Search Results

Search found 18547 results on 742 pages for 'dual screen'.

Page 48/742 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• screen flickering

  - by lilicus

  When using some applications (LibreOffice, Chrome) it happens that screen flicker (just for a second, or even less than a second) or screen turns into black and then back to normal again... it all happens very fast (usually when clicking with the mouse)... for example, I was searching something in google chrome and list of possible results appeared - when I double click on the search text area (not list of possible results) screen flicker... or when changing border lines in LibreOffice Calc... I managed to create screen shot while using LibreOffice Calc. I am using Nvidia 313 drivers-updates on Ubuntu 13.04. What could be the problem?

  Read the article

• Problem with dual monitor

  - by Gernot

  I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• JavaFX: Use a Screen with your Scene!

  - by user12610255

  Here's a handy tip for sizing your application. You can use the javafx.stage.Screen class to obtain the width and height of the user's screen, and then use those same dimensions when sizing your scene. The following code modifies default "Hello World" application that appears when you create a new JavaFX project in NetBeans. package screendemo; import javafx.application.Application; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.scene.Group; import javafx.scene.Scene; import javafx.scene.control.Button; import javafx.stage.Stage; import javafx.stage.Screen; import javafx.geometry.Rectangle2D; public class ScreenDemo extends Application { public static void main(String[] args) { Application.launch(args); } @Override public void start(Stage primaryStage) { primaryStage.setTitle("Hello World"); Group root = new Group(); Rectangle2D screenBounds = Screen.getPrimary().getVisualBounds(); Scene scene = new Scene(root, screenBounds.getWidth(), screenBounds.getHeight()); Button btn = new Button(); btn.setLayoutX(100); btn.setLayoutY(80); btn.setText("Hello World"); btn.setOnAction(new EventHandler() { public void handle(ActionEvent event) { System.out.println("Hello World"); } }); root.getChildren().add(btn); primaryStage.setScene(scene); primaryStage.show(); } } Running this program will set the Stage boundaries to visible bounds of the main screen. -- Scott Hommel

  Read the article

• Kindle Screen as Informational Display (weather, unread emails, calendar)

  - by coder543

  I'm looking to create a type of homepage for my kindle like you might expect to see upon waking up (though realistically, I plan on using it as a secondary screen throughout the day) whereupon it shows you several things dividing the screen, but not being scrollable. I just want the summary to fill the screen of the web browser. It would show the weather my gmail inbox my calendar for the day maybe some tech news However, as a starting question, how would I go about embedding my gmail inbox into the page? I would love to put m.gmail.com into an iframe restricted to a certain portion of the screen, but I know that won't likely be happening. Any ideas on how to embed an email summary or the calendar? (both served by Google) I've got the weather part working via AccuWeather's embed-able widget. I was inspired by this: http://lifehacker.com/5943867/hack-a-kindle-into-a-weather-display

  Read the article

• Screen gets garbled on some web sites

  - by user10565

  I have a Gateway notebook with graphics card 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] with open source driver Linux version 2.6.32 -28 - generic. No other operating system on the computer. When I am using firefox to browse the web, everything normally works just fine except that when I attempt to access some particular web pages the screen completely messes up going mostly white with various streaks, etc., although I can access other pages of the same site without problems. When I run the cursor over the garbled screen, bits of the image recompose themselves, at least partially, and I can continue to open the applications window, or turn the computer off, or open the terminal, or take screen shots, etc., although all menus are unreadable. Also, when I zoom in on Google Earth the screen completely messes up. At all other times, there are no apparent problems. Any ideas?

  Read the article

• Can the "screenshot" functionality be removed from an iPhone app?

  - by Charles S.

  I'm creating an iPhone app for a client who's not comfortable with allowing users the ability to press the menu & hold keys to take a screenshot of the app content. Is there any API to block this while the app is running?

  Read the article

• Monitor screen size and programming ease

  - by rrazd

  I recently heard that a big part in successful/quick debugging and easing the process of programming is to use a big screen. I may be purchasing a new computer in the future and this has me wondering: 1)Is the aforementioned statement actually true or is it a bit of a stretch? 2)Have you noticed that this plays a significant enough part to buy a bigger screen if the bigger screen is significantly more expensive? 3)Is it common for developers to work on 13'' laptop screen as their main (and only) workstation (this is what I currently develop on) or is this actually disadvantageous? This may be subjective but any professional opinions/experiences would be greatly appreciated!

  Read the article

• I want to dual boot Windows 8 on a Macbook Pro that doesn't already have Windows. Do I have to buy Windows twice?

  - by Cam Jackson

  My girlfriend just bought a Macbook Pro, and she wants to to dual boot OSX with Windows. Specifically, she would like to use Windows 8. What I already know is the following: Windows 8 discs are only meant for upgrading from previous versions of Windows Windows 8 discs can be used to do a clean install, but (officially) only if there's already a legit version of Windows on the hard disk I've read somewhere of a disc being used to install Windows 8 on a fresh, out-of-the-box hard drive, and it all went well until the activation phase, where it said that the disc could only be used for upgrades The logical conclusion would be that in my circumstance, the only option is to buy a full (non-upgrade) retail copy of Windows 7, install that using boot camp, then load up Windows 7, insert the Windows 8 upgrade disc and do the 7-8 upgrade. However, I've read quite a few blog posts of people installing Windows 8 using bootcamp (e.g., Ars Technica, which leads me to believe that it might be possible to do so without installing Win7 first. The problem is that I'm not sure if these people were using preview versions, which obviously won't have the license issues down the track. Can anyone provide a definitive answer as to how to put Win8 on a Mac?

  Read the article

• Dual-boot computer won't boot without external hard drive

  - by FrankP

  I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

  Read the article

• dual boot ubuntu installation mishap

  - by user590849

  I have Windows 7 pc ,where i had 2 partitions, a c drive for my system files and a d drive for my data. I decided to install ubuntu 11.10 a couple of days ago and thought of install it in a separate partition of its own. So i made a separate Linux partition of 30GB. I downloaded ubuntu on my usb stick and installed. During the installation process i was asked where to install ubuntu so i opened up a screen that was similar to this one There were six partitions present ( I had made only 3 partition via windows). Their names were totally different from the ones that i had given in windows. So i selected a drive which had the same size as my Linux partition that i had made in windows ( no other partition had the same size). I clicked on install now and got an error message saying that "There was no root folder set". I set the newly made partition as my root folder and clicked install now. Now out of the 6 partitions that were created 3 were logical ( i had only created 3 partitions in windows). As soon as i clicked install now, the system asked me where i wanted to put my "swap space". I selected one of the logical drives and hit install. Ubuntu successfully installed on my system and at the end it asked me to reboot. I did and got the following error message: "missing operating system". I was shocked. I tried my windows recovery disk ( that i had gotten when i had purchased my laptop) and there i went into startup repair. In the startup repair option i was not able to locate windows. The system asked me to click the "Load drivers" button to load the drivers to my harddrive where windows was installed, but i could not locate any drivers to my harddrive. I tried this several times but to no success. I panicked and installed ubuntu, now this time click "ok" at every step( not worrying about the partition and all). The os installed correctly and i am now able to access my harddrive. NO data within the c drive is lost. All the windows system files are intact. I wish to recover my windows installation. How do i go about it? Thank you in advance. I do not want to format my computer and install windows again.

  Read the article

• Dual mode 802.11n PCI adapters

  - by Mike Thompson

  I have recently bought a DLink DIR-825 router. It is a dual mode (2.4GZ & 5GHZ) 802.11n wireless access point/router. What is a good PCI adapter to pair with it? DLink appear to only make one dual mode adapter, which is the DWA-160 USB adapter. They don't seem to have a PCI adapter in their range, which seems very strange. Do any of the other network manufacturers make a good dual mode adapter?

  Read the article

• After logging out of SSH, screen sessions disappear on Arch Linux

  - by Ivan

  On Arch Linux (I'm on a single dedicated server, where my domain name points to only one IP), when I SSH into a user (say, for example, user mc), and then do screen -S test (or -dmS, the resulting issue is the same), run a command, and then detach from it, then exit out of my SSH session, and log back in, the screen session disappears. screen -ls returns No Sockets found in /run/screens/S-mc. The only way I can reattach to my sessions is if I never logged out of my SSH. How do I fix this? I do have read/write access in /run/screens/S-mc I detach from screen sessions with Ctrl-A,D disown -a && exit gives me the same problem shopt huponexit returns "huponexit off" There is no ~/.logout, and ~/.bash_logout is empty, with 3 lines of comments, telling me it's the ~/.bash_logout file ls -l /usr/bin | grep screen returns lrwxrwxrwx 1 root root 12 Oct 31 2012 screen -> screen-4.0.3 -rwsr-xr-x 1 root root 363672 Oct 31 2012 screen-4.0.3

  Read the article

• Xinerama creates a panning viewport

  - by iblue

  EDIT: I've created a bug report: https://bugs.freedesktop.org/show_bug.cgi?id=48458 My Setup I have 4 monitors, 1920x1080, which are in portrait mode (rotated left). They are connected to two radeon graphic cards. As usual, a picture says more than a thousand words. The problem Everything works fine, when Xinerama is disabled. But when I enable Xinerama, things get weird. When I move the mouse of the screen and return, the screen contents begin to move with the mouse, only on this monitor. It seems like the virtual display size does not match the real screen size, which activates a panning viewport. Any idea how to stop this? The video I created a video to demonstrate the issue: http://www.youtube.com/watch?v=zq_XHji1P24 xorg.conf This is my xorg.conf: Section "ServerLayout" ##################[ Evilness begins here ]############# Option "Xinerama" "on" # <--- Makes it go b0rked! ##################[ End of all evil ]############# Identifier "BOFH Console of Doom" Screen 0 "Screen-0" 0 0 Screen 1 "Screen-1" RightOf "Screen-0" Screen 2 "Screen-2" RightOf "Screen-1" Screen 3 "Screen-3" RightOf "Screen-2" EndSection Section "ServerFlags" Option "RandR" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "dri2" Load "record" Load "glx" EndSection Section "Monitor" Identifier "Monitor-0" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-1" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-2" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-3" Option "Rotate" "left" EndSection Section "Device" Identifier "Radeon-0-0" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-0" Screen 0 EndSection Section "Device" Identifier "Radeon-0-1" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-1" Screen 1 EndSection Section "Device" Identifier "Radeon-1-0" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-2" Screen 0 EndSection Section "Device" Identifier "Radeon-1-1" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-3" Screen 1 EndSection Section "Screen" Identifier "Screen-0" Device "Radeon-0-0" Monitor "Monitor-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-1" Device "Radeon-0-1" Monitor "Monitor-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-2" Device "Radeon-1-0" Monitor "Monitor-2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-3" Device "Radeon-1-1" Monitor "Monitor-3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• monitor power and lock screen (Ubuntu Lucid)

  - by xsznix

  Hi, I'm trying to get my screen to turn off whenever I lock my screen. I know that in Power Management, there's an option to turn off the screen after a set amount of time, and I know about xset dpms force off, but the former doesn't allow me to turn off the screen from the logout menu, and the latter only turns the screen off for a short amount of time (1 minute or so. The screen just turns back on by itself). Is there a script I can modify to change what happens when "Lock screen" from the logout menu is selected, or is there a script I can add to the panel to lock the screen and then turn the monitor off (and turning it back on when I shake the mouse or something)? Thanks.

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• How to navigate back to the previous screen in Blackberry?

  - by Rajapandian

  Hi, In Blackberry i can navigate from one screen to the next screen,but i can't navigate back to the previous screen,while pressing the escape key in the emulator terminates the entire application.Is there any other key in the emulator to go to the previous screen or any code to navigate back,if you know please help me.

  Read the article

• How do I install Ubuntu on a Sony Vaio SVT1311?

  - by Sonny

  I am wondering if I could get assistance of how to install Ubuntu on my Sony Vaio T. SVT131A11L is the hardware configuration code and the model number of the computer is one among the SVT1311 series. I contacted Sony customer service but their answer was to contact a Linux representative. The bugging error with Vaio devices is they are build to run windows and it doesnt come configured with a dual boot option, I am wondering if I could get any assistance of how to solve it, or where I could get related information.

  Read the article

• chrome os in triple boot with ubuntu (elemntary os)(ubuntu gnome) and windows 8.1

  - by Aniel Arias

  hi im wondering how to put/ install chrome os n hard drive with dual boot with Ubuntu and windows 8.1 please i need help with this. i had follow some guides from here https://sites.google.com/site/installationubuntu/chrome-os/make-your-own-chromium-os-notebook and http://unix.stackexchange.com/questions/29283/install-chromium-os-without-usb-disk please contact me at Facebook aniel arias or my email [email protected] thank you

  Read the article

• Systems Not Booting after Ubuntu installation

  - by moros

  I recently installed Ubuntu on my PC dual-booted with Windows 7. After rebooting it went through the usual startup screens, but the OS selection screen never shows up. I cannot get either system to boot. I have formatted the partition holding the Ubuntu to no avail and I really don't want to get rid of Windows. I am currently stuck using the Live session disk to boot. Any help is greatly appreciated.

  Read the article

• Unable to boot post upgade to 12.10 from 12.04 on a dial boot PC

  - by Prateek

  I have a dual boot PC with Win7 and Ubuntu. Last night I upgraded from 12.04 to 12.10 and since then I have not been able to boot and PC goes into grub rescue with error "File not found" I have tried the below steps set prefix=(hd0,msdos5)/boot/grub/i386-pc/ set root=(hd0,msdos5) insmod normal ( i get error symbol not found : 'grub_disk_dev_list'. when I try linux /boot/vmlinuz-3.2.0-32-generic root=/dev/sda5 ro (i get error - command not found 'linux' ) same for initrd I am not able to find out what sdXX to set also.

  Read the article

• Windows is not available in GRUB's boot menu, but Windows Recovery is available

  - by rafalcieslak

  I had Windows Vista installed on a laptop. I have installed separately Ubuntu, wanting to have a dual-boot system. Now, Ubuntu works OK, but I am unable to boot into Windows. GRUB menu provides me with two entries: "Windows Vista (loader)" and "Windows Recovery Environment (loader)". However, BOTH boot into recovery environment. Running sudo update-grub does not change anything. I use an up-to-date 10.10.

  Read the article

• How to display Ubuntu in the Windows Boot Menu?

  - by Jesse Ramos

  I have Windows 7 and Ubuntu 13.10 dual-boot. I have been trying to figure out a way to make Windows boot menu the only boot menu that comes up. I used EasyBCD to add an option to boot into Ubuntu from the Windows boot menu, but I would like to make it so that the GRUB screen doesn't show up when I select the Ubuntu option. I couldn't get it to work using GRUB Customizer. Anything I can try using those two programs or anything else?

  Read the article

• What location to put bootloader, when running multiple drives and partition

  - by Matt G

  I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >