Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 48/82 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Why cant I get 3 monitors working with my ati 5770

  - by G-Dogg

  I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

  Read the article

• Adding Ubuntu installation to VIsta boot loader

  - by frapfap

  Hi, I had a Vista partition and created a partition and installed Ubuntu 9.10. During the Ubuntu installation I unchecked "Install Boot Loader" so it didn't install the GRUB bootloader. I wanted to keep Vistas boot loader so I could manage it within Vista as I know you can - Ive just forgot where in the Control Panel you do it! Anyway for some reason I incorrectly assumed that the Ubuntu entry would be added to the Vista boot loader. How do enable to choose which OS to use during booting up the computer as at the moment it just automatically loads Vista? Apologies if I'm technically incorrect - what I explained is what I thought was going on!! Thanks.

  Read the article

• Physically moving a hard drive from older iMac (c2d) to new iMac (i7) ?

  - by Inshim

  Instead of my usual habit of using superduper to mirror my drive to a new computer, I just physically moved the hard drive from an older iMac to a new one. But... it now doesn't boot, getting stuck at the apple logo screen. Since the hard drive that came with the new iMac works well, and my old drive works well when I return it to the older iMac, I conclude that there is some problem at the system/kernel level due to the different hardware. In the past I did similar things (e.g. starting a C2D machine from a Core Duo in target disk mode), so perhaps the change in architecture to the i5/i7 is too problematic? The main point: do you know of any way to get the system to rebuild for itself the proper versions of the system components when booting? Are there certain directories that I can safely delete to make that happen? Thanks

  Read the article

• How do I recover from a grub renaming issue?

  - by Justin Ardini

  I am currently dual-booting Ubuntu 10.04 and Windows 7 with grub 1.98 as the bootloader. I recently decided to edit the grub menu to remove the old Ubuntu kernels, so I followed the instructions of this guide and added the line list='version_find_latest $list' to the 10_linux file, then ran sudo update-grub. Apparently I made a mistake, because upon restart I had these bootloader entries: Ubuntu, with Linux $list Ubuntu, with Linux $list (recovery mode) Ubuntu, with Linux version_find_latest Ubuntu, with Linux version_find_latest (recovery mode) When I try to load any of these, I get a grub error along the lines of, Error: not a normal file Now I can't start any version of Ubuntu to remove the line I added. What's the best course of action to be able to use Ubuntu again? Thanks.

  Read the article

• Restore complete PC from another computer

  - by Mirage

  I have a few friends which keep on coming to me every month to format their laptops and then reinstall Windows. This is time consuming. Is there any way that I can make an image of their full system on my Harddrive and then restore to their Laptop from my computer? Edit: What I want is I have the image of the whole laptop on my desktop. The laptop is formatted with no OS. I have no CD/DVD to put in laptop (as the image is 15GB). How will I trasfer the image from my desktop to the laptop without using CD/DVD? Any option for booting via network, etc?

  Read the article

• SCO UNIX problem: "Cannot create /var/adm/utmp or /var/adm/utmpx"

  - by Maktouch

  Hey everyone, I have an old server that doesn't boot. I don't know the version of unix installed, but I see SCO UNIX. It stops with that error: UX:init: ERROR: Cannot create /var/adm/utmp or /var/adm/utmpx UX:init: ERROR: failed write of utmpx entry: " " UX:init: ERROR: failed write of utmpx entry: " " UX:init: INFO: SINGLE USER MODE After that message, it just stops. I cannot write or press anything. Even CTRL + ALT + DEL does not work. I cannot get into the system. I have tried booting with a DamnSmallLinux LiveCD but it does not recognize the file system on HDA. Is there a way to either log in as root or bypass this error? Thanks.

  Read the article

• What's the best solution for file sharing in my case? DAS or NAS?

  - by jakub

  I want to have in my network small, cheap and energy efficient server with will be fully customizable (Gnu/Linux, OpenBSD). What is more I want to have big, redundant storage in my network and access to it via server. I have already small terminal without hard drive (no SATA/PATA, one drive on USB) which works fine. I don't want to buy big server, or to use regular computer for that. It's not cheap. I thought about a small case (ITX?), and cheap computer in this with SATA ports, but I cannot find anything interesting :( I thought about NAS in network and server independently and booting server from NAS, I'm not sure which technologies will be good for that, and I don't know what with performance. Direct connection to NAS through network from workstation is next pro for that. What do you think about DAS? It will be good for that?

  Read the article

• PS/2 and USB Keyboard is not working !!

  - by Mr-Right

  hello, let me make is clear that it is a different question from other related questions already posted here. Here is the scenario,No OS is installed in Computer. I am trying to install windows xp professional but due to keyboard failure I can't make it. PS/2 keyboard is not working at all. USB keyboard is working only before POST,I can work in BIOS. As soon as it starts booting from CD disc,keyboard fails to respond. And I can't go ahead from this message Press any key to boot from CD......

  Read the article

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• How to locate chrome bookmarks in linux

  - by xenon

  I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Couldn't dual boot Vista and Centos 5.4

  - by jack sparrow

  Hi all, Today I have installed Centos 5.4 with dual boot with Vista. Everything was fine, but after testing Centos 5.4, when I tried to load Vista, it did not load. After selecting vista from grub menu, it shows the following message: rootnoverify (hd0, 1) chainloader +1 No bootmgr found I googled and try to fix the boot but failed, Then I restart my machine, boot with vista cd and in rescue option, restore my bootmgr by typing bootrec /fixmbr What happened after that, I can load at vista now, but no grub menu shows :P It seems the Centos went totally invisible. I am using dual booting Ubuntu 9.10 and vista in my laptop and its working fine and with no error from the beginning. But installed Centos for one of my project needs and I need it running asap. So I am feeling very helpless. Please help me anyone out there. I know there are many people knows how to fix it. Please help me.. Thanks in advance.

  Read the article

• Grub loading. The symbol ' ' not found. Aborted. Press any key...

  - by John

  Hi there, I have a dual boot system on dell xps 9000 with windows 7 and ubuntu. But after I performed system backup on it as requested by windows 7 I am no longer able to boot into the computer, instead at the beginning after bios I get the following message: Grub loading. The symbol ' ' not found. Aborted. Press any key... I tried to change bios booting config to starting with harddrive and it still returned the same message. Using windows boot disk only asks me to do another system backup or threatens to delete my harddrive completely. The only solution I have so far is to reinstall ubuntu, but that leaves 2 additional copies of ubuntu on my computer. Is there a simpler way to fix the situation so I can actually boot into windows? Thanks so much.

  Read the article

• Wrong Sound Blaster's PCI ID within Windows

  - by pavian

  I own Sound Blaster X-Fi Titanium, it was working with no problems under Linux or Windows 7. It's original PCI ID is 1102:000b but now I see different within MS Windows. BIOS setup: 1102:000b GNU/Linux: 1102:000b Windows 7: 1102:000d Windows 8: 1102:000d In last days I'm experimenting with IOMMU PCI passthrough in Xen and I tried to pass this device to virtual Windows 7 and 8. Here I found this problem. I don't know if this is just coincidence or reason of my problem but it's wrong even in physical system. Windows detects 1102:000d as a High Definition Audio sound device (I guess this name, I have localized Windows, but this is general name, the same was with Realtek HDA before drivers), it's playing but it's unstable (Windows speaker testing can crash that application) and I can't install Creative software. Used driver is hdaudio.sys. Booting in BIOS or UEFI mode doesn't change anything. Nor CMOS clean. Someone met the same problem.

  Read the article

• Ubuntu 9.1 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB.

  Read the article

• Is it possible to install Windows Server 2012 on a Dell PowerEdge with PERC S100 card?

  - by Warren P

  According to Dell's own website, the Windows Server 2012 media driver "inbox" does not contain drivers for the Perc S100 controller that is in a Dell PowerEdge T110 II server we'd like to evaluate with Server 2012. I have found drivers only for Server 2008 R2, which is what the server is currently running. Is it possible to upgrade this server? (Booting up the Server 2012 DVD image leads to the expected result that it can not locate the system's hard drives or its hard drive controller card, as the drivers for the PERC S100 are not on the installation DVD image.)

  Read the article

• Netgear router-speed problem after XBox use

  - by John Dudley

  When my son is at my place at the weekend, he plays XBox Live over the internet, using my wireless network (Netgear 'g' type router). This usually thrashes & crashes the router to the extent I have to hard-boot it to get it working again. However, after this weekend, on my two laptops, I'm left with the problem that the router is working, but I'm only getting 0.38Mbps out of it, at all times of the day. I've tried hard-booting the router, but no difference. Could this be a knock-on effect of the Xbox use? I can't believe the router could be damaged, but working slower? Is that possible? Tiscali haven't come back to me yet on any 'network' issues. Thanks in advance

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• How to report a bug against Ubuntu's upgrade process?

  - by Kim

  I just upgraded to lucid and discovered a nasty bug. It prevents the system from booting and took me hours to resolve. Now I'd like to report it along with the workaround I found. The only problem is: Where? Other such bugs have been filed against "update-manager", but that's just the GUI calling some scripts which do the real work. so what do I do? What should I substitute for XYZ in ubuntu-bug XYZ ?

  Read the article

• Starting Redmine at boot using upstart on Ubuntu

  - by joekr

  So after installing redmine from the repositories on Ubuntu 12.04, i've tried to create an upstart script (see below) so it would start up at boot time. While service redmine start does start redmine, it does not start automatically when booting. Also when i run service redmine stop it does stop redmine but simply hangs until i press ctrl+c Also, after stopping starting it again does not work (Also just hangs). From all the upstart examples and tutorials i have seen this should work, so i guess i'm overlooking something. Any hints ? #Redmine description "Redmine" start on started networking stop on stopping networking stop on starting shutdown console output expect daemon exec ruby /usr/share/redmine/script/server webrick -e production -b 188.40.184.155 -p 3000 -d respawn EDIT: Fixed "typo"

  Read the article

• ESXi boot time with 9 iSCSI targets

  - by Myles Gray

  Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

  Read the article

• Ubuntu 9.10 x64 has no sound, while Ubuntu 9.04 32 bit does.

  - by Macha

  I installed Ubuntu 9.10 x64 recently. Up until now I've been on 32 bit Ubuntu. For the first time since installing it, I went and tried to play a Youtube video. There was no sound. So a quick test to the system reveals that nothing will play sound (And I've tried turning the volume too full, as some have said output is quite quiet, but there is no sound at all). Further research shows that in sound preferences, the only output device listed was Dummy Output. Why would it work in 9.04 x86 and not 9.10 x64? While booting up, and occasionally with the sound preferences dialog open, I get a loud click (even though it isn't recognising my sound card). It's a Dell Studio 17 laptop. I'm not sure what the exact model of sound card is.

  Read the article

• Which software raid modes does each version of Windows 7 support?

  - by Goyuix

  Being familiar with the software raid modes and dynamic disks from the server versions, I was wondering if there is a document or even just common crowd knowledge that indicated what software raid support was available for each version of Windows 7. Also - all the various raid levels supported for booting or just a data recovery mechanism (e.g. you can connect three RAID-5 dynamic disks to an already booted system). I would prefer to stay away from modified/copied DLL's from the server variants, as well - please note - this is Windows software RAID - not fake-raid from your BIOS or an add-on card.

  Read the article

• How can I disable Ctrl+Shift+Arrow from causing my screen to flip?

  - by nizzle

  Windows 7 Home Premium, Catalyst Control Center. Without any apparent reason, after booting my PC, I got this little balloon "HD 4600 Drivers updated". I did not install any new cards or drivers or anything. But now, when I try to select an entire word by pressing Ctrl + Shift + ? / ? my screen flips left to right and upside down. Where can I disable this annoying shortcut? OR Any other way of selecting the entire word? There is no option for this in Catalyst Control Center.

  Read the article

• PC doesn't boot PC-BSD from USB

  - by turlando

  I've got a problem with a friend's PC: I'm installing a FreeBSD server and to make easier the installation for my friend I'm using the PC-BSD DVD. Surprise! The CD reader doesn't read DVDs, so I'm using a USB stick to perform the install. The PC seems supporting USB boot because I can choose it in the boot sequence, but the PC-BSD installation doesn't start, booting the OS installed in the primary HD. I have not physic access to the PC and I can't have at the moment more informations. What do you think about? Thanks and sorry for my terrible English. Tancredi Orlando.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >