Search Results

Search found 7731 results on 310 pages for 'exit failure'.

Page 48/310 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Using HTTP status codes to reflect success/failure of Web service request?

    - by jgarbers
    I'm implementing a Web service that returns a JSON-encoded payload. If the service call fails -- say, due to invalid parameters -- a JSON-encoded error is returned. I'm unsure, however, what HTTP status code should be returned in that situation. On one hand, it seems like HTTP status codes are for HTTP: even though an application error is being returned, the HTTP transfer itself was successful, suggesting a 200 OK response. On the other hand, a RESTful approach would seem to suggest that if the caller is attempting to post to a resource, and the JSON parameters of the request are invalid somehow, that a 400 Bad Request is appropriate. I'm using Prototype on the client side, which has a nice mechanism for automatically dispatching to different callbacks based on HTTP status code (onSuccess and onFailure), so I'm tempted to use status codes to indicate service success or failure, but I'd be interested to hear if anyone has opinions or experience with common practice in this matter. Thanks!

    Read the article

  • Red Hat cluster: Failure of one of two services sharing the same virtual IP tears down IP

    - by js.
    I'm creating a 2+1 failover cluster under Red Hat 5.5 with 4 services of which 2 have to run on the same node, sharing the same virtual IP address. One of the services on each node needs a (SAN) disk, the other doesn't. I'm using HA-LVM. When I shut down (via ifdown) the two interfaces connected to the SAN to simulate SAN failure, the service needing the disk is disabled, the other keeps running, as expected. Surprisingly (and unfortunately), the virtual IP address shared by the two services on the same machine is also removed, rendering the still-running service useless. How can I configure the cluster to keep the IP address up?

    Read the article

  • How to resolve error "Run-Time Check Failure #3"?

    - by karikari
    I am working on MS Visual Studio. I keep on getting this error: "Run-Time Check Failure #3 - The variable 'test' is being used without being initialized." I don't have any idea how to solve this. Here is the code that I'm currently tries to modify: STDMETHODIMP CButtonDemoBHO::Exec(const GUID*, DWORD nCmdID, DWORD d, VARIANTARG*, VARIANTARG* pvaOut) { CRebarHandler *test; switch (nCmdID){ case BUTTON_PRESSED: MessageBox(m_hWnd, L"You have pressed the button", L"Button Pressed", MB_OK); test->findButton(m_hWnd); test->setmenu(); break; case MENU_ITEM_SELECT: MessageBox(m_hWnd, L"You have simulated a button press with the menu ", L"Menu Pressed", MB_OK); break; } return S_OK; }

    Read the article

  • vc++ - static member is showing error

    - by prabhakaran
    I am using vc++(2010). I am trying to create a class for server side socket. Here is the header file #include<winsock.h> #include<string> #include<iostream> using namespace std; class AcceptSocket { // static SOCKET s; protected: SOCKET acceptSocket; public: AcceptSocket(){}; void setSocket(SOCKET socket); static void EstablishConnection(int portNo,string&); static void closeConnection(); static void StartAccepting(); virtual void threadDeal(); static DWORD WINAPI MyThreadFunction(LPVOID lpParam); }; SOCKET AcceptSocket::s; and the corresponding source file #include<NetWorking.h> #include<string> void AcceptSocket::setSocket(SOCKET s) { acceptSocket=s; } void AcceptSocket::EstablishConnection(int portno,string &failure) { WSAData w; int error = WSAStartup(0x0202,&w); if(error) failure=failure+"\nWSAStartupFailure"; if(w.wVersion != 0x0202) { WSACleanup(); failure=failure+"\nVersion is different"; } SOCKADDR_IN addr; addr.sin_family=AF_INET; addr.sin_port=htons(portno); addr.sin_addr.s_addr=htonl(INADDR_ANY); AcceptSocket::s=socket(AF_INET,SOCK_STREAM,IPPROTO_TCP); if(AcceptSocket::s == INVALID_SOCKET) failure=failure+"\nsocket creating error"; if(bind(AcceptSocket::s,(LPSOCKADDR) &addr,sizeof(addr)) == SOCKET_ERROR) failure=failure+"\nbinding error"; listen(AcceptSocket::s,SOMAXCONN); } void AcceptSocket::closeConnection() { if(AcceptSocket::s) closesocket(AcceptSocket::s); WSACleanup(); } void AcceptSocket::StartAccepting() { sockaddr_in addrNew; int size=sizeof(addrNew); while(1) { SOCKET temp=accept(AcceptSocket::s,(sockaddr *)&addrNew,&size); AcceptSocket * tempAcceptSocket=new AcceptSocket(); tempAcceptSocket->setSocket(temp); DWORD threadId; HANDLE thread=CreateThread(NULL,0,MyThreadFunction,(LPVOID)tempAcceptSocket,0,&threadId); } } DWORD WINAPI AcceptSocket::MyThreadFunction(LPVOID lpParam) { AcceptSocket * acceptsocket=(AcceptSocket *) lpParam; acceptsocket->threadDeal(); return 1; } void AcceptSocket::threadDeal() { "You didn't define threadDeal in the derived class"; } Now the main.cpp is #include<Networking.h> int main() { } When I am compiling The error I got is Error 1 error LNK2005: "private: static unsigned int AcceptSocket::s" (?s@AcceptSocket@@0IA) already defined in NetWorking.obj C:\Documents and Settings\prabhakaran\Desktop\check\check\main.obj check Error 2 error LNK1169: one or more multiply defined symbols found C:\Documents and Settings\prabhakaran\Desktop\check\Debug\check.exe 1 1 check Now anybody please enlighten me about this issue

    Read the article

  • How to fix "Sub-process /usr/bin/dpkg returned an error code (1)" when installing and upgrading packages?

    - by soum
    I am getting this error whenever tring to install or update anything: "Sub-process /usr/bin/dpkg returned an error code (1)" I need help, as I cannot install or upgrade any packages on my Ubuntu 11.10 system. Here is the rest of the error: unknown argument `triggered' dpkg: error processing mtools (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for network-manager-pptp-gnome ... No apport report written because MaxReports is reached already postinst called with unknown argument `triggered' dpkg: error processing network-manager-pptp-gnome (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for network-manager-pptp ... postinst called with unknown argument `triggered' dpkg: error processing network-manager-pptp (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for network-manager-gnome ... /var/lib/dpkg/info/network-manager-gnome.postinst called with unknown argument `triggered' dpkg: error processing network-manager-gnome (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for network-manager ... No apport report written because MaxReports is reached already /var/lib/dpkg/info/network-manager.postinst called with unknown argument `triggered' dpkg: error processing network-manager (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for mscompress ... postinst called with unknown argument `triggered' dpkg: error processing mscompress (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: netbase mtr-tiny module-init-tools mountmanager mono-4.0-gac mousetweaks mozilla-plugin-vlc mtools network-manager-pptp-gnome network-manager-pptp network-manager-gnome network-manager mscompress E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • can't install anything ,getting error "Sub-process /usr/bin/dpkg returned an error code (1)"

    - by soum
    i am getting error whenever tring to install or update anything. "Sub-process /usr/bin/dpkg returned an error code (1)" please help me i am just stopped with my ubuntu 11.10. no installation or update. th unknown argument `triggered' dpkg: error processing mtools (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for network-manager-pptp-gnome ... No apport report written because MaxReports is reached already postinst called with unknown argument `triggered' dpkg: error processing network-manager-pptp-gnome (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for network-manager-pptp ... postinst called with unknown argument triggered' dpkg: error processing network-manager-pptp (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for network-manager-gnome ... /var/lib/dpkg/info/network-manager-gnome.postinst called with unknown argumenttriggered' dpkg: error processing network-manager-gnome (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for network-manager ... No apport report written because MaxReports is reached already /var/lib/dpkg/info/network-manager.postinst called with unknown argument triggered' dpkg: error processing network-manager (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Processing triggers for mscompress ... postinst called with unknown argumenttriggered' dpkg: error processing mscompress (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: netbase mtr-tiny module-init-tools mountmanager mono-4.0-gac mousetweaks mozilla-plugin-vlc mtools network-manager-pptp-gnome network-manager-pptp network-manager-gnome network-manager mscompress E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Error "exit signal Bus error (7)" How to continue after making a backtrace?

    - by Mikel
    I have a Centos Server in 1and1 with Apache, Magento, MagentoBooster and Xcache installed. The server usually (1-8 times per day) prints this error "exit signal Bus error (7)" and sometimes this causes Apache not to respond. I have made a backtrace with GDB, but I don't know how to continue. gdb /usr/sbin/httpd core.XXXX --batch --quiet -ex "thread apply all bt full" backtrace.log The backtrace: [New Thread 15312] [Thread debugging using libthread_db enabled] Core was generated by `/usr/sbin/httpd'. Program terminated with signal 7, Bus error. #0 0x00002abcf6c7324e in memcpy () from /lib64/libc.so.6 Thread 1 (Thread 0x2abcf8c72300 (LWP 15312)): #0 0x00002abcf6c7324e in memcpy () from /lib64/libc.so.6 No symbol table info available. #1 0x00002abd02e6b9c7 in ?? () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #2 0x00002abd02ed4d47 in _zval_dup () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #3 0x00002abd02ecdffb in ?? () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #4 0x00002abd02c32636 in xc_compile_file (h=0x7fffc3e7e4f0, type=2) at /opt/xcache-1.3.2-rc1/xcache.c:1060 __orig_bailout = 0x7fffc3e88f10 __bailout = {{__jmpbuf = {46991244125792, 3379122525071325456, 46991369192208, 140736480142576, 140736480142656, 46991244125792, 3379207471940512272, 3379122524988693332}, __mask_was_saved = 0, __saved_mask = {__val = {46991369228841, 46991369206800, 46991369195208, 46991382361728, 46991369196536, 46991369206984, 46991369210744, 0, 46991240130544, 140733193388033, 0, 140736480142296, 46991240361284, 46991369207528, 46991369232128, 3}}}} sandbox = {alloc = 0, filename = 0x2abd078dd0e0 "/var/www/vhosts/DOMAIN/httpdocs/var/ait_rewrite/67b58abff9e6bd7b400bb2fc1903bf2f.php", orig_included_files = {nTableSize = 256, nTableMask = 255, nNumOfElements = 191, nNextFreeElement = 0, pInternalPointer = 0x2abcf4da53d0, pListHead = 0x2abcf4da53d0, pListTail = 0x2abd07dfeb28, arBuckets = 0x2abd0896d690, pDestructor = 0, persistent = 0 '\000', nApplyCount = 0 '\000', bApplyProtection = 1 '\001'}, tmp_included_files = 0x2abd0069e830, orig_zend_constants = 0x2abd0d630b60, tmp_zend_constants = {nTableSize = 2048, nTableMask = 2047, nNumOfElements = 1559, nNextFreeElement = 0, pInternalPointer = 0x2abd08283760, pListHead = 0x2abd08283760, pListTail = 0x2abd08320810, arBuckets = 0x2abd08302aa0, pDestructor = 0x2abd02c34850 <xc_free_zend_constant>, persistent = 1 '\001', nApplyCount = 0 '\000', bApplyProtection = 1 '\001'}, orig_function_table = 0x2abd0d61f340, orig_class_table = 0x2abd0d61f2b0, orig_auto_globals = 0x2abd0d618910, tmp_function_table = {nTableSize = 2048, nTableMask = 2047, nNumOfElements = 1555, nNextFreeElement = 0, pInternalPointer = 0x2abd08320ce0, pListHead = 0x2abd08320ce0, pListTail = 0x2abd0933fe60, arBuckets = 0x2abd079c8500, pDestructor = 0x2abd0033e1d0 <zend_function_dtor>, persistent = 1 '\001', nApplyCount = 0 '\000', bApplyProtection = 0 '\000'}, tmp_class_table = { nTableSize = 16, nTableMask = 15, nNumOfElements = 0, nNextFreeElement = 0, pInternalPointer = 0x0, pListHead = 0x0, pListTail = 0x0, arBuckets = 0x2abd079dbf60, pDestructor = 0x2abd0033dcf0 <destroy_zend_class>, persistent = 1 '\001', nApplyCount = 0 '\000', bApplyProtection = 0 '\000'}, tmp_auto_globals = {nTableSize = 16, nTableMask = 15, nNumOfElements = 9, nNextFreeElement = 0, pInternalPointer = 0x2abd0933ffc0, pListHead = 0x2abd0933ffc0, pListTail = 0x2abd093403e0, arBuckets = 0x2abd09340470, pDestructor = 0, persistent = 1 '\001', nApplyCount = 0 '\000', bApplyProtection = 0 '\000'}, tmp_internal_constant_tail = 0x2abd08320810, tmp_internal_function_tail = 0x2abd0933fe60, tmp_internal_class_tail = 0x0, orig_user_error_handler_error_reporting = 8191} op_array = <value optimized out> xce = {type = XC_TYPE_PHP, hvalue = 2460, next = 0x2abd0d939e60, cache = 0x2abd0d90b038, size = 10, refcount = 46991369191320, hits = 4, ctime = 46991362335072, atime = 8, dtime = 46991240673248, ttl = 46991369192096, name = {lval = 46991363920096, dval = 2.3216818564143281e-310, str = { val = 0x2abd078dd0e0 "/var/www/vhosts/DOMAIN/httpdocs/var/ait_rewrite/67b58abff9e6bd7b400bb2fc1903bf2f.php", len = 107}, ht = 0x2abd078dd0e0, obj = {handle = 126734560, handlers = 0x2abd0000006b}}, data = {php = 0x7fffc3e7e440, var = 0x7fffc3e7e440}, have_references = 0 '\000'} stored_xce = 0x0 php = {sourcesize = 8947, device = 64769, inode = 9907963, mtime = 1353055102, op_array = 0x2abd00344004, constinfo_cnt = 1, constinfos = 0x0, funcinfo_cnt = 132120232, funcinfos = 0x8, classinfo_cnt = 8, classinfos = 0x0, have_early_binding = 168 '\250', autoglobal_cnt = 10941, autoglobals = 0x8} cache = 0x2abd0d90b038 catched = <value optimized out> filename = <value optimized out> opened_path_buffer = "\000\000\000\000\000\000\000\000I\032\065\000\275*\000\000\300\347i\000\275*\000\000\001\000\000\000\000\000\000\000\377\377\377\377\000\000\000\000\000\000\000\000\003\000\000\000[\337\227\337,\002pr\n\000\000\000\000\000\000\000P\323\347\303\377\177\000\000\357\367\220\b\275*\000\000\243\002M\a\275*\000\000\005", '\000' <repeats 15 times>"\357, \367\220\b\275*\000\000\244\002M\a\275*\000\000Du0\000\275*\000\000\b\000\000\000\000\000\000\000\232b=\365\000\000\000\000\002\000\000\000\377\177\000\000\005\000\000\000\275*\000\000\220\322\347\303\377\177\000\000\000\020\000\000\000\000\000\000,\324\347\303\377\177\000\000`\321\347\303^", '\000' <repeats 27 times>, "\f\000\000 \001", '\000' <repeats 11 times>"\260, \322\347\303", '\000' <repeats 12 times>, "P\323\347\303\377\177\000\000x\225\332\364\004\000\000\000\001\000\000\000\031\000\000\000\300\331\336\a\275*\000\000\300\331\336\a\275*\000\000"... old_constinfo_cnt = 1559 old_funcinfo_cnt = 1555 old_classinfo_cnt = 0 #5 0x00002abd003290bf in compile_filename () from /etc/httpd/modules/libphp5.so No symbol table info available. #6 0x00002abd00398ded in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #7 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #8 0x00002abd0033b796 in zend_call_function () from /etc/httpd/modules/libphp5.so No symbol table info available. #9 0x00002abd0035b1e1 in zend_call_method () from /etc/httpd/modules/libphp5.so No symbol table info available. #10 0x00002abd00273bf4 in zif_spl_autoload_call () from /etc/httpd/modules/libphp5.so No symbol table info available. #11 0x00002abd0033b945 in zend_call_function () from /etc/httpd/modules/libphp5.so No symbol table info available. #12 0x00002abd0033c51e in zend_lookup_class_ex () from /etc/httpd/modules/libphp5.so No symbol table info available. #13 0x00002abd0033c728 in zend_fetch_class () from /etc/httpd/modules/libphp5.so No symbol table info available. #14 0x00002abd003a61ab in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #15 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #16 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #17 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #18 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #19 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #20 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #21 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #22 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #23 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #24 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #25 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #26 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #27 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #28 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #29 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #30 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #31 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #32 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #33 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #34 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #35 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #36 0x00002abd00366b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #37 0x00002abd0036628c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #38 0x00002abd00346943 in zend_execute_scripts () from /etc/httpd/modules/libphp5.so No symbol table info available. #39 0x00002abd00306898 in php_execute_script () from /etc/httpd/modules/libphp5.so No symbol table info available. #40 0x00002abd003cb09d in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #41 0x00002abcf4cfca0a in ap_run_handler () No symbol table info available. #42 0x00002abcf4cffe98 in ap_invoke_handler () No symbol table info available. #43 0x00002abcf4d0a74a in ap_internal_redirect () No symbol table info available. #44 0x00002abcfdb45bf0 in ap_make_dirstr_parent () from /etc/httpd/modules/mod_rewrite.so No symbol table info available. #45 0x00002abcf4cfca0a in ap_run_handler () No symbol table info available. #46 0x00002abcf4cffe98 in ap_invoke_handler () No symbol table info available. #47 0x00002abcf4d0a8f8 in ap_process_request () No symbol table info available. #48 0x00002abcf4d07b30 in ?? () No symbol table info available. #49 0x00002abcf4d03c92 in ap_run_process_connection () No symbol table info available. #50 0x00002abcf4d0e7a9 in ?? () No symbol table info available. #51 0x00002abcf4d0ea3a in ?? () No symbol table info available. #52 0x00002abcf4d0f29d in ap_mpm_run () No symbol table info available. #53 0x00002abcf4ce9e48 in main () No symbol table info available. Can anyone help me? ADITIONAL INFO php -v PHP 5.2.10 (cli) (built: Nov 13 2009 11:44:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with XCache v1.3.2-rc1, Copyright (c) 2005-2011, by mOo with the ionCube PHP Loader v3.1.28, Copyright (c) 2002-2007, by ionCube Ltd. httpd -v Server version: Apache/2.2.3 Server built: May 4 2011 06:51:15 Apache modules: core prefork http_core mod_so mod_auth_basic mod_auth_digest mod_authn_file mod_authn_alias mod_authn_anon mod_authn_dbm mod_authn_default mod_authz_host mod_authz_user mod_authz_owner mod_authz_groupfile mod_authz_dbm mod_authz_default util_ldap mod_authnz_ldap mod_include mod_log_config mod_logio mod_env mod_ext_filter mod_mime_magic mod_expires mod_deflate mod_headers mod_usertrack mod_setenvif mod_mime mod_dav mod_status mod_autoindex mod_info mod_dav_fs mod_vhost_alias mod_negotiation mod_dir mod_actions mod_speling mod_userdir mod_alias mod_rewrite mod_proxy mod_proxy_balancer mod_proxy_ftp mod_proxy_http mod_proxy_connect mod_cache mod_suexec mod_disk_cache mod_file_cache mod_mem_cache mod_cgi mod_version mod_fcgid mod_perl mod_php5 mod_proxy_ajp mod_python mod_ssl Aditional modules: dbase ionCube Loader sysvsem sysvshm EDIT (November 18) I have disabled some suspicious modules and the error persist. The new backtrace: [New Thread 12403] [Thread debugging using libthread_db enabled] Core was generated by `/usr/sbin/httpd'. Program terminated with signal 7, Bus error. #0 0x00002b0c5754a24e in memcpy () from /lib64/libc.so.6 Thread 1 (Thread 0x2b0c59549300 (LWP 12403)): #0 0x00002b0c5754a24e in memcpy () from /lib64/libc.so.6 No symbol table info available. #1 0x00002b0c558519c7 in ?? () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #2 0x00002b0c558bad47 in _zval_dup () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #3 0x00002b0c558b3ffb in ?? () from /usr/lib64/php/modules//php_ioncube_loader_lin_5.2_x86_64.so No symbol table info available. #4 0x00002b0c60d650bf in compile_filename () from /etc/httpd/modules/libphp5.so No symbol table info available. #5 0x00002b0c60dd4ded in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #6 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #7 0x00002b0c60d77796 in zend_call_function () from /etc/httpd/modules/libphp5.so No symbol table info available. #8 0x00002b0c60d971e1 in zend_call_method () from /etc/httpd/modules/libphp5.so No symbol table info available. #9 0x00002b0c60cafbf4 in zif_spl_autoload_call () from /etc/httpd/modules/libphp5.so No symbol table info available. #10 0x00002b0c60d77945 in zend_call_function () from /etc/httpd/modules/libphp5.so No symbol table info available. #11 0x00002b0c60d7851e in zend_lookup_class_ex () from /etc/httpd/modules/libphp5.so No symbol table info available. #12 0x00002b0c60d78728 in zend_fetch_class () from /etc/httpd/modules/libphp5.so No symbol table info available. #13 0x00002b0c60de21ab in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #14 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #15 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #16 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #17 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #18 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #19 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #20 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #21 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #22 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #23 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #24 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #25 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #26 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #27 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #28 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #29 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #30 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #31 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #32 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #33 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #34 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #35 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #36 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #37 0x00002b0c60da2b91 in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #38 0x00002b0c60da228c in execute () from /etc/httpd/modules/libphp5.so No symbol table info available. #39 0x00002b0c60d82943 in zend_execute_scripts () from /etc/httpd/modules/libphp5.so No symbol table info available. #40 0x00002b0c60d42898 in php_execute_script () from /etc/httpd/modules/libphp5.so No symbol table info available. #41 0x00002b0c60e0709d in ?? () from /etc/httpd/modules/libphp5.so No symbol table info available. #42 0x00002b0c555d3a0a in ap_run_handler () No symbol table info available. #43 0x00002b0c555d6e98 in ap_invoke_handler () No symbol table info available. #44 0x00002b0c555e174a in ap_internal_redirect () No symbol table info available. #45 0x00002b0c5e41cbf0 in ap_make_dirstr_parent () from /etc/httpd/modules/mod_rewrite.so No symbol table info available. #46 0x00002b0c555d3a0a in ap_run_handler () No symbol table info available. #47 0x00002b0c555d6e98 in ap_invoke_handler () No symbol table info available. #48 0x00002b0c555e18f8 in ap_process_request () No symbol table info available. #49 0x00002b0c555deb30 in ?? () No symbol table info available. #50 0x00002b0c555dac92 in ap_run_process_connection () No symbol table info available. #51 0x00002b0c555e57a9 in ?? () No symbol table info available. #52 0x00002b0c555e5a3a in ?? () No symbol table info available. #53 0x00002b0c555e629d in ap_mpm_run () No symbol table info available. #54 0x00002b0c555c0e48 in main () No symbol table info available.

    Read the article

  • C sockets, chat server and client, problem echoing back.

    - by wretrOvian
    Hi This is my chat server : #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define LISTEN_Q 20 #define MSG_SIZE 1024 struct userlist { int sockfd; struct sockaddr addr; struct userlist *next; }; int main(int argc, char *argv[]) { // declare. int listFD, newFD, fdmax, i, j, bytesrecvd; char msg[MSG_SIZE], ipv4[INET_ADDRSTRLEN]; struct addrinfo hints, *srvrAI; struct sockaddr_storage newAddr; struct userlist *users, *uptr, *utemp; socklen_t newAddrLen; fd_set master_set, read_set; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // create a user list users = (struct userlist *)malloc(sizeof(struct userlist)); users->sockfd = -1; //users->addr = NULL; users->next = NULL; // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo("localhost", argv[1], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((listFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // bind socket bind(listFD, srvrAI->ai_addr, srvrAI->ai_addrlen); // listen on socket if(listen(listFD, LISTEN_Q) == -1) { perror("* ERROR | listen()\n"); exit(1); } // add listfd to master_set FD_SET(listFD, &master_set); // initialize fdmax fdmax = listFD; while(1) { // equate read_set = master_set; // run select if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()\n"); exit(1); } // query all sockets for(i = 0; i <= fdmax; i++) { if(FD_ISSET(i, &read_set)) { // found active sockfd if(i == listFD) { // new connection // accept newAddrLen = sizeof newAddr; if((newFD = accept(listFD, (struct sockaddr *)&newAddr, &newAddrLen)) == -1) { perror("* ERROR | select()\n"); exit(1); } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&newAddr)->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } fprintf(stdout, "* Client Connected | %s\n", ipv4); // add to master list FD_SET(newFD, &master_set); // create new userlist component utemp = (struct userlist*)malloc(sizeof(struct userlist)); utemp->next = NULL; utemp->sockfd = newFD; utemp->addr = *((struct sockaddr *)&newAddr); // iterate to last node for(uptr = users; uptr->next != NULL; uptr = uptr->next) { } // add uptr->next = utemp; // update fdmax if(newFD > fdmax) fdmax = newFD; } else { // existing sockfd transmitting data // read if((bytesrecvd = recv(i, msg, MSG_SIZE, 0)) == -1) { perror("* ERROR | recv()\n"); exit(1); } msg[bytesrecvd] = '\0'; // find out who sent? for(uptr = users; uptr->next != NULL; uptr = uptr->next) { if(i == uptr->sockfd) break; } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&(uptr->addr))->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } // print fprintf(stdout, "%s\n", msg); // send to all for(j = 0; j <= fdmax; j++) { if(FD_ISSET(j, &master_set)) { if(send(j, msg, strlen(msg), 0) == -1) perror("* ERROR | send()"); } } } // handle read from client } // end select result handle } // end looping fds } // end while return 0; } This is my client: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define MSG_SIZE 1024 int main(int argc, char *argv[]) { // declare. int newFD, bytesrecvd, fdmax; char msg[MSG_SIZE]; fd_set master_set, read_set; struct addrinfo hints, *srvrAI; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo(argv[1], argv[2], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((newFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // connect to server if(connect(newFD, srvrAI->ai_addr, srvrAI->ai_addrlen) == -1) { perror("* ERROR | connect()\n"); exit(1); } // add to master, and add keyboard FD_SET(newFD, &master_set); FD_SET(STDIN_FILENO, &master_set); // initialize fdmax if(newFD > STDIN_FILENO) fdmax = newFD; else fdmax = STDIN_FILENO; while(1) { // equate read_set = master_set; if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()"); exit(1); } // check server if(FD_ISSET(newFD, &read_set)) { // read data if((bytesrecvd = recv(newFD, msg, MSG_SIZE, 0)) < 0 ) { perror("* ERROR | recv()"); exit(1); } msg[bytesrecvd] = '\0'; // print fprintf(stdout, "%s\n", msg); } // check keyboard if(FD_ISSET(STDIN_FILENO, &read_set)) { // read data from stdin if((bytesrecvd = read(STDIN_FILENO, msg, MSG_SIZE)) < 0) { perror("* ERROR | read()"); exit(1); } msg[bytesrecvd] = '\0'; // send if((send(newFD, msg, bytesrecvd, 0)) == -1) { perror("* ERROR | send()"); exit(1); } } } return 0; } The problem is with the part where the server recv()s data from an FD, then tries echoing back to all [send() ]; it just dies, w/o errors, and my client is left looping :(

    Read the article

  • Trying to debug a 'Assertion failure in -[UIActionSheet showInView:]' error....

    - by dsobol
    I am working through "Beginning iPad Application Development" and am getting hung up in Chapter 3 where I have created a project that works with an Action Sheet. As it stands now, my application loads into the simulator just fine with no errors that I am aware of, but as it runs, it crashes with the following errors showing up in the debugger window: 2010-05-31 19:44:39.703 UsingViewsActionSheet[49538:207] * Assertion failure in -[UIActionSheet showInView:], /SourceCache/UIKit_Sim/UIKit-1145.66/UIAlert.m:7073 2010-05-31 19:44:39.705 UsingViewsActionSheet[49538:207] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: view != nil' I am sure that this is the block where the app breaks based upon my use of breakpoints. //Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { UIActionSheet *action = [[UIActionSheet alloc] initWithTitle:@"This is my Action Sheet!" delegate:self cancelButtonTitle:@"OK" destructiveButtonTitle:@"Delete Message!" otherButtonTitles:@"Option 1", @"Option 2", @"Option 3", nil]; [action showInView:self.view]; // <-- This line seems to trigger the crash.... [action release]; [super viewDidLoad]; } Am I missing something obvious, or is there more to the problem than is shown here? I have looked at the abstract for showInView and cannot divine anything there yet. I appreciate any and all asssitance. Regards, Steve O'Sullivan

    Read the article

  • How can I get JUnit test (driven from Ant script) to dump the stack of exception that causes failure

    - by Matt Wang
    We run JUnit test from Ant script, as follows. When the test failed, I expect it to output the stack dump of the exception that casuses the failure, but it doesn't. Is there any trick to get it dumped? <target description="Run JUnit tests" name="run-junit" depends="build-junit"> <copy file="./AegisLicense.txt" tofile="test/junit/classes/AegisLicense.txt" overwrite="true"/> <junit printsummary="yes" haltonfailure="no" fork="yes" forkmode="once" failureproperty="run-aegis-junit-failed" showoutput="yes" filtertrace="off"> <classpath refid="Aegisoft.testsupport.classpath"/> <classpath> <pathelement location="test/junit/classes"/> </classpath> <batchtest> <fileset dir="test/junit/src"> <include name="**"/> </fileset> </batchtest> </junit> <fail

    Read the article

  • How do I trace SQL Server Failure Audit events?

    - by Tim Perry
    I recently took over management of a Windows 2003 server. The application log is being filled up with messages like these: Event Type: Failure Audit Event Source: MSSQLSERVER Event Category: (4) Event ID: 18456 Date: 3/5/2010 Time: 4:00:30 PM User: N/A Computer: FAIROAKS1 Description: Login failed for user 'administrator'. [CLIENT: <local machine>] Data: 0000: 18 48 00 00 0e 00 00 00 .H...... 0008: 0a 00 00 00 46 00 41 00 ....F.A. 0010: 49 00 52 00 4f 00 41 00 I.R.O.A. 0018: 4b 00 53 00 31 00 00 00 K.S.1... 0020: 07 00 00 00 6d 00 61 00 ....m.a. 0028: 73 00 74 00 65 00 72 00 s.t.e.r. 0030: 00 00 .. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'd like to figure out what program is causing these. Is there a way to trace and find out which process is causing these errors?

    Read the article

  • BizTalk Server 2009 - Architecture Options

    - by StuartBrierley
    I recently needed to put forward a proposal for a BizTalk 2009 implementation and as a part of this needed to describe some of the basic architecture options available for consideration.  While I already had an idea of the type of environment that I would be looking to recommend, I felt that presenting a range of options while trying to explain some of the strengths and weaknesses of those options was a good place to start.  These outline architecture options should be equally valid for any version of BizTalk Server from 2004, through 2006 and R2, up to 2009.   The following diagram shows a crude representation of the common implementation options to consider when designing a BizTalk environment.         Each of these options provides differing levels of resilience in the case of failure or disaster, with the later options also providing more scope for performance tuning and scalability.   Some of the options presented above make use of clustering. Clustering may best be described as a technology that automatically allows one physical server to take over the tasks and responsibilities of another physical server that has failed. Given that all computer hardware and software will eventually fail, the goal of clustering is to ensure that mission-critical applications will have little or no downtime when such a failure occurs. Clustering can also be configured to provide load balancing, which should generally lead to performance gains and increased capacity and throughput.   (A) Single Servers   This option is the most basic BizTalk implementation that should be considered. It involves the deployment of a single BizTalk server in conjunction with a single SQL server. This configuration does not provide for any resilience in the case of the failure of either server. It is however the cheapest and easiest to implement option of those available.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (B) Single BizTalk Server with Clustered SQL Servers   This option uses a single BizTalk server with a cluster of SQL servers. By utilising clustered SQL servers we can ensure that there is some resilience to the implementation in respect of the databases that BizTalk relies on to operate. The clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition. While this option offers improved resilience over option (A) it does still present a potential single point of failure at the BizTalk server.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. You are also unable to take advantage of multiple message boxes, which would allow us to balance the SQL load in the event of any bottlenecks in this area of the implementation. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (C) Clustered BizTalk Servers with Clustered SQL Servers   This option makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in the case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    The use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning any implemented solutions. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling out the solution as future demand requires.   This might be seen as the middle cost option, providing a good level of protection in the case of failure, a decent level of future proofing, but at a higher cost than the single BizTalk server implementations.   (D) Clustered BizTalk Servers with Clustered SQL Servers – with disaster recovery/service continuity   This option is similar to that offered by (C) and makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    As with (C) the use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning the implemented solution. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling the solution out as future demand requires.   In this scenario however, we would be including some form of disaster recovery or service continuity. An example of this would be making use of multiple sites, with the BizTalk server cluster operating across sites to offer resilience in case of the loss of one or more sites. In this scenario there are options available for the SQL implementation depending on the network implementation; making use of either one cluster per site or a single SQL cluster across the network. A multi-site SQL implementation would require some form of data replication across the sites involved.   This is obviously an expensive and complex option, but does provide an extraordinary amount of protection in the case of failure.

    Read the article

  • What might cause https failure when not specifying SSL protocol?

    - by user35042
    I have a VBScript program that retrieves a web page from a server not under my control. The URL looks something like https://someserver.xxx/index.html. I use this code to create the object that does the page getting: Set objWinHttp = CreateObject("WinHttp.WinHttpRequest.5.1") When I wrote my program it had no problem retrieving this page. Recently, the web server serving this page went through an upgrade. Now my program can no longer fetch the page. Some clues: Clue 1. I can fetch the web page if I use a browser (I tried Firefox, IE, and Chrome). Clue 2. The VBScript code yields this error: The message received was unexpected or badly formatted. Clue 3. I can fetch the web page from the command line in certain cases but not in others: curl --sslv3 -v -k 'https://someserver.xxx/index.html' # WORKS! curl --sslv2 -v -k 'https://someserver.xxx/index.html' # WORKS! curl -v -k 'https://someserver.xxx/index.html' # FAILS curl --tlsv1 -v -k 'https://someserver.xxx/index.html' # FAILS In the case where I do not specify a protocol I get this error: * SSLv3, TLS handshake, Client hello (1): * error:14077417:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert illegal parameter * Closing connection #0 In the case where I specify --tlsv1 I get this error: * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS alert, Server hello (2): * error:14094417:SSL routines:SSL3_READ_BYTES:sslv3 alert illegal parameter * Closing connection #0 A. Does anyone have any suggestions or ideas on what might be going on at the web server end (I am unable to talk to the admins of the web server to find out what they changed). B. Is there a way I can change my VBScript code to work around this issue? Can the SSL version be forced?

    Read the article

  • How can I resolve Oracle 11g XE connection failure straight after installation?

    - by d3vid
    I have just installed Oracle 11g XE on a Windows 7 VirtualBox VM, using all the default options. "Getting Started" fails When I click on Getting Started I get taken to http://127.0.0.1:8080/apex/f?p=4950 which fails. After some browsing I came across a suggestion to confirm the HTTP port, but I can't get this far, because I can't connect. connect system fails If I select Run SQL command line I get taken to a SQL prompt. I enter connect system and get prompted for a password. I enter the password. I immediately get the following error: ERROR: ORA-01033: ORACLE initialization or shutdown in progress Process ID: 0 Session ID: 0 Serial number: 0 Info: Start database This happens whether or not I run Start database first. (Start database just opens a Windows command prompt window.) Info: Windows services My Oracle services start as follows: Starting the manual services doesn't resolve the problem. Enabling and starting the disabled service doesn't resolve the problem. Is there something I haven't done? How can I resolve this connection error?

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

  • Failure to install NetFX3 on Windows Server 2012: Error 3017 -- Am I missing something here?

    - by Nick
    I am really struggling to get this installed. I have tried the suggestions here in an attempt to rectify any possible corruption. I mounted the disk image to 'G' to do an offline install. I also attempted an online install with similar results. Output as follows: Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved. C:\Users\Administrator>dism /online /enable-feature /featurename:NetFX3 /All /So urce:G:\sources\sxs /LimitAccess Deployment Image Servicing and Management tool Version: 6.2.9200.16384 Image Version: 6.2.9200.16384 Enabling feature(s) [==========================100.0%==========================] Error: 3017 The requested operation failed. A system reboot is required to roll back changes made. The DISM log file can be found at C:\Windows\Logs\DISM\dism.log Log as follows (Errors/Warnings Only): 2013-04-08 23:40:17, Error DISM DISM Package Manager: PID=3756 TID=3768 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x80070bc9) 2013-04-08 23:40:17, Error DISM DISM Package Manager: PID=3756 TID=3768 Failed processing package changes with session options - CDISMPackageManager::ProcessChangesWithOptions(hr:0x80070bc9) 2013-04-08 23:40:17, Error DISM DISM Package Manager: PID=3756 TID=3768 Failed ProcessChanges. - CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x80070bc9) 2013-04-08 23:40:17, Error DISM DISM Package Manager: PID=3756 TID=3768 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070bc9) 2013-04-08 23:40:17, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070BC9 2013-04-08 23:38:10, Warning DISM DISM Provider Store: PID=3160 TID=3172 Failed to Load the provider: C:\Windows\TEMP\505F54F1-4977-4233-835C-8B6DA83BCAEB\PEProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e) 2013-04-08 23:39:23, Warning DISM DISM Provider Store: PID=3756 TID=3768 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\2\F1B7A223-F380-4F42-84BF-396D374EE80B\PEProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e) 2013-04-08 23:39:23, Warning DISM DISM Provider Store: PID=3756 TID=3768 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\2\F1B7A223-F380-4F42-84BF-396D374EE80B\IBSProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e) 2013-04-08 23:39:23, Warning DISM DISM Provider Store: PID=3756 TID=3768 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002) 2013-04-08 23:39:23, Warning DISM DISM Provider Store: PID=3756 TID=3768 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\2\F1B7A223-F380-4F42-84BF-396D374EE80B\Wow64provider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x80004002) 2013-04-08 23:39:23, Warning DISM DISM Provider Store: PID=3756 TID=3768 Failed to Load the provider: C:\Users\ADMINI~1\AppData\Local\Temp\2\F1B7A223-F380-4F42-84BF-396D374EE80B\EmbeddedProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e) None of my error codes align with any of those on this MS support page. I would really appreciate your assistance. I am really struggling with a solution. Am I missing something obvious here? EDIT: I have verified the checksum of my ISO image: File Name: en_windows_server_2012_x64_dvd_915478.iso SHA1: D09E752B1EE480BC7E93DFA7D5C3A9B8AAC477BA

    Read the article

  • How to customize Windows Failover clustering to trigger on failure of custom window service?

    - by melaos
    i'm a total newbie on windows failover clustering. and what i want to do now is to setup the FC (failover clustering) on two win 2008 R2 server. and right now i have my custom window service running on both machine. But they cannot run concurrently as it will mess up the DB, thus i just want one to be available at all time (high availability). so i'm wondering if there's any way to set the failover policy to include this custom window service that i've installed on these machines so that if this service goes down or die, then it will automatically trigger the failover to the second node. is this possible? or must it be done programatically? and if so what is the best way? thanks ~m

    Read the article

  • Mac OS X printing to CUPS - More intuitive authentication failure?

    - by Moduspwnens
    We have a network-wide CUPS server that offers authenticated printer access to all our campus users. We've been pretty disappointed with the way Mac clients handle bad printing authentication, though. In any other authentication dialog, when a user types in a bad username or password, the window shakes briefly, allowing the user to re-enter. With printers, this isn't the case. It'll happily accept (and even save to the keychain, if specified) bad credentials. The authentication dialog is dismissed, and the user then has to deal with the print jobs showing up as "On hold (authentication required)". To get their job printed, they need to select it in the printer's queue, click "Resume", then re-enter appropriate credentials. Is there a way to get failed printing authentication to work more intuitively for Mac OS X clients? We're trying to support a BYOD environment, but our end users have been really confused by this. It's made even worse by the way it pre-populates the user's full login name (e.g. "Smith, John"), which tends to make them think to use their local machine passwords.

    Read the article

  • How to add nvidia drivers after previous failure with linux mint?

    - by LessThanMe
    Before today, I had perfectly good drivers from nvidia for my linux mint (15) box. I decided to update it because my performance in TF2 is less than stellar, and then things went south. I used synaptic to install nvidia-331 and then rebooted, but when I selected Mint in GRUB I waited...and waited...and waited. Nothing happened, but the display stayed on (a completely black video was being output). So I went into recovery mode from GRUB, went to root access, and apt-get remove --purge nvidia*'d my way out of that mess, and installed nvidia-common. Now my performance in graphic intensive stuff (read: games, blender) sucks, so I've been through the same thing a few times trying to re-install nvidia-current. I just want to get it back how it was. Thanks for any help! Nvidia GTX 560

    Read the article

  • Win 7 (SP1) Creationg of System Image failure... seems absurd. (0x80780119)

    - by DSKauai16
    This question seems to keep coming up in Microsoft Answers. Unfortunately, it never seems to be solved... on Microsoft Answers. Hopefully someone here will have a better idea. I'm trying to create a system image. It's not working. I have just re-installed windows as of a few hours ago. I have an admittedly older Western Digital 148 GB USB portable HDD which is not just completely empty, but I even did a long format with the NTFS file system just to be sure. The reinstallation of windows and a couple of programs take up 40 GB (seen below) When I try to create a System Image onto the USB HDD, I am told that there is not enough room. Obviously, this is wrong. The screen captures show exactly the steps that are happening to lead me to 0x80780119. I haven't done anything but put on Windows 7 (32bit; SP1) and install some programs. I haven't even done anything with them. There's almost zero in the way of data, and I checked that yes, the HDD works to accept data, send data and work with data. I've used the drive successfully for a long, long time. What's going wrong?

    Read the article

  • Ubuntu Wubi "drive" failure; mount drive in XP?

    - by 618034
    Hi there, I installed the Wubi distribution of Ubuntu on a separate partition (which is silly, since why do I care if Windows can still manage the partition?) a few months back; it was pretty awesome, until Linux hosed. At this point, I can get Ubuntu to boot if I try really hard through grub, but once it does start, the screen is hosed, so no dice. At this point, I'd like to wipe it all and start over, but I need to get some stuff off the "disk". The Wubi install makes this difficult, since the "disk" is a flat file on an NTFS partition. I've done just about everything I can think of — I renamed the virtual disk .iso, mounted it with VirtualCloneDrive, then used whatever magic EXT3 (EXT4?) readers I could dig up on the Internet to parse the mount — but nothing's working. Can you offer any suggestions? The "disk" is currently in D:\ubuntu\disks\root.iso. Many thanks! (I may be high-latency at the moment, apologies if I don't address follow-ups quickly)

    Read the article

  • Is my hard drive about to fail?

    - by Cody Harlow
    I hear some squeaking noises sometimes when I use my computer so I ran smartctl. This is the results: === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 5953 37922655 # 2 Extended offline Completed: read failure 90% 5953 37922655 # 3 Short offline Completed: read failure 90% 5953 37922655 # 4 Short offline Completed without error 00% 429 - # 5 Extended offline Aborted by host 90% 429 - # 6 Short offline Completed without error 00% 429 - # 7 Short offline Completed without error 00% 429 - Is this a bad sign?

    Read the article

  • Snow Leopard connecting to Unbuntu 10.04 through Samba failure -- need help fixing.

    - by Chris Altman
    I have a Ubuntu 10.04 web server. I want to connect to it with my OSX 10.6 machine and Finder. I have installed openSSH and Samba on the Ubuntu machine. In my smb.conf I have a Share Definition: [www] comment = Development Computer WWW path = /var/www writeable = yes browseable = yes allow hosts = 192.168.1. I can connect to the machine through Finder using a non-root user. When I attempt to add files thought Finder I get an "Insufficient Permissions" error. Please help. I am not sure if the issue is in the Samba configuration or OSX 10.6 Thank you

    Read the article

  • How do I diagnose Windows XP failure to automatically suspend on idle?

    - by Software Monkey
    Since upgrading my hardware (mobo, CPU and memory) a couple months ago my computer no longer automatically suspends and hibernates after the configured idle periods. Both functions work just fine manually, but if I leave the computer on overnight it's still active the next morning even though it's configured to sleep after 3 hours and hibernate after 6 hours. How do I diagnose the cause of this?

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >