.0 CDApplet==1.0 [...] matplotlib==1.0.1 mutagen==1.19 numpy==1.5.1 [...] pandas==0.7.3 papyon==0.5.5 [...] pytz==2012g pyxdg==0.19 reportlab==2.5 scikits.statsmodels==0.3.1 scipy==0.11.0 [...] zope.interface==3.6.1 as you can see, those modules are already installed! But! ls -la /usr/local/lib/ gives ONLY python2.7 dir. And still ~$ python -V Python 2.7.3 and import sys sys.version '2.7.3 (default, Oct 23 2012, 01:07:38) \n[GCC 4.6.1]' updated: Probably I've missed another instance... One at /usr/Python-2.7.3/ and second (seems to be installed "by hands" far far ago) at /usr/python2.7.3/Python-2.7.3/ But how two identical versions can work at the same time??? Probably, one of them is "disabled" (not used by any program, but I don't know how to check if any program uses it). ~$ ls -la /usr/bin/python* lrwxrwxrwx 1 root root 9 2011-11-01 11:11 /usr/bin/python -> python2.7 -rwxr-xr-x 1 root root 2476800 2012-09-28 19:48 /usr/bin/python2.6 -rwxr-xr-x 1 root root 1452 2012-09-28 19:45 /usr/bin/python2.6-config -rwxr-xr-x 1 root root 2586060 2012-07-21 01:42 /usr/bin/python2.7 -rwxr-xr-x 1 root root 1652 2012-07-21 01:40 /usr/bin/python2.7-config lrwxrwxrwx 1 root root 9 2011-10-05 23:53 /usr/bin/python3 -> python3.2 lrwxrwxrwx 1 root root 11 2011-09-06 02:04 /usr/bin/python3.2 -> python3.2mu -rwxr-xr-x 1 root root 2852896 2011-09-06 02:04 /usr/bin/python3.2mu lrwxrwxrwx 1 root root 16 2011-10-08 19:50 /usr/bin/python-config -> python2.7-config there is a symlink python-python2.7, maybe I can ln -f -s this link to exact /usr/Python-2.7.3/python destination without harm ?? And how correctly to remove the 'copy' of 2.7.3?

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • How do I get my ubuntu server to listen for database connections?

    - by Bob Flemming
    I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

    Read the article

  • Apache mod_jk Setting for Tomcat - workers.properties

    - by sissonb
    I am trying to direct files with .jsp extensions to tomcat. Otherwise I want apache to serve the file directly (no tomcat). Currently I have a test.jsp which is supposed to create an HTML page with the current date in the body. Instead when I go to that .jsp I see the JK Status Manager. The mod_jk.logs only show, init_jk::mod_jk.c (3365): mod_jk/1.2.35 initialized. I have tomcat and apache setup on my server. Apache runs on 80 and tomcat runs on 8080. localhost:8080 show the tomcat welcome page. I downloaded tomcat-connectors-1.2.35-windows-i386-httpd-2.2.x and copied the mod_jk.so to C:\apache\modules. Then I added LoadModule jk_module modules/mod_jk.so to my httpd.conf. I restart apache and the module loads just fine. Next I downloaded the mod_jk source to get the workers.properties file. I copy workers.properties to C:\apache\confg. Then I added this user, workers.tomcat_home="C:/Program Files/Apache Software Foundation/Tomcat 7.0" workers.java_home="C:/Program Files/Java/jdk1.7.0_03" worker.list=ajp13 worker.ajp13.port=8080 worker.ajp13.host=localhost worker.ajp13.type=ajp13 worker.ajp13.socket_timeout=10 When I try to use the ajp13 user in my httpd.conf I get the following error in my mod_jk.log, [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1258): (ajp13) can't receive the response header message from tomcat, network problems or tomcat (127.0.0.1:8080) is down (errno=60) [Wed Mar 28 13:08:51 2012] [2196:4100] [error] ajp_get_reply::jk_ajp_common.c (2117): (ajp13) Tomcat is down or refused connection. No response has been sent to the client (yet) [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_service::jk_ajp_common.c (2614): (ajp13) sending request to tomcat failed (recoverable), (attempt=1) Next I update my httpd.conf with, JkWorkersFile C:/apache/conf/workers.properties JkLogFile C:/apache/logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " Also I added JkMount /*.jsp jk-status to my virtual host like this, <VirtualHost 192.168.5.250:80> JkMount /*.jsp jk-status #JkMount /*.jsp ajp13 ServerName bgsisson.com ServerAlias www.bgsisson.com DocumentRoot C:/www/resume </VirtualHost> I think i need to include a uriworkermap.properties file, but this is where I am getting stuck. I have put up a test .jsp at bgsisson.com/test.jsp It shows the JK Status Manager when I use JkMount /*.jsp jk-status and 502 Bad Gateway when I use JkMount /*.jsp ajp13 test.jsp <%-- use the 'taglib' directive to make the JSTL 1.0 core tags available; use the uri "http://java.sun.com/jsp/jstl/core" for JSTL 1.1 --%> <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %> <%-- use the 'jsp:useBean' standard action to create the Date object; the object is set as an attribute in page scope --%> <jsp:useBean id="date" class="java.util.Date" /> <html> <head><title>First JSP</title></head> <body> <h2>Here is today's date</h2> <c:out value="${date}" /> </body> </html>

    Read the article

  • Logging to MySQL without empty rows/skipped records?

    - by Lee Ward
    I'm trying to figure out how to make Squid proxy log to MySQL. I know ACL order is pretty important but I'm not sure if I understand exactly what ACLs are or do, it's difficult to explain, but hopefully you'll see where I'm going with this as you read! I have created the lines to make Squid interact with a helper in squid.conf as follows: external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log The external ACL helper (mysql_lg.php) is a PHP script and is as follows: error_reporting(0); if (! defined(STDIN)) { define("STDIN", fopen("php://stdin", "r")); } $res = mysql_connect('localhost', 'squid', 'testsquidpw'); $dbres = mysql_select_db('squid', $res); while (!feof(STDIN)) { $line = trim(fgets(STDIN)); $fields = explode(' ', $line); $user = rawurldecode($fields[0]); $cli_ip = rawurldecode($fields[1]); $protocol = rawurldecode($fields[2]); $uri = rawurldecode($fields[3]); $q = "INSERT INTO logs (id, user, cli_ip, protocol, url) VALUES ('', '".$user."', '".$cli_ip."', '".$protocol."', '".$uri."');"; mysql_query($q) or die (mysql_error()); if ($fault) { fwrite(STDOUT, "ERR\n"); }; fwrite(STDOUT, "OK\n"); } The configuration I have right now looks like this: ## Authentication Handler auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 30 auth_param negotiate program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-basic auth_param negotiate children 5 # Allow squid to update log external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log acl localnet src 172.16.45.0/24 acl AuthorizedUsers proxy_auth REQUIRED acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl CONNECT method CONNECT acl blockeddomain url_regex "/etc/squid3/bl.acl" http_access deny blockeddomain deny_info ERR_BAD_GENERAL blockeddomain # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # Allow the internal network access to this proxy http_access allow localnet # Allow authorized users access to this proxy http_access allow AuthorizedUsers # FINAL RULE - Deny all other access to this proxy http_access deny all From testing, the closer to the bottom I place the logging lines the less it logs. Oftentimes, it even places empty rows in to the MySQL table. The file-based logs in /var/log/squid3/access.log are correct but many of the rows in the access logs are missing from the MySQL logs. I can't help but think it's down to the order I'm putting lines in because I want to log everything to MySQL, unauthenticated requests, blocked requests, which category blocked a specific request. The reason I want this in MySQL is because I'm trying to have everything managed via a custom web-based frontend and want to avoid using any shell commands and access to system log files if I can help it. The end result is to make it as easy as possible to maintain without keeping staff waiting on the phone whilst I add a new rule and reload the server! Hopefully someone can help me out here because this is very much a learning experience for me and I'm pretty stumped. Many thanks in advance for any help!

    Read the article

  • GNU/Linux swapping blocks system

    - by Ole Tange
    I have used GNU/Linux on systems from 4 MB RAM to 512 GB RAM. When they start swapping, most of the time you can still log in and kill off the offending process - you just have to be 100-1000 times more patient. On my new 32 GB system that has changed: It blocks when it starts swapping. Sometimes with full disk activity but other times with no disk activity. To examine what might be the issue I have written this program. The idea is: 1 grab 3% of the memory free right now 2 if that caused swap to increase: stop 3 keep the chunk used for 30 seconds by forking off 4 goto 1 - #!/usr/bin/perl sub freekb { my $free = `free|grep buffers/cache`; my @a=split / +/,$free; return $a[3]; } sub swapkb { my $swap = `free|grep Swap:`; my @a=split / +/,$swap; return $a[2]; } my $swap = swapkb(); my $lastswap = $swap; my $free; while($lastswap >= $swap) { print "$swap $free"; $lastswap = $swap; $swap = swapkb(); $free = freekb(); my $used_mem = "x"x(1024 * $free * 0.03); if(not fork()) { sleep 30; exit(); } } print "Swap increased $swap $lastswap\n"; Running the program forever ought to keep the system at the limit of swapping, but only grabbing a minimal amount of swap and do that very slowly (i.e. a few MB at a time at most). If I run: forever free | stdbuf -o0 timestamp > freelog I ought to see swap slowly rising every second. (forever and timestamp from https://github.com/ole-tange/tangetools). But that is not the behaviour I see: I see swap increasing in jumps and that the system is completely blocked during these jumps. Here the system is blocked for 30 seconds with the swap usage increases with 1 GB: secs 169.527 Swap: 18440184 154184 18286000 170.531 Swap: 18440184 154184 18286000 200.630 Swap: 18440184 1134240 17305944 210.259 Swap: 18440184 1076228 17363956 Blocked: 21 secs. Swap increase 2400 MB: 307.773 Swap: 18440184 581324 17858860 308.799 Swap: 18440184 597676 17842508 330.103 Swap: 18440184 2503020 15937164 331.106 Swap: 18440184 2502936 15937248 Blocked: 20 secs. Swap increase 2200 MB: 751.283 Swap: 18440184 885288 17554896 752.286 Swap: 18440184 911676 17528508 772.331 Swap: 18440184 3193532 15246652 773.333 Swap: 18440184 1404540 17035644 Blocked: 37 secs. Swap increase 2400 MB: 904.068 Swap: 18440184 613108 17827076 905.072 Swap: 18440184 610368 17829816 942.424 Swap: 18440184 3014668 15425516 942.610 Swap: 18440184 2073580 16366604 This is bad enough, but what is even worse is that the system sometimes stops responding at all - even if I wait for hours. I have the feeling it is related to the swapping issue, but I cannot tell for sure. My first idea was to tweak /proc/sys/vm/swappiness from 60 to 0 or 100, just to see if that had any effect at all. 0 did not have an effect, but 100 did cause the problem to arise less often. How can I prevent the system from blocking for such a long time? Why does it decide to swapout 1-3 GB when less than 10 MB would suffice?

    Read the article

  • BSOD & System Failure after trying to install a new RAM

    - by Praveen Kumar
    I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

    Read the article

  • reiserfsck on lvm

    - by DaDaDom
    It seems like my filesystem got corrupted somehow during the last reboot of my server. I can't fsck some logical volumes anymore. The setup: root@rescue ~ # cat /mnt/rescue/etc/fstab proc /proc proc defaults 0 0 /dev/md0 /boot ext3 defaults 0 2 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/systemlvm/home /home reiserfs defaults 0 0 /dev/systemlvm/usr /usr reiserfs defaults 0 0 /dev/systemlvm/var /var reiserfs defaults 0 0 /dev/systemlvm/tmp /tmp reiserfs noexec,nosuid 0 2 /dev/sda5 none swap defaults,pri=1 0 0 /dev/sdb5 none swap defaults,pri=1 0 0 [UPDATE] First question: what "part" should I check for bad blocks? The logical volume, the underlying /dev/md or the /dev/sdx below that? Is doing what I am doing the right way to go? [/UPDATE] The errormessage when checking /dev/systemlvm/usr: root@rescue ~ # reiserfsck /dev/systemlvm/usr reiserfsck 3.6.19 (2003 www.namesys.com) [...] Will read-only check consistency of the filesystem on /dev/systemlvm/usr Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --check started at Wed Feb 3 07:10:55 2010 ########### Replaying journal.. Reiserfs journal '/dev/systemlvm/usr' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. Bad root block 0. (--rebuild-tree did not complete) Aborted Well so far, let's try --rebuild-tree: root@rescue ~ # reiserfsck --rebuild-tree /dev/systemlvm/usr reiserfsck 3.6.19 (2003 www.namesys.com) [...] Will rebuild the filesystem (/dev/systemlvm/usr) tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes Replaying journal.. Reiserfs journal '/dev/systemlvm/usr' in blocks [18..8211]: 0 transactions replayed ########### reiserfsck --rebuild-tree started at Wed Feb 3 07:12:27 2010 ########### Pass 0: ####### Pass 0 ####### Loading on-disk bitmap .. ok, 269716 blocks marked used Skipping 8250 blocks (super block, journal, bitmaps) 261466 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 11368 /sec 52919 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 261466 Leaves among those 13086 Objectids found 53697 Pass 1 (will try to insert 13086 leaves): ####### Pass 1 ####### Looking for allocable blocks .. finished 0% left 12675, 0 /sec The problem has occurred looks like a hardware problem (perhaps memory). Send us the bug report only if the second run dies at the same place with the same block number. mark_block_used: (39508) used already Aborted Bad. But let's do it again as mentioned: [...] Flushing..finished Read blocks (but not data blocks) 261466 Leaves among those 13085 Objectids found 54305 Pass 1 (will try to insert 13085 leaves): ####### Pass 1 ####### Looking for allocable blocks .. finished 0%... left 12127, 958 /sec The problem has occurred looks like a hardware problem (perhaps memory). Send us the bug report only if the second run dies at the same place with the same block number. build_the_tree: Nothing but leaves are expected. Block 196736 - internal Aborted Same happens every time, only the actual error message changes. Sometimes I get mark_block_used: (somenumber) used already, other times the block number changes. Seems like something is REALLY broken. Are there any chances I can somehow get the partitions to work again? It's a server to which I don't have physical access directly (hosted server). Thanks in advance!

    Read the article

  • Process not Listed by PS or in /proc/

    - by Hammer Bro.
    I'm trying to figure out how to operate a rather large Java program, 'prog'. If I go to its /bin/ dir and configure its setenv.sh and prog.sh to use local directories and my current user account. Then I try to run it via "./prog.sh start". Here are all the relevant bits of prog.sh: USER=(my current account) _CMD="/opt/jdk/bin/java -server -Xmx768m -classpath "${CLASSPATH}" -jar "${DIR}/prog.jar"" case "${ACTION}" in start) nohup su ${USER} -c "exec ${_CMD} >>${_LOGFILE} 2>&1" >/dev/null & echo $! >${_PID} echo "Prog running. PID="`cat ${_PID}` ;; stop) PID=`cat ${_PID} 2>/dev/null` echo "Shutting down prog: ${PID} kill -QUIT ${PID} 2>/dev/null kill ${PID} 2>/dev/null kill -KILL ${PID} 2>/dev/null rm -f ${_PID} echo "STOPPED `date`" >>${_LOGFILE} ;; When I actually do ./prog.sh start, it starts. But I can't find it at all on the process list. Nor can I kill it manually, using the same command the shell script uses. But I can tell it's running, because if I do ./prog.sh stop, it stops (and some temporary files elsewhere clean themselves out). ./prog.sh start Prog running. PID=1234 ps eaux | grep 1234 ps eaux | grep -i prog.jar ps eaux >> pslist.txt (It's not there either by PID or any clear name I can find: prog, java or jar.) cd /proc/1234/ -bash: cd: /proc/1234/: No such file or directory kill -QUIT 1234 kill 1234 kill -KILL 1234 -bash: kill: (1234) - No such process ./prog.sh stop Shutting down prog: 1234 As far as I can tell, the process is running yet not in any way listed by the system. I can't find it in ps or /proc/, nor can I kill it. But the shell script can still stop it properly. So my question is, how can something like this happen? Is the process supremely hidden, actually unlisted, or am I just missing it in some fashion? I'm trying to figure out what makes this program tick, and I can barely prove that it's ticking! Edit: ps eu | grep prog.sh (after having restarted; so random PID) 50038 19381 0.0 0.0 4412 632 pts/3 S+ 16:09 0:00 grep prog.sh HOSTNAME=machine.server.com TERM=vt100 SHELL=/bin/bash HISTSIZE=1000 SSH_CLIENT=::[STUFF] 1754 22 CVSROOT=:[DIR] SSH_TTY=/dev/pts/3 ANT_HOME=/opt/apache-ant-1.7.1 USER=[USER] LS_COLORS=[COLORS] SSH_AUTH_SOCK=[DIR] KDEDIR=/usr MAIL=[DIR] PATH=[DIRS] INPUTRC=/etc/inputrc PWD=[PWD] JAVA_HOME=/opt/jdk1.6.0_21 LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass M2_HOME=/opt/apache-maven-2.2.1 SHLVL=1 HOME=[~] LOGNAME=[USER] SSH_CONNECTION=::[STUFF] LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/grep OLDPWD=[DIR] I just realized that the stop) part of prog.sh isn't actually a guarantee that the process it claims to be stopping is running -- it just tries to kill the PID and suppresses all output then deletes the temporary file and manually inserts STOPPED into the log file. So I'm no longer so certain that the process is always running when I ps for it, although the code sample above indicates that it at least runs erratically. I'll continue looking into this undocumented behemoth when I return to work tomorrow.

    Read the article

  • Bugzilla : No SASL mechanism found

    - by niteshsinha
    I am using Bugzilla on windows 7. I am using the unofficial Bugzilla installer. I followed the steps accordingly and gave valid credentials wherever required. I open Bugzilla and try to create a new account , but i get the following error. Software error: No SASL mechanism found at C:/Program Files/Bugzilla/perl/perl/site/lib/Authen/SASL.pm line 77 at C:/Program Files/Bugzilla/perl/perl/lib/Net/SMTP.pm line 143 i ran checksetup.pl and found that Authen::SASL and SMTP both are available on my machine. The output of checksetup.pl is as follows. * This is Bugzilla 3.6.3 on perl 5.10.1 * Running on Win7 Build 7600 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.49 Checking for Digest-SHA (any) ok: found v5.48 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.53 Checking for DateTime-TimeZone (v0.79) ok: found v1.10 Checking for DBI (v1.41) ok: found v1.609 Checking for Template-Toolkit (v2.22) ok: found v2.22 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.861) ok: found v1.903 Checking for Email-MIME-Encodings (v1.313) ok: found v1.313 Checking for Email-MIME-Modifier (v1.442) ok: found v1.903 Checking for URI (any) ok: found v1.52 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.16.1 Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for DBD-Oracle (v1.19) not found The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.44 Checking for Chart (v2.1) ok: found v2.4.1 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for XML-Twig (any) ok: found v3.34 Checking for MIME-tools (v5.406) ok: found v5.427 Checking for libwww-perl (any) ok: found v5.834 Checking for PatchReader (v0.9.4) ok: found v0.9.5 Checking for perl-ldap (any) ok: found v0.39 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.17 Checking for SOAP-Lite (v0.710.06) ok: found v0.710.10 Checking for JSON-RPC (any) ok: found v0.95 Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.40) ok: found v3.64 Checking for HTML-Scrubber (any) ok: found v0.08 Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * *********************************************************************** * Note For Windows Users * *********************************************************************** * In order to install the modules listed below, you first have to run * * the following command as an Administrator: * * * * ppm repo add theory58S http://cpan.uwinnipeg.ca/PPMPackages/10xx/ * * * Then you have to do (also as an Administrator): * * * * ppm repo up theory58S * * * * Do that last command over and over until you see "theory58S" at the * * top of the displayed list. * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Reading ./localconfig... Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for MySQL (v4.1.2) ok: found v5.1.44-community-log Removing existing compiled templates... Precompiling templates...done. Now that you have installed Bugzilla, you should visit the 'Parameters' page (linked in the footer of the Administrator account) to ensure it is set up as you wish - this includes setting the 'urlbase' option to the correct URL. Press any key to continue . . . Please tell me what should i do. Please note: i am running behind a corporate proxy , SSL/TLS is not used internally but i am giving the smtpUser and smtpPass also.

    Read the article

  • php-common causing conflict

    - by Cornwell
    I'm trying to install php-pdo but it always fails because of php-common bash-3.2# yum install php-pdo Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-epel.mirror.lstn.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-pdo.i386 0:5.1.6-40.el5_9 set to be updated --> Processing Dependency: php-common = 5.1.6-40.el5_9 for package: php-pdo --> Finished Dependency Resolution php-pdo-5.1.6-40.el5_9.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) Error: Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. Installing php-common I get: bash-3.2# yum install php-common Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-epel.mirror.lstn.net Setting up Install Process Package matching php-common-5.1.6-40.el5_9.i386 already installed. Checking for update. Nothing to do Searched here and google but couldn't find anything that worked EDIT: Added new repositories: bash-3.2# yum install php-common Loaded plugins: fastestmirror Repository base is listed more than once in the configuration Repository addons is listed more than once in the configuration Repository extras is listed more than once in the configuration Repository centosplus is listed more than once in the configuration Repository contrib is listed more than once in the configuration Loading mirror speeds from cached hostfile * addons: mirror.raystedman.net * base: mirror.5ninesolutions.com * centosplus: mirror.anl.gov * contrib: yum.singlehop.com * epel: fedora-epel.mirror.lstn.net * extras: centos.unmeteredvps.net * update: mirror.team-cymru.org addons | 1.9 kB 00:00 base | 1.1 kB 00:00 centosplus | 1.9 kB 00:00 centosplus/primary_db | 53 kB 00:01 contrib | 1.9 kB 00:00 contrib/primary_db | 1.1 kB 00:00 epel | 3.6 kB 00:00 extras | 2.1 kB 00:00 nginx | 2.5 kB 00:00 update | 1.9 kB 00:00 update/primary_db | 84 kB 00:04 updates | 1.9 kB 00:00 Setting up Install Process Package matching php-common-5.1.6-40.el5_9.i386 already installed. Checking for update. Nothing to do And then... bash-3.2# yum install php-pdo Loaded plugins: fastestmirror Repository base is listed more than once in the configuration Repository addons is listed more than once in the configuration Repository extras is listed more than once in the configuration Repository centosplus is listed more than once in the configuration Repository contrib is listed more than once in the configuration Loading mirror speeds from cached hostfile * addons: mirror.raystedman.net * base: centos.mirror.lstn.net * centosplus: mirror.anl.gov * contrib: yum.singlehop.com * epel: fedora-epel.mirror.lstn.net * extras: centos.unmeteredvps.net * update: mirrors.loosefoot.com Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-pdo.i386 0:5.1.6-40.el5_9 set to be updated --> Processing Dependency: php-common = 5.1.6-40.el5_9 for package: php-pdo --> Finished Dependency Resolution php-pdo-5.1.6-40.el5_9.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) Error: Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package.

    Read the article

  • Squid - Logging to MySQL without empty rows/skipped records?

    - by Lee Ward
    I'm trying to figure out how to make Squid proxy log to MySQL. I know ACL order is pretty important but I'm not sure if I understand exactly what ACLs are or do, it's difficult to explain, but hopefully you'll see where I'm going with this as you read! I have created the lines to make Squid interact with a helper in squid.conf as follows: external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log The external ACL helper (mysql_lg.php) is a PHP script and is as follows: error_reporting(0); if (! defined(STDIN)) { define("STDIN", fopen("php://stdin", "r")); } $res = mysql_connect('localhost', 'squid', 'testsquidpw'); $dbres = mysql_select_db('squid', $res); while (!feof(STDIN)) { $line = trim(fgets(STDIN)); $fields = explode(' ', $line); $user = rawurldecode($fields[0]); $cli_ip = rawurldecode($fields[1]); $protocol = rawurldecode($fields[2]); $uri = rawurldecode($fields[3]); $q = "INSERT INTO logs (id, user, cli_ip, protocol, url) VALUES ('', '".$user."', '".$cli_ip."', '".$protocol."', '".$uri."');"; mysql_query($q) or die (mysql_error()); if ($fault) { fwrite(STDOUT, "ERR\n"); }; fwrite(STDOUT, "OK\n"); } The configuration I have right now looks like this: ## Authentication Handler auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 30 auth_param negotiate program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-basic auth_param negotiate children 5 # Allow squid to update log external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log acl localnet src 172.16.45.0/24 acl AuthorizedUsers proxy_auth REQUIRED acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl CONNECT method CONNECT acl blockeddomain url_regex "/etc/squid3/bl.acl" http_access deny blockeddomain deny_info ERR_BAD_GENERAL blockeddomain # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # Allow the internal network access to this proxy http_access allow localnet # Allow authorized users access to this proxy http_access allow AuthorizedUsers # FINAL RULE - Deny all other access to this proxy http_access deny all From testing, the closer to the bottom I place the logging lines the less it logs. Oftentimes, it even places empty rows in to the MySQL table. The file-based logs in /var/log/squid3/access.log are correct but many of the rows in the access logs are missing from the MySQL logs. I can't help but think it's down to the order I'm putting lines in because I want to log everything to MySQL, unauthenticated requests, blocked requests, which category blocked a specific request. The reason I want this in MySQL is because I'm trying to have everything managed via a custom web-based frontend and want to avoid using any shell commands and access to system log files if I can help it. The end result is to make it as easy as possible to maintain without keeping staff waiting on the phone whilst I add a new rule and reload the server! Hopefully someone can help me out here because this is very much a learning experience for me and I'm pretty stumped. Many thanks in advance for any help!

    Read the article

  • Lockdown users on Windows Server 2012

    - by el.severo
    I set up a Active Directory on a server machine with Windows Server 2012 and I'd like to create some users with limitations like Windows Steady State does in Windows XP (locally). Seen already the Windows SteadyState Handbook (with Windows Server 2008), but I'd like to know if anyone has tried this before, the limitations are the following: 1. Prevent locked or roaming user profiles that cannot be found on the computer from logging on 2. Do not cache copies of locked or roaming user profiles for users who have previously logged on to this computer 3. Do not allow Windows to compute and store passwords using LAN Manager Hash values 4. Do not store usernames or passwords used to log on to the Windows Live ID or the domain 5. Prevent users from creating folders and files on drive C:\ 6. Lock profile to prevent the user from making permanent changes 7. Remove the Control Panel, Printer and Network Settings from the Classic Start menu 8. Remove the Favorites icon 9. Remove the My Network Places icon 10. Remove the Frequently Used Program list 11. Remove the Shared documents folder from My Computer 12. Remove control Panel icon 13. Remove the Set Program Access and Defaults icon 14. Remove the Network Connection(Connect To)icon 15. Remove the Printers and Faxes icon 16. Remove the Run icon 17. Prevent access to Windows Explorer features: Folder Options, Customize Toolbar, and the Notification Area 18. Prevent access to the taskbar 19. Prevent access to the command prompt 20. Prevent access to the registry editor 21. Prevent access to the Task Manager 22. Prevent access to Microsoft Management Console utilities 23. Prevent users from adding or removing printers 24. Prevent users from locking the computer 25. Prevent password changes (also requires the Control Panel icon to be removed) 26. Disable System Tools and other management programs 27. Prevent users from saving files to the desktop 28. Hide A Drive 29. Hide B Drive 30. Hide C Drive 31. Prevent changes to Internet Explorer registry settings 32. Empty the Temporary Internet Files folder when Internet Explorer is closed 33. Remove Internet Options 34. Remove General tab in Internet Options 35. Remove Security tab in Internet Options 36. Remove Privacy tab in Internet Options 37. Remove Content tab in Internet Options 38. Remove Connections tab in Internet Options 39. Remove Programs tab in Internet Options 40. Remove Advanced tab in Internet Options 41. Set a home page (Internet Explorer) 42. Restrict the possibility to change desktop image 43. Restrict the possibility to change wallpaper 44. Restrict usb flash drives Any suggestions for this? UPDATE: As @Dan suggested me I'd like to specify that would be applied to a educational scenario where students can login from a computer and want to add some restrictions to them.

    Read the article

  • Integrating JavaScript Unit Tests with Visual Studio

    - by Stephen Walther
    Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

    Read the article

  • Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

    - by Asian Angel
    This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

    Read the article

  • Week in Geek: LastPass Rescues Xmarks Edition

    - by Asian Angel
    This week we learned how to breathe new life into an aging Windows Mobile 6.x device, use filters in Photoshop, backup and move VirtualBox machines, use the BitDefender Rescue CD to clean an infected PC, and had fun setting up a pirates theme on our computers. Photo by _nash. Weekly Feature Do you love using the Faenza icon set on your Ubuntu system but feel that there are a few much needed icons missing (or you desire a different version of a particular icon)? Then you may want to take a look at the Faenza Variants icon pack. The icons are available in the following sizes: 16px, 22px, 32px, 48px and scalable sizes. Photo by Asian Angel. Faenza Variants Random Geek Links Another week with extra link goodness to help keep you on top of the news. Photo by Asian Angel. LastPass acquires Xmarks, premium service announced Xmarks announced that it has been acquired by LastPass, a cross-platform password management service. This also means that Xmarks is now in transition from a “free” to a “freemium” business model. WikiLeaks reappears on European Net domains WikiLeaks has re-emerged on a Swiss Internet domain followed by domains in Germany, Finland, and the Netherlands, sidestepping a move that had in effect taken the controversial site off the Internet. Iran: Yes, Stuxnet hurt our nuclear program The Stuxnet worm got some big play from Iranian President Mahmoud Ahmadinejad, who acknowledged that the malware dinged his nuclear program. More Windows Rogues than Just AV – Fake Defragmenter Check Disk Don’t think for a second that rogues are limited to scareware, because as so-called products such as “System Defragmenter”, “Scan Disk” “Check Disk” prove, they’re not. Internet Explorer’s Protected Mode can be bypassed Researchers from Verizon Business have now described a way of bypassing Protected Mode in IE 7 and 8 in order to gain access to user accounts. Can you really see who viewed your Facebook profile? Rogue application spreads virally Once again, a rogue application is spreading virally between Facebook users pretending to offer you a way of seeing who has viewed your profile. More holes in Palm’s WebOS Researchers Orlando Barrera and Daniel Herrera, who both work for security firm SecTheory, have discovered a gaping security hole in Palm’s WebOS smartphone operating system. Next-gen banking Trojans hit APAC With the proliferation of banking Trojans, Web and smartphone users of online banking services have to be on constant alert to avoid falling prey to fraud schemes, warned Etay Maor, project manager for RSA Fraud Action. AVG update cripples 64-bit computers A signature update automatically deployed by the AVG virus scanner Thursday has crippled numerous computers. Article includes link to forums to fix computers affected after a restart. Congress moves to outlaw ‘mystery charges’ for Web shoppers Legislation that makes it illegal for Web merchants and so-called post-transaction marketers to charge credit cards without the card owners’ say-so came closer to becoming law this week. Ballmer Set to “Look Into” Windows Home Server Drive Extender Fiasco Tuesday’s announcement from Microsoft regarding the removal of Drive Extender from Windows Home Server has sent shock waves across the web. Google tweaks search recipe to ding scam artists Google has changed its search algorithm to penalize sites deemed to provide an “extremely poor user experience” following a New York Times story on a merchant who justified abusive behavior towards customers as a search-engine optimization tactic. Geek Video of the Week Watch as our two friends debate back and forth about the early adoption of new technology through multiple time periods (Stone Age to the far future). Will our reluctant friend finally succumb to the temptation? Photo by CollegeHumor. Early Adopters Through History Random TinyHacker Links Fix Issues in Windows 7 Using Reliability Monitor Learn how to analyze Windows 7 errors and then fix them using the built-in reliability monitor. Learn About IE Tab Groups Tab groups is a useful feature in IE 8. Here’s a detailed guide to what it is all about. Google’s Book Helps You Learn About Browsers and Web A cool new online book by the Google Chrome team on browsers and the web. TrustPort Internet Security 2011 – Good Security from a Less Known Provider TrustPort is not exactly a well-known provider of security solutions. At least not in the consumer space. This review tests in detail their latest offering. How the World is Using Cell phones An infographic showing the shocking demographics of cell phone use. Super User Questions See the great answers to these questions from Super User. I am unable to access my C drive. It says it is unable to display current owner. List of Windows special directories/shortcuts like ‘%TEMP%’ Is using multiple passes for wiping a disk really necessary? How can I view two files side by side in Notepad++ Is there any tool that automatically puts screenshots to my Dropbox? How-To Geek Weekly Article Recap Look through our hottest articles from this past week at How-To Geek. How to Create a Software RAID Array in Windows 7 9 Alternatives for Windows Home Server’s Drive Extender Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder? Ask the Readers: How Much Do You Customize Your Operating System? How to Upload Really Large Files to SkyDrive, Dropbox, or Email One Year Ago on How-To Geek Enjoy reading through these awesome articles from one year ago. How To Upgrade from Vista to Windows 7 Home Premium Edition How To Fix No Aero Transparency in Windows 7 Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista Rename the Guest Account in Windows 7 for Enhanced Security Disable Error Reporting in XP, Vista, and Windows 7 The Geek Note That wraps things up here for this week. Regardless of the weather wherever you may be, we hope that you have an opportunity to get outside and have some fun! Remember to keep sending those great tips in to us at [email protected]. Photo by Tony the Misfit. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

    Read the article

  • How To Activate Your Free Office 2007 to 2010 Tech Guarantee Upgrade

    - by Matthew Guay
    Have you purchased Office 2007 since March 5th, 2010?  If so, here’s how you can activate and download your free upgrade to Office 2010! Microsoft Office 2010 has just been released, and today you can purchase upgrades from most retail stores or directly from Microsoft via download.  But if you’ve purchased a new copy of Office 2007 or a new computer that came with Office 2007 since March 5th, 2010, then you’re entitled to an absolutely free upgrade to Office 2010.  You’ll need enter information about your Office 2007 and then download the upgrade, so we’ll step you through the process. Getting Started First, if you’ve recently purchased Office 2007 but haven’t installed it, you’ll need to go ahead and install it before you can get your free Office 2010 upgrade.  Install it as normal.   Once Office 2007 is installed, run any of the Office programs.  You’ll be prompted to activate Office.  Make sure you’re connected to the internet, and then click Next to activate. Get your Free Upgrade to Office 2010 Now you’re ready to download your upgrade to Office 2010.  Head to the Office Tech Guarantee site (link below), and click Upgrade now. You’ll need to enter some information about your Office 2007.  Check that you purchased your copy of Office 2007 after March 5th, select your computer manufacturer, and check that you agree to the terms. Now you’re going to need the Product ID number from Office 2007.  To find this, open Word or any other Office 2007 application.  Click the Office Orb, and select Options on the bottom. Select the Resources button on the left, and then click About. Near the bottom of this dialog, you’ll see your Product ID.  This should be a number like: 12345-123-1234567-12345   Go back to the Office Tech Guarantee signup page in your browser, and enter this Product ID.  Select the language of your edition of Office 2007, enter the verification code, and then click Submit. It may take a few moments to validate your Product ID. When it is finished, you’ll be taken to an order page that shows the edition of Office 2010 you’re eligible to receive.  The upgrade download is free, but if you’d like to purchase a backup DVD of Office 2010, you can add it to your order for $13.99.  Otherwise, simply click Continue to accept. Do note that the edition of Office 2010 you receive may be different that the edition of Office 2007 you purchased, as the number of editions has been streamlined in the Office 2010 release.  Here’s a chart you can check to see what edition you’ll receive.  Note that you’ll still be allowed to install Office on the same number of computers; for example, Office 2007 Home and Student allows you to install it on up to 3 computers in the same house, and your Office 2010 upgrade will allow the same. Office 2007 Edition Office 2010 Upgrade You’ll Receive Office 2007 Home and Student Office Home and Student 2010 Office Basic 2007Office Standard 2007 Office Home and Business 2010 Office Small Business 2007Office Professional 2007Office Ultimate 2007 Office Professional 2010 Office Professional 2007 AcademicOffice Ultimate 2007 Academic Office Professional Academic 2010 Sign in with your Windows Live ID, or create a new one if you don’t already have one. Enter your name, select your country, and click Create My Account.  Note that Office will send Office 2010 tips to your email address; if you don’t wish to receive them, you can unsubscribe from the emails later.   Finally, you’re ready to download Office 2010!  Click the Download Now link to start downloading Office 2010.  Your Product Key will appear directly above the Download link, so you can copy it and then paste it in the installer when your download is finished.  You will additionally receive an email with the download links and product key, so if your download fails you can always restart it from that link. If your edition of Office 2007 included the Office Business Contact Manager, you will be able to download it from the second Download link.  And, of course, even if you didn’t order a backup DVD, you can always burn the installers to a DVD for a backup.   Install Office 2010 Once you’re finished downloading Office 2010, run the installer to get it installed on your computer.  Enter your Product Key from the Tech Guarantee website as above, and click Continue. Accept the license agreement, and then click Upgrade to upgrade to the latest version of Office.   The installer will remove all of your Office 2007 applications, and then install their 2010 counterparts.  If you wish to keep some of your Office 2007 applications instead, click Customize and then select to either keep all previous versions or simply keep specific applications. By default, Office 2010 will try to activate online automatically.  If it doesn’t activate during the install, you’ll need to activate it when you first run any of the Office 2010 apps.   Conclusion The Tech Guarantee makes it easy to get the latest version of Office if you recently purchased Office 2007.  The Tech Guarantee program is open through the end of September, so make sure to grab your upgrade during this time.  Actually, if you find a great deal on Office 2007 from a major retailer between now and then, you could also take advantage of this program to get Office 2010 cheaper. And if you need help getting started with Office 2010, check out our articles that can help you get situated in your new version of Office! Link Activate and Download Your free Office 2010 Tech Guarantee Upgrade Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideCenter Pictures and Other Objects in Office 2007 & 2010Change the Default Color Scheme in Office 2010Show Two Time Zones in Your Outlook 2007 Calendar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

    Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >