Search Results

Search found 1696 results on 68 pages for 'bullitt five'.

Page 48/68 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Thecus N5200, disk has dropped out of RAID5

  - by Anders Ekdahl

  We have a Thecus 5200 NAS here at work with five WD Caviar Black 2TB disks in a RADI5 array. Yesterday, disk 4 dropped out of the array, and in the NAS web interface there's a warning about the RAID array being "degraded". When I go into Storage - Disks, disk 1 and 4 has a warning next to them. When I click on the warnings, this information about the disks are displayed: Tray Number 4 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 34 Reallocated Sector Count 66 Current Pending Sector 1447 Raw Read Error Rate 61 Seek Error Rate 0 Hardware ECC Recovered N/A Tray Number 1 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 32 Reallocated Sector Count 0 Current Pending Sector 1465 Raw Read Error Rate 0 Seek Error Rate 0 Hardware ECC Recovered N/A I'm not really an expert on either disks or RAID arrays. Does this indicate that the fourth disk is damaged, and needs to be replaced? And what about disk number one? It has a warning, but it's still in the array. Is it safe to add the fourth disk back into the array as a spare? I can't find any way to add it back as a it were before.

  Read the article

• Apache going straight to 100% mem usage on localhost

  - by Dennis Pedrie

  Hi, I'm running XAMPP on a OS X testing server... I'm the only person sending requests to the server. I've never messed with Apache config before, so I'm kinda without a paddle here. When I start Apache, I get ~10 httpd processes started, and 95% idle CPU. When I request a WordPress page, the CPU usage goes to 50%, and the page loads in about five seconds. It seems like once the page has finished loading, the CPU usage jumps to 100%, almost all of that httpd. A ton of processes get started, and they don't go away, and their CPU usage stays the same. I've changed the MaxRequestPerChild setting and so forth, but nothing seems to solve the problem. Even now, having not send any requests for about 15 minutes, the CPU usage is at 100%. Here's the applicable settings: Timeout 10 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 0 MaxSpareServers 2 MaxClients 20 MaxRequestsPerChild 50 </IfModule> I had always thought that once the request was made, Apache killed the process. Is there anything I can do to bring down the CPU usage, or is this just something I'll have to deal with? Thanks for helping out an Apache idiot.

  Read the article

• Google bots are severely affecting site performance

  - by Lynn

  I have an aggregate site on a linux server that pulls in feeds from a universe of about 2,000 blogs. It's in Wordpress 3.4.2 and I have a cron job that is staggered to run five times an hour on another server to pull in the stories and then publish them to the front page of this site. This is so I didn't put too much pressure all on one server. However, the Google bots, which visit a few times every hour bring the server to its knees in the morning and evenings when there is an increase in traffic on the site. The bots have something like 30,000 links to follow at this point. How do I throttle the bots to simply grab the new stories off the front page and stop there? EDIT- Details of my server configuration: The way we have this set up is the server that handles all the publishing is an unmanaged instance via AWS. It mounts the NFS server and connects to the RDS to update content, etc. You get to this publishing instance via a plugin that detects the wp-admin link and then redirects you into there. The front end app server also mounts the NFS and requests data from the RDS. It is the only one that has the WP Super Cache on it.... The OS is Ubuntu on the App server and the NFS runs CentOs. The front end is Nginx and the publishing server is Apache.

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• Windows 7 starts getting sluggish over a few days

  - by munrobasher

  Myself and the other developer are running Windows 7 Enterprise 64 bit with 8GB RAM on different Gigabyte motherboards with Quad core Intel CPUs. Most of the time, it runs like a dream. We use VMware workstation a lot (hence the 8GB) and that works well. Except... now and then, after the PCs have been on for a few days, the whole system starts getting really sluggish doing certain tasks. The other's developer's system is far worse than mine with it taking up to a minute to launch IE. Today, mine has gone sluggish but nowhere near as bad. For example, normally when I click on a new tab in IE, it's instant. Today, there's an obvious delay. Right-clicking in this window to trigger iSpell is normally instant, right now it takes about five seconds. I've got resource monitor open on my second monitor and when I did that right-click, there was no obvious peak in CPU, disk or memory. A reboot does fix it so it does sound like a resource issue but haven't a clue what might be to blame. The two computers have similarities (same spec) but also differences (like motherboard, RAM & CPU models). So I guess the question is, any pointers on diagnosing why a PC is sluggish? What could cause such a right-click slow down in IE for example? It sounds like such a simple operation. NOTE: whilst typing this message alone, it was fine performance wise. I can click around the page no problem but right-click still is noticeable slow. Will reboot over lunch... Cheers, Rob.

  Read the article

• Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

  - by Josh Stodola

  So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

  Read the article

• Windows Server 2008 - RAID 5 Fails on Reboot

  - by Adam

  Hey, I've got an install of Windows Server 2008 Enterprise. It's running software RAID-5 with five disks. The disks were originally formatted under Windows Server 2003, but came up fine once I installed Windows Server 2008. The issue I'm having is that every time I reboot the server, the RAID comes up with a "Failed Redundancy" - the data stays available. I have 4 disks on a PCI SATA controller, and one of the disks connected to the motherboard's on-board SATA ports. (The other on-board port has the system disk connected.) I was having Disk #4 fail consistently, so I tried swapping the cables on the controller end. I swapped the on-board RAID disk with one on the PCI controller. Same issue now, expect with disk #1. Once the system's up, I can reactivate the RAID, it will resync for a while, then go to "Healthy", and will stay that way for an indefinite amount of time - until I reboot. As soon as I reboot, the disk drops again. I've ruled out disk + cable with the recabling. I don't believe it would be the controller as it seems to work fine most of the time - only failing on reboot, and the other port on the same controller connects the system disk - which is clearly working. I did look in the event log, but didn't see anything particularly relevant (although I didn't know what I was looking for - just looked for anything with a "Warning" or "Error" symbol that looked disk-related :)). I'm not particularly familiar with RAID on Windows, does anyone have any idea why this might be doing this? Any idea how to fix it? Any suggestions appreciated! -- Adam

  Read the article

• What is the proper way of debugging a slow Windows installation?

  - by Niklas

  You know the drill - you've been asked to check why you cousin's computer is running slow. I was there yesterday. Being a Mac user since 2007 I haven't really dug deep in Windows internals in the past five years. Googling for answers reveals many, many different answers: broken registry, spyware, antivirus program, fragmented disk, turning of visual effects etc. In this particular case I was asked to look at a two year old HP laptop with Vista. Windows was running incredibly slow and even opening up a new explorer window took almost a minute. I ended up doing everything of the above: running cc cleaner, defragmenting the disk, turning off visual effects, turning off norton and a bunch of other things people believe have an impact on Windows performance. Now I'd like to understand this in depth. Is there a proper, "scientific" if you so will, way of debugging and understanding where the problem with a slow running Windows installation lies? (In my particular case this concerned Windows Vista but let's try to create general guide for XP and Windows 7 too). To me, it seems wrong to just run a bunch of different tools without understanding the underlying cause of the error.

  Read the article

• Windows VPN always disconnects after < 3 minutes, only from my network

  - by hemp

  First, this problem has existed for almost two years. Until serverfault was born, I pretty much gave up on solving it - but now, hope is reborn! I've set up a Windows 2003 server as a domain controller and VPN server at a remote office. I am able to connect to and work over the VPN from every windows client I've tried, including XP, Vista, and Windows 7 without issue, from at least five different networks (corporate and home, domain and non.) It works fine from all of them. However, whenever I connect from clients on my home network, the connection drops (silently) after 3 minutes or less. After a short while, it will eventually tell me the connection has dropped and attempt to redial/reconnect (if I've configured the client that way.) If I reconnect, the connection will re-establish and appear to work correctly, but again will silently drop, this time after a seemingly shorter time period. These are not intermittent drops. It happens every single time, in exactly the same way. The only variable is how long the connection survives. It doesn't matter what type of traffic I send. I can sit idle, send continuous pings, RDP, transfer files, all of that at once - it makes no difference. The result is always the same. Connected for a few minutes, then silent death. Since I doubt anyone has experienced this exact situation, what steps can I take to troubleshoot my evanescing VPN?

  Read the article

• Need Help Scoping a Server to use for study (MCITP Ent Admin + SharePoint 2010)

  - by AVFamily76

  i need to study for mcitp, but i also need to study for sharepoint 2010 i have a poweredge 1850 with two single-core CPUs + two 73G drives - it kills me on electricity, so don't want to use it, and it won't do VT, but it could be one of three boxes for a lab that's cheap, but will cost a lot on electricity i was thinking . . . OPTION #1 Opteron 4170 HE (50 watt chip), 6-core, only two-bills ($200), but the board's are $250, so that's an $800 box, then get another box to dual-boot Win7/Hyper-V on the cheap...? OPTION #2 Used Quad - but how many VM's that are really banging away could it run at same time? (Server 2008r2, SQL 2008r2, Search Server) OPTION #3 Study from books and just get one box that can run two VM's at same time, even if slowly. the last time i had and used a home lab was five years ago when i had a DC, SQL, Exchange and business app box, that's where i got my server skills was just banging on it for four years, but didn't read any books, so now i have to get certified and know the material, and just am not sure how much attention i should pay to the box i use versus the studying time and reading. sorry it's a subjective question, and am obviously open to all sorts of abuse here, but hope you can tell me also how many VM's i can run at the same time given what they'll be doing (SQL and SharePoint FAST search server are resource hungry) thanks!

  Read the article

• How to remove Media Center from Windows 8

  - by Arabella

  I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

  Read the article

• How to autorun wpa_supplicant on Debian startup

  - by The Electric Muffin

  I'd like to run wpa_supplicant -D wext -i wlan0 -c /etc/wpa_supplicant.conf on Debian startup (runlevels 2-5). I found some vague instructions from a related question that said to put a script in /etc/init.d/ and then symlink to it from the apropriate /etc/rcRUNLEVEL.d/ directories. However, I noticed that there are already some files named "wpasupplicant" that probably run at startup: /etc/network/if-down.d/wpasupplicant /etc/network/if-post-down.d/wpasupplicant /etc/network/if-pre-up.d/wpasupplicant /etc/network/if-up.d/wpasupplicant They all are symlinks to the same script, /etc/wpa_supplicant/ifupdown.sh. It has a comment at the beginning saying it "[...] allows ifup(8), and ifdown(8) to manage wpa_supplicant(8) and wpa_cli(8) processes running in daemon mode." However, the closest it gets to calling wpa_supplicant itself is (in functions.sh): WPA_SUP_BIN="/sbin/wpa_supplicant" [snip] start-stop-daemon --start --oknodo $DAEMON_VERBOSITY \ --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \ -- $WPA_SUP_OPTIONS $WPA_SUP_CONF [snip] start-stop-daemon --stop --oknodo $DAEMON_VERBOSITY \ --exec $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE Does that mean it's safe to make an init.d script for wpa_supplicant, and if so what would it look like? General info: Debian Squeeze (5.0) official wpasupplicant package (v0.6.10-2.1) The full contents of my system's functions.sh and ifupdown.sh are here (dependent, of course, on my system's uptime—it's a five-year-old laptop that greatly enjoys overheating): functions.sh ifupdown.sh

  Read the article

• Google Chrome no longer treats " Web Apps" specially

  - by Adrian Petrescu

  I'm running Google Chrome (Dev Channel), with the --enable-apps flag, in both OSX and Ubuntu. I have four or five WebApps installed, and they appear in the "New Tab" page just fine. The problem is that, before, when the feature first became available in the Dev Channel, the actual tabs hosting the webapps received special treatment; they would have 3D Dock-like look, and (more importantly) the tab bar would be hidden while using that tab. Sometime in the last few weeks, however, it seems that the special treatment just disappeared with one of the daily updates. The webapps still show up in the New Tab page, they still work in the sense that they capture all URLs going to that webapp, and they use the right icons; but they've basically become indistinguishable from just a regularly pinned tab. The two special features mentioned above have disappeared, on both Ubuntu and OS X. My questions are simply: a) Does this happen to anyone else? When exactly did it begin? b) Why did Google regress the feature? c) Is there any flag I can enable to get it back?

  Read the article

• Linux file server for an inexperienced admin

  - by Pat

  A charity I volunteer for wants a file server for their mostly Windows machines (about five XP and 7 machines, with some Mac laptops every now and then). For the server, I have a PC with an Intel Core 2 Duo 3GHz proc, 4GB of DDR2 400MHz RAM, and a 500 GB HDD. (I should point out that they do not currently have any server - they are just using Windows to share a folder on one of the PCs.) What is a linux distro that is easy to configure for Windows file serving yet stable and secure enough to protect sensitive data without an expert sysadmin? I'm guessing that a Debian distro would probably fit the security bill, but I don't know of any tailored to novice sysadmins. Also, are there any killer apps for making this easy to administer and set up (as a Windows file server, in particular - this answer is a good example)? Would FreeNAS be sufficient? Once it's all set up, what are the minimum measures I need to take to keep the data secure? I found this somewhat helpful answer, but it's not specific to my question of just getting a secure file server up, running, and maintained.

  Read the article

• Chrome Lockups Windows 7 64-bit

  - by Mike Chess

  I'm running Google Chrome (6.0.427.0 dev) on Windows 7 Home Premium 64-bit (AMD Phenom 3.00 GHz, 8 GB RAM). The computer lockups hard after running Chrome for about five minutes. The lockup happens whether Chrome is actually being used to browse web sites or it is just idling. No programs can be started or interacted with when this happens. The computer must be power-cycled to recover. The lockup happens regardless of which web sites are being browsed. The system event logs do not show any events around the time when the lockup transpired. All other applications run just fine on this system. In fact, Chrome ran without issue for several months on this system (the system was brand new 03-2010). I also run the same version of Chrome on other computers (Windows XP SP3) without issue. I've come to really like Chrome and use it as my default browser whenever possible. What could be causing Chrome to cause the system to lockup as it does? Does Chrome have any logs that aren't part of the Windows event log? Does Chrome have a debug command line switch that might reveal more about what happens?

  Read the article

• In Windows 7, why won't my display stay off despite the power settings saying it should?

  - by Jer

  I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

  Read the article

• Message to distribution list with removed recipient bouncing back when sent from external mail server

  - by jshin47

  I removed a particular user from all distribution groups manually about five days ago. This user was a member of two particular groups that have other recipients. The OAB polling interval is 30 minutes, not that it really matters here. The situation is that I have an SMTP server that is not part of my Exchange organization that sends out automated email reports to these distribution groups. It sends them using a from: address that is a member of our Exchange organization. That member receives a bounce-back email indicating the member that should have been removed from the group does not exist. I have also verified that this is the same behavior when sending an email from a webmail service like GMail or Hotmail (outside of our Exchange organization of course) to either of those distribution group addresses. However when I send an email internally to one of those distribution group addresses everything works as expected (no bounce messages.) Not sure why this would be happening, but also not sure how to go about diagnosing the issue. I've looked at the SMTP headers and there are no relevant clues there as far as I can tell. I think it's an Exchange issue.

  Read the article

• Playback random section from multiple videos changing every 5 minutes

  - by brian

  I'm setting up the A/V for a holiday party this weekend and have an idea that I'm not sure how to implement. I have a bunch of Christmas movies (Christmas Vacation, A Christmas Story, It's a Wonderful Life, etc.) that I'd like to have running continuously at the party. The setup is a MacBook connected to a projector. I want this to be a background ambiance thing so it's going to be running silently. Since all of the movies are in the +1 hour range, instead of just playing them all through from beginning to end, I'd like to show small samples randomly and continuously. Ideally the way it would work is that every five minutes it would choose a random 5-minute sample from a random movie in the playlist/directory and display it. Once that clip is over, it should choose another clip and do some sort of fade/wipe to the chosen clip. I'm not sure where to start on this, beginning with what player I should use. Can VLC do something like this? MPlayer? If there's a player with an extensive scripting language (support for rand(), video length discovery, random video access). If so, I will probably be able to RTFM and get it working; it's just that I don't have time to backtrack from dead-ends so I'd like to start off on the right track. Any suggestions?

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• (Some) security perms in WinXP corrupted (shows GUID instead of username)

  - by Andy

  I've been using my Win XP machine (part of a domain) over the holiday period, so until yesterday it hadn't rebooted for about five days. I used it yesterday perfectly fine and shut it down. When I switched it on this morning the majority (but not all) of my shortcut links in the Quick Launch toolbar showed as generic file icons. If you open the folder and get properties on one of the failing shortcuts it says ''Target type: This is not a valid shortcut''. Then in Outlook I noticed my signature wasn't showing (I checked my sent folder and the sig was ok yesterday). Checking the signature folder, I can't see the security tab on any of the sig files, and I have an access denied message on trying to open them. I can see the security tab on the signature folder itself, just none of the contents. If I try and use the parent folder's security tab and ''Replace permission entries on all child objects with entries shown here that apply to child objects'' it appears to work fine, but makes no actual difference. I logged in as administrator and saw that the owner of the files showed up as a GUID (clearly should've been my account in its place). Any ideas what might have made that happen? So far I haven't heard any similar complaints from anyone else at the office...

  Read the article

• Where can someone store >100GB of pictures online? [closed]

  - by sbi

  A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

  Read the article

• PHP 5.3.5 Windows installer missing php_ldap.dll

  - by nmjk

  I'm working with Windows Server 2008, Apache 2.2. I'm using php-5.3.5-Win32-VC6-x86.msi as the installer, using the threadsafe version. I've gone through the install process four or five times just to make sure that I'm not missing anything ridiculous, but I don't think I am. The problem is that the php_ldap.dll extension simply doesn't seem to exist. It's not present in the installer interface (where the user is asked to choose which extensions to install), and it definitely doesn't appear in the ext/ directory after install. I found a lot of mentions of this issue for 5.3.3, including links to download the extension individually. Those links no longer exist, of course, and besides: they were for 5.3.3. I'd really rather use an extension that belongs with PHP 5.3.5. Anyone else encounter this problem? Any ideas as to what's going wrong? Anyone seen acknowledgement by the PHP folks that the file is indeed missing, and that it's an oversight? It's quite a frustration because the server I'm building has no purpose if I don't have PHP LDAP support. Cheers all, and thanks in advance for your assistance.

  Read the article

• Is it possible to ack nagios alerts from the terminal on a remote workstation?

  - by cat pants

  I have nagios alerts set up to come through jabber with an http link to ack. Is is possible there is a script I can run from a terminal on a remote workstation that takes the hostname as a parameter and acks the alert? ./ack hostname The benefit, while seemingly mundane, is threefold. First, take http load off nagios. Secondly, nagios http pages can take up to 10-20 seconds to load, so I want to save time there. Thirdly, avoiding slower use of mouse + web interface + firefox/other annoyingly slow browser. Ideally, I would like a script bound to a keyboard shortcut that simply acks the most recent alert. Finally, I want to take the inputs from a joystick, buttons and whatnot, and connect one to a big red button bound to the script so I can just ack the most recent nagios alert by hitting the button lol. (It would be rad too if the button had a screen on the enclosure that showed the text of the alert getting acked lol) Make fun of me all you want, but this is actually something that would be useful to me. If I can save five seconds per alert, and I get 200 alerts per day I need to ack, that's saving me 15 minutes a day. And isn't the whole point of the sysadmin to automate what can be automated? Thanks!

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >