Search Results

Search found 3211 results on 129 pages for 'david butler'.

Page 48/129 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• having 2 ip's on a debian 7 box

  - by David

  I just installed Debian Wheezy on my homeserver. I want to assign 2 ip's to it on the same network interface, 1 static ip (eth0) and 1 dynamic ip (eth0:1). I know it doesn't make much sense but I need it to test something. I edited my /etc/network/interfaces to be like this: auto lo eth0 eth0:1 iface lo inet loopback iface eth0 inet static address 192.168.178.240 network 192.168.178.0 netmask 255.255.255.0 broadcast 192.168.178.255 gateway 192.168.178.1 iface eth0:1 inet dhcp when I bring up eth0:1 (ifup eth0:1) I get the following error (eth0 works fine) Bind socket to interface: No such device Failed to bring up eth0:1. is it even possible to have a dynamic and static ip on the same network adapter?

  Read the article

• What constitutes valid justification for more IP addresses?

  - by David

  I host a small website with a well known VPS service. They provided me with one IPv4 address upon registering and said additional addresses would require justification. I requested one additional IPv4 address so as to have one for a production environment and one for a testing/QA environment. They said this was unnecessary as I could just use alternative TCP ports for the test environment. I can live with using a non-standard port for non-production hosting, but it got me thinking, what would be valid justification? (I asked them and they didn't want to answer). Is there an industry standard for what counts as "valid" justification for additional IPv4 addresses?

  Read the article

• Ubuntu Linux: Process swap memory and memory usage

  - by David Halter

  My Ubuntu eats more memory than the task manager is showing: sudo ps -e --format rss | awk 'BEGIN{c=0} {c+=$1} END{print c/1024}' 1043.84 free -m total used free shared buffers cached Mem: 3860 1878 1982 0 20 679 -/+ buffers/cache: 1178 2681 Swap: 2729 1035 1693 That's strange. Can someone explain this difference? But what is more important: I'd like to know how much memory a process is really using. I don't want to know the virtual memory size, but rather the resident memory plus swap of a process. I have also tried to output the format param "sz" of 'ps', but the sum of this is to high (5450 MB) (param 'size' gives 8323.45 MB). Are there any other options? I really want to use this, to determine which programs/processes are eating to much memory (and swap), to kill them, because hibernate might not be working if the swap partition is to little.

  Read the article

• Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

  - by David Pearce

  I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

  Read the article

• Create room mailbox in Exchange 2007 - cannot view calendar

  - by David Neale

  I'm an application developer and I'm trying to play around with Exchange in order to integrate a room booking system with it. I've created a room mailbox and have set it so that it auto-accepts appointment requests. When creating an appointment as a standard user I can add the room as a resource and its availability will display. However, I can add it as a shared calendar to Outlook 2003 (Unable to display the folder. The Calendar folder could not be found) nor can I return the calendar folder using Exchange Web Services (again, could not find the folder). I've also created an appointment via Exchange Web Services with a room as a resource. The resource was successfully booked (as confirmed when opening it as the room's delegate) but it does not appear on the meeting as viewed by any of the attendees. Is there anything further I need to do in order to share this calendar? How do most organisations set up their Exchange with regards to rooms?

  Read the article

• Virtualbox won't run Fedora 10 64 bit iso

  - by David

  I am using VirtualBox on a Ubuntu 10.04 64bit host. I would like to install a Fedora 64bit guest. When I try to run the 64bit live cd, it says "Automatic boot in 10 seconds..." after which I get a blue background with no menu options. I am familiar with Ubuntu but not Fedora. I have been able to install a Fedora 32 bit system just fine. Any suggestions? I am trying to run an rpm that won't run in Ubuntu even using alien. .

  Read the article

• Best way to use mod_rewrite to replace WordPress pages with static files

  - by David Moles

  Here's the situation: I've got an old WordPress installation that I'd like to archive as static files, but I'd also like to preserve old URLs. I've already created the static archive with wget and sorted out the filenames and links. Now I'd like to configure Apache to intercept requests for the old dynamic URL and replace them with the new static one, e.g.: http://www.example.org/log/?p=1234 or http://www.example.org/log/index.php?p=1234 should redirect to http://www.example.org/log/archives/1234.html I've tried adding the following to the VirtualHost config for example.org, but to no effect -- I just get the PHP page. RewriteCond %{REQUEST_URI} /log/ RewriteCond %{QUERY_STRING} p=([^&;]*) RewriteRule ^/$ http://%{SERVER_NAME}/log/archives/%1.html [R,L] I've enabled logging and I can see what look like other rules being applied, but not this one. None of my other guesses at match patterns for %{REQUEST_URI} seem to have any effect either (log, log/, log.*, even .*). I'm new to mod_rewrite and this is mostly cargo cult, so I'm pretty sure I've gotten it wrong. Anyone know what I should be doing here?

  Read the article

• Force ntpd to make changes in smaller steps

  - by David Wolever

  The NTP documentation says: Under ordinariy conditions, ntpd adjusts the clock in small steps so that the timescale is effectively continuous and without discontinuities - http://doc.ntp.org/4.1.0/ntpd.htm However, this is not at all what I have noticed in practice. If I manually change the system time backwards or forwards 5 or 10 seconds then start ntpd, I notice that it adjusts the clock in one shot. For example, with this code: #!/usr/bin/env python import time last = time.time() while True: time.sleep(1) print time.time() - last last = time.time() When I first change the time, I'll notice something like: 1.00194311142 8.29711604118 1.0010509491 Then when I start NTPd, I'll see something like: 1.00194311142 -8.117301941 1.0010509491 Is there any way to force ntpd to make the adjustments in smaller steps?

  Read the article

• Outlook keeps dropping 'Other Calendars'

  - by David Gard

  We run Exchnage 2010 with Outlook 2007, and we have public calendars that users are able to 'Add to favorites...' - these are then shown under 'Other Calendars' when a user clicks their 'Calendar' tab. The issue we are having is that these calendars drop off every now and again. Looking under 'Public Folders - Favorites', I can see that the calendars are there, but Outlook doesn't seem to know that they are calendars any more. Simply clicking on one of them to open it changes the icon to that of a 'Folder containing calendar items' for each of the favorite items, and closing and reopening Outlook gets them back under 'Other Calendars' My question is this - how can I make Outlook stop forgetting that these public folders are calendars? Thanks.

  Read the article

• Allowing outbound traffic with APF/iptables for OpenVZ container

  - by David

  I have apf installed on a OpenVZ container (proxmox 2.1). The config is pretty much vanilla and things are working. My external services like ssh and http are working. My problem is that all outbound traffic on http/https is blocked. How do I allow all outbound traffic for http/https. If I change EGF to 1 like this, all inbound and outbound traffic gets blocked EGF="1" EG_TCP_CPORTS="21,25,80,443,43,53" EG_UDP_CPORTS="20,21,53" EG_ICMP_TYPES="all" I opened a single outbound rule with the following # /usr/local/sbin/apf -a downloads.wordpress.org How do I allow all outbound traffic on http/https without blocking all traffic? Why would I allow all inbound ssh/http traffic and block all outbound traffic?

  Read the article

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• How to limit router bandwidth?

  - by David

  Hello, Is there a way to configure my (D-Link DIR-615) router to throttle down the allowed bandwidth after a certain amount of bandwidth has been used? For instance, I want my router to operate normally up to 20GB. After 20GB I want the router to limit bandwidth to a fraction of the normal speed (perhaps 1/5th). I live in Canada, so in about a month, everyone is going to be billed based on the amount they used (usage based billing). Instead of the unlimited bandwidth that I am enjoying now, most people will be capped at 25GB and will have to fork out $2/GB of over usage. Thank you in advance for the help.

  Read the article

• Merge Publication Data Partition Snapshot generation

  - by David Osborn

  I have a merge publication in SQL 2008 R2 with data partitions and I am wondering when I should generate the snapshots for the data partitions. I get an error sometimes when bringing a new subscribe online related to the partition snapshot being out of date and I am wondering if this has to do with the publication snapshot being scheduled at the same time as the partition snapshots. I'm not really sure how the partition snapshot gets generated, but it appears maybe it is getting generated before the publication snapshot. If this is the case how should I be scheduling the partition snapshots to get generated? Should I set them to run x number of minutes after the publication snapshot? this seems kind of poor to do in case the publication snapshot takes awhile or fails. It seems to me the publication snapshot should just run the data partition snapshot agents when it is done if this is the case.

  Read the article

• error while loading shared libraries Dicom Store SCU / Echo SCU

  - by David Just

  I am running a dicom receiver on a Centos 6 box on top of a Xen server. If I attempt to send data to it from a remote server I get the following error: storescp: relocation error: /lib/libresolv.so.2: symbol memcpy, version GLIBC_2.0 not defined in file libc.so.6 with link time reference If I send data to the server locally it works, but sending to it from remote gives the above error. I do not think this is a problem that is specific to the storescp server.

  Read the article

• Moving SQL 2008 from 2003 OS to virtual 2012 OS

  - by David

  If we wanted to move SQL 2008 from a 2003 OS to a virtual 2012 OS (using VM Ware), does anyone know if there are any licensing or technical problems that would get in the way? All the instructions I've seen on moving SQL server from one machine to another assume the new machine has the same OS. I realize that there are licences have more cores and fail over capability, but for now we are fine with a simple installation.

  Read the article

• What is fastest way to backup a disk image over LAN?

  - by David Balažic

  Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

  Read the article

• Ubuntu-style Multiple Desktops for Mac OS X

  - by David Brown

  Is it possible to set up multiple desktops on a Mac?

  Read the article

• Automatically mount partition when needed

  - by David Parunakian

  Hello, Can anyone suggest a method of mounting a partition (e.g. an NFS share) when a user changes into the directory it is set to be mounted to, and not on the system startup? So far I've been unable to propose such a method, aside from editing BASH built-in cd implementation and forcing an fstab/mtab check before the working directory is actually changed.

  Read the article

• Is there a simpler way to log into a local account on a domain workstation?

  - by David

  Occasionally I need to log into a local machine account on a Windows workstation joined to our domain. The syntax for specifying a domain account looks like this: DOMAINNAME\myusername whereas the syntax for logging into a local account is HOSTNAME\myusername The problem is that I often don't know the host name off the top of my head. It is possible to find out by clicking the "How do I log onto another domain" link, but this requires me to memorize or write down an often cryptic hostname. Is there another, simpler way to do this?

  Read the article

• Wireless controllers vs wireless usb hub

  - by David Jensen

  For my htpc i currently only have a steerin wheel as a controller. This is wired and it looks really bad having extended usb wires from the tv to the table. However im thinking of bying some new Gamepads and now comes the question. Should i buy wireless ones or wired and connect them to a wireless usb hub? Having a wireless hub would let me manage my gamepads easily from the couch. A wireless hub also allows me to connect other things that are not input devices from the couch. However im wondering if wireless usb hubs may not be made for input devices in the way that they may not have 100% uptime and probably some delay. Am i right about this?

  Read the article

• Windows XP Activation Issues

  - by David

  Related to my older question: Get xp product key from boot Thanks for the help on that one. So, in the end, i couldn't get into my harddrive because i didn't have the available hardware to hook it up to another computer to get the old activation key. So, instead, i entered another activation key (i know, naughty) in hopes that there would be a way to retrieve the old one, restore point or something afterwords. What legal ways can I get xp re-activated after a repair when I don't have any record of my activation key? for those who think im just trying to crack it, your wrong: Got a virus, which stopped me from getting into windows Got AVG Anti Virus, which stopped me from getting into safe mode Got a 2 year old, who decided to rip-off and chew my activation sticker on my computer (nice one). Repaired windows installation thinking i wouldn't be asked to re-enter the activation key, to find that i was.

  Read the article

• Can I re-attach SSH key forwarding through a disconnected Screen session?

  - by David Mackintosh

  I have a laptop on which I have pageant (the PuTTy SSH key agent) running. If I ssh to a system and launch screen, the ssh key forwarding works properly. However, if I disconnect from that screen session, log off, then later reconnect -- the key forwarding doesn't work any more. I am presuming that this is because when I reconnect the key forwarding is set up on different ports for the new ssh session than was the old one. Is there a way to teach an individual screen window to reconnect to the agent forwarding so that I can use my key to forward again?

  Read the article

• How to add linked Oracle server to SQL 2008 Express?

  - by David.Chu.ca

  I have tried to download Oracle Client 11g both 32 & 64 packages to Windows 2008 R2 with SQL server 2008 Express. However, I still cannot see Oracle provider in SQL server by using sa log in. Not sure if is it possible to do it for SQL Server express 2008? Any advice to do it? I followed installations from this article: Making Linked Server Connection Between SQL Server 64 Bit & Oracle 32 Bit | MS SQL World After installation and reboot the Windows, I still cannot see the Oracle provider in linked provider in SQL server.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• Bringing TechNet licensed server into production

  - by David Heggie

  I am currently trialling an install of Windows Server 2008R2 + SQL Server 2008 R2 using license keys from my company's TechNet subscription. If the trial is successful, I'd like to bring the server into production as is (there's a lot of config needed for it that I don't want to repeat) so my question really is is it possible to change the Windows and SQL server licenses from TechNet ones to "proper" volume licenses and legally use the server in production? Or do I have to reinstall everything with volume licences?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >