Search Results

Search found 1897 results on 76 pages for 'dd dong'.

Page 48/76 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Why does a zip file appear larger than the source file especially when it is text?

  - by PeanutsMonkey

  I have a text file that is 19 bytes in size and having compressed the file using zip and 7zip, it appears to be larger. I had a read of the question on Why is a 7zipped file larger than the raw file? as well as Why doesn't ZIP Compression compress anything? but considering the file is not already compressed I would have expected further compression. Attached is a screenshot. EDIT0 I took the example further by creating a file that contained random data as follows dd if=/dev/urandom of=sample.log bs=1G count=1 and attempted to compress the file using both zip and 7zip however there were no compression gains. Why is that?

  Read the article

• Arch Linux shows a blinking cursor instead of a booting installer

  - by fakedrake

  Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• List/remove files, with filenames containing string that's "more than a month ago"?

  - by Martin Tóth

  I store some data in files which follow this naming convention: /interesting/data/filename-YYYY-MM-DD-HH-MM How do I look for the ones with date in file name < now - 1 month and delete them? Files may have changed since they were created, so searching according to last modification date is not good. What I'm doing now, is filter-ing them in python: prefix = '/interesting/data/filename-' import commands names = commands.getoutput('ls {0}*'.format(prefix)).splitlines() from datetime import datetime, timedelta all_files = map(lambda name: { 'name': name, 'date': datetime.strptime(name, '{0}%Y-%m-%d-%H-%M'.format(prefix)) }, names) month = datetime.now() - timedelta(days = 30) to_delete = filter(lambda item: item['date'] < month, all_files) import os map(os.remove, to_delete) Is there a (oneliner) bash solution for this?

  Read the article

• FTP script download from linux to windows

  - by user53864

  I'm using following FTP script on windows xp to download zip files from ubuntu cloud servers. A zip file is created every day on ubutnu servers and I will download it to windows via this ftp script. I run this script everyday manually as I have to edit the last line(mget /usr/backup_02-11-2010.Zip) of the script to match today's date. I want to edit this script so that it will download only today's zip file at the scheduled time without needing to edit it everyday, when scheduled. It's clear that date is appended to the zip files and is in the format dd-mm-yyyy. Need help... open server-ip-here username-here user-password-here lcd C:\Backup\files bin hash prompt mget /usr/backup_02-11-2010.zip

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• Rename multiple files as "Modified Date/Time" using cmd or Powershell

  - by Mehper C. Palavuzlar

  I have hundreds of JPG files in a folder. I want to rename each file so that the file name is replaced with "Modified Date/Time" of that file, namely DD.MM.RRRR.HH.MM.jpg. For example, Before After 001.jpg 11.01.2011.16.58.jpg 002.jpg 12.01.2011.09.32.jpg 003.jpg 14.01.2011.12.41.jpg ... ... Since colon (:) cannot be used in file names, the colon between HH and MM must be replaced with a period. I don't want to use a 3rd party tool. Can you provide me with the code to achieve this in Powershell or command line?

  Read the article

• create log for an encrypted tar

  - by magiza83

  I want to create an encrypted tar but also I want to have a log of what tar has compressed, I'm using the following command: tar -cvvf - --files-from=/root/backup.cfg | openssl des3 -salt -k backuppass | dd of=/root/tmp/back.encrypted But I need to have a log of tar's stdout. I don't know how to get it, because If I use "" in tar command openssl result is not correct. I've also checked tar manual hoping to find some option to write stdout to a file, but I have found nothing. any help? thanks & Regards.

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• Creating a folder named after the current date and time

  - by lowerkey

  I'm trying to create a powershell script that creates a new folder with the current date (formatted as yyyy-MM-dd) as a name. Here's what I have so far: PS C:\Users\me\Desktop> powershell.exe -command "new-item ($(get-location) + (Get-Date).year + "-" + (Get-Date).month + "-" + (Get-Date).day) -type directo ry" Die Benennung "C:\Users\me\Desktop" wurde nicht als Name eines Cmdlet, ein er Funktion, einer Skriptdatei oder eines ausführbaren Programms erkannt. Überp rüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern ent halten), und wiederholen Sie den Vorgang. Bei Zeile:1 Zeichen:35 + new-item (C:\Users\me\Desktop <<<< + (Get-Date).year + - + (Get-Date). month + - + (Get-Date).day) -type directory + CategoryInfo : ObjectNotFound: (C:\Users\j.moore\Desktop:String ) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

  Read the article

• How to extract .raw backup of Windows to a partition?

  - by JamerTheProgrammer

  I have a backup of a Windows 7 drive (virtualbox install) made in .raw format and I want to extract it to my empty partition ready for Windows. Im using OSX. Any ideas? I have tried this: sudo dd if=/Volumes/DATA/bootcamp.raw of=/dev/disk0s6 Which works fine but when I reboot (im on a hackintosh so im using the Chameleon boot loader) I get the normal Chameleon boot menu but with an unknown GPT partition (thats what its called) and If I select that it says: Missing Operating system. Is the MBR broken on that partition?

  Read the article

• How to create a Windows 7 installation usb from Linux or Mac?

  - by Shane

  I have a Windows 7 installation DVD that came with a computer with no optical drive. I have an empty USB thumb drive. I have access to two computers with optical drives, one running Linux and the other running Mac OS X. Notably, I do not have access to any Windows computer at this time. With the tools that I have, how can I create a thumb drive that I can boot with and install Windows 7? Do I have to look out for anything when making the ISO from the DVD (DRM or anything)? After the ISO is made, will UNetbootin work? How about dd?

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• A raw dump from a corrupted large file

  - by Masoud M.

  I have a large .rar file inside partion D (Windows7/NTFS). It's corrupted due to bad sector (I think) and when I copy it to another place (External-HDD) the system freezes after 88% of progress. I even tried to copy it with my Ubuntu and same problem occurred. Also I tried chkdsk and it dosen't fix it. I think my last chance is dump that file with a tool which ignores bad sectors and create a raw copy of it. Then I will repair the file with rar tools. But I can not found a tool to raw dump a specific file. (In linux there is dd tool but it dumps all partition and I can not use it) So, Is somebody know a tool to do a raw dump from a file?

  Read the article

• How to accelerate and notice failure of potentially faulty disks

  - by rainier

  Hey, I got a bunch of 'used' servers, whose disks should have been checked, but they have been shipped around the county in crate which can't help. I just had one disk go bad (despite being mirrored, currently trying to get more details). The server was fine for about a week before everything ground to a halt this afternoon. Is there any way 'accelerate' the failure of faulty disks, with the goal of bringing the disk to failure before we launch production services? Would doing lots of I/O with 'dd' or 'iozone' be a good way to test these potentially faulty disks? Any other tests/tools that would help recognized failures before they happen?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• ext4 loopback device, Buffer I/O Error on reboot

  - by cvb

  I am trying to mount a loopback device on my ext4 formatted ssd drive. I get these errors when I reboot on Linux kernel 2.6.38.8 Buffer I/O error on device loop1, logical block 0 Here is what I do: dd if=/dev/zero of=/mnt/s/lodev bs=4096 count=250000 mkfs.ext4 /mnt/s/lodev mount -n -o loop,rw /mnt/s/lodev /mnt/test The loopback mount is successful, but on reboot I get errors as mentioned above. Even mouting with 'sync','data=writeback' does not help. I tried to losetup a device, but see the same behavior. I also reformatted the base device and created the loopback device and mounted as above, I still see these errors. I do not see them when I format them as vfat. Appreciate any suggestions on this problem.

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• Automated VLAN creation with residential Wireless devices

  - by Zephyr Pellerin

  We've got a few WRT devices from Linksys here, and the issue has arisen to deploy them in a relatively small environment, However, in the interest of manageability we'd like to be able to automatically VLAN (ideally NOT subnet) every user from one another. It seems obvious to me that the default firmware isn't capable of this - can OpenWRT/Tomato/DD-WRT support any sort of functionality such that new users are automatically VLANed or otherwise logically separated from other users? It seems like there's an easy IPtables or PF solution here, but I've been wrong before. (If that seemed a little ambiguous, heres an example) User 1 sends DHCP request to server, new VLAN (We'll call VLAN 1) is created, user is placed in that VLAN. Then, user 2 sends a DHCP request and is placed in VLAN 2 etc. etc.

  Read the article

• Make exact copy of USB stick [closed]

  - by Andrius Palivonas

  There's this school software on a USB drive. It only runs, when the stick they gave is plugged in. Cloning the drive with dd command didn't work. I'm guessing it checks the hardware ID of the flash drive. Is there any way to change drives information? I guess not, but is it possible to create a virtual flash drive with exactly same hardware id and all other read-only information that the software is most probably checking. EDIT: The paper math books we have dont' have answers. So when I'm doing homework I have no idea if did it right. The electronic version does have the answers. The publisher didn't put them into paper version because of simple reason - money. They would have to republish the book if some answers are found to be wrong. So I feel no shame trying to pirate that software, because publishers are ruining our math education.

  Read the article

• Linux Raid: Can mdadm --grow a raid1 while mounted?

  - by Chris

  I have 2 500gb drives in a RAID1 setup that I needed to upgrade for more space. I mdadm --fail'ed each drive in turn and I used dd to copy each drive to it's respective larger drive (2tb each), removed the smaller drives and replaced them with the larger drives, and reassembled the array and forced a resync. So now I've got a 500gb RAID1 sitting on 2TB drives, and wish to grow them. The plan is to use mdadm --manage /dev/md0 --grow to grow them, then boot a rescue cd, assemble the array under that environment, and do the resize2fs on them. Can I use mdadm --grow on a mounted and live filesystem? Also, do I need more options to make sure the grow operation stays raid1?

  Read the article

• Restoring factory recovery partition (samsung)

  - by user974896

  I have upgraded the HDD in a Samsung laptop and would like to restore the "Press F4 for recovery" partition. My new disk has three partitions, System, Windows, and Recovery. I did a dd of the recovery partition from the old HDD to the new. I also set the diag flag on the new HDD. F4 recovery still is not working. tldr: I mapped my new disk like my old disk with the exception of exact sizes. I did the recover partition from old to new via livecd. F4 recovery does not work

  Read the article

• Recover Partition-Table still present in running system

  - by theomega

  Hy, I accidentially overwrote the first 1M of my harddisk on linux (using dd). So, the partition-table is gone. I can still access all partition (except the first one) using /dev/sda2 (and so on), so the data is still there. I only need the partition boundaries to restore the table. How can I do this? The Linux-Kernel must still know them because all mount-points still work. fdisk -l /dev/sda doesn't work because it acctualy reads the partition table. Thanks!

  Read the article

• Windows 7, file properties, date modified, how do you show seconds?

  - by Jordan W.

  Anyone know a way to immediately show the seconds of a file's date modified property in the GUI? So if you create a file, any file in any directory, right-click and choose Properties, the date modified (if it's recent) will say something like "dd/mm/yyy hh:mm, one minute ago" - reminder this is in Windows 7. Windows XP did it normally. Then they changed something. If you wait a while, eventually you'll see the seconds, I'm not sure how long a while is, but this is incredibly annoying if you want to troubleshoot something that relies on the seconds of timestamps... is there a setting? registry key I can change perhaps? I'm literally using Chrome, pasting in the path of the directory to be able to see the seconds quickly (as a workaround) but would be nice to be able to use Win7.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >