Search Results

Search found 1653 results on 67 pages for 'defaults'.

Page 48/67 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Installing the Updated XP Mode which Requires no Hardware Virtualization

  - by Mysticgeek

  Good news for those of you who have a computer without Hardware Virtualization, Microsoft had dropped the requirement so you can now run XP Mode on your machine. Here we take a look at how to install it and getting working on your PC. Microsoft has dropped the requirement that your CPU supports Hardware Virtualization for XP Mode in Windows 7. Before this requirement was dropped, we showed you how to use SecureAble to find out if your machine would run XP Mode. If it couldn’t, you might have gotten lucky with turning Hardware Virtualization on in your BIOS, or getting an update that would enable it. If not, you were out of luck or would need a different machine. Note: Although you no longer need Hardware Virtualization, you still need Professional, Enterprise, or Ultimate version of Windows 7. Download Correct Version of XP Mode For this article we’re installing it on a Dell machine that doesn’t support Hardware Virtualization on Windows 7 Ultimate 64-bit version. The first thing you’ll want to do is go to the XP Mode website and select your edition of Windows 7 and language. Then there are three downloads you’ll need to get from the page. Windows XP Mode, Windows Virtual PC, and the Windows XP Mode Update (All Links Below). Windows genuine validation is required before you can download the XP Mode files. To make the validation process easier you might want to use IE when downloading these files and validating your version of Windows. Installing XP Mode After validation is successful the first thing to download and install is XP Mode, which is easy following the wizard and accepting the defaults. The second step is to install KB958559 which is Windows Virtual PC.   After it’s installed, a reboot is required. After you’ve come back from the restart, you’ll need to install KB977206 which is the Windows XP Mode Update.   After that’s installed, yet another restart of your system is required. After the update is configured and you return from the second reboot, you’ll find XP Mode in the Start menu under the Windows Virtual PC folder. When it launches accept the license agreement and click Next. Enter in your log in credentials… Choose if you want Automatic Updates or not… Then you’re given a message saying setup will share the hardware on your computer, then click Start Setup. While setup completes, you’re shown a display of what XP Mode does and how to use it. XP Mode launches and you can now begin using it to run older applications that are not compatible with Windows 7. Conclusion This is a welcome news for many who want the ability to use XP Mode but didn’t have the proper hardware to do it. The bad news is users of Home versions of Windows still don’t get to enjoy the XP Mode feature officially. However, we have an article that shows a great workaround – Create an XP Mode for Windows 7 Home Versions & Vista. Download XP Mode, Windows Virtual PC, and Windows XP Mode Update Similar Articles Productive Geek Tips Our Look at XP Mode in Windows 7Run XP Mode on Windows 7 Machines Without Hardware VirtualizationInstall XP Mode with VirtualBox Using the VMLite PluginUnderstanding the New Hyper-V Feature in Windows Server 2008How To Run XP Mode in VirtualBox on Windows 7 (sort of) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

  Read the article

• UPK 3.6.1 (is Coming)

  - by marc.santosusso

  In anticipation of the release of UPK 3.6.1, I'd like to briefly describe some of the features that will be available in this new version. Topic Editor in Tabs Topic Editors now open in tabs instead of separate Developer windows. This offers several improvements: First, the bubble editor can be docked and resized in the same way as other editor panes. That's right, you can resize the bubble editor! The second enhancement that this changes brings is an improved undo and redo which allows each action to be undone and redone in the Topic Editor. New Sound Editor The topic and web page editors include a new sound editor with all the bells and whistles necessary to record, edit, import, and export, sound. Sound can be captured during topic recording--which is great for a Subject Matter Expert (SME) to narrate what they're recording--or after the topic has been recorded. Sound can also be added to web pages and played on the concept panes of modules, sections and topics. Turn off bubbles in Topics Authors may opt to hide bubbles either per frame or for an entire topic. When you want to draw a user's attention to the content on the screen instead of the bubble. This feature works extremely well in conjunction with the new sound capabilities. For instance, consider recording conceptual information with narration and no bubbles. Presentation Output UPK content can be published as a Presentation in Microsoft PowerPoint format. Publishing for Presentation will create a presentation for each topic published. The presentation template can be customized Using the same methods offered for the UPK document outputs, allowing your UPK-generated presentations to match your corporate branding. Autosave and Recovery The Developer will automatically save your work as often as you would like. This affords authors the ability to recover these automatically saved documents if their system or UPK were to close unexpectedly. The Developer defaults to save open documents every ten minutes. Package Editor Enhancement Files in packages will now open in the associated application when double-clicked. Authors can also choose to "Open with..." from the context menu (AKA right click menu.) See It! Window See It! mode may now be launched in a non-fullscreen window. This is available from the kp.html file in any Player package. This version of See It! mode offers on-screen navigation controls including previous frame, next frame, pause etc. Firefox Enhancments The UPK Player will now offer both Do It! mode and sound playback when viewed using Firefox web browser. Player Support for Safari The UPK Player is now fully supported on the Safari web browser for both Mac OS and Windows platforms. Keep document checked out Authors may choose to keep a document checked out when performing a check in. This allows an author to have a new version created on the server and continue editing. Close button on individual tabs A close button has been added to the tabs making it easier to close a specific tab. Outline Editor Enhancements Authors will have the option to prevent concepts from immediately displaying in the Developer when an outline item is selected. This makes it faster to move around in the outline editor. Tell us which feature you're most excited to use in the comments.

  Read the article

• How To Rip an Audio CD to FLAC with Foobar2000

  - by Mysticgeek

  Foobar2000 is a great audio player that is fully customizable, is light on system resources, and contains a lot of tools and features. Today we show you how to use it to rip an audio CD to FLAC format. Note: For this tutorial we’re going to assume this is the first time you’re ripping a disc with Foobar2000. We’re running it on Windows 7 Ultimate 64-bit. Install Foobar2000 and FLAC First download and install Foobar2000 (link below). The main thing you’ll want to make sure to enable during the install process is Audio CD Support… And the freedb Tagger which are located under Optional Features, then continue through the rest of the install wizard. Next you need to install the latest version of the FLAC codec (link below) following the defaults. Rip Audio CD To rip a CD, place it in your CDROM drive, launch Foobar2000 and click File \ Open Audio CD. Select the appropriate CD drive and click the Rip button. Next you’ll want to lookup the disc information with freedb…or you can manually enter in the track data if it’s a custom disc. Select the proper tag information in the freedb tagger window, then click Update files. The data will be entered in, make sure the radio button next to Go to the Converter Setup dialog is selected, and click the Rip button. In the Converter Setup screen, here you can select the output format, where in our case we’re selecting FLAC. In this window you can choose several other options like the output path, merging the tracks into one or individual files…etc. When you have those settings completed click OK. Next you’ll need to find flac.exe which is located wherever you installed it. On our 64-bit Windows 7 system the default path is C:\Program Files (x86)\FLAC Now wait while your CD is ripped and converted to FLAC. You’ll get a Converter Status Report…after you’ve checked it over you can close out of it. If you set the option to show the output files after conversion you can take a look, make sure all tracks were converted, and play them right away if you want. You can play the tracks in Foobar2000 or any player that supports FLAC. If you want to use WMC or WMP see our article on how to play FLAC files in Windows 7 Media Center or Player. That’s all there is to it! If you’re a fan of Foobar2000 and enjoy your music converted to FLAC format, Foobar2000 does the job quite well. There are a lot of customizations and tools you can use in Foobar2000 that we’ll be taking a look at in future articles. For more information check out our look at this fully customizable music player. Foobar2000 run on XP, Vista, and Windows 7 Links Download Foobar2000 Download FLAC Similar Articles Productive Geek Tips Using Ubuntu: What Package Did This File Come From?Easily Change Audio File Formats with XRECODEFoobar2000 is a Fully Customizable Music PlayerConvert Virtually Any Audio Format with XRECODE IIExtract Audio from a Video File with Pazera Free Audio Extractor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

  Read the article

• Visual Studio 2010 Beta 2 Startup Failures

  - by Rick Strahl

  I’ve been working with VS 2010 Beta 2 for a while now and while it works Ok most of the time it seems the environment is very, very fragile when it comes to crashes and installed packages. Specifically I’ve been working just fine for days, then when VS 2010 crashes it will not re-start. Instead I get the good old Application cannot start dialog: Other failures I’ve seen bring forth other just as useful dialogs with information overload like Operation cannot be performed which for me specifically happens when trying to compile any project. After a bit of digging around and a post to Microsoft Connect the solution boils down to resetting the VS.NET environment. The Application Cannot Start issue stems from a package load failure of some sort, so the work around for this is typically: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSkipPkgs In most cases that should do the trick. If it doesn’t and the error doesn’t go away the more drastic: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSettings is required which resets all settings in VS to its installation defaults. Between these two I’ve always been able to get VS to startup and run properly. BTW it’s handy to keep a list of command line options for Visual Studio around: http://msdn.microsoft.com/en-us/library/xee0c8y7%28VS.100%29.aspx Note that the /? option in VS 2010 doesn’t display all the options available but rather displays the ‘demo version’ message instead, so the above should be helpful. Also note that unless you install Visual C++ the Visual Studio Command Prompt icon is not automatically installed so you may have to navigate manually to the appropriate folder above. Cannot Build Failures If you get the Cannot compile error dialog, there is another thing that have worked for me: Change your project build target from Debug to Release (or whatever – just change it) and compile again. If that doesn’t work doing the reset steps above will do it for me. It appears this failure comes from some sort of interference of other versions of Visual Studio installed on the system and running another version first. Resetting the build target explicitly seems to reset the build providers to a normalized state so that things work in many cases. But not all. Worst case – resetting settings will do it. The bottom line for working in VS 2010 has been – don’t get too attached to your custom settings as they will get blown away quite a bit. I’ve probably been through 20 or more of these VS resets although I’ve been working with it quite a bit on an internal project. It’s kind of frustrating to see this kind of high level instability in a Beta 2 product which is supposedly the last public beta they will put out. On the other hand this beta has been otherwise rather stable and performance is roughly equivalent to VS 2008. Although I mention the crash above – crashes I’ve seen have been relatively rare and no more frequent than in VS 2008 it seems. Given the drastic UI changes in VS 2010 (using WPF for the shell and editor) I’m actually impressed that the product is as stable as it is at this point. Also I was seriously worried about text quality going to a WPF model, but thankfully WPF 4.0 addresses the blurry text issue with native font rendering to render text on non-cleartype enabled systems crisply. Anyway I hope that these notes are helpful to some of you playing around with the beta and running into problems. Hopefully you won’t need them :-}© Rick Strahl, West Wind Technologies, 2005-2010

  Read the article

• jQuery Context Menu Plugin and Capturing Right-Click

  - by Ben Griswold

  I was thrilled to find Cory LaViska’s jQuery Context Menu Plugin a few months ago. In very little time, I was able to integrate the context menu with the jQuery Treeview.  I quickly had a really pretty user interface which took full advantage of limited real estate.  And guess what.  As promised, the plugin worked in Chrome, Safari 3, IE 6/7/8, Firefox 2/3 and Opera 9.5.  Everything was perfect and I shipped to the Integration Environment. One thing kept bugging though – right clicks aren’t the standard in a web environment. Sure, when one hovers over the treeview node, the mouse changed from an arrow to a pointer, but without help text most users will certainly left-click rather than right. As I was already doubting the design decision, we did some Mac testing.  The context menu worked in Firefox but not Safari.  Damn.  That’s when I started digging into the Madness of Javascript Mouse Events.  Don’t tell, but it’s complicated.  About as close as one can get to capture the right-click mouse event on all major browsers on Windows and Mac is this: if (event.which == null) /* IE case */ button= (event.button < 2) ? "LEFT" : ((event.button == 4) ? "MIDDLE" : "RIGHT"); else /* All others */ button= (event.which < 2) ? "LEFT" : ((event.which == 2) ? "MIDDLE" : "RIGHT"); Yikes.  The content menu code was simply checking if event.button == 2.  No problem.  Cory offers a jQuery Right Click Plugin which I’m sure works for windows but probably not the Mac either.  (Please note I haven’t verified this.) Anyway, I decided to address my UI design concern and the Safari Mac issue in one swoop.  I decided to make the context menu respond to any mouse click event.  This didn’t take much – especially after seeing how Bill Beckelman updated the library to recognize the left click. First, I added an AnyClick option to the library defaults: // Any click may trigger the dropdown and that's okay // See Javascript Madness: Mouse Events – http: //unixpapa.com/js/mouse.html if (o.anyClick == undefined) o.anyClick = false; And then I trigger the context menu dropdown based on the following conditional: if (evt.button == 2 || o.anyClick) { Nothing tricky about that, right?  Finally, I updated my menu setup to include the AnyClick value, if true: $('.member').contextMenu({ menu: 'memberContextMenu', anyClick: true },             function (action, el, pos) {                 … Now the context menu works in “all” environments if you left, right or even middle click.  Download jQuery Context Menu Plugin for Any Click *Opera 9.5 has an option to allow scripts to detect right-clicks, but it is disabled by default. Furthermore, Opera still doesn’t allow JavaScript to disable the browser’s default context menu which causes a usability conflict.

  Read the article

• Oracle WebCenter Portlet Debugging

  - by Alexander Rudat

  IntroductionThis article describes how to debug a portlets that is already deployed to WebLogic server using Oracle JDeveloper 11g.OverviewThese a Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} re the basic steps involved in remote debugging an WebCenter portlets deployed in WebLogic:Configuration of the WebLogic to support remote debuggingConfiguration of the portlet project in JDeveloperActual debugging of the portletConfiguration of the WebLogicTo start the WebLogic server in debugging mode, there are a couple of configuration changes that need to be done to the WebLogic domain where the portlet is deployed.First we need to edit JVM options of the WebLogic server startup script where the portlet is deployed. Normally the startManagedWebLogic.cmd is used to start this managed server.This startup script is located in the %MIDDLEWARE_HOME%\user_projects\domains\<domain_name>\bin  directory, where %MIDDLEWARE_HOME% is the installation directory of WebLogic.Add the following line before the set JAVA_OPTIONS= line:set REMOTE_DEBUG_JAVA_OPTIONS=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=nChange the set JAVA_OPTIONS= line to read like the one below:set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS% %ADF_JAVA_OPTIONS% %REMOTE_DEBUG_JAVA_OPTIONS%After this changes save the startup script and start the managed server and be sure that you have access to the admin console (for example http://localhost:7001/console).Finally we need to check, that HTTP tunneling is enabled on the managed server. To do this, login to the admin console, select the managed server and select the Protocols tab.Be sure that Enable Tunneling is selected.Configuration of the portletFirst let's create a new run configuration specifically for remote debugging. Double-click the project where you portlets are developed.In the Project Properties select the Run/Debug/Profile page. Click New... to create a new run configuration. In the Create Run Configuration  dialog enter Remote Debugging for the name of the run configuration. Leave the Copy Settings From selection to Default and click OK to create the new run configuration.Once the Remote Debug run configuration is created, select it in the Run Configurations and click Edit... to bring up the Edit Run Configuration dialog. In the Launch Settings page click on the Remote Debugging checkbox to enable remote debugging for this run configuration.Finally select the Remote page and verify that the Protocol is set to Attach to JPDA and the port matches the port specified earlier when configuring WebLogic for remote debugging (defaults to 4000).Actual debugging of the portletTo start the remote debugging profile, right-click on your portlet project and select Start Remote Debugger.Now JDeveloper is asking the host and port specification. If you WebLogic server is installed locally, you can apply the default settings: Set a breakpoint at you java code and run the portal (WebCenter) application, where the portlet is used.That's all, now you are able to debug the portlet java code. Hope you will find all errors in your portlet :-)Referenceshttp://www.oracle.com/technology/products/jdev/howtos/weblogic/remotedebugwls.html

  Read the article

• Backup and Transfer Foobar2000 to a New Computer

  - by Mysticgeek

  If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server.  Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists.   Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• MongoDB usage best practices

  - by andresv

  The project I'm working on uses MongoDB for some stuff so I'm creating some documents to help developers speedup the learning curve and also avoid mistakes and help them write clean & reliable code. This is my first version of it, so I'm pretty sure I will be adding more stuff to it, so stay tuned! C# Official driver notes The 10gen official MongoDB driver should always be referenced in projects by using NUGET. Do not manually download and reference assemblies in any project. C# driver quickstart guide: http://www.mongodb.org/display/DOCS/CSharp+Driver+Quickstart Reference links C# Language Center: http://www.mongodb.org/display/DOCS/CSharp+Language+Center MongoDB Server Documentation: http://www.mongodb.org/display/DOCS/Home MongoDB Server Downloads: http://www.mongodb.org/downloads MongoDB client drivers download: http://www.mongodb.org/display/DOCS/Drivers MongoDB Community content: http://www.mongodb.org/display/DOCS/CSharp+Community+Projects Tutorials Tutorial MongoDB con ASP.NET MVC - Ejemplo Práctico (Spanish):http://geeks.ms/blogs/gperez/archive/2011/12/02/tutorial-mongodb-con-asp-net-mvc-ejemplo-pr-225-ctico.aspx MongoDB and C#:http://www.codeproject.com/Articles/87757/MongoDB-and-C C# driver LINQ tutorial:http://www.mongodb.org/display/DOCS/CSharp+Driver+LINQ+Tutorial C# driver reference: http://www.mongodb.org/display/DOCS/CSharp+Driver+Tutorial Safe Mode Connection The C# driver supports two connection modes: safe and unsafe. Safe connection mode (only applies to methods that modify data in a database like Inserts, Deletes and Updates. While the current driver defaults to unsafe mode (safeMode == false) it's recommended to always enable safe mode, and force unsafe mode on specific things we know aren't critical. When safe mode is enabled, the driver internal code calls the MongoDB "getLastError" function to ensure the last operation is completed before returning control the the caller. For more information on using safe mode and their implicancies on performance and data reliability see: http://www.mongodb.org/display/DOCS/getLastError+Command If safe mode is not enabled, all data modification calls to the database are executed asynchronously (fire & forget) without waiting for the result of the operation. This mode could be useful for creating / updating non-critical data like performance counters, usage logging and so on. It's important to know that not using safe mode implies that data loss can occur without any notification to the caller. As with any wait operation, enabling safe mode also implies dealing with timeouts. For more information about C# driver safe mode configuration see: http://www.mongodb.org/display/DOCS/CSharp+getLastError+and+SafeMode The safe mode configuration can be specified at different levels: Connection string: mongodb://hostname/?safe=true Database: when obtaining a database instance using the server.GetDatabase(name, safeMode) method Collection: when obtaining a collection instance using the database.GetCollection(name, safeMode) method Operation: for example, when executing the collection.Insert(document, safeMode) method Some useful SafeMode article: http://stackoverflow.com/questions/4604868/mongodb-c-sharp-safemode-official-driver Exception Handling The driver ensures that an exception will be thrown in case of something going wrong, in case of using safe mode (as said above, when not using safe mode no exception will be thrown no matter what the outcome of the operation is). As explained here https://groups.google.com/forum/?fromgroups#!topic/mongodb-user/mS6jIq5FUiM there is no need to check for any returned value from a driver method inserting data. With updates the situation is similar to any other relational database: if an update command doesn't affect any records, the call will suceed anyway (no exception thrown) and you manually have to check for something like "records affected". For MongoDB, an Update operation will return an instance of the "SafeModeResult" class, and you can verify the "DocumentsAffected" property to ensure the intended document was indeed updated. Note: Please remember that an Update method might return a null instance instead of an "SafeModeResult" instance when safe mode is not enabled. Useful Community Articles Comments about how MongoDB works and how that might affect your application: http://ethangunderson.com/blog/two-reasons-to-not-use-mongodb/ FourSquare using MongoDB had serious scalability problems: http://mashable.com/2010/10/07/mongodb-foursquare/ Is MongoDB a replacement for Memcached? http://www.quora.com/Is-MongoDB-a-good-replacement-for-Memcached/answer/Rick-Branson MongoDB Introduction, shell, when not to use, maintenance, upgrade, backups, memory, sharding, etc: http://www.markus-gattol.name/ws/mongodb.html MongoDB Collection level locking support: https://jira.mongodb.org/browse/SERVER-1240 MongoDB performance tips: http://www.quora.com/MongoDB/What-are-some-best-practices-for-optimal-performance-of-MongoDB-particularly-for-queries-that-involve-multiple-documents Lessons learned migrating from SQL Server to MongoDB: http://www.wireclub.com/development/TqnkQwQ8CxUYTVT90/read MongoDB replication performance: http://benshepheard.blogspot.com.ar/2011/01/mongodb-replication-performance.html

  Read the article

• Java Script – Content delivery networks (CDN) can bit you in the butt.

  - by Ryan Ternier

  As much as I love the new CDN’s that Google, Microsoft and a few others have publically released, there are some strong gotchas that could come up and bite you in the ass if you’re not careful. But before we jump into that, for those that are not 100% sure what a CDN is (besides Canadian).   Content Delivery Network. A way of distributing your static content across various servers in different physical locations.  Because this static content is stored on many servers around the world, whenever a user needs to access this content, they are given the closest server to their location for this data. Already you can probably see the immediate bonuses to a system like this: Lower bandwidth Even small script files downloaded thousands of times will start to take a noticeable hit on your bandwidth meter. Less connections/hits to your web server which gives better latency If you manage many servers, you don’t need to manually update each server with scripts. A user will download a script for each website they visit. If a user is redirected to many domains/sub-domains within your web site, they might download many copies of the same file. When a system sees multiple requests from the same  domain, they will ignore the download   Those are just a handful of the many bonuses a CDN will give you. And for the average website, a CDN is great choice. Check out the following CDN links for their solutions: Google AJAX Library: http://code.google.com/apis/ajaxlibs/ Microsoft Ajax library: http://www.asp.net/ajaxlibrary/cdn.ashx The Gotcha There is always a catch. Here are some issues I found with using CDN’s that hopefully can help you make your decision. HTTP / HTTPS If you are running a website behind SSL, make sure that when you reference your CDN data that you use https:// vs. http://. If you forget this users will get a very nice message telling them that their secure connection is trying to access unsecure data. For a developer this is fairly simple, but general users will get a bit anxious when seeing this. Trusted Sites Internet Explorer has this really nifty feature that allows users to specify what sites they trust, and by some defaults IE7 only allows trusted sites to be viewed.  No problem, they set your website as trusted. But what about your CDN? If a user sets your websites to trusted, but not the CDN, they will not download those static files. This has the potential to totally break your web site. Pedantic Network Admins This alone is sometimes the killer of projects. However, always be careful when you are going to use a CDN for a professional project. If a network / security admin sees that you’re referencing an outside source, or that a call from a website might hit an outside domain.. panties will be bunched, emails will be spewed out and well, no one wants that.

  Read the article

• Silverlight Cream for March 06, 2011 -- #1054

  - by Dave Campbell

  In this Back from the Summit Issue, I am overloaded with posts to choose from. Submittals go first, but I'll eventually catch up... hopefully by MIX :) : Ollie Riches(-2-), Colin Eberhardt, John Papa, Jeremy Likness, Martin Krüger, Joost van Schaik, Karl Shifflett, Michael Crump, Georgi Stoyanov, Yochay Kiriaty, Page Brooks, and Deborah Kurata. Above the Fold: Silverlight: "ClassifiedCabinet: A Quick Start" Georgi Stoyanov WP7: "Easy access to WMAppManifest.xml App properties like version and title" Joost van Schaik Multiple: "Flashcards.Show Version 2 for the Desktop, Browser, and Windows Phone" Yochay Kiriaty Shoutouts: Mohamed Mosallem delivered an online session at the Second Riyadh Online Community Summit: Silverlight 4.0 with SharePoint 2010 John-Daniel Trask posted about a release of a new set of tools released for WP7 development... there's a free trial, so definitely worth a look: Mindscape Phone Elements released! From SilverlightCream.com: WP7Contrib: Trickling data to a bound collection Ollie Riches submitted a couple links... first up is this on a way they found to decrease the load on a data template in WP7 to get under the 90 mb limit and then added their solution to the WP7Contrib lib. WP7Contrib: Why we use SilverlightSerializer instead of DataContractSerializer Ollie Riches' next submittal compares the performance of the SilverlightSerializer & DataContractSerializer on the WP7 platform. MVVM Charting – Binding Multiple Series to a Visiblox Chart Colin Eberhardt sent me this post where he describes binding multiple series to a chart with no code-behind... great long multi-phase tutorial all with source. Silverlight TV 64: Dive into 64bit Support, App Model and Security John Papa has Nick Kramer of the Silverlight team up for his latest Silverlight TV episode, discussing some cool new Silverlight stuff: 64-bit support, multiple windows, etc. Building a Windows Phone 7 Application with UltraLight.mvvm Jeremy Likness has a pre-summit tutorial up on his UltraLight.mvvm project, and how he would use it to build a WP7 app... great to meet you, Jeremy! How to: Storyboard only start with the conspicuousness of the application in the browser window Martin Krüger continues his Storyboard startup solutions with this one about what to do if the Silverlight app is small or simply an island on an html page. Easy access to WMAppManifest.xml App properties like version and title Joost van Schaik posted about the WP7 manifest file and how you can get access to that information at runtime... why you ask? How about version number or title? Be sure to read the helpful hints in the last paragraph too! Mole 2010 Released Karl Shifflett, Josh Smith, and others have released the latest version of Mole... well worth the money in my opinion, if only it worked for Silverlight! (not their fault) Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010 Michael Crump points out an annoyance with the 2011 WP7 tools update... VS2010 defaults to the device rather than the emulator... and he shows us how to get it pointed back to the emulator! ClassifiedCabinet: A Quick Start Georgi Stoyanov posted a QuickStart to a 'ClassifiedCabinet' control posted on CodePlex... check out the demo first, you'll want to read the article after that. He builds a simple project from scratch using the control. Flashcards.Show Version 2 for the Desktop, Browser, and Windows Phone Yochay Kiriaty has a post up about FlashCards.Show version 2 that he worked on with Arik Poznanski and has it now running on the desktop, browser, and WP7, plus you get the source... I've been wanting to write just such an app for WP7, so hey... this saves me some time! A Simple Focus Manager for Jounce Applications Page Brooks has a post up about Jeremy Likness' Jounce... how to set focus to a particular control when a view loads. Silverlight Charting: Formatting the Axis Deborah Kurata is continuing her charting series with this one on setting axis font color and putting the text at an angle... really dresses up the chart! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• &lsquo;Publish&hellip;&rsquo; Resulting in Directory With No Files

  - by ToStringTheory

  I was pulling my hair out with this one…  Which isn’t good considering I have so little of it left!  I had just upgraded to the Windows Azure 1.7 SDK the day before with no problems, and used the upgraded ‘Publish…’ dialog to successfully publish a website to my hard disk for hosting on an internal development server.  However, when trying to deploy another project to my file system, it said it was successful, but there were no files in the directory.  The only difference, the first project was an Azure project, the second was a standard ASP.Net Web Application.  If you installed the Windows Azure 1.7 SDK, you may want to read this. The Problem At first it appears that there is no problem: However you may remember that when publishing a web application, the output window will generally iterate through each of the directories as it copies the files from that directory over.  Sure enough, when looking at the output directory – there are no files, no bin directory, no nothing… Troubleshooting Since one site published and the other did not, I believed that the failure may have been to a failed SQL Server 2012 installation that happened between publish.  I rolled back the installation, however that did not work either.  I also checked the Configuration Manager dialog, and ensured that the projects were selected to actually build (just checking, even though the output said it built them..)  I checked the properties of the solution and the projects, and a selection of files in the project to make sure that they were selected for content…  Nothing seemed to work. I then decided to uninstall the Azure 1.7 SDK to see if that was the culprit.  When I opened the Windows 7 ‘Uninstall a Program’ dialog, I noticed that the Azure SDK came with 2 extra packages that just so happen to be in a Release Candidate state from Microsoft – ‘Microsoft Web Deploy 3.0’ and ‘Microsoft Web Publish – Visual Studio 2010’.  It dawned on me that the publish dialog must not be just for Azure, since it appeared when I tried to deploy the regular web application as well.  Therefore, it must have been an upgrade to the publish mechanism in Visual Studio.  I uninstalled both of the programs and received my old publish dialog once again, and was able to successfully publish the solution above as I had done before. After celebrating solving the problem, I tried reinstalling the Azure package, to see if it would repair the publishing process. Even though it brought back the updated dialogs, it did not publish any files. Instead of uninstalling and retreating, I now KNEW what the cause was, and these were packages not just for Azure. I now knew a product name to search for. The Solution Sure enough, with the correct search term in Google – ‘microsoft web publish no files’, and setting the timeline to 1 week, I found what I needed - Microsoft Connect - Publish Web Application FAILS! (by Andrew Rits). I am surprised that I missed something that ended up being so simple…  In the Configuration Manager, I had the following settings: This is how I had been building and debugging the solution always…  However, apparently when installing the new Web Publishing package, it does things a little differently in its configuration for publishing: You see the difference?  The configuration here is set to ‘x86’ instead of ‘Any CPU’.  Sure enough, as soon as I switched the configuration to ‘Release – Any CPU’, the deployment built and published all of my files as I expected. Conclusion It was a small change, but apparently the new ‘Publish web application’ defaults to the x86 configuration, thereby not copying any of the project/bin files to the publish target directory.  I spent forever trying things, but this small drop down eluded me until I was able to target that the dialog was actually working apparently, I just didn’t have the correct configuration. I hope that this saves you the hours of frustration and hastened hair loss that it caused me…  I also hope that before Microsoft brings this publishing package out of RC status, that they change the behavior of that menu to default to the settings of the old publish menu for the first time. Happy Coding!

  Read the article

• Using the ASP.NET Membership API with SQL Server / SQL Azure: The new &ldquo;System.Web.Providers&rdquo; namespace

  - by Harish Ranganathan

  The Membership API came in .NET 2.0 and was a huge enhancement in building web applications with users, managing roles, permissions etc.,  The Membership API by default uses SQL Express and until Visual Studio 2008, it was available only through the ASP.NET Configuration manager screen (Website – ASP.NET Configuration) or (Project – ASP.NET Configuration) and for every application, one has to manually visit this place to start using the Security and other settings.  Upon doing that the default SQL Express database aspnet.mdf is created to store all the user profiles. Starting Visual Studio 2010 and .NET 4.0, the Default Website template includes the Membership API controls as a part of the page i.e. When you create a “File – New – ASP.NET Web Application” or an “ASP.NET MVC Application”, by default the Login/Register controls are enabled in the MasterPage and they are termed under “ApplicationServices” setting in the web.config file with connection string pointed to the SQL Express database. In fact, when you run the default website and click on “Logon” –> “Register”, and enter the details for registration and click “Register”, that is the time the aspnet.mdf file is created with the tables for Users, Roles, UsersInRoles, Profile etc., Now, this uses the default SQL Express database within the App_Data folder.  If you want to move your Membership information to some other database such as SQL Server, SQL CE or SQL Azure, you need to manually run the aspnet_regsql command and specify the destination database name. This would create all the Tables, Procedures and Views required to handle the Membership information.  Thereafter you can change the connection string for “ApplicationServices” to point to the database where you had run all the scripts. Now, enter “System.Web.Providers” Alpha. This is available as a part of the NuGet package library.  Scott Hanselman has a neat post describing the steps required to get it up and running as well as doing the basic changes  at http://www.hanselman.com/blog/IntroducingSystemWebProvidersASPNETUniversalProvidersForSessionMembershipRolesAndUserProfileOnSQLCompactAndSQLAzure.aspx Pretty much, it covers what the new System.Web.Providers do. One thing I wanted to clarify is that, the new “System.Web.Providers” add a lot of new settings which are also marked as the defaults, in the web.config.  Even now, they use SQL Express as the default database.  But, if you change the connection string for “DefaultConnection” under connectionStrings to point to your SQL Server or SQL Azure, Membership API would now be able to create all the tables, procedures and views at the destination specified (i.e. SQL Server or SQL Azure). In my case, I modified the DefaultConneciton to point to my SQL Azure database.  Next, I hit F5 to run the application.  The default view loads.  I clicked on “LogOn” and then “Register” since I knew there are no tables/users as of then.  One thing to note is that, I had put “NewDB” as the database name in the connection string that points to SQL Azure.  NewDB wasn’t existing and I would assume it would be created before the tables/views/procedures for Membership are created. Once I clicked on the “Register” to register my first username, it took a while and then registered as well as logged in me in.  Also, I went to the SQL Azure Management Portal and verified that there exists “NewDB” which has just been created I could also connect to the SQL Azure database “NewDB” from Management Studio and found that the tables now don’t have the aspnet_ prefix.  The tables were simply Users, Roles, UsersInRoles, Profiles etc., So, with a few clicks and configuration change, I could actually set up the user base for my application on SQL Azure and even make the SessionState, Roles, Profiles being stored in SQL Azure database. The new System.Web.Proivders also required MARS (MultipleActiveResultSets=true) setting since it uses Entity Framework for the DAL operations.  Also, the “Project – ASP.NET Configuration” screen can be used to further create/manage users/roles etc., although the data is stored on the remote database. With that, a long pending request from the community to have the ability to configure and use remote databases for Application users management without having to run the scripts from SQL Express is fulfilled. Cheers !!!

  Read the article

• Increase the size of Taskbar Preview Thumbnails in Windows 7

  - by Matthew Guay

  Taskbar thumbnail previews are incredibly useful in Windows 7, but for some users they may be too small.  Here’s a tool to help you make your taskbar thumbnail previews just like you want them. A few years ago we featured a tool to increase the size of your thumbnail previews in Windows Vista, but unfortunately this application doesn’t work correctly in Windows 7.  However, there is a new tool for Windows 7 that lets you customize your taskbar thumbnail previews even more in Windows 7.  With it, you can change almost anything about your taskbar thumbnail previews.  The default taskbar thumbnails are nice, but may be too small for users with vision problems or with very high resolution monitors.  Whatever your need, this is a great tool to make the thumbnails looks and work just like you want. Let’s get started Download the Windows 7 Taskbar Thumbnail Customizer (link below), and unzip the files.  Run the Windows 7 Taskbar Thumbnail Customizer when you’re done.  Simply double-click on it; you don’t need to run it as administrator. Now, you change the size, spacing, margin, and delay time of your taskbar thumbnails.  The Delay Time setting is very handy; to speed things up, we set it to 0 so there’s no delay between when you mouse-over a taskbar icon to when you see the thumbnail.  Simply drag the slider to the size (or time in the delay settings) you want, and click Apply settings.  Windows Explorer will automatically restart, and your new taskbar thumbnails will be ready to use. Here is the default Windows 7 thumbnail preview of a video playing in Media player: And here’s the taskbar thumbnail enlarged to 380px.  Now you can really watch a video from your taskbar thumbnail. The larger taskbar thumbnails show up a little different in Internet Explorer.  It shows a larger preview of your active tab, and smaller previews of your other tabs.  Notice also that Aero peek shows the tab you’re hovering over in Internet Explorer, but the tab name in IE’s toolbar doesn’t change to the one you’re previewing.   Here we increased the width between the thumbnails, while keeping the thumbnails at their default size.  This could be useful if you have trouble selecting the correct preview, and we can imagine it would be a very useful modification on touch screens. And, if you ever take your changes too far, and want to revert to your default Windows 7 taskbar thumbnail previews, simply run the Customizer again and select Restore Defaults.  Windows Explorer will restart again, and your taskbar thumbnails will be back to their default settings.   Conclusion This tool makes it safe and easy to change the size, spacing, and more of your taskbar thumbnail previews.  And since you can always revert to the default settings, you can experiment without fear of messing up your computer.  If you’d prefer to change the settings manually without using a dedicated application, here’s a list of the registry changes you can make to accomplish this by hand. Link Download the Windows 7 Taskbar Thumbnail Customizer from The Windows Club Vista Users: Increase Size of Windows Vista Taskbar Previews Similar Articles Productive Geek Tips Bounty(Paid!) for Increasing Windows Vista Taskbar Preview SizeGet Vista Taskbar Thumbnail Previews in Windows XPVista Style Popup Previews for Firefox TabsIncrease Size of Windows Vista Taskbar PreviewsWhat is dwm.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

  Read the article

• Beginner Geek: How to Burn an ISO Image to a Disc

  - by Mysticgeek

  There may be a time when you have an ISO image that you need to burn to a CD or DVD for use in a computer or other device. Today we show you how to do it using ImgBurn, ISO Recorder, and Windows Disc Image Burner in Windows 7. You might need to burn an ISO of an operating system, software app, CD, DVD…etc. It doesn’t matter what the ISO image is, burning an image is a fairly straight-forward process and here we’ll take a look at three free options to accomplish it. Using ImgBurn ImgBurn is an awesome free utility that will create ISO images, allow out burn almost anything, and a lot more. Although there are a lot advanced features available, burning an ISO to disc is easy. Download and install ImgBurn (link below) taking the defaults in the install wizard. The main thing to watch for and uncheck during installation is when it offers the worthless Ask Toolbar. The easiest way to use ImgBurn is to burn an image to disc is pop in a blank disc to the CD/DVD drive, right-click on the ISO file, and select Burn using ImgBurn. ImgBurn opens up with the source and destination fields already filled in. You can leave the default settings, then click the Write button. You’ll notice that the ImgBurn Log screen opens, this is by default and is meant to show error messages you may receive during the writing process.   A successful burn! That is all there is to it…click Ok and close out of ImgBurn. Use ISO Recorder ISO Recorder (link below) is another great utility for burning ISO images to disc. They have a version for XP, Vista, and Windows 7 (32 & 64-bit Versions). Pop your blank disc into your CD/DVD drive and right-click on the ISO image file and select Copy image to CD from the Context Menu. In the next screen the image file path is in the Source Image file field. Under Recorder select the drive with your blank disc, select a recording speed and click Next. You’ll see a progress screen while the data is written to the disc and finalizing… That’s it! Your disc will pop out and you can click Finish to close out of ISO Recorder. Use Windows 7 If You’re using Windows 7, use the built in Windows Disc Image Burner feature to burn ISO images to disc. The process is very straight-forward, and for a full walkthrough on this, check out our article on how to burn an ISO image in Windows 7. Conclusion You don’t need an expensive commercial application to burn an ISO image to disc. Using any one of these free utilities will get the job done quite nicely. Download ImgBurn Download ISO Recorder Similar Articles Productive Geek Tips How to Make a Windows Vista Repair Disk If You Don’t Have OneHow to Create a Windows ISO from a Disc Using ImgBurnEasily Burn Discs With BurnAware Free EditionCreate A Windows Home Server Home Computer Restore DiscWhy is Amarok’s "Burn This Album" Disabled in Ubuntu? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows If it were only this easy

  Read the article

• Xorg does not see my monitor EDID

  - by sean farley

  Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

  Read the article

• Apache returns 304, I want it to ignore anything from client and send the page

  - by Ayman

  I am using Apache HTTPD 2.2 on Windows. mod_expires is commented out. Most other stuff are not changed from the defaults. gzip is on. I made some changes to my .js files. My client gets one 304 response for one of the .js files and never gets the rest. How can I force Apache to sort of flush everything and send all new files to the client? The main html file includes these scripts in the head section of the main page: <script src="js/jquery-1.7.1.min.js" type="text/javascript"> </script> <script src="js/jquery-ui-1.8.17.custom.min.js" type="text/javascript"></script> <script src="js/trex.utils.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.core.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.codes.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.emv.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.b24xtokens.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.iso.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.span2.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.amex.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.abi.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.barclays.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.bnet.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.visa.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.atm.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.apacs.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.pstm.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.stm.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.thales.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.fps-saf.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.fps-iso.js" type="text/javascript" charset="utf-8"></script> <script src="js/trex.app.js" type="text/javascript" charset="utf-8"></script> Apache access log has the following: [07/Jul/2013:16:50:40 +0300] "GET /trex/index.html HTTP/1.1" 200 2033 "-" [07/Jul/2013:16:50:40 +0300] "GET /trex/js/trex.fps-iso.js HTTP/1.1" 304 [08/Jul/2013:07:54:35 +0300] "GET /trex/index.html HTTP/1.1" 304 - "-" [08/Jul/2013:07:54:35 +0300] "GET /trex/js/trex.iso.js HTTP/1.1" 200 12417 [08/Jul/2013:07:54:35 +0300] "GET /trex/js/trex.amex.js HTTP/1.1" 200 6683 [08/Jul/2013:07:54:35 +0300] "GET /trex/js/trex.fps-saf.js HTTP/1.1" 200 2925 [08/Jul/2013:07:54:35 +0300] "GET /trex/js/trex.fps-iso.js HTTP/1.1" 304 Chrome request headers are as below: THis file is ok, latest: Request URL:http://localhost/trex/js/trex.iso.js Request Method:GET Status Code:200 OK (from cache) THis file is ok, latest: Request URL:http://localhost/trex/js/trex.amex.js Request Method:GET Status Code:200 OK (from cache) This one is also ok: Request URL:http://localhost/trex/js/trex.fps-iso.js Request Method:GET Status Code:200 OK (from cache) The rest of the scrips all have 200 OK (from cache).

  Read the article

• Using 3G/UMTS in Mauritius

  After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

  Read the article

• Stay on Schedule in Chrome with DayHiker

  - by Matthew Guay

  Do you keep your schedule and tasks in Google Calendar?  Here’s a handy extension for Google Chrome that can keep you on top of your appointments without having to open Google Calendar in another tab. Integrate Google Calendar with Chrome DayHiker is a handy extension for Google Chrome that can help you stay on schedule in your browser.  Desktop applications typically can keep you notified easier with popups or alerts, but webapps require you to visit them to view your information.  DayHiker takes the best of both, and can make your Google Calendar work more like a desktop application. To get started, open the DayHiker page from the Chrome Extensions Gallery (link below), and click Install.  Confirm you wish to install it at the prompt. Now you’ll have a new extension button in your Chrome toolbar.  Click the calendar icon to view your Google Calendar.  You’ll need to be signed into your Google account for your calendar to display; click the key icon to select your account if it doesn’t show your appointments automatically. If you’re signed into multiple Google accounts, such as your public Gmail and a Google Apps account, you can select the calendar you wish and click Continue. Now you can quickly see your upcoming appointments.  Simply hover over the icon to see your upcoming events.  Or, just glance at it to see if there are any appointments coming up, as the indicator icon will change colors to show how long you have until your next appointment. Click the icon to see more information about your appointments. Or, click the Add link to add a new appointment.  If you need to edit the appointment details, click Edit Details and the appointment will open in Google Calendar for you to edit. You can also view and manage your tasks in Google Calendar.  Click the checkmark icon, and then add or check-off tasks directly from the extension pane. You can also set an alarm clock in DayHiker.  Click the green circle icon, and then enter the time for the alarm to go off.  Strangely it will only chime if the extension pane is left open, so if you click anywhere else in the browser or even switch to another program it will not chime.   If you’d like to customize DayHiker’s settings, right-click on it and select Options, or select Options in the Chrome Extensions page.  Here you can customize your badges and the DayHiker icon, or enter a custom domain for your Google Apps Pro calendar.   Conclusion If you rely on Google Calendar to stay on top of your schedule, DayHiker can help you stay scheduled and know what’s coming up.  We wish DayHiker supported multiple calendars so we could combine our Google Apps calendars with our personal Google Calendar, but even still, it is a very useful tool.  Whether you’re a tightly scheduled person or just like to jot down to-dos and keep track of them, this extension will help you do this efficiently with familiar Google tools. Link Download DayHiker from the Chrome Extensions Gallery Similar Articles Productive Geek Tips Configure Disk Defragmenter Schedule in Windows 7 or VistaSchedule Updates for Windows Media CenterOpen Multiple Sites Without Reopening the Menus in FirefoxFind a Website’s Actual Location with Chrome FlagsSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• Lies, damned lies, and statistics Part 2

  - by Maria Colgan

  There was huge interest in our OOW session last year on Managing Optimizer Statistics. It seems statistics and the maintenance of them continues to baffle people. In order to help dispel the mysteries surround statistics management we have created a two part white paper series on Optimizer statistics.  Part one of this series was released in November last years and describes in detail, with worked examples, the different concepts of Optimizer statistics. Today we have published part two of the series, which focuses on the best practices for gathering statistics, and examines specific use cases including, the fears that surround histograms and statistics management of volatile tables like Global Temporary Tables. Here is a quick look at the Introduction and the start of the paper. You can find the full paper here. Happy Reading! Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif";} Introduction The Oracle Optimizer examines all of the possible plans for a SQL statement and picks the one with the lowest cost, where cost represents the estimated resource usage for a given plan. In order for the Optimizer to accurately determine the cost for an execution plan it must have information about all of the objects (table and indexes) accessed in the SQL statement as well as information about the system on which the SQL statement will be run. This necessary information is commonly referred to as Optimizer statistics. Understanding and managing Optimizer statistics is key to optimal SQL execution. Knowing when and how to gather statistics in a timely manner is critical to maintaining acceptable performance. This whitepaper is the second of a two part series on Optimizer statistics. The first part of this series, Understanding Optimizer Statistics, focuses on the concepts of statistics and will be referenced several times in this paper as a source of additional information. This paper will discuss in detail, when and how to gather statistics for the most common scenarios seen in an Oracle Database. The topics are · How to gather statistics · When to gather statistics · Improving the efficiency of gathering statistics · When not to gather statistics · Gathering other types of statistics How to gather statistics The preferred method for gathering statistics in Oracle is to use the supplied automatic statistics-gathering job. Automatic statistics gathering job The job collects statistics for all database objects, which are missing statistics or have stale statistics by running an Oracle AutoTask task during a predefined maintenance window. Oracle internally prioritizes the database objects that require statistics, so that those objects, which most need updated statistics, are processed first. The automatic statistics-gathering job uses the DBMS_STATS.GATHER_DATABASE_STATS_JOB_PROC procedure, which uses the same default parameter values as the other DBMS_STATS.GATHER_*_STATS procedures. The defaults are sufficient in most cases. However, it is occasionally necessary to change the default value of one of the statistics gathering parameters, which can be accomplished by using the DBMS_STATS.SET_*_PREF procedures. Parameter values should be changed at the smallest scope possible, ideally on a per-object bases. You can find the full paper here. Happy Reading! +Maria Colgan

  Read the article

• How to check if a cdrom is in the tray remotely (via ssh)?

  - by adempewolff

  I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

  Read the article

• SharePoint 2010 Hosting :: Setting Default Column Values on a Folder Programmatically

  - by mbridge

  The reason I write this post today is because my initial searches on the Internet provided me with nothing on the topic.  I was hoping to find a reference to the SDK but I didn’t have any luck.  What I want to do is set a default column value on an existing folder so that new items in that folder automatically inherit that value.  It’s actually pretty easy to do once you know what the class is called in the API.  I did some digging and discovered that class is MetadataDefaults. It can be found in Microsoft.Office.DocumentManagement.dll.  Note: if you can’t find it in the GAC, this DLL is in the 14/CONFIG/BIN folder and not the 14/ISAPI folder.  Add a reference to this DLL in your project.  In my case, I am building a console application, but you might put this in an event receiver or workflow. In my example today, I have simple custom folder and document content types.  I have one shared site column called DocumentType.  I have a document library which each of these content types registered.  In my document library, I have a folder named Test and I want to set its default column values using code.  Here is what it looks like.  Start by getting a reference to the list in question.  This assumes you already have a SPWeb object.  In my case I have created it and it is called site. SPList customDocumentLibrary = site.Lists["CustomDocuments"]; You then pass the SPList object to the MetadataDefaults constructor. MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary); Now I just need to get my SPFolder object in question and pass it to the meethod SetFieldDefault.  This takes a SPFolder object, a string with the name of the SPField to set the default on, and finally the value of the default (in my case “Memo”). SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"]; columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo"); You can set multiple defaults here.  When you’re done, you will need to call .Update(). columnDefaults.Update(); Here is what it all looks like together. using (SPSite siteCollection = new SPSite("http://sp2010/sites/ECMSource")) {     using (SPWeb site = siteCollection.OpenWeb())     {         SPList customDocumentLibrary = site.Lists["CustomDocuments"];         MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary);          SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"];         columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo");         columnDefaults.Update();     } } You can verify that your property was set correctly on the Change Default Column Values page in your list This is something that I could see used a lot on an ItemEventReceiver attached to a folder to do metadata inheritance.  Whenever, the user changed the value of the folder’s property, you could have it update the default.  Your code might look something columnDefaults.SetFieldDefault(properties.ListItem.Folder, "MyField", properties.ListItem[" This is a great way to keep the child items updated any time the value a folder’s property changes.  I’m also wondering if this can be done via CAML.  I tried saving a site template, but after importing I got an error on the default values page.  I’ll keep looking and let you know what I find out.

  Read the article

• New Rapid Install StartCD 12.2.0.48 for EBS 12.2 Now Available

  - by Max Arderius

  A new Rapid Install startCD (Patch 18086193) for Oracle E-Business Suite Release 12.2 is now available. We recommend that all EBS customers installing or upgrading to EBS 12.2 use this latest update. The startCD updates are distributed to customers via My Oracle Support Patch which can be uncompressed on top of any previous 12.2 startCD under the main staging area. This patch replaces any previous startCDs. What's New in This Update? This new startCD version 12.2.0.48 includes important fixes for multi-node Installs, RAC, pre-install checks, platform specific issues, and upgrade scenario failures: 18703814 - QREP:122:RI:ISSUE WITH CHECKOS.CMD 18689527 - QREP:122:RI:ISSUE WITH FNDCORE.DLL SHIPPED AS PART OF R122 PACKAGE 18548485 - QREP1224:4:JAR SIGNER ISSUE DUE TO THE RI UPGRADE AUTOCONFIG CHANGES 18535812 - QREP:1220.48_4: 12.2.0 UPGRADE FILE SYSTEM LAY OUT IS AFFECTING THE DB TABLES 18507545 - WIN: UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING RUNNING DB 18476041 - UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING PRODUCTION DB 18459887 - R12.2 INSTALLATION FAILURE - OPMNCTL: NOT FOUND 18436053 - START CD 48_4 - ISSUES WITH TEMP SPACE CHECK 18424747 - QREP1224.3:ADD SERVER BROWSE BUTTON NOT WORKING 18421132 - *RW-50010: ERROR: - SCRIPT HAS RETURNED AN ERROR: 1 18403700 - QREP122.48:RI:UPGRADE RI PRECHECK HUNG IN SPLIT TIER APPS NODE ( NO SILENT ) 18383075 - ADD VERBOSE OPTION TO RAC VALIDATION 18363584 - UPTAKE INSTALL SCRIPTS FOR XB48_4 18336093 - QREP:122:RI:PATCH FS ADMIN SERVICE RUNNING AFTER RI UPGRADE CONFIGURE MODE 18320278 - QREP:1224.3:PLATFORM SPECIFIC SYNTAX ERRORS WITH DATE COMMAND IN DB CHECKER 18314643 - DISABLE SID=DB_NAME FOR RI UPGRADE FLOW IN RAC 18298977 - RI: EXCEPTION WHILE CLICKING RAC NODES BUTTON ON A NON-RAC SERVER 18286816 - QREP122:STARTCD48_3:TRAVERSING FROM VISION PASSW SCREEN TO PROD 18286371 - QREP122:STARTCD48_3:AMBIGUOUS MESSAGE DURING STAGE AREA CHECK ON HP 18275403 - QREP122:48:RI UPGRADE WITH EOH POST CHECKS HANGS IN SPLIT TIER DB NODE 18270631 - QREP122.48:MULTI-NODE RI USING NON-DEFAULT PASSWORDS NOT WORKING 18266046 - QREP122:48:RI NOT ALLOWING TO IGNORE THE RAC PRE-CHECK FAILURE 18242201 - UPTAKE TXK INSTALL SCRIPTS AND PLATFORMS.ZIP INTO STARTCD XB48_3 18236428 - QREP122.47:RI UPGRADE EXISTING OH FOR NON-DEFAULT APPS PASSWORD NOT WORKING 18220640 - INCONSISTENT DATABASE PORTS DURING EBS 12.2 INSTALLATION FOR STARTCD 12.2.0.47 18138796 - QREP122:47:RI 10.1.2 TECHSTACK NOT WORKING IF WE RUN RI FROM NEW STARTCD LOC 18138396 - TST1220: CONTROL FILE NAMING IN RAPID INSTALL SEEMS TO HAVE ISSUES 18124144 - IMPROVE HANDLING ERRORS FOUND IN CLUVFY LOG DURING PREINSTALL CHECKS 18111361 - VALIDATE ASM DB DATA FILES PATH AS +<DATA GROUP>/<PATH> 18102504 - QREP1220.47_5: UNZIP PANEL DOES NOT CREATE THE CORRECT STAGE 18083342 - 12.2 UPGRADE JAVA.NET.BINDEXCEPTION: CANNOT ASSIGN REQUESTED ADDRESS 18082140 - QREP122:47:RAC DB VALIDATION IS FAILS WITH EXIT STATUS IS 6 18062350 - 12.2.3 UPG: 12.2.0 INSTALLATION LOGS 18050840 - RI: UPGRADE WITH EXISTING RAC OH:SECONDARY DB NODE NAME IS BLANK 18049813 - RAC LOV DEFAULTS NOT SAVED UNLESS "SELECT" IS CLICKED 18003592 - TST1220:ADDITIONAL FREE SPACE CHECK FOR RI NEEDS TO BE CHECKED 17981471 - REMOVE ASM SPACE CHECK FROM RACVALIDATIONS.SH 17942179 - R12.2 INSTALL FAILING AT ADRUN11G.SH WITH ERRORS RW-50004 & RW-50010 17893583 - QREP1220.47:VALIDATION OF O.S IN RAPIDWIZ IN THE DB NODE CONFIGURATION SCREEN 17886258 - CLEANUP FND_NODES DURING UPGRADE FLOW 17858010 - RI POST INSTALL CHECKS (SSH VERIFICATION) STEP IS FAILING 17799807 - GEOHR: 12.2.0 - ERRORS IN RAPIDWIZ AND ADCONFIG LOGS 17786162 - QREP1223.4:RI:SERVICE_NAMES IS PRINTED AS SERVICE_NAME IN RI SCREEN 17782455 - RI: CONFIRM DEFAULT APPS PASSWORD IN SILENT MODE KICKOFF 17778130 - RI:ADMIN SERVER TO BE UP ON PRIMARY MID-TIER IN MULTI-NODE UPGRADE FS CREATION 17773989 - UN-SUPPORTED PLATFORM SHOWS 32 BIT AS HARD-CODED 17772655 - RELEVANT MESSAGE DURING THE RAPDIWIZ -TECHSTACK 17759279 - VERIFICATION PANEL DOES NOT EXPAND TECHNOLOGY STACK 17759183 - BUILDSTAGE SCRIPT MENU NEEDS TO BE ADJUSTED 17737186 - DATABASE PRE-REQ CHECK INCORRECTLY REPORTS SUCCESS ON AIX 17708082 - 12.2 INSTALLATION - OS PRE-REQUISITES CHECK 17701676 - TST122: GENERATE WRONG S_DBSID FOR PATCH FILE SYSTEM AT PHASE PREPARE 17630972 - /TMP PRE-REQ INSTALLATION CHECK 17617245 - 12.2 VISION INSTALL FAILS ON AIX 17603342 - OMCS: DB STAGING COMPLAINS WHILE MOVING IT TO FINAL LOCATION 17591171 - OMCS: DB STAGING FAILS WITH FRESH INSTALL R12.2 17588765 - CHECKER VERSION AND PLUGIN VERSION 17561747 - BUILDSTAGE.SH FAILS WITH ERROR WHEN STAGE HOSTED ON 32BIT LINUX 17539198 - RAPID INSTALL NEEDS TO IGNORE NON-REQUIRED STAGE ELEMENTS 17272808 - APPS USERS THAT HAVE DEFAULT PASSWORD AFTER 12.2 RAPID INSTALL References 12.2 Documentation Library 1581299.1 : EBS 12.2 Product Information Center 1320300.1 : Oracle E-Business Suite Release Notes, Release 12.2 1606170.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for Release 12.2.3 1624423.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for R12.TXK.C.Delta.4 and R12.AD.C.Delta.4 1594274.1 : Oracle E-Business Suite Release 12.2: Consolidated List of Patches and Technology Bug Fixes Related Articles Oracle E-Business Suite 12.2 Now Available startCD options to install Oracle E-Business Suite Release 12.2

  Read the article

• View AccuWeather Forecasts in Google Chrome

  - by Asian Angel

  Being able to keep an eye on the weather while at work or browsing the Internet is definitely helpful. If you like detailed forecasts then join us as we take a look at the Forecastfox Weather extension for Google Chrome. Getting Started As soon as the Forecastfox Weather extension has finished installing you will automatically be presented with the “Customize Forecastfox Page”. The default setting is for New York with English measurement units. Enter your location into the blank and hit “Enter” to display the listing for your city/area. If you are presented multiple options to choose from simply click on the appropriate listing. Once you have your city/area displayed you will notice that it is possible to have access to weather forecasts for multiple locations. You can easily remove any unneeded listings with the “Remove Link”. For our example we removed the New York listing. Note: Click on desired locations and measurement units to automatically set them as defaults (no save button required). Forecastfox Weather in Action You can hover your mouse over the “Toolbar Button” to see the current weather conditions. Clicking on the “Toolbar Button” opens a popup window with the current conditions, 7 day forecast, and a static satellite image. If desired you can access additional details for the current weather conditions. Clicking on “details” opens a new tab with a nice bit of information such as UV Index, Moon Phases, Cloud Ceiling, etc. Note: AccuWeather.com webpages will have some ads displayed. Perhaps you need the Hourly Forecast… Once again a new tab will be opened with the predicted hourly weather conditions for the current day. Going back to the popup window you may also select a specific day from the 7 day forecast. You will be presented with a “Day & Night” forecast for the chosen day with links to view “Additional Details & Hourly” information. Interested in the satellite image instead? You can click on either of the available links for larger images. Once the new tab is open you can choose from a variety of different satellite images. Conclusion If you have been wanting a solid weather forecast extension for your Chrome browser then Forecastfox Weather is definitely a recommended install. Links Download the Forecastfox Weather extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Add Weather Forecasts to Google ChromeView Weather Underground Forecasts in Google ChromeView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeGoogle Image Search Quick Fix TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

  Read the article

• Script to UPDATE STATISTICS with time window

  - by Bill Graziano

  I recently spent some time troubleshooting odd query plans and came to the conclusion that we needed better statistics.  We’ve been running sp_updatestats but apparently it wasn’t sampling enough of the table to get us what we needed.  I have a pretty limited window at night where I can hammer the disks while this runs.  The script below just calls UPDATE STATITICS on all tables that “need” updating.  It defines need as any table whose statistics are older than the number of days you specify (30 by default).  It also has a throttle so it breaks out of the loop after a set amount of time (60 minutes).  That means it won’t start processing a new table after this time but it might take longer than this to finish what it’s doing.  It always processes the oldest statistics first so it will eventually get to all of them.  It defaults to sample 25% of the table.  I’m not sure that’s a good default but it works for now.  I’ve tested this in SQL Server 2005 and SQL Server 2008.  I liked the way Michelle parameterized her re-index script and I took the same approach. CREATE PROCEDURE dbo.UpdateStatistics ( @timeLimit smallint = 60 ,@debug bit = 0 ,@executeSQL bit = 1 ,@samplePercent tinyint = 25 ,@printSQL bit = 1 ,@minDays tinyint = 30 )AS/******************************************************************* Copyright Bill Graziano 2010*******************************************************************/SET NOCOUNT ON;PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Launching...'IF OBJECT_ID('tempdb..#status') IS NOT NULL DROP TABLE #status;CREATE TABLE #status( databaseID INT , databaseName NVARCHAR(128) , objectID INT , page_count INT , schemaName NVARCHAR(128) Null , objectName NVARCHAR(128) Null , lastUpdateDate DATETIME , scanDate DATETIME CONSTRAINT PK_status_tmp PRIMARY KEY CLUSTERED(databaseID, objectID));DECLARE @SQL NVARCHAR(MAX);DECLARE @dbName nvarchar(128);DECLARE @databaseID INT;DECLARE @objectID INT;DECLARE @schemaName NVARCHAR(128);DECLARE @objectName NVARCHAR(128);DECLARE @lastUpdateDate DATETIME;DECLARE @startTime DATETIME;SELECT @startTime = GETDATE();DECLARE cDB CURSORREAD_ONLYFOR select [name] from master.sys.databases where database_id > 4OPEN cDBFETCH NEXT FROM cDB INTO @dbNameWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN SELECT @SQL = ' use ' + QUOTENAME(@dbName) + ' select DB_ID() as databaseID , DB_NAME() as databaseName ,t.object_id ,sum(used_page_count) as page_count ,s.[name] as schemaName ,t.[name] AS objectName , COALESCE(d.stats_date, ''1900-01-01'') , GETDATE() as scanDate from sys.dm_db_partition_stats ps join sys.tables t on t.object_id = ps.object_id join sys.schemas s on s.schema_id = t.schema_id join ( SELECT object_id, MIN(stats_date) as stats_date FROM ( select object_id, stats_date(object_id, stats_id) as stats_date from sys.stats) as d GROUP BY object_id ) as d ON d.object_id = t.object_id where ps.row_count > 0 group by s.[name], t.[name], t.object_id, COALESCE(d.stats_date, ''1900-01-01'') ' SET ANSI_WARNINGS OFF; Insert #status EXEC ( @SQL); SET ANSI_WARNINGS ON; END FETCH NEXT FROM cDB INTO @dbNameENDCLOSE cDBDEALLOCATE cDBDECLARE cStats CURSORREAD_ONLYFOR SELECT databaseID , databaseName , objectID , schemaName , objectName , lastUpdateDate FROM #status WHERE DATEDIFF(dd, lastUpdateDate, GETDATE()) >= @minDays ORDER BY lastUpdateDate ASC, page_count desc, [objectName] ASC OPEN cStatsFETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN IF DATEDIFF(mi, @startTime, GETDATE()) > @timeLimit BEGIN PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + '*** Time Limit Reached ***'; GOTO __DONE; END SELECT @SQL = 'UPDATE STATISTICS ' + QUOTENAME(@dBName) + '.' + QUOTENAME(@schemaName) + '.' + QUOTENAME(@ObjectName) + ' WITH SAMPLE ' + CAST(@samplePercent AS NVARCHAR(100)) + ' PERCENT;'; IF @printSQL = 1 PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + @SQL + ' (Last Updated: ' + CAST(@lastUpdateDate AS VARCHAR(100)) + ')' IF @executeSQL = 1 BEGIN EXEC (@SQL); END END FETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateEND__DONE:CLOSE cStatsDEALLOCATE cStatsPRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Completed.'GO

  Read the article

• Enterprise Manager in EPM 11.1.2.x...a game of hide and seek!

  - by THE

  Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} guest article: Maurice Bauhahn: Users of Oracle Hyperion Enterprise Performance Management 11.1.2.0 and 11.1.2.1 may puzzle why the URL http://<servername>:7001/em may not conjure up Enterprise Manager Fusion Middleware Control. This powerful tool has been installed by default...but WebLogic may not have been 'Extended' to allow you to call it up (we are hopeful this ‘Extend’  step will not be needed with 11.1.2.2). The explanation is on pages 425 and following of the following document: http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-1-72-427329.pdf A close look at the screen dumps in that section reveals a somewhat scary prospect, however: the non-AdminServer servlets had all failed (see the red down-arrow icons to the right of their names) after the configuration! Of course you would want to avoid that scenario! A rephrasing of the instructions might help: Ensure the WebLogic AdminServer is not running (in a default scenario that would mean port 7001 is not active). Ensure you have logged into the computer as the installing owner of EPM. Since Enterprise Manager uses a LOT of resources, be sure that there is adequate free RAM to accommodate the added load. On the machine where WebLogic AdminServer is set up (typically the Foundation Services machine), run \Oracle\Middleware\wlserver_10.3\common\bin\config (config.sh on Unix). Select the 'Extend an existing WebLogic domain' option, and click the 'Next' button. Select the domain being used by EPM System. - Typically, the default domain is created under /Oracle/Middleware/user_projects/domains and is named EPMSystem. - Click 'Next'. Under 'Extend my domain automatically to support the following added products' - place a check mark before 'Oracle Enterprise Manager - 11.1.1.0 [oracle_common]' to select it. - Continue accepting the defaults by clicking 'Next' on each page until - on the last page you click 'Extend'. - The system will grind for a few minutes while it configures (deploys?) EM. - Start the AdminServer. Sometimes there is contention in the startup order of the various servlets (resulting in some not coming up). To avoid that problem on Microsoft Windows machines you may start and stop services via the following analogous command line commands to those run on Linux/Unix (these more carefully space out timings of these events): Ensure EPM is up:\Oracle\Middleware\user_projects\epmsystem1\bin\start.bat Ensure WebLogic is up:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\startWebLogic.cmd Shut down WebLogic:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\stopWebLogic.cmd Shut down EPM:\Oracle\Middleware\user_projects\epmsystem1\bin\stop.bat  Now you should be able to more successfully troubleshoot with the EM tool:

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >