master james - Page 48 - Developer IT

HOw to make the user the ownder of new files

- by Master

I have VPS with CentOS 5.4. This is production server. The problem is when my webiste installs some scripts from site , then the owner name is not written on the file and as user i can even change the file permissions. Is there any way that which ever script is writing file , the owner of home directory should the owner of all the files

Read the article

HOw to make the user the owner of new files

- by Master

I have VPS with CentOS 5.4. This is production server. The problem is when my webiste installs some scripts from site , then the owner name is not written on the file and as user i can even change the file permissions. Is there any way that which ever script is writing file , the owner of home directory should the owner of all the files

Read the article

How do you save the state of a computation in while using SNOW (or Multicore or ...)

- by James

From hard experience I've found it useful to occasionally save the state of my long computations to disk to start them up later if something fails. Can I do this in a distributed computation package in R (like SNOW or multicore)? It does not seem clear how this could be done since the master is collecting things from the slaves in a non-transparent way.

Read the article

Making sense of S.M.A.R.T

- by James

First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

Read the article

git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

- by Ben

I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

Read the article

git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

- by Ben

I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

Read the article

How to block subreddits with BIND9?

- by user1391189

Please help me block NSFW subreddits like this one (http://www.reddit.com/r/NSFW/) I would like to keep access to SFW subreddits, but block certain subreddits that are distracting or NSFW. I know how to filter domains. (see files below) But how do I apply the filter only to certain subreddits? So far I have set up the following files: blocklist.conf zone "adimages.go.com" { type master; file "dummy-block"; }; zone "admonitor.net" { type master; file "dummy-block"; }; zone "ads.specificpop.com" { type master; file "dummy-block"; }; ... named.conf options { allow-query { 127.0.0.1; }; allow-recursion { 127.0.0.1; }; directory "c:\bind\etc"; notify no; }; zone "." IN { type hint; file "c:\bind\etc\named.root"; }; zone "localhost" IN { allow-update { none; }; file "c:\bind\etc\localhost.zone"; type master; }; zone "0.0.127.in-addr.arpa" IN { allow-update { none; }; file "c:\bind\etc\named.local"; type master; }; key "rndc-key" { algorithm hmac-md5; secret "O5VdbBKKEMzuLYjM60CxwuLLURFA6peDYHCBvZCqjoa6KtL1ggD7OTLeLtnu2jR5I5cwA/MQ8UdHc+9tMJRSiw=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; //Blocklist include "c:\bind\etc\blocklist.conf"; dummy-block $TTL 604800 @ IN SOA localhost. root.localhost. ( 2 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS localhost. @ IN A 127.0.0.1 * IN A 127.0.0.1

Read the article

Setting Up My Server to Do DNS On OpenSuse 11.3

- by adaykin

Hello, I am attempting to use my server to be a DNS server. I am having trouble getting the domain setup. Here is what I have so far: /var/lib/named/master/andydaykin.com: $TTL 2d @ IN SOA andydaykin.com. root.andydaykin.com. ( 2011011000 ; serial 0 ; refresh 0 ; retry 0 ; expiry 0 ) ; minimum andydaykin.com. IN NS ns1.andydaykin.com. andydaykin.com. IN SOA ns1.andydaykin.com. hostmaster.andydaykin.com. ( @.andydaykin.com. IN NS ns1.andydaykin.com. ns1.andydaykin.com. IN A 204.12.227.33 www.andydaykin.com. IN A 204.12.227.33 /etc/resolve.conf: search andydaykin.com nameserver 204.12.227.33 /etc/named.conf: options { # The directory statement defines the name server's working directory directory "/var/lib/named"; dump-file "/var/log/named_dump.db"; statistics-file "/var/log/named.stats"; listen-on port 53 { 127.0.0.1; }; listen-on-v6 { any; }; notify no; disable-empty-zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA"; include "/etc/named.d/forwarders.conf"; }; zone "." in { type hint; file "root.hint"; }; zone "localhost" in { type master; file "localhost.zone"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.zone"; }; Include the meta include file generated by createNamedConfInclude. This includes all files as configured in NAMED_CONF_INCLUDE_FILES from /etc/sysconfig/named include "/etc/named.conf.include"; zone "andydaykin.com" in { file "master/andydaykin.com"; type master; allow-transfer { any; }; }; logging { category default { log_syslog; }; channel log_syslog { syslog; }; }; What I am doing wrong?

Read the article

TXT File or Database?

- by Ruth Rettigo

Hey folks! What should I use in this case (Apache + PHP)? Database or just a TXT file? My priority #1 is speed. Operations Adding new items Reading items Max. 1 000 records Thank you. Database (MySQL) +----------+-----+ | Name | Age | +----------+-----+ | Joshua | 32 | | Thomas | 21 | | James | 34 | | Daniel | 12 | +----------+-----+ TXT file Joshua 32 Thomas 21 James 34 Daniel 12

Read the article

Row Number for group by ?

- by Damien Joe

I have table structure like Category EmpName 1 Harry 1 John 1 Ford 2 James 2 Mark 2 Shane 3 Oliver 3 Ted I want results like Category EmpName RowNumber 1 Harry 1 1 John 2 1 Ford 3 2 James 1 2 Mark 2 2 Shane 3 3 Oliver 1 3 Ted 2 I am using db2 and row_number() is not working for different groups of records.

Read the article

Storing a set of criteria in another table

- by bendataclear

I have a large table with sales data, useful data below: RowID Date Customer Salesperson Product_Type Manufacturer Quantity Value 1 01-06-2004 James Ian Taps Tap Ltd 200 £850 2 02-06-2004 Apple Fran Hats Hats Inc 30 £350 3 04-06-2004 James Lawrence Pencils ABC Ltd 2000 £980 ... Many rows later... ... 185352 03-09-2012 Apple Ian Washers Tap Ltd 600 £80 I need to calculate a large set of targets from table containing values different types, target table is under my control and so far is like: TargetID Year Month Salesperson Target_Type Quantity 1 2012 7 Ian 1 6000 2 2012 8 James 2 2000 3 2012 9 Ian 2 6500 At present I am working out target types using a view of the first table which has a lot of extra columns: SELECT YEAR(Date) , MONTH(Date) , Salesperson , Quantity , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType1 , CASE WHEN Manufacturer = 'Hats Inc' AND Product_Type IN ('Hats','Coats') THEN True ELSE False END AS IsType2 ... ... , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType24 , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType25 FROM SalesTable WHERE [some stuff here] This is horrible to read/debug and I hate it!! I've tried a few different ways of simplifying this but have been unable to get it to work. The closest I have come is to have a third table holding the definition of the types with the values for each field and the type number, this can be joined to the tables to give me the full values but I can't work out a way to cope with multiple values for each field. Finally the question: Is there a standard way this can be done or an easier/neater method other than one column for each type of target? I know this is a complex problem so if anything is unclear please let me know. Edit - What I need to get: At the very end of the process I need to have targets displayed with actual sales: Type Year Month Salesperson TargetQty ActualQty 2 2012 8 James 2000 2809 2 2012 9 Ian 6500 6251 Each row of the sales table could potentially satisfy 8 of the types. Some more points: I have 5 different columns that need to be defined against the targets (or set to NULL to include any value) I have between 30 and 40 different types that need to be defined, several of the columns could contain as many as 10 different values For point 2, if I am using a row for each permutation of values, 2 columns with 10 values each would give me 100 rows for each sales person for each month which is a lot but if this is the only way to define multiple values I will have to do this. Sorry if this makes no sense!

Read the article

preg_replace to capitalize a letter after a quote

- by Summer

I have names like this: $str = 'JAMES "JIMMY" SMITH' I run strtolower, then ucwords, which returns this: $proper_str = 'James "jimmy" Smith' I'd like to capitalize the second letter of words in which the first letter is a double quote. Here's the regexp. It appears strtoupper is not working - the regexp simply returns the unchanged original expression. $proper_str = preg_replace('/"([a-z])/',strtoupper('$1'),$proper_str); Any clues? Thanks!!

Read the article

problems with cut (unix)

- by lego69

hello everybody, I've got strange problem with cut I wrote script, there I have row: ... | cut -d" " -f3,4 >! out cut recieves this data (I checked it with echo) James James 033333333 0 0.00 but I recieve empty lines in out, can somebody explain why?

Read the article

SharePoint 2010 Hosting :: Hiding SharePoint 2010 Ribbon From Anonymous Users

- by mbridge

The user interface improvements in SharePoint 2010 as a whole are truly amazing. Microsoft has brought this already impressive product leaps and bounds in terms of accessibility, standards, and usability. One thing you might be aware of is the new and quite useful “ribbon” control that appears by default at the top of every SharePoint 2010 master page. Here’s a sneak peek: You’ll see this ribbon not only in the 2010 web interface, but also throughout the entire family of Office products coming out this year. Even SharePoint Designer 2010 makes use of the ribbon in a very flexible and useful way. Hiding The Ribbon In SharePoint 2010, the ribbon is used almost exclusively for content creation and site administration. It doesn’t make much sense to show the ribbon on a public-facing internet site (in fact, it can really retract from your site’s design when it appears), so you’ll probably want to hide the ribbon when users aren’t logged in. Here’s how it works: <SharePoint:SPSecurityTrimmedControl PermissionsString="ManagePermissions" runat="server"> <div id="s4-ribbonrow" class="s4-pr s4-ribbonrowhidetitle">  </div> </SharePoint:SPSecurityTrimmedControl> In your master page, find the SharePoint ribbon by looking for the line of code that begins with <div id=”s4-ribbonrow”>. Place the SPSecurityTrimmedControl code around your ribbon to conditionally hide it based on user permissions. In our example, we’ve hidden the ribbon from any user who doesn’t have the ManagePermissions ability, which is going to be almost any user short of a site administrator. Other Permission Levels You can specify different permission levels for the SPSecurityTrimmedControl, allowing you to configure exactly who can see the SharePoint 2010 ribbon. Basically, this control will hide anything inside of it when users don’t have the specified PermissionString. The available options include: 1. List Permissions - ManageLists - CancelCheckout - AddListItems - EditListItems - DeleteListItems - ViewListItems - ApproveItems - OpenItems - ViewVersionsDeleteVersions - CreateAlerts - ViewFormPages 2. Site Permissions - ManagePermissions - ViewUsageData - ManageSubwebs - ManageWeb - AddAndCustomizePages - ApplyThemeAndBorder - ApplyStyleSheets - CreateGroups - BrowseDirectories - CreateSSCSite - ViewPages - EnumeratePermissions - BrowseUserInfo - ManageAlerts - UseRemoteAPIs - UseClientIntegration - Open - EditMyUserInfo 3. Personal Permissions - ManagePersonalViews - AddDelPrivateWebParts - UpdatePersonalWebParts You can use this control to hide anything in your master page or on related page layouts, so be sure to keep it in mind when you’re trying to hide/show things conditionally based on user permission. The One Catch You may notice that the login control (or welcome control) is actually inside the ribbon by default in SharePoint 2010. You’ll probably want to pull this control out of the ribbon and place it elsewhere on your page. Just look for the line of code that looks like this: <wssuc:Welcome id="IdWelcome" runat="server" EnableViewState=”false”/> Move this code out of the ribbon and into another location within your master page. Save your changes, check in and approve all files, and anonymous users will never know your site is built on SharePoint 2010!

Read the article

My “SQL Server” Goals for 2011

- by NeilHambly

Having Read a few blogs on various SQL people setting their "Goals" for the Year ahead, and having some clearly defined SQL based goals already in mind. I have decided to share these for others to see and ask me from time-time how I'm progressing with them, so although no particular priorities in mind here are my chosen goals for 2011 SQL conferences & Training Events · SQLCruise (June 2011) Alaska - I'm booked on this one already!! · SQL Master Week # 1 ( April/May 2011) Master...(read more)

Read the article

Is an undergraduate degree in CS required?

- by Girish

I will complete my undergrad in Material Science this spring. I am not interested in the subject but I am very interested in Computer Science and programming and have decided to make the shift. Do you think I should first get an undergraduate degree in Computer Science or should I apply for a master's program? My programming skills are pretty decent, but I lack a lot of concrete knowledge in algorithms and data structures? Will a master's degree help me with the basics?

Read the article

SQL SERVER Difference Between GRANT and WITH GRANT

This was very interesting question recently asked me to during my session at TechMela Nepal. The question is what is the difference between GRANT and WITH GRANT when giving permissions to user.Let us first see syntax for the same.GRANT:USE master;GRANTVIEW ANY DATABASETO username;GOWITH GRANT:USE master;GRANTVIEW ANY DATABASETO username WITHGRANTOPTION;GOThe difference between both of this option [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

confusing about the postguaduate education.

- by user531661

i'm a junior studying software engineering. i like to do research on computer science but also to code some projects as a developer. i want to work for a famous company as a engineering or researcher after getting my graduate degree. and i expect that after working several years i can do some managerial roles. so which choice is the best for me? PhD in Computer Science, master in Computer science, PhD in software engineering or master in software engineering?

Read the article

Juju MySQL adding units vs adding new service with relation

- by user2291975

What's the point of adding units to MySQL? Why not just create a new service with relation to the master node? MySQL doesn't support multi-master node so adding units to one MySQL service doesn't make any sense. If I create a second service as a slave and add units to that to act as multiple slaves still doesn't make sense because if the primary slave server dies all the unites attached to it become useless as well. Can anyone explain why I should add units to MySQL?

Read the article

DRBD and MySQL - Heartbeat Setup

Heartbeat automates all the moving parts and can work as well with the MySQL master-master active/passive solution as well as it can with the MySQL & DRBD solution. It manages the virtual IP address used by the database, directs DRBD to become primary, or relinquish primary duties, mounts the /dev/drbd0 device, and starts/stops MySQL as needed.

Read the article

DRBD and MySQL - Heartbeat Setup

Heartbeat automates all the moving parts and can work as well with the MySQL master-master active/passive solution as well as it can with the MySQL & DRBD solution. It manages the virtual IP address used by the database, directs DRBD to become primary, or relinquish primary duties, mounts the /dev/drbd0 device, and starts/stops MySQL as needed.

Read the article

Using Apache FOP from .NET level

- by Lukasz Kurylo

In one of my previous posts I was talking about FO.NET which I was using to generate a pdf documents from XSL-FO. FO.NET is one of the .NET ports of Apache FOP. Unfortunatelly it is no longer maintained. I known it when I decidec to use it, because there is a lack of available (free) choices for .NET to render a pdf form XSL-FO. I hoped in this implementation I will find all I need to create a pdf file with my really simple requirements. FO.NET is a port from some old version of Apache FOP and I found really quickly that there is a lack of some features that I needed, like dotted borders, double borders or support for margins. So I started to looking for some alternatives. I didn’t try the NFOP, another port of Apache FOP, because I found something I think much more better, the IKVM.NET project. IKVM.NET it is not a pdf renderer. So what it is? From the project site: IKVM.NET is an implementation of Java for Mono and the Microsoft .NET Framework. It includes the following components: a Java Virtual Machine implemented in .NET a .NET implementation of the Java class libraries tools that enable Java and .NET interoperability In the simplest form IKVM.NET allows to use a Java code library in the C# code and vice versa. I tried to use an Apache FOP, the best I think open source pdf –> XSL-FO renderer written in Java from my project written in C# using an IKVM.NET and it work like a charm. In the rest of the post I want to show, how to prepare a .NET *.dll class library from Apache FOP *.jar’s with IKVM.NET and generate a simple Hello world pdf document. To start playing with IKVM.NET and Apache FOP we need to download their packages: IKVM.NET Apache FOP and then unpack them. From the FOP directory copy all the *.jar’s files from lib and build catalogs to some location, e.g. d:\fop. Second step is to build the *.dll library from these files. On the console execute the following comand: ikvmc –target:library –out:d:\fop\fop.dll –recurse:d:\fop The ikvmc is located in the bin subdirectory where you unpacked the IKVM.NET. You must execute this command from this catalog, add this path to the global variable PATH or specify the full path to the bin subdirectory. In no error occurred during this process, the fop.dll library should be created. Right now we can create a simple project to test if we can create a pdf file. So let’s create a simple console project application and add reference to the fop.dll and the IKVM dll’s: IKVM.OpenJDK.Core and IKVM.OpenJDK.XML.API. Full code to generate a pdf file from XSL-FO template: static void Main(string[] args) { //initialize the Apache FOP FopFactory fopFactory = FopFactory.newInstance(); //in this stream we will get the generated pdf file OutputStream o = new DotNetOutputMemoryStream(); try { Fop fop = fopFactory.newFop("application/pdf", o); TransformerFactory factory = TransformerFactory.newInstance(); Transformer transformer = factory.newTransformer(); //read the template from disc Source src = new StreamSource(new File("HelloWorld.fo")); Result res = new SAXResult(fop.getDefaultHandler()); transformer.transform(src, res); } finally { o.close(); } using (System.IO.FileStream fs = System.IO.File.Create("HelloWorld.pdf")) { //write from the .NET MemoryStream stream to disc the generated pdf file var data = ((DotNetOutputMemoryStream)o).Stream.GetBuffer(); fs.Write(data, 0, data.Length); } Process.Start("HelloWorld.pdf"); System.Console.ReadLine(); } Apache FOP be default using a Java’s Xalan to work with XML files. I didn’t find a way to replace this piece of code with equivalent from .NET standard library. If any error or warning will occure during generating the pdf file, on the console will ge shown, that’s why I inserted the last line in the sample above. The DotNetOutputMemoryStream this is my wrapper for the Java OutputStream. I have created it to have the possibility to exchange data between the .NET <-> Java objects. It’s implementation: class DotNetOutputMemoryStream : OutputStream { private System.IO.MemoryStream ms = new System.IO.MemoryStream(); public System.IO.MemoryStream Stream { get { return ms; } } public override void write(int i) { ms.WriteByte((byte)i); } public override void write(byte[] b, int off, int len) { ms.Write(b, off, len); } public override void write(byte[] b) { ms.Write(b, 0, b.Length); } public override void close() { ms.Close(); } public override void flush() { ms.Flush(); } } The last thing we need, this is the HelloWorld.fo template. <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <fo:layout-master-set> <fo:simple-page-master master-name="simple" page-height="29.7cm" page-width="21cm" margin-top="1.8cm" margin-bottom="0.8cm" margin-left="1.6cm" margin-right="1.2cm"> <fo:region-body margin-top="3cm"/> <fo:region-before extent="3cm"/> <fo:region-after extent="1.5cm"/> </fo:simple-page-master> </fo:layout-master-set> <fo:page-sequence master-reference="simple"> <fo:flow flow-name="xsl-region-body"> <fo:block font-size="18pt" color="black" text-align="center"> Hello, World! </fo:block> </fo:flow> </fo:page-sequence> </fo:root> I’m not going to explain how how this template is created, because this will be covered in the near future posts. Generated pdf file should look that:

Read the article

sell skimmed dump+pin([email protected])wu transfer,bank transfer,paypal+mailpass

- by bestseller

http://megareserve.blogspot.com///////// [email protected]////gmail:[email protected] Sell, Cvv, Bank Logins, Tracks, PayPal, Transfers, WU, Credit Cards, Card, Hacks, Citi, Boa, Visa, MasterCard, Amex, American Express, Make Money Fast, Stolen, Cc, C++, Adder, Western, Union, Banks, Of, America, Wellsfargo, Liberty, Reserve, Gram, Mg, LR, AlertPay ..PAYMENT METHOD LIBERTYRESERVE AND WESTERNUNION ONLY........ Ccv EU is $ 6 per ccv (Visa + Master) Ccv EU is $ 7 per ccv (Amex + Discover) Ccv Au is $ 6 per ccv Ccv Italy is 15 $ per cc sweden 12$ spain 10$ france 12$ Ccv US is $ 1.5 per ccv (Visa) Ccv US is $ 2 per ccv (master) Ccv US is $ 3 per ccv (Amex + Discover) Ccv UK is $ 5 per ccv (Visa + Master) Ccv UK is $ 6 per ccv (Amex + swith) Ccv Ca is $ 6 per ccv (Visa+ Master) Ccv Ca is $ 9 per ccv (Visa Business + Visa Gold) Ccv Germany is 14$ Per Ccv Ccv DOB with US is 15 $ per ccv Ccv DOB with UK is 19 $ per ccv Ccv DOB + BIN with UK 25$ per ccv Ccv US full info is 40 $ per ccv Ccv UK full info is 60 $ per ccv 1 Uk check bins= 12.5$/1cvv 1 Sock live = 1$/1sock live 5day yahoo:[email protected] gmail:[email protected] Balance In Chase:.........70K To 155K ========300$ Balance In Wachovia:.........24K To 80K==========180$ Balance In Boa..........75K To 450K==========400$ Balance In Credit Union:.........Any Amount:=========420$ Balance In Hallifax..........ANY AMOUNT=========420$ Balance In Compass..........ANY AMOUNT=========400$ Balance In Wellsfargo..........ANY AMOUNT=========400$ Balance In Barclays..........80K To 100K=========550$ Balance In Abbey:.........82K ==========650$ Balance in Hsbc:.........50K========650$ and more 1 Paypal with pass email = 50$/paypal 1 Paypal don't have pass email = 20$/Paypal 1 Banklogin us or uk (personel)= 550$ yahoo :[email protected] gmail :[email protected] Track 1/2 Visa Classic, MasterCard Standart US - 13$ UK - 17$ EU - 24$ AU - 26$ Track 1/2 Visa Gold | Platinum | Business | Signature, MasterCard Gold | Platinum US - 17$ UK - 20$ EU - 28$ AU - 30$ Bank transfer Balance 71.000$ CITIBANK SOUTH DAKOTA, N.A. Balance 65.000$ Wachovia: 76.000$ Abbey: 65.000£ Hsbc : 87.000$ Hallifax : 97.000£ Barclays: 110.000£ AHLI UNITED BANK --- 80.000£ LLOYDSTSB ---------- 100.000£ BANK OF SCOTLAND --- 123.000£ BOA ----------210.000$ UBS ---------- 152.000$ RBC BANK ------ 245.000$ BANK OF CANADA -------- 78.000$ BDC ---------- 281.000$ BANK LAURENTIENNE ----- 241.000$ please no test yahoo: [email protected] gmail: [email protected] website ; http://megareserve.blogspot.com Prices For Bin and Its List: 5434, 5419, 4670,374288,545140,454634,3791 with d.o.b,4049,4462,4921.4929.46274547,5506,5569,5404,5031,4921, 5505,5506,4921,4550 ,4552,4988,5186,4462,4543,4567 ,4539,5301,4929,5521 , 4291,5051,4975,5413 5255 4563,4547 4505,4563 5413 5255,5521,5506,4921,4929,54609 7,5609,54609,4543, 4975,5432,5187 ,4973,4627,4049,4779,426565,55 05, 5549, 5404, 5434, 5419, 4670,456730,541361, 451105,4670,5505, 5549, 5404, UK Nomall NO BINS(Serial) with DOB is :10$ UK with BINS(Serial) with DOB is :15$ UK Nomall no BINS(Serial) no DOB is: 6$ UK with BINS(Serial) is :12$ Please do not request : cc for TEST and FREE. DON'T CONTACT ME IF YOU NOT READY NEED TO BUY .

Read the article

Recipient address rejected: User unknown in local recipient table;

- by Thufir

I've gone through the guide for mailman with some difficulty, but seem to be nearly there. I'm able to navigate to the mailman web GUI, create lists and subscribe. I just subscribe my local FQDN, so [email protected] for testing purposes. This FQDN only works on localhost. However, e-mails to the list address, in this case [email protected], are rejected: root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 08:28:43 dur postfix/master[12208]: terminating on signal 15 Aug 28 08:28:44 dur postfix/postfix-script[12322]: starting the Postfix mail system Aug 28 08:28:44 dur postfix/master[12323]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:28:46 dur postfix/postfix-script[12332]: stopping the Postfix mail system Aug 28 08:28:46 dur postfix/master[12323]: terminating on signal 15 Aug 28 08:28:47 dur postfix/postfix-script[12437]: starting the Postfix mail system Aug 28 08:28:47 dur postfix/master[12438]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:29:29 dur postfix/smtpd[12460]: connect from localhost[127.0.0.1] Aug 28 08:29:30 dur postfix/smtpd[12460]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur.bounceme.net> Aug 28 08:29:33 dur postfix/smtpd[12460]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# ll /var/lib/mailman/data/ total 56 drwxrwsr-x 2 root list 4096 Aug 28 08:28 ./ drwxrwsr-x 8 root list 4096 Aug 27 19:58 ../ -rw-r--r-- 1 root list 0 Aug 28 04:36 aliases -rw-r--r-- 1 root list 12288 Aug 28 04:36 aliases.db -rw-r--r-- 1 root list 12288 Aug 28 08:28 aliases.db.db -rw-r----- 1 root list 41 Aug 27 21:04 creator.pw -rw-rw-r-- 1 root list 10 Aug 27 19:58 last_mailman_version -rw-r--r-- 1 root list 14100 Oct 19 2011 sitelist.cfg root@dur:~# root@dur:~# grep alias /etc/postfix/main.cf alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/var/lib/mailman/data/aliases.db #alias_database = hash:/etc/aliases root@dur:~# root@dur:~# postconf -n alias_database = hash:/var/lib/mailman/data/aliases.db alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = $myhostname localhost.$mydomain localhost $mydomain myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.example.com relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# Why is this e-mail rejected? It seems to, maybe be related to the alias_maps and alias_database settings in postfix.

Read the article

How to Create Features for Windows SharePoint Services 3.0

To customise a SharePoint (WSS 3.0) site, you'll need to understand 'Features'. The 'Feature' framework has become the most important method of customising a SharePoint site, because it is now defined by a list of Features, a layout page and a master page. One templated site can be turned into another by toggling Features and maybe switching the layout page or master page. Charles Lee explains.

Search Results

Search found 6455 results on 259 pages for 'master james'.

Page 48/259 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55 | Next Page >

- by Master

- by Master

- by James

- by James

- by Ben

- by Ben

- by user1391189

- by adaykin

- by Ruth Rettigo

- by Damien Joe

- by bendataclear

- by Summer

- by lego69

- by mbridge

- by NeilHambly

- by Girish

- by user531661

- by user2291975

- by Lukasz Kurylo

- by bestseller

- by Thufir

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55 | Next Page >