Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 48/314 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• 2 HP Procurve 4000M switches and Comcast SMC Gateway

  - by Cole Tierney

  We've got 2 HP Procurve 4000M switches joined by a trunk. Switch 1 is connected to a Cisco 2600 router which is connected to a T1. Internet traffic for hosts on switch 2 must pass through the trunk to switch 1. We're now switching to Comcast who's given us 4 port SMC router. I would like to connect each switch to the comcast router to reduce traffic on the trunk, but I don't want to create a loop. The switches support spanning tree protocol, but I don't know how this would work with the comcast router. Would a triangle network like this work? Thanks for any tips.

  Read the article

• Samba networking with a domain-joined computer

  - by MCS

  I have two computers connected to the same linksys router - one running Ubuntu 8.04 and one running Windows 7. The Windows computer is part of a work domain (when connected via VPN). I'm trying to also create a home network so I can access the linux server from Windows. From what I understand, I have to first create a Windows workgroup and then configure Samba on linux to join the Windows network. So in Windows, I went to Control Panel - Network and Internet - HomeGroup and got the following message: There is currently no homegroup on your network. Because this computer also belongs to a domain, you can't create your own homegroup, but can join one created by someone on your network. Can I use Samba to create a homegroup? Is there any other way to create a Windows workgroup? Or am I barking up the wrong tree completely?

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by user28837

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  Read the article

• Huawei HG8245T Router - not connecting to another router

  - by BubbaK

  I just got a fiber optic connection installed at home and due to the build of the house, it's mostly cement/bricks, the wireless connection isn't received throughout the house. Previously, to combat this issue, I just ran a hardwire from the modem downstairs and upstairs and had it connected to a secondary (DLink) router. It did the job of getting me seamless wireless internet access everywhere. The issue is now with the new Huawei router, this setup isn't working. I have connected everything as previously, but it seems that the other (DLink) routers are not picking up the connection. I have tried everything and am totally lost as what to do to overcome this problem. Any help would be appreciated.

  Read the article

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• external SCSI tape drive DAT 72 problem Solaris 10

  - by Hassan

  Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran mt -f /dev/rmt/0 status it reveals the following output bash-3.00# mt -f /dev/rmt/0 status /dev/rmt/0: No such file or directory when i ran ls -l it reveals the following output ls -l /dev/rmt/0 lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0: it seems to me everything is okay SCSI cable is connected properly to Tape device and to server as well the tape has SCSI termination dongle as well and connected properly to Tape device as well any ideas would be a great assist Thanks in advance

  Read the article

• Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

  - by Marl

  The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

  Read the article

• Can I run a web site from my home network without jeapordizing other computers on my LAN?

  - by Alchemical

  I have a home LAN with 5 computers and a NAS, all connected to a Linksys router which is connected to my Cox cable modem. I'm interested in having one of my computers run an IIS-based web site and to have it be accessible to the internet with a static IP. However, I do not want o jeapordize the safety of the other computers on my home network! Is there anyway to do this safely, or as safe as possible? I may also like to run an FTP server from this computer. Finally, optionally I would like to allow remote access to this computer from the internet--but it seems to me that that may increase the security risk to the other computers substantially.

  Read the article

• NAS disk - problem with accessing SAMBA

  - by dominolog

  Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by pratikk

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• HTTP downloads stop after some time, resuming is not possible

  - by cdauth

  When I try to download a file via HTTP, the downloads sometimes stop after around 30 MB. The download rates goes down to 0 B/s and no data keeps coming. When I stop the download and resume again, the download still hangs. But when I redownload it from byte 0 again, everything works fine up to 30 MB when it stops again. Sometimes, after some hours, it just works again without problems. The position in the file when the download stops is variable, but most of the time it is around 30–35 MB. As a download manager I use wget. The same behaviour happens though using curl and other download managers. The error occurs independently of the server I download from. I have also observed this error on other Linux computers in my network. All computers on my network run Gentoo Linux on x86. All internet connections on my network go through a server on my network which runs a transparent Squid proxy on port 80. That server is connected to a router, which is a Speedport W 700V by Deutsche Telekom AG. That router is connected to the internet using ADSL, with 448 kbit/s down speed and 96 kbit/s up speed. I am almost sure that my transparent proxy is not the problem. I turned that off without resolving the issue. I also connected to the router directly via WLAN without resolving the issue. I also tried to download over another port via HTTP. Furthermore, I tried to download the file using IPv6 with a gateway6 tunnel from my computer, which resulted in exactly the same problem. Now the strange thing is that everything works fine using FTP and HTTPS (also with wget on the same computer). Even more strange: when I resume the download that hanged over HTTP using FTP or HTTPS, download a few bytes that way, stop wget and then resume again using HTTP, it loads data again! But after a few MB, it may stop again. Unfortunately, files downloaded that way are always broken (the MD5 sum is not correct), so at some point, there must have been bogus data. I tried searching for HTML error messages in the downloaded file, but grep -i html does not find anything. (I cannot think of a way to search for GZIP-compressed HTML error messages in the file, so I did not try that.) I tried using strace on wget when it failed to resume a download, you can find the entire output on pastebin. The important lines are repeated every second: clock_gettime(CLOCK_MONOTONIC, {326102, 62176435}) = 0 ) = 1 write(2, "78% [++++++++++++++++++++++++++++"..., 19578% [+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ] 110,683,685 --.-K/s ) = 195 select(4, [3], NULL, NULL, {0, 949999}) = 0 (Timeout) I have absolutely no idea what could be the reason of this problem. It seems like whatever causes the issue speaks HTTP. It seems to speak HTTP that intelligently that it even regognises it in an IPv6-over-IPv4 tunnel. But what could that be and why does it only happen sometimes? The other possibility would be that there is a problem on my computer that is the same on other Gentoo Linux computers as well. Has anyone ever had such a problem? What could be the reason and where do I have to continue investigating to find out more about the issue? Update: I have just run into the problem again and tried to resume the download over the router’s WLAN, and this time it worked. Maybe I did something wrong during my last tests with the WLAN. Now maybe my transparent proxy server is in fact the problem. It is a very basic Squid proxy server that does not cache anything. Maybe the fact is interesting that a second Squid proxy runs on the same computer on another port. Update: A download hung again and this time I turned off all firewall settings and stopped all proxy servers. I failed to resume the download from my network server, which is directly connected to the router. So my proxy server definitely is not the cause the problem. I will try to upgrade the firmware of my router now, although I do not have admin access to it. I will see what I can do.

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Other Ideas to troubleshoot Cisco IPSec VPN on OSX?

  - by Tawm

  We have one user running OSX Snow Leopard who is having issues staying connected to our VPN running off of an ASA5510. His connection can die even as he's actively pushing traffic across it or if he's been idle for a period of time. Other users on Snow Leopard, Lion, XP, Vista, 7 and various linux flavors are able to stay connected for 24hrs+ without issue We've deleted and remade the connection in System Preferences Networking, ran killall racoon (kills any lingering connections) Below are the logs from the user's system.log from a connect/disconnect cycle: Oct 10 21:22:25 username racoon[8192]: Connecting. Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Oct 10 21:22:25 username racoon[8192]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 XAUTH: success. (XAUTH Status is OK). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 Config: retransmited. (Mode-Config retransmit). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (MODE-Config). Oct 10 21:22:29 username configd[14]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.0.100), current interface setting (name: utun0, family: 1001, address: 10.215.8.53, subnet: 255.0.0.0, destination: 10.215.8.53). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username configd[14]: network configuration changed. Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:29 username racoon[8192]: Connected. Oct 10 21:22:29 username configd[14]: SCNCController: Connected. Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:47 username login[8200]: USER_PROCESS: 8200 ttys003 Oct 10 21:22:48 username GrowlHelperApp[160]: Periodic CFURLCache Insert stats (iters: 17240) - Tx time:0.001749, # of Inserts: 1, # of bytes written: 304, Did shrink: NO, Size of cache-file: 26624, Num of Failures: 0 Oct 10 21:25:24 username login[7367]: DEAD_PROCESS: 7367 ttys002 Oct 10 21:25:31 username login[7907]: DEAD_PROCESS: 7907 ttys001 Oct 10 21:27:32 username configd[14]: SCNCController: Disconnecting. (Connection was up for, 303 seconds). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Oct 10 21:27:32 username racoon[8192]: Disconnecting. (Connection was up for, 302.766105 seconds). Oct 10 21:27:32 username configd[14]: network configuration changed. Oct 10 21:27:34 username login[8200]: DEAD_PROCESS: 8200 ttys003

  Read the article

• Internet connection slower than network connection speed

  - by Mike Pateras

  I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

  Read the article

• Can Linux works as 802.1X authenticator in bridge mode ?

  - by Kartoch

  I want to create a lab for my students with netkit (a network emulator based on 802.1X) to study 802.1X. I can create the authentication server (FreeRadius) and configure the client with XSupplicant connected by a switch (a Linux in bridge mode). I'm looking to a way to configure the switch as Authenticator, i.e.: when the client is connected, the switch only forwards EAP packets to the authentication server. then the switch lets the user access to the local network when the authentication server authorizes the client. At the present time there is a lot of documentation to do this with a wireless point but no one for a switch. Does anyone have an idea or know the good software for it ?

  Read the article

• Android tethering question

  - by Solignis

  Hi there, I have a Motorola Droid 1 with Android 2.2 on it. I found something odd that I don't understand why it works. If I plug my phone into my home computer which is Windows 7 and I turn on the tethering ability, I am met with a Verizon captive portal and it tells me I need to pay for a tethering plan (which I don't have). Now the weird thing, if I plug the same phone into my Ubuntu 10.10 laptop and enable tethering it works and can get on the internet with no captive portal showing up. The only thing I could notice that was different about the connections was Windows connected to the phone with an NDIS driver and Linux connected to the phone with what I think is a raw device mapping. Would that have anything to do with it?

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• Set Display Refresh Rate in OSX w/o External Utilities

  - by codedonut

  I have an iMac and an LG Flatron connected as a secondary monitor. The recommended resolution for the flatron is 1680x1050 @ 65.290 Hz (horiz), 59.954 Hz (vert). For some reason, OSX is choosing a slightly different set of scan rates and this is currently my best guess of why the monitor goes into power saving mode when connected to the iMac (but works fine on a PC). Now, I resolved this by installing switchResX and fudging the scan rates according to the specs in the manual. But how does one change these rates w/o 3rd party tools? Which config files need editing? Thanks

  Read the article

• WCF Communication Problem

  - by vincpa

  Two separate servers, one is an IIS7 web application trying to connect to a WCF service on the other server. The initial connect always fails, sometimes the second, after that, everything works normal. What could be the cause of this problem? The exception that gets thrown is EndpointNotFoundException Could not connect to net.tcp://192.168.0.83/MgrService/Manager.svc. The connection attempt lasted for a time span of 00:00:21.0289348. TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.0.83:808.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >